TN-VRTR-MIB

All MIBs › TN-VRTR-MIB

Organization: Nokia

Last Updated: 2015-09-14

Category: Carrier and Optical Transport, IP Routing, IP Routing and Multicast, Nokia Carrier Ethernet

Description: Covers configuration and routing parameters for virtual router instances on Nokia carrier Ethernet platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TN-VRTR-MIB?

This Nokia MIB manages Virtual Router (VRTR) instances on 7x50 SR-series service routers, covering the creation, naming, and administrative state of each virtual routing context along with global routing-resource limits. It exposes objects for the count of configured/active virtual routers, per-VRTR admin state and name, and global limits such as maximum ARP entries and route-threshold soak times for both IPv4 and IPv6. It supports monitoring of the software/control-plane configuration health of the routing platform, letting an admin confirm a virtual router is administratively up (vRtrAdminState) and track how close the device is to its configured ARP or routing-table scaling thresholds. It is part of Nokia's broader SROS routing MIB family that this module's objects (like per-VRTR interface and protocol state) tie into. It is typically deployed on Nokia 7x50 SR routers running multiple virtual routing/VPN contexts in service-provider networks. Engineers can download the TN-VRTR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TN-VRTR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia 7x50 SR-series service routers

Monitoring Examples

An operator would check vRtrConfiguredVRtrs against vRtrActiveVRtrs to confirm all provisioned virtual routers are actually up, then look at the vRtrConfTable (vRtrConfEntry) for a specific vRtrID to check vRtrAdminState and vRtrName. vRtrMaxARPEntries combined with the current ARP table size on that VRTR indicates how close the router is to an ARP-table scaling limit. vRtrRouteThresholdSoakTime and vRtrIPv6RouteThresholdSoakTime govern how long a route-count threshold must be exceeded before an alarm is raised, relevant when tuning alerting sensitivity.

What Can Be Monitored

configured vs active virtual router counts
per-VRTR admin state
ARP entry limits/usage
route threshold soak time settings

Imported Objects

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv4
InetAddressIPv6
InetAddressIPv6z
InetAddressPrefixLength
InetAddressType
InetAutonomousSystemNumber

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TestAndIncr
TimeInterval
TimeStamp
TruthValue

From TN-FILTER-MIB

TFilterID
TIPFilterID

From TN-TC-MIB

Dot1PPriority
IpAddressPrefixLength
TCIRRate
TCpmProtPolicyID
TDSCPValue
TDSCPValueOrNone
TFCNameOrEmpty
TFCType
TItemDescription
TItemLongDescription
TNamedItem
TNamedItemOrEmpty
TNetworkPolicyID
TPIRRate
TPolicyStatementNameOrEmpty
TPriority
TmnxAdminState
TmnxBgpAutonomousSystem
TmnxCustId
TmnxDHCP6MsgType
TmnxEnabledDisabled
TmnxEncapVal
TmnxMplsTpGlobalID
TmnxMplsTpNodeID
TmnxOperState
TmnxPortID
TmnxServId
TmnxStatus
TmnxTunnelID
TmnxTunnelType
TmnxVPNRouteDistinguisher
TmnxVRtrID
TmnxVRtrIDOrZero

From TROPIC-GLOBAL-REG

tnSRMIBModules	OBJECT-IDENTITY
tnSRNotifyPrefix	OBJECT-IDENTITY
tnSRObjs	OBJECT-IDENTITY

From TROPIC-SYSTEM-MIB

tnSysSwitchId

OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using vRtrStatIllegalLabels OID:

Select a Nokia 7x50 SR-series service router (virtual-router admin state/ARP-scaling status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type vRtrStatIllegalLabels into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports vRtrStatIllegalLabels indicates the number of illegally received labels on this virtual router. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
tnVRtrGlobalObjs	1.3.6.1.4.1.7483.6.1.2.3.15
tnVRtrMIBModule	1.3.6.1.4.1.7483.5.1.3.3			This document is the SNMP MIB module to manage and provision the Nokia SROS device transport and virtual routers, their interfaces, and other related features. Copyright 2003-2013 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tnVRtrMobGatewayObjs	1.3.6.1.4.1.7483.6.1.2.3.69
tnVRtrObjs	1.3.6.1.4.1.7483.6.1.2.3
INT vRiaBcastAddrFormat	1.3.6.1.4.1.7483.6.1.2.3.6.1.5	INTEGER	read-create	When vRiaBcastAddrFormat is set to 'allOnes', the 255.255.255.255 address is used for local broadcast. When vRiaBcastAddrFormat is set to 'hostOnes', the -1 address is used for the local broadcast. For example for subnet 10.10.16.0/20 the -1 address is 10.10.31.255.
U32 vRiaHoldUpTime	1.3.6.1.4.1.7483.6.1.2.3.6.1.23	Unsigned32	read-create	The value of vRiaHoldUpTime specifies the time to wait for the route to accept new state of the SRRP instance which is being tracked with this address. An 'inconsistentValue' error is returned if vRiaHoldUpTime is set to non-default value when vRiaTrackSrrpInstance is set to its default value.
T/F vRiaIgpInhibit	1.3.6.1.4.1.7483.6.1.2.3.6.1.7	TruthValue	read-create	This variable should only be associated with secondary ip addresses, i.e., when the value of vRiaIndex is other than 1. When vRiaIgpInhibit has a value of 'true', it indicates that the given secondary IP address should not be recognized as a local interface by the running IGP. For OSPF and IS-IS, this means that the given secondary IP addresses will not be injected as passive interfaces and will not be advertised as internal IP interfaces into the IGP's link state database. For RIP this means these secondary IP interfaces will not source RIP updates.
INT vRiaIndex	1.3.6.1.4.1.7483.6.1.2.3.6.1.1	INTEGER	not-accessible	The unique value which identifies this IP address entry for this interface of this virtual router in the Tmnx system. Those row entries with vRiaIndex = 1 represent the primary IP address for the interface identified by the vRtrID and vRtrIfIndex pair. Row entries with other values for vRiaIndex are secondary IP addresses. There must always be a primary IP address assigned an interface. This implies that if the primary address row is deleted, the secondary rows are also deleted.
IP vRiaInetAddress	1.3.6.1.4.1.7483.6.1.2.3.6.1.9	InetAddress	read-create	The type of this address is determined by the value of the vRiaInetAddressType object. vRiaInetAddress indicates the IPv4/IPv6 address assigned to a router's interface.
IPt vRiaInetAddressType	1.3.6.1.4.1.7483.6.1.2.3.6.1.8	InetAddressType	read-create	vRiaInetAddressType specifies the type of the vRiaInetAddress address assigned to a router's interface.
T/F vRiaInetAddrPreferred	1.3.6.1.4.1.7483.6.1.2.3.6.1.18	TruthValue	read-create	The value of vRiaInetAddrPreferred specifies whether vRiaInetAddress specified for this interface should be treated as preferred.
TMN vRiaInetAddrState	1.3.6.1.4.1.7483.6.1.2.3.6.1.11	TmnxInetAddrState	read-only	The value of vRiaInetAddrState indicates the address state of the IPv6 address of the interface.
T/F vRiaInetEui64	1.3.6.1.4.1.7483.6.1.2.3.6.1.12	TruthValue	read-create	The value of vRiaInetEui64 specifies whether the vRiaInetOperAddress is an eui64 address. This object can only be set at creation time. When vRiaInetEui64 is 'true', then the vRiaInetOperAddress is derived from the vRiaInetAddress and the physical address of the interface this address is attached to. vRiaInetAddress has to have all zeros the least significant 8 bytes. Also, vRiaInetPrefixLen cannot be longer than 64. When vRiaInetEui64 is 'false', then the vRiaInetOperAddress is a copy of vRiaInetAddress. The value is always 'false' when vRiaInetAddressType is not 'ipv6'.
IP vRiaInetGwAddress	1.3.6.1.4.1.7483.6.1.2.3.6.1.15	InetAddress	read-create	The value of vRiaInetGwAddress specifies the gateway address for the subnet specified by vRiaInetAddress and vRiaInetPrefixLen. The address type is defined by vRiaInetGwAddressType. This field is only valid when the address is configured on a subscriber interface.
IPt vRiaInetGwAddressType	1.3.6.1.4.1.7483.6.1.2.3.6.1.14	InetAddressType	read-create	The value of vRiaInetGwAddressType specifies the address type of vRiaInetGwAddress.
IP vRiaInetOperAddress	1.3.6.1.4.1.7483.6.1.2.3.6.1.13	InetAddress	read-only	The value of vRiaInetOperAddress indicates the operational address of this entry. The type of this address is determined by the value of the vRiaInetAddressType object.
ADR vRiaInetPrefixLen	1.3.6.1.4.1.7483.6.1.2.3.6.1.10	InetAddressPrefixLength	read-create	The value of vRiaInetPrefixLen specifies the length of the IP netmask for this interface address.
IP vRiaInetRemoteIp	1.3.6.1.4.1.7483.6.1.2.3.6.1.17	InetAddress	read-create	The value of vRiaInetRemoteIp specifies the IP address of the remote redundant interface. This field is only valid when the address is configured on a redundant interface.
IPt vRiaInetRemoteIpType	1.3.6.1.4.1.7483.6.1.2.3.6.1.16	InetAddressType	read-create	The value of vRiaInetRemoteIpType specifies the address type of vRiaInetRemoteIp.
IP vRiaIpAddress	1.3.6.1.4.1.7483.6.1.2.3.6.1.3	IpAddress	read-create	The IP address assigned to a router's interface.
IP vRiaNetMask	1.3.6.1.4.1.7483.6.1.2.3.6.1.4	IpAddress	read-create	The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0.
INT vRiaReasmMaxSize	1.3.6.1.4.1.7483.6.1.2.3.6.1.6	INTEGER	read-create	The size of the largest IP datagram which this entry can reassemble from incoming IP fragmented datagrams received on this interface.
ROW vRiaRowStatus	1.3.6.1.4.1.7483.6.1.2.3.6.1.2	RowStatus	read-create	The row status used for creation, deletion, or control of vRtrIpAddrTable entries. All the other row variables must have been assigned values before the row can be place into the 'active' state.
T/F vRiaSubscrHostRoutePopulate	1.3.6.1.4.1.7483.6.1.2.3.6.1.21	TruthValue	read-create	The value of vRiaSubscrHostRoutePopulate specifies if subscriber host routes are populated in the FIB (Forwarding Information Base). This object can only be set to 'true' if the address is configured on a subscriber interface.
T/F vRiaSubscrPrefix	1.3.6.1.4.1.7483.6.1.2.3.6.1.19	TruthValue	read-create	The value of vRiaSubscrPrefix specifies whether the vRiaIpAddress specified for this interface should be treated as a subscriber prefix. This object cannot be modified once the row is created.
BIT vRiaSubscrPrefixType	1.3.6.1.4.1.7483.6.1.2.3.6.1.20	Bits	read-create	The value of vRiaSubscrPrefixType indicates the type of subscriber prefix contained in vRiaIpAddress if vRiaSubscrPrefix is TRUE. This object cannot be modified once the row is created.
U32 vRiaTrackSrrpInstance	1.3.6.1.4.1.7483.6.1.2.3.6.1.22	Unsigned32	read-create	The value of vRiaTrackSrrpInstance specifies the SRRP instance whose state is tracked on this ipaddress.
G32 vRtrActiveVRtrs	1.3.6.1.4.1.7483.6.1.2.3.15.3	Gauge32	read-only	The value of vRtrActiveVRtrs indicates the current number of virtual routers in the system with vRtrAdminState equal 'inService'.
TMN vRtrAdminState	1.3.6.1.4.1.7483.6.1.2.3.1.1.3	TmnxAdminState	read-create	The desired administrative state for this virtual router. Note that it is not allowed to set vRtrAdminState to 'outOfService for the row entry with vRtrID = 1.
G32 vRtrAggregateActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.15	Gauge32	read-only	vRtrAggregateActiveRoutes indicates the current number of active aggregate routes for this instance of the route table.
G32 vRtrAggregateRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.14	Gauge32	read-only	vRtrAggregateRoutes indicates the current number of aggregate routes for this instance of the route table.
TMN vRtrAS	1.3.6.1.4.1.7483.6.1.2.3.1.1.12	TmnxBgpAutonomousSystem	read-create	The value of vRtrAS specifies the autonomous system number to be advertised to this peer. This object is MUST be set before BGP can be activated. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrAS4Byte.
INE vRtrAS4Byte	1.3.6.1.4.1.7483.6.1.2.3.1.1.59	InetAutonomousSystemNumber	read-create	The value of vRtrAS4Byte specifies the autonomous system number to be advertised to this peer. This object MUST be set before BGP can be activated.
G32 vRtrBGPActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.9	Gauge32	read-only	vRtrBGPActiveRoutes indicates the current number of active bgp routes for this instance of the route table.
G32 vRtrBGPRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.8	Gauge32	read-only	vRtrBGPRoutes indicates the current number of bgp routes for this instance of the route table.
TMN vRtrBgpStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.6	TmnxStatus	read-create	The desired state for BGP on this virtual router. An attempt to set vRtrBgpStatus to 'delete' will fail if the BGP protocol is not in the administrative outOfService state.
TMN vRtrConfederationAS	1.3.6.1.4.1.7483.6.1.2.3.1.1.18	TmnxBgpAutonomousSystem	read-create	The value of vRtrConfederationAS specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrConfederationAS4Byte.
INE vRtrConfederationAS4Byte	1.3.6.1.4.1.7483.6.1.2.3.1.1.60	InetAutonomousSystemNumber	read-create	The value of vRtrConfederationAS4Byte specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS.
vRtrConfEntry	1.3.6.1.4.1.7483.6.1.2.3.1.1		not-accessible	Each row entry represents a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing vRtrRowStatus, vRtrName and vRtrType. Note that rows in this table are usually created by the agent itself as a side affect of some other configuration; for example, when a service vprn is created by setting the appropriate objects in the TN-SERV-MIB. There will always be at least two row entries in this table, one of these entries represents the base or transport router and the other represents the management router. These entries are created when the system is initialized and can never be deleted.
G32 vRtrConfiguredVRtrs	1.3.6.1.4.1.7483.6.1.2.3.15.2	Gauge32	read-only	The value of vRtrConfiguredVRtrs indicates the current number of virtual routers configured in the system and represented as rows in the vRtrConfTable.
U32 vRtrConfScalar1	1.3.6.1.4.1.7483.6.1.2.3.101	Unsigned32	read-only	A dummy scalar that satisfies a SNMP get request quickly.Otherwise, it has to traverse the remaining MIB to get to the next applicable item.
U32 vRtrConfScalar2	1.3.6.1.4.1.7483.6.1.2.3.102	Unsigned32	read-only
vRtrConfTable	1.3.6.1.4.1.7483.6.1.2.3.1		not-accessible	The vRtrConfTable has an entry for each virtual router configured in the system.
TMN vRtrCustId	1.3.6.1.4.1.7483.6.1.2.3.1.1.30	TmnxCustId	read-only	When vRtrType has a value of 'vprn', the value of vRtrCustId indicates the customer-id of the associated service that created this row entry.
TIT vRtrDescription	1.3.6.1.4.1.7483.6.1.2.3.1.1.25	TItemDescription	read-create	The value of vRtrDescription is a user provided description string for this virtual router. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
G32 vRtrDirectActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.3	Gauge32	read-only	vRtrDirectActiveRoutes indicates the current number of active direct routes for this instance of the route table.
G32 vRtrDirectRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.2	Gauge32	read-only	vRtrDirectRoutes indicates the current number of direct routes for this instance of the route table.
U32 vRtrEcmpMaxRoutes	1.3.6.1.4.1.7483.6.1.2.3.1.1.11	Unsigned32	read-create	The value of vRtrEcmpMaxRoutes specifies the maximum number of equal cost routes allowed on this routing table instance. When the number ecmp routes available at the best preference value exceed the number of vRtrEcmpMaxRoutes allowed, then the lowest next-hop IP address algorithm is used to select the ecmp routes used. When vRtrEcmpMaxRoutes is set to zero (0), and multiple routes are available with the same best preference value and equal cost values, then the route with the lowest next-hop IP address is used.
T/F vRtrGracefulRestart	1.3.6.1.4.1.7483.6.1.2.3.1.1.26	TruthValue	read-create	The value of vRtrGracefulRestart indicates whether or not graceful restart capabilities are enabled on this virtual router. In order for any protocol to perform graceful restart vRtrGracefulRestart must have a value of 'true'. Graceful restart capabilities can then be enabled or disabled on an individual protocol basis.
INT vRtrGracefulRestartType	1.3.6.1.4.1.7483.6.1.2.3.1.1.27	INTEGER	read-create	The value of vRtrGracefulRestartType specifies when to include grace restart of routing protocols as a result of a switchover from primary CPM in a redundant system. 'never' - always switch without graceful restart 'manual' - perform graceful restart only on a forced switchover 'automatic' - perform graceful restart on either a switchover caused by an error or a forced switchover
U32 vRtrHighRouteThreshold	1.3.6.1.4.1.7483.6.1.2.3.1.1.21	Unsigned32	read-only	The value of vRtrHighRouteThreshold specifies the high-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrHighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
G32 vRtrHostActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.63	Gauge32	read-only	The value of vRtrHostActiveRoutes indicates the current number of active direct routes with prefix value 32 for this instance of the route table.
G32 vRtrHostRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.62	Gauge32	read-only	The value of vRtrHostRoutes indicates the current number of direct routes with prefix value 32 for this instance of the route table.
TMN vRtrID	1.3.6.1.4.1.7483.6.1.2.3.1.1.1	TmnxVRtrID	accessible-for-notify	The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router.
IP vRtrIfAdminLinkLocalAddr	1.3.6.1.4.1.7483.6.1.2.3.4.1.76	InetAddress	read-create	The value of vRtrIfAdminLinkLocalAddr specifies the link local IP address of this virtual router interface.
IPt vRtrIfAdminLinkLocalAddrType	1.3.6.1.4.1.7483.6.1.2.3.4.1.75	InetAddressType	read-create	The value of vRtrIfAdminLinkLocalAddrType specifies the IP address type of the link local address of this virtual router interface.
TMN vRtrIfAdminState	1.3.6.1.4.1.7483.6.1.2.3.4.1.8	TmnxAdminState	read-create	The desired administrative state for this router interface.
T/F vRtrIfAdmLnkLclAddrPreferred	1.3.6.1.4.1.7483.6.1.2.3.4.1.77	TruthValue	read-create	The value of vRtrIfAdmLnkLclAddrPreferred specifies whether vRtrIfAdminLinkLocalAddr specified for this interface should be treated as preferred.
STR vRtrIfAlias	1.3.6.1.4.1.7483.6.1.2.3.4.1.10	DisplayString	read-create	An alternative administrative name assigned this router interface.
INT vRtrIfArpPopulate	1.3.6.1.4.1.7483.6.1.2.3.4.1.38	INTEGER	read-create	The value of the object vRtrIfArpPopulate specifies the ARP populate action. The value disabled means that the normal ARP protocol is active. The value enabled means that the system will not originate ARP requests on this interface. The ARP cache is only populated with MAC addresses learned via the DHCP protocol. If the value of vRtrIfType is network, this object can only be set to disabled.
U32 vRtrIfArpTimeout	1.3.6.1.4.1.7483.6.1.2.3.4.1.12	Unsigned32	read-create	The value of vRtrIfArpTimeout determines how long an ARP entry associated with this interface remains in the ARP cache. When vRtrIfArpTimeout has a value of zero, '0', the entry will never be cleared from the cache.
IPt vRtrIfBfdExtAddressType	1.3.6.1.4.1.7483.6.1.2.3.71.1.1	InetAddressType	not-accessible	The value of vRtrIfBfdExtAddressType indicates the IP address type of the BFD configuration of this interface. vRtrIfBfdExtAddressType supports only InetAddressType values 'ipv4 (1)' and 'ipv6 (2)'.
TMN vRtrIfBfdExtAdminState	1.3.6.1.4.1.7483.6.1.2.3.71.1.2	TmnxAdminState	read-write	The value of vRtrIfBfdExtAdminState specifies the admin state of BFD on this interface. When the value of vRtrIfBfdExtAdminState is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot.
U32 vRtrIfBfdExtEchoInterval	1.3.6.1.4.1.7483.6.1.2.3.71.1.6	Unsigned32	read-write	The value of vRtrIfBfdExtEchoInterval specifies the BFD echo interval over this interface.
vRtrIfBfdExtEntry	1.3.6.1.4.1.7483.6.1.2.3.71.1		not-accessible	Each row entry represents the BFD configuration for the vRtrIfIndex.
U32 vRtrIfBfdExtMultiplier	1.3.6.1.4.1.7483.6.1.2.3.71.1.5	Unsigned32	read-write	The value of vRtrIfBfdExtMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault.
U32 vRtrIfBfdExtReceiveInterval	1.3.6.1.4.1.7483.6.1.2.3.71.1.4	Unsigned32	read-write	The value of vRtrIfBfdExtReceiveInterval specifies the BFD receive interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdExtType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds.
vRtrIfBfdExtTable	1.3.6.1.4.1.7483.6.1.2.3.71		not-accessible	The vRtrIfBfdExtTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfIndex.
TIM vRtrIfBfdExtTableLastChanged	1.3.6.1.4.1.7483.6.1.2.3.70	TimeStamp	read-only	The value of vRtrIfBfdExtTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrIfBfdExtTable by adding, deleting an entry or change to a writable object in the table.
U32 vRtrIfBfdExtTransmitInterval	1.3.6.1.4.1.7483.6.1.2.3.71.1.3	Unsigned32	read-write	The value of vRtrIfBfdExtTransmitInterval specifies the BFD transmit interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdExtType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds.
INT vRtrIfBfdExtType	1.3.6.1.4.1.7483.6.1.2.3.71.1.7	INTEGER	read-write	The value of vRtrIfBfdExtType specifies the configured termination of a BFD session on this interface. The value of 'cpmNp(1)' specifies termination on the CPM card's Network Processor. The value of 'auto(2)' specifies a system-selected termination other than the CPM Network Processor.
C32 vRtrIfBfdSessExtDownCount	1.3.6.1.4.1.7483.6.1.2.3.92.1.15	Counter32	read-only	The value of vRtrIfBfdSessExtDownCount indicates the number of times vRtrIfBfdSessExtOperState changed from 'inService' to 'outOfService'.
vRtrIfBfdSessExtEntry	1.3.6.1.4.1.7483.6.1.2.3.92.1		not-accessible	Each row entry represents a BFD session. Entries are created automatically by the system, or when a static-route is configured to use BFD.
TIM vRtrIfBfdSessExtLastDownTime	1.3.6.1.4.1.7483.6.1.2.3.92.1.12	TimeStamp	read-only	The value of vRtrIfBfdSessExtLastDownTime indicates the system time when this session last went down.
TIM vRtrIfBfdSessExtLastRecv	1.3.6.1.4.1.7483.6.1.2.3.95.1.13	TimeStamp	read-only	The value of vRtrIfBfdSessExtLastRecv indicates the time of last received CC/CV message relative to the system uptime.
TIM vRtrIfBfdSessExtLastSent	1.3.6.1.4.1.7483.6.1.2.3.95.1.14	TimeStamp	read-only	The value of vRtrIfBfdSessExtLastSent indicates the time of last sent CC/CV message relative to the system uptime.
TIM vRtrIfBfdSessExtLastUpTime	1.3.6.1.4.1.7483.6.1.2.3.92.1.13	TimeStamp	read-only	The value of vRtrIfBfdSessExtLastUpTime indicates the system time when this session last came up.
IP vRtrIfBfdSessExtLclAddr	1.3.6.1.4.1.7483.6.1.2.3.92.1.4	InetAddress	not-accessible	The value of vRtrIfBfdSessExtLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessExtLclAddrType.
IPt vRtrIfBfdSessExtLclAddrType	1.3.6.1.4.1.7483.6.1.2.3.92.1.3	InetAddressType	not-accessible	The value of vRtrIfBfdSessExtLclAddrType indicates the address type in vRtrIfBfdSessExtLclAddr.
INT vRtrIfBfdSessExtLclDiag	1.3.6.1.4.1.7483.6.1.2.3.95.1.3	INTEGER	read-only	The value of vRtrIfBfdSessExtLclDiag indicates the local diag code of the BFD session.
U32 vRtrIfBfdSessExtLclDisc	1.3.6.1.4.1.7483.6.1.2.3.92.1.16	Unsigned32	read-only	The value of vRtrIfBfdSessExtLclDisc indicates the unique local discriminator for this session.
U32 vRtrIfBfdSessExtLclMinRx	1.3.6.1.4.1.7483.6.1.2.3.95.1.5	Unsigned32	read-only	The value of vRtrIfBfdSessExtLclMinRx indicates the local (minimum) receive interval for BFD CC packets in milliseconds.
U32 vRtrIfBfdSessExtLclMinTx	1.3.6.1.4.1.7483.6.1.2.3.95.1.4	Unsigned32	read-only	The value of vRtrIfBfdSessExtLclMinTx indicates the local (minimum) transmit interval for BFD CC packets in milliseconds.
INT vRtrIfBfdSessExtLclMode	1.3.6.1.4.1.7483.6.1.2.3.95.1.2	INTEGER	read-only	The value of vRtrIfBfdSessExtLclMode indicates the local mode of the BFD session.
U32 vRtrIfBfdSessExtLclMult	1.3.6.1.4.1.7483.6.1.2.3.95.1.6	Unsigned32	read-only	The value of vRtrIfBfdSessExtLclMult indicates the local multiplier value for CC packets
INT vRtrIfBfdSessExtLclState	1.3.6.1.4.1.7483.6.1.2.3.95.1.1	INTEGER	read-only	The value of vRtrIfBfdSessExtLclState indicates the local state of the BFD session.
INT vRtrIfBfdSessExtLinkType	1.3.6.1.4.1.7483.6.1.2.3.92.1.1	INTEGER	not-accessible	The value of vRtrIfBfdSessExtLinkType indicates the link type of the BFD session.
INT vRtrIfBfdSessExtLspPathId	1.3.6.1.4.1.7483.6.1.2.3.92.1.30	INTEGER	read-only	The value of vRtrIfBfdSessExtLspPathId indicates the source path index for the MPLS-TP LSP path. notApplicable (0) - Indicates vRtrIfBfdSessExtLinkType is neither 'ccOnly' or 'ccWithCv'. working (1) - A working path is the primary path for the LSP. protecting (2) - A protection path is the secondary path for the LSP.
U32 vRtrIfBfdSessExtLspPathTunnelId	1.3.6.1.4.1.7483.6.1.2.3.92.1.29	Unsigned32	read-only	The value of vRtrIfBfdSessExtLspPathTunnelId indicates the source tunnel id for the MPLS-TP path.
C32 vRtrIfBfdSessExtMesgRecv	1.3.6.1.4.1.7483.6.1.2.3.92.1.10	Counter32	read-only	The value of vRtrIfBfdSessExtMesgRecv indicates the number of messages received in this session. This object is applicable if vRtrIfBfdSessExtType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned.
C32 vRtrIfBfdSessExtMesgSent	1.3.6.1.4.1.7483.6.1.2.3.92.1.11	Counter32	read-only	The value of vRtrIfBfdSessExtMesgSent indicates the number of messages sent in this session. This object is applicable if vRtrIfBfdSessExtType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned.
BIT vRtrIfBfdSessExtOperFlags	1.3.6.1.4.1.7483.6.1.2.3.92.1.9	Bits	read-only	The value of vRtrIfBfdSessExtOperFlags indicates the reasons why a BFD session is not up.
TMN vRtrIfBfdSessExtOperState	1.3.6.1.4.1.7483.6.1.2.3.92.1.7	TmnxOperState	read-only	The value of vRtrIfBfdSessExtOperState indicates the operational state of BFD on this interface.
BIT vRtrIfBfdSessExtProtocols	1.3.6.1.4.1.7483.6.1.2.3.92.1.18	Bits	read-only	The value of vRtrIfBfdSessExtProtocols indicates which protocols are using this BFD session.
IP vRtrIfBfdSessExtRemAddr	1.3.6.1.4.1.7483.6.1.2.3.92.1.6	InetAddress	not-accessible	The value of vRtrIfBfdSessExtRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessExtRemAddrType.
IPt vRtrIfBfdSessExtRemAddrType	1.3.6.1.4.1.7483.6.1.2.3.92.1.5	InetAddressType	not-accessible	The value of vRtrIfBfdSessExtRemAddrType indicates the address type in vRtrIfBfdSessExtRemAddr.
INT vRtrIfBfdSessExtRemDiag	1.3.6.1.4.1.7483.6.1.2.3.95.1.9	INTEGER	read-only	The value of vRtrIfBfdSessExtRemDiag indicates the remote diag code of the BFD session.
U32 vRtrIfBfdSessExtRemDisc	1.3.6.1.4.1.7483.6.1.2.3.92.1.17	Unsigned32	read-only	The value of vRtrIfBfdSessExtRemDisc indicates the remote discriminator for this session.
U32 vRtrIfBfdSessExtRemMinRx	1.3.6.1.4.1.7483.6.1.2.3.95.1.11	Unsigned32	read-only	The value of vRtrIfBfdSessExtRemMinRx indicates the remote (minimum) receive interval for BFD CC packets.
U32 vRtrIfBfdSessExtRemMinTx	1.3.6.1.4.1.7483.6.1.2.3.95.1.10	Unsigned32	read-only	The value of vRtrIfBfdSessExtRemMinTx indicates the remote (minimum) transmit interval for BFD CC packets.
INT vRtrIfBfdSessExtRemMode	1.3.6.1.4.1.7483.6.1.2.3.95.1.8	INTEGER	read-only	The value of vRtrIfBfdSessExtRemMode indicates the remote mode of the BFD session.
U32 vRtrIfBfdSessExtRemMult	1.3.6.1.4.1.7483.6.1.2.3.95.1.12	Unsigned32	read-only	The value of vRtrIfBfdSessExtRemMult indicates the remote multiplier value for CC packets
TMN vRtrIfBfdSessExtRemoteGlobalId	1.3.6.1.4.1.7483.6.1.2.3.92.1.28	TmnxMplsTpGlobalID	read-only	The value of vRtrIfBfdSessExtRemoteGlobalId specifies the global identifier for an MPLS-TP LSP.
U32 vRtrIfBfdSessExtRemoteLspNum	1.3.6.1.4.1.7483.6.1.2.3.92.1.25	Unsigned32	read-only	The value of vRtrIfBfdSessExtRemoteLspNum specifies the MPLS-TP LSP destination path number.
TMN vRtrIfBfdSessExtRemoteNodeId	1.3.6.1.4.1.7483.6.1.2.3.92.1.27	TmnxMplsTpNodeID	read-only	The value of vRtrIfBfdSessExtRemoteNodeId specifies the destination node id of an MPLS-TP LSP.
U32 vRtrIfBfdSessExtRemoteTunnelNum	1.3.6.1.4.1.7483.6.1.2.3.92.1.26	Unsigned32	read-only	The value of vRtrIfBfdSessExtRemoteTunnelNum indicates the destination tunnel id for the MPLS-TP path.
INT vRtrIfBfdSessExtRemState	1.3.6.1.4.1.7483.6.1.2.3.95.1.7	INTEGER	read-only	The value of vRtrIfBfdSessExtRemState indicates the remote state of the BFD session.
U32 vRtrIfBfdSessExtRxInfoId	1.3.6.1.4.1.7483.6.1.2.3.92.1.2	Unsigned32	not-accessible	The value of vRtrIfBfdSessExtRxInfoId indicates the incoming label id or port id.
U32 vRtrIfBfdSessExtRxInterval	1.3.6.1.4.1.7483.6.1.2.3.92.1.20	Unsigned32	read-only	The value of vRtrIfBfdSessExtRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdExtReceiveInterval' and the remote node's transmit interval.
INT vRtrIfBfdSessExtState	1.3.6.1.4.1.7483.6.1.2.3.92.1.8	INTEGER	read-only	The value of vRtrIfBfdSessExtState indicates the state of the BFD protocol on this interface.
vRtrIfBfdSessExtTable	1.3.6.1.4.1.7483.6.1.2.3.92		not-accessible	The vRtrIfBfdSessExtTable table contains per BFD session statistics and operational settings.
U32 vRtrIfBfdSessExtTimeSinceLastRx	1.3.6.1.4.1.7483.6.1.2.3.92.1.23	Unsigned32	read-only	The value of vRtrIfBfdSessExtTimeSinceLastRx indicates the number of milliseconds elapsed since the most recent message was received on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessExtType equal to 'cpmNp(3)'. Otherwise, zero is returned.
U32 vRtrIfBfdSessExtTimeSinceLastTx	1.3.6.1.4.1.7483.6.1.2.3.92.1.24	Unsigned32	read-only	The value of vRtrIfBfdSessExtTimeSinceLastTx indicates the number of milliseconds elapsed since the most recent message was transmitted on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessExtType equal to 'cpmNp(3)'. Otherwise, zero is returned.
U32 vRtrIfBfdSessExtTxInterval	1.3.6.1.4.1.7483.6.1.2.3.92.1.19	Unsigned32	read-only	The value of vRtrIfBfdSessExtTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdExtTransmitInterval' and the remote node's receive interval.
INT vRtrIfBfdSessExtType	1.3.6.1.4.1.7483.6.1.2.3.92.1.21	INTEGER	read-only	The value of vRtrIfBfdSessExtType indicates the termination of the BFD session, as follows: 'iom (1)' - termination on the IOM card main processor, 'cpm (2)' - termination on the CPM card main processor, 'cpmNp (3)' - termination on the CPM card Network Processor.
C32 vRtrIfBfdSessExtUpCount	1.3.6.1.4.1.7483.6.1.2.3.92.1.14	Counter32	read-only	The value of vRtrIfBfdSessExtUpCount indicates the number of times vRtrIfBfdSessExtOperState changed from 'outOfService' to 'inService'.
C32 vRtrIfBfdSessExtVerMismatch	1.3.6.1.4.1.7483.6.1.2.3.92.1.22	Counter32	read-only	The value of vRtrIfBfdSessExtVerMismatch indicates the number of version mismatch errors for the bfd session.
vRtrIfBfdSessForwardInfoEntry	1.3.6.1.4.1.7483.6.1.2.3.95.1		not-accessible	Each row entry represents a collection of forwarding information attributes for each BFD session. Entries cannot be created and deleted via SNMP SET operations.
vRtrIfBfdSessForwardInfoTable	1.3.6.1.4.1.7483.6.1.2.3.95		not-accessible	The vRtrIfBfdSessForwardInfoTable table contains per BFD session forwarding information. (local and remote)
INT vRtrIfCflowd	1.3.6.1.4.1.7483.6.1.2.3.4.1.32	INTEGER	read-create	The value of vRtrIfCflowd specifies the type and direction of Cflowd analysis applied to this interface. A Cflowd profile controls the sampling and analysis of data flows through the router. A value of 'none (1)' indicates that there is no Cflowd analysis associated with this interface.
U32 vRtrIfChannelID	1.3.6.1.4.1.7483.6.1.2.3.4.1.6	Unsigned32	read-create	When the physical port, vRtrIfPortID, is a SONET port, vRtrIfChannelID is the STSx channel number used by this interface. If vRtrIfPortID is not a SONET port or the interface has not yet been bound to a physical port, vRtrIfChannelID will be zero (0). This object was obsoleted in release 5.0.
TCP vRtrIfCpmProtPolicyId	1.3.6.1.4.1.7483.6.1.2.3.4.1.68	TCpmProtPolicyID	read-create	The value of vRtrIfCpmProtPolicyId associates a CPM Protection policy with an interface. A value of zero (0) specifies that no CPM Protection policy is associated with this interface. A value of one (1) specifies that the default CPM Protection policy is associated with this interface. If no value for vRtrIfCpmProtPolicyId is specified when the vRtrIfEntry is created, the system assigns a default value, derived from the value of the object vRtrIfType, as follows: vRtrIfType vRtrIfCpmProtPolicyId --------------------------------------------------------------------- network 1 service used internally. serviceIes 1 serviceRtdVpls obsoleted. serviceVprn 1 serviceIesSubscriber 0 serviceIesGroup 0 serviceVprnSubscriber used internally. serviceVprnGroup 0 serviceIesRedundant 0 serviceVprnRedundant 0 serviceVpls 0 serviceIesCem defined on a SAP. --not supported serviceVprnCem defined on a SAP. --not supported serviceVprnIPsec 0 serviceVprnIPMirror 0 If an interface would get a default value of 'one', it is not allowed to set the value of vRtrIfCpmProtPolicyId to 'zero'. If an interface would get a default value of 'zero', it is not allowed to modify the value of vRtrIfCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of TN-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TN-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
G32 vRtrIfCpmProtUncfgdProtoDropCnt	1.3.6.1.4.1.7483.6.1.2.3.4.1.69	Gauge32	read-only	The value of vRtrIfCpmProtUncfgdProtoDropCnt indicates the number of network control protocol messages dropped due to the operation of the protocol protection facility. The protocol protection facility can be enabled and disabled by means of the object TN-SECURITY-MIB::tmnxCpmProtDropUncfgdProtocolMsg. When the protocol protection facility is enabled, network control protocol traffic received on this virtual router interface is dropped if the protocol is not configured on this virtual router interface. The value of vRtrIfProtocol indicates which protocols are configured on this virtual router interface. This object is not supported on SR-1 and ESS-1, where the value of TN-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TN-CHASSIS-MIB::tmnxChassisType is '7' or '9'.
U32 vRtrIfDelaySeconds	1.3.6.1.4.1.7483.6.1.2.3.4.1.64	Unsigned32	read-create	The value of vRtrIfDelaySeconds specifies the time in seconds that is used to bring up the interface. When interface comes up, it will not become operational until after the specified delay. When used to configure delayed-enable for a router interface, the values specified for vRtrIfDelaySeconds can be in the range of 0..1200. When used to configure hold-time of a Multi-homing secondary interface, the values specified can be in the range of 0..65535. The default value of vRtrIfDelaySeconds is also based on the router interface type. When used for a regular interface its default value is 0. When used for a Multi-homing secondary interface, its default value is 30.
I32 vRtrIfDelayUpTimer	1.3.6.1.4.1.7483.6.1.2.3.4.1.65	Integer32	read-only	The value of vRtrIfDelayUpTimer indicates the time left before the interface comes up when vRtrIfDelaySeconds is configured to a non-zero value. When the interface is down, this object will return the value -1. It's value can be in the range 0 to vRtrIfDelaySeconds's value if the interface is 'about to come up'. If the interface is up, the value of vRtrIfDelayUpTimer will be 0.
TIT vRtrIfDescription	1.3.6.1.4.1.7483.6.1.2.3.4.1.34	TItemLongDescription	read-create	The value of vRtrIfDescription is a user provided description string for this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length.
T/F vRtrIfDirectedBroadcast	1.3.6.1.4.1.7483.6.1.2.3.4.1.29	TruthValue	read-create	When vRtrIfDirectedBroadcast is set to 'true', allows broadcasts directed to this interface to be accepted. When 'false', directed broadcasts are dropped. This is of particular use when preventing denial of service attacks.
TIP vRtrIfEgressFilterId	1.3.6.1.4.1.7483.6.1.2.3.4.1.28	TIPFilterID	read-create	The value of vRtrIfEgressFilterId associates an ip-filter-id with an egress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TMN vRtrIfEncapValue	1.3.6.1.4.1.7483.6.1.2.3.4.1.7	TmnxEncapVal	read-create	The value of the label used along with vRtrIfPortID to identify a SAP on the specified access port.
vRtrIfEntry	1.3.6.1.4.1.7483.6.1.2.3.4.1		not-accessible	Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable.
vRtrIfExtEntry	1.3.6.1.4.1.7483.6.1.2.3.61.1		not-accessible	Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable.
vRtrIfExtTable	1.3.6.1.4.1.7483.6.1.2.3.61		not-accessible	The vRtrIfExtTable has an entry for each router interface configured in the system. This table augments the vRtrIfTable.
U32 vRtrIfGlobalIndex	1.3.6.1.4.1.7483.6.1.2.3.4.1.63	Unsigned32	read-only	The value of vRtrIfGlobalIndex uniquely identifies this interface in the tmnx system. This field provides an identifier for router interfaces similar to the vRtrIfIndex value, except that vRtrIfIndex is unique within each virtual router. The vRtrIfGlobalIndex is unique system wide regardless of the vRtrID. The vRtrIfGlobalIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
vRtrIfGlobalIndexEntry	1.3.6.1.4.1.7483.6.1.2.3.37.1		not-accessible	Each row entry in the vRtrIfGlobalIndexTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
vRtrIfGlobalIndexTable	1.3.6.1.4.1.7483.6.1.2.3.37		not-accessible	This is a read-only table, each row of which represents a one to one equivalence between a unique system wide router interface index (vRtrIfGlobalIndex) and its corresponding virtual router ID (vRtrID) and index in the vRtrIfTable (vRtrIfIndex).
TMN vRtrIfGlobalIndexvRtrID	1.3.6.1.4.1.7483.6.1.2.3.37.1.1	TmnxVRtrID	read-only	The value of vRtrIfGlobalIndexvRtrID indicates the vRtrID that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex. This value represents the specific instance of virtual router which the vRtrIfGlobalIndex belongs to.
NUM vRtrIfGlobalIndexvRtrIfIndex	1.3.6.1.4.1.7483.6.1.2.3.37.1.2	InterfaceIndex	read-only	The value of vRtrIfGlobalIndexvRtrIfIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex.
T/F vRtrIfIcmpMaskReply	1.3.6.1.4.1.7483.6.1.2.3.4.1.13	TruthValue	read-create	When vRtrIfIcmpMaskReply is set to 'true', a reply will be issued when this node is requested for the network mask for this subnet. The requesting node must be attached to the local network. When vRtrIfIcmpMaskReply is set to 'false', no reply is issued if an ICMP mask request is received.
U32 vRtrIfIcmpNumRedirects	1.3.6.1.4.1.7483.6.1.2.3.4.1.15	Unsigned32	read-create	The value of vRtrIfIcmpNumRedirects limits the number of redirects issued per the time frame specified in vRtrIfIcmpRedirectsTime.
U32 vRtrIfIcmpNumTtlExpired	1.3.6.1.4.1.7483.6.1.2.3.4.1.21	Unsigned32	read-create	The value of vRtrIfIcmpNumTtlExpired defines how many ttl-expired messages will be issued in the time frame specified by vRtrIfIcmpTtlExpiredTime.
U32 vRtrIfIcmpNumUnreachables	1.3.6.1.4.1.7483.6.1.2.3.4.1.18	Unsigned32	read-create	The value of vRtrIfIcmpNumUnreachables determines how many destination unreachable messages are issued in the time frame specified by vRtrIfIcmpUnreachablesTime.
T/F vRtrIfIcmpRedirects	1.3.6.1.4.1.7483.6.1.2.3.4.1.14	TruthValue	read-create	When vRtrIfIcmpRedirects is set to 'true', ICMP redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpRedirects is set to 'false', ICMP redirects are not generated.
U32 vRtrIfIcmpRedirectsTime	1.3.6.1.4.1.7483.6.1.2.3.4.1.16	Unsigned32	read-create	The value of vRtrIfIcmpRedirectsTime determines the time frame in seconds that is used to limit the number of redirects issued per time frame.
T/F vRtrIfIcmpTtlExpired	1.3.6.1.4.1.7483.6.1.2.3.4.1.20	TruthValue	read-create	When vRtrIfIcmpTtlExpired is set to 'true', the rate that ttl-expired messages by this interface is throttled based on the values of vRtrIfIcmpNumTtlExpired and vRtrIfIcmpTtlExpiredTime. When vRtrIfIcmpTtlExpired is set to 'false', unlimited ttl-expired messages are sent.
U32 vRtrIfIcmpTtlExpiredTime	1.3.6.1.4.1.7483.6.1.2.3.4.1.22	Unsigned32	read-create	The value of vRtrIfIcmpTtlExpiredTime sets the time frame in seconds that is used to limit the number of ttl-expired messages issued by this interface with the specified time frame.
T/F vRtrIfIcmpUnreachables	1.3.6.1.4.1.7483.6.1.2.3.4.1.17	TruthValue	read-create	When vRtrIfIcmpUnreachables is set to 'true', ICMP host and network unreachable messages are generated by this interface. When vRtrIfIcmpUnreachables is set to 'false', ICMP host and network unreachable messages are not sent.
U32 vRtrIfIcmpUnreachablesTime	1.3.6.1.4.1.7483.6.1.2.3.4.1.19	Unsigned32	read-create	The value of vRtrIfIcmpUnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable messages issued per time frame.
U32 vRtrIfIcmpV6NumParamProblem	1.3.6.1.4.1.7483.6.1.2.3.4.1.56	Unsigned32	read-create	The value of vRtrIfIcmpV6NumParamProblem specifies how many parameter-problem ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6ParamProblemTime.
U32 vRtrIfIcmpV6NumPktTooBig	1.3.6.1.4.1.7483.6.1.2.3.4.1.53	Unsigned32	read-create	The value of vRtrIfIcmpV6NumPktTooBig specifies how many packet-too-big ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6PktTooBigTime.
U32 vRtrIfIcmpV6NumRedirects	1.3.6.1.4.1.7483.6.1.2.3.4.1.44	Unsigned32	read-create	The value of vRtrIfIcmpV6NumRedirects limits the number of v6 redirects issued per the time frame specified in vRtrIfIcmpV6RedirectsTime.
U32 vRtrIfIcmpV6NumTimeExceeded	1.3.6.1.4.1.7483.6.1.2.3.4.1.50	Unsigned32	read-create	The value of vRtrIfIcmpV6NumTimeExceeded specifies how many time-exceeded ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6TimeExceededTime.
U32 vRtrIfIcmpV6NumUnreachables	1.3.6.1.4.1.7483.6.1.2.3.4.1.47	Unsigned32	read-create	The value of vRtrIfIcmpV6NumUnreachables determines how many destination unreachable ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6UnreachablesTime.
T/F vRtrIfIcmpV6ParamProblem	1.3.6.1.4.1.7483.6.1.2.3.4.1.55	TruthValue	read-create	The value of vRtrIfIcmpV6ParamProblem specifies whether parameter-problem ICMP messages should be sent. When it is set to 'true', ICMPv6 parameter-problem messages are generated by this interface. When vRtrIfIcmpV6ParamProblem is set to 'false', ICMPv6 parameter-problem messages are not sent.
U32 vRtrIfIcmpV6ParamProblemTime	1.3.6.1.4.1.7483.6.1.2.3.4.1.57	Unsigned32	read-create	The value of vRtrIfIcmpV6ParamProblemTime specifies the time frame in seconds that is used to limit the number of parameter-problem ICMPv6 messages issued per time frame.
T/F vRtrIfIcmpV6PktTooBig	1.3.6.1.4.1.7483.6.1.2.3.4.1.52	TruthValue	read-create	The value of vRtrIfIcmpV6PktTooBig specifies whether packet-too-big ICMP messages should be sent. When it is set to 'true', ICMPv6 packet-too-big messages are generated by this interface. When vRtrIfIcmpV6PktTooBig is set to 'false', ICMPv6 packet-too-big messages are not sent.
U32 vRtrIfIcmpV6PktTooBigTime	1.3.6.1.4.1.7483.6.1.2.3.4.1.54	Unsigned32	read-create	The value of vRtrIfIcmpV6PktTooBigTime specifies the time frame in seconds that is used to limit the number of packet-too-big ICMPv6 messages issued per time frame.
T/F vRtrIfIcmpV6Redirects	1.3.6.1.4.1.7483.6.1.2.3.4.1.43	TruthValue	read-create	When vRtrIfIcmpV6Redirects is set to 'true', ICMPv6 redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpV6Redirects is set to 'false', ICMPv6 redirects are not generated.
U32 vRtrIfIcmpV6RedirectsTime	1.3.6.1.4.1.7483.6.1.2.3.4.1.45	Unsigned32	read-create	The value of vRtrIfIcmpV6RedirectsTime determines the time frame in seconds that is used to limit the number of v6 redirects issued per time frame.
T/F vRtrIfIcmpV6TimeExceeded	1.3.6.1.4.1.7483.6.1.2.3.4.1.49	TruthValue	read-create	The value of vRtrIfIcmpV6TimeExceeded specifies whether time-exceeded ICMP messages should be sent. When it is set to 'true', ICMPv6 time-exceeded messages are generated by this interface. When vRtrIfIcmpV6TimeExceeded is set to 'false', ICMPv6 time-exceeded messages are not sent.
U32 vRtrIfIcmpV6TimeExceededTime	1.3.6.1.4.1.7483.6.1.2.3.4.1.51	Unsigned32	read-create	The value of vRtrIfIcmpV6TimeExceededTime specifies the time frame in seconds that is used to limit the number of time-exceeded ICMPv6 messages issued per time frame.
T/F vRtrIfIcmpV6Unreachables	1.3.6.1.4.1.7483.6.1.2.3.4.1.46	TruthValue	read-create	When vRtrIfIcmpV6Unreachables is set to 'true', ICMPv6 host and network unreachable messages are generated by this interface. When vRtrIfIcmpV6Unreachables is set to 'false', ICMPv6 host and network unreachable messages are not sent.
U32 vRtrIfIcmpV6UnreachablesTime	1.3.6.1.4.1.7483.6.1.2.3.4.1.48	Unsigned32	read-create	The value of vRtrIfIcmpV6UnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable ICMPv6 messages issued per time frame.
NUM vRtrIfIndex	1.3.6.1.4.1.7483.6.1.2.3.4.1.1	InterfaceIndex	accessible-for-notify	The unique value which identifies this interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next.
OCT vRtrIfInfo	1.3.6.1.4.1.7483.6.1.2.3.61.1.3	OCTET STRING	read-create	The value of vRtrIfInfo specifies the information used to authenticate the interface.
T/F vRtrIfInfoEncrypted	1.3.6.1.4.1.7483.6.1.2.3.61.1.4	TruthValue	read-create	The object vRtrIfInfoEncrypted is currently not supported.
TIP vRtrIfIngressFilterId	1.3.6.1.4.1.7483.6.1.2.3.4.1.27	TIPFilterID	read-create	The value of vRtrIfIngressFilterId associates an ip-filter-id with an ingress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
T/F vRtrIfIngressIpv4Flowspec	1.3.6.1.4.1.7483.6.1.2.3.61.1.2	TruthValue	read-create	The value of vRtrIfIngressIpv4Flowspec specifies whether ingress Flowspec for IPv4 is enabled for this interface.
T/F vRtrIfInitDelayEnable	1.3.6.1.4.1.7483.6.1.2.3.4.1.67	TruthValue	read-create	The value of vRtrIfInitDelayEnable specifies whether vRtrIfDelaySeconds is used only the next time or everytime the system attempts to bring the interface operationally up. The value of vRtrIfInitDelayEnable is ignored if the value of vRtrIfDelaySeconds is set to 0. The value of vRtrIfInitDelayEnable is only set when interface is of type subscriber-interface. When the value vRtrIfInitDelayEnable is set to 'false', everytime the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds. When the value vRtrIfInitDelayEnable is set to 'true', only the next time the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds.
C64 vRtrIfIpReasBytesRx	1.3.6.1.4.1.7483.6.1.2.3.54.1.31	Counter64	read-only	The value of vRtrIfIpReasBytesRx indicates the number of total bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasBytesRxHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.33	Counter32	read-only	The value of vRtrIfIpReasBytesRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasBytesRx.
C32 vRtrIfIpReasBytesRxLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.32	Counter32	read-only	The value of vRtrIfIpReasBytesRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasBytesRx.
C64 vRtrIfIpReasBytesTx	1.3.6.1.4.1.7483.6.1.2.3.54.1.37	Counter64	read-only	The value of vRtrIfIpReasBytesTx indicates the number of total bytes sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasBytesTxHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.39	Counter32	read-only	The value of vRtrIfIpReasBytesTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasBytesTx.
C32 vRtrIfIpReasBytesTxLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.38	Counter32	read-only	The value of vRtrIfIpReasBytesTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasBytesTx.
C64 vRtrIfIpReasFragBytesRcvd	1.3.6.1.4.1.7483.6.1.2.3.54.1.10	Counter64	read-only	The value of vRtrIfIpReasFragBytesRcvd indicates the number of fragmented bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasFragBytesRcvdHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.12	Counter32	read-only	The value of vRtrIfIpReasFragBytesRcvdHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragBytesRcvd.
C32 vRtrIfIpReasFragBytesRcvdLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.11	Counter32	read-only	The value of vRtrIfIpReasFragBytesRcvdLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragBytesRcvd.
C64 vRtrIfIpReasFragBytesReas	1.3.6.1.4.1.7483.6.1.2.3.54.1.16	Counter64	read-only	The value of vRtrIfIpReasFragBytesReas indicates the number of fragmented bytes reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasFragBytesReasHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.18	Counter32	read-only	The value of vRtrIfIpReasFragBytesReasHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragBytesReas.
C32 vRtrIfIpReasFragBytesReasLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.17	Counter32	read-only	The value of vRtrIfIpReasFragBytesReasLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragBytesReas.
C64 vRtrIfIpReasFragDisc	1.3.6.1.4.1.7483.6.1.2.3.54.1.22	Counter64	read-only	The value of vRtrIfIpReasFragDisc indicates the number of packets reassembly discarded due to the timeout on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasFragDiscHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.24	Counter32	read-only	The value of vRtrIfIpReasFragDiscHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragDisc.
C32 vRtrIfIpReasFragDiscLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.23	Counter32	read-only	The value of vRtrIfIpReasFragDiscLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragDisc.
C64 vRtrIfIpReasFragPktsRcvd	1.3.6.1.4.1.7483.6.1.2.3.54.1.7	Counter64	read-only	The value of vRtrIfIpReasFragPktsRcvd indicates the number of fragmented packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasFragPktsRcvdHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.9	Counter32	read-only	The value of vRtrIfIpReasFragPktsRcvdHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragPktsRcvd.
C32 vRtrIfIpReasFragPktsRcvdLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.8	Counter32	read-only	The value of vRtrIfIpReasFragPktsRcvdLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragPktsRcvd.
C64 vRtrIfIpReasFragPktsReas	1.3.6.1.4.1.7483.6.1.2.3.54.1.13	Counter64	read-only	The value of vRtrIfIpReasFragPktsReas indicates the number of fragmented packets reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasFragPktsReasHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.15	Counter32	read-only	The value of vRtrIfIpReasFragPktsReasHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragPktsRcvd.
C32 vRtrIfIpReasFragPktsReasLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.14	Counter32	read-only	The value of vRtrIfIpReasFragPktsReasLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragPktsReas.
C64 vRtrIfIpReasFragReasErrors	1.3.6.1.4.1.7483.6.1.2.3.54.1.19	Counter64	read-only	The value of vRtrIfIpReasFragReasErrors indicates the number of reassembly errors occured on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasFragReasErrorsHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.21	Counter32	read-only	The value of vRtrIfIpReasFragReasErrorsHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragReasErrors.
C32 vRtrIfIpReasFragReasErrorsLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.20	Counter32	read-only	The value of vRtrIfIpReasFragReasErrorsLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragReasErrors.
C64 vRtrIfIpReasOutBufRes	1.3.6.1.4.1.7483.6.1.2.3.54.1.25	Counter64	read-only	The value of vRtrIfIpReasOutBufRes indicates the number of times out of buffer resources happend while reassembly on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasOutBufResHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.27	Counter32	read-only	The value of vRtrIfIpReasOutBufResHigh32 indicates the high 32 bits of the value of vRtrIfIpReasOutBufRes.
C32 vRtrIfIpReasOutBufResLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.26	Counter32	read-only	The value of vRtrIfIpReasOutBufResLow32 indicates the lower 32 bits of the value of vRtrIfIpReasOutBufRes.
C64 vRtrIfIpReasPktsRx	1.3.6.1.4.1.7483.6.1.2.3.54.1.28	Counter64	read-only	The value of vRtrIfIpReasPktsRx indicates the number of total packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasPktsRxHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.30	Counter32	read-only	The value of vRtrIfIpReasPktsRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasPktsRx.
C32 vRtrIfIpReasPktsRxLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.29	Counter32	read-only	The value of vRtrIfIpReasPktsRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasPktsRx.
C64 vRtrIfIpReasPktsTx	1.3.6.1.4.1.7483.6.1.2.3.54.1.34	Counter64	read-only	The value of vRtrIfIpReasPktsTx indicates the number of total packets sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasPktsTxHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.36	Counter32	read-only	The value of vRtrIfIpReasPktsTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasPktsTx.
C32 vRtrIfIpReasPktsTxLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.35	Counter32	read-only	The value of vRtrIfIpReasPktsTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasPktsTx.
C64 vRtrIfIpReasV6BytesRx	1.3.6.1.4.1.7483.6.1.2.3.54.1.94	Counter64	read-only	The value of vRtrIfIpReasV6BytesRx indicates the number of total IPv6 bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6BytesRxHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.96	Counter32	read-only	The value of vRtrIfIpReasV6BytesRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6BytesRx.
C32 vRtrIfIpReasV6BytesRxLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.95	Counter32	read-only	The value of vRtrIfIpReasV6BytesRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6BytesRx.
C64 vRtrIfIpReasV6BytesTx	1.3.6.1.4.1.7483.6.1.2.3.54.1.100	Counter64	read-only	The value of vRtrIfIpReasV6BytesTx indicates the number of total IPv6 bytes sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6BytesTxHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.102	Counter32	read-only	The value of vRtrIfIpReasV6BytesTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6BytesTx.
C32 vRtrIfIpReasV6BytesTxLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.101	Counter32	read-only	The value of vRtrIfIpReasV6BytesTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6BytesTx.
C64 vRtrIfIpReasV6FragBytesRcvd	1.3.6.1.4.1.7483.6.1.2.3.54.1.73	Counter64	read-only	The value of vRtrIfIpReasV6FragBytesRcvd indicates the number of IPv6 fragmented bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6FragBytesRcvdH32	1.3.6.1.4.1.7483.6.1.2.3.54.1.75	Counter32	read-only	The value of vRtrIfIpReasV6FragBytesRcvdH32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragBytesRcvd.
C32 vRtrIfIpReasV6FragBytesRcvdL32	1.3.6.1.4.1.7483.6.1.2.3.54.1.74	Counter32	read-only	The value of vRtrIfIpReasV6FragBytesRcvdL32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragBytesRcvd.
C64 vRtrIfIpReasV6FragBytesReas	1.3.6.1.4.1.7483.6.1.2.3.54.1.79	Counter64	read-only	The value of vRtrIfIpReasV6FragBytesReas indicates the number of IPv6 fragmented bytes reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6FragBytesReasH32	1.3.6.1.4.1.7483.6.1.2.3.54.1.81	Counter32	read-only	The value of vRtrIfIpReasV6FragBytesReasH32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragBytesReas.
C32 vRtrIfIpReasV6FragBytesReasL32	1.3.6.1.4.1.7483.6.1.2.3.54.1.80	Counter32	read-only	The value of vRtrIfIpReasV6FragBytesReasL32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragBytesReas.
C64 vRtrIfIpReasV6FragDisc	1.3.6.1.4.1.7483.6.1.2.3.54.1.85	Counter64	read-only	The value of vRtrIfIpReasV6FragDisc indicates the number of IPv6 packets reassembly discarded due to the timeout on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6FragDiscHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.87	Counter32	read-only	The value of vRtrIfIpReasV6FragDiscHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragDisc.
C32 vRtrIfIpReasV6FragDiscLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.86	Counter32	read-only	The value of vRtrIfIpReasV6FragDiscLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragDisc.
C64 vRtrIfIpReasV6FragPktsRcvd	1.3.6.1.4.1.7483.6.1.2.3.54.1.70	Counter64	read-only	The value of vRtrIfIpReasV6FragPktsRcvd indicates the number of IPv6 fragmented packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6FragPktsRcvdHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.72	Counter32	read-only	The value of vRtrIfIpReasV6FragPktsRcvdHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragPktsRcvd.
C32 vRtrIfIpReasV6FragPktsRcvdLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.71	Counter32	read-only	The value of vRtrIfIpReasV6FragPktsRcvdLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragPktsRcvd.
C64 vRtrIfIpReasV6FragPktsReas	1.3.6.1.4.1.7483.6.1.2.3.54.1.76	Counter64	read-only	The value of vRtrIfIpReasV6FragPktsReas indicates the number of IPv6 fragmented packets reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6FragPktsReasHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.78	Counter32	read-only	The value of vRtrIfIpReasV6FragPktsReasHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragPktsRcvd.
C32 vRtrIfIpReasV6FragPktsReasLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.77	Counter32	read-only	The value of vRtrIfIpReasV6FragPktsReasLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragPktsReas.
C64 vRtrIfIpReasV6FragReasErrors	1.3.6.1.4.1.7483.6.1.2.3.54.1.82	Counter64	read-only	The value of vRtrIfIpReasV6FragReasErrors indicates the number of IPv6 reassembly errors occured on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6FragReasErrorsH32	1.3.6.1.4.1.7483.6.1.2.3.54.1.84	Counter32	read-only	The value of vRtrIfIpReasV6FragReasErrorsH32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragReasErrors.
C32 vRtrIfIpReasV6FragReasErrorsL32	1.3.6.1.4.1.7483.6.1.2.3.54.1.83	Counter32	read-only	The value of vRtrIfIpReasV6FragReasErrorsL32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragReasErrors.
C64 vRtrIfIpReasV6OutBufRes	1.3.6.1.4.1.7483.6.1.2.3.54.1.88	Counter64	read-only	The value of vRtrIfIpReasV6OutBufRes indicates the number of times out of buffer resources happend while IPv6 reassembly on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6OutBufResHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.90	Counter32	read-only	The value of vRtrIfIpReasV6OutBufResHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6OutBufRes.
C32 vRtrIfIpReasV6OutBufResLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.89	Counter32	read-only	The value of vRtrIfIpReasV6OutBufResLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6OutBufRes.
C64 vRtrIfIpReasV6PktsRx	1.3.6.1.4.1.7483.6.1.2.3.54.1.91	Counter64	read-only	The value of vRtrIfIpReasV6PktsRx indicates the number of total IPv6 packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6PktsRxHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.93	Counter32	read-only	The value of vRtrIfIpReasV6PktsRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6PktsRx.
C32 vRtrIfIpReasV6PktsRxLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.92	Counter32	read-only	The value of vRtrIfIpReasV6PktsRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6PktsRx.
C64 vRtrIfIpReasV6PktsTx	1.3.6.1.4.1.7483.6.1.2.3.54.1.97	Counter64	read-only	The value of vRtrIfIpReasV6PktsTx indicates the number of total IPv6 packets sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'.
C32 vRtrIfIpReasV6PktsTxHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.99	Counter32	read-only	The value of vRtrIfIpReasV6PktsTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6PktsTx.
C32 vRtrIfIpReasV6PktsTxLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.98	Counter32	read-only	The value of vRtrIfIpReasV6PktsTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6PktsTx.
T/F vRtrIfIPv6ConfigAllowed	1.3.6.1.4.1.7483.6.1.2.3.4.1.39	TruthValue	read-create	The value of vRtrIfIPv6ConfigAllowed specifies whether IPv6 can be configured on this router interface. When the value is 'true', IPv6 can be configured on this interface. When it is 'false', IPv6 cannot be configured. Object iesIfIPv6ConfigAllowed should be set if vRtrIfType is 'subscriber' or 'group'.
TIP vRtrIfIPv6EgressFilterId	1.3.6.1.4.1.7483.6.1.2.3.4.1.42	TIPFilterID	read-create	The value of vRtrIfIPv6EgressFilterId associates an ip-filter-id with an egress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TIP vRtrIfIPv6IngressFilterId	1.3.6.1.4.1.7483.6.1.2.3.4.1.41	TIPFilterID	read-create	The value of vRtrIfIPv6IngressFilterId associates an ip-filter-id with an ingress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TMN vRtrIfIPv6OperState	1.3.6.1.4.1.7483.6.1.2.3.4.1.40	TmnxOperState	read-only	The current operational status for IPv6 on this router interface.
INT vRtrIfIpv6QosRouteLookup	1.3.6.1.4.1.7483.6.1.2.3.61.1.6	INTEGER	read-create	The value of vRtrIfIpv6QosRouteLookup specifies whether QoS classification of the ingress IP packets based on the route lookup is enabled for ipv6 on this router interface. By default the value of vRtrIfIpv6QosRouteLookup is 'none (0)', which means the Qos classification of incoming IP packets based on the route lookup is disabled on this interface. When the value of vRtrIfIpv6QosRouteLookup is 'destination (1)', the QoS route lookup is enabled and the Qos classification of incoming IP packets is based on the destination address matching.
INT vRtrIfIpv6uRPFCheckMode	1.3.6.1.4.1.7483.6.1.2.3.61.1.9	INTEGER	read-create	The value of vRtrIfIpv6uRPFCheckMode specifies the mode of unicast RPF check. By default the value of vRtrIfIpv6uRPFCheckMode is 'strict (0)',which means that uRPF checks whether the incoming packet has a source address that matches a prefix in the routing table, and whether the interface expects to recieve a packet with this source address prefix. When the value of vRtrIfIpv6uRPFCheckMode is 'loose (1)', the uRPF checks whether the incoming packet has a source address with a corresponding prefix in the routing table. It does not check whether the interface expects to recieve a packet with a specific source address prefix. This object is valid only when value of vRtrIfIpv6uRPFCheckState is set to 'enabled'.
TMN vRtrIfIpv6uRPFCheckState	1.3.6.1.4.1.7483.6.1.2.3.61.1.8	TmnxEnabledDisabled	read-create	The value of vRtrIfIpv6uRPFCheckState specifies whether unicast RPF (uRPF) check is enabled on this interface.
TIM vRtrIfLastOperStateChange	1.3.6.1.4.1.7483.6.1.2.3.4.1.61	TimeStamp	read-only	The value of vRtrIfLastOperStateChange indicates the sysUpTime when the operational state of this interface last changed.
U32 vRtrIfLdpSyncTimer	1.3.6.1.4.1.7483.6.1.2.3.4.1.70	Unsigned32	read-create	The value of vRtrIfLdpSyncTimer specifies a time interval used for IGP-LDP synchronization. The timer is started from the time the LDP session to the neighbor is up over the interface. This is to allow for the label FEC bindings to be exchanged. When the timer expires, the link cost is restored and is re-advertised. IGP will announce a new best next-hop and LDP will use it if the label binding for the neighbor's FEC is available.
IP vRtrIfLinkLocalAddress	1.3.6.1.4.1.7483.6.1.2.3.4.1.59	InetAddress	read-only	The value of vRtrIfLinkLocalAddress indicates the link local IP address of this virtual router interface. This address valid when the value of vRtrIfIPv6OperState is 'inService'.
TMN vRtrIfLinkLocalAddressState	1.3.6.1.4.1.7483.6.1.2.3.4.1.60	TmnxInetAddrState	read-only	The value of vRtrIfLinkLocalAddressState indicates the address state of vRtrIfLinkLocalAddress. When vRtrIfIPv6OperState is 'outOfService', the value of this object is 'unknown'.
IPt vRtrIfLinkLocalAddressType	1.3.6.1.4.1.7483.6.1.2.3.4.1.58	InetAddressType	read-only	The value of vRtrIfLinkLocalAddressType indicates the IP address type of the link local address of this virtual router interface. When the value of vRtrIfIPv6OperState is 'inService', this object will have a value of 'ipv6z', and 'unknown' otherwise.
TNA vRtrIfLocalDhcpServerName	1.3.6.1.4.1.7483.6.1.2.3.4.1.66	TNamedItemOrEmpty	read-create	The value of vRtrIfLocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TN-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router.
INT vRtrIfLsrIpLoadBalancing	1.3.6.1.4.1.7483.6.1.2.3.61.1.1	INTEGER	read-create	The value of vRtrIfLsrIpLoadBalancing specifies whether the IP Header is used in the LAG and ECMP LSR hashing algorithm. This is the per interface setting. When set to 'label-only (1)' only the label is used in the hashing algorithm. When set to 'label-ip (2)', the IP Header is included in the hashing algorithm. When set to 'ip-only (3)' the IP Header is used exclusively in the hashing Algorithm. When set to 'system (0)', the hashing algorithm is inherited from the object tmnxLsrIpLoadBalancing.
TMN vRtrIfMplsStatus	1.3.6.1.4.1.7483.6.1.2.3.4.1.30	TmnxStatus	read-create	Setting this variable to 'create' causes this interface to be used with MPLS. It also causes a row to be created in the vRtrMplsIfTable. Setting it to 'delete' removes the interface from MPLS and causes the corresponding row in the vRtrMplsIfTable to be removed. However, an attempt to set vRtrIfMplsStatus to 'delete' will fail if MPLS activity on this interface is not administratively in the outOfService state, i.e. vRtrMplsIfAdminState of the vRtrMplsIfTable must be set to 'outOfService'.
U32 vRtrIfMtu	1.3.6.1.4.1.7483.6.1.2.3.4.1.25	Unsigned32	read-create	The value of vRtrIfMtu is used to reflect the MTU size of this interface in the header of an ICMP MTU exceeded message when a packet is too large to be transmitted on this interface. The default size is calculated by subtracting the DLC header size from the physical MTU size of the interface. When a SNMP SET request is received with a value of zero (0), the agent actually sets vRtrIfMtu to the calculated default size.
TNA vRtrIfName	1.3.6.1.4.1.7483.6.1.2.3.4.1.4	TNamedItem	read-create	The administrative name assigned this router interface. The interface name must be unique among entries with the same vRtrID value. In order for row creation to succeed, a value must also be assigned to vRtrIfName.
vRtrIfNameEntry	1.3.6.1.4.1.7483.6.1.2.3.5.1		not-accessible	Each row entry in the vRtrIfNameTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table.
NUM vRtrIfNameIndex	1.3.6.1.4.1.7483.6.1.2.3.5.1.1	InterfaceIndex	read-only	The value of vRtrIfNameIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface which has interface name as vRtrIfName. Every vRtrIfName is unique within a specific instance of vRtrID.
vRtrIfNameTable	1.3.6.1.4.1.7483.6.1.2.3.5		not-accessible	This is a read-only table, each row of which represents a one to one equivalence between a router interface name (vRtrIfName) and its corresponding index in the vRtrIfTable (vRtrIfIndex).
T/F vRtrIfNtpBroadcast	1.3.6.1.4.1.7483.6.1.2.3.4.1.23	TruthValue	read-create	When vRtrIfNtpBroadcast is set to 'true', NTP/SNTP broadcasts will be received on this interface.
BIT vRtrIfOperDownReason	1.3.6.1.4.1.7483.6.1.2.3.4.1.78	Bits	read-only	The value of vRtrIfOperDownReason specifies the reason why the interface is operationally down. The bit values are: 'ifAdminDown (0)' - Interface is administratively down 'svcAdminDown (1)' - Service is administratively down 'portOperDown (2)' - SAP port is operationally down 'addrOrIfNotReady (3)' - Address or Parent interface is not ready 'assocObjNotReady (4)' - Associated object is not ready 'rvplsDown (5)' - R-VPLS service is down 'operGrpDown (6)' - Associated Operational Group is down 'ifAdminDestroy (7)' - Interface is being deleted 'noIfAddress (8)' - Interface address is not configured 'noIfInfo (9)' - Interface info not present 'delayedStartEnabled (10)' - Delayed start timer is enabled on the interface 'ifProtoOperDown (11)' - Protocols on interface are operationally down 'invalidPortCfg (12)' - Port configuration is not valid 'unknown (13)' - Reason is unknown 'ipv6Misconfig (14)' - Ipv6 misconfiguration.
U32 vRtrIfOperMtu	1.3.6.1.4.1.7483.6.1.2.3.4.1.62	Unsigned32	read-only	The value of vRtrIfOperMtu indicates the operational value of the IP MTU on this interface. It is the minimum of the vRtrIfMtu and the MTU of the physical port this interface is bound to.
TMN vRtrIfOperState	1.3.6.1.4.1.7483.6.1.2.3.4.1.9	TmnxOperState	read-only	The current operational status of this router interface.
MAC vRtrIfPhysicalAddress	1.3.6.1.4.1.7483.6.1.2.3.4.1.11	MacAddress	read-create	The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
NUM vRtrIfPortID	1.3.6.1.4.1.7483.6.1.2.3.4.1.5	InterfaceIndexOrZero	read-create	The physical port to which this interface is bound. If vRtrIfPortID is zero (0), then there is no binding between this virtual router interface and a physical port. Once an interface has been bound to a port, several steps are required to change the binding to some other TmnxPortID value. vRtrIfAdminState must be 'outOfService'; vRtrIfPortID must be set to zero (0) to disassociate the interface from the original port binding; finally, set vRtrIfPortID to the value for the new port binding. Setting vRtrIfPortID to 0x20000001 indicates that this interface is the system interface for the device.
BIT vRtrIfProtocol	1.3.6.1.4.1.7483.6.1.2.3.4.1.35	Bits	read-only	The value of vRtrIfProtocol indicates which protocols are running on this virtual router interface. If the bit corresponding to a protocol is set, then the protocol is enabled on this interface.
vRtrIfQosEntry	1.3.6.1.4.1.7483.6.1.2.3.78.1		not-accessible	Each row entry represents a virtual router interface QoS management objects in the system. Entries can be created and deleted via SNMP SET operations along with the associated row entry in vRtrIfTable using the vRtrIfRowStatus variable.
TNE vRtrIfQosNetworkPolicyId	1.3.6.1.4.1.7483.6.1.2.3.78.1.1	TNetworkPolicyID	read-create	The value of vRtrIfQosNetworkPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface.
TNE vRtrIfQosPolicyId	1.3.6.1.4.1.7483.6.1.2.3.4.1.26	TNetworkPolicyID	read-create	The value of vRtrIfQosPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface. This object is obsoleted in release 10.0 and replaced with object vRtrIfQosNetworkPolicyId.
TNA vRtrIfQosQGrp	1.3.6.1.4.1.7483.6.1.2.3.4.1.74	TNamedItemOrEmpty	read-create	The value of vRtrIfQosQGrp specifies the name of the QoS queue-group (TN-QOS-MIB::tQosEgrQGroupName) used with this interface. An 'inconsistentValue' error is returned if this object is set to a non-default value and an entry corresponding to vRtrIfPortID does not exist in TN-PORT-MIB::tPortNetEgrQGrpTable. This object is obsoleted in release 10.0 and replaced with object vRtrIfQosEgrPortRedirectQGrp.
INT vRtrIfQosRouteLookup	1.3.6.1.4.1.7483.6.1.2.3.61.1.5	INTEGER	read-create	The value of vRtrIfQosRouteLookup specifies whether QoS classification of the ingress IP packets based on the route lookup is enabled for ipv4 on this router interface. By default the value of vRtrIfQosRouteLookup is set to 'none (0)', which means the Qos classification of incoming IP packets based on the route lookup is disabled for ipv4 on this interface. When the value of vRtrIfQosRouteLookup is 'destination (1)', the QoS route lookup is enabled and the Qos classification of incoming IP packets is based on the destination address matching. When the value of vRtrIfQosRouteLookup is 'source (2)', the QoS route lookup is enabled and the Qos classification of incoming IP packets is based on the source address matching.
vRtrIfQosTable	1.3.6.1.4.1.7483.6.1.2.3.78		not-accessible	The vRtrIfQosTable has an entry for each router interface configured in the system. This table contains objects managing QoS on the interface. This table augments the vRtrIfTable.
ROW vRtrIfRowStatus	1.3.6.1.4.1.7483.6.1.2.3.4.1.2	RowStatus	read-create	The row status. The creation or deletion of a router interface entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID and vRtrIfIndex values, such as the vRtrIpAddrTable. The router interface is associated to a physical port interface through the vRtrIfPortID and vRtrIfEncapValue variables. The RowStatus cannot be SET to 'active' unless vRtrIfName has been initialized.
C64 vRtrIfRxBytes	1.3.6.1.4.1.7483.6.1.2.3.54.1.43	Counter64	read-only	The value of vRtrIfRxBytes indicates the number of total bytes received by this interface.
C32 vRtrIfRxBytesHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.45	Counter32	read-only	The value of vRtrIfRxBytesHigh32 indicates the high 32 bits of the value of vRtrIfRxBytes.
C32 vRtrIfRxBytesLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.44	Counter32	read-only	The value of vRtrIfRxBytesLow32 indicates the lower 32 bits of the value of vRtrIfRxBytes.
C64 vRtrIfRxPkts	1.3.6.1.4.1.7483.6.1.2.3.54.1.40	Counter64	read-only	The value of vRtrIfRxPkts indicates the number of total packets received by this interface.
C32 vRtrIfRxPktsHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.42	Counter32	read-only	The value of vRtrIfRxPktsHigh32 indicates the high 32 bits of the value of vRtrIfRxPkts.
C32 vRtrIfRxPktsLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.41	Counter32	read-only	The value of vRtrIfRxPktsLow32 indicates the lower 32 bits of the value of vRtrIfRxPkts.
TMN vRtrIfServiceId	1.3.6.1.4.1.7483.6.1.2.3.4.1.37	TmnxServId	read-create	The value of vRtrIfServiceId specifies the service id for this interface. This object must always be set at row creation when the vRtrIfType is not network(1). This object cannot be modified once the row is created.
C64 vRtrIfSpeed	1.3.6.1.4.1.7483.6.1.2.3.54.1.103	Counter64	read-only	The value of vRtrIfSpeed indicates an estimate of the current bandwidth in bits per second for this interface.
vRtrIfStatsEntry	1.3.6.1.4.1.7483.6.1.2.3.54.1		not-accessible	Each row entry represents the statistics per virtual router interface. Entries are created and deleted when entries in the vRtrIfEntry are created and deleted.
vRtrIfStatsExtEntry	1.3.6.1.4.1.7483.6.1.2.3.74.1		not-accessible	Each row entry represents the statistics per virtual router interface. Entries are created and deleted when entries in the vRtrIfEntry are created and deleted.
vRtrIfStatsExtTable	1.3.6.1.4.1.7483.6.1.2.3.74		not-accessible	The vRtrIfStatsExtTable table contains statistics per virtual router interface.
vRtrIfStatsTable	1.3.6.1.4.1.7483.6.1.2.3.54		not-accessible	The vRtrIfStatsTable table contains statistics per virtual router interface.
STR vRtrIfStatusString	1.3.6.1.4.1.7483.6.1.2.3.61.1.7	DisplayString	read-only	The value of vRtrIfStatusString indicates the status information about the interface.
T/F vRtrIfStripLabel	1.3.6.1.4.1.7483.6.1.2.3.4.1.71	TruthValue	read-create	The value of vRtrIfStripLabel specifies whether a packet received on the interface will have it's MPLS labels stripped from the packet (true) or not (false).
vRtrIfTable	1.3.6.1.4.1.7483.6.1.2.3.4		not-accessible	The vRtrIfTable has an entry for each router interface configured in the system.
TMN vRtrIfTmsMgmtVprn	1.3.6.1.4.1.7483.6.1.2.3.61.1.11	TmnxServId	read-create	The vRtrIfTmsMgmtVprn specifies the management VPRN service associated with this threat-management service (TMS) interface. An 'inconsistentValue' error is returned when this object is set to a non-default value when vRtrIfType is not set to 'tmsService'. An 'inconsistentValue' error is returned when this object is set to a different value when vRtrIfRowStatus is set to 'active'.
TMN vRtrIfTmsOffRampVprn	1.3.6.1.4.1.7483.6.1.2.3.61.1.10	TmnxServId	read-create	The vRtrIfTmsOffRampVprn specifies the off-ramp VPRN service associated with this threat-management service (TMS) interface. An 'inconsistentValue' error is returned when this object is set to a non-default value when vRtrIfType is not set to 'tmsService'. An 'inconsistentValue' error is returned when this object is set to a different value when vRtrIfRowStatus is set to 'active'.
T/F vRtrIfTosMarkingTrusted	1.3.6.1.4.1.7483.6.1.2.3.4.1.36	TruthValue	read-create	The value of vRtrIfTosMarkingTrusted specifies whether the TOS bits on the packets ingressing on the interface should be trusted by the system or not. If the value is set to 'true', the TOS bits should be trusted. If the system does not trust these packets, it will remark the packets upon egress as indicated by the value of the egress remark flag, TN-QOS-MIB:: tNetworkPolicyEgressRemark. The egress remark flag is part of the QoS policy applied to the network interface. The interfaces belonging to the IES service have the egress remark flag set to not trusted, 'false', by default. For all other interface types, the TOS bits are trusted by default.
INT vRtrIfTotalNumber	1.3.6.1.4.1.7483.6.1.2.3.3	INTEGER	read-only	The number of router interfaces configured in this system.
C64 vRtrIfTxBytes	1.3.6.1.4.1.7483.6.1.2.3.74.1.4	Counter64	read-only	The value of vRtrIfTxBytes indicates the number of total bytes sent by this interface.
C32 vRtrIfTxBytesHigh32	1.3.6.1.4.1.7483.6.1.2.3.74.1.6	Counter32	read-only	The value of vRtrIfTxBytesHigh32 indicates the high 32 bits of the value of vRtrIfTxBytes.
C32 vRtrIfTxBytesLow32	1.3.6.1.4.1.7483.6.1.2.3.74.1.5	Counter32	read-only	The value of vRtrIfTxBytesLow32 indicates the lower 32 bits of the value of vRtrIfTxBytes.
C64 vRtrIfTxPkts	1.3.6.1.4.1.7483.6.1.2.3.74.1.1	Counter64	read-only	The value of vRtrIfTxPkts indicates the number of total packets sent by this interface.
C32 vRtrIfTxPktsHigh32	1.3.6.1.4.1.7483.6.1.2.3.74.1.3	Counter32	read-only	The value of vRtrIfTxPktsHigh32 indicates the high 32 bits of the value of vRtrIfTxPkts.
C32 vRtrIfTxPktsLow32	1.3.6.1.4.1.7483.6.1.2.3.74.1.2	Counter32	read-only	The value of vRtrIfTxPktsLow32 indicates the lower 32 bits of the value of vRtrIfTxPkts.
C64 vRtrIfTxV4Bytes	1.3.6.1.4.1.7483.6.1.2.3.54.1.49	Counter64	read-only	The value of vRtrIfTxV4Bytes indicates the number of total IPv4 bytes sent from this interface.
C32 vRtrIfTxV4BytesHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.51	Counter32	read-only	The value of vRtrIfTxV4BytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV4Bytes.
C32 vRtrIfTxV4BytesLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.50	Counter32	read-only	The value of vRtrIfTxV4BytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV4Bytes.
C64 vRtrIfTxV4DiscardBytes	1.3.6.1.4.1.7483.6.1.2.3.54.1.61	Counter64	read-only	The value of vRtrIfTxV4DiscardBytes indicates the number of total IPv4 transmit bytes discarded by this interface.
C32 vRtrIfTxV4DiscardBytesHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.63	Counter32	read-only	The value of vRtrIfTxV4DiscardBytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV4DiscardBytes.
C32 vRtrIfTxV4DiscardBytesLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.62	Counter32	read-only	The value of vRtrIfTxV4DiscardBytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV4DiscardBytes.
C64 vRtrIfTxV4DiscardPkts	1.3.6.1.4.1.7483.6.1.2.3.54.1.58	Counter64	read-only	The value of vRtrIfTxV4DiscardPkts indicates the number of total IPv4 transmit packets discarded by this interface.
C32 vRtrIfTxV4DiscardPktsHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.60	Counter32	read-only	The value of vRtrIfTxV4DiscardPktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV4DiscardPkts.
C32 vRtrIfTxV4DiscardPktsLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.59	Counter32	read-only	The value of vRtrIfTxV4DiscardPktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV4DiscardPkts.
C64 vRtrIfTxV4Pkts	1.3.6.1.4.1.7483.6.1.2.3.54.1.46	Counter64	read-only	The value of vRtrIfTxV4Pkts indicates the number of total IPv4 packets sent from this interface.
C32 vRtrIfTxV4PktsHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.48	Counter32	read-only	The value of vRtrIfTxV4PktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV4Pkts.
C32 vRtrIfTxV4PktsLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.47	Counter32	read-only	The value of vRtrIfTxV4PktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV4Pkts.
C64 vRtrIfTxV6Bytes	1.3.6.1.4.1.7483.6.1.2.3.54.1.55	Counter64	read-only	The value of vRtrIfTxV6Bytes indicates the number of total IPv6 bytes sent from this interface.
C32 vRtrIfTxV6BytesHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.57	Counter32	read-only	The value of vRtrIfTxV6BytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV6Bytes.
C32 vRtrIfTxV6BytesLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.56	Counter32	read-only	The value of vRtrIfTxV6BytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV6Bytes.
C64 vRtrIfTxV6DiscardBytes	1.3.6.1.4.1.7483.6.1.2.3.54.1.67	Counter64	read-only	The value of vRtrIfTxV6DiscardBytes indicates the number of total IPv6 transmit bytes discarded by this interface.
C32 vRtrIfTxV6DiscardBytesHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.69	Counter32	read-only	The value of vRtrIfTxV6DiscardBytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV6DiscardBytes.
C32 vRtrIfTxV6DiscardBytesLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.68	Counter32	read-only	The value of vRtrIfTxV6DiscardBytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV6DiscardBytes.
C64 vRtrIfTxV6DiscardPkts	1.3.6.1.4.1.7483.6.1.2.3.54.1.64	Counter64	read-only	The value of vRtrIfTxV6DiscardPkts indicates the number of total IPv6 transmit packets discarded by this interface.
C32 vRtrIfTxV6DiscardPktsHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.66	Counter32	read-only	The value of vRtrIfTxV6DiscardPktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV6DiscardPkts.
C32 vRtrIfTxV6DiscardPktsLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.65	Counter32	read-only	The value of vRtrIfTxV6DiscardPktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV6DiscardPkts.
C64 vRtrIfTxV6Pkts	1.3.6.1.4.1.7483.6.1.2.3.54.1.52	Counter64	read-only	The value of vRtrIfTxV6Pkts indicates the number of total IPv6 packets sent from this interface.
C32 vRtrIfTxV6PktsHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.54	Counter32	read-only	The value of vRtrIfTxV6PktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV6Pkts.
C32 vRtrIfTxV6PktsLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.53	Counter32	read-only	The value of vRtrIfTxV6PktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV6Pkts.
INT vRtrIfType	1.3.6.1.4.1.7483.6.1.2.3.4.1.3	INTEGER	read-create	The value of vRtrIfType specifies the type of this interface. Different virtual router interface types are defined as follows: network - defined on a network port. service - used internally. serviceIes - defined on a SAP or Spoke SDP. serviceRtdVpls - obsoleted. serviceVprn - defined on a SAP or Spoke SDP. serviceIesSubscriber - used internally. serviceIesGroup - defined on a SAP serviceVprnSubscriber - used internally. serviceVprnGroup - defined on a SAP. serviceIesRedundant - defined on a Spoke SDP. serviceVprnRedundant - defined on a Spoke SDP. serviceVpls - defined on an IP endpoint for VPLS. serviceIesCem - defined on a SAP. --not supported serviceVprnCem - defined on a SAP. --not supported serviceVprnIPsec - defined on a SAP. serviceVprnIPMirror - defined on a Mirror. serviceVideo - defined on a video SAP. serviceVplsVideo - defined on an IP endpoint for video interface for VPLS. multiHomingPrimary - defined for a primary interface. multiHomingSecondary - defined for a secondary interface. serviceIesTunnel - defined on a SAP. serviceIpReas - defined on a network port. networkIpReas - defined on a network port. networkVprn - network interface defined in a VPRN. tmsService - threat management service interface. serviceIesAarp - defined on an AARP (Assymetry Removal) Spoke SDP. serviceVprnAarp - defined on an AARP Spoke SDP. serviceIesAa - defined on an AA (Application Assurance) SAP. serviceVprnAa - defined on an AA SAP. unnumMplsTp - defined for an unummbered mpls tp interface.
IP vRtrIfUnnumbered	1.3.6.1.4.1.7483.6.1.2.3.4.1.24	IpAddress	read-create	The IP address to be used when generating packets on this interface. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0.0.0.0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null. A value of '255.255.255.255' implies the use of system-ip. It is strongly suggested to use the node's system IP address as it is not associated with a particular physical interface and is therefore always reachable.
STR vRtrIfUnnumberedIf	1.3.6.1.4.1.7483.6.1.2.3.4.1.31	DisplayString	read-create	The name of the interface to which this unnumbered interface will refer to. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null.
C64 vRtrIfuRPFCheckFailBytes	1.3.6.1.4.1.7483.6.1.2.3.54.1.4	Counter64	read-only	The value of vRtrIfuRPFCheckFailBytes indicates the number of bytes in the packets that fail uRPF check.
C32 vRtrIfuRPFCheckFailBytesHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.6	Counter32	read-only	The value of vRtrIfuRPFCheckFailBytesHigh32 indicates the high 32 bits of the value of vRtrIfuRPFCheckFailBytes.
C32 vRtrIfuRPFCheckFailBytesLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.5	Counter32	read-only	The value of vRtrIfuRPFCheckFailBytesLow32 indicates the lower 32 bits of the value of vRtrIfuRPFCheckFailBytes.
C64 vRtrIfuRPFCheckFailPkts	1.3.6.1.4.1.7483.6.1.2.3.54.1.1	Counter64	read-only	The value of vRtrIfuRPFCheckFailPkts indicates the number of packets that fail uRPF check on this interface.
C32 vRtrIfuRPFCheckFailPktsHigh32	1.3.6.1.4.1.7483.6.1.2.3.54.1.3	Counter32	read-only	The value of vRtrIfuRPFCheckFailPktsHigh32 indicates the high 32 bits of the value of vRtrIfuRPFCheckFailPkts.
C32 vRtrIfuRPFCheckFailPktsLow32	1.3.6.1.4.1.7483.6.1.2.3.54.1.2	Counter32	read-only	The value of vRtrIfuRPFCheckFailPktsLow32 indicates the lower 32 bits of the value of vRtrIfuRPFCheckFailPkts.
INT vRtrIfuRPFCheckMode	1.3.6.1.4.1.7483.6.1.2.3.4.1.73	INTEGER	read-create	The value of vRtrIfuRPFCheckMode specifies the mode of unicast RPF check. In 'strict' mode, uRPF checks whether incoming packet has a source address that matches a prefix in the routing table, and whether the interface expects to receive a packet with this source address prefix. In 'loose' mode, uRPF checks whether incoming packet has source address with a corresponding prefix in the routing table, however 'loose' mode does not check whether the interface expects to receive a packet with a specific source address prefix. This object is valid only when value of vRtrIfuRPFCheckState is set to 'enabled'.
TMN vRtrIfuRPFCheckState	1.3.6.1.4.1.7483.6.1.2.3.4.1.72	TmnxEnabledDisabled	read-create	The value of vRtrIfuRPFCheckState specifies whether unicast RPF (uRPF) Check is enabled on this interface.
INT vRtrIfVPNClass	1.3.6.1.4.1.7483.6.1.2.3.4.1.33	INTEGER	read-only	The value of vRtrIfVPNClass specifies the type of VPN scenario supported on this virtual router interface.
TMN vRtrIgmpStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.31	TmnxStatus	read-create	The desired state for IGMP on this virtual router. An attempt to set vRtrIgmpStatus to 'delete' will fail if the IGMP protocol is not in the administrative outOfService state, i.e. TN-IGMP-MIB::vRtrIgmpGenAdminState must be set to 'outOfService'.
T/F vRtrIgnoreIcmpRedirect	1.3.6.1.4.1.7483.6.1.2.3.1.1.40	TruthValue	read-create	If the value of vRtrIgnoreIcmpRedirect is 'true', the virtual router will drop all ICMP Redirects received on the management interface. If the value of vRtrIgnoreIcmpRedirect is 'false' and an ICMP Redirect is received on the management interface, a /32 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
T/F vRtrIgnoreNextHopMetric	1.3.6.1.4.1.7483.6.1.2.3.1.1.52	TruthValue	read-create	The value of vRtrIgnoreNextHopMetric specifies whether next-hop metric should be ignored when computing ECMP paths for VPRN routes.
U32 vRtrIllegalLabelThreshold	1.3.6.1.4.1.7483.6.1.2.3.1.1.22	Unsigned32	read-create	The value of vRtrIllegalLabelThreshold specifies the allowed limit for illegal label violations on this VRF. When this limit is exceeded a tmnxVRtrIllegalLabelTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
T/F vRtrInterASMvpn	1.3.6.1.4.1.7483.6.1.2.3.1.1.64	TruthValue	read-only	When the object vRtrType has a value of 'vprn', the value of vRtrInterASMvpn indicates whether the VPRN service is used for inter-AS MVPN or not. If the value of the object is 'true', it indicates that the vprn service is used for inter-AS MVPN only. If the value of the object is 'false', it indicates that the vprn service is not used for inter-AS MVPN.
vRtrIpAddrEntry	1.3.6.1.4.1.7483.6.1.2.3.6.1		not-accessible	Each row entry represents an IP address assigned a virtual router interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires a values for all column variables to have been assigned.
vRtrIpAddrTable	1.3.6.1.4.1.7483.6.1.2.3.6		not-accessible	The vRtrIpAddrTable has an entry for each IP address configured for a virtual router in the system. An interface on the virtual router may have more than one IP address assigned to it.
U32 vRtrIPv6HighRouteThreshold	1.3.6.1.4.1.7483.6.1.2.3.1.1.48	Unsigned32	read-only	The value of vRtrIPv6HighRouteThreshold specifies the high-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6HighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
T/F vRtrIPv6IgnoreIcmpRedirect	1.3.6.1.4.1.7483.6.1.2.3.1.1.50	TruthValue	read-create	If the value of vRtrIPv6IgnoreIcmpRedirect is 'true', the virtual router will drop all IPv6 ICMP Redirects received on the management interface. If the value of vRtrIPv6IgnoreIcmpRedirect is 'false' and an IPv6 ICMP Redirect is received on the management interface, a /128 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIPv6IgnoreIcmpRedirect will fail with an 'inconsistentValue' error.
I32 vRtrIPv6MaxNumRoutes	1.3.6.1.4.1.7483.6.1.2.3.1.1.46	Integer32	read-create	The maximum number of IPv6 routes that can be configured on this virtual router. If the value is -1, then there is no limit. This object is not supported on SR-1, where the value of TN-CHASSIS-MIB::tmnxChassisType is '5'.
T/F vRtrIPv6MaxNumRoutesLogOnly	1.3.6.1.4.1.7483.6.1.2.3.1.1.49	TruthValue	read-create	The value of vRtrIPv6MaxNumRoutesLogOnly specifies the action to be taken when the maximum number of IPv6 routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
U32 vRtrIPv6MidRouteThreshold	1.3.6.1.4.1.7483.6.1.2.3.1.1.47	Unsigned32	read-create	The value of vRtrIPv6MidRouteThreshold specifies the mid-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6MidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
U32 vRtrIPv6RouteThresholdSoakTime	1.3.6.1.4.1.7483.6.1.2.3.15.6	Unsigned32	read-write	The value of object vRtrIPv6RouteThresholdSoakTime specifies the soak interval in seconds before another tmnxVRtrIPv6HighRouteTCA notification will be re-issued, after the generation of a tmnxVRtrIPv6HighRouteTCA notification. Imposing this soak period prevents continuous generation of notifications by the agent, in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrIPv6HighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrIPv6MidRouteThreshold.
G32 vRtrISISActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.11	Gauge32	read-only	vRtrISISActiveRoutes indicates the current number of active isis routes for this instance of the route table.
G32 vRtrISISRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.10	Gauge32	read-only	vRtrISISRoutes indicates the current number of isis routes for this instance of the route table.
TMN vRtrIsIsStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.15	TmnxStatus	read-create	The desired state for ISIS on this virtual router. An attempt to set vRtrIsIsStatus to 'delete' will fail if the ISIS protocol is not in the administrative outOfService state.
G32 vRtrLDPActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.74	Gauge32	read-only	vRtrLDPActiveRoutes indicates the current number of active ldp routes for this instance of the route table.
G32 vRtrLDPRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.73	Gauge32	read-only	vRtrLDPRoutes indicates the current number of ldp routes for this instance of the route table.
TMN vRtrLdpStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.14	TmnxStatus	read-create	The desired state for LDP on this virtual router. An attempt to set vRtrLdpStatus to 'delete' will fail if the LDP protocol is not in the administrative outOfService state, i.e. TN-LDP-MIB::vRtrLdpGenAdminState must be set to 'outOfService'.
G32 vRtrManagedActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.72	Gauge32	read-only	The value of vRtrManagedActiveRoutes indicates the total number of active managed routes for the specified virtual router in the system.
G32 vRtrManagedRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.71	Gauge32	read-only	The value of vRtrManagedRoutes indicates the total number of active and inactive managed routes for the specified virtual router in the system.
U32 vRtrMaxARPEntries	1.3.6.1.4.1.7483.6.1.2.3.15.5	Unsigned32	read-only	vRtrMaxARPEntries indicates the maximum number of active and inactive ARP entries supported across all virtual routers in the system.
I32 vRtrMaxMcastNumRoutes	1.3.6.1.4.1.7483.6.1.2.3.1.1.37	Integer32	read-create	The maximum number of multicast routes that can be configured on this virtual router. If the value is -1, then there is no limit.
T/F vRtrMaxMcastNumRoutesLogOnly	1.3.6.1.4.1.7483.6.1.2.3.1.1.38	TruthValue	read-create	The value of vRtrMaxMcastNumRoutesLogOnly specifies the action to be taken when the maximum number of multicast routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new multicast routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
I32 vRtrMaxNumRoutes	1.3.6.1.4.1.7483.6.1.2.3.1.1.5	Integer32	read-create	The maximum number of routes that can be configured on this virtual router. If the value is -1, then there is no limit.
T/F vRtrMaxNumRoutesLogOnly	1.3.6.1.4.1.7483.6.1.2.3.1.1.32	TruthValue	read-create	The value of vRtrMaxNumRoutesLogOnly specifies the action to be taken when the maximum number of routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled.
U32 vRtrMcastMidRouteThreshold	1.3.6.1.4.1.7483.6.1.2.3.1.1.39	Unsigned32	read-create	The value of vRtrMcastMidRouteThreshold specifies the mid-level water marker for the number of multicast routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMcastMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
TNA vRtrMcPathMgmtPlcyName	1.3.6.1.4.1.7483.6.1.2.3.1.1.51	TNamedItem	read-create	The value of vRtrMcPathMgmtPlcyName specifies the multicast policy name configured on this virtual router.
U32 vRtrMidRouteThreshold	1.3.6.1.4.1.7483.6.1.2.3.1.1.20	Unsigned32	read-create	The value of vRtrMidRouteThreshold specifies the mid-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent.
TMN vRtrMldStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.45	TmnxStatus	read-create	The desired state for Multicast Listener Discovery (MLD) Protocol on this virtual router. An attempt to set vRtrMldStatus to 'delete' will fail if the MLD protocol is not in the administrative outOfService state, i.e. TN-MLD-MIB::vRtrMldGenAdminState must be set to 'outOfService'.
G32 vRtrMobileHostActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.82	Gauge32	read-only	The value of vRtrMobileHostActiveRoutes indicates the current number of IPv4 active Mobile Host routes for this instance of the route table.
G32 vRtrMobileHostRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.81	Gauge32	read-only	The value of vRtrMobileHostRoutes indicates the current number of IPv4 Mobile Host routes for this instance of the route table.
TMN vRtrMplsStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.7	TmnxStatus	read-create	The desired state for MPLS on this virtual router. An attempt to set vRtrMplsStatus to 'delete' will fail if the MPLS protocol is not in the administrative outOfService state, i.e. TN-MPLS-MIB::vRtrMplsGeneralAdminState must be set to 'outOfService'.
TMN vRtrMsdpStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.42	TmnxStatus	read-create	The desired state for Msdp on this virtual router. An attempt to set vRtrMsdpStatus to 'delete' will fail if the Msdp protocol is not in the administrative outOfService state, i.e. TN-MSDP-MIB::tmnxMsdpAdminState must be set to 'outOfService'.
G32 vRtrMulticastRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.26	Gauge32	read-only	vRtrMulticastRoutes indicates the current number of rows in the vRtrPimNgGrpSrcTable.
TNA vRtrMvpnCMcastImportRT	1.3.6.1.4.1.7483.6.1.2.3.1.1.61	TNamedItemOrEmpty	read-only	The value of vRtrMvpnCMcastImportRT indicates C-multicast Import Route that uniquely identifies a VRF. vRtrMvpnCMcastImportRT controls imports of C-multicast routes into a particular VRF. A PE that has sites of a given MVPN connected to it needs to communicate the value of the C-multicast Import RT associated with the VRF of that MVPN on the PE to all other PEs that have sites of that MVPN. A PE that originates a (unicast) route to VPN-IP addresses must include in the BGP Update message the value of the C-multicast Import RT of the VRF associated with the route.
TNA vRtrMvpnVrfExportTarget	1.3.6.1.4.1.7483.6.1.2.3.1.1.54	TNamedItemOrEmpty	read-create	The value of vRtrMvpnVrfExportTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrMvpnVrfTarget has been set.
T/F vRtrMvpnVrfExportTargetUnicast	1.3.6.1.4.1.7483.6.1.2.3.1.1.57	TruthValue	read-create	The value of vRtrMvpnVrfExportTargetUnicast specifies whether unicast vrf-target import extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfExportTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfExportTarget extended community is used for MVPN.
TNA vRtrMvpnVrfImportTarget	1.3.6.1.4.1.7483.6.1.2.3.1.1.55	TNamedItemOrEmpty	read-create	The value of vRtrMvpnVrfImportTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrMvpnVrfTarget has been set.
T/F vRtrMvpnVrfImportTargetUnicast	1.3.6.1.4.1.7483.6.1.2.3.1.1.58	TruthValue	read-create	The value of vRtrMvpnVrfImportTargetUnicast specifies whether unicast vrf-target export extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfImportTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfImportTarget extended community is used for MVPN.
TNA vRtrMvpnVrfTarget	1.3.6.1.4.1.7483.6.1.2.3.1.1.53	TNamedItemOrEmpty	read-create	The value of vRtrMvpnVrfTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrMvpnVrfExportTarget or vRtrMvpnVrfImportTarget has been set.
T/F vRtrMvpnVrfTargetUnicast	1.3.6.1.4.1.7483.6.1.2.3.1.1.56	TruthValue	read-create	The value of vRtrMvpnVrfTargetUnicast specifies whether unicast vrf-target extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfTarget extended community is used for MVPN.
TNA vRtrName	1.3.6.1.4.1.7483.6.1.2.3.1.1.4	TNamedItemOrEmpty	read-create	The administritive name for this virtual router. The router name must be unique among all virtual routers in the system. For row creation to succeed a value must be specified for vRtrName. When a row is created in the vRtrConfTable for a service vprn (i.e. when vRtrType is set to 'vprn'), the agent automatically assigns the name 'vprn'.
G32 vRtrNatActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.88	Gauge32	read-only	The value of vRtrNatActiveRoutes indicates the current number of IPv4 NAT routes for this instance of the route table.
G32 vRtrNatRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.87	Gauge32	read-only	The value of vRtrNatRoutes indicates the current number of IPv4 NAT (Network Address Translation) routes for this instance of the route table.
TES vRtrNewIfIndex	1.3.6.1.4.1.7483.6.1.2.3.1.1.13	TestAndIncr	read-create	This object is used to assign values to vRtrIfIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrIfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
TES vRtrNextVRtrID	1.3.6.1.4.1.7483.6.1.2.3.15.1	TestAndIncr	read-create	The vRtrNextVRtrID object is used to assign values to vRtrID to be used to create a new row in the vRtrConfTable as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrConfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions.
TMN vRtrOperState	1.3.6.1.4.1.7483.6.1.2.3.2.1.1	TmnxOperState	read-only	vRtrOperState indicates current operational status of this virtual router.
G32 vRtrOSPFActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.7	Gauge32	read-only	vRtrOSPFActiveRoutes indicates the current number of active ospf routes for this instance of the route table.
G32 vRtrOSPFRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.6	Gauge32	read-only	vRtrOSPFRoutes indicates the current number of ospf routes for this instance of the route table.
TMN vRtrOspfStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.8	TmnxStatus	read-create	The desired state for OSPFv2 on this virtual router. An attempt to set vRtrOspfStatus to 'delete' will fail if the OSPFv2 protocol is not in the administrative outOfService state, i.e. TN-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
TMN vRtrOspfv3Status	1.3.6.1.4.1.7483.6.1.2.3.1.1.41	TmnxStatus	read-create	The desired state for OSPFv3 on this virtual router. An attempt to set vRtrOspfv3Status to 'delete' will fail if the OSPFv3 protocol is not in the administrative outOfService state, i.e. TN-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0.
G32 vRtrPeriodicActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.92	Gauge32	read-only	The value of vRtrPeriodicActiveRoutes indicates the current number of active periodic routes for this instance of the route table.
G32 vRtrPeriodicRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.91	Gauge32	read-only	The value of vRtrPeriodicRoutes indicates the current number of periodic routes for this instance of the route table.
TMN vRtrPimStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.36	TmnxStatus	read-create	The desired state for PIM on this virtual router. When the object is set to 'create', PIM protocol instance is enabled on the virtual router. Setting the value to 'delete' disables PIM on the virtual router.
G32 vRtrRIPActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.13	Gauge32	read-only	vRtrRIPActiveRoutes indicates the current number of active rip routes for this instance of the route table.
G32 vRtrRIPRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.12	Gauge32	read-only	vRtrRIPRoutes indicates the current number of rip routes for this instance of the route table.
TMN vRtrRipStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.9	TmnxStatus	read-create	The desired state for RIP on this virtual router. An attempt to set vRtrRipStatus to 'delete' will fail if the RIP protocol is not in the admininistrative outOfService state.
TMN vRtrRouteDistinguisher	1.3.6.1.4.1.7483.6.1.2.3.1.1.19	TmnxVPNRouteDistinguisher	read-create	The value of vRtrRouteDistinguisher is an identifier attached to routes that distinguishes to which VPN it belongs. The VPRN cannot be operationally 'inService' until a route distinguisher has been assigned.
IP vRtrRouterId	1.3.6.1.4.1.7483.6.1.2.3.1.1.16	IpAddress	read-create	A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses.
U32 vRtrRouteThresholdSoakTime	1.3.6.1.4.1.7483.6.1.2.3.15.4	Unsigned32	read-write	Following the generation of a tmnxVRtrHighRouteTCA notification, the value of vRtrRouteThresholdSoakTime indicates the soak interval in seconds before another tmnxVRtrHighRouteTCA notification will be re-issued. Imposing this soak period prevents continuous generation of notifications by the agent in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrHighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrMidRouteThreshold.
ROW vRtrRowStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.2	RowStatus	read-create	The row status. The creation or deletion of a virtual router entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID value. Note that it is not allowed to 'destroy' the row entry for vRtrID = 1. In order for row creation to succeed, values for vRtrName and vRtrType must be included in the same SNMP SET PDU as vRtrRowStatus.
TMN vRtrRsvpStatus	1.3.6.1.4.1.7483.6.1.2.3.1.1.10	TmnxStatus	read-create	The desired state for RSVP on this virtual router. An attempt to set vRtrRsvpStatus to 'delete' will fail if the RSVP protocol is not in the administrative outOfService state, i.e. TN-RSVP-MIB::vRtrRsvpGeneralAdminState must be set to 'outOfService'.
TMN vRtrSecondaryVrfId	1.3.6.1.4.1.7483.6.1.2.3.1.1.44	TmnxVRtrIDOrZero	read-only	The unique value of vRtrSecondaryVrfId specifies the secondary vrf-id for hub and spoke vprn. Non-zero value of vRtrSecondaryVrfId indicates that two route-tables exist for hub and spoke vprn system one each for hub and spoke. One of which is indexed by vRtrSecondaryVrfId. If the value of vRtrSecondaryVrfId is zero, it indicates that there is only one route-table for hub and spoke vprn system.
TMN vRtrServiceId	1.3.6.1.4.1.7483.6.1.2.3.1.1.29	TmnxServId	read-only	When vRtrType has a value of 'vprn', the value of vRtrServiceId indicates the service-id of the associated service that created this row entry.
G32 vRtrStatActiveARPEntries	1.3.6.1.4.1.7483.6.1.2.3.2.1.27	Gauge32	read-only	vRtrStatActiveARPEntries indicates the number of active ARP entries for the specified virtual router in the system.
G32 vRtrStatActiveBgpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.86	Gauge32	read-only	vRtrStatActiveBgpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'bgp'.
G32 vRtrStatActiveIfs	1.3.6.1.4.1.7483.6.1.2.3.2.1.17	Gauge32	read-only	vRtrStatActiveIfs indicates the current number of router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
G32 vRtrStatActiveLdpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.24	Gauge32	read-only	vRtrStatActiveLdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
G32 vRtrStatActiveMplsTpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.98	Gauge32	read-only	vRtrStatActiveMplsTpTunnels indicates the current number of active MPLS-TP tunnels.
G32 vRtrStatActiveRsvpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.59	Gauge32	read-only	The value of vRtrStatActiveRsvpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
G32 vRtrStatActiveSdpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.25	Gauge32	read-only	vRtrStatActiveSdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
G32 vRtrStatBGPVpnActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.21	Gauge32	read-only	vRtrStatBGPVpnActiveRoutes indicates the current number of active VPN-IPV4 routes learned by MP-BGP for this virtual router.
G32 vRtrStatBGPVpnRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.20	Gauge32	read-only	vRtrStatBGPVpnRoutes indicates the current number of VPN-IPV4 routes learned by MP-BGP for this virtual router.
G32 vRtrStatConfiguredIfs	1.3.6.1.4.1.7483.6.1.2.3.2.1.16	Gauge32	read-only	vRtrStatConfiguredIfs indicates the current number of router interfaces configured on this virtual router.
G32 vRtrStatCurrNumRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.19	Gauge32	read-only	vRtrStatCurrNumRoutes indicates the current number of routes in the VRF for this virtual router.
G32 vRtrStatDynamicARPEntries	1.3.6.1.4.1.7483.6.1.2.3.2.1.68	Gauge32	read-only	The value of vRtrStatDynamicARPEntries indicates the total number of active and inactive dynamic ARP entries for the specified virtual router in the system.
vRtrStatEntry	1.3.6.1.4.1.7483.6.1.2.3.2.1		not-accessible	Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations.
G32 vRtrStaticActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.5	Gauge32	read-only	vRtrStaticActiveRoutes indicates the current number of active static routes for this instance of the route table.
G32 vRtrStaticRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.4	Gauge32	read-only	vRtrStaticRoutes indicates the current number of static routes for this instance of the route table.
C32 vRtrStatIllegalLabelsEx	1.3.6.1.4.1.7483.6.1.2.3.2.1.18	Counter32	read-only	vRtrStatIllegalLabels indicates the number of illegally received labels on this virtual router.
G32 vRtrStatInternalARPEntries	1.3.6.1.4.1.7483.6.1.2.3.2.1.70	Gauge32	read-only	The value of vRtrStatInternalARPEntries indicates the total number of active and inactive internal ARP entries for the specified virtual router in the system.
G32 vRtrStatLocalARPEntries	1.3.6.1.4.1.7483.6.1.2.3.2.1.66	Gauge32	read-only	The value of vRtrStatLocalARPEntries indicates the total number of active and inactive local ARP entries for the specified virtual router in the system.
G32 vRtrStatManagedARPEntries	1.3.6.1.4.1.7483.6.1.2.3.2.1.69	Gauge32	read-only	The value of vRtrStatManagedARPEntries indicates the total number of active and inactive managed ARP entries for the specified virtual router in the system.
G32 vRtrStatStaticARPEntries	1.3.6.1.4.1.7483.6.1.2.3.2.1.67	Gauge32	read-only	The value of vRtrStatStaticARPEntries indicates the total number of active and inactive static ARP entries for the specified virtual router in the system.
vRtrStatTable	1.3.6.1.4.1.7483.6.1.2.3.2		not-accessible	The vRtrStatTable has an entry for each virtual router configured in the system.
G32 vRtrStatTotalARPEntries	1.3.6.1.4.1.7483.6.1.2.3.2.1.28	Gauge32	read-only	vRtrStatTotalARPEntries indicates the total number of active and inactive ARP entries for the specified virtual router in the system.
G32 vRtrStatTotalBgpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.85	Gauge32	read-only	vRtrStatTotalBgpTunnels indicates the current number of both active and inactive BGP tunnels.
G32 vRtrStatTotalLdpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.22	Gauge32	read-only	vRtrStatTotalLdpTunnels indicates the current number of both active and inactive LDP tunnels.
G32 vRtrStatTotalMplsTpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.97	Gauge32	read-only	vRtrStatTotalMplsTpTunnels indicates the current number of both active and inactive MPLS-TP tunnels.
G32 vRtrStatTotalRsvpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.58	Gauge32	read-only	The value of vRtrStatTotalRsvpTunnels indicates the current number of both active and inactive RSVP tunnels.
G32 vRtrStatTotalSdpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.23	Gauge32	read-only	vRtrStatTotalSdpTunnels indicates the current number of both active and inactive SDP tunnels.
G32 vRtrSubMgmtActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.57	Gauge32	read-only	The value of vRtrSubMgmtActiveRoutes indicates the number of active subscriber management routes.
G32 vRtrSubMgmtRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.56	Gauge32	read-only	The value of vRtrSubMgmtRoutes indicates the total number of subscriber management routes in the route Table.
T/F vRtrTriggeredPolicy	1.3.6.1.4.1.7483.6.1.2.3.1.1.17	TruthValue	read-create	If the value of vRtrTriggeredPolicy is 'false', all routing protocols automatically reevaluate their routes when the route policies are changed. If this value is 'true', then the user must trigger the recalculation of routes when the route policies are changed.
INT vRtrType	1.3.6.1.4.1.7483.6.1.2.3.1.1.28	INTEGER	read-create	The value of vRtrType specifies the type of virtual router represented by this row entry. When a row is created in this table using 'createAndGo', vRtrType must be specified or the row creation will fail. Only the value of 'vr (3)' can be set with a SNMP SET request. The other values are used for row entries created internally by the agent. The value of vRtrType cannot be modified if vRtrRowStatus has a value of 'active'.
G32 vRtrV6AggregateActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.42	Gauge32	read-only	vRtrV6AggregateActiveRoutes indicates the current number of active v6 aggregate routes for this instance of the route table.
G32 vRtrV6AggregateRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.41	Gauge32	read-only	vRtrV6AggregateRoutes indicates the current number of v6 aggregate routes for this instance of the route table.
G32 vRtrV6BGPActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.36	Gauge32	read-only	vRtrV6BGPActiveRoutes indicates the current number of v6 active bgp routes for this instance of the route table.
G32 vRtrV6BGPRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.35	Gauge32	read-only	vRtrV6BGPRoutes indicates the current number of v6 bgp routes for this instance of the route table.
G32 vRtrV6DirectActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.30	Gauge32	read-only	vRtrV6DirectActiveRoutes indicates the current number of v6 active direct routes for this instance of the route table.
G32 vRtrV6DirectRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.29	Gauge32	read-only	vRtrV6DirectRoutes indicates the current number of v6 direct routes for this instance of the route table.
G32 vRtrV6HostActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.65	Gauge32	read-only	The value of vRtrV6HostActiveRoutes indicates the current number of v6 active direct routes with prefix value 128 for this instance of the route table.
G32 vRtrV6HostRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.64	Gauge32	read-only	The value of vRtrV6HostRoutes indicates the current number of v6 direct routes with prefix value 128 for this instance of the route table.
G32 vRtrV6ISISActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.38	Gauge32	read-only	vRtrV6ISISActiveRoutes indicates the current number of v6 active isis routes for this instance of the route table.
G32 vRtrV6ISISRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.37	Gauge32	read-only	vRtrV6ISISRoutes indicates the current number of v6 isis routes for this instance of the route table.
G32 vRtrV6MobileHostActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.84	Gauge32	read-only	The value of vRtrV6MobileHostActiveRoutes indicates the current number of IPv6 active Mobile Host routes for this instance of the route table.
G32 vRtrV6MobileHostRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.83	Gauge32	read-only	The value of vRtrV6MobileHostRoutes indicates the current number of IPv6 Mobile Host routes for this instance of the route table.
G32 vRtrV6MulticastRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.53	Gauge32	read-only	vRtrV6MulticastRoutes indicates the current number of v6 rows in the vRtrPimNgGrpSrcTable.
G32 vRtrV6NatActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.90	Gauge32	read-only	The value of vRtrV6NatActiveRoutes indicates the current number of IPv6 active NAT routes for this instance of the route table.
G32 vRtrV6NatRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.89	Gauge32	read-only	The value of vRtrV6NatRoutes indicates the current number of IPv6 NAT routes for this instance of the route table.
G32 vRtrV6OSPFActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.34	Gauge32	read-only	vRtrV6OSPFActiveRoutes indicates the current number of v6 active ospf routes for this instance of the route table.
G32 vRtrV6OSPFRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.33	Gauge32	read-only	vRtrV6OSPFRoutes indicates the current number of v6 ospf routes for this instance of the route table.
G32 vRtrV6PeriodicActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.94	Gauge32	read-only	The value of vRtrV6PeriodicActiveRoutes indicates the current number of active IPv6 periodic routes for this instance of the route table.
G32 vRtrV6PeriodicRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.93	Gauge32	read-only	The value of vRtrV6PeriodicRoutes indicates the current number of IPv6 periodic routes for this instance of the route table.
G32 vRtrV6RIPActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.40	Gauge32	read-only	vRtrV6RIPActiveRoutes indicates the current number of active v6 rip routes for this instance of the route table.
G32 vRtrV6RIPRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.39	Gauge32	read-only	vRtrV6RIPRoutes indicates the current number of v6 rip routes for this instance of the route table.
G32 vRtrV6StatActiveIfs	1.3.6.1.4.1.7483.6.1.2.3.2.1.44	Gauge32	read-only	vRtrV6StatActiveIfs indicates the current number of v6 router interfaces with vRtrIfAdminState equal 'inService' on this virtual router.
G32 vRtrV6StatActiveLdpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.51	Gauge32	read-only	vRtrV6StatActiveLdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'.
G32 vRtrV6StatActiveNbrEntries	1.3.6.1.4.1.7483.6.1.2.3.2.1.54	Gauge32	read-only	vRtrV6StatActiveNbrEntries indicates the number of active V6 neighbor discovery entries for the specified virtual router in the system.
G32 vRtrV6StatActiveRsvpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.61	Gauge32	read-only	The value of vRtrV6StatActiveRsvpTunnels indicates the current number of IPv6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'.
G32 vRtrV6StatActiveSdpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.52	Gauge32	read-only	vRtrV6StatActiveSdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'.
G32 vRtrV6StatBGPVpnActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.48	Gauge32	read-only	vRtrV6StatBGPVpnActiveRoutes indicates the current number of active VPN-IPV6 routes learned by MP-BGP for this virtual router.
G32 vRtrV6StatBGPVpnRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.47	Gauge32	read-only	vRtrV6StatBGPVpnRoutes indicates the current number of VPN-IPV6 routes learned by MP-BGP for this virtual router.
G32 vRtrV6StatConfiguredIfs	1.3.6.1.4.1.7483.6.1.2.3.2.1.43	Gauge32	read-only	vRtrV6StatConfiguredIfs indicates the current number of v6 router interfaces configured on this virtual router.
G32 vRtrV6StatCurrNumRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.46	Gauge32	read-only	vRtrV6StatCurrNumRoutes indicates the current number of v6 routes in the VRF for this virtual router.
G32 vRtrV6StaticActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.32	Gauge32	read-only	vRtrV6StaticActiveRoutes indicates the current number of v6 active static routes for this instance of the route table.
G32 vRtrV6StaticRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.31	Gauge32	read-only	vRtrV6StaticRoutes indicates the current number of v6 static routes for this instance of the route table.
C32 vRtrV6StatIllegalLabels	1.3.6.1.4.1.7483.6.1.2.3.2.1.45	Counter32	read-only	vRtrV6StatIllegalLabels indicates the number of illegally received v6 labels on this virtual router.
G32 vRtrV6StatTotalLdpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.49	Gauge32	read-only	vRtrV6StatTotalLdpTunnels indicates the current number of both active and inactive v6 LDP tunnels.
G32 vRtrV6StatTotalNbrEntries	1.3.6.1.4.1.7483.6.1.2.3.2.1.55	Gauge32	read-only	vRtrV6StatTotalNbrEntries indicates the total number of active and inactive v6 neighbor discovery entries for the specified virtual router in the system.
G32 vRtrV6StatTotalRsvpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.60	Gauge32	read-only	The value of vRtrV6StatTotalRsvpTunnels indicates the current number of both active and inactive IPv6 RSVP tunnels.
G32 vRtrV6StatTotalSdpTunnels	1.3.6.1.4.1.7483.6.1.2.3.2.1.50	Gauge32	read-only	vRtrV6StatTotalSdpTunnels indicates the current number of both active and inactive v6 SDP tunnels.
G32 vRtrV6SubMgmtActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.80	Gauge32	read-only	vRtrV6SubMgmtActiveRoutes indicates the current number of v6 active subscriber management routes for this instance of the route table.
G32 vRtrV6SubMgmtRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.79	Gauge32	read-only	vRtrV6SubMgmtRoutes indicates the current number of v6 subscriber management routes for this instance of the route table.
G32 vRtrV6VPNLeakActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.78	Gauge32	read-only	vRtrV6VPNLeakActiveRoutes indicates the current number of v6 active VPN Leak routes for this instance of the route table.
G32 vRtrV6VPNLeakRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.77	Gauge32	read-only	vRtrV6VPNLeakRoutes indicates the current number of v6 VPN Leak routes for this instance of the route table.
TMN vRtrVpnId	1.3.6.1.4.1.7483.6.1.2.3.1.1.23	TmnxVPNId	read-create	The value of vRtrVpnId is the Virtual Private Network Identifier of this virtual router.
G32 vRtrVPNLeakActiveRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.76	Gauge32	read-only	vRtrVPNLeakActiveRoutes indicates the current number of active VPN Leak routes for this instance of the route table.
G32 vRtrVPNLeakRoutes	1.3.6.1.4.1.7483.6.1.2.3.2.1.75	Gauge32	read-only	vRtrVPNLeakRoutes indicates the current number of VPN Leak routes for this instance of the route table.
INT vRtrVprnType	1.3.6.1.4.1.7483.6.1.2.3.1.1.43	INTEGER	read-create	The value of vRtrVprnType specifies how traffic is routed. regular (1) - All traffic is routed to all destinations. hub (2) - Network traffic is routed only to the access side. Access traffic is routed to all destinations. spoke (3) - Networks traffic is routed to all destinations. Access traffic is routed only to the network side. subscriberSplitHorizon (4) - Subscriber-interface traffic is routed only to the network side. All other traffic is routed to all destinations. This object cannot be modified if vRtrType is not 'vprn'.
TNA vRtrVrfExportTarget	1.3.6.1.4.1.7483.6.1.2.3.1.1.34	TNamedItemOrEmpty	read-create	The value of vRtrVrfExportTarget specifies the extended community name for the default vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
TNA vRtrVrfImportTarget	1.3.6.1.4.1.7483.6.1.2.3.1.1.35	TNamedItemOrEmpty	read-create	The value of vRtrVrfImportTarget specifies the extended community name for the default vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set.
TNA vRtrVrfTarget	1.3.6.1.4.1.7483.6.1.2.3.1.1.33	TNamedItemOrEmpty	read-create	The value of vRtrVrfTarget specifies the extended community name for the default vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrVrfExportTarget or vRtrVrfImportTarget has been set.

RFC description

Manages Nokia carrier Ethernet virtual router instance configuration and routing parameters.

Start monitoring Nokia 7x50 SR-series service routers (virtual-router admin state/ARP-scaling status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TN-VRTR-MIB