TIMETRA-SAP-MIB :: sapIntendedEgressQosPolicyId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTIMETRA-SAP-MIBsapIntendedEgressQosPolicyId

sapIntendedEgressQosPolicyId

Module: TIMETRA-SAP-MIB

OID (symbolic): TIMETRA-SAP-MIB::sapIntendedEgressQosPolicyId

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.19

Node type: OBJECT-TYPE

Type: TSapEgressPolicyID

Access: read-only

Description: The value of the object sapIntendedEgressQosPolicyId indicates the index in the tSapEgressTable corresponding to the Egress Qos Policy that should be applied on this SAP. If it deviates from sapCurrentEgressQosPolicyId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.

What is sapIntendedEgressQosPolicyId?

This object stores the index identifying which outgoing traffic quality-of-service (QoS) policy should be applied to a Service Access Point (SAP), such as a port or virtual interface. If this intended policy differs from the currently active policy, it signals that the system encountered an issue when trying to switch policies, which can happen when using time-of-day policy scheduling. Network operators use this to diagnose QoS policy activation problems and confirm that the correct outgoing policy is in effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.19
snmpwalk -v2c -c public <target> TIMETRA-SAP-MIB::sapIntendedEgressQosPolicyId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.19.1
snmpget -v2c -c public <target> TIMETRA-SAP-MIB::sapIntendedEgressQosPolicyId.1

Start monitoring Nokia/Alcatel-Lucent 7x50 Service Router family, entire product line (Service Access Point admin/oper status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-SAP-MIB::sapIntendedEgressQosPolicyId OID value, configure state conditions and alerts, and monitor any Nokia/Alcatel-Lucent 7x50 Service Router family, entire product line (Service Access Point admin/oper status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2.4tmnxServObjsALCATEL-IND1-TIMETRA-SERV-MIB
1.3.6.1.4.1.6527.3.1.2.4.3tmnxSapObjsALCATEL-IND1-TIMETRA-SAP-MIB
1.3.6.1.4.1.6527.3.1.2.4.3.26sapTodMonitorTableALCATEL-IND1-TIMETRA-SAP-MIB
1.3.6.1.4.1.6527.3.1.2.4.3.26.1sapTodMonitorEntryALCATEL-IND1-TIMETRA-SAP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.4.3.26.1.19sapIntendedEgressQosPolicyIdTIMETRA-SAP-MIB