TIMETRA-SAP-MIB :: sapIntendedEgressIpv6FilterId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsTIMETRA-SAP-MIBsapIntendedEgressIpv6FilterId

sapIntendedEgressIpv6FilterId

Module: TIMETRA-SAP-MIB

OID (symbolic): TIMETRA-SAP-MIB::sapIntendedEgressIpv6FilterId

OID (numeric): 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.17

Node type: OBJECT-TYPE

Type: TFilterID

Access: read-only

Description: The value of the object sapIntendedEgressIpv6FilterId indicates the index in the tIPv6FilterTable corresponding to the Egress IPv6 filter scheduler that should be applied on this SAP. If it deviates from sapCurrentEgressIpv6FilterId, this means that there was a problem when trying to activate this filter. It can only deviate when using ToD Suites for the SAP. When the ToD Suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal.

What is sapIntendedEgressIpv6FilterId?

This read-only object indicates which egress IPv6 filter scheduler should theoretically be active on a Service Access Point (SAP), as intended by configuration or Time-of-Day policies. If it differs from the actual active filter, a configuration activation problem has occurred. Operators use this to diagnose why filter changes failed to take effect.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.17
snmpwalk -v2c -c public <target> TIMETRA-SAP-MIB::sapIntendedEgressIpv6FilterId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.6527.3.1.2.4.3.26.1.17.1
snmpget -v2c -c public <target> TIMETRA-SAP-MIB::sapIntendedEgressIpv6FilterId.1

Start monitoring Nokia/Alcatel-Lucent 7x50 Service Router family, entire product line (Service Access Point admin/oper status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIMETRA-SAP-MIB::sapIntendedEgressIpv6FilterId OID value, configure state conditions and alerts, and monitor any Nokia/Alcatel-Lucent 7x50 Service Router family, entire product line (Service Access Point admin/oper status) from a single console.

OID Breakdown

Upper-level ancestors (14 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.6527timetraALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3timetraProductsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1tmnxSRMIBALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2tmnxSRObjsALCATEL-IND1-TIMETRA-GLOBAL-MIB
1.3.6.1.4.1.6527.3.1.2.4tmnxServObjsALCATEL-IND1-TIMETRA-SERV-MIB
1.3.6.1.4.1.6527.3.1.2.4.3tmnxSapObjsALCATEL-IND1-TIMETRA-SAP-MIB
1.3.6.1.4.1.6527.3.1.2.4.3.26sapTodMonitorTableALCATEL-IND1-TIMETRA-SAP-MIB
1.3.6.1.4.1.6527.3.1.2.4.3.26.1sapTodMonitorEntryALCATEL-IND1-TIMETRA-SAP-MIB
Numeric OIDNameModule
1.3.6.1.4.1.6527.3.1.2.4.3.26.1.17sapIntendedEgressIpv6FilterIdTIMETRA-SAP-MIB