TIARARIP-MIB

All MIBs › TIARARIP-MIB

Organization: Tiara Networks Inc.

Last Updated: 1994-07-27

Category: IP Routing

Description: Manages Tiara Networks WAN router RIP routing protocol configuration and route table.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIARARIP-MIB?

TIARARIP-MIB is Tiara Networks' enterprise MIB for configuring and monitoring the RIP (Routing Information Protocol) implementation on its WAN routers. It exposes global RIP settings (protocol version, trusted-neighbor enforcement, source-address validation) and a per-interface configuration table covering RIP enable state, authentication string, and auto-summary/default-route announcement behavior. Its monitoring value is centered on dynamic routing protocol configuration and operational status: an operator can confirm RIP is enabled and correctly configured on each interface and that security options like trusted-neighbor/source validation are active, which helps diagnose routing instability or unexpected route advertisements. It complements more general IP routing MIBs (such as TIARA-IP-MIB) by adding RIP-specific protocol detail. It is typically deployed by operators running RIP as an interior routing protocol across a network of Tiara WAN routers, where TIARARIP-MIB SNMP monitoring supports ongoing verification of per-interface RIP configuration and security settings.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIARARIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Tiara Networks WAN router

Monitoring Examples

An administrator would check tiaraRipGlobalEnable and tiaraRipGlobalVersion to confirm RIP is running and which version, then review tiaraRipIfConfTable entries for a given tiaraRipIfConfIpAddr to verify tiaraRipIfConfEnable is set and tiaraRipIfConfAuthString matches its neighbor. If routes are missing or unstable, checking tiaraRipGlobalUseTrustedNeighbour and tiaraRipGlobalValidateSrcIpAddr alongside tiaraRipIfConfDefaultAnnounceEnable would reveal whether a security setting or announcement policy is suppressing expected route exchange.

What Can Be Monitored

global RIP enable status and version
per-interface RIP enable status
RIP authentication string configuration
auto-summary and default-route announcement settings

Imported Objects

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

From TIARA-NETWORKS-SMI

tiaraMgmt

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using tiaraRipStatRequestPktsSent OID:

Select a Tiara Networks WAN router (RIP protocol config/security status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tiaraRipStatRequestPktsSent into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of request packets sent on this interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
tiaraRipMib	1.3.6.1.4.1.3174.2.110			This file contains Tiara's enterprise specific MIB module for RIP implementation
tiaraRipGlobals	1.3.6.1.4.1.3174.2.110.1
T/F tiaraRoutingEnable	1.3.6.1.4.1.3174.2.110.1.1	TruthValue	read-write	This variable is used to globally enable/disable Routing. DEFVAL { false}
T/F tiaraRipGlobalEnable	1.3.6.1.4.1.3174.2.110.1.2	TruthValue	read-write	This variable is used to globally enable/disable RIP. The per- interface enable/disable override the setting of this variable
T/F tiaraRipGlobalUseTrustedNeighbour	1.3.6.1.4.1.3174.2.110.1.3	TruthValue	read-write	This variable is used to enable/disable the use of Trusted Neighbour
T/F tiaraRipGlobalValidateSrcIpAddr	1.3.6.1.4.1.3174.2.110.1.4	TruthValue	read-write	enable/disable validating source IP address
INT tiaraRipGlobalVersion	1.3.6.1.4.1.3174.2.110.1.5	INTEGER	read-write	version of RIP to be used. per-interface send and receive versions override the setting of this variable
tiaraRipIfConfTable	1.3.6.1.4.1.3174.2.110.2		not-accessible	A list of RIP interfaces and Per-Interface RIP Configuration Table
tiaraRipIfConfEntry	1.3.6.1.4.1.3174.2.110.2.1		not-accessible	A single RIP interface and its configuration parameters
IP tiaraRipIfConfIpAddr	1.3.6.1.4.1.3174.2.110.2.1.1	IpAddress	not-accessible	The IP Address assigned to the given RIP interface. This variable is also used to index into the table
STR tiaraRipIfConfAuthString	1.3.6.1.4.1.3174.2.110.2.1.2	DisplayString	read-create	The string to be used as the authentication key Setting this string to NULL value has the effect of disabling authentication. Setting this string to a non-value has the effect enabling authentication, with the value of the string used as authentication string. By default, the value of the string is null and hence authentication is disabled
T/F tiaraRipIfConfAutoSummaryEnable	1.3.6.1.4.1.3174.2.110.2.1.3	TruthValue	read-create	Used to enable/disable route summarization
T/F tiaraRipIfConfDefaultAnnounceEnable	1.3.6.1.4.1.3174.2.110.2.1.4	TruthValue	read-create	Used to enable/disable announcing RIP default route
T/F tiaraRipIfConfEnable	1.3.6.1.4.1.3174.2.110.2.1.5	TruthValue	read-create	enable/disable RIP for this interface. The value of this variable overrides the value of the Global variable, tiaraRipGlobalEnable
T/F tiaraRipIfConfAnnounceHostEnable	1.3.6.1.4.1.3174.2.110.2.1.6	TruthValue	read-create	enable/disable announcing IP host routes
T/F tiaraRipIfConfPassiveEnable	1.3.6.1.4.1.3174.2.110.2.1.7	TruthValue	read-create	suppress/do not suppress sending of routing updates
INT tiaraRipIfConfReceiveVersion	1.3.6.1.4.1.3174.2.110.2.1.8	INTEGER	read-create	configuration variable for RIP receive version for this interface
INT tiaraRipIfConfSendVersion	1.3.6.1.4.1.3174.2.110.2.1.9	INTEGER	read-create	configuration variable for RIP send version for this interface
T/F tiaraRipIfConfSplitHorizonEnable	1.3.6.1.4.1.3174.2.110.2.1.10	TruthValue	read-create	enable/disable split horizon
T/F tiaraRipIfConfStaticAnnounceEnable	1.3.6.1.4.1.3174.2.110.2.1.11	TruthValue	read-create	enable/disable announcing static IP routes
I32 tiaraRipIfConfUpdateTimer	1.3.6.1.4.1.3174.2.110.2.1.12	Integer32	read-create	The value of the Update Timer
I32 tiaraRipIfConfHoldDownTimer	1.3.6.1.4.1.3174.2.110.2.1.13	Integer32	read-create	The value of the hold-down timer
I32 tiaraRipIfConfFlushTimer	1.3.6.1.4.1.3174.2.110.2.1.14	Integer32	read-create	The value of the Flush Timer
I32 tiaraRipIfConfInvTimer	1.3.6.1.4.1.3174.2.110.2.1.15	Integer32	read-create	The value of the invalid timer
ROW tiaraRipIfConfRowStatus	1.3.6.1.4.1.3174.2.110.2.1.16	RowStatus	read-create	This variable is used to create/delete rows in the configuration table
tiaraRipStatTable	1.3.6.1.4.1.3174.2.110.3		not-accessible	A list of RIP interfaces for which the statistics are maintained
tiaraRipStatEntry	1.3.6.1.4.1.3174.2.110.3.1		not-accessible	per-interface statistics
C32 tiaraRipStatRequestPktsSentEx	1.3.6.1.4.1.3174.2.110.3.1.1	Counter32	read-only	Number of request packets sent on this interface
C32 tiaraRipStatResponsePktsSent	1.3.6.1.4.1.3174.2.110.3.1.2	Counter32	read-only	Number of response packets received on this interface
C32 tiaraRipStatPktsReceived	1.3.6.1.4.1.3174.2.110.3.1.3	Counter32	read-only	Total number of packets received on this interface
C32 tiaraRipStatRequestPktsReceived	1.3.6.1.4.1.3174.2.110.3.1.4	Counter32	read-only	Number of request packets received on this interface
C32 tiaraRipStatResponsePktsReceived	1.3.6.1.4.1.3174.2.110.3.1.5	Counter32	read-only	Number of response packets received on this interface
C32 tiaraRipStatUnrecognizedPktsReceived	1.3.6.1.4.1.3174.2.110.3.1.6	Counter32	read-only	Number of unrecognised packets received on this interface
C32 tiaraRipStatBadVersions	1.3.6.1.4.1.3174.2.110.3.1.7	Counter32	read-only	Number of invalid version packets received on this interface
C32 tiaraRipStatBadAddrFamilies	1.3.6.1.4.1.3174.2.110.3.1.8	Counter32	read-only	Number of invalid address family packets received on this interface
C32 tiaraRipStatBadRequestFormats	1.3.6.1.4.1.3174.2.110.3.1.9	Counter32	read-only	Number of invalid address format packets received on this interface
C32 tiaraRipStatBadMetrics	1.3.6.1.4.1.3174.2.110.3.1.10	Counter32	read-only	Tiara-fill
C32 tiaraRipStatBadResponseFormats	1.3.6.1.4.1.3174.2.110.3.1.11	Counter32	read-only	Tiara-fill
C32 tiaraRipStatResponsesNotFromRipPort	1.3.6.1.4.1.3174.2.110.3.1.12	Counter32	read-only	Tiara-fill
C32 tiaraRipStatResponsesRecdFromLoopBackIf	1.3.6.1.4.1.3174.2.110.3.1.13	Counter32	read-only	Number of responses received from loopback interface
C32 tiaraRipStatPktsRejected	1.3.6.1.4.1.3174.2.110.3.1.14	Counter32	read-only	Number of packets rejected on this interface
tiaraRipRejectAddrTable	1.3.6.1.4.1.3174.2.110.4		not-accessible	List of Reject IP addresses along with the interfaces they correspond to
tiaraRipRejectAddrEntry	1.3.6.1.4.1.3174.2.110.4.1		not-accessible	A single Reject IP address along with the interface that it corresponds to
IP tiaraRipRejectIpAddr	1.3.6.1.4.1.3174.2.110.4.1.1	IpAddress	not-accessible	The reject IpAddress for this interface
ROW tiaraRipRejectRowStatus	1.3.6.1.4.1.3174.2.110.4.1.2	RowStatus	read-create	Row Status variable used to create/delete rows in this table
tiaraRipAdvertiseAddrTable	1.3.6.1.4.1.3174.2.110.5		not-accessible	List of Advertise IP addresses along with the interfaces they correspond to
tiaraRipAdvertiseAddrEntry	1.3.6.1.4.1.3174.2.110.5.1		not-accessible	A single advertise IP address along with the interface it corresponds to
IP tiaraRipAdvertiseIpAddr	1.3.6.1.4.1.3174.2.110.5.1.1	IpAddress	not-accessible	One Advertise IpAddress for this interface
ROW tiaraRipAdvertiseRowStatus	1.3.6.1.4.1.3174.2.110.5.1.2	RowStatus	read-create	Row Status variable used to create/delete rows in this table
tiaraRipNeighbourAddrTable	1.3.6.1.4.1.3174.2.110.6		not-accessible	List of neighbour IP addresses along with the interfaces they correspond to
tiaraRipNeighbourAddrEntry	1.3.6.1.4.1.3174.2.110.6.1		not-accessible	A single neighbour IP address along with the interface it corresponds to
IP tiaraRipNeighbourIpAddr	1.3.6.1.4.1.3174.2.110.6.1.1	IpAddress	not-accessible	One neighbour IP address for this interface
ROW tiaraRipNeighbourRowStatus	1.3.6.1.4.1.3174.2.110.6.1.2	RowStatus	read-create	Row Status variable used to create/delete rows in this table
tiaraRipTrustedNeighbourAddrTable	1.3.6.1.4.1.3174.2.110.7		not-accessible	List of trusted neighbour IP addresses along with the interfaces they correspond to
tiaraRipTrustedNeighbourAddrEntry	1.3.6.1.4.1.3174.2.110.7.1		not-accessible	A single trusted neighbour IP address along with the interface it corresponds to
IP tiaraRipTrustedNeighbourAddr	1.3.6.1.4.1.3174.2.110.7.1.1	IpAddress	not-accessible	One Trusted Neighbour IP address for this interface
ROW tiaraRipTrustedNeighbourRowStatus	1.3.6.1.4.1.3174.2.110.7.1.2	RowStatus	read-create	Row Status variable used to create/delete rows in this table

RFC description

Manages RIP routing protocol configuration and monitoring for Tiara Networks routers including enable/disable controls and neighbor validation.

Start monitoring Tiara Networks WAN router (RIP protocol config/security status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIARARIP-MIB