TIARA-IP-MIB

All MIBs › TIARA-IP-MIB

Organization: Tiara Networks Inc.

Last Updated: 2000-01-27

Category: IP Routing

Description: Manages Tiara Networks WAN router IP routing configuration and forwarding statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIARA-IP-MIB?

TIARA-IP-MIB is Tiara Networks' enterprise MIB for managing IP-addressable interfaces and static routing on its WAN router products. It exposes a table of IP interfaces with their addresses, masks, peer addresses, and types, plus a static routing table for manually configured routes, alongside a global IP routing enable flag. Its monitoring value is centered on IP-layer configuration and connectivity status: an operator can verify each interface's IP configuration is correct and confirm static routes are present and correctly indexed, which is essential for diagnosing routing or addressing misconfigurations. It complements standard interface-layer MIBs (like IF-MIB) by adding Tiara-specific IP addressing detail. It is typically deployed by operators managing Tiara Networks WAN routers where static/point-to-point IP routing configuration needs verification. Engineers can download the TIARA-IP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIARA-IP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Tiara Networks WAN router

Monitoring Examples

An administrator would poll tiaraIpIfTable to review each entry's tiaraIpIfAddr, tiaraIpIfMask, and tiaraIpIfPeerAddr, confirming a WAN interface's IP addressing matches the intended point-to-point link configuration. Checking tiaraStaticRouteTable entries indexed by tiaraStaticRouteIndex against tiaraIpRoutingEnable would reveal whether a expected static route is missing or routing is globally disabled, explaining unreachable destinations. Mismatched tiaraIpIfType values across peer routers would similarly flag an interface-type misconfiguration causing a link to stay down.

What Can Be Monitored

IP interface address and mask
IP interface peer address and type
global IP routing enable status
static route table entries

Imported Objects

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

From TIARA-NETWORKS-SMI

tiaraMgmt

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
tiaraIpMib	1.3.6.1.4.1.3174.2.23			This MIB defines objects for IP addressable interfaces and the static routing table.
T/F tiaraIpRoutingEnable	1.3.6.1.4.1.3174.2.23.1	TruthValue	read-write	This object toggles between the IP routing and the IP muxing modes. If the IP routing mode is disabled, the IP muxing mode is enabled. If the IP routing mode is enabled, the IP muxing mode is disabled.
tiaraIpIfTable	1.3.6.1.4.1.3174.2.23.2		not-accessible	The TiaraIpIfTable defines objects for IP addressable interfaces that are currently configured on the Tiara system. It maps a unique index value to each interface.
tiaraIpIfTableEntry	1.3.6.1.4.1.3174.2.23.2.1		not-accessible	An entry in the TiaraIpIfTable that defines objects for a particular IP interface.
I32 tiaraIpIfIndex	1.3.6.1.4.1.3174.2.23.2.1.1	Integer32	read-only	This value identifies a particular IP interface and serves as an index for the tiarIpIfTable.
STR tiaraIpIfName	1.3.6.1.4.1.3174.2.23.2.1.2	DisplayString	read-only	A unique name associated with an IP interface.
IP tiaraIpIfAddr	1.3.6.1.4.1.3174.2.23.2.1.3	IpAddress	read-only	The unique IP address of an IP interface.
IP tiaraIpIfMask	1.3.6.1.4.1.3174.2.23.2.1.4	IpAddress	read-only	The network mask associated with an IP interface.
IP tiaraIpIfPeerAddr	1.3.6.1.4.1.3174.2.23.2.1.5	IpAddress	read-only	The IP address of the peer which is the other end of a point-to-point link. The peer IP address object is only valid for a WAN or point-to-point interface.
INT tiaraIpIfType	1.3.6.1.4.1.3174.2.23.2.1.6	INTEGER	read-only	This object identifies the type of interface as either Ethernet or WAN.
tiaraStaticRouteTable	1.3.6.1.4.1.3174.2.23.3		not-accessible	A list of static route table entries for this entity. The following variables are required for row creation: tiaraStaticRouteIndex = 65535 tiaraStaticRouteNetworkAddr = Destination IP address tiaraStaticRouteNetworkMask = Subnet mask tiaraStaticRouteGatewayAddr = Next hop IP address tiaraStaticRouteNoOfHops = Number of hops or metric tiaraStaticRouteRowStatus = createAndGo
tiaraStaticRouteEntry	1.3.6.1.4.1.3174.2.23.3.1		not-accessible	A single static route entry in the static route table.
INT tiaraStaticRouteIndex	1.3.6.1.4.1.3174.2.23.3.1.1	INTEGER	not-accessible	A numeric index for static route table entries. This index is internally generated by the SNMP agent, and it uniquely identifies a single entry in the table. To create a row in the table, use the invalid value 65535 for this variable. To query any variable in this table, use this variable, which can be found for a given (network address-network mask-gateway address) tuple using the snmp-walk operation.
IP tiaraStaticRouteNetworkAddr	1.3.6.1.4.1.3174.2.23.3.1.2	IpAddress	read-create	The destination IP address of this route. This can be either a complete host address for one particular host or or a network address for all the hosts on that network. An entry with a value of 0.0.0.0 for the network address is considered a default route.
IP tiaraStaticRouteNetworkMask	1.3.6.1.4.1.3174.2.23.3.1.3	IpAddress	read-create	The network mask associated with the network address
STR tiaraStaticRouteGatewayAddr	1.3.6.1.4.1.3174.2.23.3.1.4	DisplayString	read-create	This can either be the IP address of a next hop router or the IP address of a directly connected network. The next hop router receives datagrams from the Tiara system and forwards them to the final destination. This can also be an interface name.
INT tiaraStaticRouteNoOfHops	1.3.6.1.4.1.3174.2.23.3.1.5	INTEGER	read-create	The number of hops for this route.
ROW tiaraStaticRouteRowStatus	1.3.6.1.4.1.3174.2.23.3.1.6	RowStatus	read-create	Used to configure or delete a static route. To configure a route, set the value of this object to createAndGo. To delete a route, set the value of this object to destroy.

RFC description

Manages IP interfaces and static routing configuration on Tiara Networks systems.

Start monitoring Tiara Networks WAN router (IP interface/static-route config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIARA-IP-MIB

What Is TIARA-IP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description