All MIBs › TIARARIP-MIB › tiaraRoutingEnable
tiaraRoutingEnable
Module: TIARARIP-MIB
OID (symbolic): TIARARIP-MIB::tiaraRoutingEnable
OID (numeric): 1.3.6.1.4.1.3174.2.110.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This variable is used to globally enable/disable Routing. DEFVAL { false}
What is tiaraRoutingEnable?
A global read-write switch that turns IP routing on or off for the entire device, independent of RIP itself; an admin must have this enabled before any routing protocol, including RIP, can actually forward traffic between subnets.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3174.2.110.1.1 snmpwalk -v2c -c public <target> TIARARIP-MIB::tiaraRoutingEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3174.2.110.1.1.1 snmpget -v2c -c public <target> TIARARIP-MIB::tiaraRoutingEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3174.2.110.1.1.1 s <value>
Start monitoring Tiara Networks WAN router (RIP protocol config/security status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TIARARIP-MIB::tiaraRoutingEnable OID value, configure state conditions and alerts, and monitor any Tiara Networks WAN router (RIP protocol config/security status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3174 | tiaraNetworks | TIARA-NETWORKS-SMI |
| 1.3.6.1.4.1.3174.2 | tiaraMgmt | TIARA-NETWORKS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3174.2.110 | tiaraRipMib | TIARARIP-MIB |
| 1.3.6.1.4.1.3174.2.110.1 | tiaraRipGlobals | TIARARIP-MIB |
| 1.3.6.1.4.1.3174.2.110.1.1 | tiaraRoutingEnable | TIARARIP-MIB |