All MIBs › Nortel-Magellan-Passport-IpNhrpMIB
Category: IP Routing
Description: Manages Nortel Magellan Passport NHRP next-hop resolution protocol configuration and cache state.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Nortel-Magellan-Passport-IpNhrpMIB?
This is a Nortel-specific MIB for the Magellan Passport multiservice switching platform, extending the standard NHRP (Next Hop Resolution Protocol) framework used for IP-over-NBMA networks such as ATM. It exposes configuration and status tables for NHRP-enabled logical interfaces, tracking row status, storage type, and component naming for each NHRP instance. Its monitoring value is mainly operational/administrative: it lets an operator confirm whether NHRP service components are active(1) or have fallen out of service, which is a software-configuration health check rather than a hardware sensor reading like temperature or CPU load. It depends on the standard NHRP concept (RFC 2332) and on the broader Nortel Magellan Passport enterprise MIB tree from which its virtual-router (vrPp/vrIp) naming is drawn. It is deployed on legacy Nortel Passport WAN switches used for ATM/Frame Relay-to-IP interworking in service-provider or enterprise backbone networks, largely legacy equipment today. Engineers can download the Nortel-Magellan-Passport-IpNhrpMIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Nortel-Magellan-Passport-IpNhrpMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nortel Magellan Passport multiservice WAN switch/router
Monitoring Examples
An admin would poll vrIpNhrpRowStatusTable and vrPpIpPortLogicalIfNhrpIfRowStatusTable to confirm each NHRP-enabled logical interface component (identified via vrPpIpPortLogicalIfNhrpIfComponentName) reports an active row status; a value of notInService, or a StorageType of volatile after a reload, would reveal a lost or misconfigured NHRP mapping component. Because the available objects are limited to row-status/configuration tables rather than counters, this module is best used for confirming NHRP service presence and state rather than for performance-counter monitoring.
What Can Be Monitored
- NHRP interface row status (active/notInService)
- NHRP component storage type (volatile/nonVolatile)
- NHRP-enabled logical interface index
- virtual router NHRP component name
This MIB depends on
Related MIBs
Imported Objects
From Nortel-Magellan-Passport-IpMIB
| vrIp | OBJECT-IDENTITY |
| vrIpIndex | OBJECT-TYPE |
| vrPpIpPortIndex | OBJECT-TYPE |
| vrPpIpPortLogicalIf | OBJECT-IDENTITY |
| vrPpIpPortLogicalIfAddressIndex | OBJECT-TYPE |
From Nortel-Magellan-Passport-StandardTextualConventionsMIB
| Counter32 | |
| DisplayString | |
| Integer32 | |
| RowPointer | |
| RowStatus | |
| StorageType | |
| Unsigned32 |
From Nortel-Magellan-Passport-TextualConventionsMIB
| HexString | |
| NonReplicated |
From Nortel-Magellan-Passport-UsefulDefinitionsMIB
| passportMIBs | OBJECT-IDENTITY |
From Nortel-Magellan-Passport-VirtualRouterMIB
| vrIndex | OBJECT-TYPE |
| vrPpIndex | OBJECT-TYPE |
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| IpAddress |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| vrPpIpPortLogicalIfNhrpIf | 1.3.6.1.4.1.562.2.4.1.100.3.5.2.4 | |||
| vrPpIpPortLogicalIfNhrpIfRowStatusTable | 1.3.6.1.4.1.562.2.4.1.100.3.5.2.4.1 | not-accessible | This entry controls the addition and deletion of vrPpIpPortLogicalIfNhrpIf components. | |
| vrPpIpPortLogicalIfNhrpIfRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.100.3.5.2.4.1.1 | not-accessible | A single entry in the table represents a single vrPpIpPortLogicalIfNhrpIf component. | |
| ROW vrPpIpPortLogicalIfNhrpIfRowStatus | 1.3.6.1.4.1.562.2.4.1.100.3.5.2.4.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of vrPpIpPortLogicalIfNhrpIf components. These components can be added and deleted. |
| STR vrPpIpPortLogicalIfNhrpIfComponentName | 1.3.6.1.4.1.562.2.4.1.100.3.5.2.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO vrPpIpPortLogicalIfNhrpIfStorageType | 1.3.6.1.4.1.562.2.4.1.100.3.5.2.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the vrPpIpPortLogicalIfNhrpIf tables. |
| NON vrPpIpPortLogicalIfNhrpIfIndex | 1.3.6.1.4.1.562.2.4.1.100.3.5.2.4.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the vrPpIpPortLogicalIfNhrpIf tables. |
| vrIpNhrp | 1.3.6.1.4.1.562.2.4.1.100.6.19 | |||
| vrIpNhrpRowStatusTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.1 | not-accessible | This entry controls the addition and deletion of vrIpNhrp components. | |
| vrIpNhrpRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.1.1 | not-accessible | A single entry in the table represents a single vrIpNhrp component. | |
| ROW vrIpNhrpRowStatus | 1.3.6.1.4.1.562.2.4.1.100.6.19.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of vrIpNhrp components. These components can be added and deleted. |
| STR vrIpNhrpComponentName | 1.3.6.1.4.1.562.2.4.1.100.6.19.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO vrIpNhrpStorageType | 1.3.6.1.4.1.562.2.4.1.100.6.19.1.1.4 | StorageType | read-only | This variable represents the storage type value for the vrIpNhrp tables. |
| NON vrIpNhrpIndex | 1.3.6.1.4.1.562.2.4.1.100.6.19.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the vrIpNhrp tables. |
| vrIpNhrpNhs | 1.3.6.1.4.1.562.2.4.1.100.6.19.2 | |||
| vrIpNhrpNhsRowStatusTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.1 | not-accessible | This entry controls the addition and deletion of vrIpNhrpNhs components. | |
| vrIpNhrpNhsRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.1.1 | not-accessible | A single entry in the table represents a single vrIpNhrpNhs component. | |
| ROW vrIpNhrpNhsRowStatus | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of vrIpNhrpNhs components. These components cannot be added nor deleted. |
| STR vrIpNhrpNhsComponentName | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO vrIpNhrpNhsStorageType | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the vrIpNhrpNhs tables. |
| NON vrIpNhrpNhsIndex | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the vrIpNhrpNhs tables. |
| vrIpNhrpNhsEp | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2 | |||
| vrIpNhrpNhsEpRowStatusTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.1 | not-accessible | This entry controls the addition and deletion of vrIpNhrpNhsEp components. | |
| vrIpNhrpNhsEpRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.1.1 | not-accessible | A single entry in the table represents a single vrIpNhrpNhsEp component. | |
| ROW vrIpNhrpNhsEpRowStatus | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of vrIpNhrpNhsEp components. These components can be added and deleted. |
| STR vrIpNhrpNhsEpComponentName | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO vrIpNhrpNhsEpStorageType | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the vrIpNhrpNhsEp tables. |
| I32 vrIpNhrpNhsEpIndex | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the vrIpNhrpNhsEp tables. |
| vrIpNhrpNhsEpNetAddr | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2 | |||
| vrIpNhrpNhsEpNetAddrRowStatusTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.1 | not-accessible | This entry controls the addition and deletion of vrIpNhrpNhsEpNetAddr components. | |
| vrIpNhrpNhsEpNetAddrRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.1.1 | not-accessible | A single entry in the table represents a single vrIpNhrpNhsEpNetAddr component. | |
| ROW vrIpNhrpNhsEpNetAddrRowStatus | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.1.1.1 | RowStatus | read-write | This variable is used as the basis for SNMP naming of vrIpNhrpNhsEpNetAddr components. These components can be added and deleted. |
| STR vrIpNhrpNhsEpNetAddrComponentName | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO vrIpNhrpNhsEpNetAddrStorageType | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.1.1.4 | StorageType | read-only | This variable represents the storage type value for the vrIpNhrpNhsEpNetAddr tables. |
| I32 vrIpNhrpNhsEpNetAddrIndex | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.1.1.10 | Integer32 | not-accessible | This variable represents the index for the vrIpNhrpNhsEpNetAddr tables. |
| vrIpNhrpNhsEpNetAddrProvTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.10 | not-accessible | This group contains the provisionable attributes of the NetworkAddress component. | |
| vrIpNhrpNhsEpNetAddrProvEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.10.1 | not-accessible | An entry in the vrIpNhrpNhsEpNetAddrProvTable. | |
| IP vrIpNhrpNhsEpNetAddrSourceAddress | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.10.1.1 | IpAddress | read-write | This attribute specifies the internetwork address of the source. This is used to match a source internetwork address in an NHRP Resolution Request. |
| IP vrIpNhrpNhsEpNetAddrSourceMask | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.10.1.2 | IpAddress | read-write | This attribute specifies the netmask for the source internetwork address. |
| IP vrIpNhrpNhsEpNetAddrDestinationAddress | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.10.1.3 | IpAddress | read-write | This attribute specifies the internetwork address of the destination. This is used to match a destination internetwork address in an NHRP Resolution Request. |
| IP vrIpNhrpNhsEpNetAddrDestinationMask | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.2.10.1.4 | IpAddress | read-write | This attribute specifies the netmask for the destination internetwork address. |
| vrIpNhrpNhsEpProvTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.10 | not-accessible | This group contains the provisionable attributes of the EgressPolicy component. | |
| vrIpNhrpNhsEpProvEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.10.1 | not-accessible | An entry in the vrIpNhrpNhsEpProvTable. | |
| INT vrIpNhrpNhsEpAction | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.10.1.1 | INTEGER | read-write | This attribute specifies how the server should handle the NHRP Resolution Request if it matches this policy. The possible actions are: ack - Send a positive acknowledgement (ACK Reply) for the request. nak - Send a negative acknowledgement (NAK Reply) for the request. |
| INT vrIpNhrpNhsEpProtocol | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.2.10.1.2 | INTEGER | read-write | This attribute species the reachability type (that is, protocol) of the destination in the NHRP Resolution Request. The possible protocols: default - This value is a 'wildcard' and matches any protocol. A policy with a 'wildcard' protocol is less preferred than a policy with a protocol which matches exactly. staticLocal - The destination is on a locally attached network. |
| vrIpNhrpNhsStatsTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10 | not-accessible | This group contains the statistics attributes of the Nhs component. | |
| vrIpNhrpNhsStatsEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1 | not-accessible | An entry in the vrIpNhrpNhsStatsTable. | |
| C32 vrIpNhrpNhsRxResolveReq | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.1 | Counter32 | read-only | This attribute counts the NHRP Resolution Requests received by this server. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxResolveReplyAck | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.2 | Counter32 | read-only | This attribute counts the positively acknowledged NHRP Resolution Replies transmitted by this server. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxResolveReplyNakProhibited | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.3 | Counter32 | read-only | This attribute counts the NAK NHRP Resolution Replies transmitted by this server with the code 'Administratively Prohibited'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxResolveReplyNakInsufResources | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.4 | Counter32 | read-only | This attribute counts the NAK NHRP Resolution Replies transmitted by this server with the code 'Insufficient Resources'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxResolveReplyNakNoBinding | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.5 | Counter32 | read-only | This attribute counts the NAK NHRP Resolution Replies transmitted by this server with the code 'No Internetworking Layer Address to NBMA Address Binding Exists'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxResolveReplyNakNotUnique | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.6 | Counter32 | read-only | This attribute counts the NAK NHRP Resolution Replies transmitted by this server with the code 'Binding Exists But Is Not Unique'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxRegisterReq | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.7 | Counter32 | read-only | This attribute counts the NHRP Registration Requests received by this server. Registration is not supported, therefore all NHRP Registration Requests are silently dropped. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxPurgeReq | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.12 | Counter32 | read-only | This attribute counts the NHRP Purge Requests received by this server. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxPurgeReq | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.13 | Counter32 | read-only | This attribute counts the NHRP Purge Requests transmitted by this server. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxPurgeReply | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.14 | Counter32 | read-only | This attribute counts the NHRP Purge Replies received by this server. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxPurgeReply | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.15 | Counter32 | read-only | This attribute counts the NHRP Purge Replies transmitted by this server. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxErrUnrecognizedExtension | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.16 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this server with the error code 'Unrecognized Extension'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxErrLoopDetected | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.17 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this server with the error code 'NHRP Loop Detected'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxErrProtoAddrUnreachable | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.18 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this server with the error code 'Protocol Address Unreachable'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxErrProtoError | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.19 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this server with the error code 'Protocol Error'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxErrSduSizeExceeded | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.20 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this server with the error code 'NHRP SDU Size Exceeded'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxErrInvalidExtension | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.21 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this server with the error code 'Invalid Extension'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxErrInvalidResReplyReceived | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.22 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this server with the error code 'Invalid Resolution Reply Received'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxErrAuthenticationFailure | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.23 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this server with the error code 'Authentication Failure'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsRxErrHopCountExceeded | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.24 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this server with the error code 'Hop Count Exceeded'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxErrUnrecognizedExtension | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.25 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets transmitted by this server with the error code 'Unrecognized Extension'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxErrLoopDetected | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.26 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets transmitted by this server with the error code 'NHRP Loop Detected'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxErrProtoAddrUnreachable | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.27 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets transmitted by this server with the error code 'Protocol Address Unreachable'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxErrProtoError | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.28 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets transmitted by this server with the error code 'Protocol Error'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxErrSduSizeExceeded | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.29 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets transmitted by this server with the error code 'NHRP SDU Size Exceeded'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxErrInvalidExtension | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.30 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets transmitted by this server with the error code 'Invalid Extension'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxErrAuthenticationFailure | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.31 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets transmitted by this server with the error code 'Authentication Failure'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsTxErrHopCountExceeded | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.32 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets transmitted by this server with the error code 'Hop Count Exceeded'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsFwdResolveReq | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.33 | Counter32 | read-only | This attribute counts the NHRP Resolution Requests forwarded by this server acting as a transit NHS. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsFwdResolveReply | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.34 | Counter32 | read-only | This attribute counts the NHRP Resolution Replies forwarded by this server acting as a transit NHS. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsFwdRegisterReq | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.35 | Counter32 | read-only | This attribute counts the NHRP Registration Requests forwarded by this server acting as a transit NHS. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsFwdRegisterReply | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.36 | Counter32 | read-only | This attribute counts the NHRP Registration Replies forwarded by this server acting as a transit NHS. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsFwdPurgeReq | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.37 | Counter32 | read-only | This attribute counts the NHRP Purge Requests forwarded by this server acting as a transit NHS. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsFwdPurgeReply | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.38 | Counter32 | read-only | This attribute counts the NHRP Purge Replies forwarded by this server acting as a transit NHS. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhsFwdErrorIndication | 1.3.6.1.4.1.562.2.4.1.100.6.19.2.10.1.39 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets forwarded by this server acting as a transit NHS. This counter wraps to zero when the maximum value is exceeded. |
| vrIpNhrpNhc | 1.3.6.1.4.1.562.2.4.1.100.6.19.3 | |||
| vrIpNhrpNhcRowStatusTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.1 | not-accessible | This entry controls the addition and deletion of vrIpNhrpNhc components. | |
| vrIpNhrpNhcRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.1.1 | not-accessible | A single entry in the table represents a single vrIpNhrpNhc component. | |
| ROW vrIpNhrpNhcRowStatus | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of vrIpNhrpNhc components. These components cannot be added nor deleted. |
| STR vrIpNhrpNhcComponentName | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO vrIpNhrpNhcStorageType | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.1.1.4 | StorageType | read-only | This variable represents the storage type value for the vrIpNhrpNhc tables. |
| NON vrIpNhrpNhcIndex | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.1.1.10 | NonReplicated | not-accessible | This variable represents the index for the vrIpNhrpNhc tables. |
| vrIpNhrpNhcProvTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.10 | not-accessible | This group contains the provisionable attributes of the Nhc component. | |
| vrIpNhrpNhcProvEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.10.1 | not-accessible | An entry in the vrIpNhrpNhcProvTable. | |
| U32 vrIpNhrpNhcFlowDetectPacketCount | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.10.1.1 | Unsigned32 | read-write | This attribute, along with flowDetectTimePeriod, specifies the IP traffic flow detection threshold; If the number of IP packets sent to a particular destination within the time interval specified by flowDetectTimePeriod exceeds the value specified by flowDetectPacketCount, then an NHRP Resolution Request will be triggerred. If successful, a shortcut will be set up. |
| INT vrIpNhrpNhcFlowDetectTimePeriod | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.10.1.2 | INTEGER | read-write | This attribute, along with flowDetectPacketCount, specifies the IP traffic flow detection threshold; If the number of IP packets sent to a particular destination within the time interval specified by flowDetectTimePeriod exceeds the value specified by flowDetectPacketCount, then an NHRP Resolution Request will be triggerred. If successful, a shortcut will be set up. |
| U32 vrIpNhrpNhcIdleDetectPacketCount | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.10.1.3 | Unsigned32 | read-write | This attribute, along with idleDetectTimePeriod, specifies the idle shortcut threshold; If the number of frames transmitted over an outgoing shortcut, or received over an incoming shortcut, within the time interval specified by idleDetectTimePeriod falls below the value specified by idleDetectPacketCount, then the shortcut connection will be released. |
| U32 vrIpNhrpNhcIdleDetectTimePeriod | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.10.1.4 | Unsigned32 | read-write | This attribute, along with idleDetectPacketCount, specifies the idle shortcut threshold; If the number of frames transmitted over an outgoing shortcut, or received over an incoming shortcut, within the time interval specified by idleDetectTimePeriod falls below the value specified by idleDetectPacketCount, then the shortcut connection will be released. |
| INT vrIpNhrpNhcAtmFlowDetection | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.10.1.5 | INTEGER | read-write | This attribute specifies whether flow detection should be performed for IP traffic received on ATM cards. This attribute does not apply to IP traffic received on LAN or non-ATM WAN cards. |
| vrIpNhrpNhcStatsTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11 | not-accessible | This group contains the statistics attributes of the Nhc component. | |
| vrIpNhrpNhcStatsEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1 | not-accessible | An entry in the vrIpNhrpNhcStatsTable. | |
| C32 vrIpNhrpNhcTxResolveReq | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.1 | Counter32 | read-only | This attribute counts the NHRP Resolution Requests transmitted by this client. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxResolveReplyAck | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.2 | Counter32 | read-only | This attribute counts the positively acknowledged NHRP Resolution Replies received by this client. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxResolveReplyNakProhibited | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.3 | Counter32 | read-only | This attribute counts the NAK NHRP Resolution Replies received by this client that contained the code indicating 'Administratively Prohibited'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxResolveReplyNakInsufResources | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.4 | Counter32 | read-only | This attribute counts the NAK NHRP Resolution Replies received by this client that contained the code indicating 'Insufficient Resources'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxResolveReplyNakNoBinding | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.5 | Counter32 | read-only | This attribute counts the NAK NHRP Resolution Replies received by this client that contained the code indicating 'No Internetworking Layer Address to NBMA Address Binding Exists'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxResolveReplyNakNotUnique | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.6 | Counter32 | read-only | This attribute counts the NAK NHRP Resolution Replies received by this client that contained the code indicating 'Binding Exists But Is Not Unique'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxPurgeReq | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.12 | Counter32 | read-only | This attribute counts the NHRP Purge Requests received by this client. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcTxPurgeReq | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.13 | Counter32 | read-only | This attribute counts the NHRP Purge Requests transmitted by this client. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxPurgeReply | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.14 | Counter32 | read-only | This attribute counts the NHRP Purge Replies received by this client. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcTxPurgeReply | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.15 | Counter32 | read-only | This attribute counts the NHRP Purge Replies transmitted by this client. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcTxErrIndication | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.16 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets transmitted by this client. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxErrUnrecognizedExtension | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.17 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this client with the error code 'Unrecognized Extension'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxErrLoopDetected | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.18 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this client with the error code 'NHRP Loop Detected'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxErrProtoAddrUnreachable | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.19 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this client with the error code 'Protocol Address Unreachable'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxErrProtoError | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.20 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this client with the error code 'Protocol Error'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxErrSduSizeExceeded | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.21 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this client with the error code 'NHRP SDU Size Exceeded'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxErrInvalidExtension | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.22 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this client with the error code 'Invalid Extension'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxErrAuthenticationFailure | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.23 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this client with the error code 'Authentication Failure'. This counter wraps to zero when the maximum value is exceeded. |
| C32 vrIpNhrpNhcRxErrHopCountExceeded | 1.3.6.1.4.1.562.2.4.1.100.6.19.3.11.1.24 | Counter32 | read-only | This attribute counts the NHRP Error Indication packets received by this client with the error code 'Hop Count Exceeded'. This counter wraps to zero when the maximum value is exceeded. |
| vrIpNhrpRce | 1.3.6.1.4.1.562.2.4.1.100.6.19.4 | |||
| vrIpNhrpRceRowStatusTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.1 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of vrIpNhrpRce components. | |
| vrIpNhrpRceRowStatusEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.1.1 | not-accessible | A single entry in the table represents a single vrIpNhrpRce component. | |
| ROW vrIpNhrpRceRowStatus | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.1.1.1 | RowStatus | read-only | This variable is used as the basis for SNMP naming of vrIpNhrpRce components. These components cannot be added nor deleted. |
| STR vrIpNhrpRceComponentName | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.1.1.2 | DisplayString | read-only | This variable provides the component's string name for use with the ASCII Console Interface |
| STO vrIpNhrpRceStorageType | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.1.1.4 | StorageType | read-only | This variable represents the storage type value for the vrIpNhrpRce tables. |
| IP vrIpNhrpRceDestAddrIndex | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.1.1.10 | IpAddress | not-accessible | This variable represents an index for the vrIpNhrpRce tables. |
| IP vrIpNhrpRceDestMaskIndex | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.1.1.11 | IpAddress | not-accessible | This variable represents an index for the vrIpNhrpRce tables. |
| vrIpNhrpRceOperTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.10 | not-accessible | *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the ResCacheEntry component. | |
| vrIpNhrpRceOperEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.10.1 | not-accessible | An entry in the vrIpNhrpRceOperTable. | |
| STR vrIpNhrpRceNbmaAddress | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.10.1.3 | HexString | read-only | This attribute indicates the NBMA subnetwork address of the next hop. |
| INT vrIpNhrpRceEntryState | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.10.1.6 | INTEGER | read-only | This attribute indicates the state of this resolution cache entry. The possible states are: incomplete - The client sent the resolution request and is waiting for a reply. ackReply - The client sent the resolution request and received an ACK reply. nakReply - The client sent the resolution request and received a NAK reply. This entry remains in the cache for 20 minutes thereby preventing subsequent requests during that time period. noReply - The client sent the resolution request but did not receive a reply. This entry remains in the cache for 20 minutes thereby preventing subsequent requests during that time period. localReply - The client sent the resolution request and received an ACK reply from a locally-attached responder. This entry remains in the cache for 20 minutes thereby preventing subsequent requests during that time period. |
| U32 vrIpNhrpRceHoldingTime | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.10.1.7 | Unsigned32 | read-only | This attribute indicates the number of seconds that this entry will remain in the resolution cache table. If the entry has not been refreshed before this time it will be removed from the cache. |
| NUM vrIpNhrpRceShortcut | 1.3.6.1.4.1.562.2.4.1.100.6.19.4.10.1.8 | RowPointer | read-only | This attribute indicates the component name of the shortcut connection associated with this resolution cache entry. If the component name is empty then no shortcut currently exists. |
| vrIpNhrpAdminControlTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.10 | not-accessible | This group includes the Administrative Control attribute. This attribute defines the current administrative state of this component. | |
| vrIpNhrpAdminControlEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.10.1 | not-accessible | An entry in the vrIpNhrpAdminControlTable. | |
| INT vrIpNhrpSnmpAdminStatus | 1.3.6.1.4.1.562.2.4.1.100.6.19.10.1.1 | INTEGER | read-write | The desired state of the interface. The up state indicates the interface is operational and packet forwarding is allowed. The down state indicates the interface is not operational and packet forwarding is unavailable. The testing state indicates that no operational packets can be passed. |
| vrIpNhrpProvTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.11 | not-accessible | This group contains the provisionable attributes of the Nhrp component. | |
| vrIpNhrpProvEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.11.1 | not-accessible | An entry in the vrIpNhrpProvTable. | |
| U32 vrIpNhrpMaxResCacheEntries | 1.3.6.1.4.1.562.2.4.1.100.6.19.11.1.1 | Unsigned32 | read-write | This attribute specifies the maximum number of ResCacheEntry components which may exist under the Nhrp component at any one time. Reducing the value of this attribute will not clear existing entries. |
| INT vrIpNhrpFwdTransitRecord | 1.3.6.1.4.1.562.2.4.1.100.6.19.11.1.2 | INTEGER | read-write | This attribute specifies whether to attach a forward transit record extension to NHRP packets (Resolution and Purge requests) that Passport originates. This extension along with NHRP debug tracing set to 'verbose' can be used in tracing the path the NHRP packet takes from source to destination. |
| INT vrIpNhrpRevTransitRecord | 1.3.6.1.4.1.562.2.4.1.100.6.19.11.1.3 | INTEGER | read-write | This attribute specifies whether to attach a reverse transit record extension to Resolution Request packets that Passport originates. This extension along with NHRP debug tracing set to 'verbose' can be used in tracing the path the NHRP packet takes from destination to source. |
| vrIpNhrpStateTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.13 | not-accessible | This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide. | |
| vrIpNhrpStateEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.13.1 | not-accessible | An entry in the vrIpNhrpStateTable. | |
| INT vrIpNhrpAdminState | 1.3.6.1.4.1.562.2.4.1.100.6.19.13.1.1 | INTEGER | read-only | This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. |
| INT vrIpNhrpOperationalState | 1.3.6.1.4.1.562.2.4.1.100.6.19.13.1.2 | INTEGER | read-only | This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. |
| INT vrIpNhrpUsageState | 1.3.6.1.4.1.562.2.4.1.100.6.19.13.1.3 | INTEGER | read-only | This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. |
| vrIpNhrpOperStatusTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.14 | not-accessible | This group includes the Operational Status attribute. This attribute defines the current operational state of this component. | |
| vrIpNhrpOperStatusEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.14.1 | not-accessible | An entry in the vrIpNhrpOperStatusTable. | |
| INT vrIpNhrpSnmpOperStatus | 1.3.6.1.4.1.562.2.4.1.100.6.19.14.1.1 | INTEGER | read-only | The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed. |
| vrIpNhrpOperTable | 1.3.6.1.4.1.562.2.4.1.100.6.19.15 | not-accessible | This group contains the operational attributes of the Nhrp component. | |
| vrIpNhrpOperEntry | 1.3.6.1.4.1.562.2.4.1.100.6.19.15.1 | not-accessible | An entry in the vrIpNhrpOperTable. | |
| U32 vrIpNhrpCurrResCacheEntries | 1.3.6.1.4.1.562.2.4.1.100.6.19.15.1.1 | Unsigned32 | read-only | This attribute indicates the current number of entries in the NHRP resolution cache table. |
| U32 vrIpNhrpPeakResCacheEntries | 1.3.6.1.4.1.562.2.4.1.100.6.19.15.1.2 | Unsigned32 | read-only | This attribute indicates the peak value of currResCacheEntries since the Nhrp snmpOperStatus attribute last became up. |
| ipNhrpMIB | 1.3.6.1.4.1.562.2.4.2.77 | |||
| ipNhrpGroup | 1.3.6.1.4.1.562.2.4.2.77.1 | |||
| ipNhrpGroupBE | 1.3.6.1.4.1.562.2.4.2.77.1.5 | |||
| ipNhrpGroupBE01 | 1.3.6.1.4.1.562.2.4.2.77.1.5.2 | |||
| ipNhrpGroupBE01A | 1.3.6.1.4.1.562.2.4.2.77.1.5.2.2 | |||
| ipNhrpCapabilities | 1.3.6.1.4.1.562.2.4.2.77.3 | |||
| ipNhrpCapabilitiesBE | 1.3.6.1.4.1.562.2.4.2.77.3.5 | |||
| ipNhrpCapabilitiesBE01 | 1.3.6.1.4.1.562.2.4.2.77.3.5.2 | |||
| ipNhrpCapabilitiesBE01A | 1.3.6.1.4.1.562.2.4.2.77.3.5.2.2 |
RFC description
Configures and monitors NHRP (Next Hop Resolution Protocol) on Nortel Magellan Passport virtual routers and IP ports.
Start monitoring Nortel Magellan Passport multiservice WAN switch/router (NHRP over ATM/NBMA) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.