TELDAT-TRAP-SNMP-MIB

All MIBs › TELDAT-TRAP-SNMP-MIB

Organization: Teldat, S.A.

Last Updated: 2014-01-20

Category: Teldat Router Management, Teldat Trap Notifications

Description: Defines Teldat router SNMP agent event trap notifications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELDAT-TRAP-SNMP-MIB?

TELDAT-TRAP-SNMP-MIB is a Teldat enterprise MIB module defining SNMP notifications emitted by the router's own SNMP agent event subsystem. It carries no configuration or performance tables; its objects are all trap variable bindings describing the source/destination SNMP addresses, protocol version, community string, application type, error code, and username involved in an SNMP transaction event. This makes it valuable for monitoring the health and security posture of the management plane itself, such as detecting authentication failures, unexpected SNMP versions, or unauthorized access attempts against the device's agent. It relies on the standard SNMPv2 notification framework and complements the base SNMPv2-MIB by adding Teldat-specific event detail. It is typically deployed in security-conscious network operations centers that want visibility into who is polling or configuring their Teldat routers via SNMP. Network engineers evaluating or troubleshooting this functionality can download the TELDAT-TRAP-SNMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-TRAP-SNMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teldat router (SNMP agent subsystem)

Monitoring Examples

Traps such as snmp3 (carrying snmp3_source_snmp_address and snmp3_error_code) or snmp5 (carrying snmp5_community and snmp5_source_snmp_address) let an operator see exactly which management station triggered an SNMP error or used a particular community string. An snmp8 trap exposing snmp8_userName alongside snmp8_source_snmp_address would reveal SNMPv3 user-based access attempts, useful for auditing which credentials are being used against the agent. Because this is a pure notification MIB, there is no ongoing counter table to poll; monitoring is limited to these discrete event traps.

What Can Be Monitored

source/destination SNMP address of an event
SNMP error code
SNMP protocol version used
community string used
SNMPv3 username used

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From TELDAT-MIB

telEventTraps

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
snmpTrapsMIB	1.3.6.1.4.1.2007.1.4.21			This Module Information Base file is defined for managing received SNMP notifications generated by the SNMP event subsystem.
snmpEventsGroup	1.3.6.1.4.1.2007.1.4.21.1
snmpEventObjects1	1.3.6.1.4.1.2007.1.4.21.1.1			Event SNMP.1 This message is generated dor each SNMP packet received from a remote host.
IP snmp1SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.1.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.1
snmpEventObjects2	1.3.6.1.4.1.2007.1.4.21.1.2			Event SNMP.2 This message is generated for each SNMP packet sent to a remote host.
IP snmp2DestinationSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.2.1	IpAddress	accessible-for-notify	Parameter 'destinationSnmpAddress' in event SNMP.2
snmpEventObjects3	1.3.6.1.4.1.2007.1.4.21.1.3			Event SNMP.3 This message is generated by a first-level reasonableness check of an incomming SNMP packet. The error codes have the following meanings: 1 - packet does not begin with SEQUENCE (0x30) 2 - packet sequence length too small 3 - packet sequence length improperly encoded (in one byte) 4 - first packet field not an ASN.1 INTEGER 5 - packet sequence length improperly encoded (in two bytes) 6 - first packet field not an ASN.1 INTEGER 7 - some other error was detected
IP snmp3SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.3.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.3
I32 snmp3ErrorCode	1.3.6.1.4.1.2007.1.4.21.1.3.2	Integer32	accessible-for-notify	Parameter 'errorCode' in event SNMP.3
snmpEventObjects4	1.3.6.1.4.1.2007.1.4.21.1.4			Event SNMP.4 This message indicates that an SNMP packet contained an incorrect version.
I32 snmp4VersionNumber	1.3.6.1.4.1.2007.1.4.21.1.4.1	Integer32	accessible-for-notify	Parameter 'versionNumber' in event SNMP.4
IP snmp4SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.4.2	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.4
snmpEventObjects5	1.3.6.1.4.1.2007.1.4.21.1.5			Event SNMP.5 This message indicates that an SNMP request from a remote host specified a community which did not list that host's IP sddress as acceptable.
STR snmp5Community	1.3.6.1.4.1.2007.1.4.21.1.5.1	DisplayString	accessible-for-notify	Parameter 'community' in event SNMP.5
IP snmp5SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.5.2	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.5
snmpEventObjects6	1.3.6.1.4.1.2007.1.4.21.1.6			Event SNMP.6 This message indicates that an SNMP packet had a bad application type. That is, it was not a GET, GETNEXT, GETBULK or SET request.
I32 snmp6ApplType	1.3.6.1.4.1.2007.1.4.21.1.6.1	Integer32	accessible-for-notify	Parameter 'applType' in event SNMP.6
IP snmp6SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.6.2	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.6
snmpEventObjects8	1.3.6.1.4.1.2007.1.4.21.1.8			Event SNMP.8 This message indicates that a SET request came in on a community or userName which only provides read-only access to the MIB.
IP snmp8SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.8.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.8
STR snmp8UserName	1.3.6.1.4.1.2007.1.4.21.1.8.2	DisplayString	accessible-for-notify	Parameter 'userName' in event SNMP.8
snmpEventObjects10	1.3.6.1.4.1.2007.1.4.21.1.10			Event SNMP.10 This message is generated by the SNMP fake-oute routine.
IP snmp10SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.10.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.10
snmpEventObjects11	1.3.6.1.4.1.2007.1.4.21.1.11			Event SNMP.11 This message is generated by a length check on the variable to be sent out.
I32 snmp11Ovarlen	1.3.6.1.4.1.2007.1.4.21.1.11.1	Integer32	accessible-for-notify	Parameter 'ovarlen' in event SNMP.11
IP snmp11SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.11.2	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.11
snmpEventObjects12	1.3.6.1.4.1.2007.1.4.21.1.12			Event SNMP.12 This message is generated for each SNMP packet received from a remote host of the type get-request.
IP snmp12SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.12.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.12
snmpEventObjects13	1.3.6.1.4.1.2007.1.4.21.1.13			Event SNMP.13 This message is generated for each SNMP packet received from a remote host of the type get-next.
IP snmp13SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.13.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.13
snmpEventObjects14	1.3.6.1.4.1.2007.1.4.21.1.14			Event SNMP.14 This message is generated for each SNMP packet received from a remote host of the type set-request.
IP snmp14SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.14.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.14
snmpEventObjects15	1.3.6.1.4.1.2007.1.4.21.1.15			Event SNMP.15 This message indicate that a packet was sent out with the error status as too big as a result of the SNMP variable in question not fitting the packet size.
IP snmp15SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.15.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.15
snmpEventObjects16	1.3.6.1.4.1.2007.1.4.21.1.16			Event SNMP.16 This message indicate that a packet was sent out with the error status as noSuchName as a result of the SNMP variable in question not existing in the gateway or not in the view associated with the specified community or the operation is a set on a read-only variable.
IP snmp16SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.16.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.16
snmpEventObjects17	1.3.6.1.4.1.2007.1.4.21.1.17			Event SNMP.17 This message indicate that a packet was sent out with the error status as badvalue as a result of trying to set a variable with a wrong value specified in the SET request.
IP snmp17SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.17.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.17
snmpEventObjects22	1.3.6.1.4.1.2007.1.4.21.1.22			Event SNMP.22 One trap will not be sent because it could not be built for some reason.
I32 snmp22Type	1.3.6.1.4.1.2007.1.4.21.1.22.1	Integer32	accessible-for-notify	Parameter 'type' in event SNMP.22
I32 snmp22Subtype	1.3.6.1.4.1.2007.1.4.21.1.22.2	Integer32	accessible-for-notify	Parameter 'subtype' in event SNMP.22
STR snmp22Event	1.3.6.1.4.1.2007.1.4.21.1.22.3	DisplayString	accessible-for-notify	Parameter 'event' in event SNMP.22
snmpEventObjects23	1.3.6.1.4.1.2007.1.4.21.1.23			Event SNMP.23 One trap could not be built because its total length in ASN.1 is greater than the maximun value allowed.
I32 snmp23Type	1.3.6.1.4.1.2007.1.4.21.1.23.1	Integer32	accessible-for-notify	Parameter 'type' in event SNMP.23
I32 snmp23Subtype	1.3.6.1.4.1.2007.1.4.21.1.23.2	Integer32	accessible-for-notify	Parameter 'subtype' in event SNMP.23
STR snmp23Event	1.3.6.1.4.1.2007.1.4.21.1.23.3	DisplayString	accessible-for-notify	Parameter 'event' in event SNMP.23
I32 snmp23Length	1.3.6.1.4.1.2007.1.4.21.1.23.4	Integer32	accessible-for-notify	Parameter 'length' in event SNMP.23
I32 snmp23MaxLengh	1.3.6.1.4.1.2007.1.4.21.1.23.5	Integer32	accessible-for-notify	Parameter 'maxLengh' in event SNMP.23
snmpEventObjects24	1.3.6.1.4.1.2007.1.4.21.1.24			Event SNMP.24 One trap could not be built because the length in ASN.1 of one of its parameters (at least) is greater than the maximum value allowed.
I32 snmp24ParameterNumber	1.3.6.1.4.1.2007.1.4.21.1.24.1	Integer32	accessible-for-notify	Parameter 'parameterNumber' in event SNMP.24
I32 snmp24Length	1.3.6.1.4.1.2007.1.4.21.1.24.2	Integer32	accessible-for-notify	Parameter 'length' in event SNMP.24
I32 snmp24MaxLength	1.3.6.1.4.1.2007.1.4.21.1.24.3	Integer32	accessible-for-notify	Parameter 'maxLength' in event SNMP.24
snmpEventObjects25	1.3.6.1.4.1.2007.1.4.21.1.25			Event SNMP.25 One trap could not be built because the number of parameters is greater than the maximum allowed.
I32 snmp25MaxParameters	1.3.6.1.4.1.2007.1.4.21.1.25.1	Integer32	accessible-for-notify	Parameter 'maxParameters' in event SNMP.25
snmpEventObjects26	1.3.6.1.4.1.2007.1.4.21.1.26			Event SNMP.26 This message is generated for each OID included in a get-request, get-next-request, get-bulk or set-request PDU.
STR snmp26Operation	1.3.6.1.4.1.2007.1.4.21.1.26.1	DisplayString	accessible-for-notify	Parameter 'operation' in event SNMP.26
STR snmp26Oid	1.3.6.1.4.1.2007.1.4.21.1.26.2	DisplayString	accessible-for-notify	Parameter 'oid' in event SNMP.26
snmpEventObjects27	1.3.6.1.4.1.2007.1.4.21.1.27			Event SNMP.27 An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated.
STR snmp27SecName	1.3.6.1.4.1.2007.1.4.21.1.27.1	DisplayString	accessible-for-notify	Parameter 'secName' in event SNMP.27
I32 snmp27Version	1.3.6.1.4.1.2007.1.4.21.1.27.2	Integer32	accessible-for-notify	Parameter 'version' in event SNMP.27
IP snmp27SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.27.3	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.27
snmpEventObjects28	1.3.6.1.4.1.2007.1.4.21.1.28			Event SNMP.28 Generic informational event.
STR snmp28String	1.3.6.1.4.1.2007.1.4.21.1.28.1	DisplayString	accessible-for-notify	Parameter 'string' in event SNMP.28
snmpEventObjects29	1.3.6.1.4.1.2007.1.4.21.1.29			Event SNMP.29 This message is generated for each SNMP packet received from a remote host of the type get-bulk.
IP snmp29SourceSnmpAddress	1.3.6.1.4.1.2007.1.4.21.1.29.1	IpAddress	accessible-for-notify	Parameter 'sourceSnmpAddress' in event SNMP.29
snmpNotifications	1.3.6.1.4.1.2007.1.4.21.2
snmpNotificationsPrefix	1.3.6.1.4.1.2007.1.4.21.2.0
NTF snmpNotification1	1.3.6.1.4.1.2007.1.4.21.2.0.1			Notification of Event SNMP.1 Message: 'received packet from host $1' Parameters list: $1: snmp1SourceSnmpAddress This message is generated dor each SNMP packet received from a remote host.
NTF snmpNotification2	1.3.6.1.4.1.2007.1.4.21.2.0.2			Notification of Event SNMP.2 Message: 'sent packet to host $1' Parameters list: $1: snmp2DestinationSnmpAddress This message is generated for each SNMP packet sent to a remote host.
NTF snmpNotification3	1.3.6.1.4.1.2007.1.4.21.2.0.3			Notification of Event SNMP.3 Message: 'received bad SNMP pcket from host $1 (error code = $2)' Parameters list: $1: snmp3SourceSnmpAddress $2: snmp3ErrorCode This message is generated by a first-level reasonableness check of an incomming SNMP packet. The error codes have the following meanings: 1 - packet does not begin with SEQUENCE (0x30) 2 - packet sequence length too small 3 - packet sequence length improperly encoded (in one byte) 4 - first packet field not an ASN.1 INTEGER 5 - packet sequence length improperly encoded (in two bytes) 6 - first packet field not an ASN.1 INTEGER 7 - some other error was detected
NTF snmpNotification4	1.3.6.1.4.1.2007.1.4.21.2.0.4			Notification of Event SNMP.4 Message: 'bad version number $1 from host $2' Parameters list: $1: snmp4VersionNumber $2: snmp4SourceSnmpAddress This message indicates that an SNMP packet contained an incorrect version.
NTF snmpNotification5	1.3.6.1.4.1.2007.1.4.21.2.0.5			Notification of Event SNMP.5 Message: 'no access to community $1 from host $2' Parameters list: $1: snmp5Community $2: snmp5SourceSnmpAddress This message indicates that an SNMP request from a remote host specified a community which did not list that host's IP sddress as acceptable.
NTF snmpNotification6	1.3.6.1.4.1.2007.1.4.21.2.0.6			Notification of Event SNMP.6 Message: 'bad application type $1 from host $2' Parameters list: $1: snmp6ApplType $2: snmp6SourceSnmpAddress This message indicates that an SNMP packet had a bad application type. That is, it was not a GET, GETNEXT, GETBULK or SET request.
NTF snmpNotification7	1.3.6.1.4.1.2007.1.4.21.2.0.7			Notification of Event SNMP.7 Message: 'no free packet buffer available' This message is generated when SNMP cannot allocate a packet in which to construct an SNMP response.
NTF snmpNotification8	1.3.6.1.4.1.2007.1.4.21.2.0.8			Notification of Event SNMP.8 Message: 'SET request from host $1 has read-only access in userName $2' Parameters list: $1: snmp8SourceSnmpAddress $2: snmp8UserName This message indicates that a SET request came in on a community or userName which only provides read-only access to the MIB.
NTF snmpNotification9	1.3.6.1.4.1.2007.1.4.21.2.0.9			Notification of Event SNMP.9 Message: 'TRAP: no free packet buffer available' This message is generated whenever SNMP cannot send an event because it cannot allocate storage.
NTF snmpNotification10	1.3.6.1.4.1.2007.1.4.21.2.0.10			Notification of Event SNMP.10 Message: 'SNMP disabled packet discarded from host $1' Parameters list: $1: snmp10SourceSnmpAddress This message is generated by the SNMP fake-oute routine.
NTF snmpNotification11	1.3.6.1.4.1.2007.1.4.21.2.0.11			Notification of Event SNMP.11 Message: 'length of variable to be sent out exceeds max length $1 from host $2' Parameters list: $1: snmp11Ovarlen $2: snmp11SourceSnmpAddress This message is generated by a length check on the variable to be sent out.
NTF snmpNotification12	1.3.6.1.4.1.2007.1.4.21.2.0.12			Notification of Event SNMP.12 Message: 'received a get-request packet from host $1' Parameters list: $1: snmp12SourceSnmpAddress This message is generated for each SNMP packet received from a remote host of the type get-request.
NTF snmpNotification13	1.3.6.1.4.1.2007.1.4.21.2.0.13			Notification of Event SNMP.13 Message: 'received a get-next packet from host $1' Parameters list: $1: snmp13SourceSnmpAddress This message is generated for each SNMP packet received from a remote host of the type get-next.
NTF snmpNotification14	1.3.6.1.4.1.2007.1.4.21.2.0.14			Notification of Event SNMP.14 Message: 'received a set-request packet from host $1' Parameters list: $1: snmp14SourceSnmpAddress This message is generated for each SNMP packet received from a remote host of the type set-request.
NTF snmpNotification15	1.3.6.1.4.1.2007.1.4.21.2.0.15			Notification of Event SNMP.15 Message: 'packet from host $1 resulted in a pakt with error status: toobig' Parameters list: $1: snmp15SourceSnmpAddress This message indicate that a packet was sent out with the error status as too big as a result of the SNMP variable in question not fitting the packet size.
NTF snmpNotification16	1.3.6.1.4.1.2007.1.4.21.2.0.16			Notification of Event SNMP.16 Message: 'packet from host $1 resulted in a packet with error status: nosuchnam' Parameters list: $1: snmp16SourceSnmpAddress This message indicate that a packet was sent out with the error status as noSuchName as a result of the SNMP variable in question not existing in the gateway or not in the view associated with the specified community or the operation is a set on a read-only variable.
NTF snmpNotification17	1.3.6.1.4.1.2007.1.4.21.2.0.17			Notification of Event SNMP.17 Message: 'packet from host $1 resulted in a packet with error status: badvalue' Parameters list: $1: snmp17SourceSnmpAddress This message indicate that a packet was sent out with the error status as badvalue as a result of trying to set a variable with a wrong value specified in the SET request.
NTF snmpNotification18	1.3.6.1.4.1.2007.1.4.21.2.0.18			Notification of Event SNMP.18 Message: 'Snmp traps buffer full' Snmp traps buffer is full.
NTF snmpNotification19	1.3.6.1.4.1.2007.1.4.21.2.0.19			Notification of Event SNMP.19 Message: 'Previous trap not transmitted' It isn't allowed to allocate more memory if the previous trap wasn't transmitted successfully.
NTF snmpNotification20	1.3.6.1.4.1.2007.1.4.21.2.0.20			Notification of Event SNMP.20 Message: 'There are no parameters stored to be sent inside the trap' The trap is empty, without parameters.
NTF snmpNotification21	1.3.6.1.4.1.2007.1.4.21.2.0.21			Notification of Event SNMP.21 Message: 'No memory was allocated to store the value pointed by use' The trap is empty, without parameters.
NTF snmpNotification22	1.3.6.1.4.1.2007.1.4.21.2.0.22			Notification of Event SNMP.22 Message: 'Snmp trap type $1 subtype $2 $3 could not be built' Parameters list: $1: snmp22Type $2: snmp22Subtype $3: snmp22Event One trap will not be sent because it could not be built for some reason.
NTF snmpNotification23	1.3.6.1.4.1.2007.1.4.21.2.0.23			Notification of Event SNMP.23 Message: 'The lenght of the snmp trap type $1 subtype $2 $3 (in ASN.1) is greater than the maximum allowed (length: $4, max: $5)' Parameters list: $1: snmp23Type $2: snmp23Subtype $3: snmp23Event $4: snmp23Length $5: snmp23MaxLengh One trap could not be built because its total length in ASN.1 is greater than the maximun value allowed.
NTF snmpNotification24	1.3.6.1.4.1.2007.1.4.21.2.0.24			Notification of Event SNMP.24 Message: 'Parameter $1 in Snmp trap too long (length: $2, max: $3)' Parameters list: $1: snmp24ParameterNumber $2: snmp24Length $3: snmp24MaxLength One trap could not be built because the length in ASN.1 of one of its parameters (at least) is greater than the maximum value allowed.
NTF snmpNotification25	1.3.6.1.4.1.2007.1.4.21.2.0.25			Notification of Event SNMP.25 Message: 'Snmp trap has too many parameters (max: $1)' Parameters list: $1: snmp25MaxParameters One trap could not be built because the number of parameters is greater than the maximum allowed.
NTF snmpNotification26	1.3.6.1.4.1.2007.1.4.21.2.0.26			Notification of Event SNMP.26 Message: '$1: OID = $2' Parameters list: $1: snmp26Operation $2: snmp26Oid This message is generated for each OID included in a get-request, get-next-request, get-bulk or set-request PDU.
NTF snmpNotification27	1.3.6.1.4.1.2007.1.4.21.2.0.27			Notification of Event SNMP.27 Message: 'authentication failure for secName $1, version $2 from host $3' Parameters list: $1: snmp27SecName $2: snmp27Version $3: snmp27SourceSnmpAddress An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated.
NTF snmpNotification28	1.3.6.1.4.1.2007.1.4.21.2.0.28			Notification of Event SNMP.28 Message: '$1' Parameters list: $1: snmp28String Generic informational event.
NTF snmpNotification29	1.3.6.1.4.1.2007.1.4.21.2.0.29			Notification of Event SNMP.29 Message: 'received a get-bulk packet from host $1' Parameters list: $1: snmp29SourceSnmpAddress This message is generated for each SNMP packet received from a remote host of the type get-bulk.

RFC description

Manages SNMP notifications and events generated by the SNMP event subsystem. Tracks incoming and outgoing SNMP packets and associated traps and alarms.

Start monitoring Teldat router, SNMP agent subsystem (agent authentication/access event traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELDAT-TRAP-SNMP-MIB

What Is TELDAT-TRAP-SNMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description