TELDAT-MON-INTERF-CELLULAR-MIB

All MIBs › TELDAT-MON-INTERF-CELLULAR-MIB

Category: Teldat Router Management, Wireless and Cellular Networking

Description: Monitors Teldat router cellular interface connection status, signal quality, and data throughput counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELDAT-MON-INTERF-CELLULAR-MIB?

TELDAT-MON-INTERF-CELLULAR-MIB is a Teldat enterprise MIB for monitoring cellular WAN interfaces on Teldat routers, covering both static module information and dynamic connection state. It exposes an interface info table with cellular module manufacturer, model, firmware version, IMEI, IMSI, and SIM ID/ICC identifiers, plus a separate state table tracking live cellular connection status, signal quality, and data throughput counters. Its monitoring emphasis is hardware and connectivity status of the embedded cellular modem: administrators can verify the cellular module's firmware version and SIM identity for asset and provisioning audits, and monitor live connection state and signal quality to detect a cellular link that has dropped, degraded, or is roaming unexpectedly, which is critical for routers relying on cellular as a primary or backup WAN link. As a Teldat-specific module it complements standard IF-MIB interface counters for the same cellular interface rather than replacing them. It is deployed on Teldat routers equipped with cellular (3G/4G/5G) WAN modules used for primary rural connectivity or as failover backup links, and administrators can download the TELDAT-MON-INTERF-CELLULAR-MIB file to load into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-MON-INTERF-CELLULAR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teldat router with cellular WAN module

Monitoring Examples

An administrator would poll teldatCellularInfoInterfaceTable for a given teldatCellularInfoInterfaceIndex to check teldatCellularInfoInterfaceModuleFirmware, teldatCellularInfoInterfaceModuleIMEI, and teldatCellularInfoInterfaceSIMIcc for module and SIM identification. The companion teldatCellularStateInterfaceTable would be polled for live connection and signal-quality data; a degraded signal reading combined with a connection-state change would reveal the cellular backup link is unstable, prompting a check of antenna placement or carrier coverage. teldatCellularStatObject would provide the broader statistics context for throughput on that interface.

What Can Be Monitored

cellular module firmware version
IMEI/IMSI/SIM identifiers
cellular connection state
signal quality
data throughput counters

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1213-MIB

DisplayString

From TELDAT-SW-STRUCTURE-MIB

telProdNpMonInterfRouter

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
teldatCellularInfoInterfaceEntry	1.3.6.1.4.1.2007.4.1.2.2.2.18.1.1		not-accessible	A base list of objects that are information about a Cellular interface. The inex is the number of the interface
INT teldatCellularInfoInterfaceIndex	1.3.6.1.4.1.2007.4.1.2.2.2.18.1.1.1	INTEGER	read-only	Interface index
STR teldatCellularInfoInterfaceModuleFirmware	1.3.6.1.4.1.2007.4.1.2.2.2.18.1.1.4	DisplayString	read-only	Cellular module firmware release.
STR teldatCellularInfoInterfaceModuleIMEI	1.3.6.1.4.1.2007.4.1.2.2.2.18.1.1.5	DisplayString	read-only	Cellular module IMEI.
STR teldatCellularInfoInterfaceModuleIMSI	1.3.6.1.4.1.2007.4.1.2.2.2.18.1.1.6	DisplayString	read-only	Cellular module IMSI.
STR teldatCellularInfoInterfaceModuleManufacturer	1.3.6.1.4.1.2007.4.1.2.2.2.18.1.1.2	DisplayString	read-only	Cellular module manufacturer.
STR teldatCellularInfoInterfaceModuleModel	1.3.6.1.4.1.2007.4.1.2.2.2.18.1.1.3	DisplayString	read-only	Cellular module model.
STR teldatCellularInfoInterfaceSIMIcc	1.3.6.1.4.1.2007.4.1.2.2.2.18.1.1.8	DisplayString	read-only	Cellular active SIM ICC.
STR teldatCellularInfoInterfaceSIMId	1.3.6.1.4.1.2007.4.1.2.2.2.18.1.1.7	DisplayString	read-only	Cellular active SIM ID.
teldatCellularInfoInterfaceTable	1.3.6.1.4.1.2007.4.1.2.2.2.18.1		not-accessible	Table of information available for Cellular interfaces. Each row represents an interface
STR teldatCellularProfDialAPN1	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.4.1.3	DisplayString	read-only	Access Point Name(1) associated to cellular interface.
STR teldatCellularProfDialAPN2	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.4.1.5	DisplayString	read-only	Access Point Name(2) associated to cellular interface.
teldatCellularProfDialEntry	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.4.1		not-accessible	A list of objects that show Dial Profile information
INT teldatCellularProfDialIfcIndex	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.4.1.1	INTEGER	read-only	Interface index.
STR teldatCellularProfDialName1	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.4.1.2	DisplayString	read-only	Dial Profile Name(1) associated to cellular interface.
STR teldatCellularProfDialName2	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.4.1.4	DisplayString	read-only	Dial Profile Name(2) associated to cellular interface.
teldatCellularProfDialTable	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.4		not-accessible	Table of Cellular Dial Profile information.
teldatCellularRecChangesEntry	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.5.1		not-accessible	A list of objects that show information about cellular record-changes
INT teldatCellularRecChangesIfcIndex	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.5.1.1	INTEGER	read-only	Interface index.
STR teldatCellularRecChangesPLMNCode	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.5.1.3	DisplayString	read-only	Display the latest change of Public Land Mobile Network (PLMN) code.
STR teldatCellularRecChangesPLMNTimeStamp	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.5.1.2	DisplayString	read-only	Display the timestamp of the latest change of Public Land Mobile Network (PLMN) code.
teldatCellularRecChangesTable	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.5		not-accessible	Table of Cellular record-changes information.
INT teldatCellularSIMMngCurrentSIMSocket	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.3.1.2	INTEGER	read-only	Current SIM Socket.
teldatCellularSIMMngEntry	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.3.1		not-accessible	A base list of objects that are sim management information.
INT teldatCellularSIMMngIndex	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.3.1.1	INTEGER	read-only	Cellular mobile state index.
INT teldatCellularSIMMngMainSIMSocket	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.3.1.3	INTEGER	read-only	Main SIM Socket.
STR teldatCellularSIMMngSIMIdInfoSocket1	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.3.1.6	DisplayString	read-only	SIM ID of the SIM inserted in Socket1
STR teldatCellularSIMMngSIMIdInfoSocket2	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.3.1.8	DisplayString	read-only	SIM ID of the SIM inserted in Socket2
STR teldatCellularSIMMngSIMImsiInfoSocket1	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.3.1.5	DisplayString	read-only	IMSI of the SIM inserted in Socket1
STR teldatCellularSIMMngSIMImsiInfoSocket2	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.3.1.7	DisplayString	read-only	IMSI of the SIM inserted in Socket2
INT teldatCellularSIMMngSupervisionSIMSocket	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.3.1.4	INTEGER	read-only	Supervision SIM Socket state.
teldatCellularSIMMngTable	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.3		not-accessible	Table of Cellular SIM Management information.
G32 teldatCellularStateInterfaceCConnTime	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.7	Gauge32	read-only	Current connection time.
STR teldatCellularStateInterfaceCurDial	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.8	DisplayString	read-only	Current dial-profile used.
STR teldatCellularStateInterfaceDestination	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.10	DisplayString	read-only	Connection destination.
G32 teldatCellularStateInterfaceDropPing	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.3	Gauge32	read-only	Number of calls dropped due to ping supervision.
G32 teldatCellularStateInterfaceDropTrace	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.4	Gauge32	read-only	Number of calls dropped due to traceroute supervision.
G32 teldatCellularStateInterfaceDropTraffic	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.5	Gauge32	read-only	Number of calls dropped due to traffic supervision.
teldatCellularStateInterfaceEntry	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1		not-accessible	A base list of objects that are interface state information.
INT teldatCellularStateInterfaceIndex	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.1	INTEGER	read-only	Cellular Interface index.
G32 teldatCellularStateInterfaceNCall	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.9	Gauge32	read-only	Number of processed calls.
STR teldatCellularStateInterfaceState	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.2	DisplayString	read-only	Call state.
teldatCellularStateInterfaceTable	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1		not-accessible	Table of Cellular interface state information.
G32 teldatCellularStateInterfaceTConnTime	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.6	Gauge32	read-only	Total connection time .
G32 teldatCellularStateInterfaceTime2Sp	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.1.1.11	Gauge32	read-only	Time to establish the call.
G32 teldatCellularStateMobileCellId	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.5	Gauge32	read-only	Cellular mobile used cell id (+CGREG).
G32 teldatCellularStateMobileCellLocationAreaCode	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.4	Gauge32	read-only	Cellular mobile cell location area code (+CGREG).
INT teldatCellularStateMobileEnergyChipByPwrdnsty	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.9	INTEGER	read-only	Cellular mobile total energy per chip per power density (EcNo).
teldatCellularStateMobileEntry	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1		not-accessible	A base list of objects that are mobile state information.
INT teldatCellularStateMobileIndex	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.1	INTEGER	read-only	Cellular mobile state index.
G32 teldatCellularStateMobileLTECellId	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.25	Gauge32	read-only	Cellular mobile used LTE cell id.
INT teldatCellularStateMobilePublicLandMobileNtwCode	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.3	INTEGER	read-only	Public land mobile network used (+COPS).
STR teldatCellularStateMobileRadioBand	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.7	DisplayString	read-only	Cellular mobile current active band (!GETBAND).
STR teldatCellularStateMobileRadioTechnology	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.6	DisplayString	read-only	Cellular mobile current radio access tecnology used (!GETRAT).
INT teldatCellularStateMobileRegistrationState	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.2	INTEGER	read-only	Cellular mobile registration state ().
G32 teldatCellularStateMobileRxBpsLast1m	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.18	Gauge32	read-only	Rx througput measured in the last minute in bps
G32 teldatCellularStateMobileRxBpsLast1s	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.16	Gauge32	read-only	Rx througput measured in the last second in bps
G32 teldatCellularStateMobileRxBpsLast5m	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.20	Gauge32	read-only	Rx througput measured in the last five minutes in bps
G32 teldatCellularStateMobileRxBytes	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.13	Gauge32	read-only	Number of data bytes received by the radio interface
G32 teldatCellularStateMobileRxPackets	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.12	Gauge32	read-only	Number of data packtes received by the radio interface
INT teldatCellularStateMobileRxRSRP	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.22	INTEGER	read-only	Cellular mobile reference symbol received power (RSRP).
INT teldatCellularStateMobileRxRSRQ	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.23	INTEGER	read-only	Cellular mobile reference signal received quality (RSRQ).
INT teldatCellularStateMobileRxSignalCodePwr	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.8	INTEGER	read-only	Cellular mobile received signal code power (RSCP).
INT teldatCellularStateMobileRxSINR	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.24	INTEGER	read-only	Cellular mobile signal versus noise ratio (SINR).
INT teldatCellularStateMobileSignalQuality	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.10	INTEGER	read-only	Cellular mobile reception signal quality (+CSQ).
teldatCellularStateMobileTable	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2		not-accessible	Table of Cellular mobile state information.
INT teldatCellularStateMobileTemperature	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.11	INTEGER	read-only	Cellular mobile temperature (!PCTEMP).
G32 teldatCellularStateMobileTxBpsLast1m	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.19	Gauge32	read-only	Tx througput measured in the last minute in bps
G32 teldatCellularStateMobileTxBpsLast1s	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.17	Gauge32	read-only	Tx througput measured in the last second in bps
G32 teldatCellularStateMobileTxBpsLast5m	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.21	Gauge32	read-only	Tx througput measured in the last five minutes in bps
G32 teldatCellularStateMobileTxBytes	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.15	Gauge32	read-only	Number of data packtes sent by the radio interface
G32 teldatCellularStateMobileTxPackets	1.3.6.1.4.1.2007.4.1.2.2.2.18.3.2.1.14	Gauge32	read-only	Number of data packtes sent by the radio interface
teldatCellularStatObject	1.3.6.1.4.1.2007.4.1.2.2.2.18.3
telProdNpMonInterfCellular	1.3.6.1.4.1.2007.4.1.2.2.2.18

RFC description

Monitoring of Teldat cellular interfaces including statistics for mobile network connectivity.

Start monitoring Teldat router with cellular WAN module (modem identity/signal/connection status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELDAT-MON-INTERF-CELLULAR-MIB

What Is TELDAT-MON-INTERF-CELLULAR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description