TELDAT-MON-FEATURES-NSLA-MIB

All MIBs › TELDAT-MON-FEATURES-NSLA-MIB

Organization: Teldat, S.A.

Last Updated: 2006-05-16

Category: Teldat Router Management

Description: Monitors Teldat router network SLA (NSLA) feature measurements, probe results, and threshold violation status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELDAT-MON-FEATURES-NSLA-MIB?

TELDAT-MON-FEATURES-NSLA-MIB is a vendor-specific MIB from Teldat covering the Network Level Service Advisor (NSLA) feature, which filters and logically combines results from the router's Network Service Monitor (NSM) probes and level indicators into boolean outcomes usable by other router features (such as routing failover decisions). It exposes a filter table describing each configured NSLA filter's activation state, enable/mute flags, inversion logic, output result, and toggle/activity thresholds. Its monitoring purpose is software feature and service-health status: administrators watch whether a given NSLA filter's boolean output indicates a monitored network condition (e.g., link or service reachability) has failed a threshold, and can see whether a filter has been manually or configuration-muted, disabled, or inverted, which affects how alarms and failover logic behave. It explicitly depends on and aggregates results from the Teldat NSM (Network Service Monitor) subsystem and its 'Level Indicator' updates, making it a higher-level correlation layer rather than a standalone probe. It is typically deployed on Teldat routers using SLA-based path monitoring to drive automatic failover or alerting when a network service or link degrades. Engineers can download the TELDAT-MON-FEATURES-NSLA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-MON-FEATURES-NSLA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teldat enterprise/carrier routers

Monitoring Examples

An administrator would poll teldatNslaFilterTable / teldatNslaFilterEntry keyed by teldatNslaFilterIndex to read teldatNslaFilterOutput, the current boolean result of the filter's logic; if this flips to a failing state while teldatNslaFilterCfgEnable and teldatNslaFilterUserEnable both show the filter active, it signals a genuine underlying NSM/service degradation rather than an administratively disabled check. Fields like teldatNslaFilterCfgMute, teldatNslaFilterUserMute, and teldatNslaFilterOverActTh help distinguish an intentionally silenced filter from one that has exceeded its activation threshold, and teldatNslaFilterToggles counts how often the result has flapped.

What Can Be Monitored

NSLA filter boolean output/result
filter enable/mute/invert state
filter activation threshold and toggle count
service/link degradation status

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

From TELDAT-SW-STRUCTURE-MIB

telProdNpMonFeatures

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
telProdNpMonFeatNsla	1.3.6.1.4.1.2007.4.1.2.4.7			This module defines a MIB for Network Level Service Advisor (NSLA) wich provides a way of filtering and logic processing the result of Network Service Monitor (NSM) operations and Level Indicator updates and generates a boolean result to be used in several router modules: MIB for management of Teldat feature Network Level Service Advisor. The table structure overview is as follows (t: indicates a table, at: indicates an augmented table, and it: indicates table with the same indices/control as parent table): NSLA MIB \|t++ Filter Table \|t++ Advisor Table \|t++ Alarm Table \|+++ NSLA Enabled \|+++ NSLA Muted
teldatNslaObjects	1.3.6.1.4.1.2007.4.1.2.4.7.1
teldatNslaFilterTable	1.3.6.1.4.1.2007.4.1.2.4.7.1.1		not-accessible	A table of NSLA monitoring definitions. The NSLA administration control is in multiple tables. This table controls the Filters state.
teldatNslaFilterEntry	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1		not-accessible	A base list of objects that define an Filter control row.
NSL teldatNslaFilterIndex	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.1	NslaTableIndex	not-accessible	Uniquely identifies a row in the teldatNslaFilterTable.
T/F teldatNslaFilterOutput	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.2	TruthValue	read-only	This is the output value of the Filter of this row.
INT teldatNslaFilterUserActivate	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.3	INTEGER	read-write	Force the Output of the Filter. Can be enabled, disabled or normal wich means that the output is the current output of the Filter.
INT teldatNslaFilterUserEnable	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.4	INTEGER	read-write	With this object the Filter can be enabled/disabled.
INT teldatNslaFilterUserMute	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.5	INTEGER	read-write	With this object the Filter can be muted/unmuted.
INT teldatNslaFilterCfgEnable	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.6	INTEGER	read-only	Enabled/disabled configuration of the Filter.
INT teldatNslaFilterCfgMute	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.7	INTEGER	read-only	Muted/unmuted configuration of the Filter.
INT teldatNslaFilterCfgInvert	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.8	INTEGER	read-only	Normal/inverted configuration of the Filter.
U32 teldatNslaFilterToggles	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.9	Unsigned32	read-only	Number of current toggles of the Filter.
U32 teldatNslaFilterOverActTh	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.10	Unsigned32	read-only	Number of samples over the activation threshold of the Filter.
U32 teldatNslaFilterUnderDeactTh	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.11	Unsigned32	read-only	Number of samples under the deactivation threshold of the Filter.
INT teldatNslaFilterActPercent	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.12	INTEGER	read-only	Current percentage of samples over the activation threshold in the filtering window.
U32 teldatNslaFilterActTime	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.13	Unsigned32	read-only	Time since window activation.
INT teldatNslaFilterDeactPercent	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.14	INTEGER	read-only	Current percentage of samples under the deactivation threshold in the filtering window.
U32 teldatNslaFilterDeactTime	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.15	Unsigned32	read-only	Time since window deactivation.
INT teldatNslaFilterLastSample	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.16	INTEGER	read-only	Numbers of samples required to execute the calculations.
U32 teldatNslaFilterTotalSamples	1.3.6.1.4.1.2007.4.1.2.4.7.1.1.1.17	Unsigned32	read-only	Total number of samples
teldatNslaAlarmTable	1.3.6.1.4.1.2007.4.1.2.4.7.1.2		not-accessible	A table of NSLA monitoring definitions. The NSLA administration control is in multiple tables. This table controls the Alarms state.
teldatNslaAlarmEntry	1.3.6.1.4.1.2007.4.1.2.4.7.1.2.1		not-accessible	A base list of objects that define an Alarm control row.
NSL teldatNslaAlarmIndex	1.3.6.1.4.1.2007.4.1.2.4.7.1.2.1.1	NslaTableIndex	not-accessible	Uniquely identifies a row in the teldatNslaAlarmTable.
T/F teldatNslaAlarmOutput	1.3.6.1.4.1.2007.4.1.2.4.7.1.2.1.2	TruthValue	read-only	This is the output value of the Alarm of this row.
INT teldatNslaAlarmUserActivate	1.3.6.1.4.1.2007.4.1.2.4.7.1.2.1.3	INTEGER	read-write	Force the Output of the Alarm. Can be enabled, disabled or normal wich means that the output is the current output of the Alarm.
INT teldatNslaAlarmUserEnable	1.3.6.1.4.1.2007.4.1.2.4.7.1.2.1.4	INTEGER	read-write	With this object the Alarm can be enabled/disabled.
INT teldatNslaAlarmUserMute	1.3.6.1.4.1.2007.4.1.2.4.7.1.2.1.5	INTEGER	read-write	With this object the Alarm can be muted/unmuted.
INT teldatNslaAlarmCfgEnable	1.3.6.1.4.1.2007.4.1.2.4.7.1.2.1.6	INTEGER	read-only	Enabled/disabled configuration of the Alarm.
INT teldatNslaAlarmCfgMute	1.3.6.1.4.1.2007.4.1.2.4.7.1.2.1.7	INTEGER	read-only	Muted/unmuted configuration of the Alarm.
INT teldatNslaAlarmCfgInvert	1.3.6.1.4.1.2007.4.1.2.4.7.1.2.1.8	INTEGER	read-only	Normal/inverted configuration of the Alarm.
STR teldatNslaAlarmExpression	1.3.6.1.4.1.2007.4.1.2.4.7.1.2.1.9	DisplayString	read-only	Alarm boolean expression.
teldatNslaAdvisorTable	1.3.6.1.4.1.2007.4.1.2.4.7.1.3		not-accessible	A table of NSLA monitoring definitions. The NSLA administration control is in multiple tables. This table controls the Advisors state.
teldatNslaAdvisorEntry	1.3.6.1.4.1.2007.4.1.2.4.7.1.3.1		not-accessible	A base list of objects that define an Advisor control row.
NSL teldatNslaAdvisorIndex	1.3.6.1.4.1.2007.4.1.2.4.7.1.3.1.1	NslaTableIndex	not-accessible	Uniquely identifies a row in the teldatNslaAdvisorTable.
T/F teldatNslaAdvisorOutput	1.3.6.1.4.1.2007.4.1.2.4.7.1.3.1.2	TruthValue	read-only	This is the output value of the Advisor of this row.
INT teldatNslaAdvisorUserActivate	1.3.6.1.4.1.2007.4.1.2.4.7.1.3.1.3	INTEGER	read-write	Force the Output of the Advisor. Can be enabled, disabled or normal wich means that the output is the current output of the Advisor.
INT teldatNslaAdvisorUserEnable	1.3.6.1.4.1.2007.4.1.2.4.7.1.3.1.4	INTEGER	read-write	With this object the Advisor can be enabled/disabled.
INT teldatNslaAdvisorUserMute	1.3.6.1.4.1.2007.4.1.2.4.7.1.3.1.5	INTEGER	read-write	With this object the Advisor can be muted/unmuted.
INT teldatNslaAdvisorCfgEnable	1.3.6.1.4.1.2007.4.1.2.4.7.1.3.1.6	INTEGER	read-only	Enabled/disabled configuration of the Advisor.
INT teldatNslaAdvisorCfgMute	1.3.6.1.4.1.2007.4.1.2.4.7.1.3.1.7	INTEGER	read-only	Muted/unmuted configuration of the Advisor.
INT teldatNslaAdvisorCfgInvert	1.3.6.1.4.1.2007.4.1.2.4.7.1.3.1.8	INTEGER	read-only	Normal/inverted configuration of the Advisor.
STR teldatNslaAdvisorExpression	1.3.6.1.4.1.2007.4.1.2.4.7.1.3.1.9	DisplayString	read-only	Advisor boolean expression.
INT teldatNslaGlobalEnabled	1.3.6.1.4.1.2007.4.1.2.4.7.1.4	INTEGER	read-write	Global NSLA enable state.
INT teldatNslaGlobalMute	1.3.6.1.4.1.2007.4.1.2.4.7.1.5	INTEGER	read-write	Global NSLA mute state.
teldatNslaNotificationsPrefix	1.3.6.1.4.1.2007.4.1.2.4.7.2
teldatNslaNotifications	1.3.6.1.4.1.2007.4.1.2.4.7.2.0
teldatNslaMibConformance	1.3.6.1.4.1.2007.4.1.2.4.7.3
teldatNslaMibCompliances	1.3.6.1.4.1.2007.4.1.2.4.7.3.1
teldatNslaMibGroups	1.3.6.1.4.1.2007.4.1.2.4.7.3.2

RFC description

Teldat vendor-private MIB for Network Service Level Agreement (NSLA) feature monitoring and filtering.

Start monitoring Teldat enterprise/carrier router (Network Level Service Advisor filter/alarm status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELDAT-MON-FEATURES-NSLA-MIB

What Is TELDAT-MON-FEATURES-NSLA-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description