All MIBs › TELDAT-MON-INTERF-WLAN-MIB › telProdNpMonInterfWlanRadioIfFragmentThreshold
telProdNpMonInterfWlanRadioIfFragmentThreshold
Module: TELDAT-MON-INTERF-WLAN-MIB
OID (symbolic): TELDAT-MON-INTERF-WLAN-MIB::telProdNpMonInterfWlanRadioIfFragmentThreshold
OID (numeric): 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute shall specify the mandatory maximum size, in octets, of the PSDU that may be delivered to the PHY. This maximum size does not apply in the case of A-MPDU. An MSDU, A-MSDU or MMPDU shall be broken into fragments if its size exceeds the value of this attribute after adding MAC headers and trailers. An MSDU, A-MSDU or MMPDU shall be fragmented when the resulting frame has an individual address in the Address1 field, and the length of the frame is larger than this threshold. The default value for this attribute shall be the lesser of 8000 or the aMPDUMaxLength or the aPSDUMaxLength of the attached PHY and shall never exceed the lesser of 8000 or the aMPDUMaxLength or the aPSDUMaxLength of the attached PHY. The value of this attribute shall never be less than 256.
What is telProdNpMonInterfWlanRadioIfFragmentThreshold?
The maximum frame size, in octets (256-8000), before the radio fragments a frame into smaller pieces prior to transmission. Lowering this on a noisy RF link can reduce retransmission cost, since a corrupted small fragment is cheaper to resend than a large one.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.11 snmpwalk -v2c -c public <target> TELDAT-MON-INTERF-WLAN-MIB::telProdNpMonInterfWlanRadioIfFragmentThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.11.1 snmpget -v2c -c public <target> TELDAT-MON-INTERF-WLAN-MIB::telProdNpMonInterfWlanRadioIfFragmentThreshold.1
Start monitoring Teldat routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-MON-INTERF-WLAN-MIB::telProdNpMonInterfWlanRadioIfFragmentThreshold OID value, configure state conditions and alerts, and monitor any Teldat routers from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2007 | teldat | TELDAT-MIB |
| 1.3.6.1.4.1.2007.4 | telproducts | TELDAT-MIB |
| 1.3.6.1.4.1.2007.4.1 | telProductsNucleox | TELDAT-SW-STRUCTURE-MIB |
| 1.3.6.1.4.1.2007.4.1.2 | telProductsNpMonit | TELDAT-SW-STRUCTURE-MIB |
| 1.3.6.1.4.1.2007.4.1.2.2 | telProdNpMonInterface | TELDAT-SW-STRUCTURE-MIB |
| 1.3.6.1.4.1.2007.4.1.2.2.2 | telProdNpMonInterfRouter | TELDAT-SW-STRUCTURE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2007.4.1.2.2.2.24 | telProdNpMonInterfWlan | TELDAT-MON-INTERF-WLAN-MIB |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1 | telProdNpMonInterfWlanRadioTable | TELDAT-MON-INTERF-WLAN-MIB |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1 | telProdNpMonInterfWlanRadioEntry | TELDAT-MON-INTERF-WLAN-MIB |
| 1.3.6.1.4.1.2007.4.1.2.2.2.24.1.1.11 | telProdNpMonInterfWlanRadioIfFragmentThreshold | TELDAT-MON-INTERF-WLAN-MIB |