TELDAT-MON-INTERF-RCELLULAR-MIB

All MIBs › TELDAT-MON-INTERF-RCELLULAR-MIB

Category: Teldat Router Management, Wireless and Cellular Networking

Description: Monitors Teldat router redundant cellular interface failover status, active link selection, and switchover event counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELDAT-MON-INTERF-RCELLULAR-MIB?

TELDAT-MON-INTERF-RCELLULAR-MIB is a Teldat-specific monitoring MIB for redundant cellular WAN interfaces on Teldat routers, tracking which cellular module is currently active in a failover pair and the health of the switchover mechanism. It exposes hardware inventory data about the cellular module itself (manufacturer, model, firmware version, IMEI, IMSI, SIM ID and ICC identifier) alongside interface state and switchover event counters. Its monitoring value directly covers hardware and software status: firmware version tracking supports upgrade/compliance auditing, SIM and module identifiers support asset and provisioning verification, and interface state/switchover counters reveal cellular failover reliability and unexpected link flapping. It builds on Teldat's common interface monitoring conventions and likely correlates with standard IF-MIB interface indices for the cellular ports. It is deployed on Teldat routers used for cellular WAN backup or primary connectivity in branch-office and remote-site deployments requiring link redundancy, and a TELDAT-MON-INTERF-RCELLULAR-MIB download is available for administrators who need to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-MON-INTERF-RCELLULAR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teldat router with redundant cellular WAN interfaces

Monitoring Examples

An administrator would poll teldatRcellularInfoInterfaceTable to read teldatRcellularInfoInterfaceModuleManufacturer, teldatRcellularInfoInterfaceModuleModel, and teldatRcellularInfoInterfaceModuleFirmware for hardware/firmware inventory, and check teldatRcellularInfoInterfaceModuleIMEI/IMSI and teldatRcellularInfoInterfaceSIMId/SIMIcc to confirm the correct SIM is installed. teldatRcellularStateInterfaceTable would then be polled to determine which cellular interface is currently the active link in the redundant pair, with unexpected or frequent state changes indicating an unstable cellular connection or a failing module. teldatRcellularStatObject counters would reveal how often switchover events have occurred, useful for spotting a cellular link that is flapping between primary and backup.

What Can Be Monitored

active/standby cellular interface state
cellular module manufacturer and model
cellular module firmware version
module IMEI and IMSI
SIM ID and ICC identifier
switchover event statistics

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1213-MIB

DisplayString

From TELDAT-SW-STRUCTURE-MIB

telProdNpMonInterfRouter

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
telProdNpMonInterfRcellular	1.3.6.1.4.1.2007.4.1.2.2.2.20
teldatRcellularInfoInterfaceTable	1.3.6.1.4.1.2007.4.1.2.2.2.20.1		not-accessible	Table of information available for Rcellular interfaces. Each row represents an interface
teldatRcellularInfoInterfaceEntry	1.3.6.1.4.1.2007.4.1.2.2.2.20.1.1		not-accessible	A base list of objects that are information about a Rcellular interface. The inex is the number of the interface
INT teldatRcellularInfoInterfaceIndex	1.3.6.1.4.1.2007.4.1.2.2.2.20.1.1.1	INTEGER	read-only	Interface index
STR teldatRcellularInfoInterfaceModuleManufacturer	1.3.6.1.4.1.2007.4.1.2.2.2.20.1.1.2	DisplayString	read-only	Rcellular module manufacturer.
STR teldatRcellularInfoInterfaceModuleModel	1.3.6.1.4.1.2007.4.1.2.2.2.20.1.1.3	DisplayString	read-only	Rcellular module model.
STR teldatRcellularInfoInterfaceModuleFirmware	1.3.6.1.4.1.2007.4.1.2.2.2.20.1.1.4	DisplayString	read-only	Rcellular module firmware release.
STR teldatRcellularInfoInterfaceModuleIMEI	1.3.6.1.4.1.2007.4.1.2.2.2.20.1.1.5	DisplayString	read-only	Rcellular module IMEI.
STR teldatRcellularInfoInterfaceModuleIMSI	1.3.6.1.4.1.2007.4.1.2.2.2.20.1.1.6	DisplayString	read-only	Rcellular module IMSI.
STR teldatRcellularInfoInterfaceSIMId	1.3.6.1.4.1.2007.4.1.2.2.2.20.1.1.7	DisplayString	read-only	Rcellular active SIM ID.
STR teldatRcellularInfoInterfaceSIMIcc	1.3.6.1.4.1.2007.4.1.2.2.2.20.1.1.8	DisplayString	read-only	Rcellular active SIM ICC.
teldatRcellularStatObject	1.3.6.1.4.1.2007.4.1.2.2.2.20.3
teldatRcellularStateInterfaceTable	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1		not-accessible	Table of Rcellular interface state information.
teldatRcellularStateInterfaceEntry	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1		not-accessible	A base list of objects that are interface state information.
INT teldatRcellularStateInterfaceIndex	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.1	INTEGER	read-only	Rcellular Interface index.
INT teldatRcellularStateInterfaceState	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.2	INTEGER	read-only	Call state.
INT teldatRcellularStateInterfaceDropPing	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.3	INTEGER	read-only	Number of calls dropped due to ping supervision.
INT teldatRcellularStateInterfaceDropTrace	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.4	INTEGER	read-only	Number of calls dropped due to traceroute supervision.
INT teldatRcellularStateInterfaceDropTraffic	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.5	INTEGER	read-only	Number of calls dropped due to traffic supervision.
INT teldatRcellularStateInterfaceTConnTime	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.6	INTEGER	read-only	Total connection time .
INT teldatRcellularStateInterfaceCConnTime	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.7	INTEGER	read-only	Current connection time.
STR teldatRcellularStateInterfaceCurDial	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.8	DisplayString	read-only	Current dial-profile used.
INT teldatRcellularStateInterfaceNCall	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.9	INTEGER	read-only	Number of processed calls.
STR teldatRcellularStateInterfaceDestination	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.10	DisplayString	read-only	Connection destination.
INT teldatRcellularStateInterfaceTime2Sp	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.1.1.11	INTEGER	read-only	Time to establish the call.
teldatRcellularStateMobileTable	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2		not-accessible	Table of Rcellular mobile state information.
teldatRcellularStateMobileEntry	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1		not-accessible	A base list of objects that are mobile state information.
INT teldatRcellularStateMobileIndex	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.1	INTEGER	read-only	Rcellular mobile state index.
INT teldatRcellularStateMobileRegistrationState	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.2	INTEGER	read-only	Rcellular mobile registration state ().
INT teldatRcellularStateMobilePublicLandMobileNtwCode	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.3	INTEGER	read-only	Public land mobile network used (+COPS).
INT teldatRcellularStateMobileCellLocationAreaCode	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.4	INTEGER	read-only	Rcellular mobile cell location area code (+CGREG).
INT teldatRcellularStateMobileCellId	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.5	INTEGER	read-only	Rcellular mobile used cell id (+CGREG).
STR teldatRcellularStateMobileRadioTechnology	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.6	DisplayString	read-only	Rcellular mobile current radio access tecnology used (!GETRAT).
STR teldatRcellularStateMobileRadioBand	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.7	DisplayString	read-only	Rcellular mobile current active band (!GETBAND).
INT teldatRcellularStateMobileRxSignalCodePwr	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.8	INTEGER	read-only	Rcellular mobile received signal code power (RSCP).
INT teldatRcellularStateMobileEnergyChipByPwrdnsty	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.9	INTEGER	read-only	Rcellular mobile total energy per chip per power density (EcNo).
INT teldatRcellularStateMobileSignalQuality	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.10	INTEGER	read-only	Rcellular mobile reception signal quality (+CSQ).
INT teldatRcellularStateMobileTemperature	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.11	INTEGER	read-only	Rcellular mobile temperature (!PCTEMP).
INT teldatRcellularStateMobileRxPackets	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.12	INTEGER	read-only	Number of data packtes received by the radio interface
INT teldatRcellularStateMobileRxBytes	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.13	INTEGER	read-only	Number of data bytes received by the radio interface
INT teldatRcellularStateMobileTxPackets	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.14	INTEGER	read-only	Number of data packtes sent by the radio interface
INT teldatRcellularStateMobileTxBytes	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.15	INTEGER	read-only	Number of data packtes sent by the radio interface
INT teldatRcellularStateMobileRxBpsLast1s	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.16	INTEGER	read-only	Rx througput measured in the last second in bps
INT teldatRcellularStateMobileTxBpsLast1s	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.17	INTEGER	read-only	Tx througput measured in the last second in bps
INT teldatRcellularStateMobileRxBpsLast1m	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.18	INTEGER	read-only	Rx througput measured in the last minute in bps
INT teldatRcellularStateMobileTxBpsLast1m	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.19	INTEGER	read-only	Tx througput measured in the last minute in bps
INT teldatRcellularStateMobileRxBpsLast5m	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.20	INTEGER	read-only	Rx througput measured in the last five minutes in bps
INT teldatRcellularStateMobileTxBpsLast5m	1.3.6.1.4.1.2007.4.1.2.2.2.20.3.2.1.21	INTEGER	read-only	Tx througput measured in the last five minutes in bps

RFC description

Monitors remote cellular interface metrics including module information, signal strength, and throughput statistics.

Start monitoring Teldat router with redundant cellular WAN interfaces (failover/switchover status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELDAT-MON-INTERF-RCELLULAR-MIB

What Is TELDAT-MON-INTERF-RCELLULAR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description