| OID symbolic | OID numeric | Type | Access | Description |
|---|
| telProdNpConfProtSNMP | 1.3.6.1.4.1.2007.4.1.1.5.4 | | | |
| telProdNpSNMPGloGroup | 1.3.6.1.4.1.2007.4.1.1.5.4.1 | | | |
| INT telProdNpSNMPGloHabSnmp | 1.3.6.1.4.1.2007.4.1.1.5.4.1.1 | INTEGER | read-write | This variables allows enabling / disabling SNMP.
Default value is 2(no), disabled. |
| INT telProdNpSNMPGloHabDefect | 1.3.6.1.4.1.2007.4.1.1.5.4.1.2 | INTEGER | read-write | This variable enables SNMP default configuration.
Default value is 1(yes), enabled. |
| INT telProdNpSNMPGloConfPort | 1.3.6.1.4.1.2007.4.1.1.5.4.1.3 | INTEGER | read-write | This variable configures traps port.
Default value is 162. |
| INT telProdNpSNMPGloMaxTimeTrapPend | 1.3.6.1.4.1.2007.4.1.1.5.4.1.4 | INTEGER | read-write | Maximum time of pending traps sending.
Default value is 50. |
| INT telProdNpSNMPGloMaxNumTrapPend | 1.3.6.1.4.1.2007.4.1.1.5.4.1.5 | INTEGER | read-write | Maximum number of traps pending of sending.
Default value is 32. |
| INT telProdNpSNMPGloMaxDestTrap | 1.3.6.1.4.1.2007.4.1.1.5.4.1.6 | INTEGER | read-write | Maximum number of traps destinations.
Default value is 4. |
| INT telProdNpSNMPGloCheckDest | 1.3.6.1.4.1.2007.4.1.1.5.4.1.7 | INTEGER | read-write | This variable is used to enable/disable the reachability checking for
the manager stations configured as trap destinations before sending.
If this parameter is set to ip-route (this will only check there is an
IP route to the destination), it makes no sense to periodically send
the ECHo UDP or ICMP which are used to find out which managers can be
reached.
The permitted values for this variable are:
(1) ip-route: traps are only sent when a route to the destination has
existed during certain time.
(2) udp: enables ECHo UDP sending to the destinations to check if they
are accessible.
(3) icmp: enables ECHo ICMP sending to the destinations to check if
they are accessible.
The default value is 2 (udp). |
| INT telProdNpSNMPComIndex | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.1 | INTEGER | read-only | Snmp community number. It is the table index. |
| STR telProdNpSNMPComCreate | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.2 | DisplayString | read-write | Variable to add a table row.
To add a snmp community, it is necessary to realize a set and
pass the name of the new community. If it is repeated, then it will
return error. |
| INT telProdNpSNMPComDelete | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.3 | INTEGER | read-write | Variable to delete a table row.
To delete a snmp community, a set to 1 must be realized. Get returns
2 if the last set was realized succesfully; 3 if it resulted in error and 4
in another case. |
| STR telProdNpSNMPComName | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.4 | DisplayString | read-write | Community name; maximum: 32 characters. |
| INT telProdNpSNMPComAccess | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.5 | INTEGER | read-write | Access type for the community:
1 allows reading, writing and the reception of traps;
2, reading and traps;
3, only traps.
Default value is 2 (READ-TRAP). |
| INT telProdNpSNMPComHabTrapAll | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.6 | INTEGER | read-write | This variable allows enabling/disabling all traps.
It only allows set to 1 (all traps) and 2 (none).
Its value affects to the variables of the individual traps.
If it is enabled/disabled, then all the others will be enabled/disabled.
If there are enabled and disabled traps, its value is 3 (some traps).
Default value is 2 (none). |
| INT telProdNpSNMPComHabTrapColdStart | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.7 | INTEGER | read-write | This variable allows enabling/disabling Cold Start traps.
Default value is 2(no), disabled. |
| INT telProdNpSNMPComHabTrapWarmStart | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.8 | INTEGER | read-write | This variable allows enabling/disabling Warm Start traps.
Default value is 2(no), disabled. |
| INT telProdNpSNMPComHabTrapLinkDown | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.9 | INTEGER | read-write | This variable allows enabling/disabling Link Down traps.
Default value is 2(no), disabled. |
| INT telProdNpSNMPComHabTrapLinkUp | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.10 | INTEGER | read-write | This variable allows enabling/disabling Link Up traps.
Default value is 2(no), disabled. |
| INT telProdNpSNMPComHabTrapAuthFail | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.11 | INTEGER | read-write | This variable allows enabling/disabling authentication failure traps.
Default value is 2(no), disabled. |
| INT telProdNpSNMPComHabTrapEnt | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.12 | INTEGER | read-write | This variable allows enabling/disabling private traps (enterprise).
Default value is 2(no), disabled. |
| STR telProdNpSNMPComView | 1.3.6.1.4.1.2007.4.1.1.5.4.2.1.13 | DisplayString | read-write | View name. Maximum: 32 characters.
Existing views can only be assigned to the community.
Default value is all. |
| telProdNpSNMPDirTable | 1.3.6.1.4.1.2007.4.1.1.5.4.3 | | not-accessible | List of the IP addresses associated to a community.
There are two indexes: the community and the IP address position. |
| telProdNpSNMPDirEntry | 1.3.6.1.4.1.2007.4.1.1.5.4.3.1 | | not-accessible | Each entry consists of the IP addresses, the community number (first
index), the IP address index (second index), the table control variable,
the community name, the IP address and the mask associated to that
IP address. |
| INT telProdNpSNMPDirComIndex | 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.1 | INTEGER | read-only | Community number associated to the IP address.
It is the first table index. |
| INT telProdNpSNMPDirDirIndex | 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.2 | INTEGER | read-only | Entry number of the IP address.
It is the second table index. |
| INT telProdNpSNMPDirStatus | 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.3 | INTEGER | read-write | Table control variable.
Set to 1 does nothing.
Set to 2 adds a new row (address) in the table with the default
values and returns 2. If it already existed, then it returns error.
The value assigned to neighbor IP address is 0.0.0.1, and if it already
exists, then it increases it in an unit and so on.
It must be added immediately after the last index.
Set to 3 deletes all table fields corresponding to that address, and
returns 3.
Get returns 1 if the address exists. |
| STR telProdNpSNMPDirComName | 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.4 | DisplayString | read-only | Community name. Maximum: 32 characters. |
| IP telProdNpSNMPDirIP | 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.5 | IpAddress | read-write | IP address of this entry.
Default value is 0.0.0.0.
If a new row for a community is requested to which a row with
the default values has already been assigned to it, theb default IP
address will be 0.0.0.1 and so on. |
| IP telProdNpSNMPDirMask | 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.6 | IpAddress | read-write | Mask associated to this IP address.
Default value is 255.0.0.0 |
| telProdNpSNMPSubTable | 1.3.6.1.4.1.2007.4.1.1.5.4.4 | | not-accessible | Subbranches list.
There are two indixes: the view and the subbranch. |
| telProdNpSNMPSubEntry | 1.3.6.1.4.1.2007.4.1.1.5.4.4.1 | | not-accessible | Each entry consists of the subbranches, the associated view number
(first index), the subbranch number (second index), a variable to add
a new row, a variable to delete a table row, the associate view
number and the subbranch oID.
This table creates new subbranches associated to tree views.
If the view doesn't exist, then it creates it and it associates the
concrete subbranch to it. |
| INT telProdNpSNMPSubViewIndex | 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.1 | INTEGER | read-only | View number associated to the IP address.
It is the first table index. |
| INT telProdNpSNMPSubSubtreeIndex | 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.2 | INTEGER | read-only | Subbranch number. It is the second table index. |
| STR telProdNpSNMPSubCreate | 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.3 | DisplayString | read-write | This variable allows adding a new table row.
To add a subbranch, and give the name of the
new subbranch.
If it is repeated (there already is a view with an equal associate
subbranch), then it will return error.
If the view doesn't exist, then it creates it and it associates the
concrete subbranch to it. |
| INT telProdNpSNMPSubDel | 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.4 | INTEGER | read-write | This variable allows deleting a table row.
To add a subbranch, a set to 1 must be done.
Get returns 2 if the last set was realized, 3 if it was wrong and 4
in another case. |
| STR telProdNpSNMPSubNameView | 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.5 | DisplayString | read-write | View name. Maximum: 32 characters.
If it is tried to give a view name that it already exists, and in
addition it already has an equal associate subbranch, then it will
return error. |
| OID telProdNpSNMPSuboID | 1.3.6.1.4.1.2007.4.1.1.5.4.4.1.6 | OBJECT IDENTIFIER | read-write | Subbranch identifier.
Default value is 0.0.
If it is tried to add a subbranch with the default oID to a view in
which that default oID already exists, then the value will be incremented
in an unit and so on. |
