TELDAT-CFG-PROTOCOL-SNMP-MIB :: telProdNpSNMPDirStatus

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › TELDAT-CFG-PROTOCOL-SNMP-MIB › telProdNpSNMPDirStatus

telProdNpSNMPDirStatus

Module: TELDAT-CFG-PROTOCOL-SNMP-MIB

OID (symbolic): TELDAT-CFG-PROTOCOL-SNMP-MIB::telProdNpSNMPDirStatus

OID (numeric): 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Table control variable. Set to 1 does nothing. Set to 2 adds a new row (address) in the table with the default values and returns 2. If it already existed, then it returns error. The value assigned to neighbor IP address is 0.0.0.1, and if it already exists, then it increases it in an unit and so on. It must be added immediately after the last index. Set to 3 deletes all table fields corresponding to that address, and returns 3. Get returns 1 if the address exists.

What is telProdNpSNMPDirStatus?

Controls this IP-address row: valid(1) on a get confirms the address exists and does nothing on a set, add(2) creates a new row with defaults (auto-incrementing the default address if one already exists) and must be set immediately after the last index, and delete(3) removes the row; an admin uses add(2)/delete(3) to manage which manager addresses are allowed for a community.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.3
snmpwalk -v2c -c public <target> TELDAT-CFG-PROTOCOL-SNMP-MIB::telProdNpSNMPDirStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.3.1
snmpget -v2c -c public <target> TELDAT-CFG-PROTOCOL-SNMP-MIB::telProdNpSNMPDirStatus.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2007.4.1.1.5.4.3.1.3.1 i <value>

Start monitoring Teldat routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the TELDAT-CFG-PROTOCOL-SNMP-MIB::telProdNpSNMPDirStatus OID value, configure state conditions and alerts, and monitor any Teldat routers from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2007teldatTELDAT-MIB
1.3.6.1.4.1.2007.4telproductsTELDAT-MIB
1.3.6.1.4.1.2007.4.1telProductsNucleoxTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.1telProductsNpConfigTELDAT-SW-STRUCTURE-MIB
1.3.6.1.4.1.2007.4.1.1.5telProdNpConfProtocolTELDAT-SW-STRUCTURE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2007.4.1.1.5.4telProdNpConfProtSNMPTELDAT-CFG-PROTOCOL-SNMP-MIB
1.3.6.1.4.1.2007.4.1.1.5.4.3telProdNpSNMPDirTableTELDAT-CFG-PROTOCOL-SNMP-MIB
1.3.6.1.4.1.2007.4.1.1.5.4.3.1telProdNpSNMPDirEntryTELDAT-CFG-PROTOCOL-SNMP-MIB
1.3.6.1.4.1.2007.4.1.1.5.4.3.1.3telProdNpSNMPDirStatusTELDAT-CFG-PROTOCOL-SNMP-MIB