TELDAT-TRAP-AT-MIB

All MIBs › TELDAT-TRAP-AT-MIB

Organization: Teldat, S.A.

Last Updated: 2014-01-20

Category: Remote Access and Serial WAN, Teldat Router Management, Teldat Trap Notifications

Description: Defines Teldat router AT (AppleTalk) protocol event trap notifications.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TELDAT-TRAP-AT-MIB?

TELDAT-TRAP-AT-MIB is a Teldat, S.A. proprietary MIB defining SNMP notifications generated by the AT (likely 'Access Type' or line-adapter) event subsystem on Teldat routers. Its varbind objects cover interface name, frame size, call address, destination address, and command string across fifteen numbered event types, each referenced by a correspondingly numbered at-notification trap. As a notification MIB it lets an administrator receive detailed AT-subsystem event alerts (interface, framing, addressing, command) from a Teldat router. It is deployed on Teldat, S.A. routers (AT subsystem). Engineers can download the TELDAT-TRAP-AT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TELDAT-TRAP-AT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Teldat, S.A. routers (AT subsystem)

Monitoring Examples

An administrator investigates an at7 notification and reads at7-destination-address to diagnose an AT-subsystem event on a Teldat router.

What Can Be Monitored

AT subsystem event notifications

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

From TELDAT-MIB

telEventTraps

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
atTrapsMIB	1.3.6.1.4.1.2007.1.4.149			This Module Information Base file is defined for managing received SNMP notifications generated by the AT event subsystem.
atEventsGroup	1.3.6.1.4.1.2007.1.4.149.1
atEventObjects1	1.3.6.1.4.1.2007.1.4.149.1.1			Event AT.1 Selftest completed successfully when modem is detected and initialized.
STR at1_ifcname	1.3.6.1.4.1.2007.1.4.149.1.1.1	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.1
atEventObjects2	1.3.6.1.4.1.2007.1.4.149.1.2			Event AT.2 Maintenance failure. Modem not detected.
STR at2_ifcname	1.3.6.1.4.1.2007.1.4.149.1.2.1	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.2
atEventObjects3	1.3.6.1.4.1.2007.1.4.149.1.3			Event AT.3 An IP packet has been received with a CRC error.
I32 at3_frame_size	1.3.6.1.4.1.2007.1.4.149.1.3.1	Integer32	accessible-for-notify	Parameter 'frame-size' in event AT.3
STR at3_ifcname	1.3.6.1.4.1.2007.1.4.149.1.3.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.3
atEventObjects4	1.3.6.1.4.1.2007.1.4.149.1.4			Event AT.4 End flag is not found on received frame.
I32 at4_frame_size	1.3.6.1.4.1.2007.1.4.149.1.4.1	Integer32	accessible-for-notify	Parameter 'frame-size' in event AT.4
STR at4_ifcname	1.3.6.1.4.1.2007.1.4.149.1.4.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.4
atEventObjects5	1.3.6.1.4.1.2007.1.4.149.1.5			Event AT.5 Incorrect packet format: last character of frame is escape character.
I32 at5_frame_size	1.3.6.1.4.1.2007.1.4.149.1.5.1	Integer32	accessible-for-notify	Parameter 'frame-size' in event AT.5
STR at5_ifcname	1.3.6.1.4.1.2007.1.4.149.1.5.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.5
atEventObjects6	1.3.6.1.4.1.2007.1.4.149.1.6			Event AT.6 A call to the indicated destination address has been initiated.
STR at6_call_address	1.3.6.1.4.1.2007.1.4.149.1.6.1	DisplayString	accessible-for-notify	Parameter 'call-address' in event AT.6
STR at6_ifcname	1.3.6.1.4.1.2007.1.4.149.1.6.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.6
atEventObjects7	1.3.6.1.4.1.2007.1.4.149.1.7			Event AT.7 The call to the indicated destination address has been completed successfully. The call is established.
STR at7_destination_address	1.3.6.1.4.1.2007.1.4.149.1.7.1	DisplayString	accessible-for-notify	Parameter 'destination-address' in event AT.7
STR at7_ifcname	1.3.6.1.4.1.2007.1.4.149.1.7.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.7
atEventObjects8	1.3.6.1.4.1.2007.1.4.149.1.8			Event AT.8 The call to the indicated destination address could not be completed successfully because there is no answer from the remote end. The call is not established.
STR at8_destination_address	1.3.6.1.4.1.2007.1.4.149.1.8.1	DisplayString	accessible-for-notify	Parameter 'destination-address' in event AT.8
STR at8_ifcname	1.3.6.1.4.1.2007.1.4.149.1.8.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.8
atEventObjects9	1.3.6.1.4.1.2007.1.4.149.1.9			Event AT.9 The call to the indicated destination address is released.
STR at9_destination_address	1.3.6.1.4.1.2007.1.4.149.1.9.1	DisplayString	accessible-for-notify	Parameter 'destination-address' in event AT.9
STR at9_ifcname	1.3.6.1.4.1.2007.1.4.149.1.9.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.9
atEventObjects10	1.3.6.1.4.1.2007.1.4.149.1.10			Event AT.10 Incoming call established successfully.
STR at10_ifcname	1.3.6.1.4.1.2007.1.4.149.1.10.1	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.10
atEventObjects11	1.3.6.1.4.1.2007.1.4.149.1.11			Event AT.11 The indicated AT command is not recognized by the modem (it returns ERROR).
STR at11_command	1.3.6.1.4.1.2007.1.4.149.1.11.1	DisplayString	accessible-for-notify	Parameter 'command' in event AT.11
STR at11_ifcname	1.3.6.1.4.1.2007.1.4.149.1.11.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.11
atEventObjects12	1.3.6.1.4.1.2007.1.4.149.1.12			Event AT.12 The modem has given an unknown answer to the indicated AT command.
STR at12_command	1.3.6.1.4.1.2007.1.4.149.1.12.1	DisplayString	accessible-for-notify	Parameter 'command' in event AT.12
STR at12_ifcname	1.3.6.1.4.1.2007.1.4.149.1.12.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.12
atEventObjects13	1.3.6.1.4.1.2007.1.4.149.1.13			Event AT.13 The modem has not answered to the indicated AT command.
STR at13_command	1.3.6.1.4.1.2007.1.4.149.1.13.1	DisplayString	accessible-for-notify	Parameter 'command' in event AT.13
STR at13_ifcname	1.3.6.1.4.1.2007.1.4.149.1.13.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.13
atEventObjects14	1.3.6.1.4.1.2007.1.4.149.1.14			Event AT.14 The modem has not answered to the indicated AT command. Initialization process is retried.
STR at14_ifcname	1.3.6.1.4.1.2007.1.4.149.1.14.1	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.14
atEventObjects15	1.3.6.1.4.1.2007.1.4.149.1.15			Event AT.15 Modem autodetection on indicated interface is being tried.
STR at15_ifcname	1.3.6.1.4.1.2007.1.4.149.1.15.1	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.15
atEventObjects16	1.3.6.1.4.1.2007.1.4.149.1.16			Event AT.16 Modem autodetection has been completed successfully. Initialization string for the detected modem or standard initialization string if the modem is unknown is going to be used next.
STR at16_modem_type	1.3.6.1.4.1.2007.1.4.149.1.16.1	DisplayString	accessible-for-notify	Parameter 'modem-type' in event AT.16
STR at16_ifcname	1.3.6.1.4.1.2007.1.4.149.1.16.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.16
atEventObjects17	1.3.6.1.4.1.2007.1.4.149.1.17			Event AT.17 Modem signals were lost during initialization. Modem must have switched off or must have been disconnected of serial line. Selftest is restarted from the beginning.
STR at17_ifcname	1.3.6.1.4.1.2007.1.4.149.1.17.1	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.17
atEventObjects18	1.3.6.1.4.1.2007.1.4.149.1.18			Event AT.18 The modem returned an error making call because the line is busy or not connected.
STR at18_ifcname	1.3.6.1.4.1.2007.1.4.149.1.18.1	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.18
atEventObjects19	1.3.6.1.4.1.2007.1.4.149.1.19			Event AT.19 The modem returned an error making call because the remote end is busy (it is already making a call).
STR at19_ifcname	1.3.6.1.4.1.2007.1.4.149.1.19.1	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.19
atEventObjects20	1.3.6.1.4.1.2007.1.4.149.1.20			Event AT.20 Generic event. Used for ring pattern detection.
STR at20_string	1.3.6.1.4.1.2007.1.4.149.1.20.1	DisplayString	accessible-for-notify	Parameter 'string' in event AT.20
STR at20_ifcname	1.3.6.1.4.1.2007.1.4.149.1.20.2	DisplayString	accessible-for-notify	Parameter 'ifcname' in event AT.20
atNotifications	1.3.6.1.4.1.2007.1.4.149.2
atNotificationsPrefix	1.3.6.1.4.1.2007.1.4.149.2.0
NTF atNotification1	1.3.6.1.4.1.2007.1.4.149.2.0.1			Notification of Event AT.1 Message: 'Modem initialized sucessfully on interface $1' Parameters list: $1: at1-ifcname Selftest completed successfully when modem is detected and initialized.
NTF atNotification2	1.3.6.1.4.1.2007.1.4.149.2.0.2			Notification of Event AT.2 Message: 'Maintenance failure on interface $1' Parameters list: $1: at2-ifcname Maintenance failure. Modem not detected.
NTF atNotification3	1.3.6.1.4.1.2007.1.4.149.2.0.3			Notification of Event AT.3 Message: 'Received packed with bad crc, frame size $1, on interface $2' Parameters list: $1: at3-frame-size $2: at3-ifcname An IP packet has been received with a CRC error.
NTF atNotification4	1.3.6.1.4.1.2007.1.4.149.2.0.4			Notification of Event AT.4 Message: 'Not received end flag on frame with size $1, on interface $2' Parameters list: $1: at4-frame-size $2: at4-ifcname End flag is not found on received frame.
NTF atNotification5	1.3.6.1.4.1.2007.1.4.149.2.0.5			Notification of Event AT.5 Message: 'Frame ended with escape character with size $1, on interface $2' Parameters list: $1: at5-frame-size $2: at5-ifcname Incorrect packet format: last character of frame is escape character.
NTF atNotification6	1.3.6.1.4.1.2007.1.4.149.2.0.6			Notification of Event AT.6 Message: 'Dial Request Call, Destination address = $1, on interface $2' Parameters list: $1: at6-call-address $2: at6-ifcname A call to the indicated destination address has been initiated.
NTF atNotification7	1.3.6.1.4.1.2007.1.4.149.2.0.7			Notification of Event AT.7 Message: 'Out Call established to $1, on interface $2' Parameters list: $1: at7-destination-address $2: at7-ifcname The call to the indicated destination address has been completed successfully. The call is established.
NTF atNotification8	1.3.6.1.4.1.2007.1.4.149.2.0.8			Notification of Event AT.8 Message: 'Call not established to $1, no answer, on interface $2' Parameters list: $1: at8-destination-address $2: at8-ifcname The call to the indicated destination address could not be completed successfully because there is no answer from the remote end. The call is not established.
NTF atNotification9	1.3.6.1.4.1.2007.1.4.149.2.0.9			Notification of Event AT.9 Message: 'Out Call released to $1, on interface $2' Parameters list: $1: at9-destination-address $2: at9-ifcname The call to the indicated destination address is released.
NTF atNotification10	1.3.6.1.4.1.2007.1.4.149.2.0.10			Notification of Event AT.10 Message: 'Input Call established on interface $1' Parameters list: $1: at10-ifcname Incoming call established successfully.
NTF atNotification11	1.3.6.1.4.1.2007.1.4.149.2.0.11			Notification of Event AT.11 Message: 'Error in AT command $1 interface $2' Parameters list: $1: at11-command $2: at11-ifcname The indicated AT command is not recognized by the modem (it returns ERROR).
NTF atNotification12	1.3.6.1.4.1.2007.1.4.149.2.0.12			Notification of Event AT.12 Message: 'Unknown answer to AT command $1 interface $2' Parameters list: $1: at12-command $2: at12-ifcname The modem has given an unknown answer to the indicated AT command.
NTF atNotification13	1.3.6.1.4.1.2007.1.4.149.2.0.13			Notification of Event AT.13 Message: 'No answer to AT command $1 interface $2' Parameters list: $1: at13-command $2: at13-ifcname The modem has not answered to the indicated AT command.
NTF atNotification14	1.3.6.1.4.1.2007.1.4.149.2.0.14			Notification of Event AT.14 Message: 'No response to AT commands. Retrying... intf $1' Parameters list: $1: at14-ifcname The modem has not answered to the indicated AT command. Initialization process is retried.
NTF atNotification15	1.3.6.1.4.1.2007.1.4.149.2.0.15			Notification of Event AT.15 Message: 'Trying modem autodetection on intf $1' Parameters list: $1: at15-ifcname Modem autodetection on indicated interface is being tried.
NTF atNotification16	1.3.6.1.4.1.2007.1.4.149.2.0.16			Notification of Event AT.16 Message: 'Autodetection completed. $1 modem intf $2' Parameters list: $1: at16-modem-type $2: at16-ifcname Modem autodetection has been completed successfully. Initialization string for the detected modem or standard initialization string if the modem is unknown is going to be used next.
NTF atNotification17	1.3.6.1.4.1.2007.1.4.149.2.0.17			Notification of Event AT.17 Message: 'Modem signals lost. Modem off or disconnected intf $1' Parameters list: $1: at17-ifcname Modem signals were lost during initialization. Modem must have switched off or must have been disconnected of serial line. Selftest is restarted from the beginning.
NTF atNotification18	1.3.6.1.4.1.2007.1.4.149.2.0.18			Notification of Event AT.18 Message: 'Error making call. Line busy (NO DIALTONE) intf $1' Parameters list: $1: at18-ifcname The modem returned an error making call because the line is busy or not connected.
NTF atNotification19	1.3.6.1.4.1.2007.1.4.149.2.0.19			Notification of Event AT.19 Message: 'Error making call. Remote end busy (BUSY) intf $1' Parameters list: $1: at19-ifcname The modem returned an error making call because the remote end is busy (it is already making a call).
NTF atNotification20	1.3.6.1.4.1.2007.1.4.149.2.0.20			Notification of Event AT.20 Message: '$1 intf $2' Parameters list: $1: at20-string $2: at20-ifcname Generic event. Used for ring pattern detection.

RFC description

Manages SNMP notifications and events from AT subsystem on Teldat networking equipment.

Start monitoring Teldat, S.A. routers, AT subsystem (interface/framing/addressing event traps) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TELDAT-TRAP-AT-MIB

What Is TELDAT-TRAP-AT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description