SYNOLOGY-UPS-MIB

All MIBs › SYNOLOGY-UPS-MIB

Organization: www.synology.com

Last Updated: 2013-09-11

Category: Power and UPS

Description: Monitors Synology NAS UPS battery status, charge level, runtime remaining, and power state.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SYNOLOGY-UPS-MIB?

SYNOLOGY-UPS-MIB is a Synology module for monitoring an attached UPS (uninterruptible power supply) unit protecting a Synology NAS, covering device identity and real-time power/battery status. It exposes UPS model, manufacturer, serial number, type, description, contact/location, and MAC address alongside status, alarm, and time-remaining information. Its monitoring emphasis is explicitly on power/hardware status: whether the UPS is on mains or battery power, whether an alarm condition is active, and how much runtime remains on battery, which is critical for triggering a graceful NAS shutdown before power loss causes data loss. It complements the Synology NAS's own health MIBs by covering the external power-protection device rather than the NAS itself. It is deployed on Synology NAS units with a directly attached or network-monitored UPS in home, SMB, or data-closet environments. Engineers can download the SYNOLOGY-UPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SYNOLOGY-UPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Synology NAS with attached UPS
UPS device

Monitoring Examples

An admin polls upsInfoStatus and upsInfoAlarm to detect when the UPS has switched to battery power or raised an alarm, and checks upsInfoTime for estimated runtime remaining, using upsDeviceModel/upsDeviceSerial to confirm which physical UPS unit is reporting. A upsInfoStatus indicating on-battery combined with a rapidly falling upsInfoTime would trigger an automated graceful shutdown of the NAS before the battery is depleted.

What Can Be Monitored

UPS status/alarm state
battery runtime remaining
UPS model/manufacturer/serial
UPS device type/location

Imported Objects

From NET-SNMP-TC

Float

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
synology	1.3.6.1.4.1.6574
synoUPS	1.3.6.1.4.1.6574.4			Characteristics of the ups information
upsDevice	1.3.6.1.4.1.6574.4.1
STR upsDeviceModel	1.3.6.1.4.1.6574.4.1.1	DisplayString	read-only	Device model
STR upsDeviceManufacturer	1.3.6.1.4.1.6574.4.1.2	DisplayString	read-only	Device manufacturer
STR upsDeviceSerial	1.3.6.1.4.1.6574.4.1.3	DisplayString	read-only	Device serial number.
STR upsDeviceType	1.3.6.1.4.1.6574.4.1.4	DisplayString	read-only	Device type (ups, pdu, scd, psu)
STR upsDeviceDescription	1.3.6.1.4.1.6574.4.1.5	DisplayString	read-only	Device description.
STR upsDeviceContact	1.3.6.1.4.1.6574.4.1.6	DisplayString	read-only	Device administrator name.
STR upsDeviceLocation	1.3.6.1.4.1.6574.4.1.7	DisplayString	read-only	Device physical location.
STR upsDevicePart	1.3.6.1.4.1.6574.4.1.8	DisplayString	read-only	Device part number.
STR upsDeviceMACAddr	1.3.6.1.4.1.6574.4.1.9	DisplayString	read-only	Physical network address of the device.
upsInfo	1.3.6.1.4.1.6574.4.2
STR upsInfoStatus	1.3.6.1.4.1.6574.4.2.1	DisplayString	read-only	UPS status.
STR upsInfoAlarm	1.3.6.1.4.1.6574.4.2.2	DisplayString	read-only	UPS alarms
STR upsInfoTime	1.3.6.1.4.1.6574.4.2.3	DisplayString	read-only	Internal UPS clock time
STR upsInfoDate	1.3.6.1.4.1.6574.4.2.4	DisplayString	read-only	Internal UPS clock date
STR upsInfoModel	1.3.6.1.4.1.6574.4.2.5	DisplayString	read-only	UPS model
upsInfoMfr	1.3.6.1.4.1.6574.4.2.6
STR upsInfoMfrName	1.3.6.1.4.1.6574.4.2.6.1	DisplayString	read-only	UPS manufacturer
STR upsInfoMfrDate	1.3.6.1.4.1.6574.4.2.6.2	DisplayString	read-only	UPS manufacturing date
STR upsInfoSerial	1.3.6.1.4.1.6574.4.2.7	DisplayString	read-only	UPS serial number
STR upsInfoVendorID	1.3.6.1.4.1.6574.4.2.8	DisplayString	read-only	Vendor ID for USB devices
STR upsInfoProductID	1.3.6.1.4.1.6574.4.2.9	DisplayString	read-only	Product ID for USB devices
upsInfoFirmware	1.3.6.1.4.1.6574.4.2.10
STR upsInfoFirmwareName	1.3.6.1.4.1.6574.4.2.10.1	DisplayString	read-only	UPS firmware
STR upsInfoFirmwareAux	1.3.6.1.4.1.6574.4.2.10.2	DisplayString	read-only	Auxiliary device firmware
FLO upsInfoTemperature	1.3.6.1.4.1.6574.4.2.11	Float	read-only	UPS temperature (degrees C)
upsInfoLoad	1.3.6.1.4.1.6574.4.2.12
FLO upsInfoLoadValue	1.3.6.1.4.1.6574.4.2.12.1	Float	read-only	Load on UPS (percent)
FLO upsInfoLoadHigh	1.3.6.1.4.1.6574.4.2.12.2	Float	read-only	Load when UPS switches to overload condition (OVER) (percent)
STR upsInfoID	1.3.6.1.4.1.6574.4.2.13	DisplayString	read-only	UPS system identifier
upsInfoDelay	1.3.6.1.4.1.6574.4.2.14
NUM upsInfoDelayStart	1.3.6.1.4.1.6574.4.2.14.1	NonNegativeInteger	read-only	Interval to wait before restarting the load (seconds)
NUM upsInfoDelayReboot	1.3.6.1.4.1.6574.4.2.14.2	NonNegativeInteger	read-only	Interval to wait before rebooting the UPS (seconds)
NUM upsInfoDelayShutdown	1.3.6.1.4.1.6574.4.2.14.3	NonNegativeInteger	read-only	Interval to wait after shutdown with delay command (seconds)
upsInfoTimer	1.3.6.1.4.1.6574.4.2.15
NUM upsInfoTimerStart	1.3.6.1.4.1.6574.4.2.15.1	NonNegativeInteger	read-only	Time before the load will be started (seconds)
NUM upsInfoTimerReboot	1.3.6.1.4.1.6574.4.2.15.2	NonNegativeInteger	read-only	Time before the load will be rebooted (seconds)
NUM upsInfoTimerShutdown	1.3.6.1.4.1.6574.4.2.15.3	NonNegativeInteger	read-only	Time before the load will be shutdown (seconds)
upsInfoTest	1.3.6.1.4.1.6574.4.2.16
NUM upsInfoTestInterval	1.3.6.1.4.1.6574.4.2.16.1	NonNegativeInteger	read-only	Interval between self tests
STR upsInfoTestResult	1.3.6.1.4.1.6574.4.2.16.2	DisplayString	read-only	Results of last self test
STR upsInfoDisplayLanguage	1.3.6.1.4.1.6574.4.2.17	DisplayString	read-only	Language to use on front panel
STR upsInfoContacts	1.3.6.1.4.1.6574.4.2.18	DisplayString	read-only	UPS external contact sensors
NUM upsInfoEffciency	1.3.6.1.4.1.6574.4.2.19	NonNegativeInteger	read-only	Efficiency of the UPS (ratio of the output current on the input current) (percent)
upsInfoPower	1.3.6.1.4.1.6574.4.2.20
FLO upsInfoPowerValue	1.3.6.1.4.1.6574.4.2.20.1	Float	read-only	Current value of apparent power (Volt-Amps)
FLO upsInfoPowerNominal	1.3.6.1.4.1.6574.4.2.20.2	Float	read-only	Nominal value of apparent power (Volt-Amps)
upsInfoRealPower	1.3.6.1.4.1.6574.4.2.21
FLO upsInfoRealPowerValue	1.3.6.1.4.1.6574.4.2.21.1	Float	read-only	Current value of real power (Watts)
FLO upsInfoRealPowerNominal	1.3.6.1.4.1.6574.4.2.21.2	Float	read-only	Nominal value of real power (Watts)
STR upsInfoBeeperStatus	1.3.6.1.4.1.6574.4.2.22	DisplayString	read-only	UPS beeper status (enabled, disabled or muted)
STR upsInfoType	1.3.6.1.4.1.6574.4.2.23	DisplayString	read-only	UPS type
STR upsInfoWatchdogStatus	1.3.6.1.4.1.6574.4.2.24	DisplayString	read-only	UPS watchdog status (enabled or disabled)
upsInfoStart	1.3.6.1.4.1.6574.4.2.25
STR upsInfoStartAuto	1.3.6.1.4.1.6574.4.2.25.1	DisplayString	read-only	UPS starts when mains is (re)applied
STR upsInfoStartBattery	1.3.6.1.4.1.6574.4.2.25.2	DisplayString	read-only	Allow to start UPS from battery
STR upsInfoStartReboot	1.3.6.1.4.1.6574.4.2.25.3	DisplayString	read-only	UPS coldstarts from battery (enabled or disabled)
upsBattery	1.3.6.1.4.1.6574.4.3
upsBatteryCharge	1.3.6.1.4.1.6574.4.3.1
FLO upsBatteryChargeValue	1.3.6.1.4.1.6574.4.3.1.1	Float	read-only	Battery charge
FLO upsBatteryChargeLow	1.3.6.1.4.1.6574.4.3.1.2	Float	read-only	Remaining battery level when UPS switches to LB (percent)
FLO upsBatteryChargeRestart	1.3.6.1.4.1.6574.4.3.1.3	Float	read-only	Minimum battery level for UPS restart after power-off
FLO upsBatteryChargeWarning	1.3.6.1.4.1.6574.4.3.1.4	Float	read-only	Battery level when UPS switches to Warning state (percent)
upsBatteryVoltage	1.3.6.1.4.1.6574.4.3.2
FLO upsBatteryVoltageValue	1.3.6.1.4.1.6574.4.3.2.1	Float	read-only	The magnitude of the present battery voltage.
FLO upsBatteryVoltageNominal	1.3.6.1.4.1.6574.4.3.2.2	Float	read-only	Nominal battery voltage.
FLO upsBatteryVoltageLow	1.3.6.1.4.1.6574.4.3.2.3	Float	read-only	Minimum battery voltage, that triggers FSD status .
FLO upsBatteryVoltageHigh	1.3.6.1.4.1.6574.4.3.2.4	Float	read-only	Maximum battery voltage (Ie battery.charge = 100).
FLO upsBatteryCapacity	1.3.6.1.4.1.6574.4.3.3	Float	read-only	Battery capacity (Ah)
FLO upsBatteryCurrent	1.3.6.1.4.1.6574.4.3.4	Float	read-only	The present battery current.
FLO upsBatteryTemperature	1.3.6.1.4.1.6574.4.3.5	Float	read-only	The ambient temperature at or near the UPS Battery casing.
upsBatteryRuntime	1.3.6.1.4.1.6574.4.3.6
NUM upsBatteryRuntimeValue	1.3.6.1.4.1.6574.4.3.6.1	NonNegativeInteger	read-only	Battery runtime (seconds)
NUM upsBatteryRuntimeLow	1.3.6.1.4.1.6574.4.3.6.2	NonNegativeInteger	read-only	Remaining battery runtime when UPS switches to LB (seconds)
NUM upsBatteryRuntimeRestart	1.3.6.1.4.1.6574.4.3.6.3	NonNegativeInteger	read-only	Minimum battery runtime for UPS restart after power-off (seconds)
STR upsBatteryAlarmThreshold	1.3.6.1.4.1.6574.4.3.7	DisplayString	read-only	Battery alarm threshold
STR upsBatteryDate	1.3.6.1.4.1.6574.4.3.8	DisplayString	read-only	Battery change date
STR upsBatteryMfrDate	1.3.6.1.4.1.6574.4.3.9	DisplayString	read-only	Battery manufacturing date
NUM upsBatteryPacks	1.3.6.1.4.1.6574.4.3.10	NonNegativeInteger	read-only	Number of battery packs
NUM upsBatteryPacksBad	1.3.6.1.4.1.6574.4.3.11	NonNegativeInteger	read-only	Number of bad battery packs
STR upsBatteryType	1.3.6.1.4.1.6574.4.3.12	DisplayString	read-only	Battery chemistry
STR upsBatteryProtection	1.3.6.1.4.1.6574.4.3.13	DisplayString	read-only	Prevent deep discharge of battery
STR upsBatteryEnergySave	1.3.6.1.4.1.6574.4.3.14	DisplayString	read-only	Switch off when running on battery and no/low load
upsInput	1.3.6.1.4.1.6574.4.4
upsInputVoltage	1.3.6.1.4.1.6574.4.4.1
FLO upsInputVoltageValue	1.3.6.1.4.1.6574.4.4.1.1	Float	read-only	Input voltage
FLO upsInputVoltageMax	1.3.6.1.4.1.6574.4.4.1.2	Float	read-only	Maximum incoming voltage seen
FLO upsInputVoltageMin	1.3.6.1.4.1.6574.4.4.1.3	Float	read-only	Minimum incoming voltage seen
FLO upsInputVoltageNominal	1.3.6.1.4.1.6574.4.4.1.4	Float	read-only	Nominal input voltage
STR upsInputVoltageExtend	1.3.6.1.4.1.6574.4.4.1.5	DisplayString	read-only	Extended input voltage range
FLO upsInputVoltageFault	1.3.6.1.4.1.6574.4.4.1.6	Float	read-only	Input voltage Fault
upsInputTransfer	1.3.6.1.4.1.6574.4.4.2
STR upsInputTransferReason	1.3.6.1.4.1.6574.4.4.2.1	DisplayString	read-only	Reason for last transfer to battery
FLO upsInputTransferLow	1.3.6.1.4.1.6574.4.4.2.2	Float	read-only	Low voltage transfer point
FLO upsInputTransferHigh	1.3.6.1.4.1.6574.4.4.2.3	Float	read-only	High voltage transfer point
FLO upsInputTransferLowMin	1.3.6.1.4.1.6574.4.4.2.4	Float	read-only	smallest settable low voltage transfer point
FLO upsInputTransferLowMax	1.3.6.1.4.1.6574.4.4.2.5	Float	read-only	greatest settable low voltage transfer point
FLO upsInputTransferHighMin	1.3.6.1.4.1.6574.4.4.2.6	Float	read-only	smallest settable high voltage transfer point
FLO upsInputTransferHighMax	1.3.6.1.4.1.6574.4.4.2.7	Float	read-only	greatest settable high voltage transfer point
FLO upsInputTransferBoostLow	1.3.6.1.4.1.6574.4.4.2.8	Float	read-only	Low voltage boosting transfer point
FLO upsInputTransferBoostHigh	1.3.6.1.4.1.6574.4.4.2.9	Float	read-only	High voltage boosting transfer point
FLO upsInputTransferTrimLow	1.3.6.1.4.1.6574.4.4.2.10	Float	read-only	Low voltage trimming transfer point
FLO upsInputTransferTrimHigh	1.3.6.1.4.1.6574.4.4.2.11	Float	read-only	High voltage trimming transfer point
STR upsInputSensitivity	1.3.6.1.4.1.6574.4.4.3	DisplayString	read-only	Input power sensitivity
STR upsInputQuality	1.3.6.1.4.1.6574.4.4.4	DisplayString	read-only	Input power quality
upsInputCurrent	1.3.6.1.4.1.6574.4.4.5
FLO upsInputCurrentValue	1.3.6.1.4.1.6574.4.4.5.1	Float	read-only	Input current (A)
FLO upsInputCurrentNominal	1.3.6.1.4.1.6574.4.4.5.2	Float	read-only	Nominal input current (A)
upsInputFrequency	1.3.6.1.4.1.6574.4.4.6
FLO upsInputFrequencyValue	1.3.6.1.4.1.6574.4.4.6.1	Float	read-only	Input line frequency (Hz)
FLO upsInputFrequencyNominal	1.3.6.1.4.1.6574.4.4.6.2	Float	read-only	Nominal input line frequency (Hz)
FLO upsInputFrequencyLow	1.3.6.1.4.1.6574.4.4.6.3	Float	read-only	Input line frequency low (Hz)
FLO upsInputFrequencyHigh	1.3.6.1.4.1.6574.4.4.6.4	Float	read-only	Input line frequency high (Hz)
STR upsInputFrequencyExtend	1.3.6.1.4.1.6574.4.4.6.5	DisplayString	read-only	Extended input frequency range
upsOutput	1.3.6.1.4.1.6574.4.5
upsOutputVoltage	1.3.6.1.4.1.6574.4.5.1
FLO upsOutputVoltageValue	1.3.6.1.4.1.6574.4.5.1.1	Float	read-only	Output voltage (V)
FLO upsOutputVoltageNominal	1.3.6.1.4.1.6574.4.5.1.2	Float	read-only	Nominal output voltage (V)
upsOutputFrequency	1.3.6.1.4.1.6574.4.5.2
FLO upsOutputFrequencyValue	1.3.6.1.4.1.6574.4.5.2.1	Float	read-only	Output frequency (Hz)
FLO upsOutputFrequencyNominal	1.3.6.1.4.1.6574.4.5.2.2	Float	read-only	Nominal output frequency (Hz)
upsOutputCurrent	1.3.6.1.4.1.6574.4.5.3
FLO upsOutputCurrentValue	1.3.6.1.4.1.6574.4.5.3.1	Float	read-only	Output current (A)
FLO upsOutputCurrentNominal	1.3.6.1.4.1.6574.4.5.3.2	Float	read-only	Nominal output current (A)
upsAmbient	1.3.6.1.4.1.6574.4.6
upsAmbientTemperature	1.3.6.1.4.1.6574.4.6.1
FLO upsAmbientTemperatureValue	1.3.6.1.4.1.6574.4.6.1.1	Float	read-only	Ambient temperature (degrees C)
STR upsAmbientTemperatureAlarm	1.3.6.1.4.1.6574.4.6.1.2	DisplayString	read-only	Temperature alarm (enabled/disabled)
FLO upsAmbientTemperatureHigh	1.3.6.1.4.1.6574.4.6.1.3	Float	read-only	Temperature threshold high (degrees C)
FLO upsAmbientTemperatureLow	1.3.6.1.4.1.6574.4.6.1.4	Float	read-only	Temperature threshold low (degrees C)
FLO upsAmbientTemperatureMax	1.3.6.1.4.1.6574.4.6.1.5	Float	read-only	Maximum temperature seen (degrees C)
FLO upsAmbientTemperatureMin	1.3.6.1.4.1.6574.4.6.1.6	Float	read-only	Minimum temperature seen (degrees C)
upsAmbientHumidity	1.3.6.1.4.1.6574.4.6.2
FLO upsAmbientHumidityValue	1.3.6.1.4.1.6574.4.6.2.1	Float	read-only	Ambient relative humidity (percent)
STR upsAmbientHumidityAlarm	1.3.6.1.4.1.6574.4.6.2.2	DisplayString	read-only	Relative humidity alarm (enabled/disabled)
FLO upsAmbientHumidityHigh	1.3.6.1.4.1.6574.4.6.2.3	Float	read-only	Relative humidity threshold high (percent)
FLO upsAmbientHumidityLow	1.3.6.1.4.1.6574.4.6.2.4	Float	read-only	Relative humidity threshold low (percent)
FLO upsAmbientHumidityMax	1.3.6.1.4.1.6574.4.6.2.5	Float	read-only	Maximum relative humidity seen (percent)
FLO upsAmbientHumidityMin	1.3.6.1.4.1.6574.4.6.2.6	Float	read-only	Minimum relative humidity seen (percent)
upsDriver	1.3.6.1.4.1.6574.4.7
STR upsDriverName	1.3.6.1.4.1.6574.4.7.1	DisplayString	read-only	Driver name
STR upsDriverVersion	1.3.6.1.4.1.6574.4.7.2	DisplayString	read-only	Driver version (NUT release)
STR upsDriverVersionData	1.3.6.1.4.1.6574.4.7.3	DisplayString	read-only	Driver version data
STR upsDriverVersionInternal	1.3.6.1.4.1.6574.4.7.4	DisplayString	read-only	Internal driver version (if tracked separately)
I32 upsDriverPollInterval	1.3.6.1.4.1.6574.4.7.5	Integer32	read-only	Poll interval setup in configuration file
STR upsDriverPort	1.3.6.1.4.1.6574.4.7.6	DisplayString	read-only	Port setup in configuration file
I32 upsDriverPollFrequency	1.3.6.1.4.1.6574.4.7.7	Integer32	read-only	Poll frequency
STR upsDriverProductID	1.3.6.1.4.1.6574.4.7.8	DisplayString	read-only	Product ID
STR upsDriverSnmpVersion	1.3.6.1.4.1.6574.4.7.9	DisplayString	read-only	Snmp version
upsServer	1.3.6.1.4.1.6574.4.8
STR upsServerInfo	1.3.6.1.4.1.6574.4.8.1	DisplayString	read-only	Server information
STR upsServerVersion	1.3.6.1.4.1.6574.4.8.2	DisplayString	read-only	Server version
upsConformance	1.3.6.1.4.1.6574.4.9
upsCompliances	1.3.6.1.4.1.6574.4.9.1
upsCompliance	1.3.6.1.4.1.6574.4.9.1.1			The compliance statement for synoSystem entities which implement the SYNOLOGY SYSTEM MIB.
upsGroups	1.3.6.1.4.1.6574.4.9.2
upsGroup	1.3.6.1.4.1.6574.4.9.2.1			A collection of objects providing basic information of an synology ups entity.

RFC description

Synology NAS UPS (Uninterruptible Power Supply) management MIB; monitors UPS status, battery health, and power events on Synology systems.

Start monitoring Synology NAS with attached UPS device (UPS identity/power/battery status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SYNOLOGY-UPS-MIB

What Is SYNOLOGY-UPS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description