All MIBs › SYNOLOGY-UPS-MIB › upsInfoStartAuto
upsInfoStartAuto
Module: SYNOLOGY-UPS-MIB
OID (symbolic): SYNOLOGY-UPS-MIB::upsInfoStartAuto
OID (numeric): 1.3.6.1.4.1.6574.4.2.25.1
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: UPS starts when mains is (re)applied
What is upsInfoStartAuto?
Whether the UPS is configured to automatically power the load back on when mains power is (re)applied after an outage.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6574.4.2.25.1 snmpwalk -v2c -c public <target> SYNOLOGY-UPS-MIB::upsInfoStartAuto
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6574.4.2.25.1.1 snmpget -v2c -c public <target> SYNOLOGY-UPS-MIB::upsInfoStartAuto.1
Start monitoring Synology NAS with attached UPS device (UPS identity/power/battery status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SYNOLOGY-UPS-MIB::upsInfoStartAuto OID value, configure state conditions and alerts, and monitor any Synology NAS with attached UPS device (UPS identity/power/battery status) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6574 | synology | SYNOLOGY-DISK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6574.4 | synoUPS | SYNOLOGY-UPS-MIB |
| 1.3.6.1.4.1.6574.4.2 | upsInfo | SYNOLOGY-UPS-MIB |
| 1.3.6.1.4.1.6574.4.2.25 | upsInfoStart | SYNOLOGY-UPS-MIB |
| 1.3.6.1.4.1.6574.4.2.25.1 | upsInfoStartAuto | SYNOLOGY-UPS-MIB |