SWAPCOM-SCC

All MIBs › SWAPCOM-SCC

Organization: Organization name

Last Updated: 2020-07-38

Category: Power and UPS, Switch Management - General, Vendor-Specific Device Management

Description: Manages SWAPCOM SCC power control units, outlet state, and switched power distribution.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SWAPCOM-SCC?

SWAPCOM-SCC is a proprietary module for a SWAPCOM system/switch control card (SCC) platform, and while its name suggests switched power distribution, the concrete objects available describe platform status, software version tracking, and an internal transaction manager. It exposes platform identity and operational status, product name/version/build information, and counts of active and long-running internal transactions. Its monitoring emphasis covers both software status and operational health - platformPlatformStatus reports the card's own operating state, versionProductVersion/versionBuildNumber/versionBuildDate let an operator verify running firmware/software matches an expected release, and the transactionManager counters expose internal processing load, with a transaction exceeding the configured long-transaction threshold indicating a stuck or slow internal operation. No formal external MIB dependency is evident from the available data; it appears to be a self-contained proprietary enterprise module. It is deployed on SWAPCOM system/switch control card equipment, typically in telecom or power-control/switching platforms, for platform-health and internal software-processing monitoring. Engineers can download the SWAPCOM-SCC file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SWAPCOM-SCC. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SWAPCOM system/switch control card (SCC) equipment

Monitoring Examples

An administrator polls platformPlatformStatus to confirm the SCC card reports a healthy operating state, and checks versionTable/versionEntry rows for versionProductName, versionProductVersion, versionBuildNumber, and versionBuildDate to verify the running software matches an expected release. transactionManagerActiveTransactionCurrentCount compared against transactionManagerActiveTransactionMinCount/MaxCount shows whether internal transaction load is within normal bounds. A transaction exceeding transactionManagerLongTransactionThreshold indicates a stuck or abnormally slow internal operation warranting investigation.

What Can Be Monitored

platform operational status
software product name and version
build number and date
active transaction count
long-running transaction detection

Imported Objects

From SNMPv2-SMI

Counter32
Counter64
Gauge32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
StorageType
TestAndIncr
TimeInterval
TruthValue

How to Use in IPNetwork Monitor

Example using platformPlatformStatus OID:

Select an SWAPCOM system/switch control card (SCC) equipment (platform status/software version) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type platformPlatformStatus into the Find box to locate it in the OID tree, then select it and click OK. Status of local platform (0=Initializing / 1=Platform initialized / 2=Domains initialized / 3=Platform started and ready. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than '3 (platform started and ready)', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
OCT alarmProbeAlertSource	1.3.6.1.4.1.11308.3.12.1.2	OCTET STRING	read-only	Source of the probe alarm
OCT alarmProbeAlertType	1.3.6.1.4.1.11308.3.12.1.1	OCTET STRING	read-only	Type of the probe alarm
alarmProbeEntry	1.3.6.1.4.1.11308.3.12.1		not-accessible	The entry for alarmProbeTable
STR alarmProbeLastSeverityChange	1.3.6.1.4.1.11308.3.12.1.4	DisplayString	read-only	Date of the last severity value change
INT alarmProbeSeverity	1.3.6.1.4.1.11308.3.12.1.3	INTEGER	read-only	Current severity of the probe
alarmProbeTable	1.3.6.1.4.1.11308.3.12		not-accessible	Alarm probes status of the platform
asynchronousEventQueueEntry	1.3.6.1.4.1.11308.3.22.1		not-accessible	The entry for asynchronousEventQueueTable
U32 asynchronousEventQueueEventProcessingCumulativeTime	1.3.6.1.4.1.11308.3.22.1.7	Unsigned32	read-only	Cumulated time of event processing
U32 asynchronousEventQueueEventProcessingMaxTime	1.3.6.1.4.1.11308.3.22.1.9	Unsigned32	read-only	Maximum event processing time
U32 asynchronousEventQueueEventProcessingMinTime	1.3.6.1.4.1.11308.3.22.1.8	Unsigned32	read-only	Minimum event processing time
INT asynchronousEventQueueFailedEventCumulativeCount	1.3.6.1.4.1.11308.3.22.1.10	INTEGER	read-only	Number of asynchronous events in the 'failed' queue
STR asynchronousEventQueueFailedEventLastError	1.3.6.1.4.1.11308.3.22.1.11	DisplayString	read-only	Last error message of events process failure
INT asynchronousEventQueueInsertedEventCumulativeCount	1.3.6.1.4.1.11308.3.22.1.2	INTEGER	read-only	Number of generated asynchronous events
OCT asynchronousEventQueuePlatformId	1.3.6.1.4.1.11308.3.22.1.1	OCTET STRING	read-only	Identifier of the platform events queue
INT asynchronousEventQueueProcessedEventCumulativeCount	1.3.6.1.4.1.11308.3.22.1.6	INTEGER	read-only	Number of successfully sent asynchronous events
asynchronousEventQueueTable	1.3.6.1.4.1.11308.3.22		not-accessible	Asynchronous event queues status
INT asynchronousEventQueueWaitingEventCurrentCount	1.3.6.1.4.1.11308.3.22.1.3	INTEGER	read-only	Number of events that are pending in the send queue
INT asynchronousEventQueueWaitingEventMaxCount	1.3.6.1.4.1.11308.3.22.1.5	INTEGER	read-only	Maximum number of events pending in the send queue
INT asynchronousEventQueueWaitingEventMinCount	1.3.6.1.4.1.11308.3.22.1.4	INTEGER	read-only	Minimum number of events pending in the send queue
dod	1.3.6
enterprises	1.3.6.1.4.1
internet	1.3.6.1
lockManager	1.3.6.1.4.1.11308.3.4
INT lockManagerBlockedTransactionCurrentCount	1.3.6.1.4.1.11308.3.4.7	INTEGER	read-only	Number of currently blocked transaction in lockmanager
INT lockManagerBlockedTransactionMaxCount	1.3.6.1.4.1.11308.3.4.9	INTEGER	read-only	Maximum number of blocked transaction in lockmanager
INT lockManagerBlockedTransactionMinCount	1.3.6.1.4.1.11308.3.4.8	INTEGER	read-only	Minimum number of blocked transaction in lockmanager
INT lockManagerLockedItemCumulativeCount	1.3.6.1.4.1.11308.3.4.1	INTEGER	read-only	Number of lock acquired
INT lockManagerLockedItemCurrentCount	1.3.6.1.4.1.11308.3.4.2	INTEGER	read-only	Number of currenty locked objects
INT lockManagerLockedItemMaxCount	1.3.6.1.4.1.11308.3.4.4	INTEGER	read-only	Maximum number of locked objects
INT lockManagerLockedItemMinCount	1.3.6.1.4.1.11308.3.4.3	INTEGER	read-only	Minimum number of locked objects
INT lockManagerLockRejectedOnDeadlockCumulativeCount	1.3.6.1.4.1.11308.3.4.5	INTEGER	read-only	Number of lock rejected on deadlock
INT lockManagerLockRejectedOnTimeoutCumulativeCount	1.3.6.1.4.1.11308.3.4.6	INTEGER	read-only	Number of lock rejected on timeout
org	1.3
platform	1.3.6.1.4.1.11308.3.1
OCT platformPlatformId	1.3.6.1.4.1.11308.3.1.1	OCTET STRING	read-only	Identifier of the local platform
INT platformPlatformStatusEx	1.3.6.1.4.1.11308.3.1.2	INTEGER	read-only	Status of local platform (0=Initializing / 1=Platform initialized / 2=Domains initialized / 3=Platform started and ready
private	1.3.6.1.4
remotePlatformEntry	1.3.6.1.4.1.11308.3.21.1		not-accessible	The entry for remotePlatformTable
OCT remotePlatformPlatformId	1.3.6.1.4.1.11308.3.21.1.1	OCTET STRING	read-only	Identifier of the remote platform
OCT remotePlatformPlatformProtocol	1.3.6.1.4.1.11308.3.21.1.2	OCTET STRING	read-only	Protocol used to communicate with the remote platform
INT remotePlatformRemotePlatformStatus	1.3.6.1.4.1.11308.3.21.1.3	INTEGER	read-only	Status of the remote platform connection (-2=unknown / -1=down / 3=up)
remotePlatformTable	1.3.6.1.4.1.11308.3.21		not-accessible	Remote platform connected to this one
scc	1.3.6.1.4.1.11308.3
schedulerTaskEntry	1.3.6.1.4.1.11308.3.5.1		not-accessible	The entry for schedulerTaskTable
INT schedulerTaskExecutionCumulativeCount	1.3.6.1.4.1.11308.3.5.1.3	INTEGER	read-only	Number of executions succesfully done
U32 schedulerTaskExecutionCumulativeTime	1.3.6.1.4.1.11308.3.5.1.4	Unsigned32	read-only	Cumulative processing time (success and failure)
STR schedulerTaskExecutionLastError	1.3.6.1.4.1.11308.3.5.1.8	DisplayString	read-only	Message of the last execution failure
U32 schedulerTaskExecutionMaxTime	1.3.6.1.4.1.11308.3.5.1.6	Unsigned32	read-only	Maximum processing time of the task
U32 schedulerTaskExecutionMinTime	1.3.6.1.4.1.11308.3.5.1.5	Unsigned32	read-only	Minimum processing time of the task
INT schedulerTaskExecutionRetryCurrentCount	1.3.6.1.4.1.11308.3.5.1.7	INTEGER	read-only	Number of execution failure
OCT schedulerTaskName	1.3.6.1.4.1.11308.3.5.1.1	OCTET STRING	read-only	Name of the task
T/F schedulerTaskRunning	1.3.6.1.4.1.11308.3.5.1.2	TruthValue	read-only	Indicate if the task is currenlty being executed
schedulerTaskTable	1.3.6.1.4.1.11308.3.5		not-accessible	Status of tasks registered in the scheduler
slsConnection	1.3.6.1.4.1.11308.3.23
T/F slsConnectionConnected	1.3.6.1.4.1.11308.3.23.1	TruthValue	read-only	Indicate if the platform is connected to the SLS
INT slsConnectionLicenseCheckFailedCumulativeCount	1.3.6.1.4.1.11308.3.23.3	INTEGER	read-only	Number of failed license check
STR slsConnectionLicenseCheckLastError	1.3.6.1.4.1.11308.3.23.4	DisplayString	read-only	Last error message that occured in the SLS connection
INT slsConnectionLicenseCheckSuccessCumulativeCount	1.3.6.1.4.1.11308.3.23.2	INTEGER	read-only	Number of successfull license check
STR sqlPoolXACheckedOutConnectionAverageTime	1.3.6.1.4.1.11308.3.24.1.23	DisplayString	read-only	Connection checkedout average time (equals to CheckedOutConnectionCumulativeTime divided by CheckedOutConnectionCumulativeCount
INT sqlPoolXACheckedOutConnectionCumulativeCount	1.3.6.1.4.1.11308.3.24.1.19	INTEGER	read-only	Number of checkout performed from pool
U32 sqlPoolXACheckedOutConnectionCumulativeTime	1.3.6.1.4.1.11308.3.24.1.20	Unsigned32	read-only	Cumulation of time that the connections are checked out from the pool
INT sqlPoolXACheckedOutConnectionCurrentCount	1.3.6.1.4.1.11308.3.24.1.16	INTEGER	read-only	Current number of connection that are checked out from the pool
INT sqlPoolXACheckedOutConnectionMaxCount	1.3.6.1.4.1.11308.3.24.1.18	INTEGER	read-only	Maximum number of simultaneous checked out connections reached by the pool
U32 sqlPoolXACheckedOutConnectionMaxTime	1.3.6.1.4.1.11308.3.24.1.22	Unsigned32	read-only	Maximum time that a connection has been checked out from the pool
INT sqlPoolXACheckedOutConnectionMinCount	1.3.6.1.4.1.11308.3.24.1.17	INTEGER	read-only	Minimum number of simultaneous checked out connections reached by the pool
U32 sqlPoolXACheckedOutConnectionMinTime	1.3.6.1.4.1.11308.3.24.1.21	Unsigned32	read-only	Minimum time that a connection has been checked out from the pool
U32 sqlPoolXACheckIsClosedInterval	1.3.6.1.4.1.11308.3.24.1.9	Unsigned32	read-only	Minimum time between two connection checking
INT sqlPoolXAConnectionCurrentCount	1.3.6.1.4.1.11308.3.24.1.13	INTEGER	read-only	Current size of the connection pool
INT sqlPoolXAConnectionMaxCount	1.3.6.1.4.1.11308.3.24.1.15	INTEGER	read-only	Maximum size reached by the connection pool
INT sqlPoolXAConnectionMinCount	1.3.6.1.4.1.11308.3.24.1.14	INTEGER	read-only	Minimum size reached by the connection pool
INT sqlPoolXACreateConnectionFailureCumulativeCount	1.3.6.1.4.1.11308.3.24.1.11	INTEGER	read-only	Number of connection creation failure
STR sqlPoolXACreateConnectionLastError	1.3.6.1.4.1.11308.3.24.1.12	DisplayString	read-only	Last exception message during checkout failure
INT sqlPoolXACreateConnectionSuccessCumulativeCount	1.3.6.1.4.1.11308.3.24.1.10	INTEGER	read-only	Number of connections succesfully created
OCT sqlPoolXADatabaseName	1.3.6.1.4.1.11308.3.24.1.3	OCTET STRING	read-only	Raw database name
OCT sqlPoolXADriverClassName	1.3.6.1.4.1.11308.3.24.1.5	OCTET STRING	read-only	Name of the JDBC driver class
OCT sqlPoolXADriverName	1.3.6.1.4.1.11308.3.24.1.4	OCTET STRING	read-only	Name of the JDBC driver
sqlPoolXAEntry	1.3.6.1.4.1.11308.3.24.1		not-accessible	The entry for sqlPoolXATable
U32 sqlPoolXAMaximumIdleTime	1.3.6.1.4.1.11308.3.24.1.7	Unsigned32	read-only	Maximum life duration of a connection in the pool
INT sqlPoolXAMaximumSize	1.3.6.1.4.1.11308.3.24.1.6	INTEGER	read-only	Maximum size of connection pool
U32 sqlPoolXAMaximumWaitTime	1.3.6.1.4.1.11308.3.24.1.8	Unsigned32	read-only	Maximum waiting time for getting a connection when the pool is exhausted
OCT sqlPoolXAName	1.3.6.1.4.1.11308.3.24.1.1	OCTET STRING	read-only	Name of the connection pool
OCT sqlPoolXASqlPlatformName	1.3.6.1.4.1.11308.3.24.1.2	OCTET STRING	read-only	Detected database type
sqlPoolXATable	1.3.6.1.4.1.11308.3.24		not-accessible	SQLPool status and properties
swapcom	1.3.6.1.4.1.11308			Description
transactionManager	1.3.6.1.4.1.11308.3.3
INT transactionManagerActiveTransactionCurrentCount	1.3.6.1.4.1.11308.3.3.2	INTEGER	read-only	Number of current active transaction
INT transactionManagerActiveTransactionMaxCount	1.3.6.1.4.1.11308.3.3.4	INTEGER	read-only	Maximum number of active transaction
INT transactionManagerActiveTransactionMinCount	1.3.6.1.4.1.11308.3.3.3	INTEGER	read-only	Minimum number of active transaction
INT transactionManagerCommittedTransactionCumulativeCount	1.3.6.1.4.1.11308.3.3.5	INTEGER	read-only	Number of transaction committed
U32 transactionManagerLongTransactionThreshold	1.3.6.1.4.1.11308.3.3.1	Unsigned32	read-only	Threshold duration for long transaction detection
INT transactionManagerRolledbackTransactionCumulativeCount	1.3.6.1.4.1.11308.3.3.6	INTEGER	read-only	Number of transaction rollbacked
U32 transactionManagerTransactionCumulativeTime	1.3.6.1.4.1.11308.3.3.7	Unsigned32	read-only	Cumulative transaction time
STR transactionManagerTransactionManagerLastError	1.3.6.1.4.1.11308.3.3.10	DisplayString	read-only	Last error message that occured in the transaction manager
U32 transactionManagerTransactionMaxTime	1.3.6.1.4.1.11308.3.3.9	Unsigned32	read-only	Maximum transaction duration time
U32 transactionManagerTransactionMinTime	1.3.6.1.4.1.11308.3.3.8	Unsigned32	read-only	Minimum transaction duration time
STR versionBuildDate	1.3.6.1.4.1.11308.3.2.1.4	DisplayString	read-only	Component build date
INT versionBuildNumber	1.3.6.1.4.1.11308.3.2.1.3	INTEGER	read-only	Component build number
versionEntry	1.3.6.1.4.1.11308.3.2.1		not-accessible	The entry for versionTable
OCT versionProductName	1.3.6.1.4.1.11308.3.2.1.1	OCTET STRING	read-only	Name of the component
OCT versionProductVersion	1.3.6.1.4.1.11308.3.2.1.2	OCTET STRING	read-only	Version of the component, follows the standard SWAPCOM versioning
versionTable	1.3.6.1.4.1.11308.3.2		not-accessible	Components version

RFC description

Swapcom SCC (System Control Card) platform MIB; vendor-private platform and service card management.

Start monitoring SWAPCOM system/switch control card (SCC) equipment (platform status/software version) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SWAPCOM-SCC