SONOMASYSTEMS-SONOMA-ATM-E3-MIB

All MIBs › SONOMASYSTEMS-SONOMA-ATM-E3-MIB

Category: ATM Interface Management, SonomaSystems ATM WAN Management

Description: Manages SonomaSystems ATM E3 interface configuration, cell statistics, and physical layer performance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONOMASYSTEMS-SONOMA-ATM-E3-MIB?

SONOMASYSTEMS-SONOMA-ATM-E3-MIB is a Sonoma Systems proprietary MIB (enterprise OID 2926) configuring E3 physical-layer ATM interfaces. Its configuration table, keyed by physical index, records framing type, GFC-bit insertion, bipolar I/O serialization, payload scrambling, overhead processing, HDB3 encoding, loopback, cable length, internal equalizer, filler-cell insertion, and clock-generation mode, while a statistics table reports loss-of-signal, loss-of-E3-frame, framing errors, HEC errors, excessive-modulo (EM) errors, far-end block errors, bipolar violations, and payload-type mismatches. As a configuration/performance MIB it lets an administrator confirm E3 line-coding/framing settings and watch for HEC/framing errors indicating a degrading ATM E3 link. It is deployed on Sonoma Systems ATM access equipment with E3 interfaces. Engineers can download the SONOMASYSTEMS-SONOMA-ATM-E3-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONOMASYSTEMS-SONOMA-ATM-E3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonoma Systems ATM access equipment (E3 interfaces)

Monitoring Examples

An administrator checks atmE3StatsHECErrors and atmE3StatsFrameErrors to catch a degrading ATM E3 link before it starts dropping cells on Sonoma Systems equipment.

What Can Be Monitored

E3 framing/HEC error counters

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From SONOMASYSTEMS-SONOMA-MIB

sonomaATM

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
sonomaE3ATMAdapterGroup	1.3.6.1.4.1.2926.25.7.3
atmE3ConfGroup	1.3.6.1.4.1.2926.25.7.3.1
atmE3ConfPhyTable	1.3.6.1.4.1.2926.25.7.3.1.1		not-accessible	A table of physical layer configuration for the E3 interface
atmE3ConfPhyEntry	1.3.6.1.4.1.2926.25.7.3.1.1.1		not-accessible	A entry in the table, containing information about the physical layer of a E3 interface
INT atmE3ConfPhysIndex	1.3.6.1.4.1.2926.25.7.3.1.1.1.1	INTEGER	read-only	The physical interface index.
INT atmE3ConfFraming	1.3.6.1.4.1.2926.25.7.3.1.1.1.2	INTEGER	read-only	Indicates the type of framing supported.
INT atmE3ConfInsGFCBits	1.3.6.1.4.1.2926.25.7.3.1.1.1.3	INTEGER	read-write	Enable/disable the insertion of GFC bits.
INT atmE3ConfSerBipolarIO	1.3.6.1.4.1.2926.25.7.3.1.1.1.4	INTEGER	read-write	Enable/disable bipolar serial I/O.
INT atmE3ConfPayloadScrambling	1.3.6.1.4.1.2926.25.7.3.1.1.1.5	INTEGER	read-write	Enable/disable payload scrambling.
INT atmE3ConfOverheadProcessing	1.3.6.1.4.1.2926.25.7.3.1.1.1.6	INTEGER	read-write	Enable/disable Overhead processing.
INT atmE3ConfHDB3Encoding	1.3.6.1.4.1.2926.25.7.3.1.1.1.7	INTEGER	read-write	Enable/disable HDB3 (High Density Bipolar 3) Encoding.
INT atmE3ConfLoopback	1.3.6.1.4.1.2926.25.7.3.1.1.1.8	INTEGER	read-write	This object is used to modify the state of internal loopback....
INT atmE3ConfCableLength	1.3.6.1.4.1.2926.25.7.3.1.1.1.9	INTEGER	read-write	Configure for the length of the cable.
INT atmE3ConfInternalEqualizer	1.3.6.1.4.1.2926.25.7.3.1.1.1.10	INTEGER	read-write	Configure to use or bypass the internal equalizer.
INT atmE3ConfFillerCells	1.3.6.1.4.1.2926.25.7.3.1.1.1.11	INTEGER	read-write	This parameter indicates the type of filler cells to send when there are no data cells.
INT atmE3ConfGenerateClock	1.3.6.1.4.1.2926.25.7.3.1.1.1.12	INTEGER	read-write	Enable/disable clock generation.
atmE3StatsGroup	1.3.6.1.4.1.2926.25.7.3.2
atmE3StatsTable	1.3.6.1.4.1.2926.25.7.3.2.1		not-accessible	A table of physical layer statistics information for the E3 interface
atmE3StatsEntry	1.3.6.1.4.1.2926.25.7.3.2.1.1		not-accessible	A entry in the table, containing information about the physical layer of a E3 interface
INT atmE3StatsPhysIndex	1.3.6.1.4.1.2926.25.7.3.2.1.1.1	INTEGER	read-only	The physical interface index.
CTR atmE3StatsNoSignals	1.3.6.1.4.1.2926.25.7.3.2.1.1.2	Counter	read-only	No signal error counter.
CTR atmE3StatsNoE3Frames	1.3.6.1.4.1.2926.25.7.3.2.1.1.3	Counter	read-only	No E3 frames error counter.
CTR atmE3StatsFrameErrors	1.3.6.1.4.1.2926.25.7.3.2.1.1.4	Counter	read-only	A count of the number of Frames in error.
CTR atmE3StatsHECErrors	1.3.6.1.4.1.2926.25.7.3.2.1.1.5	Counter	read-only	HEC (Header Error Check) error counter.
CTR atmE3StatsEMErrors	1.3.6.1.4.1.2926.25.7.3.2.1.1.6	Counter	read-only	EM (error monitoring) error counter.
CTR atmE3StatsFeBlockErrors	1.3.6.1.4.1.2926.25.7.3.2.1.1.7	Counter	read-only	Far End Block error counter.
CTR atmE3StatsBpvErrors	1.3.6.1.4.1.2926.25.7.3.2.1.1.8	Counter	read-only	Bipolar Violation error counter.
CTR atmE3StatsPayloadTypeMismatches	1.3.6.1.4.1.2926.25.7.3.2.1.1.9	Counter	read-only	Payload Type Mismatches error counter.
CTR atmE3StatsTimingMarkers	1.3.6.1.4.1.2926.25.7.3.2.1.1.10	Counter	read-only	Timing Markers error counter.
CTR atmE3StatsAISDetects	1.3.6.1.4.1.2926.25.7.3.2.1.1.11	Counter	read-only	AIS (Alarm Indication Signal) detect counter.
CTR atmE3StatsRDIDetects	1.3.6.1.4.1.2926.25.7.3.2.1.1.12	Counter	read-only	RDI (Remote Defect Indication) error counter.
INT atmE3StatsSignalLoss	1.3.6.1.4.1.2926.25.7.3.2.1.1.13	INTEGER	read-only	Signal loss indication.
INT atmE3StatsFrameLoss	1.3.6.1.4.1.2926.25.7.3.2.1.1.14	INTEGER	read-only	Frame loss indication.
INT atmE3StatsSyncLoss	1.3.6.1.4.1.2926.25.7.3.2.1.1.15	INTEGER	read-only	Synchronization loss counter.
INT atmE3StatsOutOfCell	1.3.6.1.4.1.2926.25.7.3.2.1.1.16	INTEGER	read-only	ATM out-of-cell delineation.
INT atmE3StatsFIFOOverflow	1.3.6.1.4.1.2926.25.7.3.2.1.1.17	INTEGER	read-only	ATM FIFO overflow.
INT atmE3StatsPayloadTypeMismatch	1.3.6.1.4.1.2926.25.7.3.2.1.1.18	INTEGER	read-only	The Payload Type Mismatch state.
INT atmE3StatsTimingMarker	1.3.6.1.4.1.2926.25.7.3.2.1.1.19	INTEGER	read-only	The Timing Marker state.
INT atmE3StatsAISDetect	1.3.6.1.4.1.2926.25.7.3.2.1.1.20	INTEGER	read-only	The AIS (Alarm Indication Signal) state.
INT atmE3StatsRDIDetect	1.3.6.1.4.1.2926.25.7.3.2.1.1.21	INTEGER	read-only	RDI (Remote Defect Indication) state.
INT atmE3StatsClearCounters	1.3.6.1.4.1.2926.25.7.3.2.1.1.22	INTEGER	read-write	Clear all counters in this group ONLY.

RFC description

Manages Sonoma ATM E3 interface configuration and statistics for E3 physical layer operation.

Start monitoring Sonoma Systems ATM access equipment, E3 interfaces (framing/HEC-error status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONOMASYSTEMS-SONOMA-ATM-E3-MIB

What Is SONOMASYSTEMS-SONOMA-ATM-E3-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description