SONOMASYSTEMS-SONOMA-TRNCPQ-MIB

All MIBs › SONOMASYSTEMS-SONOMA-TRNCPQ-MIB

Category: SonomaSystems ATM WAN Management

Description: Manages SonomaSystems Sonoma trunk capacity queue configuration and traffic scheduling.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONOMASYSTEMS-SONOMA-TRNCPQ-MIB?

SONOMASYSTEMS-SONOMA-TRNCPQ-MIB is a vendor-specific MIB from Sonoma Systems for their Sonoma product line, managing trunk capacity queue configuration and traffic scheduling, likely for telecom/voice trunk-group equipment. It exposes configuration objects controlling how trunk capacity is queued and scheduled, governing how calls or traffic are admitted onto or held for available trunk resources. Its monitoring focus is on traffic-management/software-configuration status rather than hardware sensors, letting an operator verify queue depth, scheduling parameters, and trunk-capacity utilization to catch congestion or misconfigured queuing that could cause dropped or delayed calls/traffic. There is no clear indication of dependency on other standard MIBs from the available information, suggesting it is a largely self-contained proprietary module. It is typically deployed in telecom/voice-trunking equipment environments where Sonoma Systems gear manages trunk-group capacity and call/traffic admission, and administrators can download the SONOMASYSTEMS-SONOMA-TRNCPQ-MIB file directly to load it into their MIB browser for configuration review.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONOMASYSTEMS-SONOMA-TRNCPQ-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonoma Systems Sonoma trunking equipment (telecom/voice trunk gateway)

Monitoring Examples

An operator would poll the trunk capacity queue's configuration and current queue-depth objects to see whether traffic is being held back due to insufficient trunk capacity, and review scheduling parameters to confirm traffic is prioritized as intended. No concrete sample objects were provided for this module, so exact table/object names cannot be confirmed, but a trunk-queue configuration/status table is the expected pattern given the short description. A persistently high or growing queue depth would indicate trunk-capacity exhaustion likely to cause call blocking or added latency. This MIB is used for trunk traffic-management status rather than general device hardware health.

What Can Be Monitored

trunk capacity queue depth
traffic scheduling configuration
trunk capacity utilization
queue configuration parameters

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
TimeTicks

From SONOMASYSTEMS-SONOMA-MIB

sonomaLAN

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
sonomaTokenRing	1.3.6.1.4.1.2926.25.5.2
tokenRingAdapterGroup	1.3.6.1.4.1.2926.25.5.2.1
trnCpqGroup	1.3.6.1.4.1.2926.25.5.2.1.1
trnCpqAdapterTable	1.3.6.1.4.1.2926.25.5.2.1.1.1		not-accessible	This table contains the configuration and status information for the Token Ring 4/16 adapter cards.
trnCpqAdapterEntry	1.3.6.1.4.1.2926.25.5.2.1.1.1.1		not-accessible	An entry in the table of configuration and status information for the Token Ring 4/16 adapter cards.
INT trnCpqAdapterIndex	1.3.6.1.4.1.2926.25.5.2.1.1.1.1.1	INTEGER	read-only	The adapter number which identifies the instance of this adapter in the Sonoma system.
INT trnCpqAdapterCheckState	1.3.6.1.4.1.2926.25.5.2.1.1.1.1.2	INTEGER	read-only	This object signifies the adapter check information when the AdapterCheck Interrupt has occured and the adapter is in a closed state waiting to be reset.
INT trnCpqAdapterOpenInWrapMode	1.3.6.1.4.1.2926.25.5.2.1.1.1.1.3	INTEGER	read-write	This enables the adapter to open in Wrap Mode. In order to set/reset this parameter, close the logical port, change the value and open the port.
INT trnCpqAdapterEarlyTokenRelease	1.3.6.1.4.1.2926.25.5.2.1.1.1.1.4	INTEGER	read-write	This enables the early token release . In order to set/reset this parameter, close the logical port, change the value and open the port.
PHY trnCpqAdapterGroupAddress	1.3.6.1.4.1.2926.25.5.2.1.1.1.1.5	PhysAddress	read-write	The Group address of the adapter.
INT trnCpqRingSpeedDetect	1.3.6.1.4.1.2926.25.5.2.1.1.1.1.6	INTEGER	read-write	This specifies whether during open operation the card should autodetect the ring speed or read the dot5RingSpeed value and try to insert into the ring.
INT trnCpqMtu	1.3.6.1.4.1.2926.25.5.2.1.1.1.1.7	INTEGER	read-write	This specifies the mtu for the adapter. The actual packet size may be less depending on other adapters in the unit. Changes will not take affect until the next reboot.
trnCpqAdapterCheckStatsTable	1.3.6.1.4.1.2926.25.5.2.1.1.2		not-accessible	A Table having Adapter Check statistics specific to the Sonoma TRNCPQ Token Ring Adapter Cards, one entry per card.
trnCpqAdapterCheckStatsEntry	1.3.6.1.4.1.2926.25.5.2.1.1.2.1		not-accessible	An entry contains the sonoma token ring adapter check statistics for a particular interface.
INT trnCpqAdapterCheckStatsIndex	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.1	INTEGER	read-only	The value of this object identifies the sonoma token ring adapter interface for which this entry contains management information.
CTR trnCpqAdapParityErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.2	Counter	read-only	The number of times the adapter detected a bus parity error on the adapter's internal bus.
CTR trnCpqIllOpCodeErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.3	Counter	read-only	The number of times the adapter's communications processor detected an illegal opcode in the adapter's internal program.
CTR trnCpqArithFaultErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.4	Counter	read-only	The number of times there was an arithmetic fault.
CTR trnCpqIllMemErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.5	Counter	read-only	The number of illegal memory access occured.
CTR trnCpqDIOParityErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.6	Counter	read-only	The number of times the adapter detected a bad parity on data passed from the attached system to the adapter through a direct I/O access.
CTR trnCpqDMAParityErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.7	Counter	read-only	The number of times the adapter aborted a DMA operation as a result of parity errors.
CTR trnCpqDMABusErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.8	Counter	read-only	The number of times the adapter aborted a DMA operation as a result of bus errors.
CTR trnCpqDMATimeoutErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.9	Counter	read-only	The number of times the adapter timed out waiting for the completion of a DMA operation.
CTR trnCpqInvIntrErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.10	Counter	read-only	The number of times an unrecognized error interrupt was generated.
CTR trnCpqInvXOPErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.11	Counter	read-only	The number of times an unrecognized XOP request was generated in the communications processor code.
CTR trnCpqRegParityErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.12	Counter	read-only	The number of times a parity error occured in the user register.
CTR trnCpqRAMFailErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.13	Counter	read-only	The number of times Extended RAM failure occured.
CTR trnCpqPHTxHaltErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.14	Counter	read-only	The number of times DMA was unable to be stopped.
CTR trnCpqPHTxRunErrors	1.3.6.1.4.1.2926.25.5.2.1.1.2.1.15	Counter	read-only	The number of internal DMA underruns when transmitting onto the ring.
trnCpqBUDStatsTable	1.3.6.1.4.1.2926.25.5.2.1.1.3		not-accessible	A Table having BUD statistics specific to the Sonoma TRNCPQ Token Ring Adapter Cards, one entry per card.
trnCpqBUDStatsEntry	1.3.6.1.4.1.2926.25.5.2.1.1.3.1		not-accessible	An entry contains the sonoma token ring adapter statistics for a particular interface.
INT trnCpqBUDStatsIndex	1.3.6.1.4.1.2926.25.5.2.1.1.3.1.1	INTEGER	read-only	The value of this object identifies the sonoma token ring adapter interface for which this entry contains management information.
CTR trnCpqInitialTestErrors	1.3.6.1.4.1.2926.25.5.2.1.1.3.1.2	Counter	read-only	Initial Test error during BUD.
CTR trnCpqChecksumErrors	1.3.6.1.4.1.2926.25.5.2.1.1.3.1.3	Counter	read-only	Checksum errors during BUD.
CTR trnCpqAdapterRAMErrors	1.3.6.1.4.1.2926.25.5.2.1.1.3.1.4	Counter	read-only	Adapter RAM errors during BUD.
CTR trnCpqInstructionTestErrors	1.3.6.1.4.1.2926.25.5.2.1.1.3.1.5	Counter	read-only	Instruction Test errors during BUD.
CTR trnCpqCtxtorIntrTestErrors	1.3.6.1.4.1.2926.25.5.2.1.1.3.1.6	Counter	read-only	Context or Interrupt test errors during BUD.
CTR trnCpqProtocolHandlerHWErrors	1.3.6.1.4.1.2926.25.5.2.1.1.3.1.7	Counter	read-only	Protocol handler hardware error during BUD.
CTR trnCpqSystemInterfaceRegErrors	1.3.6.1.4.1.2926.25.5.2.1.1.3.1.8	Counter	read-only	System Interface register error during BUD.
trnCpqInitStatsTable	1.3.6.1.4.1.2926.25.5.2.1.1.4		not-accessible	A Table having BUD and Initialization statistics specific to the Sonoma TRNCPQ Token Ring Adapter Cards, one entry per card.
trnCpqInitStatsEntry	1.3.6.1.4.1.2926.25.5.2.1.1.4.1		not-accessible	An entry contains the sonoma token ring adapter statistics for a particular interface.
INT trnCpqInitStatsIndex	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.1	INTEGER	read-only	The value of this object identifies the sonoma token ring adapter interface for which this entry contains management information.
CTR trnCpqInvInitBlocksErrors	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.2	Counter	read-only	The number of times the initialization parameter block was not transferred in full to the adapter.
CTR trnCpqInvInitOptionsErrors	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.3	Counter	read-only	The number of times the bit 0 was not 1 or the other bits were not 0 in the initialization parameter block.
CTR trnCpqNoResourcesErrors	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.4	Counter	read-only	The number of times there was insufficient adapter memory for the microcode.
CTR trnCpqInitAddressErrors	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.5	Counter	read-only	The number of times invalid hcb/hsb addresses caused an error during initialization.
CTR trnCpqInitDIOParityErrors	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.6	Counter	read-only	The number of times the adapter detected a bad parity on data passed from the attached system to the adapter through a direct I/O access, during initialization.
CTR trnCpqInitDMAParityErrors	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.7	Counter	read-only	The number of times the adapter aborted a DMA operation as a result of parity errors during initialization.
CTR trnCpqInitDMABusErrors	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.8	Counter	read-only	The number of times the adapter aborted a DMA operation as a result of bus errors during initialization.
CTR trnCpqInitDMATimeoutErrors	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.9	Counter	read-only	The number of times the adapter timed out waiting for the completion of a DMA operationduring initialization.
CTR trnCpqInitDMADataErrors	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.10	Counter	read-only	The number of times a DMA test failed because of data miscompare during initialization.
CTR trnCpqAdapterCheckErrors	1.3.6.1.4.1.2926.25.5.2.1.1.4.1.11	Counter	read-only	The number of times an unrecoverable hardware or software error occured during initialization.
trnCpqMiscStatsTable	1.3.6.1.4.1.2926.25.5.2.1.1.5		not-accessible	A Table having miscellaneous statistics specific to the Sonoma TRNCPQ Token Ring Adapter Cards, one entry per card.
trnCpqMiscStatsEntry	1.3.6.1.4.1.2926.25.5.2.1.1.5.1		not-accessible	An entry contains the sonoma token ring adapter statistics for a particular interface.
INT trnCpqMiscStatsIndex	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.1	INTEGER	read-only	The value of this object identifies the sonoma token ring adapter interface for which this entry contains management information.
CTR trnCpqCounterOverflowErrors	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.2	Counter	read-only	The number of times the adapter error counters have incremented from 254 to 255.
CTR trnCpqAutoRemovalErrors	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.3	Counter	read-only	The number of times the adapter has failed the lobe wrap test resulting from the beacon auto-removal process and has de-inserted from the ring.
CTR trnCpqFrameBigErrors	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.4	Counter	read-only	The number of times a received packet was discarded because the received frame was larger than Max_Frame_Size.
CTR trnCpqNoHostBufErrors	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.5	Counter	read-only	The number of times a received packet was discarded because there was no host buffer available in the Receive Structure Array.
CTR trnCpqAddressErrors	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.6	Counter	read-only	The number of times an error occured due to invalid addresses. This does not include errors that occur during initialization. Those errors are being handled in the BUD specific table.
CTR trnCpqAdapNotInsertedErrors	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.7	Counter	read-only	The number of times an operation failed because of the adapter not being inserted.
CTR trnCpqMiscRcvErrors	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.8	Counter	read-only	The number of times a receive error was detected by the microcode.
CTR trnCpqNoOfLinkResets	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.9	Counter	read-only	This object is a count of the number of resets which have occurred on this Token Ring link, since the last reinitialization of the unit.
INT trnCpqLastLinkResetReason	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.10	INTEGER	read-only	This object gives the a reason code for the last reset which occurred on this Token ring port. This object gives the reason code for the last reset which occurred on this LAN physical link. A value of noReason(1) is returned if the link has not reset. A value of management(2) is returned when a link reset has been caused by SNMP. A value of deviceError(3) is returned if the link reset was caused by a hardware failure.
TIK trnCpqTimeSinceLastLinkReset	1.3.6.1.4.1.2926.25.5.2.1.1.5.1.11	TimeTicks	read-only	This object gives the time (in hundreths of seconds) since the last link reset, eg. The time since the last link went down. The value of this object is zero if no link resets have occured since the last reinitialization of the unit.

RFC description

Monitors Sonoma Token Ring 4/16 adapter card configuration and status information.

Start monitoring Sonoma Systems Sonoma trunking equipment, telecom/voice trunk gateway (trunk-capacity queue/scheduling configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONOMASYSTEMS-SONOMA-TRNCPQ-MIB

What Is SONOMASYSTEMS-SONOMA-TRNCPQ-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description