SONOMASYSTEMS-SONOMA-ATM-OC3c-MIB

All MIBs › SONOMASYSTEMS-SONOMA-ATM-OC3c-MIB

Category: ATM Interface Management, SonomaSystems ATM WAN Management

Description: Handles configuration, cell throughput, and alarm status for SonomaSystems ATM OC-3c SONET interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONOMASYSTEMS-SONOMA-ATM-OC3c-MIB?

This is a vendor-specific MIB from Sonoma Systems, an ATM/SONET access equipment vendor, for managing ATM interfaces running over OC-3c SONET links. It would expose configuration for the OC-3c physical/SONET layer along with ATM cell-layer statistics and alarm/status indicators for the interface. Its monitoring role centers on interface and physical-layer fault status — SONET alarms (e.g., loss of signal/frame, line/section errors) and ATM cell throughput — which reflect the hardware health of the optical/electrical transport rather than general system resources like CPU or memory. It would depend on standard SONET/ATM MIBs (e.g., ATM-MIB, RFC 2558 SONET-MIB) for shared textual conventions typical of ATM interface MIBs of that era. It was deployed on Sonoma Systems ATM access devices providing OC-3c uplinks in carrier or enterprise WAN environments. Network engineers evaluating or troubleshooting this functionality can download the SONOMASYSTEMS-SONOMA-ATM-OC3c-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONOMASYSTEMS-SONOMA-ATM-OC3c-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonoma Systems ATM OC-3c access device

Monitoring Examples

No sample objects were provided for this module, so a concrete polling scenario cannot be built from real object names; based on its description an admin would poll OC-3c/SONET alarm and cell-throughput objects on the interface to detect line faults.

What Can Be Monitored

OC-3c/SONET alarm status
ATM cell throughput
interface configuration/line state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From SONOMASYSTEMS-SONOMA-MIB

sonomaATM

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
sonomaOC3cATMAdapterGroup	1.3.6.1.4.1.2926.25.7.4
atmOC3cConfGroup	1.3.6.1.4.1.2926.25.7.4.1
atmOC3cConfPhyTable	1.3.6.1.4.1.2926.25.7.4.1.1		not-accessible	A table of physical layer configuration for the OC3c interface
atmOC3cConfPhyEntry	1.3.6.1.4.1.2926.25.7.4.1.1.1		not-accessible	A entry in the table, containing information about the physical layer of a OC3c interface
INT atmOC3cConfPhysIndex	1.3.6.1.4.1.2926.25.7.4.1.1.1.1	INTEGER	read-only	The physical interface index.
INT atmOC3cConfFraming	1.3.6.1.4.1.2926.25.7.4.1.1.1.2	INTEGER	read-write	Indicates the type of framing supported.
INT atmOC3cConfLoopbackMode	1.3.6.1.4.1.2926.25.7.4.1.1.1.3	INTEGER	read-write	Configure the loopback mode to use.
INT atmOC3cConfFillerCells	1.3.6.1.4.1.2926.25.7.4.1.1.1.4	INTEGER	read-write	This parameter indicates the type of filler cells to send when there are no data cells.
INT atmOC3cConfOpticalDataLink	1.3.6.1.4.1.2926.25.7.4.1.1.1.5	INTEGER	read-only	This parameter indicates the type of Optical Data Link.
INT atmOC3cConfReceiveClockLooping	1.3.6.1.4.1.2926.25.7.4.1.1.1.6	INTEGER	read-write	When enabled, the receive clock is used as the clock for the transmit side. Otherwise an internal oscillator is used for the transmit clock.
atmOC3cStatsGroup	1.3.6.1.4.1.2926.25.7.4.2
atmOC3cStatsTable	1.3.6.1.4.1.2926.25.7.4.2.1		not-accessible	A table of physical layer statistics information for the OC3c interface
atmOC3cStatsEntry	1.3.6.1.4.1.2926.25.7.4.2.1.1		not-accessible	A entry in the table, containing information about the physical layer of a OC3c interface
INT atmOC3cStatsPhysIndex	1.3.6.1.4.1.2926.25.7.4.2.1.1.1	INTEGER	read-only	The physical interface index.
CTR atmOC3cStatsNoSignals	1.3.6.1.4.1.2926.25.7.4.2.1.1.2	Counter	read-only	No signal error counter.
CTR atmOC3cStatsNoOC3cFrames	1.3.6.1.4.1.2926.25.7.4.2.1.1.3	Counter	read-only	No OC3c frames error counter.
CTR atmOC3cStatsFrameErrors	1.3.6.1.4.1.2926.25.7.4.2.1.1.4	Counter	read-only	A count of the number of Frames in error.
CTR atmOC3cStatsB1ParityErrors	1.3.6.1.4.1.2926.25.7.4.2.1.1.5	Counter	read-only	B1 parity error counter.
CTR atmOC3cStatsB2ParityErrors	1.3.6.1.4.1.2926.25.7.4.2.1.1.6	Counter	read-only	B2 parity error counter.
CTR atmOC3cStatsB3ParityErrors	1.3.6.1.4.1.2926.25.7.4.2.1.1.7	Counter	read-only	B3 parity error counter.
CTR atmOC3cStatsB1BlockErrors	1.3.6.1.4.1.2926.25.7.4.2.1.1.8	Counter	read-only	B1 block error counter.
CTR atmOC3cStatsB2BlockErrors	1.3.6.1.4.1.2926.25.7.4.2.1.1.9	Counter	read-only	B2 block error counter.
CTR atmOC3cStatsB3BlockErrors	1.3.6.1.4.1.2926.25.7.4.2.1.1.10	Counter	read-only	B3 block error counter.
CTR atmOC3cStatsB1CodeViolations	1.3.6.1.4.1.2926.25.7.4.2.1.1.11	Counter	read-only	B1 code violation error counter.
CTR atmOC3cStatsB2CodeViolations	1.3.6.1.4.1.2926.25.7.4.2.1.1.12	Counter	read-only	B2 code violation error counter.
CTR atmOC3cStatsB3CodeViolations	1.3.6.1.4.1.2926.25.7.4.2.1.1.13	Counter	read-only	B3 code violation error counter.
CTR atmOC3cStatsLineFERFDetects	1.3.6.1.4.1.2926.25.7.4.2.1.1.14	Counter	read-only	Line FERF detects counter.
CTR atmOC3cStatsPathFERFDetects	1.3.6.1.4.1.2926.25.7.4.2.1.1.15	Counter	read-only	Path FERF detects counter.
CTR atmOC3cStatsLineAISDetects	1.3.6.1.4.1.2926.25.7.4.2.1.1.16	Counter	read-only	Line AIS (Alarm Indication Signal) error counter.
CTR atmOC3cStatsPathAISDetects	1.3.6.1.4.1.2926.25.7.4.2.1.1.17	Counter	read-only	Path AIS (Alarm Indication Signal) error counter.
CTR atmOC3cStatsRDIDefects	1.3.6.1.4.1.2926.25.7.4.2.1.1.18	Counter	read-only	RDI (Remote Defects Indication) error counter.
INT atmOC3cStatsSignalLoss	1.3.6.1.4.1.2926.25.7.4.2.1.1.19	INTEGER	read-only	Signal Loss state.
INT atmOC3cStatsOpticalCarrierLoss	1.3.6.1.4.1.2926.25.7.4.2.1.1.20	INTEGER	read-only	Optical carrier loss state.
INT atmOC3cStatsFrameLoss	1.3.6.1.4.1.2926.25.7.4.2.1.1.21	INTEGER	read-only	The frame loss state.
INT atmOC3cStatsSyncLoss	1.3.6.1.4.1.2926.25.7.4.2.1.1.22	INTEGER	read-only	The Sync loss state.
INT atmOC3cStatsOutOfCell	1.3.6.1.4.1.2926.25.7.4.2.1.1.23	INTEGER	read-only	The out-of-cell state.
INT atmOC3cStatsPointerLoss	1.3.6.1.4.1.2926.25.7.4.2.1.1.24	INTEGER	read-only	The pointer loss state.
INT atmOC3cStatsFIFOOverflow	1.3.6.1.4.1.2926.25.7.4.2.1.1.25	INTEGER	read-only	ATM FIFO overflow state.
INT atmOC3cStatsLineFERFDetect	1.3.6.1.4.1.2926.25.7.4.2.1.1.26	INTEGER	read-only	Line FERF state.
INT atmOC3cStatsPathFERFDetect	1.3.6.1.4.1.2926.25.7.4.2.1.1.27	INTEGER	read-only	Path FERF state.
INT atmOC3cStatsLineAISState	1.3.6.1.4.1.2926.25.7.4.2.1.1.28	INTEGER	read-only	The Line AIS (Alarm Indication Signal) state.
INT atmOC3cStatsPathAISState	1.3.6.1.4.1.2926.25.7.4.2.1.1.29	INTEGER	read-only	The Path AIS (Alarm Indication Signal) state.
INT atmOC3cStatsRDIState	1.3.6.1.4.1.2926.25.7.4.2.1.1.30	INTEGER	read-only	RDI (Remote Defect Indication) state.
INT atmOC3cStatsClearCounters	1.3.6.1.4.1.2926.25.7.4.2.1.1.31	INTEGER	read-write	Clear all counters in this group ONLY.

RFC description

Manages SonomaSystems ATM OC-3c SONET interface configuration, cell throughput, and alarm status.

Start monitoring Sonoma Systems ATM OC-3c access device (SONET/ATM physical-layer status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONOMASYSTEMS-SONOMA-ATM-OC3c-MIB

What Is SONOMASYSTEMS-SONOMA-ATM-OC3c-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description