SONOMASYSTEMS-SONOMA-ATM-DS3-MIB

All MIBs › SONOMASYSTEMS-SONOMA-ATM-DS3-MIB

Category: ATM Interface Management, SonomaSystems ATM WAN Management

Description: Manages SonomaSystems ATM DS3 interface configuration, cell statistics, and physical layer status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONOMASYSTEMS-SONOMA-ATM-DS3-MIB?

SONOMASYSTEMS-SONOMA-ATM-DS3-MIB is a vendor-specific MIB from Sonoma Systems covering ATM interfaces running over DS3 physical circuits. It is expected to expose DS3 physical-layer configuration and status alongside ATM cell-layer statistics such as cell counts and errors. As a physical/link interface MIB it is used chiefly for hardware status monitoring of the DS3 line and ATM cell processing, since DS3 carrier and framing state directly indicate whether the WAN circuit is up. No sample objects were available for this module, so specifics are inferred from its name and category rather than confirmed field names. It relies on standard DS3/ATM interface conventions (akin to the IETF DS3-MIB and ATM-MIB) and would be deployed on Sonoma ATM/DS3 WAN edge equipment in telecom or enterprise backbone links. Engineers can download the SONOMASYSTEMS-SONOMA-ATM-DS3-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONOMASYSTEMS-SONOMA-ATM-DS3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonoma Systems ATM/DS3 WAN device

Monitoring Examples

No runtime sample objects were provided for this MIB, so a concrete object-level monitoring scenario cannot be responsibly constructed; in general such a module would be polled for DS3 line alarm/status and ATM cell error counts to detect a failed or degraded circuit.

What Can Be Monitored

DS3 physical line status
ATM cell statistics
framing/alarm state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From SONOMASYSTEMS-SONOMA-MIB

sonomaATM

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
sonomaDS3ATMAdapterGroup	1.3.6.1.4.1.2926.25.7.2
atmDs3ConfGroup	1.3.6.1.4.1.2926.25.7.2.1
atmDs3ConfPhyTable	1.3.6.1.4.1.2926.25.7.2.1.1		not-accessible	A table of physical layer configuration for the DS3 interface
atmDs3ConfPhyEntry	1.3.6.1.4.1.2926.25.7.2.1.1.1		not-accessible	A entry in the table, containing information about the physical layer of a DS3 interface
INT atmDs3ConfPhysIndex	1.3.6.1.4.1.2926.25.7.2.1.1.1.1	INTEGER	read-only	The physical interface index.
INT atmDs3ConfFraming	1.3.6.1.4.1.2926.25.7.2.1.1.1.2	INTEGER	read-only	DS3 or E3 framing selection.
INT atmDs3ConfInsGFCBits	1.3.6.1.4.1.2926.25.7.2.1.1.1.3	INTEGER	read-write	Enable/disable the insertion of GFC bits.
INT atmDs3ConfSerBipolarIO	1.3.6.1.4.1.2926.25.7.2.1.1.1.4	INTEGER	read-write	Enable/disable bipolar serial I/O.
INT atmDs3ConfScramblePld	1.3.6.1.4.1.2926.25.7.2.1.1.1.5	INTEGER	read-write	Enable/disable payload scrambling.
INT atmDs3ConfOverheadPLCP	1.3.6.1.4.1.2926.25.7.2.1.1.1.6	INTEGER	read-write	Enable/disable PLCP processing.
INT atmDs3ConfGenerateFEBE	1.3.6.1.4.1.2926.25.7.2.1.1.1.7	INTEGER	read-write	Enable/disable FEBE generation when F, M, or CP bit errors received.
INT atmDs3ConfGenerateFEAC	1.3.6.1.4.1.2926.25.7.2.1.1.1.8	INTEGER	read-write	Enable/disable FEAC generation and detection.
INT atmDs3ConfLoopback	1.3.6.1.4.1.2926.25.7.2.1.1.1.9	INTEGER	read-write	Enable/disable internal loopback.
INT atmDs3ConfCableLength	1.3.6.1.4.1.2926.25.7.2.1.1.1.10	INTEGER	read-write	Configure for the length of the cable.
INT atmDs3ConfInternalEqualizer	1.3.6.1.4.1.2926.25.7.2.1.1.1.11	INTEGER	read-write	Configure to use or bypass the internal equalizer.
INT atmDs3ConfFillerCells	1.3.6.1.4.1.2926.25.7.2.1.1.1.12	INTEGER	read-write	This parameter indicates the type of filler cells to send when there are no data cells.
INT atmDs3ConfGenerateClock	1.3.6.1.4.1.2926.25.7.2.1.1.1.13	INTEGER	read-write	Enable/disable clock generation.
atmDs3StatsGroup	1.3.6.1.4.1.2926.25.7.2.2
atmDs3PhyStatsTable	1.3.6.1.4.1.2926.25.7.2.2.1		not-accessible	A table of physical layer statistics information for the DS3 interface
atmDs3PhyStatsEntry	1.3.6.1.4.1.2926.25.7.2.2.1.1		not-accessible	A entry in the table, containing information about the physical layer of a DS3 interface
INT atmDs3PhyStatsPhysIndex	1.3.6.1.4.1.2926.25.7.2.2.1.1.1	INTEGER	read-only	The physical interface index.
CTR atmDs3StatsAlarms	1.3.6.1.4.1.2926.25.7.2.2.1.1.2	Counter	read-only	Test the PLCP alarm counter
CTR atmDs3StatsNoSignals	1.3.6.1.4.1.2926.25.7.2.2.1.1.3	Counter	read-only	No signal error counter.
CTR atmDs3StatsNoDs3Frames	1.3.6.1.4.1.2926.25.7.2.2.1.1.4	Counter	read-only	No DS-3 frame error counter.
CTR atmDs3StatsAisDetects	1.3.6.1.4.1.2926.25.7.2.2.1.1.5	Counter	read-only	AIS detect counter.
CTR atmDs3StatsFrameErrs	1.3.6.1.4.1.2926.25.7.2.2.1.1.6	Counter	read-only	Frame error counter.
CTR atmDs3StatsParityErrs	1.3.6.1.4.1.2926.25.7.2.2.1.1.7	Counter	read-only	Parity error counter.
CTR atmDs3StatsCpErrs	1.3.6.1.4.1.2926.25.7.2.2.1.1.8	Counter	read-only	CP error counter.
CTR atmDs3StatsFeBlockErrs	1.3.6.1.4.1.2926.25.7.2.2.1.1.9	Counter	read-only	Far End Block error counter.
CTR atmDs3StatsBpvErrs	1.3.6.1.4.1.2926.25.7.2.2.1.1.10	Counter	read-only	Bipolar Violation error counter.
CTR atmDs3StatsRemoteAlarms	1.3.6.1.4.1.2926.25.7.2.2.1.1.11	Counter	read-only	Bipolar Violation error counter.
INT atmDs3StatsSignalLoss	1.3.6.1.4.1.2926.25.7.2.2.1.1.12	INTEGER	read-only	Signal loss indication.
INT atmDs3StatsOutOfCell	1.3.6.1.4.1.2926.25.7.2.2.1.1.13	INTEGER	read-only	ATM out-of-cell delineation.
INT atmDs3StatsFifoOverflow	1.3.6.1.4.1.2926.25.7.2.2.1.1.14	INTEGER	read-only	ATM FIFO overflow.
INT atmDs3StatsRemoteAlarmInd	1.3.6.1.4.1.2926.25.7.2.2.1.1.15	INTEGER	read-only	Remote alarm indication.
INT atmDs3StatsFrameLoss	1.3.6.1.4.1.2926.25.7.2.2.1.1.16	INTEGER	read-only	Frame loss indication.
INT atmDs3StatsSyncLoss	1.3.6.1.4.1.2926.25.7.2.2.1.1.17	INTEGER	read-only	Synchronization loss counter.
INT atmDs3StatsPlcpAlarmState	1.3.6.1.4.1.2926.25.7.2.2.1.1.18	INTEGER	read-only	Test the PLCP alarm state.
INT atmDs3StatsAisState	1.3.6.1.4.1.2926.25.7.2.2.1.1.19	INTEGER	read-only	AIS detect LED state.
INT atmDs3StatsClearCounters	1.3.6.1.4.1.2926.25.7.2.2.1.1.20	INTEGER	read-write	Clear all counters in this group ONLY.

RFC description

Manages DS3 ATM adapter configuration and statistics for Sonoma Systems ATM interfaces.

Start monitoring Sonoma Systems ATM/DS3 WAN device (DS3 physical-layer/ATM cell status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONOMASYSTEMS-SONOMA-ATM-DS3-MIB

What Is SONOMASYSTEMS-SONOMA-ATM-DS3-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description