-- |**********************************************************************| -- | Copyright 1998 - Sonoma Systems, Inc. Marina del Rey, CA 90292 | -- | Unpublished software - All rights reserved. | -- | | -- | The information in this software is subject to change without notice | -- | and should not be construed as a commitment by Sonoma Systems, Inc. | -- | | -- | Sonoma Systems, Inc. assumes no responsibility for the use or | -- | reliability of its software on equipment which is not supplied by | -- | Sonoma Systems, Inc. | -- | | -- | This software is furnished under a license and may be copied only | -- | under the terms of that license and with the inclusion of this | -- | notice. This software, or any other copies thereof, may not be | -- | provided or otherwise made available to any other person except to | -- | one who agrees to these license terms. Title to and ownership of the | -- | software shall at all times remain with Sonoma Systems, Inc. | -- |**********************************************************************| -- -- Sonoma Systems Inc., -- 4640 Admiralty Way, Suite #600, -- Marina Del Rey, -- California 90292-6695. -- -- Web : www.sonoma-systems.com -- Phone: 310.827.8000 -- -- NAME : e3mib.def -- -- DESCRIPTION : This is the MIB for the Sonoma ATM/E3 interface. -- -- ARCHIVE : $Archive: M:\pvcs\pvcsproj\sonoma3\src\mib\e3mib.dev $ -- REVISION: $Revision: 1.8 $ -- AUTHOR : $Author: TMANCOUR $ -- DATE : $Date: Feb 08 1999 14:08:26 $ SONOMASYSTEMS-SONOMA-ATM-E3-MIB DEFINITIONS ::= BEGIN IMPORTS Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 sonomaATM FROM SONOMASYSTEMS-SONOMA-MIB; -- This MIB module uses the extended OBJECT-TYPE macro as -- defined in [14]; -- -- Hierarchy for these groups -- enterprises OBJECT IDENTIFIER ::= { private 4 } -- sonomaSystems OBJECT IDENTIFIER ::= { enterprises 2926 } -- sonomaSeries OBJECT IDENTIFIER ::= { sonomaSystems 25 } -- sonomaATM OBJECT IDENTIFIER ::= { sonomaSeries 7 } sonomaE3ATMAdapterGroup OBJECT IDENTIFIER ::= { sonomaATM 3 } -- Sonoma E3 ATM Adapter Specific Group MIB groups atmE3ConfGroup OBJECT IDENTIFIER ::= { sonomaE3ATMAdapterGroup 1 } atmE3StatsGroup OBJECT IDENTIFIER ::= { sonomaE3ATMAdapterGroup 2 } -- Sonoma E3 ATM Adapter Specific Group MIB groups -- This group contains all informat specificly for -- Sonoma Systems E3 adapter. It includes the configuration and -- some statistics information -- atmE3ConfGroup atmE3ConfPhyTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmE3ConfPhyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of physical layer configuration for the E3 interface" ::= { atmE3ConfGroup 1 } atmE3ConfPhyEntry OBJECT-TYPE SYNTAX AtmE3ConfPhyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A entry in the table, containing information about the physical layer of a E3 interface" INDEX { atmE3ConfPhysIndex } ::= { atmE3ConfPhyTable 1 } AtmE3ConfPhyEntry ::= SEQUENCE { atmE3ConfPhysIndex INTEGER, atmE3ConfFraming INTEGER, atmE3ConfInsGFCBits INTEGER, atmE3ConfSerBipolarIO INTEGER, atmE3ConfPayloadScrambling INTEGER, atmE3ConfOverheadProcessing INTEGER, atmE3ConfHDB3Encoding INTEGER, atmE3ConfLoopback INTEGER, atmE3ConfCableLength INTEGER, atmE3ConfInternalEqualizer INTEGER, atmE3ConfFillerCells INTEGER, atmE3ConfGenerateClock INTEGER } atmE3ConfPhysIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical interface index." ::= { atmE3ConfPhyEntry 1 } atmE3ConfFraming OBJECT-TYPE SYNTAX INTEGER { framingE3(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the type of framing supported." DEFVAL { framingE3 } ::= { atmE3ConfPhyEntry 2 } atmE3ConfInsGFCBits OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable the insertion of GFC bits." DEFVAL { disabled } ::= { atmE3ConfPhyEntry 3 } atmE3ConfSerBipolarIO OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable bipolar serial I/O." DEFVAL { enabled } ::= { atmE3ConfPhyEntry 4 } atmE3ConfPayloadScrambling OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable payload scrambling." DEFVAL { enabled } ::= { atmE3ConfPhyEntry 5 } atmE3ConfOverheadProcessing OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable Overhead processing." DEFVAL { enabled } ::= { atmE3ConfPhyEntry 6 } atmE3ConfHDB3Encoding OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable HDB3 (High Density Bipolar 3) Encoding." DEFVAL { enabled } ::= { atmE3ConfPhyEntry 7 } atmE3ConfLoopback OBJECT-TYPE SYNTAX INTEGER { disabled(1), internal(2), external(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to modify the state of internal loopback...." DEFVAL { disabled } ::= { atmE3ConfPhyEntry 8 } atmE3ConfCableLength OBJECT-TYPE SYNTAX INTEGER { notGreaterThan225Feet(1), greaterThan225Feet(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configure for the length of the cable." DEFVAL { notGreaterThan225Feet } ::= { atmE3ConfPhyEntry 9 } atmE3ConfInternalEqualizer OBJECT-TYPE SYNTAX INTEGER { use(1), bypass(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Configure to use or bypass the internal equalizer." DEFVAL { use } ::= { atmE3ConfPhyEntry 10 } atmE3ConfFillerCells OBJECT-TYPE SYNTAX INTEGER { unassigned(1), idle(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This parameter indicates the type of filler cells to send when there are no data cells." DEFVAL { unassigned } ::= { atmE3ConfPhyEntry 11 } atmE3ConfGenerateClock OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable/disable clock generation." DEFVAL { disabled } ::= { atmE3ConfPhyEntry 12 } -- atmE3StatsGroup atmE3StatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmE3StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of physical layer statistics information for the E3 interface" ::= { atmE3StatsGroup 1 } atmE3StatsEntry OBJECT-TYPE SYNTAX AtmE3StatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A entry in the table, containing information about the physical layer of a E3 interface" INDEX { atmE3StatsPhysIndex } ::= { atmE3StatsTable 1 } AtmE3StatsEntry ::= SEQUENCE { atmE3StatsPhysIndex INTEGER, atmE3StatsNoSignals Counter, atmE3StatsNoE3Frames Counter, atmE3StatsFrameErrors Counter, atmE3StatsHECErrors Counter, atmE3StatsEMErrors Counter, atmE3StatsFeBlockErrors Counter, atmE3StatsBpvErrors Counter, atmE3StatsPayloadTypeMismatches Counter, atmE3StatsTimingMarkers Counter, atmE3StatsAISDetects Counter, atmE3StatsRDIDetects Counter, atmE3StatsSignalLoss INTEGER, atmE3StatsFrameLoss INTEGER, atmE3StatsSyncLoss INTEGER, atmE3StatsOutOfCell INTEGER, atmE3StatsFIFOOverflow INTEGER, atmE3StatsPayloadTypeMismatch INTEGER, atmE3StatsTimingMarker INTEGER, atmE3StatsAISDetect INTEGER, atmE3StatsRDIDetect INTEGER, atmE3StatsClearCounters INTEGER } atmE3StatsPhysIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical interface index." ::= { atmE3StatsEntry 1 } atmE3StatsNoSignals OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No signal error counter." ::= { atmE3StatsEntry 2 } atmE3StatsNoE3Frames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "No E3 frames error counter." ::= { atmE3StatsEntry 3 } atmE3StatsFrameErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of the number of Frames in error." ::= { atmE3StatsEntry 4 } atmE3StatsHECErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "HEC (Header Error Check) error counter." ::= { atmE3StatsEntry 5 } atmE3StatsEMErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "EM (error monitoring) error counter." ::= { atmE3StatsEntry 6 } atmE3StatsFeBlockErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Far End Block error counter." ::= { atmE3StatsEntry 7 } atmE3StatsBpvErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Bipolar Violation error counter." ::= { atmE3StatsEntry 8 } atmE3StatsPayloadTypeMismatches OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Payload Type Mismatches error counter." ::= { atmE3StatsEntry 9 } atmE3StatsTimingMarkers OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Timing Markers error counter." ::= { atmE3StatsEntry 10 } atmE3StatsAISDetects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "AIS (Alarm Indication Signal) detect counter." ::= { atmE3StatsEntry 11 } atmE3StatsRDIDetects OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "RDI (Remote Defect Indication) error counter." ::= { atmE3StatsEntry 12 } atmE3StatsSignalLoss OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Signal loss indication." ::= { atmE3StatsEntry 13 } atmE3StatsFrameLoss OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Frame loss indication." ::= { atmE3StatsEntry 14 } atmE3StatsSyncLoss OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Synchronization loss counter." ::= { atmE3StatsEntry 15 } atmE3StatsOutOfCell OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "ATM out-of-cell delineation." ::= { atmE3StatsEntry 16 } atmE3StatsFIFOOverflow OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "ATM FIFO overflow." ::= { atmE3StatsEntry 17 } atmE3StatsPayloadTypeMismatch OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The Payload Type Mismatch state." ::= { atmE3StatsEntry 18 } atmE3StatsTimingMarker OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The Timing Marker state." ::= { atmE3StatsEntry 19 } atmE3StatsAISDetect OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The AIS (Alarm Indication Signal) state." ::= { atmE3StatsEntry 20 } atmE3StatsRDIDetect OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-only STATUS mandatory DESCRIPTION "RDI (Remote Defect Indication) state." ::= { atmE3StatsEntry 21 } atmE3StatsClearCounters OBJECT-TYPE SYNTAX INTEGER { true (1), false (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear all counters in this group ONLY." DEFVAL { false } ::= { atmE3StatsEntry 22 } END