SONOMA-FR-MIB

All MIBs › SONOMA-FR-MIB

Category: IP Routing Protocols, SNA and Legacy WAN Protocols

Description: Covers frame relay interface configuration, PVC status, and traffic statistics on Sonoma devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SONOMA-FR-MIB?

SONOMA-FR-MIB is a vendor-specific MIB for Sonoma Systems networking equipment covering Frame Relay WAN interfaces. It exposes configuration and operational data for the Frame Relay DLCMI (Data Link Connection Management Interface), including polling intervals, error thresholds, and monitored event counts. It supports hardware/software status monitoring in the sense of interface and PVC operational state: dlcmiState and dlcmiStatus reveal whether a frame relay link is up, signaling correctly, or has failed, and error threshold counters flag degrading link quality. It builds on the standard Frame Relay DTE MIB conventions (RFC 2115-style DLCMI objects) adapted for Sonoma hardware. It is typically deployed on WAN routers or FRADs providing frame relay access in legacy telecom or enterprise WAN environments, where SONOMA-FR-MIB SNMP monitoring supports frame relay link-quality and PVC status tracking.

IPNetwork Monitor allows you to monitor SNMP objects defined in SONOMA-FR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sonoma Systems frame relay router/FRAD
WAN access equipment

Monitoring Examples

An operator would poll sonomaFrDlcmiTable/sonomaFrDlcmiEntry per interface, checking sonomaFrDlcmiState and sonomaFrDlcmiStatus to confirm the DLCMI protocol is actively exchanging status with the frame relay switch. sonomaFrDlcmiErrorThreshold and sonomaFrDlcmiMonitoredEvents would be watched to see if polling failures are accumulating toward the threshold, indicating a flaky PVC. sonomaFrDlcmiPollingInterval and sonomaFrDlcmiFullEnquiryInterval reveal how frequently the device checks link status, useful for diagnosing why a failure took a certain time to be detected.

What Can Be Monitored

DLCMI link state
PVC/DLCMI status
polling and enquiry intervals
error threshold counts
monitored event counts

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From SONOMASYSTEMS-SONOMA-MIB

sonomaSeries

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
sonomaFR	1.3.6.1.4.1.2926.25.9
sonomaFracTable	1.3.6.1.4.1.2926.25.9.1		not-accessible
sonomaFracEntry	1.3.6.1.4.1.2926.25.9.1.1		not-accessible
INT sonomaFracIndex	1.3.6.1.4.1.2926.25.9.1.1.1	INTEGER	read-only	Same index as DSX1LineIndex.
INT sonomaFracCount	1.3.6.1.4.1.2926.25.9.1.1.2	INTEGER	read-write	Number of Fractional T1 channels (1 - 24).
ccT5Table	1.3.6.1.4.1.2926.25.9.3		not-accessible	FRF.5 Connection Type Table.
ccT5Entry	1.3.6.1.4.1.2926.25.9.3.1		not-accessible	An entry in the cross-connection table of type FRF.5. The indexing of this table is identical to pmCrossConnectionTable. ccT5EndPointA will always refer to a FR logical port.
INT ccT5EndPointA	1.3.6.1.4.1.2926.25.9.3.1.1	INTEGER	read-only	The logical port number.
INT ccT5EndPointB	1.3.6.1.4.1.2926.25.9.3.1.2	INTEGER	read-only	The logical port number.
INT ccT5FRSSCSDLCI	1.3.6.1.4.1.2926.25.9.3.1.3	INTEGER	read-write	DLCI which will be used over this interface. Can and often is different from the DLCI on the frame relay physical port.
INT ccT5DEtoCLPMapping	1.3.6.1.4.1.2926.25.9.3.1.4	INTEGER	read-write	1 - Maps DE in Q.922 to DE in FR-SSCS frame and maps it to the CLP in ATM Header; 2 - Maps DE in Q.922 to DE in FR-SSCS frame but always sets CLP in ATM header to 0. 3 - Maps DE in Q.922 to DE in FR-SSCS frame but always sets CLP in ATM header to 1.
INT ccT5CLPtoDEMapping	1.3.6.1.4.1.2926.25.9.3.1.5	INTEGER	read-write	1 - Maps DE in FR-SSCS to DE in Q.922 frame and maps it to the CLP in ATM Header; 2 - Maps DE in FR-SSCS to DE in Q.922 frame but always sets CLP in ATM header to 0. 3 - Maps DE in FR-SSCS to DE in Q.922 frame but always sets CLP in ATM header to 1.
INT ccT5SSCSManagement	1.3.6.1.4.1.2926.25.9.3.1.6	INTEGER	read-write	Enable FR SSCS Management.
INT ccT5RowStatus	1.3.6.1.4.1.2926.25.9.3.1.7	INTEGER	read-write	This object is used to create new rows in this table, modify existing rows, and to delete existing rows.
sonomaFRDcePortTable	1.3.6.1.4.1.2926.25.9.4		not-accessible	Sonoma FR DCE Port Table.
sonomaFRDcePortEntry	1.3.6.1.4.1.2926.25.9.4.1		not-accessible	An entry in the Sonoma FR Port Table which represents a DCE. The main reason for this table is to support the Craft interface. For this, the number of subids in the OID of the index needs to be the same as for frLportEntry.
INT sonomaFRDcePort	1.3.6.1.4.1.2926.25.9.4.1.1	INTEGER	read-only	The FR port index.
INT sonomaFRDcePortType	1.3.6.1.4.1.2926.25.9.4.1.2	INTEGER	read-write	.
INT sonomaFRDcePortIncomingRateControl	1.3.6.1.4.1.2926.25.9.4.1.3	INTEGER	read-write	Enable the enforcement of incoming rate control.
INT sonomaFRDcePortOutgoingRateControl	1.3.6.1.4.1.2926.25.9.4.1.4	INTEGER	read-write	Enable the enforcement of outgoing rate control.
sonomaFRDlciTable	1.3.6.1.4.1.2926.25.9.5		not-accessible	Sonoma FR Dlci Table.
sonomaFRDlciEntry	1.3.6.1.4.1.2926.25.9.5.1		not-accessible	An entry in the Sonoma FR Dlci Table. The only reason for this table is to support the Craft interface. For this, the number of subids in the OID of the index needs to be the same as for frPVCEndptEntry.
INT sonomaFRDlciPort	1.3.6.1.4.1.2926.25.9.5.1.1	INTEGER	read-only	The FR port index.
INT sonomaFRDlci	1.3.6.1.4.1.2926.25.9.5.1.2	INTEGER	read-only	The FR port index.
sonomaFrDlcmiTable	1.3.6.1.4.1.2926.25.9.6		not-accessible	The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface.
sonomaFrDlcmiEntry	1.3.6.1.4.1.2926.25.9.6.1		not-accessible	The Parameters for a particular Data Link Connection Management Interface.
INT sonomaFrDlcmiIfIndex	1.3.6.1.4.1.2926.25.9.6.1.1	INTEGER	read-only	The ifIndex value of the corresponding ifEntry.
INT sonomaFrDlcmiState	1.3.6.1.4.1.2926.25.9.6.1.2	INTEGER	read-write	This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame Relay interface.
INT sonomaFrDlcmiPollingInterval	1.3.6.1.4.1.2926.25.9.6.1.5	INTEGER	read-write	This is the number of seconds between successive status enquiry messages.
INT sonomaFrDlcmiFullEnquiryInterval	1.3.6.1.4.1.2926.25.9.6.1.6	INTEGER	read-write	Number of status enquiry intervals that pass before issuance of a full status enquiry message.
INT sonomaFrDlcmiErrorThreshold	1.3.6.1.4.1.2926.25.9.6.1.7	INTEGER	read-write	This is the maximum number of unanswered Status Enquiries the equipment shall accept before declaring the interface down.
INT sonomaFrDlcmiMonitoredEvents	1.3.6.1.4.1.2926.25.9.6.1.8	INTEGER	read-write	This is the number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' number of events the station receives 'ErrorThreshold' number of errors, the interface is marked as down.
INT sonomaFrDlcmiStatus	1.3.6.1.4.1.2926.25.9.6.1.11	INTEGER	read-only	This indicates the status of the Frame Relay interface as determined by the performance of the dlcmi. If no dlcmi is running, the Frame Relay interface will stay in the running state indefinitely.
sonomaFRDtePortTable	1.3.6.1.4.1.2926.25.9.7		not-accessible	Sonoma FR DTE Port Table.
sonomaFRDtePortEntry	1.3.6.1.4.1.2926.25.9.7.1		not-accessible	An entry in the Sonoma FR Port Table which represents a DTE. The main reason for this table is to support the Craft interface. For this, the number of subids in the OID of the index needs to be the same as for sonomaFrDlcmiEntry.
INT sonomaFRDtePort	1.3.6.1.4.1.2926.25.9.7.1.1	INTEGER	read-only	The FR port index.
INT sonomaFRDtePortType	1.3.6.1.4.1.2926.25.9.7.1.2	INTEGER	read-write	.
ccT8Table	1.3.6.1.4.1.2926.25.9.8		not-accessible	FRF.8 Connection Type Table.
ccT8Entry	1.3.6.1.4.1.2926.25.9.8.1		not-accessible	An entry in the cross-connection table of type FRF.8. The indexing of this table is identical to pmCrossConnectionTable. ccT8EndPointA will always refer to a FR logical port.
INT ccT8EndPointA	1.3.6.1.4.1.2926.25.9.8.1.1	INTEGER	read-only	The logical port or bundle number.
INT ccT8EndPointB	1.3.6.1.4.1.2926.25.9.8.1.2	INTEGER	read-only	The logical port or bundle number.
INT ccT8DECLPMapping	1.3.6.1.4.1.2926.25.9.8.1.3	INTEGER	read-write
INT ccT8FECNEFCIMapping	1.3.6.1.4.1.2926.25.9.8.1.4	INTEGER	read-write	FECN/EFCI Mapping.
INT ccT8ULPEncapsulation	1.3.6.1.4.1.2926.25.9.8.1.5	INTEGER	read-write	ULP Encapsulation.
INT ccT8RowStatus	1.3.6.1.4.1.2926.25.9.8.1.6	INTEGER	read-write	This object is used to create new rows in this table, modify existing rows, and to delete existing rows.
sonomaFRPortStatsTable	1.3.6.1.4.1.2926.25.9.9		not-accessible	Sonoma FR Port Statistics Table.
sonomaFRPortStatsEntry	1.3.6.1.4.1.2926.25.9.9.1		not-accessible	FR Port Statistics for both DCE and DTE ports.
INT sonomaFRPortStatsPort	1.3.6.1.4.1.2926.25.9.9.1.1	INTEGER	read-only	The FR port index.
CTR sonomaFRPortStatsRecvLIVReqs	1.3.6.1.4.1.2926.25.9.9.1.2	Counter	read-only
CTR sonomaFRPortStatsSentLIVReqs	1.3.6.1.4.1.2926.25.9.9.1.3	Counter	read-only
CTR sonomaFRPortStatsRecvLIVRsps	1.3.6.1.4.1.2926.25.9.9.1.4	Counter	read-only
CTR sonomaFRPortStatsSentLIVRsps	1.3.6.1.4.1.2926.25.9.9.1.5	Counter	read-only
CTR sonomaFRPortStatsRecvFullReqs	1.3.6.1.4.1.2926.25.9.9.1.6	Counter	read-only
CTR sonomaFRPortStatsSentFullReqs	1.3.6.1.4.1.2926.25.9.9.1.7	Counter	read-only
CTR sonomaFRPortStatsRecvFullRsps	1.3.6.1.4.1.2926.25.9.9.1.8	Counter	read-only
CTR sonomaFRPortStatsSentFullRsps	1.3.6.1.4.1.2926.25.9.9.1.9	Counter	read-only
CTR sonomaFRPortStatsRecvAsyncStatus	1.3.6.1.4.1.2926.25.9.9.1.10	Counter	read-only
CTR sonomaFRPortStatsSentAsyncStatus	1.3.6.1.4.1.2926.25.9.9.1.11	Counter	read-only
CTR sonomaFRPortStatsInvalidMessages	1.3.6.1.4.1.2926.25.9.9.1.12	Counter	read-only
CTR sonomaFRPortStatsInvalidSeqNumbers	1.3.6.1.4.1.2926.25.9.9.1.13	Counter	read-only
CTR sonomaFRPortStatsTimeouts	1.3.6.1.4.1.2926.25.9.9.1.14	Counter	read-only
CTR sonomaFRPortStatsServAffectingConditions	1.3.6.1.4.1.2926.25.9.9.1.15	Counter	read-only
sonomaSerialPortStatsTable	1.3.6.1.4.1.2926.25.9.10		not-accessible	Sonoma Serial Port Statistics Table. The error statistics are copied from the rs232SyncPortTable.
sonomaSerialPortStatsEntry	1.3.6.1.4.1.2926.25.9.10.1		not-accessible	Serial Port Statistics.
INT sonomaSerialPortStatsPort	1.3.6.1.4.1.2926.25.9.10.1.1	INTEGER	read-only	The FR port index.
CTR sonomaSerialPortStatsRecvFrames	1.3.6.1.4.1.2926.25.9.10.1.2	Counter	read-only
CTR sonomaSerialPortStatsSentFrames	1.3.6.1.4.1.2926.25.9.10.1.3	Counter	read-only
CTR sonomaSerialPortStatsRecvBytes	1.3.6.1.4.1.2926.25.9.10.1.4	Counter	read-only
CTR sonomaSerialPortStatsSentBytes	1.3.6.1.4.1.2926.25.9.10.1.5	Counter	read-only
CTR sonomaSerialPortStatsRecvUtilization	1.3.6.1.4.1.2926.25.9.10.1.6	Counter	read-only
CTR sonomaSerialPortStatsSendUtilization	1.3.6.1.4.1.2926.25.9.10.1.7	Counter	read-only
CTR sonomaSerialPortStatsFrameCheckErrs	1.3.6.1.4.1.2926.25.9.10.1.8	Counter	read-only
CTR sonomaSerialPortStatsTransmitUnderrunErrs	1.3.6.1.4.1.2926.25.9.10.1.9	Counter	read-only
CTR sonomaSerialPortStatsReceiveOverrunErrs	1.3.6.1.4.1.2926.25.9.10.1.10	Counter	read-only
CTR sonomaSerialPortStatsInterruptedFrames	1.3.6.1.4.1.2926.25.9.10.1.11	Counter	read-only
CTR sonomaSerialPortStatsAbortedFrames	1.3.6.1.4.1.2926.25.9.10.1.12	Counter	read-only
sonomaFRDlciStatsTable	1.3.6.1.4.1.2926.25.9.11		not-accessible	Sonoma FR DLCI Statistics Table.
sonomaFRDlciStatsEntry	1.3.6.1.4.1.2926.25.9.11.1		not-accessible	FR DLCI Statistics.
INT sonomaFRDlciStatsPort	1.3.6.1.4.1.2926.25.9.11.1.1	INTEGER	read-only	The FR port index.
INT sonomaFRDlciStatsDlci	1.3.6.1.4.1.2926.25.9.11.1.2	INTEGER	read-only	The FR Dlci index.
CTR sonomaFRDlciStatsRecvFrames	1.3.6.1.4.1.2926.25.9.11.1.3	Counter	read-only
CTR sonomaFRDlciStatsSentFrames	1.3.6.1.4.1.2926.25.9.11.1.4	Counter	read-only
CTR sonomaFRDlciStatsRecvBytes	1.3.6.1.4.1.2926.25.9.11.1.5	Counter	read-only
CTR sonomaFRDlciStatsSentBytes	1.3.6.1.4.1.2926.25.9.11.1.6	Counter	read-only
CTR sonomaFRDlciStatsRecvDeFrames	1.3.6.1.4.1.2926.25.9.11.1.7	Counter	read-only
CTR sonomaFRDlciStatsSentDeFrames	1.3.6.1.4.1.2926.25.9.11.1.8	Counter	read-only
CTR sonomaFRDlciStatsRecvExcess	1.3.6.1.4.1.2926.25.9.11.1.9	Counter	read-only
CTR sonomaFRDlciStatsSentExcess	1.3.6.1.4.1.2926.25.9.11.1.10	Counter	read-only
CTR sonomaFRDlciStatsRecvDiscards	1.3.6.1.4.1.2926.25.9.11.1.11	Counter	read-only
CTR sonomaFRDlciStatsSentDiscards	1.3.6.1.4.1.2926.25.9.11.1.12	Counter	read-only
CTR sonomaFRDlciStatsRecvFecns	1.3.6.1.4.1.2926.25.9.11.1.13	Counter	read-only
CTR sonomaFRDlciStatsSentFecns	1.3.6.1.4.1.2926.25.9.11.1.14	Counter	read-only
CTR sonomaFRDlciStatsRecvBecns	1.3.6.1.4.1.2926.25.9.11.1.15	Counter	read-only
CTR sonomaFRDlciStatsSentBecns	1.3.6.1.4.1.2926.25.9.11.1.16	Counter	read-only

RFC description

Manages Sonoma frame relay interface configuration, PVC status, and traffic statistics.

Start monitoring Sonoma Systems frame relay router/FRAD, WAN access equipment (DLCMI/PVC status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SONOMA-FR-MIB

What Is SONOMA-FR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description