All MIBs › SLE-VRRP-MIB
Organization: DASAN Networks
Last Updated: 2016-03-16
Category: DASAN Networks SLE OLT Management
Description: Manages DASAN Networks SLE OLT VRRP redundancy groups, virtual router configuration, and failover status.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SLE-VRRP-MIB?
SLE-VRRP-MIB is a DASAN Networks proprietary MIB implementing VRRP (Virtual Router Redundancy Protocol) on SLE-series access equipment. Its base-info objects record VRRPv2-compatibility mode, virtual MAC, and delegate setting, with a parallel control-request/status/timer/result mechanism for applying changes, while a per-VRRP-session table (v4) records VRID, interface, status, accept mode, advertisement interval, circuit-failover interface and priority delta, preempt mode, priority, switch-back delay, and virtual IP value/ownership. As a configuration/status MIB it lets an administrator confirm a VRRP group's priority and preempt settings, and audit circuit-failover behavior tied to an uplink. It is deployed on DASAN Networks SLE-series access equipment. Engineers can download the SLE-VRRP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SLE-VRRP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- DASAN Networks SLE-series access equipment
Monitoring Examples
An administrator checks sleVrrp4SessionCircuitFailOverIfIndex and PriorityDelta to confirm a VRRP group will correctly reduce its priority and yield mastership if a tracked uplink fails on a DASAN SLE switch.
What Can Be Monitored
- VRRP session priority, preempt mode, and circuit-failover configuration
This MIB depends on
Related MIBs
Imported Objects
From DASAN-SMI
| sleMgmt | OBJECT-IDENTITY |
From SLE-TC-MIB
| SleControlRequestResultType | |
| SleControlStatusType |
From SNMPv2-CONF
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sleVRRP | 1.3.6.1.4.1.6296.101.57 | This MIB contains information about RIP version 2. | ||
| sleVrrpBase | 1.3.6.1.4.1.6296.101.57.1 | |||
| sleVrrpBaseInfo | 1.3.6.1.4.1.6296.101.57.1.1 | |||
| INT sleVrrpBaseInfoCompatibleV2 | 1.3.6.1.4.1.6296.101.57.1.1.1 | INTEGER | read-only | Backward-compatibility feature |
| INT sleVrrpBaseInfoVMac | 1.3.6.1.4.1.6296.101.57.1.1.2 | INTEGER | read-only | Virtual-MAC feature |
| INT sleVrrpBaseInfoDelegate | 1.3.6.1.4.1.6296.101.57.1.1.3 | INTEGER | read-only | Specify Delegation mode |
| sleVrrpBaseControl | 1.3.6.1.4.1.6296.101.57.1.2 | |||
| INT sleVrrpBaseControlRequest | 1.3.6.1.4.1.6296.101.57.1.2.1 | INTEGER | read-write | Description. |
| SLE sleVrrpBaseControlStatus | 1.3.6.1.4.1.6296.101.57.1.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleVrrpBaseControlTimer | 1.3.6.1.4.1.6296.101.57.1.2.3 | Gauge32 | read-write | Description. |
| TIK sleVrrpBaseControlTimeStamp | 1.3.6.1.4.1.6296.101.57.1.2.4 | TimeTicks | read-only | Description. |
| SLE sleVrrpBaseControlReqResult | 1.3.6.1.4.1.6296.101.57.1.2.5 | SleControlRequestResultType | read-only | Description. |
| INT sleVrrpBaseControlCompatibleV2 | 1.3.6.1.4.1.6296.101.57.1.2.6 | INTEGER | read-write | Backward-compatibility feature |
| INT sleVrrpBaseControlVMac | 1.3.6.1.4.1.6296.101.57.1.2.7 | INTEGER | read-write | Virtual-MAC feature |
| INT sleVrrpBaseControlDelegate | 1.3.6.1.4.1.6296.101.57.1.2.8 | INTEGER | read-write | Specify Delegation mode |
| sleVrrpSess | 1.3.6.1.4.1.6296.101.57.2 | |||
| sleVrrp4Session | 1.3.6.1.4.1.6296.101.57.2.1 | |||
| sleVrrp4SessionTable | 1.3.6.1.4.1.6296.101.57.2.1.1 | not-accessible | Description. | |
| sleVrrp4SessionEntry | 1.3.6.1.4.1.6296.101.57.2.1.1.1 | not-accessible | Description. | |
| I32 sleVrrp4SessionVrId | 1.3.6.1.4.1.6296.101.57.2.1.1.1.1 | Integer32 | read-only | The vrrp index. |
| I32 sleVrrp4SessionIfIndex | 1.3.6.1.4.1.6296.101.57.2.1.1.1.2 | Integer32 | read-only | The interface index. |
| INT sleVrrp4SessionStatus | 1.3.6.1.4.1.6296.101.57.2.1.1.1.3 | INTEGER | read-only | VRRP session |
| INT sleVrrp4SessionAcceptMode | 1.3.6.1.4.1.6296.101.57.2.1.1.1.4 | INTEGER | read-only | The accept mode for the session 1:true is default |
| I32 sleVrrp4SessionAdvertisementInterval | 1.3.6.1.4.1.6296.101.57.2.1.1.1.5 | Integer32 | read-only | The advertisement interval |
| I32 sleVrrp4SessionCircuitFailOverIfIndex | 1.3.6.1.4.1.6296.101.57.2.1.1.1.6 | Integer32 | read-only | Circuit failover for this VRRP session |
| I32 sleVrrp4SessionCircuitFailOverPriorityDelta | 1.3.6.1.4.1.6296.101.57.2.1.1.1.7 | Integer32 | read-only | Circuit failover priority delta for this VRRP session |
| INT sleVrrp4SessionPreemptMode | 1.3.6.1.4.1.6296.101.57.2.1.1.1.8 | INTEGER | read-only | The preempt mode for the session |
| I32 sleVrrp4SessionPriority | 1.3.6.1.4.1.6296.101.57.2.1.1.1.9 | Integer32 | read-only | The router priority within virtual router Must be 255 if own virtual IP address) |
| I32 sleVrrp4SessionSwitchBackDelay | 1.3.6.1.4.1.6296.101.57.2.1.1.1.10 | Integer32 | read-only | The router switch-back-delay interval switch-back-delay must be between 1 to 500000 msecs |
| OCT sleVrrp4SessionVirtualIpVal | 1.3.6.1.4.1.6296.101.57.2.1.1.1.11 | OCTET STRING | read-only | The virtual IPv4 address |
| INT sleVrrp4SessionVirtualIpOwner | 1.3.6.1.4.1.6296.101.57.2.1.1.1.12 | INTEGER | read-only | The virtual IPv4 address owner |
| INT sleVrrp4SessionCompatibleV2 | 1.3.6.1.4.1.6296.101.57.2.1.1.1.13 | INTEGER | read-only | Backward-compatibility feature |
| sleVrrp4SessionControl | 1.3.6.1.4.1.6296.101.57.2.1.2 | |||
| INT sleVrrp4SessionControlRequest | 1.3.6.1.4.1.6296.101.57.2.1.2.1 | INTEGER | read-write | Description. |
| SLE sleVrrp4SessionControlStatus | 1.3.6.1.4.1.6296.101.57.2.1.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleVrrp4SessionControlTimer | 1.3.6.1.4.1.6296.101.57.2.1.2.3 | Gauge32 | read-write | Description. |
| TIK sleVrrp4SessionControlTimeStamp | 1.3.6.1.4.1.6296.101.57.2.1.2.4 | TimeTicks | read-only | Description. |
| SLE sleVrrp4SessionControlReqResult | 1.3.6.1.4.1.6296.101.57.2.1.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleVrrp4SessionControlVrId | 1.3.6.1.4.1.6296.101.57.2.1.2.6 | Integer32 | read-write | The vrrp index. |
| I32 sleVrrp4SessionControlIfIndex | 1.3.6.1.4.1.6296.101.57.2.1.2.7 | Integer32 | read-write | The interface index |
| INT sleVrrp4SessionControlSessionStatus | 1.3.6.1.4.1.6296.101.57.2.1.2.8 | INTEGER | read-write | VRRP session |
| INT sleVrrp4SessionControlAcceptMode | 1.3.6.1.4.1.6296.101.57.2.1.2.9 | INTEGER | read-write | Set accept mode for the session 1:true is default |
| I32 sleVrrp4SessionControlAdvertisementInterval | 1.3.6.1.4.1.6296.101.57.2.1.2.10 | Integer32 | read-write | Set advertisement interval |
| I32 sleVrrp4SessionControlCircuitFailOverIfIndex | 1.3.6.1.4.1.6296.101.57.2.1.2.11 | Integer32 | read-write | Circuit failover for this VRRP session |
| I32 sleVrrp4SessionControlCircuitFailOverPriorityDelta | 1.3.6.1.4.1.6296.101.57.2.1.2.12 | Integer32 | read-write | Circuit failover for this VRRP session |
| INT sleVrrp4SessionControlPreemptMode | 1.3.6.1.4.1.6296.101.57.2.1.2.13 | INTEGER | read-write | Set preempt mode for the session |
| I32 sleVrrp4SessionControlPriority | 1.3.6.1.4.1.6296.101.57.2.1.2.14 | Integer32 | read-write | Set router priority within virtual router Must be 255 if own virtual IP address) |
| I32 sleVrrp4SessionControlSwitchBackDelay | 1.3.6.1.4.1.6296.101.57.2.1.2.15 | Integer32 | read-write | Set router switch-back-delay interval switch-back-delay must be between 1 to 500000 msecs |
| OCT sleVrrp4SessionControlVirtualIpVal | 1.3.6.1.4.1.6296.101.57.2.1.2.16 | OCTET STRING | read-write | Set virtual IPv4/6 address |
| INT sleVrrp4SessionControlVirtualIpOwner | 1.3.6.1.4.1.6296.101.57.2.1.2.17 | INTEGER | read-write | Set virtual IPv4 address |
| INT sleVrrp4SessionControlCompatibleV2 | 1.3.6.1.4.1.6296.101.57.2.1.2.18 | INTEGER | read-write | Enable Backward-compatibility feature |
| sleVrrp4SessionNotification | 1.3.6.1.4.1.6296.101.57.2.1.3 | |||
| sleVrrp4SessInfoTable | 1.3.6.1.4.1.6296.101.57.2.1.4 | not-accessible | Description. | |
| sleVrrp4SessInfoEntry | 1.3.6.1.4.1.6296.101.57.2.1.4.1 | not-accessible | Description. | |
| I32 sleVrrp4SessInfoVrId | 1.3.6.1.4.1.6296.101.57.2.1.4.1.1 | Integer32 | read-write | The vrrp index. |
| I32 sleVrrp4SessInfoIfIndex | 1.3.6.1.4.1.6296.101.57.2.1.4.1.2 | Integer32 | read-only | The interface index. |
| OCT sleVrrp4SessInfoVrfName | 1.3.6.1.4.1.6296.101.57.2.1.4.1.3 | OCTET STRING | read-only | The VRF name |
| I32 sleVrrp4SessInfoVrfFibId | 1.3.6.1.4.1.6296.101.57.2.1.4.1.4 | Integer32 | read-only | The FIB index. |
| INT sleVrrp4SessInfoSessionAdminState | 1.3.6.1.4.1.6296.101.57.2.1.4.1.5 | INTEGER | read-only | The VRRP session admin status. |
| INT sleVrrp4SessInfoSessionState | 1.3.6.1.4.1.6296.101.57.2.1.4.1.6 | INTEGER | read-only | The session state. |
| INT sleVrrp4SessInfoSessionStateInitMsg | 1.3.6.1.4.1.6296.101.57.2.1.4.1.7 | INTEGER | read-only | The message code in init state of session |
| OCT sleVrrp4SessInfoVirtualIp | 1.3.6.1.4.1.6296.101.57.2.1.4.1.8 | OCTET STRING | read-only | The virtual IPv4 address |
| INT sleVrrp4SessInfoVirtualIpOwner | 1.3.6.1.4.1.6296.101.57.2.1.4.1.9 | INTEGER | read-only | The virtual IPv4 address owner |
| I32 sleVrrp4SessInfoConfiguredPriority | 1.3.6.1.4.1.6296.101.57.2.1.4.1.10 | Integer32 | read-only | The configured router priority within virtual router |
| I32 sleVrrp4SessInfoCurrentPriority | 1.3.6.1.4.1.6296.101.57.2.1.4.1.11 | Integer32 | read-only | The current router priority within virtual router |
| I32 sleVrrp4SessInfoSwitchBackDelay | 1.3.6.1.4.1.6296.101.57.2.1.4.1.12 | Integer32 | read-only | The router switch-back-delay interval |
| I32 sleVrrp4SessInfoAdvertisementInterval | 1.3.6.1.4.1.6296.101.57.2.1.4.1.13 | Integer32 | read-only | The advertisement interval |
| I32 sleVrrp4SessInfoMasterAdvertisementInterval | 1.3.6.1.4.1.6296.101.57.2.1.4.1.14 | Integer32 | read-only | The master advertisement interval for VRRP version 3 |
| I32 sleVrrp4SessInfoSkewTime | 1.3.6.1.4.1.6296.101.57.2.1.4.1.15 | Integer32 | read-only | The skew time for VRRP version3 |
| INT sleVrrp4SessInfoAcceptMode | 1.3.6.1.4.1.6296.101.57.2.1.4.1.16 | INTEGER | read-only | The accept mode for VRRP version3 |
| INT sleVrrp4SessInfoPreemptMode | 1.3.6.1.4.1.6296.101.57.2.1.4.1.17 | INTEGER | read-only | The preempt mode for the session |
| I32 sleVrrp4SessInfoMonitorCircuitIfIndex | 1.3.6.1.4.1.6296.101.57.2.1.4.1.18 | Integer32 | read-only | Circuit failover for this VRRP session |
| I32 sleVrrp4SessInfoMonitorCircuitPrioDelta | 1.3.6.1.4.1.6296.101.57.2.1.4.1.19 | Integer32 | read-only | Circuit failover priority delta for this VRRP session |
| INT sleVrrp4SessInfoMonitorCircuitState | 1.3.6.1.4.1.6296.101.57.2.1.4.1.20 | INTEGER | read-only | The monitor circuit state |
| INT sleVrrp4SessInfoMulticastMembershipOn | 1.3.6.1.4.1.6296.101.57.2.1.4.1.21 | INTEGER | read-only | The multicast membership on (joined/left) |
| INT sleVrrp4SessInfoCompatibleV2 | 1.3.6.1.4.1.6296.101.57.2.1.4.1.22 | INTEGER | read-only | Backward-compatibility feature for VRRP version 3 |
| sleVrrp4SessStatTable | 1.3.6.1.4.1.6296.101.57.2.1.5 | not-accessible | Description. | |
| sleVrrp4SessStatEntry | 1.3.6.1.4.1.6296.101.57.2.1.5.1 | not-accessible | Description. | |
| I32 sleVrrp4SessStatVrid | 1.3.6.1.4.1.6296.101.57.2.1.5.1.1 | Integer32 | read-write | The vrrp index. |
| I32 sleVrrp4SessStatIfIndex | 1.3.6.1.4.1.6296.101.57.2.1.5.1.2 | Integer32 | read-only | The interface index. |
| C32 sleVrrp4SessStatChecksumErrors | 1.3.6.1.4.1.6296.101.57.2.1.5.1.3 | Counter32 | read-only | Checksum Errors |
| C32 sleVrrp4SessStatVersionErrors | 1.3.6.1.4.1.6296.101.57.2.1.5.1.4 | Counter32 | read-only | Version Errors |
| C32 sleVrrp4SessStatVridErrors | 1.3.6.1.4.1.6296.101.57.2.1.5.1.5 | Counter32 | read-only | VRid Errors |
| C32 sleVrrp4SessStatMasterTransitions | 1.3.6.1.4.1.6296.101.57.2.1.5.1.6 | Counter32 | read-only | Master Transitions |
| C32 sleVrrp4SessStatAdvertisementsRcvd | 1.3.6.1.4.1.6296.101.57.2.1.5.1.7 | Counter32 | read-only | Advertisements Rcvd |
| C32 sleVrrp4SessStatPktsRcvdAdvertisementIntervalErrors | 1.3.6.1.4.1.6296.101.57.2.1.5.1.8 | Counter32 | read-only | Packets recieved with Advertisement Interval Errors |
| C32 sleVrrp4SessStatPktsRcvdIpTtlErros | 1.3.6.1.4.1.6296.101.57.2.1.5.1.9 | Counter32 | read-only | Packets recieved with IP TTL Errors |
| C32 sleVrrp4SessStatPktsRcvdZeroPriority | 1.3.6.1.4.1.6296.101.57.2.1.5.1.10 | Counter32 | read-only | Packets recieved with Zero Priority |
| C32 sleVrrp4SessStatPktsSentZeroPriority | 1.3.6.1.4.1.6296.101.57.2.1.5.1.11 | Counter32 | read-only | Packets sent with Zero Priority |
| C32 sleVrrp4SessStatPktsRcvdInvalidType | 1.3.6.1.4.1.6296.101.57.2.1.5.1.12 | Counter32 | read-only | Packets recieved with Invalid type. |
| C32 sleVrrp4SessStatPktsRcvdAddressListErrors | 1.3.6.1.4.1.6296.101.57.2.1.5.1.13 | Counter32 | read-only | Packets recieved with Address List Errors |
| C32 sleVrrp4SessStatPktsRcvdPacketLengthErrors | 1.3.6.1.4.1.6296.101.57.2.1.5.1.14 | Counter32 | read-only | Packets recieved with Packet Length Errors |
| C32 sleVrrp4SessStatPktsRcvdUnknownAuthenticationType | 1.3.6.1.4.1.6296.101.57.2.1.5.1.15 | Counter32 | read-only | Packets recieved with Unknown Authentication Type |
| C32 sleVrrp4SessStatPktsRcvdIpCountMismatch | 1.3.6.1.4.1.6296.101.57.2.1.5.1.16 | Counter32 | read-only | Packets recieved with IP Count Mismatch |
| OCT sleVrrp4SessStatDiscontinuityTime | 1.3.6.1.4.1.6296.101.57.2.1.5.1.17 | OCTET STRING | read-only | Discontuinity Time. (Discontuinity Time) days:hours:minutes:seconds:centiseconds |
| I32 sleVrrp4SessStatRefreshRate | 1.3.6.1.4.1.6296.101.57.2.1.5.1.18 | Integer32 | read-only | Refresh Rate |
| sleVrrp6Session | 1.3.6.1.4.1.6296.101.57.2.2 | |||
| sleVrrp6SessionTable | 1.3.6.1.4.1.6296.101.57.2.2.1 | not-accessible | Description. | |
| sleVrrp6SessionEntry | 1.3.6.1.4.1.6296.101.57.2.2.1.1 | not-accessible | Description. | |
| I32 sleVrrp6SessionVrId | 1.3.6.1.4.1.6296.101.57.2.2.1.1.1 | Integer32 | read-only | The vrrp index. |
| I32 sleVrrp6SessionIfIndex | 1.3.6.1.4.1.6296.101.57.2.2.1.1.2 | Integer32 | read-only | The interface index. |
| INT sleVrrp6SessionStatus | 1.3.6.1.4.1.6296.101.57.2.2.1.1.3 | INTEGER | read-only | VRRP session |
| INT sleVrrp6SessionAcceptMode | 1.3.6.1.4.1.6296.101.57.2.2.1.1.4 | INTEGER | read-only | Set accept mode for the session 1:true is default |
| I32 sleVrrp6SessionAdvertisementInterval | 1.3.6.1.4.1.6296.101.57.2.2.1.1.5 | Integer32 | read-only | Set advertisement interval |
| I32 sleVrrp6SessionCircuitFailOverIfIndex | 1.3.6.1.4.1.6296.101.57.2.2.1.1.6 | Integer32 | read-only | Circuit failover for this VRRP session |
| I32 sleVrrp6SessionCircuitFailOverPriorityDelta | 1.3.6.1.4.1.6296.101.57.2.2.1.1.7 | Integer32 | read-only | Circuit failover for this VRRP session |
| INT sleVrrp6SessionPreemptMode | 1.3.6.1.4.1.6296.101.57.2.2.1.1.8 | INTEGER | read-only | Set preempt mode for the session |
| I32 sleVrrp6SessionPriority | 1.3.6.1.4.1.6296.101.57.2.2.1.1.9 | Integer32 | read-only | Set router priority within virtual router Must be 255 if own virtual IP address) |
| I32 sleVrrp6SessionSwitchBackDelay | 1.3.6.1.4.1.6296.101.57.2.2.1.1.10 | Integer32 | read-only | Set router switch-back-delay interval switch-back-delay must be between 1 to 500000 msecs |
| OCT sleVrrp6SessionVirtualIpVal | 1.3.6.1.4.1.6296.101.57.2.2.1.1.11 | OCTET STRING | read-only | Set virtual IPv6 address |
| INT sleVrrp6SessionVirtualIpOwner | 1.3.6.1.4.1.6296.101.57.2.2.1.1.12 | INTEGER | read-only | Set virtual IPv4 address |
| sleVrrp6SessionControl | 1.3.6.1.4.1.6296.101.57.2.2.2 | |||
| INT sleVrrp6SessionControlRequest | 1.3.6.1.4.1.6296.101.57.2.2.2.1 | INTEGER | read-write | Description. |
| SLE sleVrrp6SessionControlStatus | 1.3.6.1.4.1.6296.101.57.2.2.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleVrrp6SessionControlTimer | 1.3.6.1.4.1.6296.101.57.2.2.2.3 | Gauge32 | read-write | Description. |
| TIK sleVrrp6SessionControlTimeStamp | 1.3.6.1.4.1.6296.101.57.2.2.2.4 | TimeTicks | read-only | Description. |
| SLE sleVrrp6SessionControlReqResult | 1.3.6.1.4.1.6296.101.57.2.2.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleVrrp6SessionControlVrId | 1.3.6.1.4.1.6296.101.57.2.2.2.6 | Integer32 | read-write | The vrrp index. |
| I32 sleVrrp6SessionControlIfIndex | 1.3.6.1.4.1.6296.101.57.2.2.2.7 | Integer32 | read-write | The interface index |
| INT sleVrrp6SessionControlSessionStatus | 1.3.6.1.4.1.6296.101.57.2.2.2.8 | INTEGER | read-write | VRRP session |
| INT sleVrrp6SessionControlAcceptMode | 1.3.6.1.4.1.6296.101.57.2.2.2.9 | INTEGER | read-write | Set accept mode for the session 1:true is default |
| I32 sleVrrp6SessionControlAdvertisementInterval | 1.3.6.1.4.1.6296.101.57.2.2.2.10 | Integer32 | read-write | Set advertisement interval |
| I32 sleVrrp6SessionControlCircuitFailOverIfIndex | 1.3.6.1.4.1.6296.101.57.2.2.2.11 | Integer32 | read-write | Circuit failover for this VRRP session |
| I32 sleVrrp6SessionControlCircuitFailOverPriorityDelta | 1.3.6.1.4.1.6296.101.57.2.2.2.12 | Integer32 | read-write | Circuit failover for this VRRP session |
| INT sleVrrp6SessionControlPreemptMode | 1.3.6.1.4.1.6296.101.57.2.2.2.13 | INTEGER | read-write | Set preempt mode for the session |
| I32 sleVrrp6SessionControlPriority | 1.3.6.1.4.1.6296.101.57.2.2.2.14 | Integer32 | read-write | Set router priority within virtual router Must be 255 if own virtual IP address) |
| I32 sleVrrp6SessionControlSwitchBackDelay | 1.3.6.1.4.1.6296.101.57.2.2.2.15 | Integer32 | read-write | Set router switch-back-delay interval switch-back-delay must be between 1 to 500000 msecs |
| OCT sleVrrp6SessionControlVirtualIpVal | 1.3.6.1.4.1.6296.101.57.2.2.2.16 | OCTET STRING | read-write | Set virtual IPv4/6 address |
| INT sleVrrp6SessionControlVirtualIpOwner | 1.3.6.1.4.1.6296.101.57.2.2.2.17 | INTEGER | read-write | Set virtual IPv4 address |
| sleVrrp6SessionNotification | 1.3.6.1.4.1.6296.101.57.2.2.3 | |||
| sleVrrp6SessInfoTable | 1.3.6.1.4.1.6296.101.57.2.2.4 | not-accessible | Description. | |
| sleVrrp6SessInfoEntry | 1.3.6.1.4.1.6296.101.57.2.2.4.1 | not-accessible | Description. | |
| I32 sleVrrp6SessInfoVrId | 1.3.6.1.4.1.6296.101.57.2.2.4.1.1 | Integer32 | read-write | The vrrp index. |
| I32 sleVrrp6SessInfoIfIndex | 1.3.6.1.4.1.6296.101.57.2.2.4.1.2 | Integer32 | read-only | The interface index. |
| OCT sleVrrp6SessInfoVrfName | 1.3.6.1.4.1.6296.101.57.2.2.4.1.3 | OCTET STRING | read-only | The VRF name |
| I32 sleVrrp6SessInfoVrfFibId | 1.3.6.1.4.1.6296.101.57.2.2.4.1.4 | Integer32 | read-only | The FIB index. |
| INT sleVrrp6SessInfoSessionAdminState | 1.3.6.1.4.1.6296.101.57.2.2.4.1.5 | INTEGER | read-only | The VRRP session admin status. |
| INT sleVrrp6SessInfoSessionState | 1.3.6.1.4.1.6296.101.57.2.2.4.1.6 | INTEGER | read-only | The session state. |
| INT sleVrrp6SessInfoSessionStateInitMsg | 1.3.6.1.4.1.6296.101.57.2.2.4.1.7 | INTEGER | read-only | The message code in init state of session |
| OCT sleVrrp6SessInfoVirtualIp | 1.3.6.1.4.1.6296.101.57.2.2.4.1.8 | OCTET STRING | read-only | The virtual IPv6 address |
| INT sleVrrp6SessInfoVirtualIpOwner | 1.3.6.1.4.1.6296.101.57.2.2.4.1.9 | INTEGER | read-only | The virtual IPv4 address owner |
| I32 sleVrrp6SessInfoConfiguredPriority | 1.3.6.1.4.1.6296.101.57.2.2.4.1.10 | Integer32 | read-only | The configured router priority within virtual router |
| I32 sleVrrp6SessInfoCurrentPriority | 1.3.6.1.4.1.6296.101.57.2.2.4.1.11 | Integer32 | read-only | The current router priority within virtual router |
| I32 sleVrrp6SessInfoSwitchBackDelay | 1.3.6.1.4.1.6296.101.57.2.2.4.1.12 | Integer32 | read-only | The router switch-back-delay interval |
| I32 sleVrrp6SessInfoAdvertisementInterval | 1.3.6.1.4.1.6296.101.57.2.2.4.1.13 | Integer32 | read-only | The advertisement interval |
| I32 sleVrrp6SessInfoMasterAdvertisementInterval | 1.3.6.1.4.1.6296.101.57.2.2.4.1.14 | Integer32 | read-only | The master advertisement interval for VRRP version 3 |
| I32 sleVrrp6SessInfoSkewTime | 1.3.6.1.4.1.6296.101.57.2.2.4.1.15 | Integer32 | read-only | The skew time for VRRP version3 |
| INT sleVrrp6SessInfoAcceptMode | 1.3.6.1.4.1.6296.101.57.2.2.4.1.16 | INTEGER | read-only | The accept mode for VRRP version3 |
| INT sleVrrp6SessInfoPreemptMode | 1.3.6.1.4.1.6296.101.57.2.2.4.1.17 | INTEGER | read-only | The preempt mode for the session |
| I32 sleVrrp6SessInfoMonitorCircuitIfIndex | 1.3.6.1.4.1.6296.101.57.2.2.4.1.18 | Integer32 | read-only | Circuit failover for this VRRP session |
| I32 sleVrrp6SessInfoMonitorCircuitPrioDelta | 1.3.6.1.4.1.6296.101.57.2.2.4.1.19 | Integer32 | read-only | Circuit failover priority delta for this VRRP session |
| INT sleVrrp6SessInfoMonitorCircuitState | 1.3.6.1.4.1.6296.101.57.2.2.4.1.20 | INTEGER | read-only | The monitor circuit state |
| INT sleVrrp6SessInfoMulticastMembershipOn | 1.3.6.1.4.1.6296.101.57.2.2.4.1.21 | INTEGER | read-only | The multicast membership on (joined/left) |
| INT sleVrrp6SessInfoCompatibleV2 | 1.3.6.1.4.1.6296.101.57.2.2.4.1.22 | INTEGER | read-only | Backward-compatibility feature for VRRP version 3 |
| sleVrrp6SessStatTable | 1.3.6.1.4.1.6296.101.57.2.2.5 | not-accessible | Description. | |
| sleVrrp6SessStatEntry | 1.3.6.1.4.1.6296.101.57.2.2.5.1 | not-accessible | Description. | |
| I32 sleVrrp6SessStatVrid | 1.3.6.1.4.1.6296.101.57.2.2.5.1.1 | Integer32 | read-write | The vrrp index. |
| I32 sleVrrp6SessStatIfIndex | 1.3.6.1.4.1.6296.101.57.2.2.5.1.2 | Integer32 | read-only | The interface index. |
| C32 sleVrrp6SessStatChecksumErrors | 1.3.6.1.4.1.6296.101.57.2.2.5.1.3 | Counter32 | read-only | Checksum Errors |
| C32 sleVrrp6SessStatVersionErrors | 1.3.6.1.4.1.6296.101.57.2.2.5.1.4 | Counter32 | read-only | Version Errors |
| C32 sleVrrp6SessStatVridErrors | 1.3.6.1.4.1.6296.101.57.2.2.5.1.5 | Counter32 | read-only | VRid Errors |
| C32 sleVrrp6SessStatMasterTransitions | 1.3.6.1.4.1.6296.101.57.2.2.5.1.6 | Counter32 | read-only | Master Transitions |
| C32 sleVrrp6SessStatAdvertisementsRcvd | 1.3.6.1.4.1.6296.101.57.2.2.5.1.7 | Counter32 | read-only | Advertisements Rcvd |
| C32 sleVrrp6SessStatPktsRcvdAdvertisementIntervalErrors | 1.3.6.1.4.1.6296.101.57.2.2.5.1.8 | Counter32 | read-only | Packets recieved with Advertisement Interval Errors |
| C32 sleVrrp6SessStatPktsRcvdIpTtlErros | 1.3.6.1.4.1.6296.101.57.2.2.5.1.9 | Counter32 | read-only | Packets recieved with IP TTL Errors |
| C32 sleVrrp6SessStatPktsRcvdZeroPriority | 1.3.6.1.4.1.6296.101.57.2.2.5.1.10 | Counter32 | read-only | Packets recieved with Zero Priority |
| C32 sleVrrp6SessStatPktsSentZeroPriority | 1.3.6.1.4.1.6296.101.57.2.2.5.1.11 | Counter32 | read-only | Packets sent with Zero Priority |
| C32 sleVrrp6SessStatPktsRcvdInvalidType | 1.3.6.1.4.1.6296.101.57.2.2.5.1.12 | Counter32 | read-only | Packets recieved with Invalid type. |
| C32 sleVrrp6SessStatPktsRcvdAddressListErrors | 1.3.6.1.4.1.6296.101.57.2.2.5.1.13 | Counter32 | read-only | Packets recieved with Address List Errors |
| C32 sleVrrp6SessStatPktsRcvdPacketLengthErrors | 1.3.6.1.4.1.6296.101.57.2.2.5.1.14 | Counter32 | read-only | Packets recieved with Packet Length Errors |
| C32 sleVrrp6SessStatPktsRcvdUnknownAuthenticationType | 1.3.6.1.4.1.6296.101.57.2.2.5.1.15 | Counter32 | read-only | Packets recieved with Unknown Authentication Type |
| C32 sleVrrp6SessStatPktsRcvdIpCountMismatch | 1.3.6.1.4.1.6296.101.57.2.2.5.1.16 | Counter32 | read-only | Packets recieved with IP Count Mismatch |
| OCT sleVrrp6SessStatDiscontinuityTime | 1.3.6.1.4.1.6296.101.57.2.2.5.1.17 | OCTET STRING | read-only | Discontuinity Time. (Discontuinity Time) days:hours:minutes:seconds:centiseconds |
| I32 sleVrrp6SessStatRefreshRate | 1.3.6.1.4.1.6296.101.57.2.2.5.1.18 | Integer32 | read-only | Refresh Rate |
| sleISISGroup | 1.3.6.1.4.1.6296.101.57.5 | Description. |
RFC description
VRRP router management including virtual IP configuration for DASAN networks.
Start monitoring DASAN Networks SLE-series access equipment (VRRP group priority/preempt/circuit-failover status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.