All MIBs › SLE-FAULTMGMT-MIB
Organization: DASAN Networks
Last Updated: 2010-08-13
Category: DASAN Networks SLE OLT Management
Description: Manages DASAN Networks SLE OLT fault detection, alarm generation, and event notification for network operations.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SLE-FAULTMGMT-MIB?
SLE-FAULTMGMT-MIB is a DASAN Networks proprietary MIB implementing alarm/fault management across multiple logical entities on SLE-series access equipment. Its objects cover default and per-criteria alarm severity settings and a notification-activity toggle, plus a control-request/status/timer/result mechanism for applying severity or notification changes, alongside notification objects fired when default severity, criteria severity, or notification activity changes, and a severity table tracking per-alarm-type configured severity. As a configuration/status MIB it lets an administrator confirm which alarm types are configured at which severity and confirm a pending severity-change request completed successfully. It is deployed on DASAN Networks SLE-series access equipment. Engineers can download the SLE-FAULTMGMT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SLE-FAULTMGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- DASAN Networks SLE-series access equipment
Monitoring Examples
An administrator issues a severity-change request via sleFaultControlRequest to downgrade a noisy alarm type, then checks sleFaultControlStatus to confirm the change was applied before it stops flooding the alarm log.
What Can Be Monitored
- alarm severity configuration and change-request status
This MIB depends on
Related MIBs
Imported Objects
From DASAN-SMI
| sleMgmt | OBJECT-IDENTITY |
From SLE-TC-MIB
| SleControlRequestResultType | |
| SleControlStatusType |
From SNMPv2-CONF
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| BITS | |
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| TEXTUAL-CONVENTION | |
| TimeStamp |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sleFaultMgmt | 1.3.6.1.4.1.6296.101.4 | The MIB module representing multiple logical entities for the SLE alarm management. | ||
| sleFaultMgmtBase | 1.3.6.1.4.1.6296.101.4.1 | |||
| sleFaultMgmtBaseGroup | 1.3.6.1.4.1.6296.101.4.1.1 | |||
| INT sleFaultDefaultSeverity | 1.3.6.1.4.1.6296.101.4.1.1.1 | INTEGER | read-only | The severity of alarm. |
| INT sleFaultCriteriaSeverity | 1.3.6.1.4.1.6296.101.4.1.1.2 | INTEGER | read-only | The severity of alarm. |
| INT sleFaultNotifiyActivity | 1.3.6.1.4.1.6296.101.4.1.1.3 | INTEGER | read-only | The severity of alarm. |
| C32 sleFaultNextSeqNum | 1.3.6.1.4.1.6296.101.4.1.1.4 | Counter32 | read-only | Sequence number for the alarm synchronization. This value has a number to be used for the next alarm trap. |
| sleFaultMgmtBaseControl | 1.3.6.1.4.1.6296.101.4.1.2 | |||
| INT sleFaultControlRequest | 1.3.6.1.4.1.6296.101.4.1.2.1 | INTEGER | read-write | This attribute identifies the control commands. updateAlarmList: the NE updates entries of alarms in the sleAlarmListTable after having changed alarm severities of alarms (due to change profile pointers in managed entities or after modification of alarm severities in profiles). This command should be applied once after having finisled modifications of severties. modifyAlarmSeverity: modifies the severity of an alarm in specific profile. createAlarmSeverityProfile: creates a new profile with default severities. The severities then have to be modified with command changeAlarmSeverity. deleteAlarmSeverityProfile: deletes a profile. Profile 1 is not allowed to be deleted. Notifications : none |
| SLE sleFaultControlStatus | 1.3.6.1.4.1.6296.101.4.1.2.2 | SleControlStatusType | read-only | The status of a control request. |
| U32 sleFaultControlTimer | 1.3.6.1.4.1.6296.101.4.1.2.3 | Unsigned32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleFaultControlTimeStamp | 1.3.6.1.4.1.6296.101.4.1.2.4 | TimeTicks | read-only | The time stamp of the last command (end of command). |
| SLE sleFaultControlReqResult | 1.3.6.1.4.1.6296.101.4.1.2.5 | SleControlRequestResultType | read-only | The result of the last user command. |
| INT sleFaultControlDefaultSeverity | 1.3.6.1.4.1.6296.101.4.1.2.6 | INTEGER | read-write | The severity of alarm. |
| INT sleFaultControlCriteriaSeverity | 1.3.6.1.4.1.6296.101.4.1.2.7 | INTEGER | read-write | The severity of alarm. |
| INT sleFaultControlNotifiyActivity | 1.3.6.1.4.1.6296.101.4.1.2.8 | INTEGER | read-write | The severity of alarm. |
| sleFaultMgmtBaseNotification | 1.3.6.1.4.1.6296.101.4.1.3 | |||
| NTF sleAlarmDefaultSeverityChanged | 1.3.6.1.4.1.6296.101.4.1.3.1 | Description. | ||
| NTF sleAlarmDefaultCriteriaChanged | 1.3.6.1.4.1.6296.101.4.1.3.2 | Description. | ||
| NTF sleNotificationActivityChanged | 1.3.6.1.4.1.6296.101.4.1.3.3 | Description. | ||
| sleAlarmSeverity | 1.3.6.1.4.1.6296.101.4.2 | |||
| sleAlarmSeverityTable | 1.3.6.1.4.1.6296.101.4.2.1 | not-accessible | The alarm severity table. The alarm severity table associates profile index and AlarmID pairs with severities to be used for alarm traps. (Note that this table does not apply to cleared alarms). | |
| sleAlarmSeverityEntry | 1.3.6.1.4.1.6296.101.4.2.1.1 | not-accessible | Entry of the alarm severity table. | |
| SPE sleAlarmSeverityIndex | 1.3.6.1.4.1.6296.101.4.2.1.1.1 | SpecificNum | read-only | The following alarms is devided by the specific character, ===============. The division basis is that alarms is bounded or released. 001: portDown: To detect whether physical or logical interface's link status is up or down. 002: portUp: =============== 003: portRemoved: To detect whether physical interface is installed or not. 004: portInstalled: =============== 005: powerFail: To detect whether power module's operation status is good or not. (Without doubt, more than 1 power module should be equipped.) 006: powerOK: =============== 007: powerRemoved: To detect whether power module is installed or not, through the PLD access. (Without doubt, more than 1 power module should be equipped.) 008: powerInstalled: =============== 009: fanFail: To detect whether FAN module's operation status is good or not. 010: fanOK: =============== 011: fanRemoved: To detect whether FAN module is installed or not, through the PLD access. 012: fanInstalled: =============== 013: moduleRemoved: To detect whether physical interface module is installed or not, through the S/W I2C 014: moduleInstalled: =============== 015: systemRestart: Network system is restarted by operator. This is not H/W start but S/W start. =============== 016: systemStart: Network system is restarted by operator or system status. This is not S/W start but H/W start. (This alarm isnt used current) =============== 017: broadcastOver: To detect the receipt of broadcast packet. (This alarm isnt used current) 018: broadcastUnder: =============== 019: cpuOverLoad: To detect whether the configured CPU load threshold is less than current CPU load usage or not. 020: cpuUnderLoad: =============== 021: memoryOverUsed: To detect whether the configured memory threshold is less than current memory usage or not. 022: memoryUnderUsed: =============== 023: portOverThreshold: To detect whether the configured physical or logical interface threshold is less than delta value of current interface's InOctects or not. 024: portUnderThreshold: =============== 025: temperatureHigh: To detect whether the configured system's temperature threshold is less than current temperature or not. 026: temperatureLow: =============== 027: mfgdBlocked: To detect whether the specific MAC by MAC flood guard is blocked or not. 028: mfgdReleased: =============== 029: ipConflict: To detect whether the same IP address on different network node is configured or not. 030: ipUnconflict: =============== 031: dhcpLeaseShortage: To detect whether IP address that can be assigned to subscriber by DHCP server is sufficient or not. 032: dhcpLeaseSufficient: =============== 033: dhcpOccuredIllegalEntry: To detect whether a subsceiber is using a static IP address or not. 034: dhcpRemovedIllegalEntry: =============== 035: rmonAlarmRising: To detect whether rising threshold of a specific MO in RMON alarm sampling is less than current calculated value by alarm sample type or not. But alarm generation would be issued by means of event type in RMON event. 036: rmonAlarmNoRising: =============== 037: rmonAlarmFalling: To detect whether falling threshold of a specific MO in RMON alarm sampling is less than current calculated value by alarm sample type or not. But alarm generation would be issued by means of event type in RMON event. 038: rmonAlarmNoFalling: =============== 039: bpduGuardDisabled: To detect whether edge ports is guarded about superior BPDU or not. In case of insertion edge node with 0 or lower priority than priority of current root bridge node, it will be disarrangement during a short time because of recognition a new inserted node as root bridge. So these edge ports is guarded, and then edge ports is blocked about all superior BPDU. So STP reconfiguration doesn't use this edge ports. =============== 040: rootGuardDisabled: To detect whether edge ports is guarded about superior BPDU or not. In case of insertion edge node with 0 or lower priority than priority of current root bridge node, it will be disarrangement during a short time because of recognition a new inserted node as root bridge. So, Root guard prevents a new inserted node from being root bridge as well as receiving a superior BPDU from root bridge. but this node participates in STP topology reconfiguration. If root bridge does not send a superior BPDU, then this node acts usually though STP state change. =============== 041: portSecurity: To detect whether interface is configured for security or not. This can be used to prevent MAC from flooding as well as spoofing. That is, As a result, this will obstruct an attack as like DoS attack. =============== 042: userLogin: 043: userLogout: =============== 051: igmpGroupJoined: To detect whether a subscriber is joined a multicast group or not. 052: igmpGroupLeaved: =============== 053: dhcpIpaddressBound: To detect wether a dynamic IP address is assigned to a subscriber or not. 054: dhcpIpaddressFree: =============== 055: doorOpened: To detect whether outer door is opeded or not, as external alarm. 056: doorClosed: =============== 057: powerModeChangedPowerToBattery: To detect whether a system is using AC power or battery. A system is using AC power usually. If there is any power problems as like a power failure, a system is using battery instead of AC power. 058: powerModeChangedBatteryToPower: =============== 059: batterylowcapacity: To detect whether current battery capacity is less capacity threshold according to battery usage or not. The capacity of AC power is 16 voltage and battery is 20. Capacity threshold is configured by H/W specification. So operator can't change it. 060: batterynormalcapacity: =============== 061: batteryhighTemperature: To detect whether current temperature of battery is greater than temperature threshold or not. 062: batterynormalTemperature: =============== 063: authenticationFail: To detect whether the connected user is authentic or non-authentic. 064: authenticationNofail: =============== 065: psuAcHighTemperature: To detect whether current temperature of Power Supply Unit is greater than temperature threshold or not. 066: psuAcNormalTemperature: =============== 067: batteryRemoved: To detect whether battery is equipped at network system or not. Battery is used as redundancy power service. So operator can decide the installation of battery. 068: batteryEquipped: =============== 069: batteryLowVoltage: To detect whether battery voltage is less than 12.5 volt or not. 12.5 volt value is configured by H/W specification. So operator can't change it. 070: batteryNormalVoltage: =============== 071: adminAccessLogin: To detect whether a operator connects at this network system or not. 072: adminAccessLogout: =============== 073: cfgdBlocked: To detect whether it is blocked flood to CPU or not. 074: cfgdReleased: =============== 075: sfgdBlocked: To detect whether it is blocked flood to system or not. 076: sfgdReleased: =============== 077: swWatchdogAbnormalState: To detect whether a specific process acts normally or not. 078: swWatchdogNormalState: =============== 079: swWatchdogDetectError: To detect whether a specific process is detected a error related to itself or cleared. 080: swWatchdogClearError: =============== 081: ppsControlBlocked: To detect whether it is blocked by pps-control or not. 082: ppsControlReleased: =============== 083: gotDMITempHighOverAlarm: To detect whether internal temperature exceeds high alarm level or not. 084: gotDMITempHighFallAlarm: =============== 085: gotDMITempLowOverAlarm: To detect whether internal temperature is below low alarm level or not. 086: gotDMITempLowFallAlarm: =============== 087: gotDMITempHighOverWarning: To detect whether internal temperature exceeds high warning level or not. 088: gotDMITempHighFallWarning: =============== 089: gotDMITempLowOverWarning: To detect whether internal temperature is below low warning level or not. 090: gotDMITempLowFallWarning: =============== 091: gotDMIVolHighOverAlarm: To detect whether internal supply voltage exceeds high alarm level or not. 092: gotDMIVolHighFallAlarm: =============== 093: gotDMIVolLowOverAlarm: To detect whether internal supply voltage is below low alarm level or not. 094: gotDMIVolLowFallAlarm: =============== 095: gotDMIVolHighOverWarning: To detect whether internal supply voltage exceeds high warning level or not. 096: gotDMIVolHighFallWarning: =============== 097: gotDMIVolLowOverWarning: To detect whether internal supply voltage is below low warning level or not. 098: gotDMIVolLowFallWarning: =============== 099: gotDMITxBiasHighOverAlarm: To detect whether TX Bias current exceeds high alarm level or not. 100: gotDMITxBiasHighFallAlarm: =============== 101: gotDMITxBiasLowOverAlarm: To detect whether TX Bias current is below low alarm level or not. 102: gotDMITxBiasLowFallAlarm: =============== 103: gotDMITxBiasHighOverWarning: To detect whether TX Bias current exceeds high warning level or not. 104: gotDMITxBiasHighFallWarning: =============== 105: gotDMITxBiasLowOverWarning: To detect whether TX Bias current is below low warning level or not. 106: gotDMITxBiasLowFallWarning: =============== 107: gotDMITxPowerHighOverAlarm: To detect whether TX output power exceeds high alarm level or not. 108: gotDMITxPowerHighFallAlarm: =============== 109: gotDMITxPowerLowOverAlarm: To detect whether TX output power is below low alarm level or not. 110: gotDMITxPowerLowFallAlarm: =============== 111: gotDMITxPowerHighOverWarning: To detect whether TX output power exceeds high warning level or not. 112: gotDMITxPowerHighFallWarning: =============== 113: gotDMITxPowerLowOverWarning: To detect whether TX output power is below low warning level or not. 114: gotDMITxPowerLowFallWarning: =============== 115: gotDMIRxPowerHighOverAlarm: To detect whether RX output power exceeds high alarm level or not. 116: gotDMIRxPowerHighFallAlarm: =============== 117: gotDMIRxPowerLowOverAlarm: To detect whether RX output power is below low alarm level or not. 118: gotDMIRxPowerLowFallAlarm: =============== 119: gotDMIRxPowerHighOverWarning: To detect whether RX output power exceeds high warning level or not. 120: gotDMIRxPowerHighFallWarning: =============== 121: gotDMIRxPowerLowOverWarning: To detect whether RX output power is below low warning level or not. 122: gotDMIRxPowerLowFallWarning: =============== 123: nosRemoteUpgradeRequest: 124: nosRemoteUpgradeSuccess: 125: nosRemoteUpgradeFailAbort: 126: nosRemoteUpgradeFailHeaderError: 127: nosRemoteUpgradeFailDownloadError: 128: nosRemoteUpgradeFailFlashError: 129: nosRemoteUpgradeStart: =============== 130: systemDyingGasp: =============== 133: cliHistory: To detect whether CLI history is detected or not. 134: cliHistoryNo: =============== 135: ntpConnectionFail: To detect whether NTP connection is failed or not. 136: ntpConnectionFailNo: =============== 137: nmsConnectionTypeChanged: To detect whether NMS connection type is changed. =============== 159: clockModuleRemoved: To detect whether clock module is removed or installed. 160: clockModuleInstalled: 161: clockModuleInitFail: To detect whether clock module initiolization is failed or not. 162: clockModuleInitOk: =============== 163: cliHistoryLog: To detect whether CLI history log is over or not. 164: cliHistoryLogNo: =============== 165: slotActionEvent: To detect whether slot action is changed. 166: slotStateChange: To detect whether slot state is changed. =============== 167: interfaceAdminDown: To detect whether physical or logical interface's admin link status is up or down. 168: interfaceAdminUp: =============== 169: slotPowerMonAbnormal: To detect whether slot power monitor abnormal or normal is detected. 170: slotPowerMonNormal: =============== 171: slotErrorLEDChanged: To detect whether error LED is changed. =============== 185: cpuPpsOverThreshold: To detect whether PPS is over threshold or not. 186: cpuPpsUnderThreshold: =============== 199: slotHealthStatusTimeout: To detect whether slot health status is time out or not. 200: slotHealthStatusTimeoutCleared: =============== 201: advaTemperature: To detect whether current chassis temperature is less than chassis temperature threshold or not. 202: advaTemperatureNo: =============== 203: advaPSUFailure: To detect whether ADVA system's power supply unit has a failure or not. 204: advaPSUFailureNo: =============== 205: advaFanFailure: To detect whether ADVA system's FAN has a failure or not. 206: advaFanFailureNo: =============== 207: advaInterfaceReceiveFailure: To detect whether ADVA system's receipt has a failure or not. 208: advaInterfaceReceiveFailureNo: =============== 209: advaInterfaceOpticalThreshold: To detect whether Adva system's optical receive power level is less than optical threshold or not. 210: advaInterfaceOpticalThresholdNo: =============== 211: advaInterfaceTransmitFault: To detect whether ADVA system's transmission has a failure or not. 212: advaInterfaceTransmitFaultNo: =============== 213: dvaInterfaceMisconfiguration: To detect whether ADVA system's interface is configured rightly or not. 214: advaInterfaceMisconfigurationNo: =============== 215: advaInterfaceSFPMismatch: To detect whether ADVA system's SFP interface is mismatched or not. 216: advaInterfaceSFPMismatchNo: =============== 217: advaVoltageLow: To detect whether ADVA system's current voltage is less than voltage threshold or not. 218: advaVoltageLowNo: =============== 219: advaVoltageHigh: To detect whether ADVA system's current voltage is greater than voltage threshold or not. 220: advaVoltageHighNo: =============== 301: erpDomainLotp: To detect whether LOTP(Loss of Test Packet) exists a domain of ERP or not. The Loss of Test Packet defect is defined when a node does not receive any test packet at any of its ports for a period of 3 times. 302: erpDomainLotpNo: =============== 303: erpDomainULotp: To detect whether undirectional LOTP(Loss of Test Packet) exists a domain of ERP or not. The Loss of Test Packet defect is defined when a RM node of one domain does not receive any test packet at one port for a period of 3 times. 304: erpDomainULotpNo: =============== 305: erpDomainMultipleRM: To detect whether Multiple RM node is supported or not. The defect is raised when a RM node receives its own test packets with an Ack destination address field with a non-zero value. 306: erpDomainMultipleRMNo: =============== 307: erpDomainRMNodeReacheablity: To detect whether RM reachability is raised or not. The detection of multiple failures indicates that the ring is segmented and that the RM Node is unreacheable. This is only possible at normal ring nodes isolated from the RM node. 308: erpDomainRMNodeReacheablityNo: =============== 391: startupConfigLoadEnded: To detect whether startup configuration load is ended. =============== 401: eponOnuDeregister: To detect whether ONU is registered into OLT or not. That is, ONU that its operation is service on should be sent registration information to OLT. 402: eponOnuRegister: =============== 403: eponOnuRegistrationError: To detect whether ONU is failed registeration process into OLT. 404: eponOnuNoRegistrationError: =============== 405: eponBadEncryptionKey: To detect wwhether the encryption key is valid or not. A message between ONU and OLT is encrypted using random encryption key. There is that the encryption key is invalid as transmission failure from time to time. 406: eponNoBadEncryptionKey: =============== 407: eponLlidMistmatch: To detect whether Llid of message between ONU and OLT is valid or not. On registering, ONU informs unique ID to OLT. And then, all communication between ONU and OLT must use the unique ID. The unique ID is called Llid. 408: eponNoLlidMismatch: =============== 409: eponTooManyRegister: To detect whether the registered ONU per 1 OLT is greater than 32 or not. That is, ONU can be registered from 1 to the maximum 32 at 1 OLT. 410: eponNoTooManyRegister: =============== 411: eponDyingGASP: To detect whether a ONU is down from dying gasp or not. A ONU could be changed to down state as a number of reasons. By the way, ONU that is changed to down as dying gasp would be sent dying gasp signal to OLT and then ONU's link would be changed to down. 412: eponNoDyingGASP: =============== 413: eponOnuErrFramePeriod: 414: eponOnuNoErrFramePeriod: =============== 415: eponOnuErrFrame: 416: eponOnuNoErrFrame: =============== 417: eponOnuErrFrameSecondSummary: 418: eponOnuNoErrFrameSecondSummary: =============== 419: eponOnuLastOnuDeregister: To detect whether a deregistered ONU is last ONU or not. If a deregistered ONU is last ONU, the OLT would be changed to serviceable status. 420: eponOnuNoLastOnuDeregister: =============== 421: eponOltCableDown: 422: eponOltRecoverCableDown: =============== 501: autoCLIStart: To detect whether the scheduled auto CLI is started or not. 502: autoCLINoStart: =============== 503: autoCLIComplete: To detect whether the scheduled auto CLI is completed or not. 504: autoCLINoComplete: =============== 505: autoCLIRemoveOutputFile: To detect whether the result file of the scheduled auto CLI is removed or not. The reason that the result file is removed is that the configured file size for the result is less than the stored result file size. If so, the oldest file would be removed before everything. 506: autoCLINoRemoveOutputFile: =============== 507: autoResetSystem: To detect whether the system is restarted or not. The conditions that system is restarted is that ping loss threshold is less than current ping loss count during the configured interval and that current free memory size is less than configured free memory size. 508: autoResetNoSystem: =============== 509: autoResetPingReplyLoss: To detect whether ping reply from the designated network node is received or not. Operator designates any gateway system that can communicate to detect current network environment. System sends ICMP packet to the designated gateway system periodically. If the system doesn't receive ping reply packet within any interval, operator recognizes that the system can't communicate any more because of some problems of the system. 510: autoResetNoPingReplyLoss: =============== 511: autoResetMemoryLeakDetect: To detect whether current free memory size is less than the configured free memory size or not. Periodically, free memory size is checked to confirm system availability. 512: autoResetNoMemoryLeakDetect: =============== 601: arulePacketDropDetect: To detect whether it is dropped some packet by arule or not. 602: arulePacketDropRelease: =============== 620: bME1CardNoDetect: 621: clearBME1CardNoDetect: =============== 622: bME1CardAFEerror: 623: clearBME1CardAFEerror: =============== 624: bME1CardIFEerror: 625: clearBME1CardIFEerror: =============== 626: bME1CardFWerror: 627: clearBME1CardFWerror: =============== 628: bME1CardPROVerror: 629: clearBME1CardPROVerror: =============== 630: bME1CrashDetect: 631: clearBME1CrashDetect: =============== 632: bME2CardNoDetect: 633: clearBME2CardNoDetect: =============== 634: bME2CardAFEerror: 635: clearBME2CardAFEerror: =============== 636: bME2CardIFEerror: 637: clearBME2CardIFEerror: =============== 638: bME2CardFWerror: 639: clearBME2CardFWerror: =============== 640: bME2CardPROVerror: 641: clearBME2CardPROVerror: =============== 642: bME2CrashDetect: 643: clearBME2CrashDetect: =============== 644: bME3CardNoDetect: 645: clearBME3CardNoDetect: =============== 646: bME3CardAFEerror: 647: clearBME3CardAFEerror: =============== 648: bME3CardIFEerror: 649: clearBME3CardIFEerror: =============== 650: bME3CardFWerror: 651: clearBME3CardFWerror: =============== 652: bME3CardPROVerror: 653: clearBME3CardPROVerror: =============== 654: bME3CrashDetect: 655: clearBME3CrashDetect: =============== 656: powerFromBattery: 657: clearPowerFromBattery: =============== 658: invalidBatteryStatus: 659: clearInvalidBatteryStatus: =============== 660: batteryChargeLow: 661: clearBatteryChargeLow: =============== 662: batteryNotPresent: 663: clearBatteryNotPresent: =============== 664: voltageLow: 665: clearVoltageLow: =============== 666: tempOverThreshold: 667: clearTempOverThreshold: =============== 668: tempUnderThreshold: 669: clearTempUnderThreshold: =============== 670: cpuOverThreshold: 671: clearCpuOverThreshold: =============== 672: trafficOverload: 673: clearTrafficOverload: =============== 674: gEPONModuleNotDetect: 675: clearGEPONModuleNotDetect: =============== 676: gEPONPortOperationDown: 677: clearGEPONPortOperationDown: =============== 678: gEPONNoIncomingTraffic: 679: clearGEPONNoIncomingTraffic: =============== 680: processCrashDetect: 681: clearProcessCrashDetect: =============== 682: memoryLeakDetect: 683: clearMemoryLeakDetect: =============== 684: memoryCorrupDetect: 685: clearMemoryCorrupDetect: =============== 686: memoryLowDetect: 687: clearMemoryLowDetect: =============== 688: dataLineerror: 689: clearDataLineerror: =============== 690: addressLineerror: 691: clearAddressLineerror: =============== 692: chipsetNotDetcet: 693: clearChipsetNotDetcet: =============== 694: pciBuserror: 695: clearPciBuserror: =============== 696: securityAdminConnect: 697: clearSecurityAdminConnect: =============== 698: oNUPowerDown: 699: clearONUPowerDown: =============== 700: oNUNotRegister: 701: clearONUNotRegister: =============== 702: oNTOpticPre: 703: clearONTOpticPre: =============== 800: switchoverInitiated: =============== 801: switchoverDone: =============== 803: redConfigurationMisMatch: To detect whether redundancy configuration is mismatched. =============== 901: gponNoAuthCBU: To detect no auth CBU is detected. 902: gponDuplicateONU: To detect ONU is duplicated. 903: gponDyingGasp: To detect dying GASP is detected. 904: gponUpgradeComplete: To detect upgrade complete is detected. 905: gponDeregistered: To detect whether deregistered is detected or not. 906: gponRegistered: 907: gponRogueOnu: To detect rogue ONU is detected 908: gponOnuBatteryEvent: To detect whether ONU battery event is detected or not. 909: clearGponOnuBetteryEvent: 910: gponOnuPortOperStatus: To detectONU port operation statue is chagned. 911: gponTransceiverChanged: To detect transceiver is changed. 912: gponOltLosOn: To detect whether OLT LOS is on or off 913: gponOltLosOff: 914: gponOltLosiOn: To detect whether OLT LOSI is on or off 915: gponOltLosiOff: 916: gponDyingGaspOn: To detect whether dying GASP is on or off 917: gponDyingGaspOff: 918: gponOntOSUpgradeStatus: To detect ONT OS upgrade status is changed. 919: gponOntBLUpgradeStatus: To detect BL upgrade status is changed. 920: gponOltRxPowerLoss: To detect OLT RX power is loss. 921: gponOltRxPowerDetected: To detect OLT RX power status is changed. 922: gponOnuTemperatureHighOverThreshold: To detect whether ONU temperature exceeds high threshold or not. 923: gponOnuTemperatureHighFallThreshold: 924: gponOnuTemperatureLowOverThreshold: To detect whether ONU temperature belows low threshold or not. 925: gponOnuTemperatureLowFallThreshold: 926: gponOnuCpuOverThreshold: To detect whether ONU CPU exceeds threshold or not. 927: gponOnuCpuFallThreshold: 928: gponOnuMemoryOverThreshold: To detect whether memory exceeds threshold or not. 929: gponOnuMemoryFallThreshold: 930: gponOnuI2cFail: To detect ONU L2C fail is detected. 931: gponOnuRxOpticLowThreshAlarmOn: To detect whether ONU RX optic belows low threshold or not. 932: gponOnuRxOpticLowThreshAlarmOff: 933: gponOnuRxOpticHighThreshAlarmOn: To detect whether ONU RX optic exceeds high threshold or not. 934: gponOnuRxOpticHighThreshAlarmOff: 935: gponOltLOFIOn: To detect whether OLT LOFL is on or off 936: gponOltLOFIOff: 937: gponOltDOWOn: To detect whether OLT DOW is on or off 938: gponOltDOWOff: 939: gponOltSFOn: To detect whether OLT SF is on or off 940: gponOltSFOff: 941: gponOltSDOn: To detect whether OLT SD is on or off 942: gponOltSDOff: 943: gponOltLCDGIOn: To detect whether OLT LCDGL is on or off 944: gponOltLCDGIOff: 945: gponOltRDOn: To detect whether OLT RD is on or off 946: gponOltRDOff: 947: gponOltSUFOn: To detect whether OLT SUF is on or off 948: gponOltSUFOff: 949: gponOltLOAOn: To detect whether OLT LOA is on or off 950: gponOltLOAOff: 951: gponOltLOAMIOn: To detect whether OLT LOAML is on or off 952: gponOltLOAMIOff: 953: gponOltMEMOn: To detect whether OLT MEM is on or off 954: gponOltMEMOff: 955: gponOltPEEOn: To detect whether OLT PEE is on or off 956: gponOltPEEOff: 957: gponOltPSTOn: To detect whether OLT PST is on or off 958: gponOltPSTOff: 959: gponOltERROn: To detect whether OLT ERR is on or off 960: gponOltERROff: 961: gponOltREIOn: To detect whether OLT REI is on or off 962: gponOltREIOff: 963: gponAntiSpoofingDupPortOn: To detect whether anti spoofing port is duplicated or not. 964: gponAntiSpoofingDupPortOff: 965: gponRedundancySwitchOver: To detect redundancy switchover is changed. 966: gponDuplicatedRangingResponse: To detect ranging response is changed. 967: gponOnuPortOpticModuleRemove: To detect whether ONU port optic module is removed or installed. 968: gponOnuPortOpticModuleInstall: 969: gponOnuOMCCProblemDetected: To detect whether ONU OMCC problem is detected or not. 970: gponOnuOMCCProblemCleared: 971: gponOltFixedTcontAlarmOn: To detect whether OLT fixed Tcont alarm is on or off. 972: gponOltFixedTcontAlarmOff: 973: gponOltDynamicTcontAlarmOn: To detect whether OLT dynamic Tcont alarm is on or off. 974: gponOltDynamicTcontAlarmOff: 975: gponOltPortCountAlarmOn: To detect whether OLT port count alarm is on or off. 976: gponOltPortCountAlarmOff: 977: gponOltCableDownAlarmOn: To detect whether OLT cable down alarm is on or off. 978: gponOltCableDownAlarmOff: 979: gponOltDeactiveMonitorAlarmOn: To detect whether deactive monitor alarm is on or off. 980: gponOltDeactiveMonitorAlarmOff: 981: gponOltDfiOn: To detect whether OLT DFI is on or off. 982: gponOltDfiOff: 984: gponOltTransceiverPortChanged: To detect OLT transeiver port is changed. 985: gponOnuPortOperStatusDown: To detect whether ONU port operation status is down or up. 986: gponOnuPortOperStatusUp:: =============== 1101: emLogDefectCPUHighOver: To detect whether EM log detect CPU exceeds threshold or not. 1102: emLogDefectCPUHighUnder: 1103: emLogTemperHighOver: To detect whether EM log temperature exceeds high threshold or not. 1104: emLogTemperHighUnder: 1105: emLogTemperLowUnder: To detect whether EM log CPU belows low threshold or not. 1106: emLogTemperLowOver: 1107: emLogMemLowUnder: To detect whether EM log memory belows low threshold or not. 1108: emLogMemLowOver: 1109: emLogFanFail: To detect whether EM log fan status is failed or not. 1110: emLogFanFailCleared: 1111: emLogPhyCRCFail: To detect whether EM log physical CRC is failed or not. 1112: emLogPhyCRCFailCleared: 1113: emLogPhyDetectFail: To detect whether EM log physical status is failed or not. 1114: emLogPhyDetectFailCleared: 1115: emLogSFUMateInitFail: To detect whether EM log SFU mate initialization is failed or not. 1116: emLogSFUMateInitFailCleared: 1117: emLogDaemonHealthBad: To detect whether EM log daemon health is bad or not. 1118: emLogDaemonHealthBadCleared: 1119: emLogGPIURavenLinkDown: To detect whether EM log GPIU RAVEN link is down or not. 1120: emLogGPIURavenLinkDownCleared: =============== 1151: slotNosUpgradeStart: To detect whether slot NOS upgrade is started or ended. 1152: slotNosUpgradeEnd: =============== 1331: gponOnuAniVoltageLowThreshAlarmOn: To detect whether ONU ANI voltage belows low threshold or not. 1332: gponOnuAniVoltageLowThreshAlarmOff: 1333: gponOnuAniVoltageHighThreshAlarmOn: To detect whether ONU ANI voltage exceeds high threshold or not. 1334: gponOnuAniVoltageHighThreshAlarmOff: 1335: gponOnuAniTemperatureLowThreshAlarmOn: To detect whether ONU ANI temperature belows low threshold or not. 1336: gponOnuAniTemperatureLowThreshAlarmOff: 1337: gponOnuAniTemperatureHighThreshAlarmOn: To detect whether ONU ANI temperature exceeds high threshold or not. 1338: gponOnuAniTemperatureHighThreshAlarmOff: 1339: gponOnuAniTxBiasLowThreshAlarmOn: To detect whether ONU ANI TX bias belows low threshold or not. 1340: gponOnuAniTxBiasLowThreshAlarmOff: 1341: gponOnuAniTxBiasHighThreshAlarmOn: To detect whether ONU ANI TX bias exceeds high threshold or not. 1342: gponOnuAniTxBiasHighThreshAlarmOff: 1343: gponOnuAniTxpowerLowThreshAlarmOn: To detect whether ONU ANI TX power belows low threshold or not. 1344: gponOnuAniTxpowerLowThreshAlarmOff: 1345: gponOnuAniTxpowerHighThreshAlarmOn: To detect whether ONU ANI TX power exceeds high threshold or not. 1346: gponOnuAniTxpowerHighThreshAlarmOff: |
| INT sleAlarmSeverityValue | 1.3.6.1.4.1.6296.101.4.2.1.1.2 | INTEGER | read-only | The severity of alarm. |
| sleAlarmSeverityControl | 1.3.6.1.4.1.6296.101.4.2.2 | |||
| INT sleAlarmSeverityControlRequest | 1.3.6.1.4.1.6296.101.4.2.2.1 | INTEGER | read-write | This attribute identifies the control commands. updateAlarmList: the NE updates entries of alarms in the sleAlarmListTable after having changed alarm severities of alarms (due to change profile pointers in managed entities or after modification of alarm severities in profiles). This command should be applied once after having finisled modifications of severties. modifyAlarmSeverity: modifies the severity of an alarm in specific profile. createAlarmSeverityProfile: creates a new profile with default severities. The severities then have to be modified with command changeAlarmSeverity. deleteAlarmSeverityProfile: deletes a profile. Profile 1 is not allowed to be deleted. Notifications : none |
| SLE sleAlarmSeverityControlStatus | 1.3.6.1.4.1.6296.101.4.2.2.2 | SleControlStatusType | read-only | The status of a control request. |
| U32 sleAlarmSeverityControlTimer | 1.3.6.1.4.1.6296.101.4.2.2.3 | Unsigned32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleAlarmSeverityControlTimeStamp | 1.3.6.1.4.1.6296.101.4.2.2.4 | TimeTicks | read-only | The time stamp of the last command (end of command). |
| SLE sleAlarmSeverityControlReqResult | 1.3.6.1.4.1.6296.101.4.2.2.5 | SleControlRequestResultType | read-only | The result of the last user command. |
| SPE sleAlarmSeverityControlIndex | 1.3.6.1.4.1.6296.101.4.2.2.6 | SpecificNum | read-write | A number identifying this alarm severity profile. The following alarms is devided by the specific character, ===============. The division basis is that alarms is bounded or released. 001: portDown: To detect whether physical or logical interface's link status is up or down. 002: portUp: =============== 003: portRemoved: To detect whether physical interface is installed or not. 004: portInstalled: =============== 005: powerFail: To detect whether power module's operation status is good or not. (Without doubt, more than 1 power module should be equipped.) 006: powerOK: =============== 007: powerRemoved: To detect whether power module is installed or not, through the PLD access. (Without doubt, more than 1 power module should be equipped.) 008: powerInstalled: =============== 009: fanFail: To detect whether FAN module's operation status is good or not. 010: fanOK: =============== 011: fanRemoved: To detect whether FAN module is installed or not, through the PLD access. 012: fanInstalled: =============== 013: moduleRemoved: To detect whether physical interface module is installed or not, through the S/W I2C 014: moduleInstalled: =============== 015: systemRestart: Network system is restarted by operator. This is not H/W start but S/W start. =============== 016: systemStart: Network system is restarted by operator or system status. This is not S/W start but H/W start. (This alarm isnt used current) =============== 017: broadcastOver: To detect the receipt of broadcast packet. (This alarm isnt used current) 018: broadcastUnder: =============== 019: cpuOverLoad: To detect whether the configured CPU load threshold is less than current CPU load usage or not. 020: cpuUnderLoad: =============== 021: memoryOverUsed: To detect whether the configured memory threshold is less than current memory usage or not. 022: memoryUnderUsed: =============== 023: portOverThreshold: To detect whether the configured physical or logical interface threshold is less than delta value of current interface's InOctects or not. 024: portUnderThreshold: =============== 025: temperatureHigh: To detect whether the configured system's temperature threshold is less than current temperature or not. 026: temperatureLow: =============== 027: mfgdBlocked: To detect whether the specific MAC by MAC flood guard is blocked or not. 028: mfgdReleased: =============== 029: ipConflict: To detect whether the same IP address on different network node is configured or not. 030: ipUnconflict: =============== 031: dhcpLeaseShortage: To detect whether IP address that can be assigned to subscriber by DHCP server is sufficient or not. 032: dhcpLeaseSufficient: =============== 033: dhcpOccuredIllegalEntry: To detect whether a subsceiber is using a static IP address or not. 034: dhcpRemovedIllegalEntry: =============== 035: rmonAlarmRising: To detect whether rising threshold of a specific MO in RMON alarm sampling is less than current calculated value by alarm sample type or not. But alarm generation would be issued by means of event type in RMON event. 036: rmonAlarmNoRising: =============== 037: rmonAlarmFalling: To detect whether falling threshold of a specific MO in RMON alarm sampling is less than current calculated value by alarm sample type or not. But alarm generation would be issued by means of event type in RMON event. 038: rmonAlarmNoFalling: =============== 039: bpduGuardDisabled: To detect whether edge ports is guarded about superior BPDU or not. In case of insertion edge node with 0 or lower priority than priority of current root bridge node, it will be disarrangement during a short time because of recognition a new inserted node as root bridge. So these edge ports is guarded, and then edge ports is blocked about all superior BPDU. So STP reconfiguration doesn't use this edge ports. =============== 040: rootGuardDisabled: To detect whether edge ports is guarded about superior BPDU or not. In case of insertion edge node with 0 or lower priority than priority of current root bridge node, it will be disarrangement during a short time because of recognition a new inserted node as root bridge. So, Root guard prevents a new inserted node from being root bridge as well as receiving a superior BPDU from root bridge. but this node participates in STP topology reconfiguration. If root bridge does not send a superior BPDU, then this node acts usually though STP state change. =============== 041: portSecurity: To detect whether interface is configured for security or not. This can be used to prevent MAC from flooding as well as spoofing. That is, As a result, this will obstruct an attack as like DoS attack. =============== 042: userLogin: 043: userLogout: =============== 051: igmpGroupJoined: To detect whether a subscriber is joined a multicast group or not. 052: igmpGroupLeaved: =============== 053: dhcpIpaddressBound: To detect wether a dynamic IP address is assigned to a subscriber or not. 054: dhcpIpaddressFree: =============== 055: doorOpened: To detect whether outer door is opeded or not, as external alarm. 056: doorClosed: =============== 057: powerModeChangedPowerToBattery: To detect whether a system is using AC power or battery. A system is using AC power usually. If there is any power problems as like a power failure, a system is using battery instead of AC power. 058: powerModeChangedBatteryToPower: =============== 059: batterylowcapacity: To detect whether current battery capacity is less capacity threshold according to battery usage or not. The capacity of AC power is 16 voltage and battery is 20. Capacity threshold is configured by H/W specification. So operator can't change it. 060: batterynormalcapacity: =============== 061: batteryhighTemperature: To detect whether current temperature of battery is greater than temperature threshold or not. 062: batterynormalTemperature: =============== 063: authenticationFail: To detect whether the connected user is authentic or non-authentic. 064: authenticationNofail: =============== 065: psuAcHighTemperature: To detect whether current temperature of Power Supply Unit is greater than temperature threshold or not. 066: psuAcNormalTemperature: =============== 067: batteryRemoved: To detect whether battery is equipped at network system or not. Battery is used as redundancy power service. So operator can decide the installation of battery. 068: batteryEquipped: =============== 069: batteryLowVoltage: To detect whether battery voltage is less than 12.5 volt or not. 12.5 volt value is configured by H/W specification. So operator can't change it. 070: batteryNormalVoltage: =============== 071: adminAccessLogin: To detect whether a operator connects at this network system or not. 072: adminAccessLogout: =============== 073: cfgdBlocked: To detect whether it is blocked flood to CPU or not. 074: cfgdReleased: =============== 075: sfgdBlocked: To detect whether it is blocked flood to system or not. 076: sfgdReleased: =============== 077: swWatchdogAbnormalState: To detect whether a specific process acts normally or not. 078: swWatchdogNormalState: =============== 079: swWatchdogDetectError: To detect whether a specific process is detected a error related to itself or cleared. 080: swWatchdogClearError: =============== 081: ppsControlBlocked: To detect whether it is blocked by pps-control or not. 082: ppsControlReleased: =============== 083: gotDMITempHighOverAlarm: To detect whether internal temperature exceeds high alarm level or not. 084: gotDMITempHighFallAlarm: =============== 085: gotDMITempLowOverAlarm: To detect whether internal temperature is below low alarm level or not. 086: gotDMITempLowFallAlarm: =============== 087: gotDMITempHighOverWarning: To detect whether internal temperature exceeds high warning level or not. 088: gotDMITempHighFallWarning: =============== 089: gotDMITempLowOverWarning: To detect whether internal temperature is below low warning level or not. 090: gotDMITempLowFallWarning: =============== 091: gotDMIVolHighOverAlarm: To detect whether internal supply voltage exceeds high alarm level or not. 092: gotDMIVolHighFallAlarm: =============== 093: gotDMIVolLowOverAlarm: To detect whether internal supply voltage is below low alarm level or not. 094: gotDMIVolLowFallAlarm: =============== 095: gotDMIVolHighOverWarning: To detect whether internal supply voltage exceeds high warning level or not. 096: gotDMIVolHighFallWarning: =============== 097: gotDMIVolLowOverWarning: To detect whether internal supply voltage is below low warning level or not. 098: gotDMIVolLowFallWarning: =============== 099: gotDMITxBiasHighOverAlarm: To detect whether TX Bias current exceeds high alarm level or not. 100: gotDMITxBiasHighFallAlarm: =============== 101: gotDMITxBiasLowOverAlarm: To detect whether TX Bias current is below low alarm level or not. 102: gotDMITxBiasLowFallAlarm: =============== 103: gotDMITxBiasHighOverWarning: To detect whether TX Bias current exceeds high warning level or not. 104: gotDMITxBiasHighFallWarning: =============== 105: gotDMITxBiasLowOverWarning: To detect whether TX Bias current is below low warning level or not. 106: gotDMITxBiasLowFallWarning: =============== 107: gotDMITxPowerHighOverAlarm: To detect whether TX output power exceeds high alarm level or not. 108: gotDMITxPowerHighFallAlarm: =============== 109: gotDMITxPowerLowOverAlarm: To detect whether TX output power is below low alarm level or not. 110: gotDMITxPowerLowFallAlarm: =============== 111: gotDMITxPowerHighOverWarning: To detect whether TX output power exceeds high warning level or not. 112: gotDMITxPowerHighFallWarning: =============== 113: gotDMITxPowerLowOverWarning: To detect whether TX output power is below low warning level or not. 114: gotDMITxPowerLowFallWarning: =============== 115: gotDMIRxPowerHighOverAlarm: To detect whether RX output power exceeds high alarm level or not. 116: gotDMIRxPowerHighFallAlarm: =============== 117: gotDMIRxPowerLowOverAlarm: To detect whether RX output power is below low alarm level or not. 118: gotDMIRxPowerLowFallAlarm: =============== 119: gotDMIRxPowerHighOverWarning: To detect whether RX output power exceeds high warning level or not. 120: gotDMIRxPowerHighFallWarning: =============== 121: gotDMIRxPowerLowOverWarning: To detect whether RX output power is below low warning level or not. 122: gotDMIRxPowerLowFallWarning: =============== 123: nosRemoteUpgradeRequest: 124: nosRemoteUpgradeSuccess: 125: nosRemoteUpgradeFailAbort: 126: nosRemoteUpgradeFailHeaderError: 127: nosRemoteUpgradeFailDownloadError: 128: nosRemoteUpgradeFailFlashError: 129: nosRemoteUpgradeStart: =============== 130: systemDyingGasp: =============== 133: cliHistory: To detect whether CLI history is detected or not. 134: cliHistoryNo: =============== 135: ntpConnectionFail: To detect whether NTP connection is failed or not. 136: ntpConnectionFailNo: =============== 137: nmsConnectionTypeChanged: To detect whether NMS connection type is changed. =============== 159: clockModuleRemoved: To detect whether clock module is removed or installed. 160: clockModuleInstalled: 161: clockModuleInitFail: To detect whether clock module initiolization is failed or not. 162: clockModuleInitOk: =============== 163: cliHistoryLog: To detect whether CLI history log is over or not. 164: cliHistoryLogNo: =============== 165: slotActionEvent: To detect whether slot action is changed. 166: slotStateChange: To detect whether slot state is changed. =============== 167: interfaceAdminDown: To detect whether physical or logical interface's admin link status is up or down. 168: interfaceAdminUp: =============== 169: slotPowerMonAbnormal: To detect whether slot power monitor abnormal or normal is detected. 170: slotPowerMonNormal: =============== 171: slotErrorLEDChanged: To detect whether error LED is changed. =============== 185: cpuPpsOverThreshold: To detect whether PPS is over threshold or not. 186: cpuPpsUnderThreshold: =============== 199: slotHealthStatusTimeout: To detect whether slot health status is time out or not. 200: slotHealthStatusTimeoutCleared: =============== 201: advaTemperature: To detect whether current chassis temperature is less than chassis temperature threshold or not. 202: advaTemperatureNo: =============== 203: advaPSUFailure: To detect whether ADVA system's power supply unit has a failure or not. 204: advaPSUFailureNo: =============== 205: advaFanFailure: To detect whether ADVA system's FAN has a failure or not. 206: advaFanFailureNo: =============== 207: advaInterfaceReceiveFailure: To detect whether ADVA system's receipt has a failure or not. 208: advaInterfaceReceiveFailureNo: =============== 209: advaInterfaceOpticalThreshold: To detect whether Adva system's optical receive power level is less than optical threshold or not. 210: advaInterfaceOpticalThresholdNo: =============== 211: advaInterfaceTransmitFault: To detect whether ADVA system's transmission has a failure or not. 212: advaInterfaceTransmitFaultNo: =============== 213: dvaInterfaceMisconfiguration: To detect whether ADVA system's interface is configured rightly or not. 214: advaInterfaceMisconfigurationNo: =============== 215: advaInterfaceSFPMismatch: To detect whether ADVA system's SFP interface is mismatched or not. 216: advaInterfaceSFPMismatchNo: =============== 217: advaVoltageLow: To detect whether ADVA system's current voltage is less than voltage threshold or not. 218: advaVoltageLowNo: =============== 219: advaVoltageHigh: To detect whether ADVA system's current voltage is greater than voltage threshold or not. 220: advaVoltageHighNo: =============== 301: erpDomainLotp: To detect whether LOTP(Loss of Test Packet) exists a domain of ERP or not. The Loss of Test Packet defect is defined when a node does not receive any test packet at any of its ports for a period of 3 times. 302: erpDomainLotpNo: =============== 303: erpDomainULotp: To detect whether undirectional LOTP(Loss of Test Packet) exists a domain of ERP or not. The Loss of Test Packet defect is defined when a RM node of one domain does not receive any test packet at one port for a period of 3 times. 304: erpDomainULotpNo: =============== 305: erpDomainMultipleRM: To detect whether Multiple RM node is supported or not. The defect is raised when a RM node receives its own test packets with an Ack destination address field with a non-zero value. 306: erpDomainMultipleRMNo: =============== 307: erpDomainRMNodeReacheablity: To detect whether RM reachability is raised or not. The detection of multiple failures indicates that the ring is segmented and that the RM Node is unreacheable. This is only possible at normal ring nodes isolated from the RM node. 308: erpDomainRMNodeReacheablityNo: =============== 391: startupConfigLoadEnded: To detect whether startup configuration load is ended. =============== 401: eponOnuDeregister: To detect whether ONU is registered into OLT or not. That is, ONU that its operation is service on should be sent registration information to OLT. 402: eponOnuRegister: =============== 403: eponOnuRegistrationError: To detect whether ONU is failed registeration process into OLT. 404: eponOnuNoRegistrationError: =============== 405: eponBadEncryptionKey: To detect wwhether the encryption key is valid or not. A message between ONU and OLT is encrypted using random encryption key. There is that the encryption key is invalid as transmission failure from time to time. 406: eponNoBadEncryptionKey: =============== 407: eponLlidMistmatch: To detect whether Llid of message between ONU and OLT is valid or not. On registering, ONU informs unique ID to OLT. And then, all communication between ONU and OLT must use the unique ID. The unique ID is called Llid. 408: eponNoLlidMismatch: =============== 409: eponTooManyRegister: To detect whether the registered ONU per 1 OLT is greater than 32 or not. That is, ONU can be registered from 1 to the maximum 32 at 1 OLT. 410: eponNoTooManyRegister: =============== 411: eponDyingGASP: To detect whether a ONU is down from dying gasp or not. A ONU could be changed to down state as a number of reasons. By the way, ONU that is changed to down as dying gasp would be sent dying gasp signal to OLT and then ONU's link would be changed to down. 412: eponNoDyingGASP: =============== 413: eponOnuErrFramePeriod: 414: eponOnuNoErrFramePeriod: =============== 415: eponOnuErrFrame: 416: eponOnuNoErrFrame: =============== 417: eponOnuErrFrameSecondSummary: 418: eponOnuNoErrFrameSecondSummary: =============== 419: eponOnuLastOnuDeregister: To detect whether a deregistered ONU is last ONU or not. If a deregistered ONU is last ONU, the OLT would be changed to serviceable status. 420: eponOnuNoLastOnuDeregister: =============== 421: eponOltCableDown: 422: eponOltRecoverCableDown: =============== 501: autoCLIStart: To detect whether the scheduled auto CLI is started or not. 502: autoCLINoStart: =============== 503: autoCLIComplete: To detect whether the scheduled auto CLI is completed or not. 504: autoCLINoComplete: =============== 505: autoCLIRemoveOutputFile: To detect whether the result file of the scheduled auto CLI is removed or not. The reason that the result file is removed is that the configured file size for the result is less than the stored result file size. If so, the oldest file would be removed before everything. 506: autoCLINoRemoveOutputFile: =============== 507: autoResetSystem: To detect whether the system is restarted or not. The conditions that system is restarted is that ping loss threshold is less than current ping loss count during the configured interval and that current free memory size is less than configured free memory size. 508: autoResetNoSystem: =============== 509: autoResetPingReplyLoss: To detect whether ping reply from the designated network node is received or not. Operator designates any gateway system that can communicate to detect current network environment. System sends ICMP packet to the designated gateway system periodically. If the system doesn't receive ping reply packet within any interval, operator recognizes that the system can't communicate any more because of some problems of the system. 510: autoResetNoPingReplyLoss: =============== 511: autoResetMemoryLeakDetect: To detect whether current free memory size is less than the configured free memory size or not. Periodically, free memory size is checked to confirm system availability. 512: autoResetNoMemoryLeakDetect: =============== 601: arulePacketDropDetect: To detect whether it is dropped some packet by arule or not. 602: arulePacketDropRelease: =============== 620: bME1CardNoDetect: 621: clearBME1CardNoDetect: =============== 622: bME1CardAFEerror: 623: clearBME1CardAFEerror: =============== 624: bME1CardIFEerror: 625: clearBME1CardIFEerror: =============== 626: bME1CardFWerror: 627: clearBME1CardFWerror: =============== 628: bME1CardPROVerror: 629: clearBME1CardPROVerror: =============== 630: bME1CrashDetect: 631: clearBME1CrashDetect: =============== 632: bME2CardNoDetect: 633: clearBME2CardNoDetect: =============== 634: bME2CardAFEerror: 635: clearBME2CardAFEerror: =============== 636: bME2CardIFEerror: 637: clearBME2CardIFEerror: =============== 638: bME2CardFWerror: 639: clearBME2CardFWerror: =============== 640: bME2CardPROVerror: 641: clearBME2CardPROVerror: =============== 642: bME2CrashDetect: 643: clearBME2CrashDetect: =============== 644: bME3CardNoDetect: 645: clearBME3CardNoDetect: =============== 646: bME3CardAFEerror: 647: clearBME3CardAFEerror: =============== 648: bME3CardIFEerror: 649: clearBME3CardIFEerror: =============== 650: bME3CardFWerror: 651: clearBME3CardFWerror: =============== 652: bME3CardPROVerror: 653: clearBME3CardPROVerror: =============== 654: bME3CrashDetect: 655: clearBME3CrashDetect: =============== 656: powerFromBattery: 657: clearPowerFromBattery: =============== 658: invalidBatteryStatus: 659: clearInvalidBatteryStatus: =============== 660: batteryChargeLow: 661: clearBatteryChargeLow: =============== 662: batteryNotPresent: 663: clearBatteryNotPresent: =============== 664: voltageLow: 665: clearVoltageLow: =============== 666: tempOverThreshold: 667: clearTempOverThreshold: =============== 668: tempUnderThreshold: 669: clearTempUnderThreshold: =============== 670: cpuOverThreshold: 671: clearCpuOverThreshold: =============== 672: trafficOverload: 673: clearTrafficOverload: =============== 674: gEPONModuleNotDetect: 675: clearGEPONModuleNotDetect: =============== 676: gEPONPortOperationDown: 677: clearGEPONPortOperationDown: =============== 678: gEPONNoIncomingTraffic: 679: clearGEPONNoIncomingTraffic: =============== 680: processCrashDetect: 681: clearProcessCrashDetect: =============== 682: memoryLeakDetect: 683: clearMemoryLeakDetect: =============== 684: memoryCorrupDetect: 685: clearMemoryCorrupDetect: =============== 686: memoryLowDetect: 687: clearMemoryLowDetect: =============== 688: dataLineerror: 689: clearDataLineerror: =============== 690: addressLineerror: 691: clearAddressLineerror: =============== 692: chipsetNotDetcet: 693: clearChipsetNotDetcet: =============== 694: pciBuserror: 695: clearPciBuserror: =============== 696: securityAdminConnect: 697: clearSecurityAdminConnect: =============== 698: oNUPowerDown: 699: clearONUPowerDown: =============== 700: oNUNotRegister: 701: clearONUNotRegister: =============== 702: oNTOpticPre: 703: clearONTOpticPre: =============== 800: switchoverInitiated: =============== 801: switchoverDone: =============== 803: redConfigurationMisMatch: To detect whether redundancy configuration is mismatched. =============== 901: gponNoAuthCBU: To detect no auth CBU is detected. 902: gponDuplicateONU: To detect ONU is duplicated. 903: gponDyingGasp: To detect dying GASP is detected. 904: gponUpgradeComplete: To detect upgrade complete is detected. 905: gponDeregistered: To detect whether deregistered is detected or not. 906: gponRegistered: 907: gponRogueOnu: To detect rogue ONU is detected 908: gponOnuBatteryEvent: To detect whether ONU battery event is detected or not. 909: clearGponOnuBetteryEvent: 910: gponOnuPortOperStatus: To detectONU port operation statue is chagned. 911: gponTransceiverChanged: To detect transceiver is changed. 912: gponOltLosOn: To detect whether OLT LOS is on or off 913: gponOltLosOff: 914: gponOltLosiOn: To detect whether OLT LOSI is on or off 915: gponOltLosiOff: 916: gponDyingGaspOn: To detect whether dying GASP is on or off 917: gponDyingGaspOff: 918: gponOntOSUpgradeStatus: To detect ONT OS upgrade status is changed. 919: gponOntBLUpgradeStatus: To detect BL upgrade status is changed. 920: gponOltRxPowerLoss: To detect OLT RX power is loss. 921: gponOltRxPowerDetected: To detect OLT RX power status is changed. 922: gponOnuTemperatureHighOverThreshold: To detect whether ONU temperature exceeds high threshold or not. 923: gponOnuTemperatureHighFallThreshold: 924: gponOnuTemperatureLowOverThreshold: To detect whether ONU temperature belows low threshold or not. 925: gponOnuTemperatureLowFallThreshold: 926: gponOnuCpuOverThreshold: To detect whether ONU CPU exceeds threshold or not. 927: gponOnuCpuFallThreshold: 928: gponOnuMemoryOverThreshold: To detect whether memory exceeds threshold or not. 929: gponOnuMemoryFallThreshold: 930: gponOnuI2cFail: To detect ONU L2C fail is detected. 931: gponOnuRxOpticLowThreshAlarmOn: To detect whether ONU RX optic belows low threshold or not. 932: gponOnuRxOpticLowThreshAlarmOff: 933: gponOnuRxOpticHighThreshAlarmOn: To detect whether ONU RX optic exceeds high threshold or not. 934: gponOnuRxOpticHighThreshAlarmOff: 935: gponOltLOFIOn: To detect whether OLT LOFL is on or off 936: gponOltLOFIOff: 937: gponOltDOWOn: To detect whether OLT DOW is on or off 938: gponOltDOWOff: 939: gponOltSFOn: To detect whether OLT SF is on or off 940: gponOltSFOff: 941: gponOltSDOn: To detect whether OLT SD is on or off 942: gponOltSDOff: 943: gponOltLCDGIOn: To detect whether OLT LCDGL is on or off 944: gponOltLCDGIOff: 945: gponOltRDOn: To detect whether OLT RD is on or off 946: gponOltRDOff: 947: gponOltSUFOn: To detect whether OLT SUF is on or off 948: gponOltSUFOff: 949: gponOltLOAOn: To detect whether OLT LOA is on or off 950: gponOltLOAOff: 951: gponOltLOAMIOn: To detect whether OLT LOAML is on or off 952: gponOltLOAMIOff: 953: gponOltMEMOn: To detect whether OLT MEM is on or off 954: gponOltMEMOff: 955: gponOltPEEOn: To detect whether OLT PEE is on or off 956: gponOltPEEOff: 957: gponOltPSTOn: To detect whether OLT PST is on or off 958: gponOltPSTOff: 959: gponOltERROn: To detect whether OLT ERR is on or off 960: gponOltERROff: 961: gponOltREIOn: To detect whether OLT REI is on or off 962: gponOltREIOff: 963: gponAntiSpoofingDupPortOn: To detect whether anti spoofing port is duplicated or not. 964: gponAntiSpoofingDupPortOff: 965: gponRedundancySwitchOver: To detect redundancy switchover is changed. 966: gponDuplicatedRangingResponse: To detect ranging response is changed. 967: gponOnuPortOpticModuleRemove: To detect whether ONU port optic module is removed or installed. 968: gponOnuPortOpticModuleInstall: 969: gponOnuOMCCProblemDetected: To detect whether ONU OMCC problem is detected or not. 970: gponOnuOMCCProblemCleared: 971: gponOltFixedTcontAlarmOn: To detect whether OLT fixed Tcont alarm is on or off. 972: gponOltFixedTcontAlarmOff: 973: gponOltDynamicTcontAlarmOn: To detect whether OLT dynamic Tcont alarm is on or off. 974: gponOltDynamicTcontAlarmOff: 975: gponOltPortCountAlarmOn: To detect whether OLT port count alarm is on or off. 976: gponOltPortCountAlarmOff: 977: gponOltCableDownAlarmOn: To detect whether OLT cable down alarm is on or off. 978: gponOltCableDownAlarmOff: 979: gponOltDeactiveMonitorAlarmOn: To detect whether deactive monitor alarm is on or off. 980: gponOltDeactiveMonitorAlarmOff: 981: gponOltDfiOn: To detect whether OLT DFI is on or off. 982: gponOltDfiOff: 984: gponOltTransceiverPortChanged: To detect OLT transeiver port is changed. 985: gponOnuPortOperStatusDown: To detect whether ONU port operation status is down or up. 986: gponOnuPortOperStatusUp:: =============== 1101: emLogDefectCPUHighOver: To detect whether EM log detect CPU exceeds threshold or not. 1102: emLogDefectCPUHighUnder: 1103: emLogTemperHighOver: To detect whether EM log temperature exceeds high threshold or not. 1104: emLogTemperHighUnder: 1105: emLogTemperLowUnder: To detect whether EM log CPU belows low threshold or not. 1106: emLogTemperLowOver: 1107: emLogMemLowUnder: To detect whether EM log memory belows low threshold or not. 1108: emLogMemLowOver: 1109: emLogFanFail: To detect whether EM log fan status is failed or not. 1110: emLogFanFailCleared: 1111: emLogPhyCRCFail: To detect whether EM log physical CRC is failed or not. 1112: emLogPhyCRCFailCleared: 1113: emLogPhyDetectFail: To detect whether EM log physical status is failed or not. 1114: emLogPhyDetectFailCleared: 1115: emLogSFUMateInitFail: To detect whether EM log SFU mate initialization is failed or not. 1116: emLogSFUMateInitFailCleared: 1117: emLogDaemonHealthBad: To detect whether EM log daemon health is bad or not. 1118: emLogDaemonHealthBadCleared: 1119: emLogGPIURavenLinkDown: To detect whether EM log GPIU RAVEN link is down or not. 1120: emLogGPIURavenLinkDownCleared: =============== 1151: slotNosUpgradeStart: To detect whether slot NOS upgrade is started or ended. 1152: slotNosUpgradeEnd: =============== 1331: gponOnuAniVoltageLowThreshAlarmOn: To detect whether ONU ANI voltage belows low threshold or not. 1332: gponOnuAniVoltageLowThreshAlarmOff: 1333: gponOnuAniVoltageHighThreshAlarmOn: To detect whether ONU ANI voltage exceeds high threshold or not. 1334: gponOnuAniVoltageHighThreshAlarmOff: 1335: gponOnuAniTemperatureLowThreshAlarmOn: To detect whether ONU ANI temperature belows low threshold or not. 1336: gponOnuAniTemperatureLowThreshAlarmOff: 1337: gponOnuAniTemperatureHighThreshAlarmOn: To detect whether ONU ANI temperature exceeds high threshold or not. 1338: gponOnuAniTemperatureHighThreshAlarmOff: 1339: gponOnuAniTxBiasLowThreshAlarmOn: To detect whether ONU ANI TX bias belows low threshold or not. 1340: gponOnuAniTxBiasLowThreshAlarmOff: 1341: gponOnuAniTxBiasHighThreshAlarmOn: To detect whether ONU ANI TX bias exceeds high threshold or not. 1342: gponOnuAniTxBiasHighThreshAlarmOff: 1343: gponOnuAniTxpowerLowThreshAlarmOn: To detect whether ONU ANI TX power belows low threshold or not. 1344: gponOnuAniTxpowerLowThreshAlarmOff: 1345: gponOnuAniTxpowerHighThreshAlarmOn: To detect whether ONU ANI TX power exceeds high threshold or not. 1346: gponOnuAniTxpowerHighThreshAlarmOff: |
| INT sleAlarmSeverityControlValue | 1.3.6.1.4.1.6296.101.4.2.2.7 | INTEGER | read-write | The severity of alarm. |
| sleAlarmSeverityNotification | 1.3.6.1.4.1.6296.101.4.2.3 | |||
| NTF sleAlarmSeveriityCreated | 1.3.6.1.4.1.6296.101.4.2.3.1 | Description. | ||
| NTF sleAlarmSeveriityDestroyed | 1.3.6.1.4.1.6296.101.4.2.3.2 | Description. | ||
| NTF sleAlarmSeverityChanged | 1.3.6.1.4.1.6296.101.4.2.3.3 | Description. | ||
| sleAlarmReport | 1.3.6.1.4.1.6296.101.4.3 | |||
| sleAlarmReportTable | 1.3.6.1.4.1.6296.101.4.3.1 | not-accessible | The alarm list table is used to store all reported alarms. | |
| sleAlarmReportEntry | 1.3.6.1.4.1.6296.101.4.3.1.1 | not-accessible | Entry of the alarm lis table. | |
| SPE sleAlarmSpecificCode | 1.3.6.1.4.1.6296.101.4.3.1.1.1 | SpecificNum | read-only | The OID of alarm. The following alarms is devided by the specific character, ===============. The division basis is that alarms is bounded or released. 001: portDown: To detect whether physical or logical interface's link status is up or down. 002: portUp: =============== 003: portRemoved: To detect whether physical interface is installed or not. 004: portInstalled: =============== 005: powerFail: To detect whether power module's operation status is good or not. (Without doubt, more than 1 power module should be equipped.) 006: powerOK: =============== 007: powerRemoved: To detect whether power module is installed or not, through the PLD access. (Without doubt, more than 1 power module should be equipped.) 008: powerInstalled: =============== 009: fanFail: To detect whether FAN module's operation status is good or not. 010: fanOK: =============== 011: fanRemoved: To detect whether FAN module is installed or not, through the PLD access. 012: fanInstalled: =============== 013: moduleRemoved: To detect whether physical interface module is installed or not, through the S/W I2C 014: moduleInstalled: =============== 015: systemRestart: Network system is restarted by operator. This is not H/W start but S/W start. =============== 016: systemStart: Network system is restarted by operator or system status. This is not S/W start but H/W start. (This alarm isnt used current) =============== 017: broadcastOver: To detect the receipt of broadcast packet. (This alarm isnt used current) 018: broadcastUnder: =============== 019: cpuOverLoad: To detect whether the configured CPU load threshold is less than current CPU load usage or not. 020: cpuUnderLoad: =============== 021: memoryOverUsed: To detect whether the configured memory threshold is less than current memory usage or not. 022: memoryUnderUsed: =============== 023: portOverThreshold: To detect whether the configured physical or logical interface threshold is less than delta value of current interface's InOctects or not. 024: portUnderThreshold: =============== 025: temperatureHigh: To detect whether the configured system's temperature threshold is less than current temperature or not. 026: temperatureLow: =============== 027: mfgdBlocked: To detect whether the specific MAC by MAC flood guard is blocked or not. 028: mfgdReleased: =============== 029: ipConflict: To detect whether the same IP address on different network node is configured or not. 030: ipUnconflict: =============== 031: dhcpLeaseShortage: To detect whether IP address that can be assigned to subscriber by DHCP server is sufficient or not. 032: dhcpLeaseSufficient: =============== 033: dhcpOccuredIllegalEntry: To detect whether a subsceiber is using a static IP address or not. 034: dhcpRemovedIllegalEntry: =============== 035: rmonAlarmRising: To detect whether rising threshold of a specific MO in RMON alarm sampling is less than current calculated value by alarm sample type or not. But alarm generation would be issued by means of event type in RMON event. 036: rmonAlarmNoRising: =============== 037: rmonAlarmFalling: To detect whether falling threshold of a specific MO in RMON alarm sampling is less than current calculated value by alarm sample type or not. But alarm generation would be issued by means of event type in RMON event. 038: rmonAlarmNoFalling: =============== 039: bpduGuardDisabled: To detect whether edge ports is guarded about superior BPDU or not. In case of insertion edge node with 0 or lower priority than priority of current root bridge node, it will be disarrangement during a short time because of recognition a new inserted node as root bridge. So these edge ports is guarded, and then edge ports is blocked about all superior BPDU. So STP reconfiguration doesn't use this edge ports. =============== 040: rootGuardDisabled: To detect whether edge ports is guarded about superior BPDU or not. In case of insertion edge node with 0 or lower priority than priority of current root bridge node, it will be disarrangement during a short time because of recognition a new inserted node as root bridge. So, Root guard prevents a new inserted node from being root bridge as well as receiving a superior BPDU from root bridge. but this node participates in STP topology reconfiguration. If root bridge does not send a superior BPDU, then this node acts usually though STP state change. =============== 041: portSecurity: To detect whether interface is configured for security or not. This can be used to prevent MAC from flooding as well as spoofing. That is, As a result, this will obstruct an attack as like DoS attack. =============== 042: userLogin: 043: userLogout: =============== 051: igmpGroupJoined: To detect whether a subscriber is joined a multicast group or not. 052: igmpGroupLeaved: =============== 053: dhcpIpaddressBound: To detect wether a dynamic IP address is assigned to a subscriber or not. 054: dhcpIpaddressFree: =============== 055: doorOpened: To detect whether outer door is opeded or not, as external alarm. 056: doorClosed: =============== 057: powerModeChangedPowerToBattery: To detect whether a system is using AC power or battery. A system is using AC power usually. If there is any power problems as like a power failure, a system is using battery instead of AC power. 058: powerModeChangedBatteryToPower: =============== 059: batterylowcapacity: To detect whether current battery capacity is less capacity threshold according to battery usage or not. The capacity of AC power is 16 voltage and battery is 20. Capacity threshold is configured by H/W specification. So operator can't change it. 060: batterynormalcapacity: =============== 061: batteryhighTemperature: To detect whether current temperature of battery is greater than temperature threshold or not. 062: batterynormalTemperature: =============== 063: authenticationFail: To detect whether the connected user is authentic or non-authentic. 064: authenticationNofail: =============== 065: psuAcHighTemperature: To detect whether current temperature of Power Supply Unit is greater than temperature threshold or not. 066: psuAcNormalTemperature: =============== 067: batteryRemoved: To detect whether battery is equipped at network system or not. Battery is used as redundancy power service. So operator can decide the installation of battery. 068: batteryEquipped: =============== 069: batteryLowVoltage: To detect whether battery voltage is less than 12.5 volt or not. 12.5 volt value is configured by H/W specification. So operator can't change it. 070: batteryNormalVoltage: =============== 071: adminAccessLogin: To detect whether a operator connects at this network system or not. 072: adminAccessLogout: =============== 073: cfgdBlocked: To detect whether it is blocked flood to CPU or not. 074: cfgdReleased: =============== 075: sfgdBlocked: To detect whether it is blocked flood to system or not. 076: sfgdReleased: =============== 077: swWatchdogAbnormalState: To detect whether a specific process acts normally or not. 078: swWatchdogNormalState: =============== 079: swWatchdogDetectError: To detect whether a specific process is detected a error related to itself or cleared. 080: swWatchdogClearError: =============== 081: ppsControlBlocked: To detect whether it is blocked by pps-control or not. 082: ppsControlReleased: =============== 083: gotDMITempHighOverAlarm: To detect whether internal temperature exceeds high alarm level or not. 084: gotDMITempHighFallAlarm: =============== 085: gotDMITempLowOverAlarm: To detect whether internal temperature is below low alarm level or not. 086: gotDMITempLowFallAlarm: =============== 087: gotDMITempHighOverWarning: To detect whether internal temperature exceeds high warning level or not. 088: gotDMITempHighFallWarning: =============== 089: gotDMITempLowOverWarning: To detect whether internal temperature is below low warning level or not. 090: gotDMITempLowFallWarning: =============== 091: gotDMIVolHighOverAlarm: To detect whether internal supply voltage exceeds high alarm level or not. 092: gotDMIVolHighFallAlarm: =============== 093: gotDMIVolLowOverAlarm: To detect whether internal supply voltage is below low alarm level or not. 094: gotDMIVolLowFallAlarm: =============== 095: gotDMIVolHighOverWarning: To detect whether internal supply voltage exceeds high warning level or not. 096: gotDMIVolHighFallWarning: =============== 097: gotDMIVolLowOverWarning: To detect whether internal supply voltage is below low warning level or not. 098: gotDMIVolLowFallWarning: =============== 099: gotDMITxBiasHighOverAlarm: To detect whether TX Bias current exceeds high alarm level or not. 100: gotDMITxBiasHighFallAlarm: =============== 101: gotDMITxBiasLowOverAlarm: To detect whether TX Bias current is below low alarm level or not. 102: gotDMITxBiasLowFallAlarm: =============== 103: gotDMITxBiasHighOverWarning: To detect whether TX Bias current exceeds high warning level or not. 104: gotDMITxBiasHighFallWarning: =============== 105: gotDMITxBiasLowOverWarning: To detect whether TX Bias current is below low warning level or not. 106: gotDMITxBiasLowFallWarning: =============== 107: gotDMITxPowerHighOverAlarm: To detect whether TX output power exceeds high alarm level or not. 108: gotDMITxPowerHighFallAlarm: =============== 109: gotDMITxPowerLowOverAlarm: To detect whether TX output power is below low alarm level or not. 110: gotDMITxPowerLowFallAlarm: =============== 111: gotDMITxPowerHighOverWarning: To detect whether TX output power exceeds high warning level or not. 112: gotDMITxPowerHighFallWarning: =============== 113: gotDMITxPowerLowOverWarning: To detect whether TX output power is below low warning level or not. 114: gotDMITxPowerLowFallWarning: =============== 115: gotDMIRxPowerHighOverAlarm: To detect whether RX output power exceeds high alarm level or not. 116: gotDMIRxPowerHighFallAlarm: =============== 117: gotDMIRxPowerLowOverAlarm: To detect whether RX output power is below low alarm level or not. 118: gotDMIRxPowerLowFallAlarm: =============== 119: gotDMIRxPowerHighOverWarning: To detect whether RX output power exceeds high warning level or not. 120: gotDMIRxPowerHighFallWarning: =============== 121: gotDMIRxPowerLowOverWarning: To detect whether RX output power is below low warning level or not. 122: gotDMIRxPowerLowFallWarning: =============== 123: nosRemoteUpgradeRequest: 124: nosRemoteUpgradeSuccess: 125: nosRemoteUpgradeFailAbort: 126: nosRemoteUpgradeFailHeaderError: 127: nosRemoteUpgradeFailDownloadError: 128: nosRemoteUpgradeFailFlashError: 129: nosRemoteUpgradeStart: =============== 130: systemDyingGasp: =============== 133: cliHistory: To detect whether CLI history is detected or not. 134: cliHistoryNo: =============== 135: ntpConnectionFail: To detect whether NTP connection is failed or not. 136: ntpConnectionFailNo: =============== 137: nmsConnectionTypeChanged: To detect whether NMS connection type is changed. =============== 159: clockModuleRemoved: To detect whether clock module is removed or installed. 160: clockModuleInstalled: 161: clockModuleInitFail: To detect whether clock module initiolization is failed or not. 162: clockModuleInitOk: =============== 163: cliHistoryLog: To detect whether CLI history log is over or not. 164: cliHistoryLogNo: =============== 165: slotActionEvent: To detect whether slot action is changed. 166: slotStateChange: To detect whether slot state is changed. =============== 167: interfaceAdminDown: To detect whether physical or logical interface's admin link status is up or down. 168: interfaceAdminUp: =============== 169: slotPowerMonAbnormal: To detect whether slot power monitor abnormal or normal is detected. 170: slotPowerMonNormal: =============== 171: slotErrorLEDChanged: To detect whether error LED is changed. =============== 185: cpuPpsOverThreshold: To detect whether PPS is over threshold or not. 186: cpuPpsUnderThreshold: =============== 199: slotHealthStatusTimeout: To detect whether slot health status is time out or not. 200: slotHealthStatusTimeoutCleared: =============== 201: advaTemperature: To detect whether current chassis temperature is less than chassis temperature threshold or not. 202: advaTemperatureNo: =============== 203: advaPSUFailure: To detect whether ADVA system's power supply unit has a failure or not. 204: advaPSUFailureNo: =============== 205: advaFanFailure: To detect whether ADVA system's FAN has a failure or not. 206: advaFanFailureNo: =============== 207: advaInterfaceReceiveFailure: To detect whether ADVA system's receipt has a failure or not. 208: advaInterfaceReceiveFailureNo: =============== 209: advaInterfaceOpticalThreshold: To detect whether Adva system's optical receive power level is less than optical threshold or not. 210: advaInterfaceOpticalThresholdNo: =============== 211: advaInterfaceTransmitFault: To detect whether ADVA system's transmission has a failure or not. 212: advaInterfaceTransmitFaultNo: =============== 213: dvaInterfaceMisconfiguration: To detect whether ADVA system's interface is configured rightly or not. 214: advaInterfaceMisconfigurationNo: =============== 215: advaInterfaceSFPMismatch: To detect whether ADVA system's SFP interface is mismatched or not. 216: advaInterfaceSFPMismatchNo: =============== 217: advaVoltageLow: To detect whether ADVA system's current voltage is less than voltage threshold or not. 218: advaVoltageLowNo: =============== 219: advaVoltageHigh: To detect whether ADVA system's current voltage is greater than voltage threshold or not. 220: advaVoltageHighNo: =============== 301: erpDomainLotp: To detect whether LOTP(Loss of Test Packet) exists a domain of ERP or not. The Loss of Test Packet defect is defined when a node does not receive any test packet at any of its ports for a period of 3 times. 302: erpDomainLotpNo: =============== 303: erpDomainULotp: To detect whether undirectional LOTP(Loss of Test Packet) exists a domain of ERP or not. The Loss of Test Packet defect is defined when a RM node of one domain does not receive any test packet at one port for a period of 3 times. 304: erpDomainULotpNo: =============== 305: erpDomainMultipleRM: To detect whether Multiple RM node is supported or not. The defect is raised when a RM node receives its own test packets with an Ack destination address field with a non-zero value. 306: erpDomainMultipleRMNo: =============== 307: erpDomainRMNodeReacheablity: To detect whether RM reachability is raised or not. The detection of multiple failures indicates that the ring is segmented and that the RM Node is unreacheable. This is only possible at normal ring nodes isolated from the RM node. 308: erpDomainRMNodeReacheablityNo: =============== 391: startupConfigLoadEnded: To detect whether startup configuration load is ended. =============== 401: eponOnuDeregister: To detect whether ONU is registered into OLT or not. That is, ONU that its operation is service on should be sent registration information to OLT. 402: eponOnuRegister: =============== 403: eponOnuRegistrationError: To detect whether ONU is failed registeration process into OLT. 404: eponOnuNoRegistrationError: =============== 405: eponBadEncryptionKey: To detect wwhether the encryption key is valid or not. A message between ONU and OLT is encrypted using random encryption key. There is that the encryption key is invalid as transmission failure from time to time. 406: eponNoBadEncryptionKey: =============== 407: eponLlidMistmatch: To detect whether Llid of message between ONU and OLT is valid or not. On registering, ONU informs unique ID to OLT. And then, all communication between ONU and OLT must use the unique ID. The unique ID is called Llid. 408: eponNoLlidMismatch: =============== 409: eponTooManyRegister: To detect whether the registered ONU per 1 OLT is greater than 32 or not. That is, ONU can be registered from 1 to the maximum 32 at 1 OLT. 410: eponNoTooManyRegister: =============== 411: eponDyingGASP: To detect whether a ONU is down from dying gasp or not. A ONU could be changed to down state as a number of reasons. By the way, ONU that is changed to down as dying gasp would be sent dying gasp signal to OLT and then ONU's link would be changed to down. 412: eponNoDyingGASP: =============== 413: eponOnuErrFramePeriod: 414: eponOnuNoErrFramePeriod: =============== 415: eponOnuErrFrame: 416: eponOnuNoErrFrame: =============== 417: eponOnuErrFrameSecondSummary: 418: eponOnuNoErrFrameSecondSummary: =============== 419: eponOnuLastOnuDeregister: To detect whether a deregistered ONU is last ONU or not. If a deregistered ONU is last ONU, the OLT would be changed to serviceable status. 420: eponOnuNoLastOnuDeregister: =============== 421: eponOltCableDown: 422: eponOltRecoverCableDown: =============== 501: autoCLIStart: To detect whether the scheduled auto CLI is started or not. 502: autoCLINoStart: =============== 503: autoCLIComplete: To detect whether the scheduled auto CLI is completed or not. 504: autoCLINoComplete: =============== 505: autoCLIRemoveOutputFile: To detect whether the result file of the scheduled auto CLI is removed or not. The reason that the result file is removed is that the configured file size for the result is less than the stored result file size. If so, the oldest file would be removed before everything. 506: autoCLINoRemoveOutputFile: =============== 507: autoResetSystem: To detect whether the system is restarted or not. The conditions that system is restarted is that ping loss threshold is less than current ping loss count during the configured interval and that current free memory size is less than configured free memory size. 508: autoResetNoSystem: =============== 509: autoResetPingReplyLoss: To detect whether ping reply from the designated network node is received or not. Operator designates any gateway system that can communicate to detect current network environment. System sends ICMP packet to the designated gateway system periodically. If the system doesn't receive ping reply packet within any interval, operator recognizes that the system can't communicate any more because of some problems of the system. 510: autoResetNoPingReplyLoss: =============== 511: autoResetMemoryLeakDetect: To detect whether current free memory size is less than the configured free memory size or not. Periodically, free memory size is checked to confirm system availability. 512: autoResetNoMemoryLeakDetect: =============== 601: arulePacketDropDetect: To detect whether it is dropped some packet by arule or not. 602: arulePacketDropRelease: =============== 620: bME1CardNoDetect: 621: clearBME1CardNoDetect: =============== 622: bME1CardAFEerror: 623: clearBME1CardAFEerror: =============== 624: bME1CardIFEerror: 625: clearBME1CardIFEerror: =============== 626: bME1CardFWerror: 627: clearBME1CardFWerror: =============== 628: bME1CardPROVerror: 629: clearBME1CardPROVerror: =============== 630: bME1CrashDetect: 631: clearBME1CrashDetect: =============== 632: bME2CardNoDetect: 633: clearBME2CardNoDetect: =============== 634: bME2CardAFEerror: 635: clearBME2CardAFEerror: =============== 636: bME2CardIFEerror: 637: clearBME2CardIFEerror: =============== 638: bME2CardFWerror: 639: clearBME2CardFWerror: =============== 640: bME2CardPROVerror: 641: clearBME2CardPROVerror: =============== 642: bME2CrashDetect: 643: clearBME2CrashDetect: =============== 644: bME3CardNoDetect: 645: clearBME3CardNoDetect: =============== 646: bME3CardAFEerror: 647: clearBME3CardAFEerror: =============== 648: bME3CardIFEerror: 649: clearBME3CardIFEerror: =============== 650: bME3CardFWerror: 651: clearBME3CardFWerror: =============== 652: bME3CardPROVerror: 653: clearBME3CardPROVerror: =============== 654: bME3CrashDetect: 655: clearBME3CrashDetect: =============== 656: powerFromBattery: 657: clearPowerFromBattery: =============== 658: invalidBatteryStatus: 659: clearInvalidBatteryStatus: =============== 660: batteryChargeLow: 661: clearBatteryChargeLow: =============== 662: batteryNotPresent: 663: clearBatteryNotPresent: =============== 664: voltageLow: 665: clearVoltageLow: =============== 666: tempOverThreshold: 667: clearTempOverThreshold: =============== 668: tempUnderThreshold: 669: clearTempUnderThreshold: =============== 670: cpuOverThreshold: 671: clearCpuOverThreshold: =============== 672: trafficOverload: 673: clearTrafficOverload: =============== 674: gEPONModuleNotDetect: 675: clearGEPONModuleNotDetect: =============== 676: gEPONPortOperationDown: 677: clearGEPONPortOperationDown: =============== 678: gEPONNoIncomingTraffic: 679: clearGEPONNoIncomingTraffic: =============== 680: processCrashDetect: 681: clearProcessCrashDetect: =============== 682: memoryLeakDetect: 683: clearMemoryLeakDetect: =============== 684: memoryCorrupDetect: 685: clearMemoryCorrupDetect: =============== 686: memoryLowDetect: 687: clearMemoryLowDetect: =============== 688: dataLineerror: 689: clearDataLineerror: =============== 690: addressLineerror: 691: clearAddressLineerror: =============== 692: chipsetNotDetcet: 693: clearChipsetNotDetcet: =============== 694: pciBuserror: 695: clearPciBuserror: =============== 696: securityAdminConnect: 697: clearSecurityAdminConnect: =============== 698: oNUPowerDown: 699: clearONUPowerDown: =============== 700: oNUNotRegister: 701: clearONUNotRegister: =============== 702: oNTOpticPre: 703: clearONTOpticPre: =============== 800: switchoverInitiated: =============== 801: switchoverDone: =============== 803: redConfigurationMisMatch: To detect whether redundancy configuration is mismatched. =============== 901: gponNoAuthCBU: To detect no auth CBU is detected. 902: gponDuplicateONU: To detect ONU is duplicated. 903: gponDyingGasp: To detect dying GASP is detected. 904: gponUpgradeComplete: To detect upgrade complete is detected. 905: gponDeregistered: To detect whether deregistered is detected or not. 906: gponRegistered: 907: gponRogueOnu: To detect rogue ONU is detected 908: gponOnuBatteryEvent: To detect whether ONU battery event is detected or not. 909: clearGponOnuBetteryEvent: 910: gponOnuPortOperStatus: To detectONU port operation statue is chagned. 911: gponTransceiverChanged: To detect transceiver is changed. 912: gponOltLosOn: To detect whether OLT LOS is on or off 913: gponOltLosOff: 914: gponOltLosiOn: To detect whether OLT LOSI is on or off 915: gponOltLosiOff: 916: gponDyingGaspOn: To detect whether dying GASP is on or off 917: gponDyingGaspOff: 918: gponOntOSUpgradeStatus: To detect ONT OS upgrade status is changed. 919: gponOntBLUpgradeStatus: To detect BL upgrade status is changed. 920: gponOltRxPowerLoss: To detect OLT RX power is loss. 921: gponOltRxPowerDetected: To detect OLT RX power status is changed. 922: gponOnuTemperatureHighOverThreshold: To detect whether ONU temperature exceeds high threshold or not. 923: gponOnuTemperatureHighFallThreshold: 924: gponOnuTemperatureLowOverThreshold: To detect whether ONU temperature belows low threshold or not. 925: gponOnuTemperatureLowFallThreshold: 926: gponOnuCpuOverThreshold: To detect whether ONU CPU exceeds threshold or not. 927: gponOnuCpuFallThreshold: 928: gponOnuMemoryOverThreshold: To detect whether memory exceeds threshold or not. 929: gponOnuMemoryFallThreshold: 930: gponOnuI2cFail: To detect ONU L2C fail is detected. 931: gponOnuRxOpticLowThreshAlarmOn: To detect whether ONU RX optic belows low threshold or not. 932: gponOnuRxOpticLowThreshAlarmOff: 933: gponOnuRxOpticHighThreshAlarmOn: To detect whether ONU RX optic exceeds high threshold or not. 934: gponOnuRxOpticHighThreshAlarmOff: 935: gponOltLOFIOn: To detect whether OLT LOFL is on or off 936: gponOltLOFIOff: 937: gponOltDOWOn: To detect whether OLT DOW is on or off 938: gponOltDOWOff: 939: gponOltSFOn: To detect whether OLT SF is on or off 940: gponOltSFOff: 941: gponOltSDOn: To detect whether OLT SD is on or off 942: gponOltSDOff: 943: gponOltLCDGIOn: To detect whether OLT LCDGL is on or off 944: gponOltLCDGIOff: 945: gponOltRDOn: To detect whether OLT RD is on or off 946: gponOltRDOff: 947: gponOltSUFOn: To detect whether OLT SUF is on or off 948: gponOltSUFOff: 949: gponOltLOAOn: To detect whether OLT LOA is on or off 950: gponOltLOAOff: 951: gponOltLOAMIOn: To detect whether OLT LOAML is on or off 952: gponOltLOAMIOff: 953: gponOltMEMOn: To detect whether OLT MEM is on or off 954: gponOltMEMOff: 955: gponOltPEEOn: To detect whether OLT PEE is on or off 956: gponOltPEEOff: 957: gponOltPSTOn: To detect whether OLT PST is on or off 958: gponOltPSTOff: 959: gponOltERROn: To detect whether OLT ERR is on or off 960: gponOltERROff: 961: gponOltREIOn: To detect whether OLT REI is on or off 962: gponOltREIOff: 963: gponAntiSpoofingDupPortOn: To detect whether anti spoofing port is duplicated or not. 964: gponAntiSpoofingDupPortOff: 965: gponRedundancySwitchOver: To detect redundancy switchover is changed. 966: gponDuplicatedRangingResponse: To detect ranging response is changed. 967: gponOnuPortOpticModuleRemove: To detect whether ONU port optic module is removed or installed. 968: gponOnuPortOpticModuleInstall: 969: gponOnuOMCCProblemDetected: To detect whether ONU OMCC problem is detected or not. 970: gponOnuOMCCProblemCleared: 971: gponOltFixedTcontAlarmOn: To detect whether OLT fixed Tcont alarm is on or off. 972: gponOltFixedTcontAlarmOff: 973: gponOltDynamicTcontAlarmOn: To detect whether OLT dynamic Tcont alarm is on or off. 974: gponOltDynamicTcontAlarmOff: 975: gponOltPortCountAlarmOn: To detect whether OLT port count alarm is on or off. 976: gponOltPortCountAlarmOff: 977: gponOltCableDownAlarmOn: To detect whether OLT cable down alarm is on or off. 978: gponOltCableDownAlarmOff: 979: gponOltDeactiveMonitorAlarmOn: To detect whether deactive monitor alarm is on or off. 980: gponOltDeactiveMonitorAlarmOff: 981: gponOltDfiOn: To detect whether OLT DFI is on or off. 982: gponOltDfiOff: 984: gponOltTransceiverPortChanged: To detect OLT transeiver port is changed. 985: gponOnuPortOperStatusDown: To detect whether ONU port operation status is down or up. 986: gponOnuPortOperStatusUp:: =============== 1101: emLogDefectCPUHighOver: To detect whether EM log detect CPU exceeds threshold or not. 1102: emLogDefectCPUHighUnder: 1103: emLogTemperHighOver: To detect whether EM log temperature exceeds high threshold or not. 1104: emLogTemperHighUnder: 1105: emLogTemperLowUnder: To detect whether EM log CPU belows low threshold or not. 1106: emLogTemperLowOver: 1107: emLogMemLowUnder: To detect whether EM log memory belows low threshold or not. 1108: emLogMemLowOver: 1109: emLogFanFail: To detect whether EM log fan status is failed or not. 1110: emLogFanFailCleared: 1111: emLogPhyCRCFail: To detect whether EM log physical CRC is failed or not. 1112: emLogPhyCRCFailCleared: 1113: emLogPhyDetectFail: To detect whether EM log physical status is failed or not. 1114: emLogPhyDetectFailCleared: 1115: emLogSFUMateInitFail: To detect whether EM log SFU mate initialization is failed or not. 1116: emLogSFUMateInitFailCleared: 1117: emLogDaemonHealthBad: To detect whether EM log daemon health is bad or not. 1118: emLogDaemonHealthBadCleared: 1119: emLogGPIURavenLinkDown: To detect whether EM log GPIU RAVEN link is down or not. 1120: emLogGPIURavenLinkDownCleared: =============== 1151: slotNosUpgradeStart: To detect whether slot NOS upgrade is started or ended. 1152: slotNosUpgradeEnd: =============== 1331: gponOnuAniVoltageLowThreshAlarmOn: To detect whether ONU ANI voltage belows low threshold or not. 1332: gponOnuAniVoltageLowThreshAlarmOff: 1333: gponOnuAniVoltageHighThreshAlarmOn: To detect whether ONU ANI voltage exceeds high threshold or not. 1334: gponOnuAniVoltageHighThreshAlarmOff: 1335: gponOnuAniTemperatureLowThreshAlarmOn: To detect whether ONU ANI temperature belows low threshold or not. 1336: gponOnuAniTemperatureLowThreshAlarmOff: 1337: gponOnuAniTemperatureHighThreshAlarmOn: To detect whether ONU ANI temperature exceeds high threshold or not. 1338: gponOnuAniTemperatureHighThreshAlarmOff: 1339: gponOnuAniTxBiasLowThreshAlarmOn: To detect whether ONU ANI TX bias belows low threshold or not. 1340: gponOnuAniTxBiasLowThreshAlarmOff: 1341: gponOnuAniTxBiasHighThreshAlarmOn: To detect whether ONU ANI TX bias exceeds high threshold or not. 1342: gponOnuAniTxBiasHighThreshAlarmOff: 1343: gponOnuAniTxpowerLowThreshAlarmOn: To detect whether ONU ANI TX power belows low threshold or not. 1344: gponOnuAniTxpowerLowThreshAlarmOff: 1345: gponOnuAniTxpowerHighThreshAlarmOn: To detect whether ONU ANI TX power exceeds high threshold or not. 1346: gponOnuAniTxpowerHighThreshAlarmOff: |
| INT sleAlarmReportingSourceType | 1.3.6.1.4.1.6296.101.4.3.1.1.2 | INTEGER | read-only | The type of Reporting source In case of source type 13 gponSourceTlv, It's shown as below. sleAlarmReportingSourceType.A.B.C.D.E.F A: sleAlarmSpecificCode B: sleAlarmReportingSourceType 13 C: sleAlarmReportingSource's length D: type 1-slot 2-port 3-vlan 4-MAC 5-ONU 6-UNI_type 7-UNI_index 255-etc E: legth F: value |
| OCT sleAlarmReportingSource | 1.3.6.1.4.1.6296.101.4.3.1.1.3 | OCTET STRING | read-only | The alarm severity of alarm. In case of source type 13 gponSourceTlv, It's shown as below. sleAlarmReportingSourceType.A.B.C.D.E.F A: sleAlarmSpecificCode B: sleAlarmReportingSourceType 13 C: sleAlarmReportingSource's length D: type 1-slot 2-port 3-vlan 4-MAC 5-ONU 6-UNI_type 7-UNI_index 255-etc E: legth F: value |
| INT sleAlarmSpecificSeverity | 1.3.6.1.4.1.6296.101.4.3.1.1.4 | INTEGER | read-only | The alarm severity. The value cleared indicates the clearing of alarm. |
| U32 sleAlarmSpecificProblem | 1.3.6.1.4.1.6296.101.4.3.1.1.5 | Unsigned32 | read-only | Describes the spefic problems e.g. when a shePhysCardFailure is sent here the termperature alarm is specified |
| OCT sleAlarmSpecificProblemText | 1.3.6.1.4.1.6296.101.4.3.1.1.6 | OCTET STRING | read-only | Textual description of specific problem reported by alarming. To be discussed: Option is to define an alarm for every problem |
| I32 sleAlarmTimeAndDate | 1.3.6.1.4.1.6296.101.4.3.1.1.7 | Integer32 | read-only | The date and time when the alarm appeared or cleared |
| C32 sleAlarmSpecificSeqNum | 1.3.6.1.4.1.6296.101.4.3.1.1.8 | Counter32 | read-only | Sequence number for the alarm synchronization. This value has a number to be used for the next alarm trap. |
| INT sleAlarmReportPairType | 1.3.6.1.4.1.6296.101.4.3.1.1.9 | INTEGER | read-only | The type is whether alarm trap is pair or mono. |
| sleAlarmReportNotification | 1.3.6.1.4.1.6296.101.4.3.2 | |||
| NTF sleAlarmReportNotified | 1.3.6.1.4.1.6296.101.4.3.2.1 | Description. | ||
| sleAlarmReportControl | 1.3.6.1.4.1.6296.101.4.3.3 | |||
| INT sleAlarmReportControlRequest | 1.3.6.1.4.1.6296.101.4.3.3.1 | INTEGER | read-write | Description. |
| SLE sleAlarmReportControlStatus | 1.3.6.1.4.1.6296.101.4.3.3.2 | SleControlStatusType | read-only | Description. |
| G32 sleAlarmReportControlTimer | 1.3.6.1.4.1.6296.101.4.3.3.3 | Gauge32 | read-write | Description. |
| TIK sleAlarmReportControlTimeStamp | 1.3.6.1.4.1.6296.101.4.3.3.4 | TimeTicks | read-only | Description. |
| SLE sleAlarmReportControlReqResult | 1.3.6.1.4.1.6296.101.4.3.3.5 | SleControlRequestResultType | read-only | Description. |
| SPE sleAlarmReportControlSpecificCode | 1.3.6.1.4.1.6296.101.4.3.3.6 | SpecificNum | read-write | Alarm specific code |
| INT sleAlarmReportControlSourceType | 1.3.6.1.4.1.6296.101.4.3.3.7 | INTEGER | read-write | The type of Reporting source |
| OCT sleAlarmReportControlSource | 1.3.6.1.4.1.6296.101.4.3.3.8 | OCTET STRING | read-write | The index of the failed component which reports the alarm. It is the entPhysicalIndex in case of a card is reporting, or the ifIndex in case of an interface reporting |
| sleAlarmReportNotifications | 1.3.6.1.4.1.6296.101.4.3.4 | |||
| NTF sleAlarmReportCleared | 1.3.6.1.4.1.6296.101.4.3.4.1 | Description. | ||
| NTF sleAlarmReportDeleted | 1.3.6.1.4.1.6296.101.4.3.4.2 | Description. | ||
| sleAlarmHistory | 1.3.6.1.4.1.6296.101.4.4 | |||
| sleAlarmHistoryTable | 1.3.6.1.4.1.6296.101.4.4.1 | not-accessible | The alarm severity table. The alarm severity table associates profile index and AlarmID pairs with severities to be used for alarm traps. (Note that this table does not apply to cleared alarms). | |
| sleAlarmHistoryEntry | 1.3.6.1.4.1.6296.101.4.4.1.1 | not-accessible | Entry of the alarm severity table. | |
| INT sleAlarmHistoryIndex | 1.3.6.1.4.1.6296.101.4.4.1.1.1 | INTEGER | read-only | The OID of alarm. |
| SPE sleAlarmHistorySpecific | 1.3.6.1.4.1.6296.101.4.4.1.1.2 | SpecificNum | read-only | The OID of alarm. The following alarms is devided by the specific character, ===============. The division basis is that alarms is bounded or released. 001: portDown: To detect whether physical or logical interface's link status is up or down. 002: portUp: =============== 003: portRemoved: To detect whether physical interface is installed or not. 004: portInstalled: =============== 005: powerFail: To detect whether power module's operation status is good or not. (Without doubt, more than 1 power module should be equipped.) 006: powerOK: =============== 007: powerRemoved: To detect whether power module is installed or not, through the PLD access. (Without doubt, more than 1 power module should be equipped.) 008: powerInstalled: =============== 009: fanFail: To detect whether FAN module's operation status is good or not. 010: fanOK: =============== 011: fanRemoved: To detect whether FAN module is installed or not, through the PLD access. 012: fanInstalled: =============== 013: moduleRemoved: To detect whether physical interface module is installed or not, through the S/W I2C 014: moduleInstalled: =============== 015: systemRestart: Network system is restarted by operator. This is not H/W start but S/W start. =============== 016: systemStart: Network system is restarted by operator or system status. This is not S/W start but H/W start. (This alarm isnt used current) =============== 017: broadcastOver: To detect the receipt of broadcast packet. (This alarm isnt used current) 018: broadcastUnder: =============== 019: cpuOverLoad: To detect whether the configured CPU load threshold is less than current CPU load usage or not. 020: cpuUnderLoad: =============== 021: memoryOverUsed: To detect whether the configured memory threshold is less than current memory usage or not. 022: memoryUnderUsed: =============== 023: portOverThreshold: To detect whether the configured physical or logical interface threshold is less than delta value of current interface's InOctects or not. 024: portUnderThreshold: =============== 025: temperatureHigh: To detect whether the configured system's temperature threshold is less than current temperature or not. 026: temperatureLow: =============== 027: mfgdBlocked: To detect whether the specific MAC by MAC flood guard is blocked or not. 028: mfgdReleased: =============== 029: ipConflict: To detect whether the same IP address on different network node is configured or not. 030: ipUnconflict: =============== 031: dhcpLeaseShortage: To detect whether IP address that can be assigned to subscriber by DHCP server is sufficient or not. 032: dhcpLeaseSufficient: =============== 033: dhcpOccuredIllegalEntry: To detect whether a subsceiber is using a static IP address or not. 034: dhcpRemovedIllegalEntry: =============== 035: rmonAlarmRising: To detect whether rising threshold of a specific MO in RMON alarm sampling is less than current calculated value by alarm sample type or not. But alarm generation would be issued by means of event type in RMON event. 036: rmonAlarmNoRising: =============== 037: rmonAlarmFalling: To detect whether falling threshold of a specific MO in RMON alarm sampling is less than current calculated value by alarm sample type or not. But alarm generation would be issued by means of event type in RMON event. 038: rmonAlarmNoFalling: =============== 039: bpduGuardDisabled: To detect whether edge ports is guarded about superior BPDU or not. In case of insertion edge node with 0 or lower priority than priority of current root bridge node, it will be disarrangement during a short time because of recognition a new inserted node as root bridge. So these edge ports is guarded, and then edge ports is blocked about all superior BPDU. So STP reconfiguration doesn't use this edge ports. =============== 040: rootGuardDisabled: To detect whether edge ports is guarded about superior BPDU or not. In case of insertion edge node with 0 or lower priority than priority of current root bridge node, it will be disarrangement during a short time because of recognition a new inserted node as root bridge. So, Root guard prevents a new inserted node from being root bridge as well as receiving a superior BPDU from root bridge. but this node participates in STP topology reconfiguration. If root bridge does not send a superior BPDU, then this node acts usually though STP state change. =============== 041: portSecurity: To detect whether interface is configured for security or not. This can be used to prevent MAC from flooding as well as spoofing. That is, As a result, this will obstruct an attack as like DoS attack. =============== 042: userLogin: 043: userLogout: =============== 051: igmpGroupJoined: To detect whether a subscriber is joined a multicast group or not. 052: igmpGroupLeaved: =============== 053: dhcpIpaddressBound: To detect wether a dynamic IP address is assigned to a subscriber or not. 054: dhcpIpaddressFree: =============== 055: doorOpened: To detect whether outer door is opeded or not, as external alarm. 056: doorClosed: =============== 057: powerModeChangedPowerToBattery: To detect whether a system is using AC power or battery. A system is using AC power usually. If there is any power problems as like a power failure, a system is using battery instead of AC power. 058: powerModeChangedBatteryToPower: =============== 059: batterylowcapacity: To detect whether current battery capacity is less capacity threshold according to battery usage or not. The capacity of AC power is 16 voltage and battery is 20. Capacity threshold is configured by H/W specification. So operator can't change it. 060: batterynormalcapacity: =============== 061: batteryhighTemperature: To detect whether current temperature of battery is greater than temperature threshold or not. 062: batterynormalTemperature: =============== 063: authenticationFail: To detect whether the connected user is authentic or non-authentic. 064: authenticationNofail: =============== 065: psuAcHighTemperature: To detect whether current temperature of Power Supply Unit is greater than temperature threshold or not. 066: psuAcNormalTemperature: =============== 067: batteryRemoved: To detect whether battery is equipped at network system or not. Battery is used as redundancy power service. So operator can decide the installation of battery. 068: batteryEquipped: =============== 069: batteryLowVoltage: To detect whether battery voltage is less than 12.5 volt or not. 12.5 volt value is configured by H/W specification. So operator can't change it. 070: batteryNormalVoltage: =============== 071: adminAccessLogin: To detect whether a operator connects at this network system or not. 072: adminAccessLogout: =============== 073: cfgdBlocked: To detect whether it is blocked flood to CPU or not. 074: cfgdReleased: =============== 075: sfgdBlocked: To detect whether it is blocked flood to system or not. 076: sfgdReleased: =============== 077: swWatchdogAbnormalState: To detect whether a specific process acts normally or not. 078: swWatchdogNormalState: =============== 079: swWatchdogDetectError: To detect whether a specific process is detected a error related to itself or cleared. 080: swWatchdogClearError: =============== 081: ppsControlBlocked: To detect whether it is blocked by pps-control or not. 082: ppsControlReleased: =============== 083: gotDMITempHighOverAlarm: To detect whether internal temperature exceeds high alarm level or not. 084: gotDMITempHighFallAlarm: =============== 085: gotDMITempLowOverAlarm: To detect whether internal temperature is below low alarm level or not. 086: gotDMITempLowFallAlarm: =============== 087: gotDMITempHighOverWarning: To detect whether internal temperature exceeds high warning level or not. 088: gotDMITempHighFallWarning: =============== 089: gotDMITempLowOverWarning: To detect whether internal temperature is below low warning level or not. 090: gotDMITempLowFallWarning: =============== 091: gotDMIVolHighOverAlarm: To detect whether internal supply voltage exceeds high alarm level or not. 092: gotDMIVolHighFallAlarm: =============== 093: gotDMIVolLowOverAlarm: To detect whether internal supply voltage is below low alarm level or not. 094: gotDMIVolLowFallAlarm: =============== 095: gotDMIVolHighOverWarning: To detect whether internal supply voltage exceeds high warning level or not. 096: gotDMIVolHighFallWarning: =============== 097: gotDMIVolLowOverWarning: To detect whether internal supply voltage is below low warning level or not. 098: gotDMIVolLowFallWarning: =============== 099: gotDMITxBiasHighOverAlarm: To detect whether TX Bias current exceeds high alarm level or not. 100: gotDMITxBiasHighFallAlarm: =============== 101: gotDMITxBiasLowOverAlarm: To detect whether TX Bias current is below low alarm level or not. 102: gotDMITxBiasLowFallAlarm: =============== 103: gotDMITxBiasHighOverWarning: To detect whether TX Bias current exceeds high warning level or not. 104: gotDMITxBiasHighFallWarning: =============== 105: gotDMITxBiasLowOverWarning: To detect whether TX Bias current is below low warning level or not. 106: gotDMITxBiasLowFallWarning: =============== 107: gotDMITxPowerHighOverAlarm: To detect whether TX output power exceeds high alarm level or not. 108: gotDMITxPowerHighFallAlarm: =============== 109: gotDMITxPowerLowOverAlarm: To detect whether TX output power is below low alarm level or not. 110: gotDMITxPowerLowFallAlarm: =============== 111: gotDMITxPowerHighOverWarning: To detect whether TX output power exceeds high warning level or not. 112: gotDMITxPowerHighFallWarning: =============== 113: gotDMITxPowerLowOverWarning: To detect whether TX output power is below low warning level or not. 114: gotDMITxPowerLowFallWarning: =============== 115: gotDMIRxPowerHighOverAlarm: To detect whether RX output power exceeds high alarm level or not. 116: gotDMIRxPowerHighFallAlarm: =============== 117: gotDMIRxPowerLowOverAlarm: To detect whether RX output power is below low alarm level or not. 118: gotDMIRxPowerLowFallAlarm: =============== 119: gotDMIRxPowerHighOverWarning: To detect whether RX output power exceeds high warning level or not. 120: gotDMIRxPowerHighFallWarning: =============== 121: gotDMIRxPowerLowOverWarning: To detect whether RX output power is below low warning level or not. 122: gotDMIRxPowerLowFallWarning: =============== 123: nosRemoteUpgradeRequest: 124: nosRemoteUpgradeSuccess: 125: nosRemoteUpgradeFailAbort: 126: nosRemoteUpgradeFailHeaderError: 127: nosRemoteUpgradeFailDownloadError: 128: nosRemoteUpgradeFailFlashError: 129: nosRemoteUpgradeStart: =============== 130: systemDyingGasp: =============== 133: cliHistory: To detect whether CLI history is detected or not. 134: cliHistoryNo: =============== 135: ntpConnectionFail: To detect whether NTP connection is failed or not. 136: ntpConnectionFailNo: =============== 137: nmsConnectionTypeChanged: To detect whether NMS connection type is changed. =============== 159: clockModuleRemoved: To detect whether clock module is removed or installed. 160: clockModuleInstalled: 161: clockModuleInitFail: To detect whether clock module initiolization is failed or not. 162: clockModuleInitOk: =============== 163: cliHistoryLog: To detect whether CLI history log is over or not. 164: cliHistoryLogNo: =============== 165: slotActionEvent: To detect whether slot action is changed. 166: slotStateChange: To detect whether slot state is changed. =============== 167: interfaceAdminDown: To detect whether physical or logical interface's admin link status is up or down. 168: interfaceAdminUp: =============== 169: slotPowerMonAbnormal: To detect whether slot power monitor abnormal or normal is detected. 170: slotPowerMonNormal: =============== 171: slotErrorLEDChanged: To detect whether error LED is changed. =============== 185: cpuPpsOverThreshold: To detect whether PPS is over threshold or not. 186: cpuPpsUnderThreshold: =============== 199: slotHealthStatusTimeout: To detect whether slot health status is time out or not. 200: slotHealthStatusTimeoutCleared: =============== 201: advaTemperature: To detect whether current chassis temperature is less than chassis temperature threshold or not. 202: advaTemperatureNo: =============== 203: advaPSUFailure: To detect whether ADVA system's power supply unit has a failure or not. 204: advaPSUFailureNo: =============== 205: advaFanFailure: To detect whether ADVA system's FAN has a failure or not. 206: advaFanFailureNo: =============== 207: advaInterfaceReceiveFailure: To detect whether ADVA system's receipt has a failure or not. 208: advaInterfaceReceiveFailureNo: =============== 209: advaInterfaceOpticalThreshold: To detect whether Adva system's optical receive power level is less than optical threshold or not. 210: advaInterfaceOpticalThresholdNo: =============== 211: advaInterfaceTransmitFault: To detect whether ADVA system's transmission has a failure or not. 212: advaInterfaceTransmitFaultNo: =============== 213: dvaInterfaceMisconfiguration: To detect whether ADVA system's interface is configured rightly or not. 214: advaInterfaceMisconfigurationNo: =============== 215: advaInterfaceSFPMismatch: To detect whether ADVA system's SFP interface is mismatched or not. 216: advaInterfaceSFPMismatchNo: =============== 217: advaVoltageLow: To detect whether ADVA system's current voltage is less than voltage threshold or not. 218: advaVoltageLowNo: =============== 219: advaVoltageHigh: To detect whether ADVA system's current voltage is greater than voltage threshold or not. 220: advaVoltageHighNo: =============== 301: erpDomainLotp: To detect whether LOTP(Loss of Test Packet) exists a domain of ERP or not. The Loss of Test Packet defect is defined when a node does not receive any test packet at any of its ports for a period of 3 times. 302: erpDomainLotpNo: =============== 303: erpDomainULotp: To detect whether undirectional LOTP(Loss of Test Packet) exists a domain of ERP or not. The Loss of Test Packet defect is defined when a RM node of one domain does not receive any test packet at one port for a period of 3 times. 304: erpDomainULotpNo: =============== 305: erpDomainMultipleRM: To detect whether Multiple RM node is supported or not. The defect is raised when a RM node receives its own test packets with an Ack destination address field with a non-zero value. 306: erpDomainMultipleRMNo: =============== 307: erpDomainRMNodeReacheablity: To detect whether RM reachability is raised or not. The detection of multiple failures indicates that the ring is segmented and that the RM Node is unreacheable. This is only possible at normal ring nodes isolated from the RM node. 308: erpDomainRMNodeReacheablityNo: =============== 391: startupConfigLoadEnded: To detect whether startup configuration load is ended. =============== 401: eponOnuDeregister: To detect whether ONU is registered into OLT or not. That is, ONU that its operation is service on should be sent registration information to OLT. 402: eponOnuRegister: =============== 403: eponOnuRegistrationError: To detect whether ONU is failed registeration process into OLT. 404: eponOnuNoRegistrationError: =============== 405: eponBadEncryptionKey: To detect wwhether the encryption key is valid or not. A message between ONU and OLT is encrypted using random encryption key. There is that the encryption key is invalid as transmission failure from time to time. 406: eponNoBadEncryptionKey: =============== 407: eponLlidMistmatch: To detect whether Llid of message between ONU and OLT is valid or not. On registering, ONU informs unique ID to OLT. And then, all communication between ONU and OLT must use the unique ID. The unique ID is called Llid. 408: eponNoLlidMismatch: =============== 409: eponTooManyRegister: To detect whether the registered ONU per 1 OLT is greater than 32 or not. That is, ONU can be registered from 1 to the maximum 32 at 1 OLT. 410: eponNoTooManyRegister: =============== 411: eponDyingGASP: To detect whether a ONU is down from dying gasp or not. A ONU could be changed to down state as a number of reasons. By the way, ONU that is changed to down as dying gasp would be sent dying gasp signal to OLT and then ONU's link would be changed to down. 412: eponNoDyingGASP: =============== 413: eponOnuErrFramePeriod: 414: eponOnuNoErrFramePeriod: =============== 415: eponOnuErrFrame: 416: eponOnuNoErrFrame: =============== 417: eponOnuErrFrameSecondSummary: 418: eponOnuNoErrFrameSecondSummary: =============== 419: eponOnuLastOnuDeregister: To detect whether a deregistered ONU is last ONU or not. If a deregistered ONU is last ONU, the OLT would be changed to serviceable status. 420: eponOnuNoLastOnuDeregister: =============== 421: eponOltCableDown: 422: eponOltRecoverCableDown: =============== 501: autoCLIStart: To detect whether the scheduled auto CLI is started or not. 502: autoCLINoStart: =============== 503: autoCLIComplete: To detect whether the scheduled auto CLI is completed or not. 504: autoCLINoComplete: =============== 505: autoCLIRemoveOutputFile: To detect whether the result file of the scheduled auto CLI is removed or not. The reason that the result file is removed is that the configured file size for the result is less than the stored result file size. If so, the oldest file would be removed before everything. 506: autoCLINoRemoveOutputFile: =============== 507: autoResetSystem: To detect whether the system is restarted or not. The conditions that system is restarted is that ping loss threshold is less than current ping loss count during the configured interval and that current free memory size is less than configured free memory size. 508: autoResetNoSystem: =============== 509: autoResetPingReplyLoss: To detect whether ping reply from the designated network node is received or not. Operator designates any gateway system that can communicate to detect current network environment. System sends ICMP packet to the designated gateway system periodically. If the system doesn't receive ping reply packet within any interval, operator recognizes that the system can't communicate any more because of some problems of the system. 510: autoResetNoPingReplyLoss: =============== 511: autoResetMemoryLeakDetect: To detect whether current free memory size is less than the configured free memory size or not. Periodically, free memory size is checked to confirm system availability. 512: autoResetNoMemoryLeakDetect: =============== 601: arulePacketDropDetect: To detect whether it is dropped some packet by arule or not. 602: arulePacketDropRelease: =============== 620: bME1CardNoDetect: 621: clearBME1CardNoDetect: =============== 622: bME1CardAFEerror: 623: clearBME1CardAFEerror: =============== 624: bME1CardIFEerror: 625: clearBME1CardIFEerror: =============== 626: bME1CardFWerror: 627: clearBME1CardFWerror: =============== 628: bME1CardPROVerror: 629: clearBME1CardPROVerror: =============== 630: bME1CrashDetect: 631: clearBME1CrashDetect: =============== 632: bME2CardNoDetect: 633: clearBME2CardNoDetect: =============== 634: bME2CardAFEerror: 635: clearBME2CardAFEerror: =============== 636: bME2CardIFEerror: 637: clearBME2CardIFEerror: =============== 638: bME2CardFWerror: 639: clearBME2CardFWerror: =============== 640: bME2CardPROVerror: 641: clearBME2CardPROVerror: =============== 642: bME2CrashDetect: 643: clearBME2CrashDetect: =============== 644: bME3CardNoDetect: 645: clearBME3CardNoDetect: =============== 646: bME3CardAFEerror: 647: clearBME3CardAFEerror: =============== 648: bME3CardIFEerror: 649: clearBME3CardIFEerror: =============== 650: bME3CardFWerror: 651: clearBME3CardFWerror: =============== 652: bME3CardPROVerror: 653: clearBME3CardPROVerror: =============== 654: bME3CrashDetect: 655: clearBME3CrashDetect: =============== 656: powerFromBattery: 657: clearPowerFromBattery: =============== 658: invalidBatteryStatus: 659: clearInvalidBatteryStatus: =============== 660: batteryChargeLow: 661: clearBatteryChargeLow: =============== 662: batteryNotPresent: 663: clearBatteryNotPresent: =============== 664: voltageLow: 665: clearVoltageLow: =============== 666: tempOverThreshold: 667: clearTempOverThreshold: =============== 668: tempUnderThreshold: 669: clearTempUnderThreshold: =============== 670: cpuOverThreshold: 671: clearCpuOverThreshold: =============== 672: trafficOverload: 673: clearTrafficOverload: =============== 674: gEPONModuleNotDetect: 675: clearGEPONModuleNotDetect: =============== 676: gEPONPortOperationDown: 677: clearGEPONPortOperationDown: =============== 678: gEPONNoIncomingTraffic: 679: clearGEPONNoIncomingTraffic: =============== 680: processCrashDetect: 681: clearProcessCrashDetect: =============== 682: memoryLeakDetect: 683: clearMemoryLeakDetect: =============== 684: memoryCorrupDetect: 685: clearMemoryCorrupDetect: =============== 686: memoryLowDetect: 687: clearMemoryLowDetect: =============== 688: dataLineerror: 689: clearDataLineerror: =============== 690: addressLineerror: 691: clearAddressLineerror: =============== 692: chipsetNotDetcet: 693: clearChipsetNotDetcet: =============== 694: pciBuserror: 695: clearPciBuserror: =============== 696: securityAdminConnect: 697: clearSecurityAdminConnect: =============== 698: oNUPowerDown: 699: clearONUPowerDown: =============== 700: oNUNotRegister: 701: clearONUNotRegister: =============== 702: oNTOpticPre: 703: clearONTOpticPre: =============== 800: switchoverInitiated: =============== 801: switchoverDone: =============== 803: redConfigurationMisMatch: To detect whether redundancy configuration is mismatched. =============== 901: gponNoAuthCBU: To detect no auth CBU is detected. 902: gponDuplicateONU: To detect ONU is duplicated. 903: gponDyingGasp: To detect dying GASP is detected. 904: gponUpgradeComplete: To detect upgrade complete is detected. 905: gponDeregistered: To detect whether deregistered is detected or not. 906: gponRegistered: 907: gponRogueOnu: To detect rogue ONU is detected 908: gponOnuBatteryEvent: To detect whether ONU battery event is detected or not. 909: clearGponOnuBetteryEvent: 910: gponOnuPortOperStatus: To detectONU port operation statue is chagned. 911: gponTransceiverChanged: To detect transceiver is changed. 912: gponOltLosOn: To detect whether OLT LOS is on or off 913: gponOltLosOff: 914: gponOltLosiOn: To detect whether OLT LOSI is on or off 915: gponOltLosiOff: 916: gponDyingGaspOn: To detect whether dying GASP is on or off 917: gponDyingGaspOff: 918: gponOntOSUpgradeStatus: To detect ONT OS upgrade status is changed. 919: gponOntBLUpgradeStatus: To detect BL upgrade status is changed. 920: gponOltRxPowerLoss: To detect OLT RX power is loss. 921: gponOltRxPowerDetected: To detect OLT RX power status is changed. 922: gponOnuTemperatureHighOverThreshold: To detect whether ONU temperature exceeds high threshold or not. 923: gponOnuTemperatureHighFallThreshold: 924: gponOnuTemperatureLowOverThreshold: To detect whether ONU temperature belows low threshold or not. 925: gponOnuTemperatureLowFallThreshold: 926: gponOnuCpuOverThreshold: To detect whether ONU CPU exceeds threshold or not. 927: gponOnuCpuFallThreshold: 928: gponOnuMemoryOverThreshold: To detect whether memory exceeds threshold or not. 929: gponOnuMemoryFallThreshold: 930: gponOnuI2cFail: To detect ONU L2C fail is detected. 931: gponOnuRxOpticLowThreshAlarmOn: To detect whether ONU RX optic belows low threshold or not. 932: gponOnuRxOpticLowThreshAlarmOff: 933: gponOnuRxOpticHighThreshAlarmOn: To detect whether ONU RX optic exceeds high threshold or not. 934: gponOnuRxOpticHighThreshAlarmOff: 935: gponOltLOFIOn: To detect whether OLT LOFL is on or off 936: gponOltLOFIOff: 937: gponOltDOWOn: To detect whether OLT DOW is on or off 938: gponOltDOWOff: 939: gponOltSFOn: To detect whether OLT SF is on or off 940: gponOltSFOff: 941: gponOltSDOn: To detect whether OLT SD is on or off 942: gponOltSDOff: 943: gponOltLCDGIOn: To detect whether OLT LCDGL is on or off 944: gponOltLCDGIOff: 945: gponOltRDOn: To detect whether OLT RD is on or off 946: gponOltRDOff: 947: gponOltSUFOn: To detect whether OLT SUF is on or off 948: gponOltSUFOff: 949: gponOltLOAOn: To detect whether OLT LOA is on or off 950: gponOltLOAOff: 951: gponOltLOAMIOn: To detect whether OLT LOAML is on or off 952: gponOltLOAMIOff: 953: gponOltMEMOn: To detect whether OLT MEM is on or off 954: gponOltMEMOff: 955: gponOltPEEOn: To detect whether OLT PEE is on or off 956: gponOltPEEOff: 957: gponOltPSTOn: To detect whether OLT PST is on or off 958: gponOltPSTOff: 959: gponOltERROn: To detect whether OLT ERR is on or off 960: gponOltERROff: 961: gponOltREIOn: To detect whether OLT REI is on or off 962: gponOltREIOff: 963: gponAntiSpoofingDupPortOn: To detect whether anti spoofing port is duplicated or not. 964: gponAntiSpoofingDupPortOff: 965: gponRedundancySwitchOver: To detect redundancy switchover is changed. 966: gponDuplicatedRangingResponse: To detect ranging response is changed. 967: gponOnuPortOpticModuleRemove: To detect whether ONU port optic module is removed or installed. 968: gponOnuPortOpticModuleInstall: 969: gponOnuOMCCProblemDetected: To detect whether ONU OMCC problem is detected or not. 970: gponOnuOMCCProblemCleared: 971: gponOltFixedTcontAlarmOn: To detect whether OLT fixed Tcont alarm is on or off. 972: gponOltFixedTcontAlarmOff: 973: gponOltDynamicTcontAlarmOn: To detect whether OLT dynamic Tcont alarm is on or off. 974: gponOltDynamicTcontAlarmOff: 975: gponOltPortCountAlarmOn: To detect whether OLT port count alarm is on or off. 976: gponOltPortCountAlarmOff: 977: gponOltCableDownAlarmOn: To detect whether OLT cable down alarm is on or off. 978: gponOltCableDownAlarmOff: 979: gponOltDeactiveMonitorAlarmOn: To detect whether deactive monitor alarm is on or off. 980: gponOltDeactiveMonitorAlarmOff: 981: gponOltDfiOn: To detect whether OLT DFI is on or off. 982: gponOltDfiOff: 984: gponOltTransceiverPortChanged: To detect OLT transeiver port is changed. 985: gponOnuPortOperStatusDown: To detect whether ONU port operation status is down or up. 986: gponOnuPortOperStatusUp:: =============== 1101: emLogDefectCPUHighOver: To detect whether EM log detect CPU exceeds threshold or not. 1102: emLogDefectCPUHighUnder: 1103: emLogTemperHighOver: To detect whether EM log temperature exceeds high threshold or not. 1104: emLogTemperHighUnder: 1105: emLogTemperLowUnder: To detect whether EM log CPU belows low threshold or not. 1106: emLogTemperLowOver: 1107: emLogMemLowUnder: To detect whether EM log memory belows low threshold or not. 1108: emLogMemLowOver: 1109: emLogFanFail: To detect whether EM log fan status is failed or not. 1110: emLogFanFailCleared: 1111: emLogPhyCRCFail: To detect whether EM log physical CRC is failed or not. 1112: emLogPhyCRCFailCleared: 1113: emLogPhyDetectFail: To detect whether EM log physical status is failed or not. 1114: emLogPhyDetectFailCleared: 1115: emLogSFUMateInitFail: To detect whether EM log SFU mate initialization is failed or not. 1116: emLogSFUMateInitFailCleared: 1117: emLogDaemonHealthBad: To detect whether EM log daemon health is bad or not. 1118: emLogDaemonHealthBadCleared: 1119: emLogGPIURavenLinkDown: To detect whether EM log GPIU RAVEN link is down or not. 1120: emLogGPIURavenLinkDownCleared: =============== 1151: slotNosUpgradeStart: To detect whether slot NOS upgrade is started or ended. 1152: slotNosUpgradeEnd: =============== 1331: gponOnuAniVoltageLowThreshAlarmOn: To detect whether ONU ANI voltage belows low threshold or not. 1332: gponOnuAniVoltageLowThreshAlarmOff: 1333: gponOnuAniVoltageHighThreshAlarmOn: To detect whether ONU ANI voltage exceeds high threshold or not. 1334: gponOnuAniVoltageHighThreshAlarmOff: 1335: gponOnuAniTemperatureLowThreshAlarmOn: To detect whether ONU ANI temperature belows low threshold or not. 1336: gponOnuAniTemperatureLowThreshAlarmOff: 1337: gponOnuAniTemperatureHighThreshAlarmOn: To detect whether ONU ANI temperature exceeds high threshold or not. 1338: gponOnuAniTemperatureHighThreshAlarmOff: 1339: gponOnuAniTxBiasLowThreshAlarmOn: To detect whether ONU ANI TX bias belows low threshold or not. 1340: gponOnuAniTxBiasLowThreshAlarmOff: 1341: gponOnuAniTxBiasHighThreshAlarmOn: To detect whether ONU ANI TX bias exceeds high threshold or not. 1342: gponOnuAniTxBiasHighThreshAlarmOff: 1343: gponOnuAniTxpowerLowThreshAlarmOn: To detect whether ONU ANI TX power belows low threshold or not. 1344: gponOnuAniTxpowerLowThreshAlarmOff: 1345: gponOnuAniTxpowerHighThreshAlarmOn: To detect whether ONU ANI TX power exceeds high threshold or not. 1346: gponOnuAniTxpowerHighThreshAlarmOff: |
| INT sleAlarmHistorySeverity | 1.3.6.1.4.1.6296.101.4.4.1.1.3 | INTEGER | read-only | The severity of alarm. |
| OCT sleAlarmHistoryText | 1.3.6.1.4.1.6296.101.4.4.1.1.4 | OCTET STRING | read-only | Textual description of specific problem reported by alarming. To be discussed: Option is to define an alarm for every problem |
| I32 sleAlarmHistoryTime | 1.3.6.1.4.1.6296.101.4.4.1.1.5 | Integer32 | read-only | The severity of alarm. |
| C32 sleAlarmHistorySeqNum | 1.3.6.1.4.1.6296.101.4.4.1.1.6 | Counter32 | read-only | Sequence number for the alarm synchronization. This value has a number to be used for the next alarm trap. |
| INT sleAlarmHistoryPairType | 1.3.6.1.4.1.6296.101.4.4.1.1.7 | INTEGER | read-only | The type is whether alarm trap is pair or mono. |
| sleAlarmHistoryControl | 1.3.6.1.4.1.6296.101.4.4.2 | |||
| INT sleAlarmHistoryControlRequest | 1.3.6.1.4.1.6296.101.4.4.2.1 | INTEGER | read-write | This attribute identifies the control commands. updateAlarmList: the NE updates entries of alarms in the sleAlarmListTable after having changed alarm severities of alarms (due to change profile pointers in managed entities or after modification of alarm severities in profiles). This command should be applied once after having finisled modifications of severties. modifyAlarmSeverity: modifies the severity of an alarm in specific profile. createAlarmSeverityProfile: creates a new profile with default severities. The severities then have to be modified with command changeAlarmSeverity. deleteAlarmSeverityProfile: deletes a profile. Profile 1 is not allowed to be deleted. Notifications : none |
| SLE sleAlarmHistoryControlStatus | 1.3.6.1.4.1.6296.101.4.4.2.2 | SleControlStatusType | read-only | The status of a control request. |
| U32 sleAlarmHistoryControlTimer | 1.3.6.1.4.1.6296.101.4.4.2.3 | Unsigned32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleAlarmHistoryControlTimeStamp | 1.3.6.1.4.1.6296.101.4.4.2.4 | TimeTicks | read-only | The time stamp of the last command (end of command). |
| SLE sleAlarmHistoryControlReqResult | 1.3.6.1.4.1.6296.101.4.4.2.5 | SleControlRequestResultType | read-only | The result of the last user command. |
| sleAlarmHistoryNotification | 1.3.6.1.4.1.6296.101.4.4.3 | |||
| NTF sleAlarmHistoryCleared | 1.3.6.1.4.1.6296.101.4.4.3.1 | Description. | ||
| sleEfmOam | 1.3.6.1.4.1.6296.101.4.5 | |||
| sleEfmOamTable | 1.3.6.1.4.1.6296.101.4.5.1 | not-accessible | Description. | |
| sleEfmOamEntry | 1.3.6.1.4.1.6296.101.4.5.1.1 | not-accessible | Description. | |
| INT sleOamPortIndex | 1.3.6.1.4.1.6296.101.4.5.1.1.1 | INTEGER | read-only | Description. |
| INT sleOamMuxAction | 1.3.6.1.4.1.6296.101.4.5.1.1.2 | INTEGER | read-only | This value governs the flow of frames from the MAC client to the Muliplexer function. |
| INT sleOamParAction | 1.3.6.1.4.1.6296.101.4.5.1.1.3 | INTEGER | read-only | This value governs the flow of non-OAMPDUs within the Parser function. |
| INT sleOamAdminState | 1.3.6.1.4.1.6296.101.4.5.1.1.4 | INTEGER | read-only | This object is used to provision the default administrative OAM mode for this interface. |
| INT sleOamMode | 1.3.6.1.4.1.6296.101.4.5.1.1.5 | INTEGER | read-only | This object configures the mode of OAM operation for this Ethernet like interface. |
| INT sleOamUnidirectionMode | 1.3.6.1.4.1.6296.101.4.5.1.1.6 | INTEGER | read-only | Description. |
| BIT sleOamFunctionsSupported | 1.3.6.1.4.1.6296.101.4.5.1.1.7 | Bits | read-only | The OAM functions supported on this Ethernet like interface. |
| INT sleOamPeerStatus | 1.3.6.1.4.1.6296.101.4.5.1.1.8 | INTEGER | read-only | This object indicates whether the information in this row should be considered valid. |
| MAC sleOamPeerMacAddress | 1.3.6.1.4.1.6296.101.4.5.1.1.9 | MacAddress | read-only | The MAC address of the peer OAM entity. |
| INT sleOamPeerMode | 1.3.6.1.4.1.6296.101.4.5.1.1.10 | INTEGER | read-only | The mode Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. |
| BIT sleOamPeerFunctionsSupported | 1.3.6.1.4.1.6296.101.4.5.1.1.11 | Bits | read-only | The OAM functions supported on this Ethernet like interface. |
| INT sleOamRemLoopback | 1.3.6.1.4.1.6296.101.4.5.1.1.12 | INTEGER | read-only | Description. |
| INT sleOamRemLoopbackCnt | 1.3.6.1.4.1.6296.101.4.5.1.1.13 | INTEGER | read-only | The number of test Packet |
| INT sleOamLm | 1.3.6.1.4.1.6296.101.4.5.1.1.14 | INTEGER | read-only | This value indicates whether Link-Monitor supports or not for port index. |
| INT sleOamLmAction | 1.3.6.1.4.1.6296.101.4.5.1.1.15 | INTEGER | read-only | The Action of Link-Monitor for port index. |
| INT sleOamLmFrameWindow | 1.3.6.1.4.1.6296.101.4.5.1.1.16 | INTEGER | read-only | This value is the Window size of Errored Frame. Default : 10, Unit : 100ms |
| INT sleOamLmFrameThresh | 1.3.6.1.4.1.6296.101.4.5.1.1.17 | INTEGER | read-only | This value is the Threshold size of Errored Frame. Default: 1 |
| C64 sleOamLmFrameTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.18 | Counter64 | read-only | Total Count of Errored Frame |
| I32 sleOamLmFramePeriodWindow | 1.3.6.1.4.1.6296.101.4.5.1.1.19 | Integer32 | read-only | This value is size of Errored Period Window. Default : 1000000 frames |
| I32 sleOamLmFramePeriodThresh | 1.3.6.1.4.1.6296.101.4.5.1.1.20 | Integer32 | read-only | This value is size of Errored Period Threshold. Default : 10 |
| C64 sleOamLmFramePeriodTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.21 | Counter64 | read-only | Total Count of Errored Period Frame |
| I32 sleOamLmFrameSecondSummaryWindow | 1.3.6.1.4.1.6296.101.4.5.1.1.22 | Integer32 | read-only | This value is the Window size of errored frame in a second Default : 60 secs |
| I32 sleOamLmFrameSecondSummaryThresh | 1.3.6.1.4.1.6296.101.4.5.1.1.23 | Integer32 | read-only | This value is the Threshold size of errored frame in a second Default: 1 |
| C64 sleOamLmFrameSecondSummaryTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.24 | Counter64 | read-only | Total Count of Errored Frame Second |
| INT sleOamLmSymbolPeriodWindow | 1.3.6.1.4.1.6296.101.4.5.1.1.25 | INTEGER | read-only | This value is the window size of symbol errors. Default: 625 millions, Unit: 1 million |
| INT sleOamLmSymbolPeriodThresh | 1.3.6.1.4.1.6296.101.4.5.1.1.26 | INTEGER | read-only | This value is the Threshold size of symbol errors Default : 1 |
| C64 sleOamLmSymbolPeriodTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.27 | Counter64 | read-only | Total Count of Symbol errors |
| I32 sleOamLmRemSeqNum | 1.3.6.1.4.1.6296.101.4.5.1.1.28 | Integer32 | read-only | This value is the Sequence Number for event |
| I32 sleOamLmRemFrameLength | 1.3.6.1.4.1.6296.101.4.5.1.1.29 | Integer32 | read-only | This value is the Length of Errored Frame |
| TIK sleOamLmRemFrameTimeStamp | 1.3.6.1.4.1.6296.101.4.5.1.1.30 | TimeTicks | read-only | This value is the TimeStamp of Errored Frame |
| I32 sleOamLmRemFrameWindow | 1.3.6.1.4.1.6296.101.4.5.1.1.31 | Integer32 | read-only | This value is the Window Size of Errored Frame |
| I32 sleOamLmRemFrameThresh | 1.3.6.1.4.1.6296.101.4.5.1.1.32 | Integer32 | read-only | This value is the Threshold Size of Errored Frame |
| I32 sleOamLmRemFrameErrors | 1.3.6.1.4.1.6296.101.4.5.1.1.33 | Integer32 | read-only | This value is the Count of Errored Frame |
| C64 sleOamLmRemFrameErrorRunTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.34 | Counter64 | read-only | This value is the Total Count of Errored Frame |
| I32 sleOamLmRemFrameEventRunTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.35 | Integer32 | read-only | This value is the Total Count of Errored Frame Event |
| I32 sleOamLmRemFramePeriodLength | 1.3.6.1.4.1.6296.101.4.5.1.1.36 | Integer32 | read-only | This value is the Length of Errored Frame Period |
| TIK sleOamLmRemFramePeriodTimeStamp | 1.3.6.1.4.1.6296.101.4.5.1.1.37 | TimeTicks | read-only | This value is the TimeStamp of Errored Frame Period |
| I32 sleOamLmRemFramePeriodWindow | 1.3.6.1.4.1.6296.101.4.5.1.1.38 | Integer32 | read-only | This value is the Window Size of Errored Frame Period |
| I32 sleOamLmRemFramePeriodThresh | 1.3.6.1.4.1.6296.101.4.5.1.1.39 | Integer32 | read-only | This value is the Threshold Size of Errored Frame Period |
| I32 sleOamLmRemFramePeriodErrors | 1.3.6.1.4.1.6296.101.4.5.1.1.40 | Integer32 | read-only | This value is the Count of Errored Frame Period |
| C64 sleOamLmRemFramePeriodErrorRunTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.41 | Counter64 | read-only | This value is the Total Count of Errored Frame Period |
| I32 sleOamLmRemFramePeriodEventRunTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.42 | Integer32 | read-only | This value is the Total Count of Errored Frame Period Event |
| I32 sleOamLmRemFrameSecondSummaryLength | 1.3.6.1.4.1.6296.101.4.5.1.1.43 | Integer32 | read-only | This value is the Length of Errored Frame Second Summary |
| TIK sleOamLmRemFrameSecondSummaryTimeStamp | 1.3.6.1.4.1.6296.101.4.5.1.1.44 | TimeTicks | read-only | This value is the TimeStamp of Errored Frame Second Summary |
| I32 sleOamLmRemFrameSecondSummaryWindow | 1.3.6.1.4.1.6296.101.4.5.1.1.45 | Integer32 | read-only | This value is the Window size of Errored Frame Second Summary |
| I32 sleOamLmRemFrameSecondSummaryThresh | 1.3.6.1.4.1.6296.101.4.5.1.1.46 | Integer32 | read-only | This value is the Threshold size of Errored Frame Second Summary |
| I32 sleOamLmRemFrameSecondSummaryErrors | 1.3.6.1.4.1.6296.101.4.5.1.1.47 | Integer32 | read-only | This value is the Count of Errored Frame Second Summary |
| I32 sleOamLmRemFrameSecondSummaryErrorRunTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.48 | Integer32 | read-only | This value is the Total Count of Errored Frame Second Summary |
| I32 sleOamLmRemFrameSecondSummaryEventRunTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.49 | Integer32 | read-only | This value is the Total Count of Errored Frame Second Summary Event |
| I32 sleOamLmRemSymbolPeriodLength | 1.3.6.1.4.1.6296.101.4.5.1.1.50 | Integer32 | read-only | This value is the Length of Errored Symbols |
| TIK sleOamLmRemSymbolPeriodTimeStamp | 1.3.6.1.4.1.6296.101.4.5.1.1.51 | TimeTicks | read-only | This value is the TimeStamp of Errored Symbols |
| C64 sleOamLmRemSymbolPeriodWindow | 1.3.6.1.4.1.6296.101.4.5.1.1.52 | Counter64 | read-only | This value is the Window size of Errored Symbols |
| C64 sleOamLmRemSymbolPeriodThresh | 1.3.6.1.4.1.6296.101.4.5.1.1.53 | Counter64 | read-only | This value is the Threshold size of Errored Symbols |
| C64 sleOamLmRemSymbolPeriodErrors | 1.3.6.1.4.1.6296.101.4.5.1.1.54 | Counter64 | read-only | This value is the Count of Errored Symbols |
| C64 sleOamLmRemSymbolPeriodErrorRunTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.55 | Counter64 | read-only | This value is the Total Count of Errored Symbols |
| C64 sleOamLmRemSymbolPeriodEventRunTotal | 1.3.6.1.4.1.6296.101.4.5.1.1.56 | Counter64 | read-only | This value is the Total Count of Errored Symbols Event |
| sleEfmOamControl | 1.3.6.1.4.1.6296.101.4.5.2 | |||
| INT sleOamControlRequest | 1.3.6.1.4.1.6296.101.4.5.2.1 | INTEGER | read-write | The MIB object for the user command.. |
| SLE sleOamControlStatus | 1.3.6.1.4.1.6296.101.4.5.2.2 | SleControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution in process. |
| G32 sleOamControlTimer | 1.3.6.1.4.1.6296.101.4.5.2.3 | Gauge32 | read-write | Maximum command duration time in case of long running |
| TIM sleOamControlTimeStamp | 1.3.6.1.4.1.6296.101.4.5.2.4 | TimeStamp | read-only | Time stamp attribute set at end of command. |
| SLE sleOamControlReqResult | 1.3.6.1.4.1.6296.101.4.5.2.5 | SleControlRequestResultType | read-only | Command result attribute |
| I32 sleOamControlIndex | 1.3.6.1.4.1.6296.101.4.5.2.6 | Integer32 | read-write | Description. |
| INT sleOamControlPortAdminState | 1.3.6.1.4.1.6296.101.4.5.2.7 | INTEGER | read-write | This object is used to provision the default administrative OAM mode for this interface. |
| INT sleOamControlPortMode | 1.3.6.1.4.1.6296.101.4.5.2.8 | INTEGER | read-write | This object configures the mode of OAM operation for this Ethernet like interface. |
| INT sleOamControlPortUnidirectionMode | 1.3.6.1.4.1.6296.101.4.5.2.9 | INTEGER | read-write | Description. |
| INT sleOamControlPortRemLoopback | 1.3.6.1.4.1.6296.101.4.5.2.10 | INTEGER | read-write | The value indicates an optional data link layer frame-level loopback mode, which is controlled remotely. |
| I32 sleOamControlRemLoopbackPkCnt | 1.3.6.1.4.1.6296.101.4.5.2.11 | Integer32 | read-write | The number of test Packet |
| INT sleOamControlLm | 1.3.6.1.4.1.6296.101.4.5.2.12 | INTEGER | read-write | This value indicates whether Link-Monitor supports or not for port index. |
| INT sleOamControlLmAction | 1.3.6.1.4.1.6296.101.4.5.2.13 | INTEGER | read-write | The Action of Link-Monitor for port index. |
| INT sleOamControlLmFrameWindow | 1.3.6.1.4.1.6296.101.4.5.2.14 | INTEGER | read-write | This value is the Window size of Errored Frame. Default : 30 secs |
| INT sleOamControlLmFrameThresh | 1.3.6.1.4.1.6296.101.4.5.2.15 | INTEGER | read-write | This value is the Threshold size of Errored Frame. Default: 1 |
| INT sleOamControlLmFramePeriodWindow | 1.3.6.1.4.1.6296.101.4.5.2.16 | INTEGER | read-write | This value is size of Errored Period Window. Default : 1000000 frames |
| INT sleOamControlLmFramePeriodThresh | 1.3.6.1.4.1.6296.101.4.5.2.17 | INTEGER | read-write | This value is size of Errored Period Threshold. Default : 10 |
| INT sleOamControlLmFrameSecondSummaryWindow | 1.3.6.1.4.1.6296.101.4.5.2.18 | INTEGER | read-write | This value is the Window size of errored frame in a second Default : 60 secs |
| INT sleOamControlLmFrameSecondSummaryThresh | 1.3.6.1.4.1.6296.101.4.5.2.19 | INTEGER | read-write | This value is the Threshold size of errored frame in a second Default: 1 |
| INT sleOamControlLmSymbolPeriodWindow | 1.3.6.1.4.1.6296.101.4.5.2.20 | INTEGER | read-write | This value is the window size of symbol errors. Default: 625 millions, Unit: 1 million |
| INT sleOamControlLmSymbolPeriodThresh | 1.3.6.1.4.1.6296.101.4.5.2.21 | INTEGER | read-write | This value is the Threshold size of symbol errors Default : 1 |
| sleEfmOamNotification | 1.3.6.1.4.1.6296.101.4.5.3 | |||
| NTF sleEfmOamPortProfileChanged | 1.3.6.1.4.1.6296.101.4.5.3.1 | |||
| NTF sleEfmOamPortRemLoopback | 1.3.6.1.4.1.6296.101.4.5.3.2 | Description. | ||
| NTF sleEfmOamPortLinkMonitorChanged | 1.3.6.1.4.1.6296.101.4.5.3.3 | Description. | ||
| sleAdvaSystem | 1.3.6.1.4.1.6296.101.4.6 | |||
| sleAdvaSystemTable | 1.3.6.1.4.1.6296.101.4.6.1 | not-accessible | Description. | |
| sleAdvaSystemEntry | 1.3.6.1.4.1.6296.101.4.6.1.1 | not-accessible | Description. | |
| INT sleAdvaFSPOperationMode | 1.3.6.1.4.1.6296.101.4.6.1.1.1 | INTEGER | read-only | Mode in which the FSP 150 is to operate |
| INT sleAdvaActiveNetworkInterface | 1.3.6.1.4.1.6296.101.4.6.1.1.2 | INTEGER | read-only | Which of the network interfaces is the active one |
| INT sleAdvaForceNetworkInterface | 1.3.6.1.4.1.6296.101.4.6.1.1.3 | INTEGER | read-only | Description. |
| INT sleAdvaReportingInterval | 1.3.6.1.4.1.6296.101.4.6.1.1.4 | INTEGER | read-only | Repeat period in 1/10th seconds for Organisation Specific Alarm Status OAMPDU. If non-zero and there are any alarms active, repeat the last-sent AS after this interval from when it was last sent.If zero then only send on changes.As a special action, writing zero to this will cause the Alarm Status OAMPDU to be sent (poll). |
| INT sleAdvaNEMIFitted | 1.3.6.1.4.1.6296.101.4.6.1.1.5 | INTEGER | read-only | Indicator as to whether a NEMI is fitted. |
| INT sleAdvaForceReset | 1.3.6.1.4.1.6296.101.4.6.1.1.6 | INTEGER | read-only | Writing True (1) causes the system to be reset. |
| IP sleAdvaManagerAddress | 1.3.6.1.4.1.6296.101.4.6.1.1.7 | IpAddress | read-only | The IP address of the Management station monitoring this sytem. |
| INT sleAdvaMinRailVoltageThreshold | 1.3.6.1.4.1.6296.101.4.6.1.1.8 | INTEGER | read-only | Threshold in mV below which the Voltage low alarm will be activated. (Alarm Configuration) |
| INT sleAdvaMaxRailVoltageThreshold | 1.3.6.1.4.1.6296.101.4.6.1.1.9 | INTEGER | read-only | Threshold in mV above which the Voltage high alarm will be activated. (Alarm Configuration) |
| INT sleAdvaTemperatureThreshold | 1.3.6.1.4.1.6296.101.4.6.1.1.10 | INTEGER | read-only | Threshold in C above which the Temperature alarm will be activated. (Alarm Configuration) |
| OCT sleAdvaPartNumber | 1.3.6.1.4.1.6296.101.4.6.1.1.11 | OCTET STRING | read-only | Part number for the chassis. (Chassis) |
| OCT sleAdvaSerialNumber | 1.3.6.1.4.1.6296.101.4.6.1.1.12 | OCTET STRING | read-only | Serial number for the chassis. (Chassis) |
| OCT sleAdvaFirmwareVersion | 1.3.6.1.4.1.6296.101.4.6.1.1.13 | OCTET STRING | read-only | Firmware version for the chassis. (Chassis) (0-length string if unknown). |
| OCT sleAdvaFPGAVersion | 1.3.6.1.4.1.6296.101.4.6.1.1.14 | OCTET STRING | read-only | FPGA version for the chassis. (Chassis) (0-length string if unknown). |
| OCT sleAdvaHardwareRevision | 1.3.6.1.4.1.6296.101.4.6.1.1.15 | OCTET STRING | read-only | Hardware revision for the chassis. (Chassis)(0-length string if unknown). |
| OCT sleAdvaCLEICode | 1.3.6.1.4.1.6296.101.4.6.1.1.16 | OCTET STRING | read-only | CLEI for the chassis. (Chassis) |
| INT sleAdvaTemperature | 1.3.6.1.4.1.6296.101.4.6.1.1.17 | INTEGER | read-only | Current chassis temperature in degrees C. (Chassis) |
| INT sleAdvaRailVoltage | 1.3.6.1.4.1.6296.101.4.6.1.1.18 | INTEGER | read-only | Current DC power rail voltage (mV). (Chassis) |
| INT sleAdvaPSUStates | 1.3.6.1.4.1.6296.101.4.6.1.1.19 | INTEGER | read-only | Bit-mask representing the state of the PSUs. Starting at the LSB, each failed PSU is indicated by a bit set to '1'. (Chassis) |
| INT sleAdvaPSUType | 1.3.6.1.4.1.6296.101.4.6.1.1.20 | INTEGER | read-only | Type of PSUs fitted. (Chassis) |
| INT sleAdvaFansFitted | 1.3.6.1.4.1.6296.101.4.6.1.1.21 | INTEGER | read-only | Bit-mask representing which fans are fitted. Starting at the LSB, each bit set to '1' indicates a fitted fan. Knowledge of which fans ought to be fitted is assumed. (Chassis) |
| INT sleAdvaFanState | 1.3.6.1.4.1.6296.101.4.6.1.1.22 | INTEGER | read-only | Bit-mask representing the state of the fan. Starting at the LSB, each failed fan is indicated by a bit set to '1'. (Chassis) |
| INT sleAdvaTransmitMode | 1.3.6.1.4.1.6296.101.4.6.1.1.23 | INTEGER | read-only | Electrical Interface for remote instance 4 |
| sleAdvaSystemControl | 1.3.6.1.4.1.6296.101.4.6.2 | |||
| INT sleAdvaSystemControlRequest | 1.3.6.1.4.1.6296.101.4.6.2.1 | INTEGER | read-write | The MIB object for the user command.. |
| SLE sleAdvaSystemControlStatus | 1.3.6.1.4.1.6296.101.4.6.2.2 | SleControlStatusType | read-only | Describes the status of a user command group, used for block commands while a command execution in process. |
| G32 sleAdvaSystemControlTimer | 1.3.6.1.4.1.6296.101.4.6.2.3 | Gauge32 | read-write | Description. |
| TIK sleAdvaSystemControlTimeStamp | 1.3.6.1.4.1.6296.101.4.6.2.4 | TimeTicks | read-write | Description. |
| SLE sleAdvaSystemControlReqResult | 1.3.6.1.4.1.6296.101.4.6.2.5 | SleControlRequestResultType | read-write | Description. |
| INT sleAdvaSystemControlPortIndex | 1.3.6.1.4.1.6296.101.4.6.2.6 | INTEGER | read-write | Description. |
| INT sleAdvaSystemControlFSPOperationMode | 1.3.6.1.4.1.6296.101.4.6.2.7 | INTEGER | read-write | Description. |
| INT sleAdvaSystemControlForceNetworkInterface | 1.3.6.1.4.1.6296.101.4.6.2.8 | INTEGER | read-write | Description. |
| INT sleAdvaSystemControlReportingInterval | 1.3.6.1.4.1.6296.101.4.6.2.9 | INTEGER | read-write | Description. |
| INT sleAdvaSystemControlForceReset | 1.3.6.1.4.1.6296.101.4.6.2.10 | INTEGER | read-write | Description. |
| INT sleAdvaSystemControlMinRailVoltageThreshold | 1.3.6.1.4.1.6296.101.4.6.2.11 | INTEGER | read-write | Description. |
| INT sleAdvaSystemControlMaxRailVoltageThreshold | 1.3.6.1.4.1.6296.101.4.6.2.12 | INTEGER | read-write | Description. |
| INT sleAdvaSystemControlTemperatureThreshold | 1.3.6.1.4.1.6296.101.4.6.2.13 | INTEGER | read-write | Description. |
| INT sleAdvaSystemControlTransmitMode | 1.3.6.1.4.1.6296.101.4.6.2.14 | INTEGER | read-write | Description. |
| sleAdvaSystemNotification | 1.3.6.1.4.1.6296.101.4.6.3 | |||
| NTF sleAdvaSystemProfileChanged | 1.3.6.1.4.1.6296.101.4.6.3.1 | Description. | ||
| NTF sleAdvaAlarmProfileChanged | 1.3.6.1.4.1.6296.101.4.6.3.2 | Description. | ||
| NTF sleAdvaElectricalInterfaceChanged | 1.3.6.1.4.1.6296.101.4.6.3.3 | Description. | ||
| sleAdvaGeneral | 1.3.6.1.4.1.6296.101.4.7 | |||
| sleAdvaGeneralTable | 1.3.6.1.4.1.6296.101.4.7.1 | not-accessible | Description. | |
| sleAdvaGeneralEntry | 1.3.6.1.4.1.6296.101.4.7.1.1 | not-accessible | Description. | |
| INT sleAdvaRemInstance | 1.3.6.1.4.1.6296.101.4.7.1.1.1 | INTEGER | read-only | Description. |
| INT sleAdvaOperationalStatus | 1.3.6.1.4.1.6296.101.4.7.1.1.2 | INTEGER | read-only | encoding TBD. (General) |
| I32 sleAdvaLineSpeed | 1.3.6.1.4.1.6296.101.4.7.1.1.3 | Integer32 | read-only | Line speed in kbit/s. (General) |
| MAC sleAdvaMACAddress | 1.3.6.1.4.1.6296.101.4.7.1.1.4 | MacAddress | read-only | The Ethernet address of the interface. (General) |
| INT sleAdvaConnectorType | 1.3.6.1.4.1.6296.101.4.7.1.1.5 | INTEGER | read-only | encoding TBD. (General) |
| INT sleAdvaAutonegiotation | 1.3.6.1.4.1.6296.101.4.7.1.1.6 | INTEGER | read-only | Autonegiotation package - aAutoNegAdminState. (General)Enabled or disabled. |
| INT sleAdvaLinkLossForwarding | 1.3.6.1.4.1.6296.101.4.7.1.1.7 | INTEGER | read-only | When enabled access interface is brought down, when both network interfaces are down. (General) |
| INT sleAdvaAdminState | 1.3.6.1.4.1.6296.101.4.7.1.1.8 | INTEGER | read-only | Whether the interface is available. (General) |
| INT sleAdvaRemoteInterfaceIndex | 1.3.6.1.4.1.6296.101.4.7.1.1.9 | INTEGER | read-only | The index of the remote interface the interface is connected to. (General) |
| OCT sleAdvaUserDefinedString | 1.3.6.1.4.1.6296.101.4.7.1.1.10 | OCTET STRING | read-only | User definable string associated with interface. (General) |
| INT sleAdvaRemoteSignalling | 1.3.6.1.4.1.6296.101.4.7.1.1.11 | INTEGER | read-only | Autonegiotation package - aAutoNegRemoteSignalling. (AutoNego) |
| INT sleAdvaConfiguration | 1.3.6.1.4.1.6296.101.4.7.1.1.12 | INTEGER | read-only | Autonegiotation package - aAutoNegConfig. (AutoNego)Indicates whether Auto-Negotiation signaling is in progress or has completed. |
| BIT sleAdvaLocalTechnologyAbility | 1.3.6.1.4.1.6296.101.4.7.1.1.13 | Bits | read-only | Autonegiotation package - aAutoNegLocalTechnologyAbility. (AutoNego)This indicates the technology ability of the local device |
| BIT sleAdvaAdvertisedTechnologyAbility | 1.3.6.1.4.1.6296.101.4.7.1.1.14 | Bits | read-only | Autonegiotation package - aAutoNegAdvertisedTechnologyAbility. (AutoNego)The advertised technology ability of the local device. |
| BIT sleAdvaReceivedTechnologyAbility | 1.3.6.1.4.1.6296.101.4.7.1.1.15 | Bits | read-only | Autonegiotation package - aAutoNegReceivedTechnologyAbility. (AutoNego)Indicates the advertised technology ability of the remote hardware. |
| BIT sleAdvaLocalSectorAbility | 1.3.6.1.4.1.6296.101.4.7.1.1.16 | Bits | read-only | Autonegiotation package - aAutoNegLocalSectorAbility. (AutoNego) |
| BIT sleAdvaAdvertisedSectorAbility | 1.3.6.1.4.1.6296.101.4.7.1.1.17 | Bits | read-only | Autonegiotation package - aAutoNegLocalSectorAbility. (AutoNego) |
| BIT sleAdvaReceivedSectorAbility | 1.3.6.1.4.1.6296.101.4.7.1.1.18 | Bits | read-only | Autonegiotation package - aAutoNegLocalSectorAbility. (AutoNego) |
| INT sleAdvaDuplexCapabilities | 1.3.6.1.4.1.6296.101.4.7.1.1.19 | INTEGER | read-only | Mandatory package - aMacCapabilities. (PHY)The modes of duplex the access interface can support |
| INT sleAdvaPHYType | 1.3.6.1.4.1.6296.101.4.7.1.1.20 | INTEGER | read-only | Basic Package - aPhyType. (PHY) |
| BIT sleAdvaPHYTypeList | 1.3.6.1.4.1.6296.101.4.7.1.1.21 | Bits | read-only | Basic Package - aPhyTypeList. (PHY) |
| INT sleAdvaMIIDetect | 1.3.6.1.4.1.6296.101.4.7.1.1.22 | INTEGER | read-only | Basic Package - aMIIDetect. (PHY) |
| INT sleAdvaPHYState | 1.3.6.1.4.1.6296.101.4.7.1.1.23 | INTEGER | read-only | Description. |
| I32 sleAdvaGoodFramesTransmitted | 1.3.6.1.4.1.6296.101.4.7.1.1.24 | Integer32 | read-only | Mandatory package - aFramesTransmittedOK. (PHY)Non-resettable, wrapping count of good frames transmitted since OAM enabled. |
| I32 sleAdvaSingleCollisionFrames | 1.3.6.1.4.1.6296.101.4.7.1.1.25 | Integer32 | read-only | Mandatory package - aSingleCollisionFrames. (PHY)Non-resettable, wrapping count of single collisions since OAM enabled. |
| I32 sleAdvaMultipleCollisionFrames | 1.3.6.1.4.1.6296.101.4.7.1.1.26 | Integer32 | read-only | Mandatory package - aMultipleCollisionFrames. (PHY)Non-resettable, wrapping count of multiple collisions since OAM enabled. |
| I32 sleAdvaGoodFramesReceived | 1.3.6.1.4.1.6296.101.4.7.1.1.27 | Integer32 | read-only | Mandatory package - aFramesReceivedOKNon-resettable, wrapping count of good frames received since OAM enabled |
| I32 sleAdvaFCSErrors | 1.3.6.1.4.1.6296.101.4.7.1.1.28 | Integer32 | read-only | Mandatory package - aFrameCheckSequenceErrors. (PHY)Non-resettable, wrapping count of frames received with frame check sequence error since OAM enabled. |
| I32 sleAdvaAlignmentErrors | 1.3.6.1.4.1.6296.101.4.7.1.1.29 | Integer32 | read-only | Mandatory package - aAlignmentErrors. (PHY)Non-resettable, wrapping count of frames received with alignment error since OAM enabled. |
| I32 sleAdvaFramesTooLong | 1.3.6.1.4.1.6296.101.4.7.1.1.30 | Integer32 | read-only | aFrameTooLongErrors. (PHY)Non-resettable, wrapping count of frames received longer than maxFrameSize |
| I32 sleAdvaBytesTransmitted | 1.3.6.1.4.1.6296.101.4.7.1.1.31 | Integer32 | read-only | Non-resettable, wrapping count of bytes transmitted since OAM enabled. (PHY) |
| I32 sleAdvaBytesReceived | 1.3.6.1.4.1.6296.101.4.7.1.1.32 | Integer32 | read-only | Non-resettable, wrapping count of bytes received since OAM enabled. (PHY) |
| I32 sleAdvaSymbolErrors | 1.3.6.1.4.1.6296.101.4.7.1.1.33 | Integer32 | read-only | Non-resettable, wrapping count of symbol errors received. Note: some interfaces may only report one symbol error per frame. (PHY) |
| sleAdvaGeneralControl | 1.3.6.1.4.1.6296.101.4.7.2 | |||
| INT sleAdvaGeneralControlRequest | 1.3.6.1.4.1.6296.101.4.7.2.1 | INTEGER | read-write | Description. |
| SLE sleAdvaGeneralControlStatus | 1.3.6.1.4.1.6296.101.4.7.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleAdvaGeneralControlTimer | 1.3.6.1.4.1.6296.101.4.7.2.3 | Gauge32 | read-write | Description. |
| TIK sleAdvaGeneralControlTimeStamp | 1.3.6.1.4.1.6296.101.4.7.2.4 | TimeTicks | read-write | Description. |
| SLE sleAdvaGeneralControlReqResult | 1.3.6.1.4.1.6296.101.4.7.2.5 | SleControlRequestResultType | read-write | Description. |
| INT sleAdvaGeneralControlPortIndex | 1.3.6.1.4.1.6296.101.4.7.2.6 | INTEGER | read-write | Description. |
| INT sleAdvaGeneralControlRemInstance | 1.3.6.1.4.1.6296.101.4.7.2.7 | INTEGER | read-write | Description. |
| I32 sleAdvaGeneralControlLineSpeed | 1.3.6.1.4.1.6296.101.4.7.2.8 | Integer32 | read-write | Description. |
| INT sleAdvaGeneralControlAutonegiotation | 1.3.6.1.4.1.6296.101.4.7.2.9 | INTEGER | read-write | Description. |
| INT sleAdvaGeneralControlLinkLossForwarding | 1.3.6.1.4.1.6296.101.4.7.2.10 | INTEGER | read-write | Description. |
| OCT sleAdvaGeneralControlUserDefinedString | 1.3.6.1.4.1.6296.101.4.7.2.11 | OCTET STRING | read-write | Description. |
| BIT sleAdvaGeneralControlAdvertisedTechnologyAbility | 1.3.6.1.4.1.6296.101.4.7.2.12 | Bits | read-write | Description. |
| BIT sleAdvaGeneralControlAdvertisedSectorAbility | 1.3.6.1.4.1.6296.101.4.7.2.13 | Bits | read-write | Description. |
| sleAdvaGeneralNotification | 1.3.6.1.4.1.6296.101.4.7.3 | |||
| NTF sleAdvaGeneralProfileChanged | 1.3.6.1.4.1.6296.101.4.7.3.1 | Description. | ||
| NTF sleAdvaAutonegProfileChanged | 1.3.6.1.4.1.6296.101.4.7.3.2 | Description. | ||
| sleAdvaModule | 1.3.6.1.4.1.6296.101.4.8 | |||
| sleAdvaModuleTable | 1.3.6.1.4.1.6296.101.4.8.1 | not-accessible | Description. | |
| sleAdvaModuleEntry | 1.3.6.1.4.1.6296.101.4.8.1.1 | not-accessible | Description. | |
| INT sleAdvaModuleType | 1.3.6.1.4.1.6296.101.4.8.1.1.1 | INTEGER | read-only | encoding TBD |
| OCT sleAdvaModulePartNumber | 1.3.6.1.4.1.6296.101.4.8.1.1.2 | OCTET STRING | read-only | Part number for the module |
| OCT sleAdvaModuleSerialNumber | 1.3.6.1.4.1.6296.101.4.8.1.1.3 | OCTET STRING | read-only | Serial number for the module |
| OCT sleAdvaModuleFirmwareVersion | 1.3.6.1.4.1.6296.101.4.8.1.1.4 | OCTET STRING | read-only | Firmware version for the module. |
| OCT sleAdvaModuleSoftwareVersion | 1.3.6.1.4.1.6296.101.4.8.1.1.5 | OCTET STRING | read-only | Software version for the module |
| OCT sleAdvaModuleHardwareRevision | 1.3.6.1.4.1.6296.101.4.8.1.1.6 | OCTET STRING | read-only | Hardware revision for the module. |
| OCT sleAdvaModuleCLEICode | 1.3.6.1.4.1.6296.101.4.8.1.1.7 | OCTET STRING | read-only | CLEI for the module. |
| sleAdvaOptical | 1.3.6.1.4.1.6296.101.4.9 | |||
| sleAdvaOpticalTable | 1.3.6.1.4.1.6296.101.4.9.1 | not-accessible | Description. | |
| sleAdvaOpticalEntry | 1.3.6.1.4.1.6296.101.4.9.1.1 | not-accessible | Description. | |
| INT sleAdvaOpticalThresholdLevel | 1.3.6.1.4.1.6296.101.4.9.1.1.1 | INTEGER | read-only | Threshold for the receive power level in dBm below which the Interface optical threshold alarm will be activated.Per interface. |
| INT sleAdvaLinkLength1 | 1.3.6.1.4.1.6296.101.4.9.1.1.2 | INTEGER | read-only | Link length supported for 9/125 mm fiber, units of km |
| INT sleAdvaLinkLength2 | 1.3.6.1.4.1.6296.101.4.9.1.1.3 | INTEGER | read-only | Link length supported for 9/125 mm fiber, units of 100 m |
| INT sleAdvaLinkLength3 | 1.3.6.1.4.1.6296.101.4.9.1.1.4 | INTEGER | read-only | Link length supported for 50/125 mm fiber, units of 10 m |
| INT sleAdvaLinkLength4 | 1.3.6.1.4.1.6296.101.4.9.1.1.5 | INTEGER | read-only | Link length supported for 62.5/125 mm fiber, units of 10 m |
| INT sleAdvaLinkLengthCu | 1.3.6.1.4.1.6296.101.4.9.1.1.6 | INTEGER | read-only | Link length supported for copper, units of meters |
| INT sleAdvaWaveLength | 1.3.6.1.4.1.6296.101.4.9.1.1.7 | INTEGER | read-only | Nominal wavelength in nm |
| INT sleAdvaLaserBias | 1.3.6.1.4.1.6296.101.4.9.1.1.8 | INTEGER | read-only | Current laser bias current in mA. |
| INT sleAdvaTransmitPower | 1.3.6.1.4.1.6296.101.4.9.1.1.9 | INTEGER | read-only | Current transmit power in dBm as reported by optics. |
| INT sleAdvaReceivePower | 1.3.6.1.4.1.6296.101.4.9.1.1.10 | INTEGER | read-only | Current receive power in dBm as reported by optics. |
| INT sleAdvaLaserTxTemperature | 1.3.6.1.4.1.6296.101.4.9.1.1.11 | INTEGER | read-only | Current temperature of laser in degrees C. |
| sleAdvaOpticalControl | 1.3.6.1.4.1.6296.101.4.9.2 | |||
| INT sleAdvaOpticalControlRequest | 1.3.6.1.4.1.6296.101.4.9.2.1 | INTEGER | read-write | Description. |
| SLE sleAdvaOpticalControlStatus | 1.3.6.1.4.1.6296.101.4.9.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleAdvaOpticalControlTimer | 1.3.6.1.4.1.6296.101.4.9.2.3 | Gauge32 | read-write | Description. |
| TIK sleAdvaOpticalControlTimeStamp | 1.3.6.1.4.1.6296.101.4.9.2.4 | TimeTicks | read-write | Description. |
| SLE sleAdvaOpticalControlReqResult | 1.3.6.1.4.1.6296.101.4.9.2.5 | SleControlRequestResultType | read-write | Description. |
| INT sleAdvaOpticalControlPortIndex | 1.3.6.1.4.1.6296.101.4.9.2.6 | INTEGER | read-write | Description. |
| INT sleAdvaOpticalControlRemInstance | 1.3.6.1.4.1.6296.101.4.9.2.7 | INTEGER | read-write | Description. |
| INT sleAdvaOpticalControlThresholdLevel | 1.3.6.1.4.1.6296.101.4.9.2.8 | INTEGER | read-write | Description. |
| sleAdvaOpticalNotification | 1.3.6.1.4.1.6296.101.4.9.3 | |||
| NTF sleAdvaOpticalAlarmChanged | 1.3.6.1.4.1.6296.101.4.9.3.1 | Description. | ||
| sleAdvaOam | 1.3.6.1.4.1.6296.101.4.10 | |||
| sleAdvaOamTable | 1.3.6.1.4.1.6296.101.4.10.1 | not-accessible | Description. | |
| sleAdvaOamEntry | 1.3.6.1.4.1.6296.101.4.10.1.1 | not-accessible | Description. | |
| INT sleAdvaAdminStatus | 1.3.6.1.4.1.6296.101.4.10.1.1.1 | INTEGER | read-only | OAM package - aOAMAdminState (Configuration)Whether the OAM sublayer is enabled or disabled. |
| INT sleAdvaMode | 1.3.6.1.4.1.6296.101.4.10.1.1.2 | INTEGER | read-only | OAM package - aOAMMode. (Configuration)Mode of the OAM client |
| OCT sleAdvaRemMACAddress | 1.3.6.1.4.1.6296.101.4.10.1.1.3 | OCTET STRING | read-only | OAM package - aOAMRemoteMACAddress. (Configuration) |
| BIT sleAdvaRemConfig | 1.3.6.1.4.1.6296.101.4.10.1.1.4 | Bits | read-only | OAM package - aOAMRemoteConfiguration. (Configuration)Bit-mask corresponding to the OAM configuration field: |
| INT sleAdvaRemPduConfig | 1.3.6.1.4.1.6296.101.4.10.1.1.5 | INTEGER | read-only | OAM package - aOAMRemotePDUConfiguration. (Configuration)The maximum PDU size supported |
| BIT sleAdvaLocFlags | 1.3.6.1.4.1.6296.101.4.10.1.1.6 | Bits | read-only | OAM package - aOAMLocalFlags. (Configuration)Bit-mask corresponding to the OAM flag field transmitted: |
| BIT sleAdvaRemFlags | 1.3.6.1.4.1.6296.101.4.10.1.1.7 | Bits | read-only | OAM package - aOAMRemoteFlags. (Configuration)Bit-mask corresponding to the OAM flag field received |
| BIT sleAdvaRemState | 1.3.6.1.4.1.6296.101.4.10.1.1.8 | Bits | read-only | OAM package - aOAMRemoteState. (Configuration)Bit-mask corresponding to the OAM State field received |
| INT sleAdvaRemVendorOUI | 1.3.6.1.4.1.6296.101.4.10.1.1.9 | INTEGER | read-only | OAM package - aOAMRemoteVendorOUI. (Configuration)The value of the OUI from the remote end of the OAM link. |
| INT sleAdvaRemDeviceNumber | 1.3.6.1.4.1.6296.101.4.10.1.1.10 | INTEGER | read-only | OAM package - aOAMRemoteVendorIdDeviceNumber. (Configuration) The value of the Device Identifier from the remote end of the OAM link. |
| INT sleAdvaRemVendorVersion | 1.3.6.1.4.1.6296.101.4.10.1.1.11 | INTEGER | read-only | OAM package - aOAMRemoteVendorIdVersion. (Configuration) The value of the Version Identifier from the remote end of the OAM link. |
| INT sleAdvaLocErrSymbolPeriodEventConfig | 1.3.6.1.4.1.6296.101.4.10.1.1.12 | INTEGER | read-only | OAM package - aOAMLocalErrSymPeriodConfig. (Configuration) Configuration for the event indicating the duration of the period and the number of symbols that must be exceeded. |
| INT sleAdvaLocErrFrameEventConfig | 1.3.6.1.4.1.6296.101.4.10.1.1.13 | INTEGER | read-only | OAM package - aOAMLocalErrFrameConfig. (Configuration) Configuration for the event indicating the duration and the number of errored frames that must be exceeded. |
| INT sleAdvaLocErrFramePeriodEventConfig | 1.3.6.1.4.1.6296.101.4.10.1.1.14 | INTEGER | read-only | OAM package - aOAMLocalErrFramePeriodConfig. (Configuration) Configuration for the event indicating the durationin terms of minFrameSize that can be transmitted and that number of errored frames that must be exceeded. |
| INT sleAdvaLocErrFrameSecsSummaryEventConfig | 1.3.6.1.4.1.6296.101.4.10.1.1.15 | INTEGER | read-only | OAM package - aOAMLocalErrFrameSecsSummaryConfig. (Configuration) Configuration for the evert indicating duration window and number of errored frame seconds in that duration that must be exceeded. |
| I32 sleAdvaPDUsTx | 1.3.6.1.4.1.6296.101.4.10.1.1.16 | Integer32 | read-only | OAM package - aOAMPDUTx. (PDU Performance)Non-resettable, wrapping count of OAM PDUs transmitted since OAM enabled. |
| I32 sleAdvaPDUsRx | 1.3.6.1.4.1.6296.101.4.10.1.1.17 | Integer32 | read-only | OAM package - aOAMPDURx. (PDU Performance)Non-resettable, wrapping count of OAM PDUs received since OAM enabled. |
| I32 sleAdvaUnsupportedCodesRx | 1.3.6.1.4.1.6296.101.4.10.1.1.18 | Integer32 | read-only | OAM package - aOAMUnsupportedCodesRx. (PDU Performance)Non-resettable, wrapping count of OAM PDUs received that are not supported by device since OAM enabled. |
| I32 sleAdvaInfoPDUsTx | 1.3.6.1.4.1.6296.101.4.10.1.1.19 | Integer32 | read-only | OAM package - aOAMInformationTx. (PDU Performance)Non-resettable, wrapping count of OAM Info PDUs transmitted since OAM enabled. |
| I32 sleAdvaInfoPDUsRx | 1.3.6.1.4.1.6296.101.4.10.1.1.20 | Integer32 | read-only | OAM package - aOAMInformationRx. (PDU Performance)Non-resettable, wrapping count of OAM Info PDUs received since OAM enabled. |
| I32 sleAdvaEventNotificationPDUsTx | 1.3.6.1.4.1.6296.101.4.10.1.1.21 | Integer32 | read-only | OAM package - aOAMEventNotificationTx. (PDU Performance)Non-resettable, wrapping count of OAM Event PDUs transmitted since OAM enabled. |
| I32 sleAdvaUniqueEventNotificationPDUsTx | 1.3.6.1.4.1.6296.101.4.10.1.1.22 | Integer32 | read-only | OAM package - aOAMUniqueEventNotificationTx. (PDU Performance) Non-resettable, wrapping count of OAM Event PDUs received with a different sequence number than previously since OAM enabled. |
| I32 sleAdvaDupEventNotificationPDUsTx | 1.3.6.1.4.1.6296.101.4.10.1.1.23 | Integer32 | read-only | OAM package - aOAMDuplicateEventNotificationTx. (PDU Performance) Non-resettable, wrapping count of OAM Event PDUs received with the same sequence number as previously since OAM enabled. |
| I32 sleAdvaLoopbackControlPDUsTx | 1.3.6.1.4.1.6296.101.4.10.1.1.24 | Integer32 | read-only | OAM package - aOAMLoopbackControlTx. (PDU Performance) Non-resettable, wrapping count of OAM Loopback Control PDUs transmitted since OAM enabled. |
| I32 sleAdvaLoopbackControlPDUsRx | 1.3.6.1.4.1.6296.101.4.10.1.1.25 | Integer32 | read-only | OAM package - aOAMLoopbackControlRx. (PDU Performance) Non-resettable, wrapping count of OAM Loopback Control PDUs received since OAM enabled. |
| I32 sleAdvaVariableRequestPDUsTx | 1.3.6.1.4.1.6296.101.4.10.1.1.26 | Integer32 | read-only | OAM package - aOAMVariableRequestTx. (PDU Performance) Non-resettable, wrapping count of OAM Variable Request PDUs transmitted since OAM enabled. |
| I32 sleAdvaVariableRequestPDUsRx | 1.3.6.1.4.1.6296.101.4.10.1.1.27 | Integer32 | read-only | OAM package - aOAMVariableRequestRx. (PDU Performance) Non-resettable, wrapping count of OAM Variable Request PDUs received since OAM enabled. |
| I32 sleAdvaVariableResponsePDUsTx | 1.3.6.1.4.1.6296.101.4.10.1.1.28 | Integer32 | read-only | OAM package - aOAMVariableResponseTx. (PDU Performance) Non-resettable, wrapping count of OAM Variable Response PDUs transmitted since OAM enabled. |
| I32 sleAdvaVariableResponsePDUsRx | 1.3.6.1.4.1.6296.101.4.10.1.1.29 | Integer32 | read-only | OAM package - aOAMVariableResponseRx. (PDU Performance) Non-resettable, wrapping count of OAM Variable Response PDUs received since OAM enabled |
| I32 sleAdvaVendorPDUsTx | 1.3.6.1.4.1.6296.101.4.10.1.1.30 | Integer32 | read-only | OAM package - aOAMOrganizationSpecificTx . (PDU Performance) Non-resettable, wrapping count of OAM Vendor PDUs transmitted since OAM enabled. |
| I32 sleAdvaVendorPDUsRx | 1.3.6.1.4.1.6296.101.4.10.1.1.31 | Integer32 | read-only | OAM package - aOAMOrganizationSpecificRx. (PDU Performance) |
| I32 sleAdvaRemFramesLostDuetoOAMErr | 1.3.6.1.4.1.6296.101.4.10.1.1.32 | Integer32 | read-only | OAM package - aFramesLostDueToOAMError. (PDU Performance) Non-resettable, wrapping count of frames that would have been transmitted but for an OAM sublayer error. |
| I32 sleAdvaLocErrSymbolPeriodEvent | 1.3.6.1.4.1.6296.101.4.10.1.1.33 | Integer32 | read-only | The most recently transmitted event of this type. (Error) |
| I32 sleAdvaLocErrFrameSecsEvent | 1.3.6.1.4.1.6296.101.4.10.1.1.34 | Integer32 | read-only | The most recently transmitted event of this type. (Error) |
| I32 sleAdvaLocErrFramePeriodEvent | 1.3.6.1.4.1.6296.101.4.10.1.1.35 | Integer32 | read-only | The most recently transmitted event of this type. (Error) |
| I32 sleAdvaLocErrFrameSecsSummaryEvent | 1.3.6.1.4.1.6296.101.4.10.1.1.36 | Integer32 | read-only | The most recently transmitted event of this type. (Error) |
| I32 sleAdvaRemErrSymbolPeriodEvent | 1.3.6.1.4.1.6296.101.4.10.1.1.37 | Integer32 | read-only | The most recently received event of this type. (Error) |
| I32 sleAdvaRemErrFrameSecsEvent | 1.3.6.1.4.1.6296.101.4.10.1.1.38 | Integer32 | read-only | The most recently received event of this type. (Error) |
| I32 sleAdvaRemoteErrorFramePeriodEvent | 1.3.6.1.4.1.6296.101.4.10.1.1.39 | Integer32 | read-only | The most recently received event of this type. (Error) |
| I32 sleAdvaRemoteErrorFrameSecsSummaryEvent | 1.3.6.1.4.1.6296.101.4.10.1.1.40 | Integer32 | read-only | The most recently received event of this type. (Error) |
| sleAdvaOamControl | 1.3.6.1.4.1.6296.101.4.10.2 | |||
| INT sleAdvaOamControlRequest | 1.3.6.1.4.1.6296.101.4.10.2.1 | INTEGER | read-write | Description. |
| SLE sleAdvaOamControlStatus | 1.3.6.1.4.1.6296.101.4.10.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleAdvaOamControlTimer | 1.3.6.1.4.1.6296.101.4.10.2.3 | Gauge32 | read-write | Description. |
| TIK sleAdvaOamControlTimeStamp | 1.3.6.1.4.1.6296.101.4.10.2.4 | TimeTicks | read-write | Description. |
| SLE sleAdvaOamControlReqResult | 1.3.6.1.4.1.6296.101.4.10.2.5 | SleControlRequestResultType | read-write | Description. |
| INT sleAdvaOamControlPortIndex | 1.3.6.1.4.1.6296.101.4.10.2.6 | INTEGER | read-write | Description. |
| INT sleAdvaOamControlRemInstance | 1.3.6.1.4.1.6296.101.4.10.2.7 | INTEGER | read-write | Description. |
| INT sleAdvaOamControlAdminStatus | 1.3.6.1.4.1.6296.101.4.10.2.8 | INTEGER | read-write | Description. |
| INT sleAdvaOamControlMode | 1.3.6.1.4.1.6296.101.4.10.2.9 | INTEGER | read-write | Description. |
| sleAdvaOamNotification | 1.3.6.1.4.1.6296.101.4.10.3 | |||
| NTF setAdvaOamProfileChanged | 1.3.6.1.4.1.6296.101.4.10.3.1 | Description. | ||
| sleAlarmLED | 1.3.6.1.4.1.6296.101.4.11 | |||
| sleAlarmLEDTable | 1.3.6.1.4.1.6296.101.4.11.1 | not-accessible | Description. | |
| sleAlarmLEDEntry | 1.3.6.1.4.1.6296.101.4.11.1.1 | not-accessible | Description. | |
| INT sleAlarmLEDType | 1.3.6.1.4.1.6296.101.4.11.1.1.1 | INTEGER | read-only | The alarm that LED indicate. |
| INT sleAlarmLEDStatus | 1.3.6.1.4.1.6296.101.4.11.1.1.2 | INTEGER | read-only | The status of alarm LED. |
| INT sleAlarmLEDLevel | 1.3.6.1.4.1.6296.101.4.11.1.1.3 | INTEGER | read-only | The Level of alarm LED. |
| sleAlarmLEDLevelTable | 1.3.6.1.4.1.6296.101.4.11.2 | not-accessible | Description. | |
| sleAlarmLEDLevelEntry | 1.3.6.1.4.1.6296.101.4.11.2.1 | not-accessible | Description. | |
| INT sleAlarmLEDLevelIndex | 1.3.6.1.4.1.6296.101.4.11.2.1.1 | INTEGER | read-only | LED level index. |
| INT sleAlarmLEDLevelBlock | 1.3.6.1.4.1.6296.101.4.11.2.1.2 | INTEGER | read-only | LED level block. |
| INT sleAlarmLEDLevelOperStatus | 1.3.6.1.4.1.6296.101.4.11.2.1.3 | INTEGER | read-only | Alarm current operation status. |
| sleAlarmLEDControl | 1.3.6.1.4.1.6296.101.4.11.3 | |||
| INT sleAlarmLEDControlRequest | 1.3.6.1.4.1.6296.101.4.11.3.1 | INTEGER | read-write | Description. |
| SLE sleAlarmLEDControlStatus | 1.3.6.1.4.1.6296.101.4.11.3.2 | SleControlStatusType | read-only | Description. |
| G32 sleAlarmLEDControlTimer | 1.3.6.1.4.1.6296.101.4.11.3.3 | Gauge32 | read-write | Description. |
| TIK sleAlarmLEDControlTimeStamp | 1.3.6.1.4.1.6296.101.4.11.3.4 | TimeTicks | read-only | Description. |
| SLE sleAlarmLEDControlReqResult | 1.3.6.1.4.1.6296.101.4.11.3.5 | SleControlRequestResultType | read-only | Description. |
| INT sleAlarmLEDControlType | 1.3.6.1.4.1.6296.101.4.11.3.6 | INTEGER | read-write | The alarm that LED indicate. |
| INT sleAlarmLEDControlLevel | 1.3.6.1.4.1.6296.101.4.11.3.7 | INTEGER | read-write | The Level of alarm LED. |
| INT sleAlarmLEDControlBlock | 1.3.6.1.4.1.6296.101.4.11.3.8 | INTEGER | read-write | LED level block. |
| sleAlarmLEDNotification | 1.3.6.1.4.1.6296.101.4.11.4 | |||
| NTF sleAlarmLEDOffChanged | 1.3.6.1.4.1.6296.101.4.11.4.1 | Description. | ||
| NTF sleAlarmLEDLevelChanged | 1.3.6.1.4.1.6296.101.4.11.4.2 | Description. | ||
| NTF sleAlarmLEDCleared | 1.3.6.1.4.1.6296.101.4.11.4.3 | Description. | ||
| NTF sleAlarmLEDBlockChanged | 1.3.6.1.4.1.6296.101.4.11.4.4 | Description. | ||
| sleY1731Oam | 1.3.6.1.4.1.6296.101.4.12 | |||
| sleY1731Base | 1.3.6.1.4.1.6296.101.4.12.1 | |||
| sleY1731BaseGroup | 1.3.6.1.4.1.6296.101.4.12.1.1 | |||
| INT sleY1731Enable | 1.3.6.1.4.1.6296.101.4.12.1.1.1 | INTEGER | read-only | Enables/Ddisables ITU-T Y.1731 OAM function |
| INT sleY1731TrunkEnable | 1.3.6.1.4.1.6296.101.4.12.1.1.2 | INTEGER | read-only | Enables/Disables Y.1731 OAM on a trunk port |
| I32 sleY1731LtrCacheHoldTime | 1.3.6.1.4.1.6296.101.4.12.1.1.3 | Integer32 | read-only | Indicates the time that cache entries will be retained |
| I32 sleY1731LtrCacheSize | 1.3.6.1.4.1.6296.101.4.12.1.1.4 | Integer32 | read-only | Indicates the number of entries in the traceroute cache |
| BIT sleY1731SnmpServerTraps | 1.3.6.1.4.1.6296.101.4.12.1.1.5 | Bits | read-only | Indicates the SNMP traps |
| I32 sleY1731XcheckStartDelay | 1.3.6.1.4.1.6296.101.4.12.1.1.6 | Integer32 | read-only | Indicates the delay before the cross-check is started |
| I32 sleY1731DefaultMegLevel | 1.3.6.1.4.1.6296.101.4.12.1.1.7 | Integer32 | read-only | Indicates the level to be created dynamic MHF |
| INT sleY1731DefaultMegMhfCreation | 1.3.6.1.4.1.6296.101.4.12.1.1.8 | INTEGER | read-only | Indicates the mode of MHF creation |
| INT sleY1731PduToCfm | 1.3.6.1.4.1.6296.101.4.12.1.1.9 | INTEGER | read-only | Enables/Disables changing from Y.1731 PDU format to CFM PDU format |
| INT sleY1731DedicatedVlan | 1.3.6.1.4.1.6296.101.4.12.1.1.10 | INTEGER | read-write | Description. |
| INT sleY1731RmepCreation | 1.3.6.1.4.1.6296.101.4.12.1.1.11 | INTEGER | read-only | RMEP creation mode |
| INT sleY1731CCIgnoreDefect | 1.3.6.1.4.1.6296.101.4.12.1.1.12 | INTEGER | read-only | CC Ignore Defect Mode |
| INT sleY1731RapsFloodingBlock | 1.3.6.1.4.1.6296.101.4.12.1.1.13 | INTEGER | read-only | R-APS Flooding Block Mode |
| INT sleY1731TlvPermission | 1.3.6.1.4.1.6296.101.4.12.1.1.14 | INTEGER | read-only | Indicates TLV Permission |
| sleY1731BaseControl | 1.3.6.1.4.1.6296.101.4.12.1.2 | |||
| INT sleY1731BaseControlRequest | 1.3.6.1.4.1.6296.101.4.12.1.2.1 | INTEGER | read-write | This attribute identifies the control commands. updateAlarmList: the NE updates entries of alarms in the sleAlarmListTable after having changed alarm severities of alarms (due to change profile pointers in managed entities or after modification of alarm severities in profiles). This command should be applied once after having finisled modifications of severties. modifyAlarmSeverity: modifies the severity of an alarm in specific profile. createAlarmSeverityProfile: creates a new profile with default severities. The severities then have to be modified with command changeAlarmSeverity. deleteAlarmSeverityProfile: deletes a profile. Profile 1 is not allowed to be deleted. Notifications : none |
| SLE sleY1731BaseControlStatus | 1.3.6.1.4.1.6296.101.4.12.1.2.2 | SleControlStatusType | read-only | The status of a control request. |
| G32 sleY1731BaseControlTimer | 1.3.6.1.4.1.6296.101.4.12.1.2.3 | Gauge32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleY1731BaseControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.1.2.4 | TimeTicks | read-only | The time stamp of the last command (end of command). |
| SLE sleY1731BaseControlReqResult | 1.3.6.1.4.1.6296.101.4.12.1.2.5 | SleControlRequestResultType | read-only | The result of the last user command. |
| INT sleY1731BaseControlEnable | 1.3.6.1.4.1.6296.101.4.12.1.2.6 | INTEGER | read-write | Enables/Ddisables ITU-T Y.1731 OAM function |
| INT sleY1731BaseControlTrunkEnable | 1.3.6.1.4.1.6296.101.4.12.1.2.7 | INTEGER | read-write | Enables/Disables Y.1731 OAM on a trunk port |
| I32 sleY1731BaseControlLtrCacheHoldTime | 1.3.6.1.4.1.6296.101.4.12.1.2.8 | Integer32 | read-write | Indicates the time that cache entries will be retained |
| I32 sleY1731BaseControlLtrCacheSize | 1.3.6.1.4.1.6296.101.4.12.1.2.9 | Integer32 | read-write | Indicates the number of entries in the traceroute cache |
| BIT sleY1731BaseControlSnmpServerTraps | 1.3.6.1.4.1.6296.101.4.12.1.2.10 | Bits | read-write | Indicates the SNMP traps |
| I32 sleY1731BaseControlXcheckStartDelay | 1.3.6.1.4.1.6296.101.4.12.1.2.11 | Integer32 | read-write | Indicates the delay before the cross-check is started |
| I32 sleY1731BaseControlDefaultMegLevel | 1.3.6.1.4.1.6296.101.4.12.1.2.12 | Integer32 | read-write | Indicates the level to be created dynamic MHF |
| INT sleY1731BaseControlDefaultMegMhfCreation | 1.3.6.1.4.1.6296.101.4.12.1.2.13 | INTEGER | read-write | Indicates the mode of MHF creation |
| INT sleY1731BaseControlPduToCfm | 1.3.6.1.4.1.6296.101.4.12.1.2.14 | INTEGER | read-write | Description. |
| INT sleY1731BaseControlDedicatedVlan | 1.3.6.1.4.1.6296.101.4.12.1.2.15 | INTEGER | read-write | Description. |
| INT sleY1731BaseControlRmepCreation | 1.3.6.1.4.1.6296.101.4.12.1.2.16 | INTEGER | read-write | RMEP creation mode |
| INT sleY1731BaseControlTrunkIndex | 1.3.6.1.4.1.6296.101.4.12.1.2.17 | INTEGER | read-write | Trunk Index |
| INT sleY1731BaseControlTrunkOamStatus | 1.3.6.1.4.1.6296.101.4.12.1.2.18 | INTEGER | read-write | OAM status per each Trunk port. |
| OCT sleY1731BaseControlTrunkMeg | 1.3.6.1.4.1.6296.101.4.12.1.2.19 | OCTET STRING | read-write | trunk port meg name. |
| INT sleY1731BaseControlCCIgnoreDefect | 1.3.6.1.4.1.6296.101.4.12.1.2.20 | INTEGER | read-write | CC Ignore Defect Mode |
| INT sleY1731BaseControlRapsFloodingBlock | 1.3.6.1.4.1.6296.101.4.12.1.2.21 | INTEGER | read-write | R-APS Flooding Block Mode |
| INT sleY1731BaseControlTlvPermission | 1.3.6.1.4.1.6296.101.4.12.1.2.22 | INTEGER | read-write | Indicates TLV Permission |
| sleY1731BaseNotification | 1.3.6.1.4.1.6296.101.4.12.1.3 | |||
| NTF sleY1731EnableChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.1 | setY1731Enable | ||
| NTF sleY1731TrunkEnableChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.2 | setY1731TrunkEnable | ||
| NTF sleY1731LtrCacheProfileChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.3 | setY1731LtrCacheProfile | ||
| NTF sleY1731SnmpProfileChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.4 | setY1731SnmpProfile | ||
| NTF sleY1731XcheckProfileChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.5 | setY1731XcheckProfile | ||
| NTF sleY1731DefaultMegProfileChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.6 | setY1731DefaultMegProfile | ||
| NTF sleY1731PduToCfmChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.7 | Description. | ||
| NTF sleY1731DedicatedVlanChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.8 | Description. | ||
| NTF sleY1731MipCcdbDestroyed | 1.3.6.1.4.1.6296.101.4.12.1.3.9 | destroyMipCcdb | ||
| NTF sleY1731LtrCacheDestroyed | 1.3.6.1.4.1.6296.101.4.12.1.3.10 | destroyLtrCache | ||
| NTF sleY1731RmepCreationChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.11 | sleY1731BaseControlRmepCreation | ||
| NTF sleY1731TrunkOamStatusChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.12 | sleY1731BaseControlTrunkIndex sleY1731BaseControlTrunkOamStatus | ||
| NTF sleY1731CCIgnoreDefectChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.13 | sleY1731BaseControlCCIgnoreDefect | ||
| NTF sleY1731RapsFloodinBlockChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.14 | sleY1731BaseControlCCIgnoreDefect | ||
| NTF sleY1731TlvPermissionChanged | 1.3.6.1.4.1.6296.101.4.12.1.3.15 | setY1731TlvPermission | ||
| sleY1731TrunkTable | 1.3.6.1.4.1.6296.101.4.12.1.4 | not-accessible | Description. | |
| sleY1731TrunkEntry | 1.3.6.1.4.1.6296.101.4.12.1.4.1 | not-accessible | Description. | |
| INT sleY1731TrunkIndex | 1.3.6.1.4.1.6296.101.4.12.1.4.1.1 | INTEGER | read-only | trunk port index. |
| INT sleY1731TrunkOamStatus | 1.3.6.1.4.1.6296.101.4.12.1.4.1.2 | INTEGER | read-only | OAM status per each Trunk port. |
| OCT sleY1731TrunkMeg | 1.3.6.1.4.1.6296.101.4.12.1.4.1.3 | OCTET STRING | read-only | trunk port meg name. |
| sleY1731Meg | 1.3.6.1.4.1.6296.101.4.12.2 | |||
| sleY1731MegTable | 1.3.6.1.4.1.6296.101.4.12.2.1 | not-accessible | Description. | |
| sleY1731MegEntry | 1.3.6.1.4.1.6296.101.4.12.2.1.1 | not-accessible | Description. | |
| I32 sleY1731MegIndex | 1.3.6.1.4.1.6296.101.4.12.2.1.1.1 | Integer32 | read-only | Indicates the MEG's Index |
| OCT sleY1731MegName | 1.3.6.1.4.1.6296.101.4.12.2.1.1.2 | OCTET STRING | read-only | The MEG's name: ICC (6 bytes) + UMC (6 bytes) |
| I32 sleY1731MegLevel | 1.3.6.1.4.1.6296.101.4.12.2.1.1.3 | Integer32 | read-only | Indicates the MEG's level |
| I32 sleY1731MegVid | 1.3.6.1.4.1.6296.101.4.12.2.1.1.4 | Integer32 | read-only | Indicates the MEG's VID |
| INT sleY1731MegMepEnable | 1.3.6.1.4.1.6296.101.4.12.2.1.1.5 | INTEGER | read-only | Enables/Disables Y.1731 OAM for MEPs |
| INT sleY1731MegCcEnable | 1.3.6.1.4.1.6296.101.4.12.2.1.1.6 | INTEGER | read-only | Enables/Disables MEPs to send Continuity Check messages |
| I32 sleY1731MegCcInterval | 1.3.6.1.4.1.6296.101.4.12.2.1.1.7 | Integer32 | read-only | Indicates the interval between CCM transmissions |
| I32 sleY1731MegCcPriority | 1.3.6.1.4.1.6296.101.4.12.2.1.1.8 | Integer32 | read-only | Indicates the CCM or LTM Message Priority |
| I32 sleY1731MegCcLossThreshold | 1.3.6.1.4.1.6296.101.4.12.2.1.1.9 | Integer32 | read-only | Indicates the minimum number of CCMs that can be missed before declaring that a MEP is down |
| I32 sleY1731MegCcHoldTime | 1.3.6.1.4.1.6296.101.4.12.2.1.1.10 | Integer32 | read-only | Indicates the time that data of a missing MEP is kept |
| I32 sleY1731MegFaultPriority | 1.3.6.1.4.1.6296.101.4.12.2.1.1.11 | Integer32 | read-only | Indicates the lowest priority for fault alarm |
| I32 sleY1731MegFaultKeepTime | 1.3.6.1.4.1.6296.101.4.12.2.1.1.12 | Integer32 | read-only | Indicates the keep time for the fault alarm |
| I32 sleY1731MegFaultClearTime | 1.3.6.1.4.1.6296.101.4.12.2.1.1.13 | Integer32 | read-only | Indicates the clear time for the fault alarm |
| INT sleY1731MegXcheckEnable | 1.3.6.1.4.1.6296.101.4.12.2.1.1.14 | INTEGER | read-only | Enables/Disables Y.1731 cross-check for a specific MEG |
| INT sleY1731MegAisEnable | 1.3.6.1.4.1.6296.101.4.12.2.1.1.15 | INTEGER | read-only | Enables/Disables ETH-AIS function |
| INT sleY1731MegAisTransmitEnable | 1.3.6.1.4.1.6296.101.4.12.2.1.1.16 | INTEGER | read-only | Enables/Disables ETH-AIS frame transmission on a MEP |
| INT sleY1731MegAisInterval | 1.3.6.1.4.1.6296.101.4.12.2.1.1.17 | INTEGER | read-only | Indicates the interval between AIS transmissions |
| I32 sleY1731MegAisLevel | 1.3.6.1.4.1.6296.101.4.12.2.1.1.18 | Integer32 | read-only | Indicates the client MEG's level |
| I32 sleY1731MegAisPriority | 1.3.6.1.4.1.6296.101.4.12.2.1.1.19 | Integer32 | read-only | Indicates the AIS Message Priority |
| INT sleY1731MegLckEnable | 1.3.6.1.4.1.6296.101.4.12.2.1.1.20 | INTEGER | read-only | Enables/Disables ETH-LCK function |
| INT sleY1731MegLckTransmitEnable | 1.3.6.1.4.1.6296.101.4.12.2.1.1.21 | INTEGER | read-only | Enables/Disables ETH-LCK frame transmission on a MEP |
| INT sleY1731MegLckInterval | 1.3.6.1.4.1.6296.101.4.12.2.1.1.22 | INTEGER | read-only | Indicates the interval between LCK transmissions |
| I32 sleY1731MegLckLevel | 1.3.6.1.4.1.6296.101.4.12.2.1.1.23 | Integer32 | read-only | Indicates the client MEG's level |
| I32 sleY1731MegLckPriority | 1.3.6.1.4.1.6296.101.4.12.2.1.1.24 | Integer32 | read-only | Indicates the LCK Message Priority |
| INT sleY1731MegOutOfService | 1.3.6.1.4.1.6296.101.4.12.2.1.1.25 | INTEGER | read-only | Indicates the out-of-service mode |
| INT sleY1731MegRapsEnable | 1.3.6.1.4.1.6296.101.4.12.2.1.1.26 | INTEGER | read-only | Enables/Disables R-APS node |
| INT sleY1731MegRapsRplOwner | 1.3.6.1.4.1.6296.101.4.12.2.1.1.27 | INTEGER | read-only | Indicates the owner of the ring protection link |
| I32 sleY1731MegRapsEastPort | 1.3.6.1.4.1.6296.101.4.12.2.1.1.28 | Integer32 | read-only | Indicates the east port of R-APS node |
| I32 sleY1731MegRapsWestPort | 1.3.6.1.4.1.6296.101.4.12.2.1.1.29 | Integer32 | read-only | Indicates the west port of R-APS node |
| INT sleY1731MegRapsRplPort | 1.3.6.1.4.1.6296.101.4.12.2.1.1.30 | INTEGER | read-only | Indicates the RPL port of R-APS node |
| I32 sleY1731MegRapsHoldOffTime | 1.3.6.1.4.1.6296.101.4.12.2.1.1.31 | Integer32 | read-only | Indicates the hold-off time for verifying local SF |
| I32 sleY1731MegRapsGuardTime | 1.3.6.1.4.1.6296.101.4.12.2.1.1.32 | Integer32 | read-only | Indicates the guard time for verifying local clear SF |
| I32 sleY1731MegRapsWaitToRestore | 1.3.6.1.4.1.6296.101.4.12.2.1.1.33 | Integer32 | read-only | Indicates the wait-to-restore time for verifying remote SF |
| INT sleY1731MegRapsState | 1.3.6.1.4.1.6296.101.4.12.2.1.1.34 | INTEGER | read-only | Indicate the state of r-aps state machine |
| INT sleY1731MegRapsEastPortStatus | 1.3.6.1.4.1.6296.101.4.12.2.1.1.35 | INTEGER | read-only | The port status of east port. |
| INT sleY1731MegRapsWestPortStatus | 1.3.6.1.4.1.6296.101.4.12.2.1.1.36 | INTEGER | read-only | The port status of west port. |
| INT sleY1731MegRapsNonRevertive | 1.3.6.1.4.1.6296.101.4.12.2.1.1.37 | INTEGER | read-only | NonRevertive |
| INT sleY1731MegRapsForcedSwitchEast | 1.3.6.1.4.1.6296.101.4.12.2.1.1.38 | INTEGER | read-only | ForcedSwitchEast |
| INT sleY1731MegRapsForcedSwitchWest | 1.3.6.1.4.1.6296.101.4.12.2.1.1.39 | INTEGER | read-only | ForcedSwitchWest |
| OCT sleY1731MegMd | 1.3.6.1.4.1.6296.101.4.12.2.1.1.40 | OCTET STRING | read-only | The MD name of MEG. |
| sleY1731MegControl | 1.3.6.1.4.1.6296.101.4.12.2.2 | |||
| INT sleY1731MegControlRequest | 1.3.6.1.4.1.6296.101.4.12.2.2.1 | INTEGER | read-write | Description. |
| SLE sleY1731MegControlStatus | 1.3.6.1.4.1.6296.101.4.12.2.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleY1731MegControlTimer | 1.3.6.1.4.1.6296.101.4.12.2.2.3 | Gauge32 | read-write | Description. |
| TIK sleY1731MegControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.2.2.4 | TimeTicks | read-only | Description. |
| SLE sleY1731MegControlReqResult | 1.3.6.1.4.1.6296.101.4.12.2.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleY1731MegControlIndex | 1.3.6.1.4.1.6296.101.4.12.2.2.6 | Integer32 | read-write | Indicates the MEG's Index |
| OCT sleY1731MegControlName | 1.3.6.1.4.1.6296.101.4.12.2.2.7 | OCTET STRING | read-write | The MEG's name: ICC (6 bytes) + UMC (6 bytes) |
| I32 sleY1731MegControlLevel | 1.3.6.1.4.1.6296.101.4.12.2.2.8 | Integer32 | read-write | Indicates the MEG's level |
| I32 sleY1731MegControlVid | 1.3.6.1.4.1.6296.101.4.12.2.2.9 | Integer32 | read-write | Indicates the MEG's VID |
| INT sleY1731MegControlMepEnable | 1.3.6.1.4.1.6296.101.4.12.2.2.10 | INTEGER | read-write | Enables/Disables Y.1731 OAM for MEPs |
| INT sleY1731MegControlCcEnable | 1.3.6.1.4.1.6296.101.4.12.2.2.11 | INTEGER | read-write | Enables/Disables MEPs to send Continuity Check messages |
| I32 sleY1731MegControlCcInterval | 1.3.6.1.4.1.6296.101.4.12.2.2.12 | Integer32 | read-write | Indicates the interval between CCM transmissions |
| I32 sleY1731MegControlCcPriority | 1.3.6.1.4.1.6296.101.4.12.2.2.13 | Integer32 | read-write | Indicates the CCM or LTM Message Priority |
| I32 sleY1731MegControlCcLossThreshold | 1.3.6.1.4.1.6296.101.4.12.2.2.14 | Integer32 | read-write | Indicates the minimum number of CCMs that can be missed before declaring that a MEP is down |
| I32 sleY1731MegControlCcHoldTime | 1.3.6.1.4.1.6296.101.4.12.2.2.15 | Integer32 | read-write | Indicates the time that data of a missing MEP is kept |
| I32 sleY1731MegControlFaultPriority | 1.3.6.1.4.1.6296.101.4.12.2.2.16 | Integer32 | read-write | Indicates the lowest priority for fault alarm |
| I32 sleY1731MegControlFaultKeepTime | 1.3.6.1.4.1.6296.101.4.12.2.2.17 | Integer32 | read-write | Indicates the keep time for the fault alarm |
| I32 sleY1731MegControlFaultClearTime | 1.3.6.1.4.1.6296.101.4.12.2.2.18 | Integer32 | read-write | Indicates the clear time for the fault alarm |
| INT sleY1731MegControlXcheckEnable | 1.3.6.1.4.1.6296.101.4.12.2.2.19 | INTEGER | read-write | Enables/Disables Y.1731 cross-check for a specific MEG |
| INT sleY1731MegControlAisEnable | 1.3.6.1.4.1.6296.101.4.12.2.2.20 | INTEGER | read-write | Enables/Disables ETH-AIS function |
| INT sleY1731MegControlAisTransmitEnable | 1.3.6.1.4.1.6296.101.4.12.2.2.21 | INTEGER | read-write | Enables/Disables ETH-AIS frame transmission on a MEP |
| INT sleY1731MegControlAisInterval | 1.3.6.1.4.1.6296.101.4.12.2.2.22 | INTEGER | read-write | Indicates the interval between AIS transmissions |
| I32 sleY1731MegControlAisLevel | 1.3.6.1.4.1.6296.101.4.12.2.2.23 | Integer32 | read-write | Indicates the client MEG's level |
| I32 sleY1731MegControlAisPriority | 1.3.6.1.4.1.6296.101.4.12.2.2.24 | Integer32 | read-write | Indicates the AIS Message Priority |
| INT sleY1731MegControlLckEnable | 1.3.6.1.4.1.6296.101.4.12.2.2.25 | INTEGER | read-write | Enables/Disables ETH-LCK function |
| INT sleY1731MegControlLckTransmitEnable | 1.3.6.1.4.1.6296.101.4.12.2.2.26 | INTEGER | read-write | Enables/Disables ETH-LCK frame transmission on a MEP |
| INT sleY1731MegControlLckInterval | 1.3.6.1.4.1.6296.101.4.12.2.2.27 | INTEGER | read-write | Indicates the interval between LCK transmissions |
| I32 sleY1731MegControlLckLevel | 1.3.6.1.4.1.6296.101.4.12.2.2.28 | Integer32 | read-write | Indicates the client MEG's level |
| I32 sleY1731MegControlLckPriority | 1.3.6.1.4.1.6296.101.4.12.2.2.29 | Integer32 | read-write | Indicates the LCK Message Priority |
| INT sleY1731MegControlOutOfService | 1.3.6.1.4.1.6296.101.4.12.2.2.30 | INTEGER | read-write | Indicates the out-of-service mode |
| INT sleY1731MegControlRapsEnable | 1.3.6.1.4.1.6296.101.4.12.2.2.31 | INTEGER | read-write | Enables/Disables R-APS node |
| INT sleY1731MegControlRapsRplOwner | 1.3.6.1.4.1.6296.101.4.12.2.2.32 | INTEGER | read-write | Indicates the owner of the ring protection link |
| I32 sleY1731MegControlRapsEastPort | 1.3.6.1.4.1.6296.101.4.12.2.2.33 | Integer32 | read-write | Indicates the east port of R-APS node Set zero to delete east port |
| I32 sleY1731MegControlRapsWestPort | 1.3.6.1.4.1.6296.101.4.12.2.2.34 | Integer32 | read-write | Indicates the west port of R-APS node Set zero to delete west port |
| INT sleY1731MegControlRapsRplPort | 1.3.6.1.4.1.6296.101.4.12.2.2.35 | INTEGER | read-write | Indicates the RPL port of R-APS node |
| I32 sleY1731MegControlRapsHoldOffTime | 1.3.6.1.4.1.6296.101.4.12.2.2.36 | Integer32 | read-write | Indicates the hold-off time for verifying local SF The hold-off time's step must be 100 |
| I32 sleY1731MegControlRapsGuardTime | 1.3.6.1.4.1.6296.101.4.12.2.2.37 | Integer32 | read-write | Indicates the guard time for verifying local clear SF The guard time's step must be 10 |
| I32 sleY1731MegControlRapsWaitToRestore | 1.3.6.1.4.1.6296.101.4.12.2.2.38 | Integer32 | read-write | Indicates the wait-to-restore time for verifying remote SF |
| INT sleY1731MegControlRapsNonRevertive | 1.3.6.1.4.1.6296.101.4.12.2.2.39 | INTEGER | read-write | NonRevertive |
| INT sleY1731MegControlRapsForcedSwitchEast | 1.3.6.1.4.1.6296.101.4.12.2.2.40 | INTEGER | read-write | ForcedSwitchEast |
| INT sleY1731MegControlRapsForcedSwitchWest | 1.3.6.1.4.1.6296.101.4.12.2.2.41 | INTEGER | read-write | ForcedSwitchWest |
| OCT sleY1731MegControlMd | 1.3.6.1.4.1.6296.101.4.12.2.2.42 | OCTET STRING | read-write | The MD name of MEG. |
| sleY1731MegNotification | 1.3.6.1.4.1.6296.101.4.12.2.3 | |||
| NTF sleY1731MegCreated | 1.3.6.1.4.1.6296.101.4.12.2.3.1 | createY1731Meg | ||
| NTF sleY1731MegDeleted | 1.3.6.1.4.1.6296.101.4.12.2.3.2 | deleteY1731Meg | ||
| NTF sleY1731MegMepEnableChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.3 | setY1731MepEnable | ||
| NTF sleY1731MegCcEnableChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.4 | setY1731CcEnable | ||
| NTF sleY1731MegCcProfileChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.5 | setY1731CcProfile | ||
| NTF sleY1731MegFaultProfileChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.6 | setY1731FaultProfile | ||
| NTF sleY1731MegXcheckEnableChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.7 | setY1731XcheckEnable | ||
| NTF sleY1731MegAisEnableChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.8 | setY1731AisEnable | ||
| NTF sleY1731MegAisTransmitEnableChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.9 | setY1731AisTransmitEnable | ||
| NTF sleY1731MegAisProfileChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.10 | setY1731AisProfile | ||
| NTF sleY1731MegLckEnableChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.11 | setY1731LckEnable | ||
| NTF sleY1731MegLckTransmitEnableChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.12 | setY1731LckTransmitEnable | ||
| NTF sleY1731MegLckProfileChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.13 | setY1731LckProfile | ||
| NTF sleY1731MegOutOfServiceChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.14 | setY1731OutOfService | ||
| NTF sleY1731MegRapsEnableChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.15 | setY1731RapsEnable | ||
| NTF sleY1731MegRapsRingportsChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.16 | setY1731RapsProfile | ||
| NTF sleY1731MegRapsRplPortChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.17 | Description. | ||
| NTF sleY1731MegRapsRplOwnerChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.18 | Description. | ||
| NTF sleY1731MegRapsTimerChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.19 | Description. | ||
| NTF sleY1731MegRemoteMepDestroyed | 1.3.6.1.4.1.6296.101.4.12.2.3.20 | destroyRemoteMep | ||
| NTF sleY1731MegErrorDestroyed | 1.3.6.1.4.1.6296.101.4.12.2.3.21 | destroyError | ||
| NTF sleY1731MegRapsNonRevertiveChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.22 | sleY1731MegRapsNonRevertiveChanged | ||
| NTF sleY1731MegRapsForcedSwitchEastChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.23 | sleY1731MegRapsForcedSwitchEastChanged | ||
| NTF sleY1731MegRapsForcedSwitchWestChanged | 1.3.6.1.4.1.6296.101.4.12.2.3.24 | sleY1731MegRapsForcedSwitchWestChanged | ||
| NTF sleY1731MegMdAdded | 1.3.6.1.4.1.6296.101.4.12.2.3.25 | createY1731Meg | ||
| NTF sleY1731MegMdDeleted | 1.3.6.1.4.1.6296.101.4.12.2.3.26 | createY1731Meg | ||
| sleY1731Mep | 1.3.6.1.4.1.6296.101.4.12.3 | |||
| sleY1731MepTable | 1.3.6.1.4.1.6296.101.4.12.3.1 | not-accessible | Description. | |
| sleY1731MepEntry | 1.3.6.1.4.1.6296.101.4.12.3.1.1 | not-accessible | Description. | |
| I32 sleY1731MepIdentifier | 1.3.6.1.4.1.6296.101.4.12.3.1.1.1 | Integer32 | read-only | MEP Id |
| I32 sleY1731MepIfIndex | 1.3.6.1.4.1.6296.101.4.12.3.1.1.2 | Integer32 | read-only | Brige Port Index whitch the MEP is attached |
| INT sleY1731MepDirection | 1.3.6.1.4.1.6296.101.4.12.3.1.1.3 | INTEGER | read-only | The direction in which the MEP faces on the Bridge port |
| INT sleY1731MepEnable | 1.3.6.1.4.1.6296.101.4.12.3.1.1.4 | INTEGER | read-only | Administrative state of the MEP |
| INT sleY1731MepFngState | 1.3.6.1.4.1.6296.101.4.12.3.1.1.5 | INTEGER | read-only | Current state of the MEP Fault Notification Generator State Machine |
| INT sleY1731MepCcEnable | 1.3.6.1.4.1.6296.101.4.12.3.1.1.6 | INTEGER | read-only | If set to true, the MEP will generate CCM messages |
| OCT sleY1731MepMacAddress | 1.3.6.1.4.1.6296.101.4.12.3.1.1.7 | OCTET STRING | read-only | MAC address of the MEP |
| INT sleY1731MepFaultPriority | 1.3.6.1.4.1.6296.101.4.12.3.1.1.8 | INTEGER | read-only | An integer value specifying the lowest priority defect that is allowed to generate fault alarm |
| I32 sleY1731MepFaultKeepTime | 1.3.6.1.4.1.6296.101.4.12.3.1.1.9 | Integer32 | read-only | The time that defects must be present before a Fault Alarm is issued |
| I32 sleY1731MepFaultClearTime | 1.3.6.1.4.1.6296.101.4.12.3.1.1.10 | Integer32 | read-only | The time that defects must be absent before resetting a Fault Alarm |
| INT sleY1731MepHighestPrDefect | 1.3.6.1.4.1.6296.101.4.12.3.1.1.11 | INTEGER | read-only | The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state |
| INT sleY1731MepAisEnable | 1.3.6.1.4.1.6296.101.4.12.3.1.1.12 | INTEGER | read-only | If set to true, the AIS function for the MEP is enabled |
| INT sleY1731MepAisTransmitEnable | 1.3.6.1.4.1.6296.101.4.12.3.1.1.13 | INTEGER | read-only | If set to true, the MEP can generate AIS messages |
| INT sleY1731MepLckEnable | 1.3.6.1.4.1.6296.101.4.12.3.1.1.14 | INTEGER | read-only | If set to true, the LCK function for the MEP is enabled |
| INT sleY1731MepLckTransmitEnable | 1.3.6.1.4.1.6296.101.4.12.3.1.1.15 | INTEGER | read-only | If set to true, the MEP can generate LCK messages |
| INT sleY1731MepOutOfService | 1.3.6.1.4.1.6296.101.4.12.3.1.1.16 | INTEGER | read-only | If set to true, the MEP is in out-of-service. |
| I32 sleY1731MepDlmEnabledRmep | 1.3.6.1.4.1.6296.101.4.12.3.1.1.17 | Integer32 | read-only | The RMEP identifier enabled DLM functin If set to zero, disabled DLM function. |
| BIT sleY1731MepDefects | 1.3.6.1.4.1.6296.101.4.12.3.1.1.18 | Bits | read-only | A vector of Boolean defect conditions |
| C32 sleY1731MepCcmSequenceErrors | 1.3.6.1.4.1.6296.101.4.12.3.1.1.19 | Counter32 | read-only | The total number of out-of-sequence CCMs received from all remote MEPs |
| C32 sleY1731MepCciSentCcms | 1.3.6.1.4.1.6296.101.4.12.3.1.1.20 | Counter32 | read-only | Total number of Continuity Check messages transmitted |
| I32 sleY1731MepNextLbmTransId | 1.3.6.1.4.1.6296.101.4.12.3.1.1.21 | Integer32 | read-only | Next sequence number/transaction identifier to be sent in a Loopback message |
| I32 sleY1731MepLbSuccessRate | 1.3.6.1.4.1.6296.101.4.12.3.1.1.22 | Integer32 | read-only | Loopback Success rate |
| C32 sleY1731MepLbRoundtripMin | 1.3.6.1.4.1.6296.101.4.12.3.1.1.23 | Counter32 | read-only | The minimum round trip time of Loopback message |
| C32 sleY1731MepLbRoundtripMax | 1.3.6.1.4.1.6296.101.4.12.3.1.1.24 | Counter32 | read-only | The maximum round trip time of Loopback message |
| C32 sleY1731MepLbRoundtripAvg | 1.3.6.1.4.1.6296.101.4.12.3.1.1.25 | Counter32 | read-only | The average round trip time of Loopback message |
| C32 sleY1731MepLbrIn | 1.3.6.1.4.1.6296.101.4.12.3.1.1.26 | Counter32 | read-only | Total number of valid, in-order Loopback Replies received |
| C32 sleY1731MepLbrInOutOfOrder | 1.3.6.1.4.1.6296.101.4.12.3.1.1.27 | Counter32 | read-only | The total number of valid, out-of-order Loopback Replies received |
| C32 sleY1731MepTstLbrInBitError | 1.3.6.1.4.1.6296.101.4.12.3.1.1.28 | Counter32 | read-only | The total number of invalid, bit-error Loopback Replies received for diagnostic test |
| C32 sleY1731MepTstLbrInCrcError | 1.3.6.1.4.1.6296.101.4.12.3.1.1.29 | Counter32 | read-only | The total number of invalid, crc-error Loopback Replies received for diagnostic test |
| I32 sleY1731MepLtmNextSeqNumber | 1.3.6.1.4.1.6296.101.4.12.3.1.1.30 | Integer32 | read-only | Next transaction identifier/sequence number to be sent in a Linktrace message. |
| C32 sleY1731MepUnexpLtrIn | 1.3.6.1.4.1.6296.101.4.12.3.1.1.31 | Counter32 | read-only | The total number of unexpected LTRs received |
| C32 sleY1731MepLbrOut | 1.3.6.1.4.1.6296.101.4.12.3.1.1.32 | Counter32 | read-only | Total number of Loopback Replies transmitted |
| I32 sleY1731MepTmLbmCount | 1.3.6.1.4.1.6296.101.4.12.3.1.1.33 | Integer32 | read-only | Indicates the count of LBM frame for the throughput-measurement |
| I32 sleY1731MepTmLbrCount | 1.3.6.1.4.1.6296.101.4.12.3.1.1.34 | Integer32 | read-only | Indicates the count of LBM frame for the throughput-measurement |
| I32 sleY1731MepTmLbrFirstLostId | 1.3.6.1.4.1.6296.101.4.12.3.1.1.35 | Integer32 | read-only | Indicates the transaction identifier of first lost LBR frame for the throughput-measurement |
| I32 sleY1731MepTmLbrMaxRate | 1.3.6.1.4.1.6296.101.4.12.3.1.1.36 | Integer32 | read-only | Indicates the maximum transmission rate |
| I32 sleY1731MepTmTstCount | 1.3.6.1.4.1.6296.101.4.12.3.1.1.37 | Integer32 | read-only | Indicates the count of TST message for the throughput-measurement |
| I32 sleY1731MepCcmFrameLossNearMin | 1.3.6.1.4.1.6296.101.4.12.3.1.1.38 | Integer32 | read-only | Indicates the minimum of dual-ended near-end frame loss |
| I32 sleY1731MepCcmFrameLossNearMax | 1.3.6.1.4.1.6296.101.4.12.3.1.1.39 | Integer32 | read-only | Indicates the maximum of dual-ended near-end frame loss |
| I32 sleY1731MepCcmFrameLossNearSum | 1.3.6.1.4.1.6296.101.4.12.3.1.1.40 | Integer32 | read-only | Indicates the sum of dual-ended near-end frame loss |
| I32 sleY1731MepCcmFrameLossFarMin | 1.3.6.1.4.1.6296.101.4.12.3.1.1.41 | Integer32 | read-only | Indicates the minimum of dual-ended far-end frame loss |
| I32 sleY1731MepCcmFrameLossFarMax | 1.3.6.1.4.1.6296.101.4.12.3.1.1.42 | Integer32 | read-only | Indicates the maximum of dual-ended far-end frame loss |
| I32 sleY1731MepCcmFrameLossFarSum | 1.3.6.1.4.1.6296.101.4.12.3.1.1.43 | Integer32 | read-only | Indicates the sum of dual-ended far-end frame loss |
| INT sleY1731MepPmEnable | 1.3.6.1.4.1.6296.101.4.12.3.1.1.44 | INTEGER | read-only | If set to true, the PM(performance monitoring) of the MEP is enabled |
| I32 sleY1731MepCcmFrameLossNearRatio | 1.3.6.1.4.1.6296.101.4.12.3.1.1.45 | Integer32 | read-only | Indicates the ratio of dual-ended near-end frame loss |
| I32 sleY1731MepCcmFrameLossNearAvgRatio | 1.3.6.1.4.1.6296.101.4.12.3.1.1.46 | Integer32 | read-only | Indicates the average ratio of dual-ended near-end frame loss |
| I32 sleY1731MepCcmFrameLossFarRatio | 1.3.6.1.4.1.6296.101.4.12.3.1.1.47 | Integer32 | read-only | Indicates the ratio of dual-ended far-end frame loss |
| I32 sleY1731MepCcmFrameLossFarAvgRatio | 1.3.6.1.4.1.6296.101.4.12.3.1.1.48 | Integer32 | read-only | Indicates the average ratio of dual-ended far-end frame loss |
| INT sleY1731MepRllcf | 1.3.6.1.4.1.6296.101.4.12.3.1.1.49 | INTEGER | read-only | If set to true, the MEP is a MEP of client link for remote link loss carry forward. |
| I32 sleY1731MepRllcfHoldOff | 1.3.6.1.4.1.6296.101.4.12.3.1.1.50 | Integer32 | read-only | It is a Hold-off time of Remote LLCF and its unit is millisecond, interval is 10ms. |
| I32 sleY1731MepRllcfGuardTime | 1.3.6.1.4.1.6296.101.4.12.3.1.1.51 | Integer32 | read-only | It is a Guard time of Remote LLCF and its unit is millisecond, interval is 100ms.(default:500) |
| sleY1731MepControl | 1.3.6.1.4.1.6296.101.4.12.3.2 | |||
| INT sleY1731MepControlRequest | 1.3.6.1.4.1.6296.101.4.12.3.2.1 | INTEGER | read-write | Description. |
| SLE sleY1731MepControlStatus | 1.3.6.1.4.1.6296.101.4.12.3.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleY1731MepControlTimer | 1.3.6.1.4.1.6296.101.4.12.3.2.3 | Gauge32 | read-write | Description. |
| TIK sleY1731MepControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.3.2.4 | TimeTicks | read-only | Description. |
| SLE sleY1731MepControlReqResult | 1.3.6.1.4.1.6296.101.4.12.3.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleY1731MepControlIdentifier | 1.3.6.1.4.1.6296.101.4.12.3.2.6 | Integer32 | read-write | MEP Id |
| I32 sleY1731MepControlMegIndex | 1.3.6.1.4.1.6296.101.4.12.3.2.7 | Integer32 | read-write | A index of MEG table |
| I32 sleY1731MepControlIfIndex | 1.3.6.1.4.1.6296.101.4.12.3.2.8 | Integer32 | read-write | Bridge Port Index whitch the MEP is attached |
| INT sleY1731MepControlDirection | 1.3.6.1.4.1.6296.101.4.12.3.2.9 | INTEGER | read-write | The direction in which the MEP faces on the Bridge port |
| INT sleY1731MepControlEnable | 1.3.6.1.4.1.6296.101.4.12.3.2.10 | INTEGER | read-write | Administrative state of the MEP |
| INT sleY1731MepControlCcEnable | 1.3.6.1.4.1.6296.101.4.12.3.2.11 | INTEGER | read-write | If set to true, the MEP will generate CCM messages |
| INT sleY1731MepControlFaultPriority | 1.3.6.1.4.1.6296.101.4.12.3.2.12 | INTEGER | read-write | An integer value specifying the lowest priority defect that is allowed to generate fault alarm |
| I32 sleY1731MepControlFaultKeepTime | 1.3.6.1.4.1.6296.101.4.12.3.2.13 | Integer32 | read-write | The time that defects must be present before a Fault Alarm is issued |
| I32 sleY1731MepControlFaultClearTime | 1.3.6.1.4.1.6296.101.4.12.3.2.14 | Integer32 | read-write | The time that defects must be absent before resetting a Fault Alarm |
| INT sleY1731MepControlAisEnable | 1.3.6.1.4.1.6296.101.4.12.3.2.15 | INTEGER | read-write | If set to true, the AIS function for the MEP is enabled |
| INT sleY1731MepControlAisTransmitEnable | 1.3.6.1.4.1.6296.101.4.12.3.2.16 | INTEGER | read-write | If set to true, the MEP can generate AIS messages |
| INT sleY1731MepControlLckEnable | 1.3.6.1.4.1.6296.101.4.12.3.2.17 | INTEGER | read-write | If set to true, the LCK function for the MEP is enabled |
| INT sleY1731MepControlLckTransmitEnable | 1.3.6.1.4.1.6296.101.4.12.3.2.18 | INTEGER | read-write | If set to true, the MEP can generate LCK messages |
| INT sleY1731MepControlOutOfService | 1.3.6.1.4.1.6296.101.4.12.3.2.19 | INTEGER | read-write | If set to true, the MEP is in out-of-service. |
| I32 sleY1731MepControlDlmEnabledRmep | 1.3.6.1.4.1.6296.101.4.12.3.2.20 | Integer32 | read-write | The RMEP identifier enabled DLM functin If set to zero, disabled DLM function. |
| INT sleY1731MepControlTransmitLbmIsUnicast | 1.3.6.1.4.1.6296.101.4.12.3.2.21 | INTEGER | read-write | Indicates transmitting unicast or multicast frame |
| OCT sleY1731MepControlTransmitLbmDestMacAddress | 1.3.6.1.4.1.6296.101.4.12.3.2.22 | OCTET STRING | read-write | The Target MAC Address Field to be transmitted |
| I32 sleY1731MepControlTransmitLbmDestMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.23 | Integer32 | read-write | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent |
| INT sleY1731MepControlTransmitLbmDestIsMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.24 | INTEGER | read-write | True indicates that MEPID of the target MEP is used for Loopback transmission |
| I32 sleY1731MepControlTransmitLbmCount | 1.3.6.1.4.1.6296.101.4.12.3.2.25 | Integer32 | read-write | The number of Loopback messages to be transmitted |
| I32 sleY1731MepControlTransmitLbmInterval | 1.3.6.1.4.1.6296.101.4.12.3.2.26 | Integer32 | read-write | Indicates the interval for sending LBM |
| I32 sleY1731MepControlTransmitLbmTimeout | 1.3.6.1.4.1.6296.101.4.12.3.2.27 | Integer32 | read-write | Indicates the waiting time for receiving the expected LBR |
| I32 sleY1731MepControlTransmitLbmPriority | 1.3.6.1.4.1.6296.101.4.12.3.2.28 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag |
| I32 sleY1731MepControlTransmitLbmLength | 1.3.6.1.4.1.6296.101.4.12.3.2.29 | Integer32 | read-write | Indicates the length of Data TLV |
| OCT sleY1731MepControlTransmitLtmTargetMacAddress | 1.3.6.1.4.1.6296.101.4.12.3.2.30 | OCTET STRING | read-write | The Target MAC Address Field to be transmitted: A unicast destination MAC address. |
| I32 sleY1731MepControlTransmitLtmTargetMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.31 | Integer32 | read-write | An indication of the Target MAC Address Field to be transmitted |
| INT sleY1731MepControlTransmitLtmTargetIsMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.32 | INTEGER | read-write | True indicates that MEPID of the target MEP is used for Linktrace transmission. |
| BIT sleY1731MepControlTransmitLtmFlags | 1.3.6.1.4.1.6296.101.4.12.3.2.33 | Bits | read-write | The flags field for LTMs transmitted by the MEP |
| I32 sleY1731MepControlTransmitLtmTtl | 1.3.6.1.4.1.6296.101.4.12.3.2.34 | Integer32 | read-write | The LTM TTL field |
| I32 sleY1731MepControlTransmitLtmPriority | 1.3.6.1.4.1.6296.101.4.12.3.2.35 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag |
| I32 sleY1731MepControlTransmitTstLbmDestMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.36 | Integer32 | read-write | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent |
| I32 sleY1731MepControlTransmitTstLbmDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.37 | Integer32 | read-write | Indicates the duration to send LBM |
| I32 sleY1731MepControlTransmitTstLbmInterval | 1.3.6.1.4.1.6296.101.4.12.3.2.38 | Integer32 | read-write | Indicates the interval for sending LBM |
| I32 sleY1731MepControlTransmitTstLbmTimeout | 1.3.6.1.4.1.6296.101.4.12.3.2.39 | Integer32 | read-write | Indicates the waiting time for receiving the expected LBR |
| I32 sleY1731MepControlTransmitTstLbmPriority | 1.3.6.1.4.1.6296.101.4.12.3.2.40 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag |
| I32 sleY1731MepControlTransmitTstLbmLength | 1.3.6.1.4.1.6296.101.4.12.3.2.41 | Integer32 | read-write | Indicates the length of Test TLV |
| I32 sleY1731MepControlTransmitTstLbmPattern | 1.3.6.1.4.1.6296.101.4.12.3.2.42 | Integer32 | read-write | Indicates the pattern of Test TLV used for diagnostic test |
| I32 sleY1731MepControlTransmitTmLbmDestMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.43 | Integer32 | read-write | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent |
| I32 sleY1731MepControlTransmitTmLbmDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.44 | Integer32 | read-write | Indicates the duration to send LBM |
| I32 sleY1731MepControlTransmitTmLbmPartDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.45 | Integer32 | read-write | Indicates the part duration of LBM to be transmitted at the same transmission rate |
| I32 sleY1731MepControlTransmitTmLbmStartRate | 1.3.6.1.4.1.6296.101.4.12.3.2.46 | Integer32 | read-write | Indicates the the number of LBMs to be transmitted per second at first time |
| I32 sleY1731MepControlTransmitTmLbmIncRate | 1.3.6.1.4.1.6296.101.4.12.3.2.47 | Integer32 | read-write | Indicates the increment of number of LBMs to be transmitted |
| I32 sleY1731MepControlTransmitTmLbmTimeout | 1.3.6.1.4.1.6296.101.4.12.3.2.48 | Integer32 | read-write | Indicates the waiting time for receiving the expected LBR |
| I32 sleY1731MepControlTransmitTmLbmPriority | 1.3.6.1.4.1.6296.101.4.12.3.2.49 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag |
| I32 sleY1731MepControlTransmitTmLbmLength | 1.3.6.1.4.1.6296.101.4.12.3.2.50 | Integer32 | read-write | Indicates the length of Test TLV |
| I32 sleY1731MepControlTransmitTmLbmPattern | 1.3.6.1.4.1.6296.101.4.12.3.2.51 | Integer32 | read-write | Indicates the pattern of Test TLV used for diagnostic test |
| INT sleY1731MepControlTransmitTstIsUnicast | 1.3.6.1.4.1.6296.101.4.12.3.2.52 | INTEGER | read-write | Indicates transmitting unicast or multicast frame |
| I32 sleY1731MepControlTransmitTstDestMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.53 | Integer32 | read-write | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the TST is to be sent |
| I32 sleY1731MepControlTransmitTstDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.54 | Integer32 | read-write | Indicates the duration to send TST |
| I32 sleY1731MepControlTransmitTstInterval | 1.3.6.1.4.1.6296.101.4.12.3.2.55 | Integer32 | read-write | Indicates the interval for sending TST |
| I32 sleY1731MepControlTransmitTstPriority | 1.3.6.1.4.1.6296.101.4.12.3.2.56 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag |
| I32 sleY1731MepControlTransmitTstLength | 1.3.6.1.4.1.6296.101.4.12.3.2.57 | Integer32 | read-write | Indicates the length of Test TLV |
| I32 sleY1731MepControlTransmitTstPattern | 1.3.6.1.4.1.6296.101.4.12.3.2.58 | Integer32 | read-write | Indicates the pattern of Test TLV used for diagnostic test |
| I32 sleY1731MepControlReceiveTstDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.59 | Integer32 | read-write | Indicates the duration to receive TST |
| INT sleY1731MepControlTransmitTmTstIsUnicast | 1.3.6.1.4.1.6296.101.4.12.3.2.60 | INTEGER | read-write | Indicates transmitting unicast or multicast frame |
| I32 sleY1731MepControlTransmitTmTstDestMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.61 | Integer32 | read-write | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the TST is to be sent |
| I32 sleY1731MepControlTransmitTmTstDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.62 | Integer32 | read-write | Indicates the duration to send TST |
| I32 sleY1731MepControlTransmitTmTstPartDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.63 | Integer32 | read-write | Indicates the part duration of TST to be transmitted at the same transmission rate |
| I32 sleY1731MepControlTransmitTmTstStartRate | 1.3.6.1.4.1.6296.101.4.12.3.2.64 | Integer32 | read-write | Indicates the the number of TSTs to be transmitted per second at first time |
| I32 sleY1731MepControlTransmitTmTstIncRate | 1.3.6.1.4.1.6296.101.4.12.3.2.65 | Integer32 | read-write | Indicates the increment of number of TSTs to be transmitted |
| I32 sleY1731MepControlTransmitTmTstTimeout | 1.3.6.1.4.1.6296.101.4.12.3.2.66 | Integer32 | read-write | Indicates the waiting time for receiving the expected LBR |
| I32 sleY1731MepControlTransmitTmTstPriority | 1.3.6.1.4.1.6296.101.4.12.3.2.67 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag |
| I32 sleY1731MepControlTransmitTmTstLength | 1.3.6.1.4.1.6296.101.4.12.3.2.68 | Integer32 | read-write | Indicates the length of Test TLV |
| I32 sleY1731MepControlTransmitTmTstPattern | 1.3.6.1.4.1.6296.101.4.12.3.2.69 | Integer32 | read-write | Indicates the pattern of Test TLV used for diagnostic test |
| I32 sleY1731MepControlReceiveTmTstDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.70 | Integer32 | read-write | Indicates the duration to receive TST |
| INT sleY1731MepControlTransmitLmmIsUnicast | 1.3.6.1.4.1.6296.101.4.12.3.2.71 | INTEGER | read-write | A flag to indicates transmitting unicast or multicast frame |
| I32 sleY1731MepControlTransmitLmmDestMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.72 | Integer32 | read-write | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LMM is to be sent |
| I32 sleY1731MepControlTransmitLmmDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.73 | Integer32 | read-write | Indicates the duration to send LMM |
| I32 sleY1731MepControlTransmitLmmInterval | 1.3.6.1.4.1.6296.101.4.12.3.2.74 | Integer32 | read-write | Indicates the interval for sending LMM |
| I32 sleY1731MepControlTransmitLmmTimeout | 1.3.6.1.4.1.6296.101.4.12.3.2.75 | Integer32 | read-write | Indicates the waiting time for receiving the expected LMM |
| I32 sleY1731MepControlTransmitLmmPriority | 1.3.6.1.4.1.6296.101.4.12.3.2.76 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag |
| INT sleY1731MepControlTransmit1dmIsUnicast | 1.3.6.1.4.1.6296.101.4.12.3.2.77 | INTEGER | read-write | A flag to indicates transmitting unicast or multicast frame |
| I32 sleY1731MepControlTransmit1dmDestMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.78 | Integer32 | read-write | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the 1DM is to be sent |
| I32 sleY1731MepControlTransmit1dmDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.79 | Integer32 | read-write | Indicates the duration to send 1DM |
| I32 sleY1731MepControlTransmit1dmInterval | 1.3.6.1.4.1.6296.101.4.12.3.2.80 | Integer32 | read-write | Indicates the interval for sending 1DM |
| I32 sleY1731MepControlTransmit1dmPriority | 1.3.6.1.4.1.6296.101.4.12.3.2.81 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag |
| I32 sleY1731MepControlReceive1dmDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.82 | Integer32 | read-write | Indicates the duration to receive 1DM |
| INT sleY1731MepControlTransmitDmmIsUnicast | 1.3.6.1.4.1.6296.101.4.12.3.2.83 | INTEGER | read-write | A flag to indicates transmitting unicast or multicast frame |
| I32 sleY1731MepControlTransmitDmmDestMepId | 1.3.6.1.4.1.6296.101.4.12.3.2.84 | Integer32 | read-write | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the DMM is to be sent |
| I32 sleY1731MepControlTransmitDmmDuration | 1.3.6.1.4.1.6296.101.4.12.3.2.85 | Integer32 | read-write | Indicates the duration to send DMM |
| I32 sleY1731MepControlTransmitDmmInterval | 1.3.6.1.4.1.6296.101.4.12.3.2.86 | Integer32 | read-write | Indicates the interval for sending DMM |
| I32 sleY1731MepControlTransmitDmmTimeout | 1.3.6.1.4.1.6296.101.4.12.3.2.87 | Integer32 | read-write | Indicates the waiting time for receiving the expected DMM |
| I32 sleY1731MepControlTransmitDmmPriority | 1.3.6.1.4.1.6296.101.4.12.3.2.88 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag |
| INT sleY1731MepControlPmEnable | 1.3.6.1.4.1.6296.101.4.12.3.2.89 | INTEGER | read-write | If set to true, the PM(performance monitoring) of the MEP is enabled |
| INT sleY1731MepControlRllcf | 1.3.6.1.4.1.6296.101.4.12.3.2.90 | INTEGER | read-write | If set to true, the MEP is a MEP of client link for remote link loss carry forward. |
| I32 sleY1731MepControlRllcfHoldOff | 1.3.6.1.4.1.6296.101.4.12.3.2.91 | Integer32 | read-write | It is a Hold-off time of Remote LLCF and its unit is millisecond, interval is 10ms. |
| I32 sleY1731MepControlRllcfGuardTime | 1.3.6.1.4.1.6296.101.4.12.3.2.92 | Integer32 | read-write | It is a Guard time of Remote LLCF and its unit is millisecond, interval is 100ms.(default:500) |
| sleY1731MepNotification | 1.3.6.1.4.1.6296.101.4.12.3.3 | |||
| NTF sleY1731MepCreated | 1.3.6.1.4.1.6296.101.4.12.3.3.1 | createY1731Mep | ||
| NTF sleY1731MepDeleted | 1.3.6.1.4.1.6296.101.4.12.3.3.2 | deleteY1731Mep | ||
| NTF sleY1731MepEnableChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.3 | setY1731MepEnable | ||
| NTF sleY1731MepCcEnableChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.4 | setY1731CcEnable | ||
| NTF sleY1731MepFaultProfileChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.5 | setY1731FaultProfile | ||
| NTF sleY1731MepAisEnableChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.6 | setY1731AisEnable | ||
| NTF sleY1731MepAisTransmitEnableChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.7 | setY1731AisTransmitEnable | ||
| NTF sleY1731MepLckEnableChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.8 | setY1731LckEnable | ||
| NTF sleY1731MepLckTransmitEnableChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.9 | setY1731LckTransmitEnable | ||
| NTF sleY1731MepOutOfServiceChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.10 | setY1731OutOfService | ||
| NTF sleY1731MepDlmEnableChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.11 | setY1731DlmEnable | ||
| NTF sleY1731MepTransmitLbmFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.12 | transmitY1731Lbm | ||
| NTF sleY1731MepTransmitLtmFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.13 | transmitY1731Ltm | ||
| NTF sleY1731MepTransmitTstLbmFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.14 | transmitY1731TstLbm | ||
| NTF sleY1731MepTransmitTmLbmFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.15 | transmitY1731TmLbm | ||
| NTF sleY1731MepTransmitTstFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.16 | transmitY1731Tst | ||
| NTF sleY1731MepReceiveTstFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.17 | receiveY1731Tst | ||
| NTF sleY1731MepTransmitTmTstFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.18 | transmitY1731TmTst | ||
| NTF sleY1731MepReceiveTmTstFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.19 | receiveY1731TmTst | ||
| NTF sleY1731MepTransmitLmmFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.20 | transmitY1731Lmm | ||
| NTF sleY1731MepTransmit1dmFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.21 | transmitY17311dm | ||
| NTF sleY1731MepReceive1dmFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.22 | receiveY17311dm | ||
| NTF sleY1731MepTransmitDmmFinished | 1.3.6.1.4.1.6296.101.4.12.3.3.23 | transmitY1731Dmm | ||
| NTF sleY1731MepPmEnableChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.24 | setY1731PmEnable | ||
| NTF sleY1731MepRllcfChanged | 1.3.6.1.4.1.6296.101.4.12.3.3.25 | setY1731MepRllcf | ||
| sleY1731Mip | 1.3.6.1.4.1.6296.101.4.12.4 | |||
| sleY1731MipTable | 1.3.6.1.4.1.6296.101.4.12.4.1 | not-accessible | Description. | |
| sleY1731MipEntry | 1.3.6.1.4.1.6296.101.4.12.4.1.1 | not-accessible | Description. | |
| I32 sleY1731MipPort | 1.3.6.1.4.1.6296.101.4.12.4.1.1.1 | Integer32 | read-only | Indicates the port number |
| I32 sleY1731MipLevel | 1.3.6.1.4.1.6296.101.4.12.4.1.1.2 | Integer32 | read-only | Indicates the MIP's level |
| INT sleY1731MipType | 1.3.6.1.4.1.6296.101.4.12.4.1.1.3 | INTEGER | read-only | Indicate the MIPs type |
| sleY1731MipControl | 1.3.6.1.4.1.6296.101.4.12.4.2 | |||
| INT sleY1731MipControlRequest | 1.3.6.1.4.1.6296.101.4.12.4.2.1 | INTEGER | read-write | Description. |
| SLE sleY1731MipControlStatus | 1.3.6.1.4.1.6296.101.4.12.4.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleY1731MipControlTimer | 1.3.6.1.4.1.6296.101.4.12.4.2.3 | Gauge32 | read-write | Description. |
| TIK sleY1731MipControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.4.2.4 | TimeTicks | read-only | Description. |
| SLE sleY1731MipControlReqResult | 1.3.6.1.4.1.6296.101.4.12.4.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleY1731MipControlPort | 1.3.6.1.4.1.6296.101.4.12.4.2.6 | Integer32 | read-write | Indicates the port number |
| I32 sleY1731MipControlLevel | 1.3.6.1.4.1.6296.101.4.12.4.2.7 | Integer32 | read-write | Indicates the MIP's level |
| sleY1731MipNotification | 1.3.6.1.4.1.6296.101.4.12.4.3 | |||
| NTF sleY1731MipCreated | 1.3.6.1.4.1.6296.101.4.12.4.3.1 | createY1731Mip | ||
| NTF sleY1731MipDeleted | 1.3.6.1.4.1.6296.101.4.12.4.3.2 | deleteY1731Mip | ||
| sleY1731Xcheck | 1.3.6.1.4.1.6296.101.4.12.5 | |||
| sleY1731XcheckTable | 1.3.6.1.4.1.6296.101.4.12.5.1 | not-accessible | Description. | |
| sleY1731XcheckEntry | 1.3.6.1.4.1.6296.101.4.12.5.1.1 | not-accessible | Description. | |
| I32 sleY1731XcheckMepIdentifier | 1.3.6.1.4.1.6296.101.4.12.5.1.1.1 | Integer32 | read-only | Indicates the remote MEP's Id |
| INT sleY1731XcheckMepState | 1.3.6.1.4.1.6296.101.4.12.5.1.1.2 | INTEGER | read-only | Indicates the cross-check MEPs state |
| sleY1731XcheckControl | 1.3.6.1.4.1.6296.101.4.12.5.2 | |||
| INT sleY1731XcheckControlRequest | 1.3.6.1.4.1.6296.101.4.12.5.2.1 | INTEGER | read-write | Description. |
| SLE sleY1731XcheckControlStatus | 1.3.6.1.4.1.6296.101.4.12.5.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleY1731XcheckControlTimer | 1.3.6.1.4.1.6296.101.4.12.5.2.3 | Gauge32 | read-write | Description. |
| TIK sleY1731XcheckControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.5.2.4 | TimeTicks | read-only | Description. |
| SLE sleY1731XcheckControlReqResult | 1.3.6.1.4.1.6296.101.4.12.5.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleY1731XcheckControlMepIdentifier | 1.3.6.1.4.1.6296.101.4.12.5.2.6 | Integer32 | read-write | Indicates the remote MEP's Id |
| I32 sleY1731XcheckControlMegIndex | 1.3.6.1.4.1.6296.101.4.12.5.2.7 | Integer32 | read-write | Indicates the MEGs Index |
| sleY1731XcheckNotification | 1.3.6.1.4.1.6296.101.4.12.5.3 | |||
| NTF sleY1731XcheckMepCreated | 1.3.6.1.4.1.6296.101.4.12.5.3.1 | createY1731XcheckMep | ||
| NTF sleY1731XcheckMepDeleted | 1.3.6.1.4.1.6296.101.4.12.5.3.2 | deleteY1731XcheckMep | ||
| sleY1731CcMac | 1.3.6.1.4.1.6296.101.4.12.6 | |||
| sleY1731CcMacTable | 1.3.6.1.4.1.6296.101.4.12.6.1 | not-accessible | Description. | |
| sleY1731CcMacEntry | 1.3.6.1.4.1.6296.101.4.12.6.1.1 | not-accessible | Description. | |
| OCT sleY1731CcMacAddress | 1.3.6.1.4.1.6296.101.4.12.6.1.1.1 | OCTET STRING | read-only | Indicates the unicast MAC address to send CCM |
| sleY1731CcMacControl | 1.3.6.1.4.1.6296.101.4.12.6.2 | |||
| INT sleY1731CcMacControlRequest | 1.3.6.1.4.1.6296.101.4.12.6.2.1 | INTEGER | read-write | Description. |
| SLE sleY1731CcMacControlStatus | 1.3.6.1.4.1.6296.101.4.12.6.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleY1731CcMacControlTimer | 1.3.6.1.4.1.6296.101.4.12.6.2.3 | Gauge32 | read-write | Description. |
| TIK sleY1731CcMacControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.6.2.4 | TimeTicks | read-only | Description. |
| SLE sleY1731CcMacControlReqResult | 1.3.6.1.4.1.6296.101.4.12.6.2.5 | SleControlRequestResultType | read-only | Result of the last command. |
| I32 sleY1731CcMacControlMegIndex | 1.3.6.1.4.1.6296.101.4.12.6.2.6 | Integer32 | read-write | Indicates the MEG's Index |
| I32 sleY1731CcMacControlMepIdentifier | 1.3.6.1.4.1.6296.101.4.12.6.2.7 | Integer32 | read-write | MEP Id |
| OCT sleY1731CcMacControlAddress | 1.3.6.1.4.1.6296.101.4.12.6.2.8 | OCTET STRING | read-write | Indicates the unicast MAC address to send CCM When running deleteY1731CcMac, if this is zero-length, delete all unicast mac. |
| sleY1731CcMacNotification | 1.3.6.1.4.1.6296.101.4.12.6.3 | |||
| NTF sleY1731CcMacCreated | 1.3.6.1.4.1.6296.101.4.12.6.3.1 | createY1731CcMac | ||
| NTF sleY1731CcMacDeleted | 1.3.6.1.4.1.6296.101.4.12.6.3.2 | deleteY1731CcMac | ||
| sleY1731AisMac | 1.3.6.1.4.1.6296.101.4.12.7 | |||
| sleY1731AisMacTable | 1.3.6.1.4.1.6296.101.4.12.7.1 | not-accessible | Description. | |
| sleY1731AisMacEntry | 1.3.6.1.4.1.6296.101.4.12.7.1.1 | not-accessible | Description. | |
| OCT sleY1731AisMacAddress | 1.3.6.1.4.1.6296.101.4.12.7.1.1.1 | OCTET STRING | read-only | Indicates the unicast MAC address to send AIS |
| sleY1731AisMacControl | 1.3.6.1.4.1.6296.101.4.12.7.2 | |||
| INT sleY1731AisMacControlRequest | 1.3.6.1.4.1.6296.101.4.12.7.2.1 | INTEGER | read-write | Description. |
| SLE sleY1731AisMacControlStatus | 1.3.6.1.4.1.6296.101.4.12.7.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleY1731AisMacControlTimer | 1.3.6.1.4.1.6296.101.4.12.7.2.3 | Gauge32 | read-write | Description. |
| TIK sleY1731AisMacControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.7.2.4 | TimeTicks | read-only | Description. |
| SLE sleY1731AisMacControlReqResult | 1.3.6.1.4.1.6296.101.4.12.7.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleY1731AisMacControlMegIndex | 1.3.6.1.4.1.6296.101.4.12.7.2.6 | Integer32 | read-write | Indicates the MEG's Index |
| I32 sleY1731AisMacControlMepIdentifier | 1.3.6.1.4.1.6296.101.4.12.7.2.7 | Integer32 | read-write | MEP Id |
| OCT sleY1731AisMacControlAddress | 1.3.6.1.4.1.6296.101.4.12.7.2.8 | OCTET STRING | read-write | Indicates the unicast MAC address to send AIS When running deleteY1731AisMac, if this is zero-length, delete all unicast mac. |
| sleY1731AisMacNotification | 1.3.6.1.4.1.6296.101.4.12.7.3 | |||
| NTF sleY1731AisMacCreated | 1.3.6.1.4.1.6296.101.4.12.7.3.1 | createY1731AisMac | ||
| NTF sleY1731AisMacDeleted | 1.3.6.1.4.1.6296.101.4.12.7.3.2 | deleteY1731AisMac | ||
| sleY1731LckMac | 1.3.6.1.4.1.6296.101.4.12.8 | |||
| sleY1731LckMacTable | 1.3.6.1.4.1.6296.101.4.12.8.1 | not-accessible | Description. | |
| sleY1731LckMacEntry | 1.3.6.1.4.1.6296.101.4.12.8.1.1 | not-accessible | Description. | |
| OCT sleY1731LckMacAddress | 1.3.6.1.4.1.6296.101.4.12.8.1.1.1 | OCTET STRING | read-write | Indicates the unicast MAC address to send LCK |
| sleY1731LckMacControl | 1.3.6.1.4.1.6296.101.4.12.8.2 | |||
| INT sleY1731LckMacControlRequest | 1.3.6.1.4.1.6296.101.4.12.8.2.1 | INTEGER | read-write | Description. |
| SLE sleY1731LckMacControlStatus | 1.3.6.1.4.1.6296.101.4.12.8.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleY1731LckMacControlTimer | 1.3.6.1.4.1.6296.101.4.12.8.2.3 | Gauge32 | read-write | Description. |
| TIK sleY1731LckMacControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.8.2.4 | TimeTicks | read-only | Description. |
| SLE sleY1731LckMacControlReqResult | 1.3.6.1.4.1.6296.101.4.12.8.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleY1731LckMacControlMegIndex | 1.3.6.1.4.1.6296.101.4.12.8.2.6 | Integer32 | read-write | Indicates the MEG's Index |
| I32 sleY1731LckMacControlMepIdentifier | 1.3.6.1.4.1.6296.101.4.12.8.2.7 | Integer32 | read-write | MEP Id |
| OCT sleY1731LckMacControlAddress | 1.3.6.1.4.1.6296.101.4.12.8.2.8 | OCTET STRING | read-write | Indicates the unicast MAC address to send LCK When running deleteY1731LckMac, if this is zero-length, delete all unicast mac. |
| sleY1731LckMacNotification | 1.3.6.1.4.1.6296.101.4.12.8.3 | |||
| NTF sleY1731LckMacCreated | 1.3.6.1.4.1.6296.101.4.12.8.3.1 | createY1731LckMac | ||
| NTF sleY1731LckMacDeleted | 1.3.6.1.4.1.6296.101.4.12.8.3.2 | deleteY1731LckMac | ||
| sleY1731Rmep | 1.3.6.1.4.1.6296.101.4.12.9 | |||
| sleY1731RmepTable | 1.3.6.1.4.1.6296.101.4.12.9.1 | not-accessible | Description. | |
| sleY1731RmepEntry | 1.3.6.1.4.1.6296.101.4.12.9.1.1 | not-accessible | Description. | |
| I32 sleY1731RmepIdentifier | 1.3.6.1.4.1.6296.101.4.12.9.1.1.1 | Integer32 | read-only | Indicates the remote MEP's Id |
| INT sleY1731RmepState | 1.3.6.1.4.1.6296.101.4.12.9.1.1.2 | INTEGER | read-only | Indicates the operational state of the remote MEP State machines |
| TIK sleY1731RmepFailedOkTime | 1.3.6.1.4.1.6296.101.4.12.9.1.1.3 | TimeTicks | read-only | Indicates the time (SysUpTime) at which the Remote MEP state machine last entered either the RMEP_FAILED or RMEP_OK state. |
| OCT sleY1731RmepMacAddress | 1.3.6.1.4.1.6296.101.4.12.9.1.1.4 | OCTET STRING | read-only | Indicates the MAC address of the remote MEP |
| I32 sleY1731RmepIfIndex | 1.3.6.1.4.1.6296.101.4.12.9.1.1.5 | Integer32 | read-only | Indicates the port number of the remote MEP |
| INT sleY1731RmepRdi | 1.3.6.1.4.1.6296.101.4.12.9.1.1.6 | INTEGER | read-only | Indicates State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received |
| INT sleY1731RmepLoc | 1.3.6.1.4.1.6296.101.4.12.9.1.1.7 | INTEGER | read-only | Indicates Loss-of-continuity |
| C32 sleY1731RmepReceiveTstCount | 1.3.6.1.4.1.6296.101.4.12.9.1.1.8 | Counter32 | read-only | Indicates the number of received TST frame |
| C32 sleY1731RmepReceiveTstOutOfOrder | 1.3.6.1.4.1.6296.101.4.12.9.1.1.9 | Counter32 | read-only | Indicates the number of received out-of-order TST frame |
| C32 sleY1731RmepReceiveTstBitError | 1.3.6.1.4.1.6296.101.4.12.9.1.1.10 | Counter32 | read-only | Indicates the number of received bit-error TST frame |
| C32 sleY1731RmepReceiveTstCrcError | 1.3.6.1.4.1.6296.101.4.12.9.1.1.11 | Counter32 | read-only | Indicates the number of received crc-error TST frame |
| C32 sleY1731RmepReceiveTmTstCount | 1.3.6.1.4.1.6296.101.4.12.9.1.1.12 | Counter32 | read-only | Indicates the number of received TST frame for the throughput-measurement |
| I32 sleY1731RmepReceiveTmTstLostId | 1.3.6.1.4.1.6296.101.4.12.9.1.1.13 | Integer32 | read-only | Indicates the transaction identifier of first lost TST frame for the throughput-measurement |
| I32 sleY1731RmepLmrFrameLossNearMin | 1.3.6.1.4.1.6296.101.4.12.9.1.1.14 | Integer32 | read-only | Indicates the minimum of single-ended near-end frame loss |
| I32 sleY1731RmepLmrFrameLossNearMax | 1.3.6.1.4.1.6296.101.4.12.9.1.1.15 | Integer32 | read-only | Indicates the maximum of single-ended near-end frame loss |
| I32 sleY1731RmepLmrFrameLossNearSum | 1.3.6.1.4.1.6296.101.4.12.9.1.1.16 | Integer32 | read-only | Indicates the sum of single-ended near-end frame loss |
| I32 sleY1731RmepLmrFrameLossFarMin | 1.3.6.1.4.1.6296.101.4.12.9.1.1.17 | Integer32 | read-only | Indicates the minimum of single-ended far-end frame loss |
| I32 sleY1731RmepLmrFrameLossFarMax | 1.3.6.1.4.1.6296.101.4.12.9.1.1.18 | Integer32 | read-only | Indicates the maximum of single-ended far-end frame loss |
| I32 sleY1731RmepLmrFrameLossFarSum | 1.3.6.1.4.1.6296.101.4.12.9.1.1.19 | Integer32 | read-only | Indicates the sum of single-ended far-end frame loss |
| C32 sleY1731RmepReceive1dmCount | 1.3.6.1.4.1.6296.101.4.12.9.1.1.20 | Counter32 | read-only | Indicates the number of received 1DM frames for the frame delay measurement |
| I32 sleY1731Rmep1dmFrameDelayMin | 1.3.6.1.4.1.6296.101.4.12.9.1.1.21 | Integer32 | read-only | Indicates the minimum of one-way frame delay |
| I32 sleY1731Rmep1dmFrameDelayMax | 1.3.6.1.4.1.6296.101.4.12.9.1.1.22 | Integer32 | read-only | Indicates the maximum of one-way frame delay |
| I32 sleY1731Rmep1dmFrameDelayAvg | 1.3.6.1.4.1.6296.101.4.12.9.1.1.23 | Integer32 | read-only | Indicates the average of one-way frame delay |
| I32 sleY1731Rmep1dmFrameDelayVar | 1.3.6.1.4.1.6296.101.4.12.9.1.1.24 | Integer32 | read-only | Indicates the variation of one-way frame delay |
| C32 sleY1731RmepReceiveDmrCount | 1.3.6.1.4.1.6296.101.4.12.9.1.1.25 | Counter32 | read-only | Indicates the number of received DMR frames for the frame delay measurement |
| I32 sleY1731RmepDmrFrameDelayMin | 1.3.6.1.4.1.6296.101.4.12.9.1.1.26 | Integer32 | read-only | Indicates the minimum of two-way frame delay |
| I32 sleY1731RmepDmrFrameDelayMax | 1.3.6.1.4.1.6296.101.4.12.9.1.1.27 | Integer32 | read-only | Indicates the maximum of two-way frame delay |
| I32 sleY1731RmepDmrFrameDelayAvg | 1.3.6.1.4.1.6296.101.4.12.9.1.1.28 | Integer32 | read-only | Indicates the average of two-way frame delay |
| I32 sleY1731RmepDmrFrameDelayVar | 1.3.6.1.4.1.6296.101.4.12.9.1.1.29 | Integer32 | read-only | Indicates the variation of two-way frame delay |
| I32 sleY1731RmepLmrFrameLossNearRatio | 1.3.6.1.4.1.6296.101.4.12.9.1.1.30 | Integer32 | read-only | Indicates the ratio of single-ended near-end frame loss |
| I32 sleY1731RmepLmrFrameLossNearAvgRatio | 1.3.6.1.4.1.6296.101.4.12.9.1.1.31 | Integer32 | read-only | Indicates the average ratio of single-ended near-end frame loss |
| I32 sleY1731RmepLmrFrameLossFarRatio | 1.3.6.1.4.1.6296.101.4.12.9.1.1.32 | Integer32 | read-only | Indicates the ratio of single-ended far-end frame loss |
| I32 sleY1731RmepLmrFrameLossFarAvgRatio | 1.3.6.1.4.1.6296.101.4.12.9.1.1.33 | Integer32 | read-only | Indicates the average ratio of single-ended far-end frame loss |
| sleY1731RmepControl | 1.3.6.1.4.1.6296.101.4.12.9.2 | |||
| INT sleY1731RmepControlRequest | 1.3.6.1.4.1.6296.101.4.12.9.2.1 | INTEGER | read-write | Description. |
| SLE sleY1731RMepControlStatus | 1.3.6.1.4.1.6296.101.4.12.9.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleY1731RmepControlTimer | 1.3.6.1.4.1.6296.101.4.12.9.2.3 | Gauge32 | read-write | Description. |
| TIK sleY1731RmepControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.9.2.4 | TimeTicks | read-only | Description. |
| SLE sleY1731RmepControlReqResult | 1.3.6.1.4.1.6296.101.4.12.9.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleY1731RmepControlIdentifier | 1.3.6.1.4.1.6296.101.4.12.9.2.6 | Integer32 | read-write | Remote MEP Id |
| I32 sleY1731RmepControlMegIndex | 1.3.6.1.4.1.6296.101.4.12.9.2.7 | Integer32 | read-write | A index of MEG table |
| I32 sleY1731RmepControlIfIndex | 1.3.6.1.4.1.6296.101.4.12.9.2.8 | Integer32 | read-write | Bridge Port Index whitch the MEP is attached |
| sleY1731RmepNotification | 1.3.6.1.4.1.6296.101.4.12.9.3 | |||
| NTF sleY1731RmepCreated | 1.3.6.1.4.1.6296.101.4.12.9.3.1 | Description. | ||
| NTF sleY1731RmepDeleted | 1.3.6.1.4.1.6296.101.4.12.9.3.2 | Description. | ||
| sleY1731LbrMcast | 1.3.6.1.4.1.6296.101.4.12.10 | |||
| sleY1731LbrMcastTable | 1.3.6.1.4.1.6296.101.4.12.10.1 | not-accessible | Description. | |
| sleY1731LbrMcastEntry | 1.3.6.1.4.1.6296.101.4.12.10.1.1 | not-accessible | Description. | |
| I32 sleY1731LbrReceiveOrder | 1.3.6.1.4.1.6296.101.4.12.10.1.1.1 | Integer32 | read-only | Indicates an index to distinguish among multiple LBRs |
| OCT sleY1731LbrRemoteMacAddress | 1.3.6.1.4.1.6296.101.4.12.10.1.1.2 | OCTET STRING | read-only | Indicates the MAC address of the remote MEP |
| sleY1731LbrUcast | 1.3.6.1.4.1.6296.101.4.12.11 | |||
| sleY1731LbrUcastTable | 1.3.6.1.4.1.6296.101.4.12.11.1 | not-accessible | Description. | |
| sleY1731LbrUcastEntry | 1.3.6.1.4.1.6296.101.4.12.11.1.1 | not-accessible | Description. | |
| I32 sleY1731LbrTransId | 1.3.6.1.4.1.6296.101.4.12.11.1.1.1 | Integer32 | read-only | Indicates the transaction identifier of LBR message. |
| I32 sleY1731LbrRoundTripTime | 1.3.6.1.4.1.6296.101.4.12.11.1.1.2 | Integer32 | read-only | Indicates the round-trip time of LBR message. |
| sleY1731Ltr | 1.3.6.1.4.1.6296.101.4.12.12 | |||
| sleY1731LtrTable | 1.3.6.1.4.1.6296.101.4.12.12.1 | not-accessible | Description. | |
| sleY1731LtrEntry | 1.3.6.1.4.1.6296.101.4.12.12.1.1 | not-accessible | Description. | |
| I32 sleY1731LtrSeqNumber | 1.3.6.1.4.1.6296.101.4.12.12.1.1.1 | Integer32 | read-only | Indicates the LTM Transaction Identifier returned from a previous Transmit Linktrace Message command, indicating the LTM entry to which the LTR entries will be attached |
| I32 sleY1731LtrReceiveOrder | 1.3.6.1.4.1.6296.101.4.12.12.1.1.2 | Integer32 | read-only | Indicates an index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value |
| I32 sleY1731LtrRoundTripTime | 1.3.6.1.4.1.6296.101.4.12.12.1.1.3 | Integer32 | read-only | Indicates the round-trip time of LTR message. |
| I32 sleY1731LtrTtl | 1.3.6.1.4.1.6296.101.4.12.12.1.1.4 | Integer32 | read-only | Indicates TTL field value for a returned LTR. |
| INT sleY1731LtrForwarded | 1.3.6.1.4.1.6296.101.4.12.12.1.1.5 | INTEGER | read-only | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| INT sleY1731LtrTerminalMep | 1.3.6.1.4.1.6296.101.4.12.12.1.1.6 | INTEGER | read-only | Indicates a boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| OCT sleY1731LtrLastEgressIdentifier | 1.3.6.1.4.1.6296.101.4.12.12.1.1.7 | OCTET STRING | read-only | Identifies the MEP Linktrace Initiator that originated, or the Linktrace Responder that forwarded, the LTM to which this LTR is the response |
| OCT sleY1731LtrNextEgressIdentifier | 1.3.6.1.4.1.6296.101.4.12.12.1.1.8 | OCTET STRING | read-only | Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM to the next hop. |
| INT sleY1731LtrRelay | 1.3.6.1.4.1.6296.101.4.12.12.1.1.9 | INTEGER | read-only | Indicates the value returned in the Ingress Action Field of the LTM |
| INT sleY1731LtrIngress | 1.3.6.1.4.1.6296.101.4.12.12.1.1.10 | INTEGER | read-only | Indicates the value returned in the Ingress Action Field of the LTM |
| OCT sleY1731LtrIngressMac | 1.3.6.1.4.1.6296.101.4.12.12.1.1.11 | OCTET STRING | read-only | Indicates MAC address returned in the ingress MAC address field. |
| I32 sleY1731LtrIngressPort | 1.3.6.1.4.1.6296.101.4.12.12.1.1.12 | Integer32 | read-only | Indicates Ingress Port ID |
| INT sleY1731LtrEgress | 1.3.6.1.4.1.6296.101.4.12.12.1.1.13 | INTEGER | read-only | Indicates the value returned in the Egress Action Field of the LTM |
| OCT sleY1731LtrEgressMac | 1.3.6.1.4.1.6296.101.4.12.12.1.1.14 | OCTET STRING | read-only | Indicates MAC address returned in the egress MAC address field. |
| I32 sleY1731LtrEgressPort | 1.3.6.1.4.1.6296.101.4.12.12.1.1.15 | Integer32 | read-only | Indicates Egress Port ID |
| sleY1731ConfigError | 1.3.6.1.4.1.6296.101.4.12.13 | |||
| sleY1731ConfigErrorTable | 1.3.6.1.4.1.6296.101.4.12.13.1 | not-accessible | Description. | |
| sleY1731ConfigErrorEntry | 1.3.6.1.4.1.6296.101.4.12.13.1.1 | not-accessible | Description. | |
| I32 sleY1731ConfigErrorVid | 1.3.6.1.4.1.6296.101.4.12.13.1.1.1 | Integer32 | read-only | Indicates the Configuration Error VLAN Identifier |
| I32 sleY1731ConfigErrorIfIndex | 1.3.6.1.4.1.6296.101.4.12.13.1.1.2 | Integer32 | read-only | Indicates the Configuration Error Port Number |
| BIT sleY1731ConfigErrorType | 1.3.6.1.4.1.6296.101.4.12.13.1.1.3 | Bits | read-only | Indicates the Configuration Error Type |
| sleY1731MipCcdb | 1.3.6.1.4.1.6296.101.4.12.14 | |||
| sleY1731MipCcdbTable | 1.3.6.1.4.1.6296.101.4.12.14.1 | not-accessible | Description. | |
| sleY1731MipCcdbEntry | 1.3.6.1.4.1.6296.101.4.12.14.1.1 | not-accessible | Description. | |
| I32 sleY1731MipCcdbIndex | 1.3.6.1.4.1.6296.101.4.12.14.1.1.1 | Integer32 | read-only | Indicates the MIP CCDB's Index |
| I32 sleY1731MipCcdbVlanId | 1.3.6.1.4.1.6296.101.4.12.14.1.1.2 | Integer32 | read-only | VLAN Id |
| OCT sleY1731MipCcdbMacAddr | 1.3.6.1.4.1.6296.101.4.12.14.1.1.3 | OCTET STRING | read-only | Indicates MAC address of the remote MEP |
| I32 sleY1731MipCcdbPort | 1.3.6.1.4.1.6296.101.4.12.14.1.1.4 | Integer32 | read-only | Indicates the Port number that the CCM output |
| TIK sleY1731MipCcdbKeepTime | 1.3.6.1.4.1.6296.101.4.12.14.1.1.5 | TimeTicks | read-only | Indicates an up-date time of a entry |
| sleY1731UplinkRedundancy | 1.3.6.1.4.1.6296.101.4.12.15 | |||
| sleY1731URTable | 1.3.6.1.4.1.6296.101.4.12.15.1 | not-accessible | Y1731 Uplink-redundancy information table. | |
| sleY1731UREntry | 1.3.6.1.4.1.6296.101.4.12.15.1.1 | not-accessible | key: sleY1731URMegIndex | |
| INT sleY1731URMegIndex | 1.3.6.1.4.1.6296.101.4.12.15.1.1.1 | INTEGER | read-only | The MEG index. |
| OCT sleY1731URMegName | 1.3.6.1.4.1.6296.101.4.12.15.1.1.2 | OCTET STRING | read-only | The MEG name. |
| INT sleY1731URDedicatedVlan | 1.3.6.1.4.1.6296.101.4.12.15.1.1.3 | INTEGER | read-only | Indicates R-APS node to use dedicated-VLAN disable : all VLAN enable : one VLAN |
| INT sleY1731UREnableStatus | 1.3.6.1.4.1.6296.101.4.12.15.1.1.4 | INTEGER | read-only | Uplink-redundancy feature 0 : disable 1 : enable |
| OCT sleY1731URConnectivityCheckMeg | 1.3.6.1.4.1.6296.101.4.12.15.1.1.5 | OCTET STRING | read-only | Indicates the connectivity check - MEG name. |
| INT sleY1731URPrimaryMepId | 1.3.6.1.4.1.6296.101.4.12.15.1.1.6 | INTEGER | read-only | Indicates the connectivity check - primary MEP's ID |
| INT sleY1731URSecondaryMepId | 1.3.6.1.4.1.6296.101.4.12.15.1.1.7 | INTEGER | read-only | Indicates the connectivity check - secondary MEP's ID |
| INT sleY1731URControlVlan | 1.3.6.1.4.1.6296.101.4.12.15.1.1.8 | INTEGER | read-only | Indicates the control VLAN |
| INT sleY1731URNodeConf | 1.3.6.1.4.1.6296.101.4.12.15.1.1.9 | INTEGER | read-only | Indicates the (master/slave) node of the redundancy |
| INT sleY1731URNodeConfPortNum | 1.3.6.1.4.1.6296.101.4.12.15.1.1.10 | INTEGER | read-write | The port number |
| INT sleY1731URNodeConfPortStatus | 1.3.6.1.4.1.6296.101.4.12.15.1.1.11 | INTEGER | read-only | The uplink port status 0: none 1: disabled 2: forwarding 3: blocking |
| INT sleY1731URNonRevertive | 1.3.6.1.4.1.6296.101.4.12.15.1.1.12 | INTEGER | read-only | The non-revertive mode |
| INT sleY1731URTrustMemberCount | 1.3.6.1.4.1.6296.101.4.12.15.1.1.13 | INTEGER | read-only | Indicates the trust LOC count at link-aggregation port |
| INT sleY1731URWaitToRestore | 1.3.6.1.4.1.6296.101.4.12.15.1.1.14 | INTEGER | read-only | Indicates the wait-to-restore time ( 5 - 720 ) |
| INT sleY1731URForceSwitch | 1.3.6.1.4.1.6296.101.4.12.15.1.1.15 | INTEGER | read-only | The forced-switch of uplink port |
| INT sleY1731URSFCondition | 1.3.6.1.4.1.6296.101.4.12.15.1.1.16 | INTEGER | read-only | The sf condition |
| OCT sleY1731URTrafficVlan | 1.3.6.1.4.1.6296.101.4.12.15.1.1.17 | OCTET STRING | read-only | The Traffic vlan. |
| INT sleY1731URState | 1.3.6.1.4.1.6296.101.4.12.15.1.1.18 | INTEGER | read-only | The uplink redundancy node state none(0) unReady(1) ready(2) active(3) standby(4) preActive(5) |
| INT sleY1731URManualSwitch | 1.3.6.1.4.1.6296.101.4.12.15.1.1.19 | INTEGER | read-only | The manual-switch of uplink port |
| sleY1731URControl | 1.3.6.1.4.1.6296.101.4.12.15.2 | |||
| INT sleY1731URControlRequest | 1.3.6.1.4.1.6296.101.4.12.15.2.1 | INTEGER | read-write | This attribute identifies the control commands. updateAlarmList: the NE updates entries of alarms in the sleAlarmListTable after having changed alarm severities of alarms (due to change profile pointers in managed entities or after modification of alarm severities in profiles). This command should be applied once after having finisled modifications of severties. modifyAlarmSeverity: modifies the severity of an alarm in specific profile. createAlarmSeverityProfile: creates a new profile with default severities. The severities then have to be modified with command changeAlarmSeverity. deleteAlarmSeverityProfile: deletes a profile. Profile 1 is not allowed to be deleted. Notifications : none |
| SLE sleY1731URControlStatus | 1.3.6.1.4.1.6296.101.4.12.15.2.2 | SleControlStatusType | read-write | The status of a control request. |
| G32 sleY1731URControlTimer | 1.3.6.1.4.1.6296.101.4.12.15.2.3 | Gauge32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleY1731URControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.15.2.4 | TimeTicks | read-write | The time stamp of the last command (end of command). |
| SLE sleY1731URControlReqResult | 1.3.6.1.4.1.6296.101.4.12.15.2.5 | SleControlRequestResultType | read-write | The result of the last user command. |
| INT sleY1731URControlMegIndex | 1.3.6.1.4.1.6296.101.4.12.15.2.6 | INTEGER | read-write | The MEG index. |
| OCT sleY1731URControlMegName | 1.3.6.1.4.1.6296.101.4.12.15.2.7 | OCTET STRING | read-write | The MEG name. |
| INT sleY1731URControlDedicatedVlan | 1.3.6.1.4.1.6296.101.4.12.15.2.8 | INTEGER | read-write | Indicates R-APS node to use dedicated-VLAN disable : all VLAN enable : one VLAN |
| INT sleY1731URControlEnableStatus | 1.3.6.1.4.1.6296.101.4.12.15.2.9 | INTEGER | read-write | Uplink-redundancy feature 0 : disable 1 : enable |
| OCT sleY1731URControlConnectivityCheckMeg | 1.3.6.1.4.1.6296.101.4.12.15.2.10 | OCTET STRING | read-write | Indicates the connectivity check - MEG name. |
| INT sleY1731URControlPrimaryMepId | 1.3.6.1.4.1.6296.101.4.12.15.2.11 | INTEGER | read-write | Indicates the connectivity check - primary MEP's ID |
| INT sleY1731URControlSecondaryMepId | 1.3.6.1.4.1.6296.101.4.12.15.2.12 | INTEGER | read-write | Indicates the connectivity check - secondary MEP's ID |
| INT sleY1731URControlControlVlan | 1.3.6.1.4.1.6296.101.4.12.15.2.13 | INTEGER | read-write | Indicates the control VLAN |
| INT sleY1731URControlNodeConf | 1.3.6.1.4.1.6296.101.4.12.15.2.14 | INTEGER | read-write | Indicates the (master/slave) node of the redundancy |
| INT sleY1731URControlNodeConfPortNum | 1.3.6.1.4.1.6296.101.4.12.15.2.15 | INTEGER | read-write | The port number |
| INT sleY1731URControlNonRevertive | 1.3.6.1.4.1.6296.101.4.12.15.2.16 | INTEGER | read-write | The non-revertive mode |
| INT sleY1731URControlTrustMemberCount | 1.3.6.1.4.1.6296.101.4.12.15.2.17 | INTEGER | read-write | Indicates the trust LOC count at link-aggregation port |
| INT sleY1731URControlWaitToRestore | 1.3.6.1.4.1.6296.101.4.12.15.2.18 | INTEGER | read-write | Indicates the wait-to-restore time ( 5 - 720 ) |
| INT sleY1731URControlForceSwitch | 1.3.6.1.4.1.6296.101.4.12.15.2.19 | INTEGER | read-write | The forced-switch of uplink port |
| INT sleY1731URControlSFCondition | 1.3.6.1.4.1.6296.101.4.12.15.2.20 | INTEGER | read-write | The sf condition |
| OCT sleY1731URControlTrafficVlan | 1.3.6.1.4.1.6296.101.4.12.15.2.21 | OCTET STRING | read-write | The Traffic vlan |
| INT sleY1731URControlManualSwitch | 1.3.6.1.4.1.6296.101.4.12.15.2.22 | INTEGER | read-write | The manual-switch of uplink port |
| sleY1731URNotification | 1.3.6.1.4.1.6296.101.4.12.15.3 | |||
| NTF sleY1731URDedicatedVlanChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.1 | setY1731URDedicatedVlan | ||
| NTF sleY1731UREnableStatusChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.2 | setY1731UREnableStatus | ||
| NTF sleY1731URCCPrimaryMepIdChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.3 | setY1731URCCPrimaryMepId | ||
| NTF sleY1731URCCPrimaryMepIdCleared | 1.3.6.1.4.1.6296.101.4.12.15.3.4 | delY1731URCCPrimaryMepId | ||
| NTF sleY1731URCCSecondaryMepIdChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.5 | setY1731URCCSecondaryMepId | ||
| NTF sleY1731URCCSecondaryMepIdCleared | 1.3.6.1.4.1.6296.101.4.12.15.3.6 | delY1731URCCSecondaryMepId | ||
| NTF sleY1731URControlVlanChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.7 | setY1731URControlVlan | ||
| NTF sleY1731URControlVlanCleared | 1.3.6.1.4.1.6296.101.4.12.15.3.8 | delY1731URControlVlan | ||
| NTF sleY1731URNodeConfChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.9 | setY1731URNodeConf | ||
| NTF sleY1731URNodeConfCleared | 1.3.6.1.4.1.6296.101.4.12.15.3.10 | delY1731URNodeConf | ||
| NTF sleY1731URNonRevertiveChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.11 | setY1731URNonRevertive | ||
| NTF sleY1731URTrustMemberCountChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.12 | setY1731URTrustMemberCount | ||
| NTF sleY1731URTrustMemberCountCleared | 1.3.6.1.4.1.6296.101.4.12.15.3.13 | delY1731URTrustMemberCount | ||
| NTF sleY1731URWaitToRestoreChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.14 | setY1731URWaitToRestore | ||
| NTF sleY1731URWaitToRestoreCleared | 1.3.6.1.4.1.6296.101.4.12.15.3.15 | delY1731URWaitToRestore | ||
| NTF sleY1731URForceSwitchChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.16 | setForceSwitch | ||
| NTF sleY1731URManualSwitchChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.17 | setManualSwitch | ||
| NTF sleY1731URSFConditionChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.18 | setSFCondition | ||
| NTF sleY1731URTrafficVlanChanged | 1.3.6.1.4.1.6296.101.4.12.15.3.19 | setTrafficVlan. | ||
| NTF sleY1731URTrafficVlanCleared | 1.3.6.1.4.1.6296.101.4.12.15.3.20 | clearTrafficVlan. | ||
| sleY1731LocRefMep | 1.3.6.1.4.1.6296.101.4.12.16 | |||
| sleY1731LocRefMepTable | 1.3.6.1.4.1.6296.101.4.12.16.1 | not-accessible | Description. | |
| sleY1731LocRefMepEntry | 1.3.6.1.4.1.6296.101.4.12.16.1.1 | not-accessible | Description. | |
| I32 sleY1731LRMepIndex | 1.3.6.1.4.1.6296.101.4.12.16.1.1.1 | Integer32 | read-only | Indicates the index of the LOC reference MEP. |
| I32 sleY1731LRMepDMegIndex | 1.3.6.1.4.1.6296.101.4.12.16.1.1.2 | Integer32 | read-only | Indicates the MEG's Index of Down MEP |
| I32 sleY1731LRMepDMepIdentifier | 1.3.6.1.4.1.6296.101.4.12.16.1.1.3 | Integer32 | read-only | Indicates the identifier of Down MEP. |
| I32 sleY1731LRMepDRmepIdentifier | 1.3.6.1.4.1.6296.101.4.12.16.1.1.4 | Integer32 | read-only | Indicates the identifier of Remote MEP. |
| sleY1731LocRefMepControl | 1.3.6.1.4.1.6296.101.4.12.16.2 | |||
| INT sleY1731LRMepControlRequest | 1.3.6.1.4.1.6296.101.4.12.16.2.1 | INTEGER | read-write | Description. |
| SLE sleY1731LRMepControlStatus | 1.3.6.1.4.1.6296.101.4.12.16.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleY1731LRMepControlTimer | 1.3.6.1.4.1.6296.101.4.12.16.2.3 | Gauge32 | read-write | Description. |
| TIK sleY1731LRMepControlTimeStamp | 1.3.6.1.4.1.6296.101.4.12.16.2.4 | TimeTicks | read-only | Description. |
| SLE sleY1731LRMepControlReqResult | 1.3.6.1.4.1.6296.101.4.12.16.2.5 | SleControlRequestResultType | read-only | Result of the last command. |
| I32 sleY1731LRMepControlMegIndex | 1.3.6.1.4.1.6296.101.4.12.16.2.6 | Integer32 | read-write | Indicates the MEG's Index of Up MEP. |
| I32 sleY1731LRMepControlMepIdentifier | 1.3.6.1.4.1.6296.101.4.12.16.2.7 | Integer32 | read-write | Indicates the identifier of Up MEP. |
| I32 sleY1731LRMepControlRmepIdentifier | 1.3.6.1.4.1.6296.101.4.12.16.2.8 | Integer32 | read-write | Indicates the identifier of RMEP id of Up MEP. |
| I32 sleY1731LRMepControlDMegIndex | 1.3.6.1.4.1.6296.101.4.12.16.2.9 | Integer32 | read-write | Indicates the MEG's Index of Down MEP. |
| I32 sleY1731LRMepControlDMepIdentifier | 1.3.6.1.4.1.6296.101.4.12.16.2.10 | Integer32 | read-write | Indicates the identifier of Down MEP. |
| I32 sleY1731LRMepControlDRmepIdentifier | 1.3.6.1.4.1.6296.101.4.12.16.2.11 | Integer32 | read-write | Indicates the identifier of RMEP id of Down MEP. |
| sleY1731LocRefMepNotification | 1.3.6.1.4.1.6296.101.4.12.16.3 | |||
| NTF sleY1731LRMepCreated | 1.3.6.1.4.1.6296.101.4.12.16.3.1 | createY1731LocRefMep | ||
| NTF sleY1731LRMEPDeleted | 1.3.6.1.4.1.6296.101.4.12.16.3.3 | deleteY1731LocRefMep | ||
| sleCfmOam | 1.3.6.1.4.1.6296.101.4.13 | |||
| sleCfmBase | 1.3.6.1.4.1.6296.101.4.13.1 | |||
| sleCfmBaseGroup | 1.3.6.1.4.1.6296.101.4.13.1.1 | |||
| INT sleCfmEnable | 1.3.6.1.4.1.6296.101.4.13.1.1.1 | INTEGER | read-only | Enables/Ddisables IEEE 802.1ag CFM OAM function |
| I32 sleCfmLtrCacheHoldTime | 1.3.6.1.4.1.6296.101.4.13.1.1.2 | Integer32 | read-only | Indicates the time that cache entries will be retained |
| I32 sleCfmLtrCacheSize | 1.3.6.1.4.1.6296.101.4.13.1.1.3 | Integer32 | read-only | Indicates the number of entries in the traceroute cache |
| BIT sleCfmSnmpServerTraps | 1.3.6.1.4.1.6296.101.4.13.1.1.4 | Bits | read-only | Indicates the SNMP traps |
| I32 sleCfmXcheckStartDelay | 1.3.6.1.4.1.6296.101.4.13.1.1.5 | Integer32 | read-only | Indicates the delay before the cross-check is started |
| sleCfmBaseControl | 1.3.6.1.4.1.6296.101.4.13.1.2 | |||
| INT sleCfmBaseControlRequest | 1.3.6.1.4.1.6296.101.4.13.1.2.1 | INTEGER | read-write | This attribute identifies the control commands. updateAlarmList: the NE updates entries of alarms in the sleAlarmListTable after having changed alarm severities of alarms (due to change profile pointers in managed entities or after modification of alarm severities in profiles). This command should be applied once after having finisled modifications of severties. modifyAlarmSeverity: modifies the severity of an alarm in specific profile. createAlarmSeverityProfile: creates a new profile with default severities. The severities then have to be modified with command changeAlarmSeverity. deleteAlarmSeverityProfile: deletes a profile. Profile 1 is not allowed to be deleted. Notifications : none |
| SLE sleCfmBaseControlStatus | 1.3.6.1.4.1.6296.101.4.13.1.2.2 | SleControlStatusType | read-only | The status of a control request. |
| G32 sleCfmBaseControlTimer | 1.3.6.1.4.1.6296.101.4.13.1.2.3 | Gauge32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleCfmBaseControlTimeStamp | 1.3.6.1.4.1.6296.101.4.13.1.2.4 | TimeTicks | read-only | The time stamp of the last command (end of command). |
| SLE sleCfmBaseControlReqResult | 1.3.6.1.4.1.6296.101.4.13.1.2.5 | SleControlRequestResultType | read-only | The result of the last user command. |
| INT sleCfmBaseControlEnable | 1.3.6.1.4.1.6296.101.4.13.1.2.6 | INTEGER | read-write | Enables/Ddisables IEEE 802.1ag CFM OAM function |
| I32 sleCfmBaseControlLtrCacheHoldTime | 1.3.6.1.4.1.6296.101.4.13.1.2.7 | Integer32 | read-write | Indicates the time that cache entries will be retained |
| I32 sleCfmBaseControlLtrCacheSize | 1.3.6.1.4.1.6296.101.4.13.1.2.8 | Integer32 | read-write | Indicates the number of entries in the traceroute cache |
| BIT sleCfmBaseControlSnmpServerTraps | 1.3.6.1.4.1.6296.101.4.13.1.2.9 | Bits | read-write | Indicates the SNMP traps |
| I32 sleCfmBaseControlXcheckStartDelay | 1.3.6.1.4.1.6296.101.4.13.1.2.10 | Integer32 | read-write | Indicates the delay before the cross-check is started |
| INT sleCfmBaseControlTrunkIndex | 1.3.6.1.4.1.6296.101.4.13.1.2.11 | INTEGER | read-write | Trunk Port Index |
| OCT sleCfmBaseControlTrunkMdName | 1.3.6.1.4.1.6296.101.4.13.1.2.12 | OCTET STRING | read-write | trunk port md name. |
| I32 sleCfmBaseControlTrunkMaVid | 1.3.6.1.4.1.6296.101.4.13.1.2.13 | Integer32 | read-write | Indicates the MA's VID |
| sleCfmBaseNotification | 1.3.6.1.4.1.6296.101.4.13.1.3 | |||
| NTF sleCfmEnableChanged | 1.3.6.1.4.1.6296.101.4.13.1.3.1 | setCfmEnable | ||
| NTF sleCfmLtrCacheProfileChanged | 1.3.6.1.4.1.6296.101.4.13.1.3.2 | setCfmLtrCacheProfile | ||
| NTF sleCfmSnmpServerTrapsChanged | 1.3.6.1.4.1.6296.101.4.13.1.3.3 | setCfmSnmpProfile | ||
| NTF sleCfmXcheckStartDelayChanged | 1.3.6.1.4.1.6296.101.4.13.1.3.4 | setCfmXcheckProfile | ||
| NTF sleCfmMipCcdbDestroyed | 1.3.6.1.4.1.6296.101.4.13.1.3.5 | destroyMipCcdb | ||
| NTF sleCfmLtrCacheDestroyed | 1.3.6.1.4.1.6296.101.4.13.1.3.6 | destroyLtrCache | ||
| NTF sleCfmTrunkPortCreated | 1.3.6.1.4.1.6296.101.4.13.1.3.7 | createCfmTrunkPort | ||
| NTF sleCfmTrunkPortDeleted | 1.3.6.1.4.1.6296.101.4.13.1.3.8 | deleteCfmTrunkPort | ||
| sleCfmTrunkTable | 1.3.6.1.4.1.6296.101.4.13.1.4 | not-accessible | Description. | |
| sleCfmTrunkEntry | 1.3.6.1.4.1.6296.101.4.13.1.4.1 | not-accessible | Description. | |
| INT sleCfmTrunkIndex | 1.3.6.1.4.1.6296.101.4.13.1.4.1.1 | INTEGER | read-only | trunk port index. |
| OCT sleCfmTrunkMdName | 1.3.6.1.4.1.6296.101.4.13.1.4.1.2 | OCTET STRING | read-only | trunk port md name. |
| INT sleCfmTrunkMaVid | 1.3.6.1.4.1.6296.101.4.13.1.4.1.3 | INTEGER | read-only | Indicates the MA's VID |
| sleCfmMd | 1.3.6.1.4.1.6296.101.4.13.2 | |||
| sleCfmMdTable | 1.3.6.1.4.1.6296.101.4.13.2.1 | not-accessible | Description. | |
| sleCfmMdEntry | 1.3.6.1.4.1.6296.101.4.13.2.1.1 | not-accessible | Description. | |
| I32 sleCfmMdIndex | 1.3.6.1.4.1.6296.101.4.13.2.1.1.1 | Integer32 | read-only | Indicates the MD's Index |
| OCT sleCfmMdName | 1.3.6.1.4.1.6296.101.4.13.2.1.1.2 | OCTET STRING | read-only | The MD's name |
| I32 sleCfmMdLevel | 1.3.6.1.4.1.6296.101.4.13.2.1.1.3 | Integer32 | read-only | Indicates the MD's level |
| INT sleCfmMdMepEnable | 1.3.6.1.4.1.6296.101.4.13.2.1.1.4 | INTEGER | read-only | Enables/Disables CFM OAM for MEPs |
| INT sleCfmMdCcEnable | 1.3.6.1.4.1.6296.101.4.13.2.1.1.5 | INTEGER | read-only | Enables/Disables MEPs to send Continuity Check messages |
| I32 sleCfmMdCcInterval | 1.3.6.1.4.1.6296.101.4.13.2.1.1.6 | Integer32 | read-only | Indicates the interval between CCM transmissions |
| I32 sleCfmMdCcPriority | 1.3.6.1.4.1.6296.101.4.13.2.1.1.7 | Integer32 | read-only | Indicates the CCM Priority |
| I32 sleCfmMdCcLossThreshold | 1.3.6.1.4.1.6296.101.4.13.2.1.1.8 | Integer32 | read-only | Indicates the minimum number of CCMs that can be missed before declaring that a MEP is down |
| I32 sleCfmMdCcHoldTime | 1.3.6.1.4.1.6296.101.4.13.2.1.1.9 | Integer32 | read-only | Indicates the time that data of a missing MEP is kept |
| INT sleCfmMdFaultPriority | 1.3.6.1.4.1.6296.101.4.13.2.1.1.10 | INTEGER | read-only | Indicates the lowest priority for fault alarm |
| I32 sleCfmMdFaultKeepTime | 1.3.6.1.4.1.6296.101.4.13.2.1.1.11 | Integer32 | read-only | Indicates the keep time for the fault alarm |
| I32 sleCfmMdFaultClearTime | 1.3.6.1.4.1.6296.101.4.13.2.1.1.12 | Integer32 | read-only | Indicates the clear time for the fault alarm |
| INT sleCfmMdXcheckEnable | 1.3.6.1.4.1.6296.101.4.13.2.1.1.13 | INTEGER | read-only | Enables/Disables CFM cross-check for a specific MEG |
| sleCfmMdControl | 1.3.6.1.4.1.6296.101.4.13.2.2 | |||
| INT sleCfmMdControlRequest | 1.3.6.1.4.1.6296.101.4.13.2.2.1 | INTEGER | read-write | Description. |
| SLE sleCfmMdControlStatus | 1.3.6.1.4.1.6296.101.4.13.2.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleCfmMdControlTimer | 1.3.6.1.4.1.6296.101.4.13.2.2.3 | Gauge32 | read-write | Description. |
| TIK sleCfmMdControlTimeStamp | 1.3.6.1.4.1.6296.101.4.13.2.2.4 | TimeTicks | read-only | Description. |
| SLE sleCfmMdControlReqResult | 1.3.6.1.4.1.6296.101.4.13.2.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleCfmMdControlIndex | 1.3.6.1.4.1.6296.101.4.13.2.2.6 | Integer32 | read-write | Indicates the MD's Index |
| OCT sleCfmMdControlName | 1.3.6.1.4.1.6296.101.4.13.2.2.7 | OCTET STRING | read-write | The MD's name |
| I32 sleCfmMdControlLevel | 1.3.6.1.4.1.6296.101.4.13.2.2.8 | Integer32 | read-write | Indicates the MD's level |
| INT sleCfmMdControlMepEnable | 1.3.6.1.4.1.6296.101.4.13.2.2.9 | INTEGER | read-write | Enables/Disables CFM OAM for MEPs |
| INT sleCfmMdControlCcEnable | 1.3.6.1.4.1.6296.101.4.13.2.2.10 | INTEGER | read-write | Enables/Disables MEPs to send Continuity Check messages |
| I32 sleCfmMdControlCcInterval | 1.3.6.1.4.1.6296.101.4.13.2.2.11 | Integer32 | read-write | Indicates the interval between CCM transmissions |
| I32 sleCfmMdControlCcPriority | 1.3.6.1.4.1.6296.101.4.13.2.2.12 | Integer32 | read-write | Indicates the CCM Priority |
| I32 sleCfmMdControlCcLossThreshold | 1.3.6.1.4.1.6296.101.4.13.2.2.13 | Integer32 | read-write | Indicates the minimum number of CCMs that can be missed before declaring that a MEP is down |
| I32 sleCfmMdControlCcHoldTime | 1.3.6.1.4.1.6296.101.4.13.2.2.14 | Integer32 | read-write | Indicates the time that data of a missing MEP is kept |
| INT sleCfmMdControlFaultPriority | 1.3.6.1.4.1.6296.101.4.13.2.2.15 | INTEGER | read-write | Indicates the lowest priority for fault alarm |
| I32 sleCfmMdControlFaultKeepTime | 1.3.6.1.4.1.6296.101.4.13.2.2.16 | Integer32 | read-write | Indicates the keep time for the fault alarm |
| I32 sleCfmMdControlFaultClearTime | 1.3.6.1.4.1.6296.101.4.13.2.2.17 | Integer32 | read-write | Indicates the clear time for the fault alarm |
| INT sleCfmMdControlXcheckEnable | 1.3.6.1.4.1.6296.101.4.13.2.2.18 | INTEGER | read-write | Enables/Disables CFM cross-check for a specific MEG |
| sleCfmMdNotification | 1.3.6.1.4.1.6296.101.4.13.2.3 | |||
| NTF sleCfmMdCreated | 1.3.6.1.4.1.6296.101.4.13.2.3.1 | createCfmMd | ||
| NTF sleCfmMdDeleted | 1.3.6.1.4.1.6296.101.4.13.2.3.2 | deleteCfmMd | ||
| NTF sleCfmMdMepEnableChanged | 1.3.6.1.4.1.6296.101.4.13.2.3.3 | setCfmMepEnable | ||
| NTF sleCfmMdCcEnableChanged | 1.3.6.1.4.1.6296.101.4.13.2.3.4 | setCfmMdCcEnable | ||
| NTF sleCfmMdCcProfileChanged | 1.3.6.1.4.1.6296.101.4.13.2.3.5 | setCfmMdCcProfile | ||
| NTF sleCfmMdFaultProfileChanged | 1.3.6.1.4.1.6296.101.4.13.2.3.6 | setCfmMdFaultProfile | ||
| NTF sleCfmMdXcheckEnableChanged | 1.3.6.1.4.1.6296.101.4.13.2.3.7 | setCfmMdXcheckEnable | ||
| NTF sleCfmMdErrorDestoryed | 1.3.6.1.4.1.6296.101.4.13.2.3.8 | destroyCfmMdError | ||
| NTF sleCfmMdRmepDestoryed | 1.3.6.1.4.1.6296.101.4.13.2.3.9 | destroyCfmMdRmep | ||
| sleCfmMa | 1.3.6.1.4.1.6296.101.4.13.3 | |||
| sleCfmMaTable | 1.3.6.1.4.1.6296.101.4.13.3.1 | not-accessible | Description. | |
| sleCfmMaEntry | 1.3.6.1.4.1.6296.101.4.13.3.1.1 | not-accessible | Description. | |
| I32 sleCfmMaIndex | 1.3.6.1.4.1.6296.101.4.13.3.1.1.1 | Integer32 | read-only | Indicates the MA's Index |
| OCT sleCfmMaName | 1.3.6.1.4.1.6296.101.4.13.3.1.1.2 | OCTET STRING | read-only | The MA's name |
| I32 sleCfmMaVid | 1.3.6.1.4.1.6296.101.4.13.3.1.1.3 | Integer32 | read-only | Indicates the MA's VID |
| INT sleCfmMaMepEnable | 1.3.6.1.4.1.6296.101.4.13.3.1.1.4 | INTEGER | read-only | Enables/Disables CFM OAM for MEPs |
| INT sleCfmMaCcEnable | 1.3.6.1.4.1.6296.101.4.13.3.1.1.5 | INTEGER | read-only | Enables/Disables MEPs to send Continuity Check messages |
| I32 sleCfmMaCcInterval | 1.3.6.1.4.1.6296.101.4.13.3.1.1.6 | Integer32 | read-only | Indicates the interval between CCM transmissions |
| I32 sleCfmMaCcPriority | 1.3.6.1.4.1.6296.101.4.13.3.1.1.7 | Integer32 | read-only | Indicates the CCM Priority |
| I32 sleCfmMaCcLossThreshold | 1.3.6.1.4.1.6296.101.4.13.3.1.1.8 | Integer32 | read-only | Indicates the minimum number of CCMs that can be missed before declaring that a MEP is down |
| INT sleCfmMaCcFaultPriority | 1.3.6.1.4.1.6296.101.4.13.3.1.1.9 | INTEGER | read-only | Indicates the lowest priority for fault alarm |
| I32 sleCfmMaCcFaultKeepTime | 1.3.6.1.4.1.6296.101.4.13.3.1.1.10 | Integer32 | read-only | Indicates the keep time for the fault alarm |
| I32 sleCfmMaCcFaultClearTime | 1.3.6.1.4.1.6296.101.4.13.3.1.1.11 | Integer32 | read-only | Indicates the clear time for the fault alarm |
| INT sleCfmMaXcheckEnable | 1.3.6.1.4.1.6296.101.4.13.3.1.1.12 | INTEGER | read-only | Enables/Disables CFM cross-check for a specific MEG |
| sleCfmMaControl | 1.3.6.1.4.1.6296.101.4.13.3.2 | |||
| INT sleCfmMaControlRequest | 1.3.6.1.4.1.6296.101.4.13.3.2.1 | INTEGER | read-write | Description. |
| SLE sleCfmMaControlStatus | 1.3.6.1.4.1.6296.101.4.13.3.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleCfmMaControlTimer | 1.3.6.1.4.1.6296.101.4.13.3.2.3 | Gauge32 | read-write | Description. |
| TIK sleCfmMaControlTimeStamp | 1.3.6.1.4.1.6296.101.4.13.3.2.4 | TimeTicks | read-only | Description. |
| SLE sleCfmMaControlReqResult | 1.3.6.1.4.1.6296.101.4.13.3.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleCfmMaControlIndex | 1.3.6.1.4.1.6296.101.4.13.3.2.6 | Integer32 | read-write | Indicates the MA's Index |
| OCT sleCfmMaControlName | 1.3.6.1.4.1.6296.101.4.13.3.2.7 | OCTET STRING | read-write | The MA's name. |
| I32 sleCfmMaControlVid | 1.3.6.1.4.1.6296.101.4.13.3.2.8 | Integer32 | read-write | Indicates the MA's VID |
| I32 sleCfmMaControlMdIndex | 1.3.6.1.4.1.6296.101.4.13.3.2.9 | Integer32 | read-write | Indicates the MD's Index |
| INT sleCfmMaControlMepEnable | 1.3.6.1.4.1.6296.101.4.13.3.2.10 | INTEGER | read-write | Enables/Disables CFM OAM for MEPs |
| INT sleCfmMaControlCcEnable | 1.3.6.1.4.1.6296.101.4.13.3.2.11 | INTEGER | read-write | Enables/Disables MEPs to send Continuity Check messages |
| I32 sleCfmMaControlCcInterval | 1.3.6.1.4.1.6296.101.4.13.3.2.12 | Integer32 | read-write | Indicates the interval between CCM transmissions |
| I32 sleCfmMaControlCcPriority | 1.3.6.1.4.1.6296.101.4.13.3.2.13 | Integer32 | read-write | Indicates the CCM Priority |
| I32 sleCfmMaControlCcLossThreshold | 1.3.6.1.4.1.6296.101.4.13.3.2.14 | Integer32 | read-write | Indicates the minimum number of CCMs that can be missed before declaring that a MEP is down |
| INT sleCfmMaControlFaultPriority | 1.3.6.1.4.1.6296.101.4.13.3.2.15 | INTEGER | read-write | Indicates the lowest priority for fault alarm |
| I32 sleCfmMaControlFaultKeepTime | 1.3.6.1.4.1.6296.101.4.13.3.2.16 | Integer32 | read-write | Indicates the keep time for the fault alarm |
| I32 sleCfmMaControlFaultClearTime | 1.3.6.1.4.1.6296.101.4.13.3.2.17 | Integer32 | read-write | Indicates the clear time for the fault alarm |
| INT sleCfmMaControlXcheckEnable | 1.3.6.1.4.1.6296.101.4.13.3.2.18 | INTEGER | read-write | Enables/Disables CFM cross-check for a specific MEG |
| sleCfmMaNotification | 1.3.6.1.4.1.6296.101.4.13.3.3 | |||
| NTF sleCfmMaCreated | 1.3.6.1.4.1.6296.101.4.13.3.3.1 | createCfmMa | ||
| NTF sleCfmMaDeleted | 1.3.6.1.4.1.6296.101.4.13.3.3.2 | deleteCfmMa | ||
| NTF sleCfmMaMepEnableChanged | 1.3.6.1.4.1.6296.101.4.13.3.3.3 | setCfmMaMepEnable | ||
| NTF sleCfmMaCcEnableChanged | 1.3.6.1.4.1.6296.101.4.13.3.3.4 | setCfmMaCcEnable | ||
| NTF sleCfmMaCcProfileChanged | 1.3.6.1.4.1.6296.101.4.13.3.3.5 | setCfmMaCcProfile | ||
| NTF sleCfmMaFaultProfileChanged | 1.3.6.1.4.1.6296.101.4.13.3.3.6 | setCfmMaFaultProfile | ||
| NTF sleCfmMaXcheckEnableChanged | 1.3.6.1.4.1.6296.101.4.13.3.3.7 | setCfmMaXcheckEnable | ||
| sleCfmMep | 1.3.6.1.4.1.6296.101.4.13.4 | |||
| sleCfmMepTable | 1.3.6.1.4.1.6296.101.4.13.4.1 | not-accessible | Description. | |
| sleCfmMepEntry | 1.3.6.1.4.1.6296.101.4.13.4.1.1 | not-accessible | Description. | |
| I32 sleCfmMepIdentifier | 1.3.6.1.4.1.6296.101.4.13.4.1.1.1 | Integer32 | read-only | MEP Id |
| I32 sleCfmMepIfIndex | 1.3.6.1.4.1.6296.101.4.13.4.1.1.2 | Integer32 | read-only | Brige Port Index whitch the MEP is attached |
| INT sleCfmMepDirection | 1.3.6.1.4.1.6296.101.4.13.4.1.1.3 | INTEGER | read-only | The direction in which the MEP faces on the Bridge port |
| INT sleCfmMepEnable | 1.3.6.1.4.1.6296.101.4.13.4.1.1.4 | INTEGER | read-only | Administrative state of the MEP |
| INT sleCfmMepFngState | 1.3.6.1.4.1.6296.101.4.13.4.1.1.5 | INTEGER | read-only | Current state of the MEP Fault Notification Generator State Machine |
| INT sleCfmMepCcEnable | 1.3.6.1.4.1.6296.101.4.13.4.1.1.6 | INTEGER | read-only | If set to true, the MEP will generate CCM messages |
| OCT sleCfmMepMacAddress | 1.3.6.1.4.1.6296.101.4.13.4.1.1.7 | OCTET STRING | read-only | MAC address of the MEP |
| I32 sleCfmMepCcPriority | 1.3.6.1.4.1.6296.101.4.13.4.1.1.8 | Integer32 | read-only | Indicates the CCM Priority |
| INT sleCfmMepFaultPriority | 1.3.6.1.4.1.6296.101.4.13.4.1.1.9 | INTEGER | read-only | An integer value specifying the lowest priority defect that is allowed to generate fault alarm |
| I32 sleCfmMepFaultKeepTime | 1.3.6.1.4.1.6296.101.4.13.4.1.1.10 | Integer32 | read-only | The time that defects must be present before a Fault Alarm is issued |
| I32 sleCfmMepFaultClearTime | 1.3.6.1.4.1.6296.101.4.13.4.1.1.11 | Integer32 | read-only | The time that defects must be absent before resetting a Fault Alarm |
| INT sleCfmMepHighestPrDefect | 1.3.6.1.4.1.6296.101.4.13.4.1.1.12 | INTEGER | read-only | The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state |
| BIT sleCfmMepDefects | 1.3.6.1.4.1.6296.101.4.13.4.1.1.13 | Bits | read-only | A vector of Boolean defect conditions |
| C32 sleCfmMepCciSentCcms | 1.3.6.1.4.1.6296.101.4.13.4.1.1.14 | Counter32 | read-only | Total number of Continuity Check messages transmitted |
| I32 sleCfmMepNextLbmTransId | 1.3.6.1.4.1.6296.101.4.13.4.1.1.15 | Integer32 | read-only | Next sequence number/transaction identifier to be sent in a Loopback message |
| C32 sleCfmMepLbrIn | 1.3.6.1.4.1.6296.101.4.13.4.1.1.16 | Counter32 | read-only | Total number of valid, in-order Loopback Replies received |
| C32 sleCfmMepLbrInOutOfOrder | 1.3.6.1.4.1.6296.101.4.13.4.1.1.17 | Counter32 | read-only | The total number of valid, out-of-order Loopback Replies received |
| I32 sleCfmMepLtmNextSeqNumber | 1.3.6.1.4.1.6296.101.4.13.4.1.1.18 | Integer32 | read-only | Next transaction identifier/sequence number to be sent in a Linktrace message. |
| C32 sleCfmMepUnexpLtrIn | 1.3.6.1.4.1.6296.101.4.13.4.1.1.19 | Counter32 | read-only | The total number of unexpected LTRs received |
| sleCfmMepControl | 1.3.6.1.4.1.6296.101.4.13.4.2 | |||
| INT sleCfmMepControlRequest | 1.3.6.1.4.1.6296.101.4.13.4.2.1 | INTEGER | read-write | Description. |
| SLE sleCfmMepControlStatus | 1.3.6.1.4.1.6296.101.4.13.4.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleCfmMepControlTimer | 1.3.6.1.4.1.6296.101.4.13.4.2.3 | Gauge32 | read-write | Description. |
| TIK sleCfmMepControlTimeStamp | 1.3.6.1.4.1.6296.101.4.13.4.2.4 | TimeTicks | read-only | Description. |
| SLE sleCfmMepControlReqResult | 1.3.6.1.4.1.6296.101.4.13.4.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleCfmMepControlIdentifier | 1.3.6.1.4.1.6296.101.4.13.4.2.6 | Integer32 | read-write | MEP Id |
| I32 sleCfmMepControlMdIndex | 1.3.6.1.4.1.6296.101.4.13.4.2.7 | Integer32 | read-write | A index of MD table |
| I32 sleCfmMepControlMaIndex | 1.3.6.1.4.1.6296.101.4.13.4.2.8 | Integer32 | read-write | The MA's Index |
| I32 sleCfmMepControlIfIndex | 1.3.6.1.4.1.6296.101.4.13.4.2.9 | Integer32 | read-write | Bridge Port Index whitch the MEP is attached |
| INT sleCfmMepControlDirection | 1.3.6.1.4.1.6296.101.4.13.4.2.10 | INTEGER | read-write | The direction in which the MEP faces on the Bridge port |
| INT sleCfmMepControlEnable | 1.3.6.1.4.1.6296.101.4.13.4.2.11 | INTEGER | read-write | Administrative state of the MEP |
| INT sleCfmMepControlCcEnable | 1.3.6.1.4.1.6296.101.4.13.4.2.12 | INTEGER | read-write | If set to true, the MEP will generate CCM messages |
| I32 sleCfmMepControlCcPriority | 1.3.6.1.4.1.6296.101.4.13.4.2.13 | Integer32 | read-write | Indicates the CCM Priority |
| INT sleCfmMepControlFaultPriority | 1.3.6.1.4.1.6296.101.4.13.4.2.14 | INTEGER | read-write | An integer value specifying the lowest priority defect that is allowed to generate fault alarm |
| I32 sleCfmMepControlFaultKeepTime | 1.3.6.1.4.1.6296.101.4.13.4.2.15 | Integer32 | read-write | The time that defects must be present before a Fault Alarm is issued |
| I32 sleCfmMepControlFaultClearTime | 1.3.6.1.4.1.6296.101.4.13.4.2.16 | Integer32 | read-write | The time that defects must be absent before resetting a Fault Alarm |
| OCT sleCfmMepControlTransmitLbmDestMacAddress | 1.3.6.1.4.1.6296.101.4.13.4.2.17 | OCTET STRING | read-write | The Target MAC Address Field to be transmitted |
| I32 sleCfmMepControlTransmitLbmDestMepId | 1.3.6.1.4.1.6296.101.4.13.4.2.18 | Integer32 | read-write | The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent |
| INT sleCfmMepControlTransmitLbmDestIsMepId | 1.3.6.1.4.1.6296.101.4.13.4.2.19 | INTEGER | read-write | True indicates that MEPID of the target MEP is used for Loopback transmission |
| I32 sleCfmMepControlTransmitLbmCount | 1.3.6.1.4.1.6296.101.4.13.4.2.20 | Integer32 | read-write | The number of Loopback messages to be transmitted |
| I32 sleCfmMepControlTransmitLbmInterval | 1.3.6.1.4.1.6296.101.4.13.4.2.21 | Integer32 | read-write | Indicates the interval for sending LBM |
| I32 sleCfmMepControlTransmitLbmTimeout | 1.3.6.1.4.1.6296.101.4.13.4.2.22 | Integer32 | read-write | Indicates the waiting time for receiving the expected LBR |
| I32 sleCfmMepControlTransmitLbmPriority | 1.3.6.1.4.1.6296.101.4.13.4.2.23 | Integer32 | read-write | Priority. 3 bit value to be used in the VLAN tag |
| OCT sleCfmMepControlTransmitLtmTargetMacAddress | 1.3.6.1.4.1.6296.101.4.13.4.2.24 | OCTET STRING | read-write | The Target MAC Address Field to be transmitted: A unicast destination MAC address. |
| I32 sleCfmMepControlTransmitLtmTargetMepId | 1.3.6.1.4.1.6296.101.4.13.4.2.25 | Integer32 | read-write | An indication of the Target MAC Address Field to be transmitted |
| INT sleCfmMepControlTransmitLtmTargetIsMepId | 1.3.6.1.4.1.6296.101.4.13.4.2.26 | INTEGER | read-write | True indicates that MEPID of the target MEP is used for Linktrace transmission. |
| BIT sleCfmMepControlTransmitLtmFlags | 1.3.6.1.4.1.6296.101.4.13.4.2.27 | Bits | read-write | The flags field for LTMs transmitted by the MEP |
| I32 sleCfmMepControlTransmitLtmTtl | 1.3.6.1.4.1.6296.101.4.13.4.2.28 | Integer32 | read-write | The LTM TTL field |
| sleCfmMepNotification | 1.3.6.1.4.1.6296.101.4.13.4.3 | |||
| NTF sleCfmMepCreated | 1.3.6.1.4.1.6296.101.4.13.4.3.1 | createCfmMep | ||
| NTF sleCfmMepDeleted | 1.3.6.1.4.1.6296.101.4.13.4.3.2 | deleteCfmMep | ||
| NTF sleCfmMepEnableChanged | 1.3.6.1.4.1.6296.101.4.13.4.3.3 | setCfmMepEnable | ||
| NTF sleCfmMepCcEnableChanged | 1.3.6.1.4.1.6296.101.4.13.4.3.4 | setCfmMepCcEnable | ||
| NTF sleCfmMepCcProfileChanged | 1.3.6.1.4.1.6296.101.4.13.4.3.5 | setCfmMepCcProfile | ||
| NTF sleCfmMepFaultProfileChanged | 1.3.6.1.4.1.6296.101.4.13.4.3.6 | setCfmMepFaultProfile | ||
| sleCfmMip | 1.3.6.1.4.1.6296.101.4.13.5 | |||
| sleCfmMipTable | 1.3.6.1.4.1.6296.101.4.13.5.1 | not-accessible | Description. | |
| sleCfmMipEntry | 1.3.6.1.4.1.6296.101.4.13.5.1.1 | not-accessible | Description. | |
| I32 sleCfmMipPort | 1.3.6.1.4.1.6296.101.4.13.5.1.1.1 | Integer32 | read-only | Indicates the port number |
| I32 sleCfmMipLevel | 1.3.6.1.4.1.6296.101.4.13.5.1.1.2 | Integer32 | read-only | Indicates the MIP's level |
| INT sleCfmMipType | 1.3.6.1.4.1.6296.101.4.13.5.1.1.3 | INTEGER | read-only | Indicate the MIPs type |
| sleCfmMipControl | 1.3.6.1.4.1.6296.101.4.13.5.2 | |||
| INT sleCfmMipControlRequest | 1.3.6.1.4.1.6296.101.4.13.5.2.1 | INTEGER | read-write | Description. |
| SLE sleCfmMipControlStatus | 1.3.6.1.4.1.6296.101.4.13.5.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleCfmMipControlTimer | 1.3.6.1.4.1.6296.101.4.13.5.2.3 | Gauge32 | read-write | Description. |
| TIK sleCfmMipControlTimeStamp | 1.3.6.1.4.1.6296.101.4.13.5.2.4 | TimeTicks | read-only | Description. |
| SLE sleCfmMipControlReqResult | 1.3.6.1.4.1.6296.101.4.13.5.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleCfmMipControlPort | 1.3.6.1.4.1.6296.101.4.13.5.2.6 | Integer32 | read-write | Indicates the port number |
| I32 sleCfmMipControlLevel | 1.3.6.1.4.1.6296.101.4.13.5.2.7 | Integer32 | read-write | Indicates the MIP's level |
| sleCfmMipNotification | 1.3.6.1.4.1.6296.101.4.13.5.3 | |||
| NTF sleCfmMipCreated | 1.3.6.1.4.1.6296.101.4.13.5.3.1 | createCfmMip | ||
| NTF sleCfmMipDeleted | 1.3.6.1.4.1.6296.101.4.13.5.3.2 | deleteCfmMip | ||
| sleCfmXcheck | 1.3.6.1.4.1.6296.101.4.13.6 | |||
| sleCfmXcheckTable | 1.3.6.1.4.1.6296.101.4.13.6.1 | not-accessible | Description. | |
| sleCfmXcheckEntry | 1.3.6.1.4.1.6296.101.4.13.6.1.1 | not-accessible | Description. | |
| I32 sleCfmXcheckMepIdentifier | 1.3.6.1.4.1.6296.101.4.13.6.1.1.1 | Integer32 | read-only | Indicates the remote MEP's Id |
| INT sleCfmXcheckMepState | 1.3.6.1.4.1.6296.101.4.13.6.1.1.2 | INTEGER | read-only | Indicates the cross-check MEPs state |
| sleCfmXcheckControl | 1.3.6.1.4.1.6296.101.4.13.6.2 | |||
| INT sleCfmXcheckControlRequest | 1.3.6.1.4.1.6296.101.4.13.6.2.1 | INTEGER | read-write | Description. |
| SLE sleCfmXcheckControlStatus | 1.3.6.1.4.1.6296.101.4.13.6.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleCfmXcheckControlTimer | 1.3.6.1.4.1.6296.101.4.13.6.2.3 | Gauge32 | read-write | Description. |
| TIK sleCfmXcheckControlTimeStamp | 1.3.6.1.4.1.6296.101.4.13.6.2.4 | TimeTicks | read-only | Description. |
| SLE sleCfmXcheckControlReqResult | 1.3.6.1.4.1.6296.101.4.13.6.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleCfmXcheckControlMepIdentifier | 1.3.6.1.4.1.6296.101.4.13.6.2.6 | Integer32 | read-write | Indicates the remote MEP's Id |
| I32 sleCfmXcheckControlMdIndex | 1.3.6.1.4.1.6296.101.4.13.6.2.7 | Integer32 | read-write | Indicates the MDs Index |
| I32 sleCfmXcheckControlMaIndex | 1.3.6.1.4.1.6296.101.4.13.6.2.8 | Integer32 | read-write | Indicates the MA's Index |
| sleCfmXcheckNotification | 1.3.6.1.4.1.6296.101.4.13.6.3 | |||
| NTF sleCfmXcheckMepCreated | 1.3.6.1.4.1.6296.101.4.13.6.3.1 | createCfmXcheckMep | ||
| NTF sleCfmXcheckMepDeleted | 1.3.6.1.4.1.6296.101.4.13.6.3.2 | deleteCfmXcheckMep | ||
| sleCfmRmep | 1.3.6.1.4.1.6296.101.4.13.7 | |||
| sleCfmRmepTable | 1.3.6.1.4.1.6296.101.4.13.7.1 | not-accessible | Description. | |
| sleCfmRmepEntry | 1.3.6.1.4.1.6296.101.4.13.7.1.1 | not-accessible | Description. | |
| I32 sleCfmRmepIdentifier | 1.3.6.1.4.1.6296.101.4.13.7.1.1.1 | Integer32 | read-only | Indicates the remote MEP's Id |
| INT sleCfmRmepState | 1.3.6.1.4.1.6296.101.4.13.7.1.1.2 | INTEGER | read-only | Indicates the operational state of the remote MEP State machines |
| OCT sleCfmRmepMacAddress | 1.3.6.1.4.1.6296.101.4.13.7.1.1.3 | OCTET STRING | read-only | Indicates the MAC address of the remote MEP |
| I32 sleCfmRmepIfIndex | 1.3.6.1.4.1.6296.101.4.13.7.1.1.4 | Integer32 | read-only | Indicates the port number of the remote MEP |
| INT sleCfmRmepRdi | 1.3.6.1.4.1.6296.101.4.13.7.1.1.5 | INTEGER | read-only | Indicates State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received |
| INT sleCfmRmepPortStatus | 1.3.6.1.4.1.6296.101.4.13.7.1.1.6 | INTEGER | read-only | Indicates the Port status of the remote MEP |
| INT sleCfmRmepInterfaceStatus | 1.3.6.1.4.1.6296.101.4.13.7.1.1.7 | INTEGER | read-only | Indicates the interface status of the remote MEP |
| sleCfmLtr | 1.3.6.1.4.1.6296.101.4.13.8 | |||
| sleCfmLtrTable | 1.3.6.1.4.1.6296.101.4.13.8.1 | not-accessible | Description. | |
| sleCfmLtrEntry | 1.3.6.1.4.1.6296.101.4.13.8.1.1 | not-accessible | Description. | |
| I32 sleCfmLtrSeqNumber | 1.3.6.1.4.1.6296.101.4.13.8.1.1.1 | Integer32 | read-only | Indicates the LTM Transaction Identifier returned from a previous Transmit Linktrace Message command, indicating the LTM entry to which the LTR entries will be attached |
| I32 sleCfmLtrReceiveOrder | 1.3.6.1.4.1.6296.101.4.13.8.1.1.2 | Integer32 | read-only | Indicates an index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value |
| I32 sleCfmLtrTtl | 1.3.6.1.4.1.6296.101.4.13.8.1.1.3 | Integer32 | read-only | Indicates TTL field value for a returned LTR. |
| INT sleCfmLtrForwarded | 1.3.6.1.4.1.6296.101.4.13.8.1.1.4 | INTEGER | read-only | Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field. |
| INT sleCfmLtrTerminalMep | 1.3.6.1.4.1.6296.101.4.13.8.1.1.5 | INTEGER | read-only | Indicates a boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field. |
| OCT sleCfmLtrLastEgressIdentifier | 1.3.6.1.4.1.6296.101.4.13.8.1.1.6 | OCTET STRING | read-only | Identifies the MEP Linktrace Initiator that originated, or the Linktrace Responder that forwarded, the LTM to which this LTR is the response |
| OCT sleCfmLtrNextEgressIdentifier | 1.3.6.1.4.1.6296.101.4.13.8.1.1.7 | OCTET STRING | read-only | Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM to the next hop. |
| INT sleCfmLtrRelay | 1.3.6.1.4.1.6296.101.4.13.8.1.1.8 | INTEGER | read-only | Indicates the value returned in the Ingress Action Field of the LTM |
| INT sleCfmLtrIngress | 1.3.6.1.4.1.6296.101.4.13.8.1.1.9 | INTEGER | read-only | Indicates the value returned in the Ingress Action Field of the LTM |
| OCT sleCfmLtrIngressMac | 1.3.6.1.4.1.6296.101.4.13.8.1.1.10 | OCTET STRING | read-only | Indicates MAC address returned in the ingress MAC address field. |
| I32 sleCfmLtrIngressPort | 1.3.6.1.4.1.6296.101.4.13.8.1.1.11 | Integer32 | read-only | Indicates Ingress Port ID |
| INT sleCfmLtrEgress | 1.3.6.1.4.1.6296.101.4.13.8.1.1.12 | INTEGER | read-only | Indicates the value returned in the Egress Action Field of the LTM |
| OCT sleCfmLtrEgressMac | 1.3.6.1.4.1.6296.101.4.13.8.1.1.13 | OCTET STRING | read-only | Indicates MAC address returned in the egress MAC address field. |
| I32 sleCfmLtrEgressPort | 1.3.6.1.4.1.6296.101.4.13.8.1.1.14 | Integer32 | read-only | Indicates Egress Port ID |
| sleCfmConfigError | 1.3.6.1.4.1.6296.101.4.13.9 | |||
| sleCfmConfigErrorTable | 1.3.6.1.4.1.6296.101.4.13.9.1 | not-accessible | Description. | |
| sleCfmConfigErrorEntry | 1.3.6.1.4.1.6296.101.4.13.9.1.1 | not-accessible | Description. | |
| I32 sleCfmConfigErrorVid | 1.3.6.1.4.1.6296.101.4.13.9.1.1.1 | Integer32 | read-only | Indicates the Configuration Error VLAN Identifier |
| I32 sleCfmConfigErrorIfIndex | 1.3.6.1.4.1.6296.101.4.13.9.1.1.2 | Integer32 | read-only | Indicates the Configuration Error Port Number |
| BIT sleCfmConfigErrorType | 1.3.6.1.4.1.6296.101.4.13.9.1.1.3 | Bits | read-only | Indicates the Configuration Error Type |
| sleCfmMipCcdb | 1.3.6.1.4.1.6296.101.4.13.10 | |||
| sleCfmMipCcdbTable | 1.3.6.1.4.1.6296.101.4.13.10.1 | not-accessible | Description. | |
| sleCfmMipCcdbEntry | 1.3.6.1.4.1.6296.101.4.13.10.1.1 | not-accessible | Description. | |
| I32 sleCfmMipCcdbIndex | 1.3.6.1.4.1.6296.101.4.13.10.1.1.1 | Integer32 | read-only | Indicates the MIP CCDB's Index |
| I32 sleCfmMipCcdbVlanId | 1.3.6.1.4.1.6296.101.4.13.10.1.1.2 | Integer32 | read-only | VLAN Id |
| OCT sleCfmMipCcdbMacAddr | 1.3.6.1.4.1.6296.101.4.13.10.1.1.3 | OCTET STRING | read-only | Indicates MAC address of the remote MEP |
| I32 sleCfmMipCcdbPort | 1.3.6.1.4.1.6296.101.4.13.10.1.1.4 | Integer32 | read-only | Indicates the Port number that the CCM output |
| OCT sleCfmMipCcdbKeepTime | 1.3.6.1.4.1.6296.101.4.13.10.1.1.5 | OCTET STRING | read-only | Indicates an up-date time of a entry |
| sleEMLog | 1.3.6.1.4.1.6296.101.4.14 | |||
| sleEMLogInfo | 1.3.6.1.4.1.6296.101.4.14.1 | |||
| INT sleEMLogDisableStatus | 1.3.6.1.4.1.6296.101.4.14.1.1 | INTEGER | read-only | EM log disable. |
| BIT sleEMLogAction | 1.3.6.1.4.1.6296.101.4.14.1.2 | Bits | read-only | Generate syslog message or SNMP Trap or take a recover action |
| INT sleEMLogInterval | 1.3.6.1.4.1.6296.101.4.14.1.3 | INTEGER | read-only | Action interval in minute (Default. 3 mins) |
| INT sleEMLogNAKLockStatus | 1.3.6.1.4.1.6296.101.4.14.1.4 | INTEGER | read-only | The status of emlog nak-locking |
| INT sleEMLogNakCompensate | 1.3.6.1.4.1.6296.101.4.14.1.5 | INTEGER | read-only | The status of emlog nak-compensate (shadow recovery) |
| INT sleEMLogRecoverActionMemLow | 1.3.6.1.4.1.6296.101.4.14.1.6 | INTEGER | read-only | Indicate recover action of memory low |
| INT sleEMLogRecoverActionNak | 1.3.6.1.4.1.6296.101.4.14.1.7 | INTEGER | read-only | Indicate recover action of NAK error |
| sleEMLogControl | 1.3.6.1.4.1.6296.101.4.14.2 | |||
| INT sleEMLogControlRequest | 1.3.6.1.4.1.6296.101.4.14.2.1 | INTEGER | read-write | This attribute identifies the control commands. updateAlarmList: the NE updates entries of alarms in the sleAlarmListTable after having changed alarm severities of alarms (due to change profile pointers in managed entities or after modification of alarm severities in profiles). This command should be applied once after having finisled modifications of severties. modifyAlarmSeverity: modifies the severity of an alarm in specific profile. createAlarmSeverityProfile: creates a new profile with default severities. The severities then have to be modified with command changeAlarmSeverity. deleteAlarmSeverityProfile: deletes a profile. Profile 1 is not allowed to be deleted. Notifications : none |
| SLE sleEMLogControlStatus | 1.3.6.1.4.1.6296.101.4.14.2.2 | SleControlStatusType | read-only | The status of a control request. |
| G32 sleEMLogControlTimer | 1.3.6.1.4.1.6296.101.4.14.2.3 | Gauge32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleEMLogControlTimeStamp | 1.3.6.1.4.1.6296.101.4.14.2.4 | TimeTicks | read-only | The time stamp of the last command (end of command). |
| SLE sleEMLogControlReqResult | 1.3.6.1.4.1.6296.101.4.14.2.5 | SleControlRequestResultType | read-only | The result of the last user command. |
| INT sleEMLogControlDisableStatus | 1.3.6.1.4.1.6296.101.4.14.2.6 | INTEGER | read-write | EM log disable. |
| BIT sleEMLogControlAction | 1.3.6.1.4.1.6296.101.4.14.2.7 | Bits | read-write | Generate syslog message or SNMP trap. |
| INT sleEMLogControlInterval | 1.3.6.1.4.1.6296.101.4.14.2.8 | INTEGER | read-write | Action interval in minute (Default. 3 mins) |
| INT sleEMLogControlNAKLockStatus | 1.3.6.1.4.1.6296.101.4.14.2.9 | INTEGER | read-write | The status of emlog nak-locking |
| INT sleEMLogControlNAKCompensate | 1.3.6.1.4.1.6296.101.4.14.2.10 | INTEGER | read-write | The status of emlog nak-compensate (shadow recovery) |
| INT sleEMLogControlRecoverActionMemLow | 1.3.6.1.4.1.6296.101.4.14.2.11 | INTEGER | read-write | Indicate recover action of memory low |
| INT sleEMLogControlRecoverActionNAK | 1.3.6.1.4.1.6296.101.4.14.2.12 | INTEGER | read-write | Indicate recover action of NAK error |
| sleEMLogNotification | 1.3.6.1.4.1.6296.101.4.14.3 | |||
| NTF sleEMLogDisableStatusChanged | 1.3.6.1.4.1.6296.101.4.14.3.1 | Description. | ||
| NTF sleEMLogActionChanged | 1.3.6.1.4.1.6296.101.4.14.3.2 | Description. | ||
| NTF sleEMLogIntervalChanged | 1.3.6.1.4.1.6296.101.4.14.3.3 | Description. | ||
| NTF sleEMLogNAKLockChanged | 1.3.6.1.4.1.6296.101.4.14.3.4 | Description. | ||
| NTF sleEMLogNAKCompensateChanged | 1.3.6.1.4.1.6296.101.4.14.3.5 | Description. | ||
| NTF sleEMLogRecoverActionMemLowChanged | 1.3.6.1.4.1.6296.101.4.14.3.6 | Description. | ||
| NTF sleEMLogRecoverActionNAKChanged | 1.3.6.1.4.1.6296.101.4.14.3.7 | Description. | ||
| sleEMLogDefectInfo | 1.3.6.1.4.1.6296.101.4.14.4 | |||
| BIT sleEMLogDefectCPUHigh | 1.3.6.1.4.1.6296.101.4.14.4.1 | Bits | read-only | The CPU high defection information. |
| BIT sleEMLogTemperHigh | 1.3.6.1.4.1.6296.101.4.14.4.2 | Bits | read-only | The temperature hish defection information. |
| BIT sleEMLogTemperLow | 1.3.6.1.4.1.6296.101.4.14.4.3 | Bits | read-only | The temperature low defection information. |
| BIT sleEMLogMemLow | 1.3.6.1.4.1.6296.101.4.14.4.4 | Bits | read-only | The memory low defection information. |
| BIT sleEMLogFanFail | 1.3.6.1.4.1.6296.101.4.14.4.5 | Bits | read-only | The fan failure defection information. |
| BIT sleEMLogPhyCRCFail | 1.3.6.1.4.1.6296.101.4.14.4.6 | Bits | read-only | The PHY CRC failure defection information. |
| BIT sleEMLogPhyDetectFail | 1.3.6.1.4.1.6296.101.4.14.4.7 | Bits | read-only | The PHY detection failure defection information. |
| BIT sleEMLogSFUMateInitFail | 1.3.6.1.4.1.6296.101.4.14.4.8 | Bits | read-only | The SFU mate init failure defection information |
| BIT sleEMLogDaemonHealthBad | 1.3.6.1.4.1.6296.101.4.14.4.9 | Bits | read-only | The daemon health bad defection information. |
| BIT sleEMLogGPIURavenLinkDown | 1.3.6.1.4.1.6296.101.4.14.4.10 | Bits | read-only | The GPIU raven link down defection information. |
| BIT sleEMLogFANRPMLow | 1.3.6.1.4.1.6296.101.4.14.4.11 | Bits | read-only | The FAN RPM Low defection information. |
| BIT sleEMLogNAK | 1.3.6.1.4.1.6296.101.4.14.4.12 | Bits | read-only | The NAK Error defection information. |
| sleRapsRing | 1.3.6.1.4.1.6296.101.4.15 | |||
| sleRapsRingTable | 1.3.6.1.4.1.6296.101.4.15.1 | not-accessible | Description. | |
| sleRapsRingEntry | 1.3.6.1.4.1.6296.101.4.15.1.1 | not-accessible | Description. | |
| I32 sleRapsRingId | 1.3.6.1.4.1.6296.101.4.15.1.1.1 | Integer32 | read-only | Indicates the Rings ID |
| INT sleRapsRingType | 1.3.6.1.4.1.6296.101.4.15.1.1.2 | INTEGER | read-only | Indicates the Rings type |
| INT sleRapsRingLevel | 1.3.6.1.4.1.6296.101.4.15.1.1.3 | INTEGER | read-only | Indicates the Rings level |
| INT sleRapsRingCtrlVlan | 1.3.6.1.4.1.6296.101.4.15.1.1.4 | INTEGER | read-only | Indicates the Ring Nodes control-vlan |
| OCT sleRapsRingTrafficVlans | 1.3.6.1.4.1.6296.101.4.15.1.1.5 | OCTET STRING | read-only | Indicates the Ring Nodes traffic-vlans |
| INT sleRapsRingVirtualVlan | 1.3.6.1.4.1.6296.101.4.15.1.1.6 | INTEGER | read-only | Indicates the Ring Node's virtual-vlan |
| OCT sleRapsRingNodeId | 1.3.6.1.4.1.6296.101.4.15.1.1.7 | OCTET STRING | read-only | Indicates the Ring Nodes ID |
| INT sleRapsRingEnable | 1.3.6.1.4.1.6296.101.4.15.1.1.8 | INTEGER | read-only | Enables/Disables Ring Node |
| INT sleRapsRingBridgeRole | 1.3.6.1.4.1.6296.101.4.15.1.1.9 | INTEGER | read-only | Indicates the Ring Nodes Role |
| INT sleRapsRingState | 1.3.6.1.4.1.6296.101.4.15.1.1.10 | INTEGER | read-only | Indicates the Ring Nodes State |
| I32 sleRapsRingEastPort | 1.3.6.1.4.1.6296.101.4.15.1.1.11 | Integer32 | read-only | Indicates the Ring Nodes east port |
| INT sleRapsRingEastPortStatus | 1.3.6.1.4.1.6296.101.4.15.1.1.12 | INTEGER | read-only | Indicates the port status of east port |
| I32 sleRapsRingWestPort | 1.3.6.1.4.1.6296.101.4.15.1.1.13 | Integer32 | read-only | Indicates the Ring Nodes west port |
| INT sleRapsRingWestPortStatus | 1.3.6.1.4.1.6296.101.4.15.1.1.14 | INTEGER | read-only | Indicates the port status of west port |
| INT sleRapsRingRplPort | 1.3.6.1.4.1.6296.101.4.15.1.1.15 | INTEGER | read-only | Indicates the Rings RPL port |
| INT sleRapsRingIcPort | 1.3.6.1.4.1.6296.101.4.15.1.1.16 | INTEGER | read-only | Indicates the Rings interconnection port |
| INT sleRapsRingIcNode | 1.3.6.1.4.1.6296.101.4.15.1.1.17 | INTEGER | read-only | Indicates the primary/secondary node for the minimization of the segmentation |
| INT sleRapsRingMultipleFailure | 1.3.6.1.4.1.6296.101.4.15.1.1.18 | INTEGER | read-only | The multiple failure mode |
| INT sleRapsRingPropagateTc | 1.3.6.1.4.1.6296.101.4.15.1.1.19 | INTEGER | read-only | The propagation TC(topology change) |
| INT sleRapsRingNonRevertive | 1.3.6.1.4.1.6296.101.4.15.1.1.20 | INTEGER | read-only | The Non-Revertive |
| INT sleRapsRingForcedSwitch | 1.3.6.1.4.1.6296.101.4.15.1.1.21 | INTEGER | read-only | Indicates the Forced Switch |
| INT sleRapsRingManualSwitch | 1.3.6.1.4.1.6296.101.4.15.1.1.22 | INTEGER | read-only | Indicates the Manual Switch |
| INT sleRapsRingHoldOffTime | 1.3.6.1.4.1.6296.101.4.15.1.1.23 | INTEGER | read-only | Indicates the hold-off time |
| INT sleRapsRingGuardTime | 1.3.6.1.4.1.6296.101.4.15.1.1.24 | INTEGER | read-only | Indicates the guard time |
| INT sleRapsRingWaitToRestore | 1.3.6.1.4.1.6296.101.4.15.1.1.25 | INTEGER | read-only | Indicates the wait-to-restore time |
| INT sleRapsRingWaitToBlock | 1.3.6.1.4.1.6296.101.4.15.1.1.26 | INTEGER | read-only | Indicates the wait-to-block time |
| I32 sleRapsRingInstId | 1.3.6.1.4.1.6296.101.4.15.1.1.27 | Integer32 | read-only | Indicates the ring instance ID. |
| INT sleRapsRingChannel | 1.3.6.1.4.1.6296.101.4.15.1.1.28 | INTEGER | read-only | Indicates the R-APS channel type. |
| INT sleRapsRingPassThrough | 1.3.6.1.4.1.6296.101.4.15.1.1.29 | INTEGER | read-only | Indicates the pass-through funtion. |
| INT sleRapsRingVerifiedTime | 1.3.6.1.4.1.6296.101.4.15.1.1.30 | INTEGER | read-only | Indicates the verified time |
| sleRapsRingControl | 1.3.6.1.4.1.6296.101.4.15.2 | |||
| INT sleRapsRingControlRequest | 1.3.6.1.4.1.6296.101.4.15.2.1 | INTEGER | read-write | Description. |
| SLE sleRapsRingControlStatus | 1.3.6.1.4.1.6296.101.4.15.2.2 | SleControlStatusType | read-only | Description. |
| G32 sleRapsRingControlTimer | 1.3.6.1.4.1.6296.101.4.15.2.3 | Gauge32 | read-write | Description. |
| TIK sleRapsRingControlTimeStamp | 1.3.6.1.4.1.6296.101.4.15.2.4 | TimeTicks | read-only | Description. |
| SLE sleRapsRingControlReqResult | 1.3.6.1.4.1.6296.101.4.15.2.5 | SleControlRequestResultType | read-only | Description. |
| I32 sleRapsRingControlId | 1.3.6.1.4.1.6296.101.4.15.2.6 | Integer32 | read-write | Indicates the Rings ID |
| INT sleRapsRingControlType | 1.3.6.1.4.1.6296.101.4.15.2.7 | INTEGER | read-write | Indicates the Rings type |
| INT sleRapsRingControlLevel | 1.3.6.1.4.1.6296.101.4.15.2.8 | INTEGER | read-write | Indicates the Rings level |
| INT sleRapsRingControlCtrlVlan | 1.3.6.1.4.1.6296.101.4.15.2.9 | INTEGER | read-write | Indicates the Ring Nodes control-vlan |
| OCT sleRapsRingControlTrafficVlans | 1.3.6.1.4.1.6296.101.4.15.2.10 | OCTET STRING | read-write | Indicates the Ring Nodes traffic-vlans |
| INT sleRapsRingControlChannel | 1.3.6.1.4.1.6296.101.4.15.2.11 | INTEGER | read-write | Indicates the Ring Node's channel |
| INT sleRapsRingControlEnable | 1.3.6.1.4.1.6296.101.4.15.2.12 | INTEGER | read-write | IEnables/Disables Ring Node |
| I32 sleRapsRingControlEastPort | 1.3.6.1.4.1.6296.101.4.15.2.13 | Integer32 | read-write | Indicates the Ring Nodes east port |
| I32 sleRapsRingControlWestPort | 1.3.6.1.4.1.6296.101.4.15.2.14 | Integer32 | read-write | Indicates the Ring Nodes west port |
| INT sleRapsRingControlParamPort | 1.3.6.1.4.1.6296.101.4.15.2.15 | INTEGER | read-write | Indicates the rpl port, interconnection port, forced or manual switch port. |
| INT sleRapsRingControlBridgeRole | 1.3.6.1.4.1.6296.101.4.15.2.16 | INTEGER | read-write | Indicates the Rings RPL port type |
| INT sleRapsRingControlIcNode | 1.3.6.1.4.1.6296.101.4.15.2.17 | INTEGER | read-write | Indicates the primary/secondary node for the minimization of the segmentation |
| INT sleRapsRingControlMultipleFailure | 1.3.6.1.4.1.6296.101.4.15.2.18 | INTEGER | read-write | The multiple failure of Ring Node |
| INT sleRapsRingControlPropagateTc | 1.3.6.1.4.1.6296.101.4.15.2.19 | INTEGER | read-write | The propagation TC |
| INT sleRapsRingControlNonRevertive | 1.3.6.1.4.1.6296.101.4.15.2.20 | INTEGER | read-write | The Non-Revertive |
| INT sleRapsRingControlHoldOffTime | 1.3.6.1.4.1.6296.101.4.15.2.21 | INTEGER | read-write | Indicates the hold-off time. The hold-off time's step must be 100 |
| INT sleRapsRingControlGuardTime | 1.3.6.1.4.1.6296.101.4.15.2.22 | INTEGER | read-write | Indicates the guard time. The guard time's step must be 10. |
| INT sleRapsRingControlWaitToRestore | 1.3.6.1.4.1.6296.101.4.15.2.23 | INTEGER | read-write | Indicates the wait-to-restore time |
| INT sleRapsRingControlWaitToBlock | 1.3.6.1.4.1.6296.101.4.15.2.24 | INTEGER | read-write | Indicates the wait-to-block time |
| I32 sleRapsRingControlInstId | 1.3.6.1.4.1.6296.101.4.15.2.25 | Integer32 | read-write | Indicates the ring instance ID. |
| INT sleRapsRingControlPassThrough | 1.3.6.1.4.1.6296.101.4.15.2.26 | INTEGER | read-write | Indicates the pass-through function. |
| INT sleRapsRingControlVerifiedTime | 1.3.6.1.4.1.6296.101.4.15.2.27 | INTEGER | read-write | Indicates the verified time. |
| sleRapsRingNotification | 1.3.6.1.4.1.6296.101.4.15.3 | |||
| NTF sleRapsRingCreated | 1.3.6.1.4.1.6296.101.4.15.3.1 | createRapsRing | ||
| NTF sleRapsRingDeleted | 1.3.6.1.4.1.6296.101.4.15.3.2 | deleteRapsRing | ||
| NTF sleRapsRingChannelChanged | 1.3.6.1.4.1.6296.101.4.15.3.3 | setRapsRingChannel | ||
| NTF sleRapsRingEnableChanged | 1.3.6.1.4.1.6296.101.4.15.3.4 | setRapsRingEnable | ||
| NTF sleRapsRingPortsCreated | 1.3.6.1.4.1.6296.101.4.15.3.5 | setRapsRingPorts | ||
| NTF sleRapsRingPortsDestroyed | 1.3.6.1.4.1.6296.101.4.15.3.6 | destroyRapsRingPorts | ||
| NTF sleRapsRingRplPortChanged | 1.3.6.1.4.1.6296.101.4.15.3.7 | setRapsRingRplPort | ||
| NTF sleRapsRingIcPortCreated | 1.3.6.1.4.1.6296.101.4.15.3.8 | setRapsRingIcPort | ||
| NTF sleRapsRingIcPortDestroyed | 1.3.6.1.4.1.6296.101.4.15.3.9 | destroyRapsRingIcPort | ||
| NTF sleRapsRingMultipleFailureChanged | 1.3.6.1.4.1.6296.101.4.15.3.10 | setRapsRingMultipleFailure | ||
| NTF sleRapsRingPropagateTcChanged | 1.3.6.1.4.1.6296.101.4.15.3.11 | setRapsRingPropagateTc | ||
| NTF sleRapsRingNonRevertiveChanged | 1.3.6.1.4.1.6296.101.4.15.3.12 | setRapsRingNonRevertive | ||
| NTF sleRapsRingForcedSwitchChanged | 1.3.6.1.4.1.6296.101.4.15.3.13 | setRapsRingForcedSwitch | ||
| NTF sleRapsRingManualSwitchChanged | 1.3.6.1.4.1.6296.101.4.15.3.14 | setRapsRingManualSwitch | ||
| NTF sleRapsRingSwitchCleared | 1.3.6.1.4.1.6296.101.4.15.3.15 | setRapsRingClearSwitch | ||
| NTF sleRapsRingHoldOffTimeChanged | 1.3.6.1.4.1.6296.101.4.15.3.16 | setRapsRingHoldOffTime | ||
| NTF sleRapsRingGuardTimeChanged | 1.3.6.1.4.1.6296.101.4.15.3.17 | setRapsRingGuardTime | ||
| NTF sleRapsRingWtrTimeChanged | 1.3.6.1.4.1.6296.101.4.15.3.18 | setRapsRingWtrTime | ||
| NTF sleRapsRingWtbTimeChanged | 1.3.6.1.4.1.6296.101.4.15.3.19 | setRapsRingWtbTime | ||
| NTF sleRapsRingPassThroughChanged | 1.3.6.1.4.1.6296.101.4.15.3.20 | setRapsRingPassThrough | ||
| NTF sleRapsRingVrfTimeChanged | 1.3.6.1.4.1.6296.101.4.15.3.21 | setRapsRingVrfTime | ||
| sleFaultMonitor | 1.3.6.1.4.1.6296.101.4.16 | |||
| sleFaultMonitorGlobal | 1.3.6.1.4.1.6296.101.4.16.1 | |||
| sleFaultMonitorGlobalBase | 1.3.6.1.4.1.6296.101.4.16.1.1 | |||
| INT sleFaultMonitorGlobalInspectInterval | 1.3.6.1.4.1.6296.101.4.16.1.1.1 | INTEGER | read-only | daemon Inspection value. unit : sec, default : 5 |
| INT sleFaultMonitorGlobalStartupThreshold | 1.3.6.1.4.1.6296.101.4.16.1.1.2 | INTEGER | read-only | daemon startup threshold value. unit : sec, default : 100 |
| INT sleFaultMonitorGlobalNoKeepalive | 1.3.6.1.4.1.6296.101.4.16.1.1.3 | INTEGER | read-only | Indicate action when don't receive keepalive msg. |
| sleFaultMonitorGlobalControl | 1.3.6.1.4.1.6296.101.4.16.1.2 | |||
| INT sleFaultMonitorGlobalControlRequest | 1.3.6.1.4.1.6296.101.4.16.1.2.1 | INTEGER | read-write | |
| SLE sleFaultMonitorGlobalControlStatus | 1.3.6.1.4.1.6296.101.4.16.1.2.2 | SleControlStatusType | read-only | The status of a control request. |
| U32 sleFaultMonitorGlobalControlTimer | 1.3.6.1.4.1.6296.101.4.16.1.2.3 | Unsigned32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleFaultMonitorGlobalControlTimeStamp | 1.3.6.1.4.1.6296.101.4.16.1.2.4 | TimeTicks | read-only | The time stamp of the last command (end of command). |
| SLE sleFaultMonitorGlobalControlReqResult | 1.3.6.1.4.1.6296.101.4.16.1.2.5 | SleControlRequestResultType | read-only | The result of the last user command. |
| INT sleFaultMonitorGlobalControlInspectInterval | 1.3.6.1.4.1.6296.101.4.16.1.2.6 | INTEGER | read-write | daemon Inspection value. unit : sec, default : 5 |
| INT sleFaultMonitorGlobalControlStartupThreshold | 1.3.6.1.4.1.6296.101.4.16.1.2.7 | INTEGER | read-write | daemon startup threshold value. unit : sec, default : 100 |
| INT sleFaultMonitorGlobalControlNoKeepalive | 1.3.6.1.4.1.6296.101.4.16.1.2.8 | INTEGER | read-write | Indicate action when don't receive keepalive msg. |
| sleFaultMonitorGlobalNotification | 1.3.6.1.4.1.6296.101.4.16.1.3 | |||
| NTF setFaultMonitorGlobalInspectIntervalChanged | 1.3.6.1.4.1.6296.101.4.16.1.3.1 | Description. | ||
| NTF setFaultMonitorGlobalStartupThresholdChanged | 1.3.6.1.4.1.6296.101.4.16.1.3.2 | Description. | ||
| NTF setFaultMonitorGlobalNoKeepaliveActionChanged | 1.3.6.1.4.1.6296.101.4.16.1.3.3 | Description. | ||
| sleFaultMonitorDaemonConfig | 1.3.6.1.4.1.6296.101.4.16.2 | |||
| sleFaultMonitorDaemonTable | 1.3.6.1.4.1.6296.101.4.16.2.1 | not-accessible | Description. | |
| sleFaultMonitorDaemonEntry | 1.3.6.1.4.1.6296.101.4.16.2.1.1 | not-accessible | Description. | |
| OCT sleFaultMonitorDaemonName | 1.3.6.1.4.1.6296.101.4.16.2.1.1.1 | OCTET STRING | read-only | Daemon name |
| I32 sleFaultMonitorDaemonPid | 1.3.6.1.4.1.6296.101.4.16.2.1.1.2 | Integer32 | read-only | Daemon PID |
| INT sleFaultMonitorDaemonAdminStatus | 1.3.6.1.4.1.6296.101.4.16.2.1.1.3 | INTEGER | read-only | Daemon Inspection admin status. |
| INT sleFaultMonitorDaemonCrashAction | 1.3.6.1.4.1.6296.101.4.16.2.1.1.4 | INTEGER | read-only | Indicate action type when daemon is crashed |
| INT sleFaultMonitorDaemonTimeoutAction | 1.3.6.1.4.1.6296.101.4.16.2.1.1.5 | INTEGER | read-only | Indicate action type when daemon is timeout |
| I32 sleFaultMonitorDaemonThreshold | 1.3.6.1.4.1.6296.101.4.16.2.1.1.6 | Integer32 | read-only | Indicate fault admin threshold. |
| I32 sleFaultMonitorDaemonThresholded | 1.3.6.1.4.1.6296.101.4.16.2.1.1.7 | Integer32 | read-only | Indicate fault accumulated threshold. |
| I32 sleFaultMonitorDaemonStartupThresholded | 1.3.6.1.4.1.6296.101.4.16.2.1.1.8 | Integer32 | read-only | Description. |
| INT sleFaultMonitorDaemonWatchdogAdminStatus | 1.3.6.1.4.1.6296.101.4.16.2.1.1.9 | INTEGER | read-only | Indicate whether connect watchdog or not |
| I32 sleFaultMonitorDaemonWatchdogThreshold | 1.3.6.1.4.1.6296.101.4.16.2.1.1.10 | Integer32 | read-only | Indicate watchdog threshold of daemon. |
| I32 sleFaultMonitorDaemonWatchdogCount | 1.3.6.1.4.1.6296.101.4.16.2.1.1.11 | Integer32 | read-only | Indicate watchdog accumulated count. |
| sleFaultMonitorDaemonControl | 1.3.6.1.4.1.6296.101.4.16.2.2 | |||
| INT sleFaultMonitorDaemonControlRequest | 1.3.6.1.4.1.6296.101.4.16.2.2.1 | INTEGER | read-write | |
| SLE sleFaultMonitorDaemonControlStatus | 1.3.6.1.4.1.6296.101.4.16.2.2.2 | SleControlStatusType | read-only | The status of a control request. |
| U32 sleFaultMonitorDaemonControlTimer | 1.3.6.1.4.1.6296.101.4.16.2.2.3 | Unsigned32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleFaultMonitorDaemonControlTimeStamp | 1.3.6.1.4.1.6296.101.4.16.2.2.4 | TimeTicks | read-only | The time stamp of the last command (end of command). |
| SLE sleFaultMonitorDaemonControlReqResult | 1.3.6.1.4.1.6296.101.4.16.2.2.5 | SleControlRequestResultType | read-only | The result of the last user command. |
| OCT sleFaultMonitorDaemonControlName | 1.3.6.1.4.1.6296.101.4.16.2.2.6 | OCTET STRING | read-write | Description. |
| INT sleFaultMonitorDaemonControlAdminStatus | 1.3.6.1.4.1.6296.101.4.16.2.2.7 | INTEGER | read-write | daemon Inspection value. unit : sec, default : 5 |
| INT sleFaultMonitorDaemonControlCrashAction | 1.3.6.1.4.1.6296.101.4.16.2.2.8 | INTEGER | read-write | daemon startup threshold value. unit : sec, default : 100 |
| INT sleFaultMonitorDaemonControlTimeoutAction | 1.3.6.1.4.1.6296.101.4.16.2.2.9 | INTEGER | read-write | Indicate action when don't receive keepalive msg. |
| I32 sleFaultMonitorDaemonControlThreshold | 1.3.6.1.4.1.6296.101.4.16.2.2.10 | Integer32 | read-write | Description. |
| I32 sleFaultMonitorDaemonControlThreshed | 1.3.6.1.4.1.6296.101.4.16.2.2.11 | Integer32 | read-write | Description. |
| I32 sleFaultMonitorDaemonControlStartupThresh | 1.3.6.1.4.1.6296.101.4.16.2.2.12 | Integer32 | read-write | Description. |
| INT sleFaultMonitorDaemonControlWatchdogAdminStatus | 1.3.6.1.4.1.6296.101.4.16.2.2.13 | INTEGER | read-write | Description. |
| I32 sleFaultMonitorDaemonControlWatchdogThreshold | 1.3.6.1.4.1.6296.101.4.16.2.2.14 | Integer32 | read-write | Description. |
| sleFaultMonitorDaemonNotification | 1.3.6.1.4.1.6296.101.4.16.2.4 | |||
| NTF setFaultMonitorDaemonAdminStatusChanged | 1.3.6.1.4.1.6296.101.4.16.2.4.1 | Description. | ||
| NTF setFaultMonitorDaemonFaultActionChanged | 1.3.6.1.4.1.6296.101.4.16.2.4.2 | Description. | ||
| NTF setFaultMonitorDaemonThresholdChanged | 1.3.6.1.4.1.6296.101.4.16.2.4.3 | Description. | ||
| NTF setFaultMonitorDaemonWatchdogchanged | 1.3.6.1.4.1.6296.101.4.16.2.4.4 | Description. | ||
| sleFaultMonitor2pointsLinear | 1.3.6.1.4.1.6296.101.4.16.3 | |||
| sleFaultMonitor2pointsLinearInfo | 1.3.6.1.4.1.6296.101.4.16.3.1 | |||
| INT sleFaultMonitor2pointsLinearAdminStatus | 1.3.6.1.4.1.6296.101.4.16.3.1.1 | INTEGER | read-only | Indicate whether 2-points-linear monitoring is enabled or not |
| I32 sleFaultMonitor2pointsLinearInterval | 1.3.6.1.4.1.6296.101.4.16.3.1.2 | Integer32 | read-only | Indicate 2-points-linear monitoring interval default : 5, unit : sec |
| I32 sleFaultMonitor2pointsLinearThreshold | 1.3.6.1.4.1.6296.101.4.16.3.1.3 | Integer32 | read-only | Indicate 2-points-linear monitoring threshold default : 8 times |
| sleFaultMonitor2pointsLinearControl | 1.3.6.1.4.1.6296.101.4.16.3.2 | |||
| INT sleFaultMonitor2pointsLinearControlRequest | 1.3.6.1.4.1.6296.101.4.16.3.2.1 | INTEGER | read-write | |
| SLE sleFaultMonitor2pointsLinearControlStatus | 1.3.6.1.4.1.6296.101.4.16.3.2.2 | SleControlStatusType | read-only | The status of a control request. |
| U32 sleFaultMonitor2pointsLinearControlTimer | 1.3.6.1.4.1.6296.101.4.16.3.2.3 | Unsigned32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleFaultMonitor2pointsLinearControlTimeStamp | 1.3.6.1.4.1.6296.101.4.16.3.2.4 | TimeTicks | read-only | The time stamp of the last command (end of command). |
| SLE sleFaultMonitor2pointsLinearControlReqResult | 1.3.6.1.4.1.6296.101.4.16.3.2.5 | SleControlRequestResultType | read-only | The result of the last user command. |
| INT sleFaultMonitor2pointsLinearControlAdminStatus | 1.3.6.1.4.1.6296.101.4.16.3.2.6 | INTEGER | read-write | |
| I32 sleFaultMonitor2PonitsLinearControlInterval | 1.3.6.1.4.1.6296.101.4.16.3.2.7 | Integer32 | read-write | Indicate 2-points-linear monitoring interval default : 5, unit : sec |
| I32 sleFaultMonitor2PointsLinearControlThreshold | 1.3.6.1.4.1.6296.101.4.16.3.2.8 | Integer32 | read-write | Indicate 2-points-linear monitoring threshold default : 8 times |
| sleFaultMonitor2pointsLinearNotification | 1.3.6.1.4.1.6296.101.4.16.3.3 | |||
| NTF sleFaultMonitor2PointsLinearAdminStatusChanged | 1.3.6.1.4.1.6296.101.4.16.3.3.1 | Description. | ||
| NTF sleFaultMonitor2PointsLinearIntervalChanged | 1.3.6.1.4.1.6296.101.4.16.3.3.2 | Description. | ||
| NTF sleFaultMonitor2PointsLinearThresholdChanged | 1.3.6.1.4.1.6296.101.4.16.3.3.3 | Description. | ||
| sleFaultMonitorRHM | 1.3.6.1.4.1.6296.101.4.16.4 | |||
| sleFaultMonitorRHMInfo | 1.3.6.1.4.1.6296.101.4.16.4.1 | |||
| INT sleFaultMonitorRHMAdminStatus | 1.3.6.1.4.1.6296.101.4.16.4.1.1 | INTEGER | read-only | The RHM admin status |
| INT sleFaultMonitorRHMActionType | 1.3.6.1.4.1.6296.101.4.16.4.1.2 | INTEGER | read-only | The RHM action type |
| I32 sleFaultMonitorRHMActionThreshold | 1.3.6.1.4.1.6296.101.4.16.4.1.3 | Integer32 | read-only | The RHM action threshold |
| I32 sleFaultMonitorRHMRebootThreshold | 1.3.6.1.4.1.6296.101.4.16.4.1.4 | Integer32 | read-only | The RHM reboot threshold |
| I32 sleFaultMonitorRHMRecoveryTime | 1.3.6.1.4.1.6296.101.4.16.4.1.5 | Integer32 | read-only | The RHM recovery time |
| I32 sleFaultMonitorRHMFaultCounter | 1.3.6.1.4.1.6296.101.4.16.4.1.6 | Integer32 | read-only | The RHM fault counter |
| I32 sleFaultMonitorRHMRebootCounter | 1.3.6.1.4.1.6296.101.4.16.4.1.7 | Integer32 | read-only | The RHM reboot counter |
| I32 sleFaultMonitorRHMInterval | 1.3.6.1.4.1.6296.101.4.16.4.1.8 | Integer32 | read-only | Description. |
| I32 sleFaultMonitorRHMLiveThreshold | 1.3.6.1.4.1.6296.101.4.16.4.1.9 | Integer32 | read-only | Description. |
| sleFaultMonitorRHMHostTable | 1.3.6.1.4.1.6296.101.4.16.4.2 | not-accessible | Description. | |
| sleFaultMonitorRHMHostEntry | 1.3.6.1.4.1.6296.101.4.16.4.2.1 | not-accessible | Description. | |
| IP sleFaultMonitorRHMHostAddr | 1.3.6.1.4.1.6296.101.4.16.4.2.1.1 | IpAddress | read-only | The target host or gateway address of RHM |
| sleFaultMonitorRHMControl | 1.3.6.1.4.1.6296.101.4.16.4.3 | |||
| INT sleFaultMonitorRHMControlRequest | 1.3.6.1.4.1.6296.101.4.16.4.3.1 | INTEGER | read-write | |
| SLE sleFaultMonitorRHMControlStatus | 1.3.6.1.4.1.6296.101.4.16.4.3.2 | SleControlStatusType | read-only | The status of a control request. |
| U32 sleFaultMonitorRHMControlTimer | 1.3.6.1.4.1.6296.101.4.16.4.3.3 | Unsigned32 | read-write | The maximum wait time for the manager for command ending. For long running commands. The manager reads this value from the DSLAM. |
| TIK sleFaultMonitorRHMControlTimeStamp | 1.3.6.1.4.1.6296.101.4.16.4.3.4 | TimeTicks | read-only | The time stamp of the last command (end of command). |
| SLE sleFaultMonitorRHMControlReqResult | 1.3.6.1.4.1.6296.101.4.16.4.3.5 | SleControlRequestResultType | read-only | The result of the last user command. |
| INT sleFaultMonitorRHMControlAdminStatus | 1.3.6.1.4.1.6296.101.4.16.4.3.6 | INTEGER | read-write | |
| INT sleFaultMonitorRHMControlActionType | 1.3.6.1.4.1.6296.101.4.16.4.3.7 | INTEGER | read-write | Indicate 2-points-linear monitoring interval default : 5, unit : sec |
| I32 sleFaultMonitorRHMControlActionThreshold | 1.3.6.1.4.1.6296.101.4.16.4.3.8 | Integer32 | read-write | The RHM reboot threshold |
| I32 sleFaultMonitorRHMControlRebootThreshold | 1.3.6.1.4.1.6296.101.4.16.4.3.9 | Integer32 | read-write | The RHM reboot threshold |
| I32 sleFaultMonitorRHMControlRecoveryTime | 1.3.6.1.4.1.6296.101.4.16.4.3.10 | Integer32 | read-write | The RHM recovery time |
| I32 sleFaultMonitorRHMControlInterval | 1.3.6.1.4.1.6296.101.4.16.4.3.11 | Integer32 | read-write | Description. |
| I32 sleFaultMonitorRHMControlLiveThreshold | 1.3.6.1.4.1.6296.101.4.16.4.3.12 | Integer32 | read-write | Description. |
| IP sleFaultMonitorRHMControlHostAddr | 1.3.6.1.4.1.6296.101.4.16.4.3.13 | IpAddress | read-write | Description. |
| sleFaultMonitorRHMNotification | 1.3.6.1.4.1.6296.101.4.16.4.4 | |||
| NTF setRHMStatusChanged | 1.3.6.1.4.1.6296.101.4.16.4.4.1 | Description. | ||
| NTF setRHMActionThresholdChanged | 1.3.6.1.4.1.6296.101.4.16.4.4.2 | Description. | ||
| NTF setRHMRebootThresholdChanged | 1.3.6.1.4.1.6296.101.4.16.4.4.3 | Description. | ||
| NTF setRHMHostAdded | 1.3.6.1.4.1.6296.101.4.16.4.4.4 | Description. | ||
| NTF setRHMHostCleared | 1.3.6.1.4.1.6296.101.4.16.4.4.5 | Description. | ||
| sle2EthernetCfm | 1.3.6.1.4.1.6296.101.4.17 | |||
| sle2EthernetCfmBase | 1.3.6.1.4.1.6296.101.4.17.1 | |||
| sle2EthCfmBaseGroup | 1.3.6.1.4.1.6296.101.4.17.1.1 | |||
| INT sle2EthCfmEnable | 1.3.6.1.4.1.6296.101.4.17.1.1.1 | INTEGER | read-only | Description. |
| INT sle2EthCfmLmmFrameCountSimStatus | 1.3.6.1.4.1.6296.101.4.17.1.1.2 | INTEGER | read-only | Description. |
| sle2EthCfmBaseControl | 1.3.6.1.4.1.6296.101.4.17.1.2 | |||
| INT sle2EthCfmControlRequest | 1.3.6.1.4.1.6296.101.4.17.1.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmControlStatus | 1.3.6.1.4.1.6296.101.4.17.1.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmControlTimer | 1.3.6.1.4.1.6296.101.4.17.1.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.1.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmControlReqResult | 1.3.6.1.4.1.6296.101.4.17.1.2.5 | SleControlRequestResultType | read-write | Description. |
| INT sle2EthCfmControlEnable | 1.3.6.1.4.1.6296.101.4.17.1.2.6 | INTEGER | read-write | Description. |
| INT sle2EthCfmControlLmmFrameCountSimStatus | 1.3.6.1.4.1.6296.101.4.17.1.2.7 | INTEGER | read-write | Description. |
| sle2EthCfmBaseNotification | 1.3.6.1.4.1.6296.101.4.17.1.3 | |||
| NTF sle2EthCfmEnableChanged | 1.3.6.1.4.1.6296.101.4.17.1.3.1 | Description. | ||
| NTF sle2EthCfmLmmFrameCountSimulatorChanged | 1.3.6.1.4.1.6296.101.4.17.1.3.2 | Description. | ||
| sle2EthernetCfmBridge | 1.3.6.1.4.1.6296.101.4.17.2 | |||
| sle2EthCfmBridgeTable | 1.3.6.1.4.1.6296.101.4.17.2.1 | not-accessible | Description. | |
| sle2EthCfmBridgeEntry | 1.3.6.1.4.1.6296.101.4.17.2.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmBridgeId | 1.3.6.1.4.1.6296.101.4.17.2.1.1.1 | Integer32 | read-only | Description. |
| I32 sle2EthCfmBridgeDefaultMdLevel | 1.3.6.1.4.1.6296.101.4.17.2.1.1.2 | Integer32 | read-only | Description. |
| I32 sle2EthCfmBridgeDefaultMepId | 1.3.6.1.4.1.6296.101.4.17.2.1.1.3 | Integer32 | read-only | Description. |
| INT sle2EthCfmBridgeAutomatic | 1.3.6.1.4.1.6296.101.4.17.2.1.1.4 | INTEGER | read-only | Description. |
| I32 sle2EthCfmBridgeConfigDefaultMdLevel | 1.3.6.1.4.1.6296.101.4.17.2.1.1.5 | Integer32 | read-only | Description. |
| INT sle2EthCfmBridgeConfigDefaultMdMipCreation | 1.3.6.1.4.1.6296.101.4.17.2.1.1.6 | INTEGER | read-only | Description. |
| INT sle2EthCfmBridgeLtrCacheEnable | 1.3.6.1.4.1.6296.101.4.17.2.1.1.7 | INTEGER | read-only | Description. |
| I32 sle2EthCfmBridgeLtrCacheSize | 1.3.6.1.4.1.6296.101.4.17.2.1.1.8 | Integer32 | read-only | Description. |
| sle2EthCfmBridgeControl | 1.3.6.1.4.1.6296.101.4.17.2.2 | |||
| INT sle2EthCfmBridgeControlRequest | 1.3.6.1.4.1.6296.101.4.17.2.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmBridgeControlStatus | 1.3.6.1.4.1.6296.101.4.17.2.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmBridgeControlTimer | 1.3.6.1.4.1.6296.101.4.17.2.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmBridgeControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.2.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmBridgeControlReqResult | 1.3.6.1.4.1.6296.101.4.17.2.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmBridgeControlId | 1.3.6.1.4.1.6296.101.4.17.2.2.6 | Integer32 | read-write | Description. |
| I32 sle2EthCfmBridgeControlDefaultMdLevel | 1.3.6.1.4.1.6296.101.4.17.2.2.7 | Integer32 | read-write | Description. |
| I32 sle2EthCfmBridgeControlDefaultMepId | 1.3.6.1.4.1.6296.101.4.17.2.2.8 | Integer32 | read-write | Description. |
| INT sle2EthCfmBridgeControlAutomatic | 1.3.6.1.4.1.6296.101.4.17.2.2.9 | INTEGER | read-write | Description. |
| I32 sle2EthCfmBridgeControlConfigDefaultMdLevel | 1.3.6.1.4.1.6296.101.4.17.2.2.10 | Integer32 | read-write | Description. |
| INT sle2EthCfmBridgeControlConfigDefaultMdMipCreation | 1.3.6.1.4.1.6296.101.4.17.2.2.11 | INTEGER | read-write | Description. |
| INT sle2EthCfmBridgeConntrolLtrCacheEnable | 1.3.6.1.4.1.6296.101.4.17.2.2.12 | INTEGER | read-write | Description. |
| I32 sle2EthCfmBridgeControlLtrCacheSize | 1.3.6.1.4.1.6296.101.4.17.2.2.13 | Integer32 | read-write | Description. |
| sle2EthCfmBridgeNotification | 1.3.6.1.4.1.6296.101.4.17.2.3 | |||
| NTF setCfmBridgeProfile | 1.3.6.1.4.1.6296.101.4.17.2.3.1 | Description. | ||
| NTF setCfmBridgeLtrCacheEnable | 1.3.6.1.4.1.6296.101.4.17.2.3.2 | Description. | ||
| NTF clearCfmBridgeLtrCache | 1.3.6.1.4.1.6296.101.4.17.2.3.3 | Description. | ||
| NTF setCfmBridgeAutomatic | 1.3.6.1.4.1.6296.101.4.17.2.3.4 | Description. | ||
| NTF setCfmBridgeConfigDefaultMdLevel | 1.3.6.1.4.1.6296.101.4.17.2.3.5 | Description. | ||
| sle2EhternetCfmVlan | 1.3.6.1.4.1.6296.101.4.17.3 | |||
| sle2EthernetCfmVlanConfig | 1.3.6.1.4.1.6296.101.4.17.3.1 | |||
| sle2EthCfmVlanConfigTable | 1.3.6.1.4.1.6296.101.4.17.3.1.1 | not-accessible | Description. | |
| sle2EthCfmVlanConfigEntry | 1.3.6.1.4.1.6296.101.4.17.3.1.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmVlanConfigPrimaryVid | 1.3.6.1.4.1.6296.101.4.17.3.1.1.1.1 | Integer32 | read-only | Description. |
| I32 sle2EthCfmVlanConfigSecondaryVid | 1.3.6.1.4.1.6296.101.4.17.3.1.1.1.2 | Integer32 | read-only | Description. |
| I32 sle2EthCfmVlanConfigSecondaryBridgeId | 1.3.6.1.4.1.6296.101.4.17.3.1.1.1.3 | Integer32 | read-only | Description. |
| sle2EthCfmVlanConfigControl | 1.3.6.1.4.1.6296.101.4.17.3.1.2 | |||
| INT sle2EthCfmVlanConfigControlRequest | 1.3.6.1.4.1.6296.101.4.17.3.1.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmVlanConfigControlStatus | 1.3.6.1.4.1.6296.101.4.17.3.1.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmVlanConfigControlTimer | 1.3.6.1.4.1.6296.101.4.17.3.1.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmVlanConfigControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.3.1.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmVlanConfigControlReqResult | 1.3.6.1.4.1.6296.101.4.17.3.1.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmVlanConfigControlPrimaryBridgeId | 1.3.6.1.4.1.6296.101.4.17.3.1.2.6 | Integer32 | read-write | Description. |
| I32 sle2EthCfmVlanConfigControlPrimaryVid | 1.3.6.1.4.1.6296.101.4.17.3.1.2.7 | Integer32 | read-write | Description. |
| I32 sle2EthCfmVlanConfigControlSecondaryBridgeId | 1.3.6.1.4.1.6296.101.4.17.3.1.2.8 | Integer32 | read-write | Description. |
| I32 sle2EthCfmVlanConfigControlSecondaryVid | 1.3.6.1.4.1.6296.101.4.17.3.1.2.9 | Integer32 | read-write | Description. |
| sle2EthCfmVlanConfigNotification | 1.3.6.1.4.1.6296.101.4.17.3.1.3 | |||
| NTF addCfmVlanConfVid | 1.3.6.1.4.1.6296.101.4.17.3.1.3.1 | Description. | ||
| NTF delCfmVlanConfVid | 1.3.6.1.4.1.6296.101.4.17.3.1.3.2 | Description. | ||
| sle2EthernetCfmVlanInfo | 1.3.6.1.4.1.6296.101.4.17.3.2 | |||
| sle2EthCfmVlanInfoTable | 1.3.6.1.4.1.6296.101.4.17.3.2.1 | not-accessible | Description. | |
| sle2EthCfmVlanInfoEntry | 1.3.6.1.4.1.6296.101.4.17.3.2.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmVlanInfoVid | 1.3.6.1.4.1.6296.101.4.17.3.2.1.1.1 | Integer32 | read-only | Description. |
| I32 sle2EthCfmVlanInfoPriority | 1.3.6.1.4.1.6296.101.4.17.3.2.1.1.2 | Integer32 | read-only | Description. |
| sle2EthCfmVlanInfoControl | 1.3.6.1.4.1.6296.101.4.17.3.2.2 | |||
| INT sle2EthCfmVlanInfoControlRequest | 1.3.6.1.4.1.6296.101.4.17.3.2.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmVlanInfoControlStatus | 1.3.6.1.4.1.6296.101.4.17.3.2.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmVlanInfoControlTimer | 1.3.6.1.4.1.6296.101.4.17.3.2.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmVlanInfoControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.3.2.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmVlanInfoControlReqResult | 1.3.6.1.4.1.6296.101.4.17.3.2.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmVlanInfoControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.3.2.2.6 | Integer32 | read-write | Description. |
| I32 sle2EthCfmVlanInfoControlVid | 1.3.6.1.4.1.6296.101.4.17.3.2.2.7 | Integer32 | read-write | Description. |
| I32 sle2EthCfmVlanInfoControlPriority | 1.3.6.1.4.1.6296.101.4.17.3.2.2.8 | Integer32 | read-write | Description. |
| sle2EthCfmVlanInfoNotification | 1.3.6.1.4.1.6296.101.4.17.3.2.3 | |||
| NTF sle2EthCfmVlanPriorityChanged | 1.3.6.1.4.1.6296.101.4.17.3.2.3.1 | Description. | ||
| sle2EthernetCfmDefMdLevelEntry | 1.3.6.1.4.1.6296.101.4.17.4 | |||
| sle2EthCfmDefMdLevelEntryTable | 1.3.6.1.4.1.6296.101.4.17.4.1 | not-accessible | Description. | |
| sle2EthCfmDefMdLevelEntryEntry | 1.3.6.1.4.1.6296.101.4.17.4.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmDefMdLevelEntryVid | 1.3.6.1.4.1.6296.101.4.17.4.1.1.1 | Integer32 | read-only | Description. |
| I32 sle2EthCfmDefMdLevelEntryLevel | 1.3.6.1.4.1.6296.101.4.17.4.1.1.2 | Integer32 | read-only | Description. |
| INT sle2EthCfmDefMdLevelEntryMipCreation | 1.3.6.1.4.1.6296.101.4.17.4.1.1.3 | INTEGER | read-only | Description. |
| sle2EthCfmDefMdLevelEntryControl | 1.3.6.1.4.1.6296.101.4.17.4.2 | |||
| INT sle2EthCfmDefMdLevelEntryControlRequest | 1.3.6.1.4.1.6296.101.4.17.4.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmDefMdLevelEntryControlStatus | 1.3.6.1.4.1.6296.101.4.17.4.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmDefMdLevelEntryControlTimer | 1.3.6.1.4.1.6296.101.4.17.4.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmDefMdLevelEntryControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.4.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmDefMdLevelEntryControlReqResult | 1.3.6.1.4.1.6296.101.4.17.4.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmDefMdLevelEntryControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.4.2.6 | Integer32 | read-write | Description. |
| I32 sle2EthCfmDefMdLevelEntryControlVid | 1.3.6.1.4.1.6296.101.4.17.4.2.7 | Integer32 | read-write | Description. |
| I32 sle2EthCfmDefMdLevelEntryControlLevel | 1.3.6.1.4.1.6296.101.4.17.4.2.8 | Integer32 | read-write | Description. |
| INT sle2EthCfmDefMdLevelEntryControlMipCreation | 1.3.6.1.4.1.6296.101.4.17.4.2.9 | INTEGER | read-write | Description. |
| sle2EthCfmDefMdLevelEntryNotification | 1.3.6.1.4.1.6296.101.4.17.4.3 | |||
| NTF sle2EthCfmDefMdLevelEntryChanged | 1.3.6.1.4.1.6296.101.4.17.4.3.1 | Description. | ||
| NTF sle2EthCfmDefMdLevelEntryCleared | 1.3.6.1.4.1.6296.101.4.17.4.3.2 | Description. | ||
| sle2EthernetCfmMd | 1.3.6.1.4.1.6296.101.4.17.5 | |||
| sle2EthCfmMdTable | 1.3.6.1.4.1.6296.101.4.17.5.1 | not-accessible | Description. | |
| sle2EthCfmMdEntry | 1.3.6.1.4.1.6296.101.4.17.5.1.1 | not-accessible | Description. | |
| OCT sle2EthCfmMdName | 1.3.6.1.4.1.6296.101.4.17.5.1.1.1 | OCTET STRING | read-only | Description. |
| INT sle2EthCfmMdType | 1.3.6.1.4.1.6296.101.4.17.5.1.1.2 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMdLevel | 1.3.6.1.4.1.6296.101.4.17.5.1.1.3 | Integer32 | read-only | Description. |
| INT sle2EthCfmMdMipCreation | 1.3.6.1.4.1.6296.101.4.17.5.1.1.4 | INTEGER | read-only | Description. |
| sle2EthCfmMdControl | 1.3.6.1.4.1.6296.101.4.17.5.2 | |||
| INT sle2EthCfmMdControlRequest | 1.3.6.1.4.1.6296.101.4.17.5.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmMdControlStatus | 1.3.6.1.4.1.6296.101.4.17.5.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmMdControlTimer | 1.3.6.1.4.1.6296.101.4.17.5.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmMdControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.5.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmMdControlReqResult | 1.3.6.1.4.1.6296.101.4.17.5.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmMdControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.5.2.6 | Integer32 | read-write | Description. |
| INT sle2EthCfmMdControlType | 1.3.6.1.4.1.6296.101.4.17.5.2.7 | INTEGER | read-write | Description. |
| OCT sle2EthCfmMdControlName | 1.3.6.1.4.1.6296.101.4.17.5.2.8 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmMdControlLevel | 1.3.6.1.4.1.6296.101.4.17.5.2.9 | Integer32 | read-write | Description. |
| INT sle2EthCfmMdControlMipCreation | 1.3.6.1.4.1.6296.101.4.17.5.2.10 | INTEGER | read-write | Description. |
| sle2EthCfmMdNotification | 1.3.6.1.4.1.6296.101.4.17.5.3 | |||
| NTF sle2EthCfmMdCreated | 1.3.6.1.4.1.6296.101.4.17.5.3.1 | Description. | ||
| NTF sle2EthCfmMdDestoryed | 1.3.6.1.4.1.6296.101.4.17.5.3.2 | Description. | ||
| sle2EthernetCfmMa | 1.3.6.1.4.1.6296.101.4.17.6 | |||
| sle2EthCfmMaTable | 1.3.6.1.4.1.6296.101.4.17.6.1 | not-accessible | Description. | |
| sle2EthCfmMaEntry | 1.3.6.1.4.1.6296.101.4.17.6.1.1 | not-accessible | Description. | |
| OCT sle2EthCfmMaName | 1.3.6.1.4.1.6296.101.4.17.6.1.1.1 | OCTET STRING | read-only | Description. |
| I32 sle2EthCfmMaVid | 1.3.6.1.4.1.6296.101.4.17.6.1.1.2 | Integer32 | read-only | Description. |
| INT sle2EthCfmMaType | 1.3.6.1.4.1.6296.101.4.17.6.1.1.3 | INTEGER | read-only | Description. |
| INT sle2EthCfmMaMipCreation | 1.3.6.1.4.1.6296.101.4.17.6.1.1.4 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMaCcInterval | 1.3.6.1.4.1.6296.101.4.17.6.1.1.5 | Integer32 | read-only | Description. |
| INT sle2EthCfmMaElmi | 1.3.6.1.4.1.6296.101.4.17.6.1.1.6 | INTEGER | read-only | Description. |
| INT sle2EthCfmMaConnectivityStatus | 1.3.6.1.4.1.6296.101.4.17.6.1.1.7 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMaConfiguredRmepCount | 1.3.6.1.4.1.6296.101.4.17.6.1.1.8 | Integer32 | read-only | Description. |
| I32 sle2EthCfmMaConvergedRmepCount | 1.3.6.1.4.1.6296.101.4.17.6.1.1.9 | Integer32 | read-only | Description. |
| sle2EthCfmMaControl | 1.3.6.1.4.1.6296.101.4.17.6.2 | |||
| INT sle2EthCfmMaControlRequest | 1.3.6.1.4.1.6296.101.4.17.6.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmMaControlStatus | 1.3.6.1.4.1.6296.101.4.17.6.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmMaControlTimer | 1.3.6.1.4.1.6296.101.4.17.6.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmMaControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.6.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmMaControlReqResult | 1.3.6.1.4.1.6296.101.4.17.6.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmMaControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.6.2.6 | Integer32 | read-write | Description. |
| OCT sle2EthCfmMaControlMdName | 1.3.6.1.4.1.6296.101.4.17.6.2.7 | OCTET STRING | read-write | Description. |
| OCT sle2EthCfmMaControlName | 1.3.6.1.4.1.6296.101.4.17.6.2.8 | OCTET STRING | read-write | Description. |
| INT sle2EthCfmMaControlType | 1.3.6.1.4.1.6296.101.4.17.6.2.9 | INTEGER | read-write | Description. |
| I32 sle2EthCfmMaControlVid | 1.3.6.1.4.1.6296.101.4.17.6.2.10 | Integer32 | read-write | Description. |
| INT sle2EthCfmMaControlMipCreation | 1.3.6.1.4.1.6296.101.4.17.6.2.11 | INTEGER | read-write | Description. |
| I32 sle2EthCfmMaControlCcmInterval | 1.3.6.1.4.1.6296.101.4.17.6.2.12 | Integer32 | read-write | Description. |
| INT sle2EthCfmMaControlElmi | 1.3.6.1.4.1.6296.101.4.17.6.2.13 | INTEGER | read-write | Description. |
| sle2EthCfmMaNotification | 1.3.6.1.4.1.6296.101.4.17.6.3 | |||
| NTF sle2EthCfmMaCreated | 1.3.6.1.4.1.6296.101.4.17.6.3.1 | Description. | ||
| NTF sle2EthCfmMaDestoryed | 1.3.6.1.4.1.6296.101.4.17.6.3.2 | Description. | ||
| NTF sle2EthCfmCcIntervalChanged | 1.3.6.1.4.1.6296.101.4.17.6.3.3 | Description. | ||
| NTF sle2EthCfmElmiChanged | 1.3.6.1.4.1.6296.101.4.17.6.3.4 | Description. | ||
| sle2EthernetCfmMep | 1.3.6.1.4.1.6296.101.4.17.7 | |||
| sle2EthernetCfmMepInfo | 1.3.6.1.4.1.6296.101.4.17.7.1 | |||
| sle2EthCfmMepInfoTable | 1.3.6.1.4.1.6296.101.4.17.7.1.1 | not-accessible | Description. | |
| sle2EthCfmMepInfoEntry | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmMepInfoId | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.1 | Integer32 | read-only | Description. |
| I32 sle2EthCfmMepInfoIfindex | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.2 | Integer32 | read-only | Description. |
| I32 sle2EthCfmMepInfoLocalVid | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.3 | Integer32 | read-only | Description. |
| INT sle2EthCfmMepInfoDirection | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.4 | INTEGER | read-only | Description. |
| INT sle2EthCfmMepInfoActive | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.5 | INTEGER | read-only | Description. |
| INT sle2EthCfmMepInfoUNI | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.6 | INTEGER | read-only | Description. |
| INT sle2EthCfmMepInfoCcmStatus | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.7 | INTEGER | read-only | Description. |
| INT sle2EthCfmMepInfoCcmType | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.8 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMepInfoCcmRmepId | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.9 | Integer32 | read-only | Description. |
| OCT sle2EthCfmMepInfoLocalMacAddr | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.10 | OCTET STRING | read-only | Description. |
| INT sle2EthCfmMepInfoRdi | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.11 | INTEGER | read-only | Description. |
| INT sle2EthCfmMepInfoService | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.12 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMepInfoLckLevel | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.13 | Integer32 | read-only | Description. |
| INT sle2EthCfmMepInfoDlmState | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.14 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMepInfoDlmRmepId | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.15 | Integer32 | read-only | Description. |
| INT sle2EthCfmMepInfoConnectivityStatus | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.16 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMepInfoInterval | 1.3.6.1.4.1.6296.101.4.17.7.1.1.1.17 | Integer32 | read-write | Description. |
| sle2EthCfmMepInfoControl | 1.3.6.1.4.1.6296.101.4.17.7.1.2 | |||
| INT sle2EthCfmMepInfoControlRequest | 1.3.6.1.4.1.6296.101.4.17.7.1.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmMepInfoControlStatus | 1.3.6.1.4.1.6296.101.4.17.7.1.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmMepInfoControlTimer | 1.3.6.1.4.1.6296.101.4.17.7.1.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmMepInfoControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.7.1.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmMepInfoControlReqResult | 1.3.6.1.4.1.6296.101.4.17.7.1.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmMepInfoControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.7.1.2.6 | Integer32 | read-write | Description. |
| OCT sle2EthCfmMepInfoControlMdName | 1.3.6.1.4.1.6296.101.4.17.7.1.2.7 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmMepInfoControlMaVid | 1.3.6.1.4.1.6296.101.4.17.7.1.2.8 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepInfoControlIfindex | 1.3.6.1.4.1.6296.101.4.17.7.1.2.9 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepInfoControlId | 1.3.6.1.4.1.6296.101.4.17.7.1.2.10 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepInfoControlLocalVid | 1.3.6.1.4.1.6296.101.4.17.7.1.2.11 | Integer32 | read-write | Description. |
| INT sle2EthCfmMepInfoControlMepDirection | 1.3.6.1.4.1.6296.101.4.17.7.1.2.12 | INTEGER | read-write | Description. |
| INT sle2EthCfmMepInfoControlActive | 1.3.6.1.4.1.6296.101.4.17.7.1.2.13 | INTEGER | read-write | Description. |
| INT sle2EthCfmMepInfoControlUNI | 1.3.6.1.4.1.6296.101.4.17.7.1.2.14 | INTEGER | read-write | Description. |
| INT sle2EthCfmMepInfoControlCcmStatus | 1.3.6.1.4.1.6296.101.4.17.7.1.2.15 | INTEGER | read-write | Description. |
| INT sle2EthCfmMepInfoControlFrameType | 1.3.6.1.4.1.6296.101.4.17.7.1.2.16 | INTEGER | read-write | Description. |
| I32 sle2EthCfmMepInfoControlRmepId | 1.3.6.1.4.1.6296.101.4.17.7.1.2.17 | Integer32 | read-write | Description. |
| INT sle2EthCfmMepInfoControlService | 1.3.6.1.4.1.6296.101.4.17.7.1.2.18 | INTEGER | read-write | Description. |
| INT sle2EthCfmMepInfoControlDlmState | 1.3.6.1.4.1.6296.101.4.17.7.1.2.19 | INTEGER | read-write | Description. |
| I32 sle2EthCfmMepInfoControlLckLevel | 1.3.6.1.4.1.6296.101.4.17.7.1.2.20 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepInfoControlTstPattern | 1.3.6.1.4.1.6296.101.4.17.7.1.2.21 | Integer32 | read-write | Description. |
| INT sle2EthCfmMepInfoControlTstRecursive | 1.3.6.1.4.1.6296.101.4.17.7.1.2.22 | INTEGER | read-write | Description. |
| I32 sle2EthCfmMepInfoControlDuration | 1.3.6.1.4.1.6296.101.4.17.7.1.2.23 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepInfoControlTstTxInterval | 1.3.6.1.4.1.6296.101.4.17.7.1.2.24 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepInfoControlTstLckInterval | 1.3.6.1.4.1.6296.101.4.17.7.1.2.25 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepInfoControlLckRmepId | 1.3.6.1.4.1.6296.101.4.17.7.1.2.26 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepInfoControlInterval | 1.3.6.1.4.1.6296.101.4.17.7.1.2.27 | Integer32 | read-write | Indicates interval value. 1: 100ms 2: 10ms 3: 1s 4: 10s |
| INT sle2EthCfmMepInfoControlTransMode | 1.3.6.1.4.1.6296.101.4.17.7.1.2.28 | INTEGER | read-write | Indicates the transmit mode. |
| sle2EthCfmMepInfoNotification | 1.3.6.1.4.1.6296.101.4.17.7.1.3 | |||
| NTF sle2EthCfmMepCreated | 1.3.6.1.4.1.6296.101.4.17.7.1.3.1 | Description. | ||
| NTF sle2EthCfmMepDestory | 1.3.6.1.4.1.6296.101.4.17.7.1.3.2 | Description. | ||
| NTF sle2EthCfmCcEnableChanged | 1.3.6.1.4.1.6296.101.4.17.7.1.3.3 | Description. | ||
| NTF sle2EthCfmServiceChanged | 1.3.6.1.4.1.6296.101.4.17.7.1.3.4 | Description. | ||
| NTF sle2EthCfmDualEndLmmChanged | 1.3.6.1.4.1.6296.101.4.17.7.1.3.5 | Description. | ||
| NTF sle2EthCfmTransmitUnicastTstFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.6 | Description. | ||
| NTF sle2EthCfmTransmitMulticastTstFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.7 | Description. | ||
| NTF sle2EthCfmTransmitUnicastLmFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.8 | Description. | ||
| NTF sle2EthCfmTransmitMulticastLmFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.9 | Description. | ||
| NTF sle2EthCfmTransmitUnicastDmFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.10 | Description. | ||
| NTF sle2EthCfmTransmitMuliticastDmFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.11 | Description. | ||
| NTF sle2EthCfmReceive1DmFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.12 | Description. | ||
| NTF sle2EthCfmTransmitTmFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.13 | Description. | ||
| NTF sle2EthCfmReceiveTmFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.14 | Description. | ||
| NTF sle2EthCfmTransmitExmFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.15 | Description. | ||
| NTF sle2EthCfmTransmitVsmFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.16 | Description. | ||
| NTF sle2EthCfmTransmitMccFinished | 1.3.6.1.4.1.6296.101.4.17.7.1.3.17 | Description. | ||
| sle2EthernetCfmMepAttributs | 1.3.6.1.4.1.6296.101.4.17.7.2 | |||
| sle2EthCfmMepAttrTable | 1.3.6.1.4.1.6296.101.4.17.7.2.1 | not-accessible | Description. | |
| sle2EthCfmMepAttrEntry | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1 | not-accessible | Description. | |
| INT sle2EthCfmMepAttrActive | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.1 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMepAttrCcmLtmPriority | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.2 | Integer32 | read-only | Description. |
| INT sle2EthCfmMepAttrLowPrDef | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.3 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMepAttrFngAlarmTime | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.4 | Integer32 | read-only | Description. |
| I32 sle2EthCfmMepAttrResetFngTime | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.5 | Integer32 | read-only | Description. |
| I32 sle2EthCfmMepAttrCcmLtmFlag | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.6 | Integer32 | read-only | Description. |
| OCT sle2EthCfmMepAttrTxLtmTargetMac | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.7 | OCTET STRING | read-only | Description. |
| I32 sle2EthCfmMepAttrTxLtmTargetMepId | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.8 | Integer32 | read-only | Description. |
| INT sle2EthCfmMepAttrTxLtmTargetIsMepId | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.9 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMepAttrTxLtmTtl | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.10 | Integer32 | read-only | Description. |
| OCT sle2EthCfmMepAttrTxLtmEgressId | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.11 | OCTET STRING | read-only | Description. |
| INT sle2EthCfmMepAttrTxLbmStatus | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.12 | INTEGER | read-only | Description. |
| OCT sle2EthCfmMepAttrTxLbmDestMac | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.13 | OCTET STRING | read-only | Description. |
| I32 sle2EthCfmMepAttrTxLbmDestMepId | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.14 | Integer32 | read-only | Description. |
| INT sle2EthCfmMepAttrTxLbmDestIsMepId | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.15 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMepAttrTxLbmMessages | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.16 | Integer32 | read-only | Description. |
| OCT sle2EthCfmMepAttrTxLbmDataTlv | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.17 | OCTET STRING | read-only | Description. |
| I32 sle2EthCfmMepAttrTxLbmVlanPriority | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.18 | Integer32 | read-only | Description. |
| INT sle2EthCfmMepAttrTxLbmVlanDropEnable | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.19 | INTEGER | read-only | Description. |
| I32 sle2EthCfmMepAttrTxLbmTimeOut | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.20 | Integer32 | read-only | Description. |
| I32 sle2EthCfmMepAttrLbrTimeOut | 1.3.6.1.4.1.6296.101.4.17.7.2.1.1.21 | Integer32 | read-only | Description. |
| sle2EthCfmMepAttrControl | 1.3.6.1.4.1.6296.101.4.17.7.2.2 | |||
| INT sle2EthCfmMepAttrControlRequest | 1.3.6.1.4.1.6296.101.4.17.7.2.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmMepAttrControlStatus | 1.3.6.1.4.1.6296.101.4.17.7.2.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmMepAttrControlTimer | 1.3.6.1.4.1.6296.101.4.17.7.2.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmMepAttrControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.7.2.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmMepAttrControlReqResult | 1.3.6.1.4.1.6296.101.4.17.7.2.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmMepAttrControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.7.2.2.6 | Integer32 | read-write | Description. |
| OCT sle2EthCfmMepAttrControlMdName | 1.3.6.1.4.1.6296.101.4.17.7.2.2.7 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmMepAttrControlMaVid | 1.3.6.1.4.1.6296.101.4.17.7.2.2.8 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepAttrControlMepId | 1.3.6.1.4.1.6296.101.4.17.7.2.2.9 | Integer32 | read-write | Description. |
| INT sle2EthCfmMepAttrControlActive | 1.3.6.1.4.1.6296.101.4.17.7.2.2.10 | INTEGER | read-write | Description. |
| I32 sle2EthCfmMepAttrControlCcmLtmPriority | 1.3.6.1.4.1.6296.101.4.17.7.2.2.11 | Integer32 | read-write | Description. |
| INT sle2EthCfmMepAttrContrlLowPrDef | 1.3.6.1.4.1.6296.101.4.17.7.2.2.12 | INTEGER | read-write | Description. |
| I32 sle2EthCfmMepAttrContrlFngAlarmTime | 1.3.6.1.4.1.6296.101.4.17.7.2.2.13 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepAttrControlResetFngTime | 1.3.6.1.4.1.6296.101.4.17.7.2.2.14 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepAttrControlCcmLtmFlag | 1.3.6.1.4.1.6296.101.4.17.7.2.2.15 | Integer32 | read-write | Description. |
| OCT sle2EthCfmMepAttrControlTxLtmTargetMac | 1.3.6.1.4.1.6296.101.4.17.7.2.2.16 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmMepAttrControlTxLtmTargetMepId | 1.3.6.1.4.1.6296.101.4.17.7.2.2.17 | Integer32 | read-write | Description. |
| INT sle2EthCfmMepAttrControlTxLtmTargetIsMepId | 1.3.6.1.4.1.6296.101.4.17.7.2.2.18 | INTEGER | read-write | Description. |
| I32 sle2EthCfmMepAttrControlTxLtmTtl | 1.3.6.1.4.1.6296.101.4.17.7.2.2.19 | Integer32 | read-write | Description. |
| OCT sle2EthCfmMepAttrControlTxLtmEgressId | 1.3.6.1.4.1.6296.101.4.17.7.2.2.20 | OCTET STRING | read-write | Description. |
| INT sle2EthCfmMepAttrControlTxLbmStatus | 1.3.6.1.4.1.6296.101.4.17.7.2.2.21 | INTEGER | read-write | Description. |
| OCT sle2EthCfmMepAttrControlTxLbmDestMacAddress | 1.3.6.1.4.1.6296.101.4.17.7.2.2.22 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmMepAttrControlTxLbmDestMepId | 1.3.6.1.4.1.6296.101.4.17.7.2.2.23 | Integer32 | read-write | Description. |
| INT sle2EthCfmMepAttrControlTxLbmDestIsMepId | 1.3.6.1.4.1.6296.101.4.17.7.2.2.24 | INTEGER | read-write | Description. |
| I32 sle2EthCfmMepAttrControlTxLbmMessages | 1.3.6.1.4.1.6296.101.4.17.7.2.2.25 | Integer32 | read-write | Description. |
| OCT sle2EthCfmMepAttrControlTxLbmDataTlv | 1.3.6.1.4.1.6296.101.4.17.7.2.2.26 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmMepAttrControlTxLbmVlanPriority | 1.3.6.1.4.1.6296.101.4.17.7.2.2.27 | Integer32 | read-write | Description. |
| INT sle2EthCfmMepAttrControlTxLbmVlanDropEnable | 1.3.6.1.4.1.6296.101.4.17.7.2.2.28 | INTEGER | read-write | Description. |
| I32 sle2EthCfmMepAttrControlTxLbmTimeOut | 1.3.6.1.4.1.6296.101.4.17.7.2.2.29 | Integer32 | read-write | Description. |
| I32 sle2EthCfmMepAttrControlLbrTimeOut | 1.3.6.1.4.1.6296.101.4.17.7.2.2.30 | Integer32 | read-write | Description. |
| sle2EthCfmMepAttrNotification | 1.3.6.1.4.1.6296.101.4.17.7.2.3 | |||
| NTF sle2EthCfmMepFaultProfileChanged | 1.3.6.1.4.1.6296.101.4.17.7.2.3.1 | Description. | ||
| NTF sle2EthCfmMepTxLtmProfileChanged | 1.3.6.1.4.1.6296.101.4.17.7.2.3.2 | Description. | ||
| NTF sle2EthCfmMepTxLbmProfileChanged | 1.3.6.1.4.1.6296.101.4.17.7.2.3.3 | Description. | ||
| NTF sle2EthCfmMepAuttributesAllCleared | 1.3.6.1.4.1.6296.101.4.17.7.2.3.4 | Description. | ||
| sle2EthernetCfmXcheck | 1.3.6.1.4.1.6296.101.4.17.8 | |||
| sle2EthCfmXcheckTable | 1.3.6.1.4.1.6296.101.4.17.8.1 | not-accessible | Description. | |
| sle2EthCfmXcheckEntry | 1.3.6.1.4.1.6296.101.4.17.8.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmXcheckRmepId | 1.3.6.1.4.1.6296.101.4.17.8.1.1.1 | Integer32 | read-only | Description. |
| OCT sle2EthCfmXcheckRmepMac | 1.3.6.1.4.1.6296.101.4.17.8.1.1.2 | OCTET STRING | read-only | Description. |
| sle2EthCfmXcheckControl | 1.3.6.1.4.1.6296.101.4.17.8.2 | |||
| INT sle2EthCfmXcheckControlRequest | 1.3.6.1.4.1.6296.101.4.17.8.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmXcheckControlStatus | 1.3.6.1.4.1.6296.101.4.17.8.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmXcheckControlTimer | 1.3.6.1.4.1.6296.101.4.17.8.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmXcheckControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.8.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmXcheckControlReqResult | 1.3.6.1.4.1.6296.101.4.17.8.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmXcheckControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.8.2.6 | Integer32 | read-write | Description. |
| OCT sle2EthCfmXcheckControlMdName | 1.3.6.1.4.1.6296.101.4.17.8.2.7 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmXcheckControlMaVid | 1.3.6.1.4.1.6296.101.4.17.8.2.8 | Integer32 | read-write | Description. |
| I32 sle2EthCfmXcheckControlRmepId | 1.3.6.1.4.1.6296.101.4.17.8.2.9 | Integer32 | read-write | Description. |
| OCT sle2EthCfmXcheckControlRmepMac | 1.3.6.1.4.1.6296.101.4.17.8.2.10 | OCTET STRING | read-write | Description. |
| sle2EthCfmXcheckNotification | 1.3.6.1.4.1.6296.101.4.17.8.3 | |||
| NTF sle2EthCfmXcheckMepCreated | 1.3.6.1.4.1.6296.101.4.17.8.3.1 | Description. | ||
| NTF sle2EthCfmXcheckMepDestoryed | 1.3.6.1.4.1.6296.101.4.17.8.3.2 | Description. | ||
| sle2EthernetCfmLoopback | 1.3.6.1.4.1.6296.101.4.17.9 | |||
| sle2EthCfmLoopbackTable | 1.3.6.1.4.1.6296.101.4.17.9.1 | not-accessible | Description. | |
| sle2EthCfmLoopbackEntry | 1.3.6.1.4.1.6296.101.4.17.9.1.1 | not-accessible | Description. | |
| INT sle2EthCfmLbFrameType | 1.3.6.1.4.1.6296.101.4.17.9.1.1.1 | INTEGER | read-only | Description. |
| I32 sle2EthCfmLbReceivedCount | 1.3.6.1.4.1.6296.101.4.17.9.1.1.2 | Integer32 | read-only | Description. |
| I32 sle2EthCfmLbTxMessages | 1.3.6.1.4.1.6296.101.4.17.9.1.1.3 | Integer32 | read-only | Description. |
| I32 sle2EthCfmLbResponseCount | 1.3.6.1.4.1.6296.101.4.17.9.1.1.4 | Integer32 | read-only | Description. |
| OCT sle2EthCfmLbRemoteMacAddress | 1.3.6.1.4.1.6296.101.4.17.9.1.1.5 | OCTET STRING | read-only | Description. |
| sle2EthCfmLoopbackControl | 1.3.6.1.4.1.6296.101.4.17.9.2 | |||
| INT sle2EthCfmLbControlRequest | 1.3.6.1.4.1.6296.101.4.17.9.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmLbControlStatus | 1.3.6.1.4.1.6296.101.4.17.9.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmLbControlTimer | 1.3.6.1.4.1.6296.101.4.17.9.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmLbControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.9.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmLbControlReqResult | 1.3.6.1.4.1.6296.101.4.17.9.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmLbControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.9.2.6 | Integer32 | read-write | Description. |
| OCT sle2EthCfmLbControlMdName | 1.3.6.1.4.1.6296.101.4.17.9.2.7 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmLbControlMaVid | 1.3.6.1.4.1.6296.101.4.17.9.2.8 | Integer32 | read-write | Description. |
| I32 sle2EthCfmLbControlMepId | 1.3.6.1.4.1.6296.101.4.17.9.2.9 | Integer32 | read-write | Description. |
| I32 sle2EthCfmLbControlMdLevel | 1.3.6.1.4.1.6296.101.4.17.9.2.10 | Integer32 | read-write | Description. |
| I32 sle2EthCfmLbControlRmepId | 1.3.6.1.4.1.6296.101.4.17.9.2.11 | Integer32 | read-write | Description. |
| OCT sle2EthCfmLbControlRmepMac | 1.3.6.1.4.1.6296.101.4.17.9.2.12 | OCTET STRING | read-write | Description. |
| INT sle2EthCfmLbControlTlvType | 1.3.6.1.4.1.6296.101.4.17.9.2.13 | INTEGER | read-write | Description. |
| I32 sle2EthCfmLbControlTlvData | 1.3.6.1.4.1.6296.101.4.17.9.2.14 | Integer32 | read-write | Description. |
| INT sle2EthCfmLbControlTlvTest | 1.3.6.1.4.1.6296.101.4.17.9.2.15 | INTEGER | read-write | Description. |
| INT sle2EthCfmLbControlRecursive | 1.3.6.1.4.1.6296.101.4.17.9.2.16 | INTEGER | read-write | Description. |
| sle2EthCfmLoopbackNotification | 1.3.6.1.4.1.6296.101.4.17.9.3 | |||
| NTF sle2EthCfmLbTransmitMulticastFinished | 1.3.6.1.4.1.6296.101.4.17.9.3.1 | Description. | ||
| NTF sle2EthCfmLbTransmitUnicastFinished | 1.3.6.1.4.1.6296.101.4.17.9.3.2 | Description. | ||
| NTF sle2EthCfmLbTransmitMacFinished | 1.3.6.1.4.1.6296.101.4.17.9.3.3 | Description. | ||
| NTF sle2EthCfmLbrFinished | 1.3.6.1.4.1.6296.101.4.17.9.3.4 | Description. | ||
| sle2EthernetCfmLinkTrace | 1.3.6.1.4.1.6296.101.4.17.10 | |||
| sle2EthCfmLinkTraceTable | 1.3.6.1.4.1.6296.101.4.17.10.1 | not-accessible | Description. | |
| sle2EthCfmLinkTraceEntry | 1.3.6.1.4.1.6296.101.4.17.10.1.1 | not-accessible | Description. | |
| OCT sle2EthCfmLtrMepMac | 1.3.6.1.4.1.6296.101.4.17.10.1.1.1 | OCTET STRING | read-only | Description. |
| I32 sle2EthCfmLtrHops | 1.3.6.1.4.1.6296.101.4.17.10.1.1.2 | Integer32 | read-only | Description. |
| INT sle2EthCfmLtrRelay | 1.3.6.1.4.1.6296.101.4.17.10.1.1.3 | INTEGER | read-only | Description. |
| INT sle2EthCfmLtrIngressEgress | 1.3.6.1.4.1.6296.101.4.17.10.1.1.4 | INTEGER | read-only | Description. |
| INT sle2EthCfmLtrIngress | 1.3.6.1.4.1.6296.101.4.17.10.1.1.5 | INTEGER | read-only | Description. |
| INT sle2EthCfmLtrEgress | 1.3.6.1.4.1.6296.101.4.17.10.1.1.6 | INTEGER | read-only | Description. |
| sle2EthCfmLinkTraceControl | 1.3.6.1.4.1.6296.101.4.17.10.2 | |||
| INT sle2EthCfmLtControlRequest | 1.3.6.1.4.1.6296.101.4.17.10.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmLtControlStatus | 1.3.6.1.4.1.6296.101.4.17.10.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmLtControlTimer | 1.3.6.1.4.1.6296.101.4.17.10.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmLtControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.10.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmLtControlReqResult | 1.3.6.1.4.1.6296.101.4.17.10.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmLtControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.10.2.6 | Integer32 | read-write | Description. |
| OCT sle2EthCfmLtControlMdName | 1.3.6.1.4.1.6296.101.4.17.10.2.7 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmLtControlMaVid | 1.3.6.1.4.1.6296.101.4.17.10.2.8 | Integer32 | read-write | Description. |
| I32 sle2EthCfmLtControlLevel | 1.3.6.1.4.1.6296.101.4.17.10.2.9 | Integer32 | read-write | Description. |
| OCT sle2EthCfmLtControlRmepMac | 1.3.6.1.4.1.6296.101.4.17.10.2.10 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmLtControlMepId | 1.3.6.1.4.1.6296.101.4.17.10.2.11 | Integer32 | read-write | indicates mepid of local. |
| sle2EthCfmLinkTraceNotification | 1.3.6.1.4.1.6296.101.4.17.10.3 | |||
| NTF sle2EthCfmLtTransmitDomainFinished | 1.3.6.1.4.1.6296.101.4.17.10.3.1 | Description. | ||
| NTF sle2EthCfmLtTransmitLevelFinished | 1.3.6.1.4.1.6296.101.4.17.10.3.2 | Description. | ||
| NTF sle2EthCfmLtrFinished | 1.3.6.1.4.1.6296.101.4.17.10.3.3 | Description. | ||
| sle2EthernetCfmAis | 1.3.6.1.4.1.6296.101.4.17.11 | |||
| sle2EthernetCfmAisInfo | 1.3.6.1.4.1.6296.101.4.17.11.1 | |||
| sle2EthCfmAisInfoTable | 1.3.6.1.4.1.6296.101.4.17.11.1.1 | not-accessible | Description. | |
| sle2EthCfmAisInfoEntry | 1.3.6.1.4.1.6296.101.4.17.11.1.1.1 | not-accessible | Description. | |
| INT sle2EthCfmAisInfoStatus | 1.3.6.1.4.1.6296.101.4.17.11.1.1.1.1 | INTEGER | read-only | Description. |
| INT sle2EthCfmAisInfoDefectConditions | 1.3.6.1.4.1.6296.101.4.17.11.1.1.1.2 | INTEGER | read-only | Description. |
| I32 sle2EthCfmAisInfoLevel | 1.3.6.1.4.1.6296.101.4.17.11.1.1.1.3 | Integer32 | read-only | Description. |
| INT sle2EthCfmAisInfoFrameType | 1.3.6.1.4.1.6296.101.4.17.11.1.1.1.4 | INTEGER | read-only | Description. |
| OCT sle2EthCfmAisInfoRmepMac | 1.3.6.1.4.1.6296.101.4.17.11.1.1.1.5 | OCTET STRING | read-only | Description. |
| I32 sle2EthCfmAisInfoInterval | 1.3.6.1.4.1.6296.101.4.17.11.1.1.1.6 | Integer32 | read-only | Description. |
| INT sle2EthCfmAisInfoReceivedDefectConditions | 1.3.6.1.4.1.6296.101.4.17.11.1.1.1.7 | INTEGER | read-only | Description. |
| INT sle2EthCfmAisInfoLastReceivedDefectCondition | 1.3.6.1.4.1.6296.101.4.17.11.1.1.1.8 | INTEGER | read-only | Description. |
| sle2EthCfmAisInfoControl | 1.3.6.1.4.1.6296.101.4.17.11.1.2 | |||
| INT sle2EthCfmAisInfoControlRequest | 1.3.6.1.4.1.6296.101.4.17.11.1.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmAisInfoControlStatus | 1.3.6.1.4.1.6296.101.4.17.11.1.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmAisInfoControlTimer | 1.3.6.1.4.1.6296.101.4.17.11.1.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmAisInfoControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.11.1.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmAisInfoControlReqResult | 1.3.6.1.4.1.6296.101.4.17.11.1.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmAisInfoControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.11.1.2.6 | Integer32 | read-write | Description. |
| OCT sle2EthCfmAisInfoControlMdName | 1.3.6.1.4.1.6296.101.4.17.11.1.2.7 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmAisInfoControlMaVid | 1.3.6.1.4.1.6296.101.4.17.11.1.2.8 | Integer32 | read-write | Description. |
| I32 sle2EthCfmAisInfoControlMepId | 1.3.6.1.4.1.6296.101.4.17.11.1.2.9 | Integer32 | read-write | Description. |
| INT sle2EthCfmAisInfoControlEnable | 1.3.6.1.4.1.6296.101.4.17.11.1.2.10 | INTEGER | read-write | Description. |
| INT sle2EthCfmAisInfoControlDefectConditions | 1.3.6.1.4.1.6296.101.4.17.11.1.2.11 | INTEGER | read-write | Description. |
| I32 sle2EthCfmAisInfoControlLevel | 1.3.6.1.4.1.6296.101.4.17.11.1.2.12 | Integer32 | read-write | Description. |
| INT sle2EthCfmAisInfoControlFrameType | 1.3.6.1.4.1.6296.101.4.17.11.1.2.13 | INTEGER | read-write | Description. |
| OCT sle2EthCfmAisInfoControlRmepMac | 1.3.6.1.4.1.6296.101.4.17.11.1.2.14 | OCTET STRING | read-write | Description. |
| I32 sle2EthCfmAisInfoControlInterval | 1.3.6.1.4.1.6296.101.4.17.11.1.2.15 | Integer32 | read-write | Description. |
| sle2EthCfmAisInfoNotification | 1.3.6.1.4.1.6296.101.4.17.11.1.3 | |||
| NTF sle2EthCfmAisInfoStatusChanged | 1.3.6.1.4.1.6296.101.4.17.11.1.3.1 | Description. | ||
| NTF sle2EthCfmAisInfoIntervalChanged | 1.3.6.1.4.1.6296.101.4.17.11.1.3.2 | Description. | ||
| sle2EthernetCfmSrvAis | 1.3.6.1.4.1.6296.101.4.17.11.2 | |||
| sle2EthCfmSrvAisTable | 1.3.6.1.4.1.6296.101.4.17.11.2.1 | not-accessible | Description. | |
| sle2EthCfmSrvAisEntry | 1.3.6.1.4.1.6296.101.4.17.11.2.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmSrvAisIfIndex | 1.3.6.1.4.1.6296.101.4.17.11.2.1.1.1 | Integer32 | read-only | Description. |
| INT sle2EthCfmSrvAisEnable | 1.3.6.1.4.1.6296.101.4.17.11.2.1.1.2 | INTEGER | read-only | Description. |
| I32 sle2EthCfmSrvAislevel | 1.3.6.1.4.1.6296.101.4.17.11.2.1.1.3 | Integer32 | read-only | Description. |
| I32 sle2EthCfmSrvAisInterval | 1.3.6.1.4.1.6296.101.4.17.11.2.1.1.4 | Integer32 | read-only | Description. |
| sle2EthCfmSrvAisControl | 1.3.6.1.4.1.6296.101.4.17.11.2.2 | |||
| INT sle2EthCfmSrvAisControlRequest | 1.3.6.1.4.1.6296.101.4.17.11.2.2.1 | INTEGER | read-write | Description. |
| SLE sle2EthCfmSrvAisControlStatus | 1.3.6.1.4.1.6296.101.4.17.11.2.2.2 | SleControlStatusType | read-write | Description. |
| G32 sle2EthCfmSrvAisControlTimer | 1.3.6.1.4.1.6296.101.4.17.11.2.2.3 | Gauge32 | read-write | Description. |
| TIK sle2EthCfmSrvAisControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.11.2.2.4 | TimeTicks | read-write | Description. |
| SLE sle2EthCfmSrvAisControlReqResult | 1.3.6.1.4.1.6296.101.4.17.11.2.2.5 | SleControlRequestResultType | read-write | Description. |
| I32 sle2EthCfmSrvAisControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.11.2.2.6 | Integer32 | read-write | Description. |
| I32 sle2EthCfmSrvAisControlIfIndex | 1.3.6.1.4.1.6296.101.4.17.11.2.2.7 | Integer32 | read-write | Description. |
| INT sle2EthCfmSrvAisControlEnable | 1.3.6.1.4.1.6296.101.4.17.11.2.2.8 | INTEGER | read-write | Description. |
| I32 sle2EthCfmSrvAisControlLevel | 1.3.6.1.4.1.6296.101.4.17.11.2.2.9 | Integer32 | read-write | Description. |
| I32 sle2EthCfmSrvAisControlInterval | 1.3.6.1.4.1.6296.101.4.17.11.2.2.10 | Integer32 | read-write | Description. |
| sle2EthCfmSrvAisNotification | 1.3.6.1.4.1.6296.101.4.17.11.2.3 | |||
| NTF sle2EthCfmSrvAisChanged | 1.3.6.1.4.1.6296.101.4.17.11.2.3.1 | Description. | ||
| sle2EthernetCfmLmStatus | 1.3.6.1.4.1.6296.101.4.17.12 | |||
| sle2EthCfmLmmStatusTable | 1.3.6.1.4.1.6296.101.4.17.12.1 | not-accessible | Description. | |
| sle2EthCfmLmmStatusEntry | 1.3.6.1.4.1.6296.101.4.17.12.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmLmmStatusRmepId | 1.3.6.1.4.1.6296.101.4.17.12.1.1.1 | Integer32 | read-only | Description. |
| TIK sle2EthCfmLmmStatusStartTime | 1.3.6.1.4.1.6296.101.4.17.12.1.1.2 | TimeTicks | read-only | Description. |
| TIK sle2EthCfmLmmStatusCurrentTime | 1.3.6.1.4.1.6296.101.4.17.12.1.1.3 | TimeTicks | read-only | Description. |
| TIK sle2EthCfmLmmStatusEndTime | 1.3.6.1.4.1.6296.101.4.17.12.1.1.4 | TimeTicks | read-only | Description. |
| I32 sle2EthCfmLmmStatusNeerLoss | 1.3.6.1.4.1.6296.101.4.17.12.1.1.5 | Integer32 | read-only | Description. |
| I32 sle2EthCfmLmmStatusFarLoss | 1.3.6.1.4.1.6296.101.4.17.12.1.1.6 | Integer32 | read-only | Description. |
| I32 sle2EthCfmLmmStatusCurNeerLoss | 1.3.6.1.4.1.6296.101.4.17.12.1.1.7 | Integer32 | read-only | Description. |
| I32 sle2EthCfmLmmStatusCurFarLoss | 1.3.6.1.4.1.6296.101.4.17.12.1.1.8 | Integer32 | read-only | Description. |
| sle2EthernetCfmRmep | 1.3.6.1.4.1.6296.101.4.17.13 | |||
| sle2EthCfmRmepTable | 1.3.6.1.4.1.6296.101.4.17.13.1 | not-accessible | Description. | |
| sle2EthCfmRmepEntry | 1.3.6.1.4.1.6296.101.4.17.13.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmRmepId | 1.3.6.1.4.1.6296.101.4.17.13.1.1.1 | Integer32 | read-only | Indicates mepid of remote. |
| I32 sle2EthCfmRempMepId | 1.3.6.1.4.1.6296.101.4.17.13.1.1.2 | Integer32 | read-write | Description. |
| I32 sle2EthCfmRmepLevel | 1.3.6.1.4.1.6296.101.4.17.13.1.1.3 | Integer32 | read-only | Indicates the maintenance domain level. |
| I32 sle2EthCfmRmepMaVid | 1.3.6.1.4.1.6296.101.4.17.13.1.1.4 | Integer32 | read-only | The VLAN Identifier. 0: default Ma vid |
| INT sle2EthCfmRmepActiveState | 1.3.6.1.4.1.6296.101.4.17.13.1.1.5 | INTEGER | read-only | Indicates active status. |
| OCT sle2EthCfmRmepRemoteMac | 1.3.6.1.4.1.6296.101.4.17.13.1.1.6 | OCTET STRING | read-only | Indicates the remote mac address. |
| INT sle2EthCfmRmepRdi | 1.3.6.1.4.1.6296.101.4.17.13.1.1.7 | INTEGER | read-only | Indicates the RDI flags. |
| INT sle2EthCfmRmepFlags | 1.3.6.1.4.1.6296.101.4.17.13.1.1.8 | INTEGER | read-only | Indicates configure status |
| sle2EthCfmRmepControl | 1.3.6.1.4.1.6296.101.4.17.13.2 | |||
| INT sle2EthCfmRmepControlRequest | 1.3.6.1.4.1.6296.101.4.17.13.2.1 | INTEGER | read-write | The request of a user command |
| SLE sle2EthCfmRmepControlStatus | 1.3.6.1.4.1.6296.101.4.17.13.2.2 | SleControlStatusType | read-write | The status of user command |
| G32 sle2EthCfmRmepControlTimer | 1.3.6.1.4.1.6296.101.4.17.13.2.3 | Gauge32 | read-write | The maximum time for the manager for a long running user command |
| TIK sle2EthCfmRmepControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.13.2.4 | TimeTicks | read-write | The time stamp of the last command(end of command) |
| SLE sle2EthCfmRmepControlReqResult | 1.3.6.1.4.1.6296.101.4.17.13.2.5 | SleControlRequestResultType | read-write | Result of the last command. |
| I32 sle2EthCfmRmepControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.13.2.6 | Integer32 | read-write | Indicates bridgegroup id 1: default bridge id |
| OCT sle2EthCfmRmepControlMdName | 1.3.6.1.4.1.6296.101.4.17.13.2.7 | OCTET STRING | read-write | The maintenance domain name. |
| I32 sle2EthCfmRmepControlMdLevel | 1.3.6.1.4.1.6296.101.4.17.13.2.8 | Integer32 | read-write | Indicates the maintenance domain level. |
| sle2EthCfmRmepNotification | 1.3.6.1.4.1.6296.101.4.17.13.3 | |||
| NTF sle2EthCfmRmepDomainCleared | 1.3.6.1.4.1.6296.101.4.17.13.3.1 | clearRmepDomain | ||
| NTF sle2EthCfmRmepLevelCleared | 1.3.6.1.4.1.6296.101.4.17.13.3.2 | clearRmepLevel | ||
| sle2EthernetCfmMip | 1.3.6.1.4.1.6296.101.4.17.14 | |||
| sle2EthCfmMipTable | 1.3.6.1.4.1.6296.101.4.17.14.1 | not-accessible | Description. | |
| sle2EthCfmMipEntry | 1.3.6.1.4.1.6296.101.4.17.14.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmMipVid | 1.3.6.1.4.1.6296.101.4.17.14.1.1.1 | Integer32 | read-only | Description. |
| I32 sle2EthCfmMipMdLevel | 1.3.6.1.4.1.6296.101.4.17.14.1.1.2 | Integer32 | read-only | Indicates the maintenance domain level. |
| I32 sle2EthCfmMipIfindex | 1.3.6.1.4.1.6296.101.4.17.14.1.1.3 | Integer32 | read-only | Indcates the port interface index. |
| OCT sle2EthCfmMipLocalMac | 1.3.6.1.4.1.6296.101.4.17.14.1.1.4 | OCTET STRING | read-only | The mac address of local mep. |
| sle2EthernetCfmStatistics | 1.3.6.1.4.1.6296.101.4.17.15 | |||
| sle2EthCfmStatisticsTable | 1.3.6.1.4.1.6296.101.4.17.15.1 | not-accessible | Description. | |
| sle2EthCfmStatisticsEntry | 1.3.6.1.4.1.6296.101.4.17.15.1.1 | not-accessible | Description. | |
| G32 sle2EthCfmStatCcmSent | 1.3.6.1.4.1.6296.101.4.17.15.1.1.1 | Gauge32 | read-only | Indicates the ccm packet number. |
| G32 sle2EthCfmStatCcmRevOutOfSeq | 1.3.6.1.4.1.6296.101.4.17.15.1.1.2 | Gauge32 | read-only | Indicates the received out of sequence number. |
| G32 sle2EthCfmStatLbrSent | 1.3.6.1.4.1.6296.101.4.17.15.1.1.3 | Gauge32 | read-only | Indicates the lbr packet number. |
| G32 sle2EthCfmStatLbrRevValid | 1.3.6.1.4.1.6296.101.4.17.15.1.1.4 | Gauge32 | read-only | Indicates the valid lbr packet number. |
| G32 sle2EthCfmStatLbrRevBadMsdu | 1.3.6.1.4.1.6296.101.4.17.15.1.1.5 | Gauge32 | read-only | Indicates the bad lbr packet number. |
| G32 sle2EthCfmStatLbrRevOutOfSeq | 1.3.6.1.4.1.6296.101.4.17.15.1.1.6 | Gauge32 | read-only | Indicates the received out of sequence number. |
| C32 sle2EthCfmStatLtrRevUnexpected | 1.3.6.1.4.1.6296.101.4.17.15.1.1.7 | Counter32 | read-only | Indicates the unexected received lbr packet number. |
| sle2EthernetCfmActiveLevel | 1.3.6.1.4.1.6296.101.4.17.16 | |||
| sle2EthCfmActiveLevelTable | 1.3.6.1.4.1.6296.101.4.17.16.1 | not-accessible | Description. | |
| sle2EthCfmActiveLevelEntry | 1.3.6.1.4.1.6296.101.4.17.16.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmAcitveLevelIfIndex | 1.3.6.1.4.1.6296.101.4.17.16.1.1.1 | Integer32 | read-write | The interface index. |
| BIT sle2EthCfmActiveLevelStatus | 1.3.6.1.4.1.6296.101.4.17.16.1.1.2 | Bits | read-only | Indicates status of active level |
| sle2EthernetCfmError | 1.3.6.1.4.1.6296.101.4.17.17 | |||
| sle2EthCfmErrorTable | 1.3.6.1.4.1.6296.101.4.17.17.1 | not-accessible | Description. | |
| sle2EthCfmErrorEntry | 1.3.6.1.4.1.6296.101.4.17.17.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmErrorIndex | 1.3.6.1.4.1.6296.101.4.17.17.1.1.1 | Integer32 | read-only | Indicates the error index. |
| I32 sle2EthCfmErrorMdLevel | 1.3.6.1.4.1.6296.101.4.17.17.1.1.2 | Integer32 | read-only | Indicates level of MD. |
| I32 sle2EthCfmErrorMaVid | 1.3.6.1.4.1.6296.101.4.17.17.1.1.3 | Integer32 | read-only | The VLAN Identifier. 0: default Ma vid |
| I32 sle2EthCfmErrorMepId | 1.3.6.1.4.1.6296.101.4.17.17.1.1.4 | Integer32 | read-only | The MA end point ID. |
| OCT sle2EthCfmErrorRmepMac | 1.3.6.1.4.1.6296.101.4.17.17.1.1.5 | OCTET STRING | read-only | Indicates mac address of remote mep |
| INT sle2EthCfmErrorReason | 1.3.6.1.4.1.6296.101.4.17.17.1.1.6 | INTEGER | read-only | Indicates error reason. |
| OCT sle2EthCfmErrorServiceId | 1.3.6.1.4.1.6296.101.4.17.17.1.1.7 | OCTET STRING | read-only | The maintenance association name. |
| sle2EthCfmErrorControl | 1.3.6.1.4.1.6296.101.4.17.17.2 | |||
| INT sle2EthCfmErrorControlRequest | 1.3.6.1.4.1.6296.101.4.17.17.2.1 | INTEGER | read-write | The request of a user command |
| SLE sle2EthCfmErrorControlStatus | 1.3.6.1.4.1.6296.101.4.17.17.2.2 | SleControlStatusType | read-write | The status of user command |
| G32 sle2EthCfmErrorControlTimer | 1.3.6.1.4.1.6296.101.4.17.17.2.3 | Gauge32 | read-write | The maximum time for the manager for a long running user command |
| TIK sle2EthCfmErrorControlTimeStamp | 1.3.6.1.4.1.6296.101.4.17.17.2.4 | TimeTicks | read-write | The time stamp of the last command(end of command) |
| SLE sle2EthCfmErrorControlReqResult | 1.3.6.1.4.1.6296.101.4.17.17.2.5 | SleControlRequestResultType | read-write | Result of the last command. |
| I32 sle2EthCfmErrorControlBridgeId | 1.3.6.1.4.1.6296.101.4.17.17.2.6 | Integer32 | read-write | Indicates bridgegroup id 1: default bridge id |
| OCT sle2EthCfmErrorControlMdName | 1.3.6.1.4.1.6296.101.4.17.17.2.7 | OCTET STRING | read-write | The maintenance domain name. |
| I32 sle2EthCfmErrorControlMdLevel | 1.3.6.1.4.1.6296.101.4.17.17.2.8 | Integer32 | read-write | Indicates level of MD. |
| sle2EthCfmErrorNotification | 1.3.6.1.4.1.6296.101.4.17.17.3 | |||
| NTF sle2EthCfmErrorDomainCleared | 1.3.6.1.4.1.6296.101.4.17.17.3.1 | clearCfmErrorDomain | ||
| NTF sle2EthCfmErrorLevelCleared | 1.3.6.1.4.1.6296.101.4.17.17.3.2 | clearCfmErrorLevel | ||
| sle2EthernetCfmLtCache | 1.3.6.1.4.1.6296.101.4.17.18 | |||
| sle2EthCfmLtCacheTable | 1.3.6.1.4.1.6296.101.4.17.18.1 | not-accessible | Description. | |
| sle2EthCfmLtCacheEntry | 1.3.6.1.4.1.6296.101.4.17.18.1.1 | not-accessible | Description. | |
| I32 sle2EthCfmLtCacheIndex | 1.3.6.1.4.1.6296.101.4.17.18.1.1.1 | Integer32 | read-only | Indicates the linktrace cache index. |
| OCT sle2EthCfmLtCacheSrcMac | 1.3.6.1.4.1.6296.101.4.17.18.1.1.2 | OCTET STRING | read-only | Indicates MAC address. (SIZE (6)) |
| I32 sle2EthCfmLtCacheHops | 1.3.6.1.4.1.6296.101.4.17.18.1.1.3 | Integer32 | read-only | Indicates TTL field value for a returned LTR. |
| INT sle2EthCfmLtCacheRelay | 1.3.6.1.4.1.6296.101.4.17.18.1.1.4 | INTEGER | read-only | Indicates the value returned in the Relay Action field |
| sle2Erps | 1.3.6.1.4.1.6296.101.4.18 | |||
| sle2ErpsPhyRing | 1.3.6.1.4.1.6296.101.4.18.1 | |||
| sle2ErpsPhyRingTable | 1.3.6.1.4.1.6296.101.4.18.1.1 | not-accessible | Description. | |
| sle2ErpsPhyRingEntry | 1.3.6.1.4.1.6296.101.4.18.1.1.1 | not-accessible | Description. | |
| I32 sle2ErpsPhyRingBridgeId | 1.3.6.1.4.1.6296.101.4.18.1.1.1.1 | Integer32 | read-only | Indicates primary bridgegroup id 1: default bridge id 100: backbone |
| OCT sle2ErpsPhyRingName | 1.3.6.1.4.1.6296.101.4.18.1.1.1.2 | OCTET STRING | read-only | Physical ring name (maximum 37 characters). |
| I32 sle2ErpsPhyRingEastPort | 1.3.6.1.4.1.6296.101.4.18.1.1.1.3 | Integer32 | read-only | Indicates the Ring Nodes east port(ifindex) |
| I32 sle2ErpsPhyRingEastMepId | 1.3.6.1.4.1.6296.101.4.18.1.1.1.4 | Integer32 | read-only | Description. |
| I32 sle2ErpsPhyRingEastRmepId | 1.3.6.1.4.1.6296.101.4.18.1.1.1.5 | Integer32 | read-only | Description. |
| I32 sle2ErpsPhyRingWestPort | 1.3.6.1.4.1.6296.101.4.18.1.1.1.6 | Integer32 | read-only | Indicates the Ring Nodes west port(ifindex) |
| I32 sle2ErpsPhyRingWestMepId | 1.3.6.1.4.1.6296.101.4.18.1.1.1.7 | Integer32 | read-only | Description. |
| I32 sle2ErpsPhyRingWestRmepId | 1.3.6.1.4.1.6296.101.4.18.1.1.1.8 | Integer32 | read-only | Description. |
| sle2ErpsPhyRingControl | 1.3.6.1.4.1.6296.101.4.18.1.2 | |||
| INT sle2ErpsPhyRingControlRequest | 1.3.6.1.4.1.6296.101.4.18.1.2.1 | INTEGER | read-write | The request of a user command |
| SLE sle2ErpsPhyRingControlStatus | 1.3.6.1.4.1.6296.101.4.18.1.2.2 | SleControlStatusType | read-write | The status of user command |
| G32 sle2ErpsPhyRingControlTimer | 1.3.6.1.4.1.6296.101.4.18.1.2.3 | Gauge32 | read-write | The maximum time for the manager for a long running user command |
| TIK sle2ErpsPhyRingControlTimeStamp | 1.3.6.1.4.1.6296.101.4.18.1.2.4 | TimeTicks | read-write | The time stamp of the last command(end of command) |
| SLE sle2ErpsPhyRingControlReqResult | 1.3.6.1.4.1.6296.101.4.18.1.2.5 | SleControlRequestResultType | read-write | Result of the last command. |
| I32 sle2ErpsPhyRingControlBridgeId | 1.3.6.1.4.1.6296.101.4.18.1.2.6 | Integer32 | read-write | Indicates primary bridgegroup id 1: default bridge id 100: backbone |
| OCT sle2ErpsPhyRingControName | 1.3.6.1.4.1.6296.101.4.18.1.2.7 | OCTET STRING | read-write | Physical ring name (maximum 37 characters). |
| INT sle2ErpsPhyRingControEastPort | 1.3.6.1.4.1.6296.101.4.18.1.2.8 | INTEGER | read-write | Indicates the Ring Nodes east interface index |
| INT sle2ErpsPhyRingControWestPort | 1.3.6.1.4.1.6296.101.4.18.1.2.9 | INTEGER | read-write | Indicates the Ring Nodes west interface index |
| I32 sle2ErpsPhyRingControlMepId | 1.3.6.1.4.1.6296.101.4.18.1.2.10 | Integer32 | read-write | Description. |
| I32 sle2ErpsPhyRingControlRmepId | 1.3.6.1.4.1.6296.101.4.18.1.2.11 | Integer32 | read-write | Description. |
| sleErpsPhyRingNotification | 1.3.6.1.4.1.6296.101.4.18.1.3 | |||
| NTF sle2ErpsPhyRingCreated | 1.3.6.1.4.1.6296.101.4.18.1.3.1 | createPhyRing | ||
| NTF sle2ErpsPhyRingDestoryed | 1.3.6.1.4.1.6296.101.4.18.1.3.2 | destoryPhyRing | ||
| NTF sle2ErpsPhyRingEastPortAdded | 1.3.6.1.4.1.6296.101.4.18.1.3.3 | Description. | ||
| NTF sle2ErpsPhyRingEastPortDeleted | 1.3.6.1.4.1.6296.101.4.18.1.3.4 | Description. | ||
| NTF sle2ErpsPhyRingWestPortAdded | 1.3.6.1.4.1.6296.101.4.18.1.3.5 | Description. | ||
| NTF sle2ErpsPhyRingWestPortDeleted | 1.3.6.1.4.1.6296.101.4.18.1.3.6 | Description. | ||
| NTF sle2ErpsPhyRingEastMepIdAdded | 1.3.6.1.4.1.6296.101.4.18.1.3.7 | Description. | ||
| NTF sle2ErpsPhyRingEastMepIdDeleted | 1.3.6.1.4.1.6296.101.4.18.1.3.8 | Description. | ||
| NTF sle2ErpsPhyRingWestMepIdAdded | 1.3.6.1.4.1.6296.101.4.18.1.3.9 | Description. | ||
| NTF sle2ErpsPhyRingWestMepIdDeleted | 1.3.6.1.4.1.6296.101.4.18.1.3.10 | Description. | ||
| sle2ErpsProfile | 1.3.6.1.4.1.6296.101.4.18.2 | |||
| sle2ErpsProfileTable | 1.3.6.1.4.1.6296.101.4.18.2.1 | not-accessible | Description. | |
| sle2ErpsProfileEntry | 1.3.6.1.4.1.6296.101.4.18.2.1.1 | not-accessible | Description. | |
| I32 sle2ErpsProfileBridgeId | 1.3.6.1.4.1.6296.101.4.18.2.1.1.1 | Integer32 | read-only | Indicates primary bridgegroup id 1: default bridge id 100: backbone |
| OCT sle2ErpsProfileName | 1.3.6.1.4.1.6296.101.4.18.2.1.1.2 | OCTET STRING | read-only | Profile name (maximum 32 characters). |
| INT sle2ErpsProfileHoldOffTime | 1.3.6.1.4.1.6296.101.4.18.2.1.1.3 | INTEGER | read-only | Indicates the hold-off time default : 0 |
| INT sle2ErpsProfileGuardTime | 1.3.6.1.4.1.6296.101.4.18.2.1.1.4 | INTEGER | read-only | Indicates the guard time default : 500 |
| INT sle2ErpsProfileWaitToRestore | 1.3.6.1.4.1.6296.101.4.18.2.1.1.5 | INTEGER | read-only | Indicates the wait-to-restore time default : 5 |
| INT sle2ErpsProfileNonRevertive | 1.3.6.1.4.1.6296.101.4.18.2.1.1.6 | INTEGER | read-only | The Non-Revertive or Revertive. |
| sle2ErpsProfileControl | 1.3.6.1.4.1.6296.101.4.18.2.2 | |||
| INT sle2ErpsProfileControlRequest | 1.3.6.1.4.1.6296.101.4.18.2.2.1 | INTEGER | read-write | The request of a user command |
| SLE sle2ErpsProfileControlStatus | 1.3.6.1.4.1.6296.101.4.18.2.2.2 | SleControlStatusType | read-write | The status of user command |
| G32 sle2ErpsProfileControlTimer | 1.3.6.1.4.1.6296.101.4.18.2.2.3 | Gauge32 | read-write | The maximum time for the manager for a long running user command |
| TIK sle2ErpsProfileControlTimeStamp | 1.3.6.1.4.1.6296.101.4.18.2.2.4 | TimeTicks | read-write | The time stamp of the last command(end of command) |
| SLE sle2ErpsProfileControlReqResult | 1.3.6.1.4.1.6296.101.4.18.2.2.5 | SleControlStatusType | read-write | Result of the last command. |
| I32 sle2ErpsProfileControlBridgeId | 1.3.6.1.4.1.6296.101.4.18.2.2.6 | Integer32 | read-write | Indicates primary bridgegroup id 1: default bridge id 100: backbone |
| OCT sle2ErpsProfileControlName | 1.3.6.1.4.1.6296.101.4.18.2.2.7 | OCTET STRING | read-write | Profile name (maximum 32 characters). |
| INT sle2ErpsProfileControlHoldOffTime | 1.3.6.1.4.1.6296.101.4.18.2.2.8 | INTEGER | read-write | Indicates the hold-off time default : 0 |
| I32 sle2ErpsProfileControlGuardTime | 1.3.6.1.4.1.6296.101.4.18.2.2.9 | Integer32 | read-write | Indicates the guard time default : 500 |
| I32 sle2ErpsProfileControlWaitToRestore | 1.3.6.1.4.1.6296.101.4.18.2.2.10 | Integer32 | read-write | Indicates the wait-to-restore time default : 5 |
| INT sle2ErpsProfileControlNonRevertive | 1.3.6.1.4.1.6296.101.4.18.2.2.11 | INTEGER | read-write | The Non-Revertive or Revertive. |
| sle2ErpsProfileNotification | 1.3.6.1.4.1.6296.101.4.18.2.3 | |||
| NTF sle2ErpsProfileCreated | 1.3.6.1.4.1.6296.101.4.18.2.3.1 | createErpsProfile | ||
| NTF sle2ErpsProfileDestoryed | 1.3.6.1.4.1.6296.101.4.18.2.3.2 | destoryPhyRing | ||
| NTF sle2ErpsProfileTimerChanged | 1.3.6.1.4.1.6296.101.4.18.2.3.3 | setProfileTimer | ||
| NTF sle2ErpsProfileNoneRevertiveChanged | 1.3.6.1.4.1.6296.101.4.18.2.3.4 | setNoneRevertive | ||
| sle2ErpsInstance | 1.3.6.1.4.1.6296.101.4.18.3 | |||
| sle2ErpsInstanceTable | 1.3.6.1.4.1.6296.101.4.18.3.1 | not-accessible | Description. | |
| sle2ErpsInstanceEntry | 1.3.6.1.4.1.6296.101.4.18.3.1.1 | not-accessible | Description. | |
| I32 sle2ErpsInstBridgeId | 1.3.6.1.4.1.6296.101.4.18.3.1.1.1 | Integer32 | read-only | Indicates primary bridgegroup id 1: default bridge id 100: backbone |
| OCT sle2ErpsInstName | 1.3.6.1.4.1.6296.101.4.18.3.1.1.2 | OCTET STRING | read-only | The ERPS instance name. |
| OCT sle2ErpsInstPhyRingName | 1.3.6.1.4.1.6296.101.4.18.3.1.1.3 | OCTET STRING | read-only | Physical ring name (maximum 37 characters). Indicates the sle2ErpsPhyRingName of sle2ErpsPhyRing table |
| OCT sle2ErpsInstProfileName | 1.3.6.1.4.1.6296.101.4.18.3.1.1.4 | OCTET STRING | read-only | Profile name (maximum 32 characters). Indicates the sle2ErpsProfileName of sle2ErpsProfile Table. |
| I32 sle2ErpsInstRingId | 1.3.6.1.4.1.6296.101.4.18.3.1.1.5 | Integer32 | read-only | Indicates the Rings ID |
| I32 sle2ErpsInstLevel | 1.3.6.1.4.1.6296.101.4.18.3.1.1.6 | Integer32 | read-only | Indicates the Rings Level |
| INT sle2ErpsInstRplRole | 1.3.6.1.4.1.6296.101.4.18.3.1.1.7 | INTEGER | read-only | Indicates the Ring Nodes Role |
| INT sle2ErpsInstRplRolePort | 1.3.6.1.4.1.6296.101.4.18.3.1.1.8 | INTEGER | read-only | Indicates the Rings RPL port |
| INT sle2ErpsInstSubRingBlock | 1.3.6.1.4.1.6296.101.4.18.3.1.1.9 | INTEGER | read-only | Indicates the Sub-Rings RPL port. Indicates the Rings interconnection port. You should only give this command on interconnection nodes. |
| I32 sle2ErpsInstCtrlVlan | 1.3.6.1.4.1.6296.101.4.18.3.1.1.10 | Integer32 | read-only | Indicates the Ring Nodes control-vlan |
| OCT sle2ErpsInstTafficVlans | 1.3.6.1.4.1.6296.101.4.18.3.1.1.11 | OCTET STRING | read-only | Indicates the Ring Nodes traffic-vlans |
| INT sle2ErpsInstChannelMode | 1.3.6.1.4.1.6296.101.4.18.3.1.1.12 | INTEGER | read-only | Description. |
| I32 sle2ErpsInstVChannelVid | 1.3.6.1.4.1.6296.101.4.18.3.1.1.13 | Integer32 | read-only | VLAN identifier |
| OCT sle2ErpsInstVChannelAttachInstName | 1.3.6.1.4.1.6296.101.4.18.3.1.1.14 | OCTET STRING | read-only | Major instance name. |
| INT sle2ErpsInstPropagateTc | 1.3.6.1.4.1.6296.101.4.18.3.1.1.15 | INTEGER | read-only | Description. |
| INT sle2ErpsInstActive | 1.3.6.1.4.1.6296.101.4.18.3.1.1.16 | INTEGER | read-only | Description. |
| INT sle2ErpsInstStatus | 1.3.6.1.4.1.6296.101.4.18.3.1.1.17 | INTEGER | read-only | Indicates the erps instance status. |
| I32 sle2ErpsInstEastIfindex | 1.3.6.1.4.1.6296.101.4.18.3.1.1.18 | Integer32 | read-only | Description. |
| INT sle2ErpsInstEastPortStatus | 1.3.6.1.4.1.6296.101.4.18.3.1.1.19 | INTEGER | read-only | Indicates the east interface status. |
| I32 sle2ErpsInstWestIfindex | 1.3.6.1.4.1.6296.101.4.18.3.1.1.20 | Integer32 | read-only | Description. |
| INT sle2ErpsInstWestPortStatus | 1.3.6.1.4.1.6296.101.4.18.3.1.1.21 | INTEGER | read-only | Indicates the west interface status. |
| INT sle2ErpsInstVersion | 1.3.6.1.4.1.6296.101.4.18.3.1.1.22 | INTEGER | read-only | Indicates the west interface erps version. Version 1: ITU-T Recommendation G.8032/Y.1344 2008 Version 2: ITU-T Recommendation G.8032/Y.1344 2008 |
| OCT sle2ErpsInstDataTrafficInheritanceInstName | 1.3.6.1.4.1.6296.101.4.18.3.1.1.23 | OCTET STRING | read-only | The inheritance ERPS instance name. (temporary) |
| sle2ErpsInstanceControl | 1.3.6.1.4.1.6296.101.4.18.3.2 | |||
| INT sle2ErpsInstControlRequest | 1.3.6.1.4.1.6296.101.4.18.3.2.1 | INTEGER | read-write | Description. |
| I32 sle2ErpsInstControlStatus | 1.3.6.1.4.1.6296.101.4.18.3.2.2 | Integer32 | read-write | Description. |
| I32 sle2ErpsInstControlTimer | 1.3.6.1.4.1.6296.101.4.18.3.2.3 | Integer32 | read-write | Description. |
| I32 sle2ErpsInstControlTimeStamp | 1.3.6.1.4.1.6296.101.4.18.3.2.4 | Integer32 | read-write | Description. |
| I32 sle2ErpsInstControlReqResult | 1.3.6.1.4.1.6296.101.4.18.3.2.5 | Integer32 | read-write | Description. |
| I32 sle2ErpsInstControlBridgeId | 1.3.6.1.4.1.6296.101.4.18.3.2.6 | Integer32 | read-write | Indicates primary bridgegroup id 1: default bridge id 100: backbone |
| OCT sle2ErpsInstControlName | 1.3.6.1.4.1.6296.101.4.18.3.2.7 | OCTET STRING | read-write | The ERPS instance name. |
| OCT sle2ErpsInstControlPhyRingName | 1.3.6.1.4.1.6296.101.4.18.3.2.8 | OCTET STRING | read-write | Physical ring name (maximum 37 characters). Indicates the sle2ErpsPhyRingName of sle2ErpsPhyRing table |
| OCT sle2ErpsInstControlProfileName | 1.3.6.1.4.1.6296.101.4.18.3.2.9 | OCTET STRING | read-write | Profile name (maximum 32 characters). Indicates the sle2ErpsProfileName of sle2ErpsProfile Table. |
| I32 sle2ErpsInstControlRingId | 1.3.6.1.4.1.6296.101.4.18.3.2.10 | Integer32 | read-write | Indicates the Rings ID |
| I32 sle2ErpsInstControlLevel | 1.3.6.1.4.1.6296.101.4.18.3.2.11 | Integer32 | read-write | Indicates the Rings Level |
| INT sle2ErpsInstControlRplRole | 1.3.6.1.4.1.6296.101.4.18.3.2.12 | INTEGER | read-write | Indicates the Ring Nodes Role |
| INT sle2ErpsInstControlRplRolePort | 1.3.6.1.4.1.6296.101.4.18.3.2.13 | INTEGER | read-write | Indicates the Rings RPL port |
| INT sle2ErpsInstControlSubRingBlock | 1.3.6.1.4.1.6296.101.4.18.3.2.14 | INTEGER | read-write | Indicates the Sub-Rings RPL port. Indicates the Rings interconnection port. You should only give this command on interconnection nodes. |
| I32 sle2ErpsInstControlCtrlVlan | 1.3.6.1.4.1.6296.101.4.18.3.2.15 | Integer32 | read-write | Indicates the Ring Nodes control-vlan |
| I32 sle2ErpsInstControlTafficVlans | 1.3.6.1.4.1.6296.101.4.18.3.2.16 | Integer32 | read-write | Indicates the Ring Node traffic-vlans |
| I32 sle2ErpsInstControlVChannelVid | 1.3.6.1.4.1.6296.101.4.18.3.2.17 | Integer32 | read-write | VLAN identifier |
| OCT sle2ErpsInstControlVChannelAttachInstName | 1.3.6.1.4.1.6296.101.4.18.3.2.18 | OCTET STRING | read-write | Major instance name. |
| INT sle2ErpsInstControlForcedSwitch | 1.3.6.1.4.1.6296.101.4.18.3.2.19 | INTEGER | read-write | Indicates the Forced Switch |
| INT sle2ErpsInstControlManualSwitch | 1.3.6.1.4.1.6296.101.4.18.3.2.20 | INTEGER | read-write | Indicates the Manual Switch |
| INT sle2ErpsInstControlPropagateTc | 1.3.6.1.4.1.6296.101.4.18.3.2.21 | INTEGER | read-write | Description. |
| INT sle2ErpsInstControlVersion | 1.3.6.1.4.1.6296.101.4.18.3.2.22 | INTEGER | read-write | Indicates the version. Version 0: ITU-T Recommendation G.8032/Y.1344 2008 Version 1: ITU-T Recommendation G.8032/Y.1344 2008 |
| INT sle2ErpsInstControlActive | 1.3.6.1.4.1.6296.101.4.18.3.2.23 | INTEGER | read-write | Description. |
| OCT sle2ErpsInstControlDataTrafficInheritanceInstName | 1.3.6.1.4.1.6296.101.4.18.3.2.24 | OCTET STRING | read-write | The inheritance ERPS instance name. (temporary) |
| sle2ErpsInstanceNotification | 1.3.6.1.4.1.6296.101.4.18.3.3 | |||
| NTF sle2ErpsInstCreated | 1.3.6.1.4.1.6296.101.4.18.3.3.1 | createErpsInstance | ||
| NTF sle2ErpsInstDestoryed | 1.3.6.1.4.1.6296.101.4.18.3.3.2 | destoryErpsInstance | ||
| NTF sle2ErpsInstPhyRingAdded | 1.3.6.1.4.1.6296.101.4.18.3.3.3 | setErpsPhyRing | ||
| NTF sle2ErpsInstPhyRingDeleted | 1.3.6.1.4.1.6296.101.4.18.3.3.4 | Description. | ||
| NTF sle2ErpsInstProfileAdded | 1.3.6.1.4.1.6296.101.4.18.3.3.5 | setErpsProfile | ||
| NTF sle2ErpsInstProfileDeleted | 1.3.6.1.4.1.6296.101.4.18.3.3.6 | Description. | ||
| NTF sle2ErpsInstRingIdChanged | 1.3.6.1.4.1.6296.101.4.18.3.3.7 | setErpsInstRingId | ||
| NTF sle2ErpsInstLevelChanged | 1.3.6.1.4.1.6296.101.4.18.3.3.8 | setErpsInstLevel | ||
| NTF sle2ErpsInstRplRoleChanged | 1.3.6.1.4.1.6296.101.4.18.3.3.9 | setErpsInstRpl | ||
| NTF sle2ErpsInstSubRingAdded | 1.3.6.1.4.1.6296.101.4.18.3.3.10 | addErpsInstRubRing | ||
| NTF sle2ErpsInstSubRingDeleted | 1.3.6.1.4.1.6296.101.4.18.3.3.11 | delErpsInstRubRing | ||
| NTF sle2ErpsInstCtrlVlanAdded | 1.3.6.1.4.1.6296.101.4.18.3.3.12 | addErpsInstCtrlVlan | ||
| NTF sle2ErpsInstCtrlVlanDeleted | 1.3.6.1.4.1.6296.101.4.18.3.3.13 | delErpsInstCtrlVlan | ||
| NTF sle2ErpsInstDataTrafficVlanAdded | 1.3.6.1.4.1.6296.101.4.18.3.3.14 | addErpsInstTrafficVlan | ||
| NTF sle2ErpsInstDataTrafficVlanDeleted | 1.3.6.1.4.1.6296.101.4.18.3.3.15 | delErpsInstTrafficVlan | ||
| NTF sle2ErpsInstVitrualChannelAdded | 1.3.6.1.4.1.6296.101.4.18.3.3.16 | setErpsInstVitrualChannel | ||
| NTF sle2ErpsInstVitrualChannelDeleted | 1.3.6.1.4.1.6296.101.4.18.3.3.17 | Description. | ||
| NTF sle2ErpsInstNoneVirtualChannelAdded | 1.3.6.1.4.1.6296.101.4.18.3.3.18 | setErpsInstNoneVirtualChanel | ||
| NTF sle2ErpsInstNoneVirtualChannelDeleted | 1.3.6.1.4.1.6296.101.4.18.3.3.19 | Description. | ||
| NTF sle2ErpsInstForcedSwichChanged | 1.3.6.1.4.1.6296.101.4.18.3.3.20 | setErpsInstForcedSwitch | ||
| NTF sle2ErpsInstManualSwichChanged | 1.3.6.1.4.1.6296.101.4.18.3.3.21 | setErpsInstManualSwitch | ||
| NTF sle2ErpsInstClearChanged | 1.3.6.1.4.1.6296.101.4.18.3.3.22 | setErpsInstClear | ||
| NTF sle2ErpsInstPropagateTcChanged | 1.3.6.1.4.1.6296.101.4.18.3.3.23 | setErpsInstPropagateTc | ||
| NTF sle2ErpInstVersionChanged | 1.3.6.1.4.1.6296.101.4.18.3.3.24 | setErpsInstVersion | ||
| NTF sle2ErpInstActiveChanged | 1.3.6.1.4.1.6296.101.4.18.3.3.25 | Description. | ||
| NTF sle2ErpInstDataTrafficInheritanceInstNameChanged | 1.3.6.1.4.1.6296.101.4.18.3.3.26 | Temp | ||
| NTF sle2ErpInstDataTrafficInheritanceInstNameDeleted | 1.3.6.1.4.1.6296.101.4.18.3.3.27 | Temp | ||
| sleFaultMgmtGroup | 1.3.6.1.4.1.6296.101.4.19 | Description. | ||
| sleFaultMgmtNotificationGroup | 1.3.6.1.4.1.6296.101.4.20 | Description. |
RFC description
MIB module representing multiple logical entities for SLE alarm management.
Start monitoring DASAN Networks SLE-series access equipment (alarm severity configuration/status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.