BENU-WAG-STATS-MIB

All MIBs › BENU-WAG-STATS-MIB

Organization: Benu Networks,Inc

Last Updated: 2017-02-02

Category: Quality of Service, Vendor: Benu Networks

Description: Monitors Wireless Access Gateway (WAG) session counts and throughput statistics on Benu Networks platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BENU-WAG-STATS-MIB?

BENU-WAG-STATS-MIB is a Benu Networks, Inc. proprietary MIB reporting RADIUS transaction statistics for the Benu Wireless Access Gateway (WAG). Its RADIUS table, keyed by statistics interval, records interval duration, auth/accounting latency min/max/average/last, access-request-sent/accept-received/reject-received counts, accounting request-sent/response-received counts, CoA (Change of Authorization) ack/nack-sent and request-received counts with latency stats, and Disconnect-Message (DM) latency stats. As a performance MIB it lets an administrator watch RADIUS authentication/accounting latency trends on a Benu WAG. It is deployed on Benu Networks Wireless Access Gateway platforms. Engineers can download the BENU-WAG-STATS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BENU-WAG-STATS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Benu Networks Wireless Access Gateway platforms

Monitoring Examples

An administrator monitors bWagRadiusAuthLatencyAvg to catch RADIUS authentication slowdowns on a Benu Wireless Access Gateway.

What Can Be Monitored

RADIUS authentication/accounting/CoA latency statistics

Imported Objects

From BENU-WAG-MIB

benuWAG

MODULE-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress

How to Use in IPNetwork Monitor

Example using bWagNumTunnelsCreatedDynamically OID:

Select a Benu Networks (Ciena) broadband/WiFi Access Gateway (WAG) platform as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type bWagNumTunnelsCreatedDynamically into the Find box to locate it in the OID tree, then select it and click OK. The total number of dynamically established GRE tunnels. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
U32 bDSLitePortBlocksInUse	1.3.6.1.4.1.39406.2.1.3.16.3	Unsigned32	read-only	The total number of DS-Lite port blocks in use.
U32 bDSLitePortBlocksTotal	1.3.6.1.4.1.39406.2.1.3.16.2	Unsigned32	read-only	The total number of DS-Lite port blocks.
U32 bDSLiteTunnelsUsingFivePortBlocks	1.3.6.1.4.1.39406.2.1.3.16.8	Unsigned32	read-only	The total number of tunnels using five port blocks in DS-Lite.
U32 bDSLiteTunnelsUsingFourPortBlocks	1.3.6.1.4.1.39406.2.1.3.16.7	Unsigned32	read-only	The total number of tunnels using four port blocks in DS-Lite.
U32 bDSLiteTunnelsUsingOnePortBlock	1.3.6.1.4.1.39406.2.1.3.16.4	Unsigned32	read-only	The total number of tunnels using one port block in DS-Lite.
U32 bDSLiteTunnelsUsingThreePortBlocks	1.3.6.1.4.1.39406.2.1.3.16.6	Unsigned32	read-only	The total number of tunnels using three port blocks in DS-Lite.
U32 bDSLiteTunnelsUsingTwoPortBlocks	1.3.6.1.4.1.39406.2.1.3.16.5	Unsigned32	read-only	The total number of tunnels using two port blocks in DS-Lite.
benuWagStatsMIB	1.3.6.1.4.1.39406.2.1.3			This MIB module defines statistics of Benu Wireless Access Gateway. Copyright (C) 2012 by Benu Networks, Inc. All rights reserved.
NTF bWagCgnatAuthIpAddressesExhausted	1.3.6.1.4.1.39406.2.1.3.0.3			This notification signifies that the current number of used authenticated CGNAT IP addresses are exhausted from pool group
NTF bWagCgnatAuthIpAddrHighThresholdReached	1.3.6.1.4.1.39406.2.1.3.0.1			This notification signifies that the current number of used authenticated CGNAT IP addresses has risen above the value of bWagCgnatAuthIpAddrUsedHighThreshold.
NTF bWagCgnatAuthIpAddrLowThresholdReached	1.3.6.1.4.1.39406.2.1.3.0.2			This notification signifies that the current number of used authenticated CGNAT IP addresses has fallen below the value of bWagCgnatAuthIpAddrUsedLowThreshold.
U32 bWagCgnatAuthIpAddrUsedHighThreshold	1.3.6.1.4.1.39406.2.1.3.10.3	Unsigned32	accessible-for-notify	The high threshold for the number of used authenticated CGNAT IP addresses. If the number of used IP addresses exceeds this value, a bWagCgnatAuthIpAddrHighThresholdReached event will be generated. No more bWagCgnatAuthIpAddrHighThresholdReached events will be generated until the value of the number of used authenticated CGNAT IP addresses becomes equal to or less than the value of bWagCgnatAuthIpAddrUsedLowThreshold.
U32 bWagCgnatAuthIpAddrUsedLowThreshold	1.3.6.1.4.1.39406.2.1.3.10.4	Unsigned32	accessible-for-notify	The low threshold for the number of used authenticated CGNAT IP addresses. If a bWagCgnatAuthIpAddrHighThresholdReached event had previously been generated, and if the number of used IP addresses equals to or falls below this value, a bWagCgnatAuthIpAddrLowThresholdReached event will be generated. No more bWagCgnatAuthIpAddrLowThresholdReached events will be generated until the value of the number of used authenticated CGNAT IP addresses exceeds bWagCgnatAuthIpAddrUsedHighThreshold and a bWagCgnatAuthIpAddrHighThresholdReached is first generated.
U32 bWagCgnatAuthPortRisingThresholdCrossedSubCount	1.3.6.1.4.1.39406.2.1.3.9.7	Unsigned32	read-only	The count of the total number of authenticated CGNAT subscribers whose port usage is above the configured rising threshold. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
bWagCgnatAuthPortUtilEntry	1.3.6.1.4.1.39406.2.1.3.9.6.1		not-accessible	A logical row in the bWagCgnatAuthPortUtilTable.
bWagCgnatAuthPortUtilTable	1.3.6.1.4.1.39406.2.1.3.9.6		not-accessible	A list of CGNAT statistics for each authenticated subscriber that has crossed port utilization threshold. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
MAC bWagCgnatAuthSubscriberMac	1.3.6.1.4.1.39406.2.1.3.9.6.1.1	MacAddress	not-accessible	The MAC address of the authenticated CGNAT subscriber for which the current ports in use has crossed the configured high water mark.
U32 bWagCgnatAuthSubscriberPortsUtil	1.3.6.1.4.1.39406.2.1.3.9.6.1.2	Unsigned32	read-only	Number of ports in use by the authenticated CGNAT subscriber. This does not include the number that can be reclaimed. The value of this object is calculated based on the reclaim time, the ports allocated, and the ports that can be reclaimed at the time of request.
U32 bWagCgnatIntervalDuration	1.3.6.1.4.1.39406.2.1.3.9.3.1.8	Unsigned32	read-only	Duration of statistics interval in minutes.
IP bWagCgnatIPAddress	1.3.6.1.4.1.39406.2.1.3.9.3.1.4	InetAddress	read-only	Public IP address assigned to authenticated CGNAT subscribers including the reserved IP address.
IPt bWagCgnatIPAddressType	1.3.6.1.4.1.39406.2.1.3.9.3.1.3	InetAddressType	read-only	IP Address type (IPv4 or IPv6).
U32 bWagCgnatIPPacketsDropped	1.3.6.1.4.1.39406.2.1.3.9.2.1.8	Unsigned32	read-only	Number of packets dropped due to port exhaustion for this public IP address. This value represents the sum of dropped packets for all authenticated CGNAT subscribers for whom NAT was applied with this public IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
U32 bWagCgnatIPPortBlocksFree	1.3.6.1.4.1.39406.2.1.3.9.2.1.5	Unsigned32	read-only	Number of port blocks for use by authenticated CGNAT subscribers with this public IP address.
U32 bWagCgnatIPPortBlocksReused	1.3.6.1.4.1.39406.2.1.3.9.2.1.6	Unsigned32	read-only	Number of port blocks reused by authenticated CGNAT subscribers with this public IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
U32 bWagCgnatIPPortBlocksUsed	1.3.6.1.4.1.39406.2.1.3.9.2.1.4	Unsigned32	read-only	Number of port blocks in use by authenticated CGNAT subscribers with this public IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
bWagCgnatIPStatsEntry	1.3.6.1.4.1.39406.2.1.3.9.2.1		not-accessible	A logical row in the bWagCgnatIPStatsTable.
I32 bWagCgnatIPStatsIndex	1.3.6.1.4.1.39406.2.1.3.9.2.1.1	Integer32	not-accessible	A number uniquely identifying this row in the authenticated CGNAT IP statistics table.
bWagCgnatIPStatsTable	1.3.6.1.4.1.39406.2.1.3.9.2		not-accessible	A list of statistics per authenticated CGNAT IP address.
U32 bWagCgnatIPSubActiveCount	1.3.6.1.4.1.39406.2.1.3.9.2.1.7	Unsigned32	read-only	Number of authenticated CGNAT subscribers currently active with this public IP address.
bWagCgnatMIBObjects	1.3.6.1.4.1.39406.2.1.3.9			WAG CGNAT objects are defined in this branch.
bWagCgnatNotifObjects	1.3.6.1.4.1.39406.2.1.3.10			Notifications of WAG CGNAT are defined in this branch.
U32 bWagCgnatPacketsDropped	1.3.6.1.4.1.39406.2.1.3.9.3.1.5	Unsigned32	read-only	Number of packets dropped due to port exhaustion for this public IP address in this interval. This value represents the sum of dropped packets for all authenticated CGNAT subscribers for whom NAT was applied with this public IP address in this interval.
bWagCgnatPeriodIpEntry	1.3.6.1.4.1.39406.2.1.3.9.3.1		not-accessible	A logical row in the bWagCgnatPeriodIpTable.
I32 bWagCgnatPeriodIpIndex	1.3.6.1.4.1.39406.2.1.3.9.3.1.2	Integer32	not-accessible	A number uniquely identifying the authenticated CGNAT public IP address.
I32 bWagCgnatPeriodIpInterval	1.3.6.1.4.1.39406.2.1.3.9.3.1.1	Integer32	not-accessible	The interval for acculating the measurements. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data, greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
bWagCgnatPeriodIpTable	1.3.6.1.4.1.39406.2.1.3.9.3		not-accessible	A list of periodic statistics per authenticated CGNAT public IP address including the reserved IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
U32 bWagCgnatPoolGroupIndex	1.3.6.1.4.1.39406.2.1.3.9.8.1.2	Unsigned32	not-accessible	Index of the IP Pool group entry in the table.
STR bWagCgnatPoolGroupName	1.3.6.1.4.1.39406.2.1.3.9.8.1.3	DisplayString	read-only	The name of this pool group.
U32 bWagCgnatPoolGroupReservedIPAddresses	1.3.6.1.4.1.39406.2.1.3.9.8.1.6	Unsigned32	read-only	Number of IP addresses reserved from this pool group.
bWagCgnatPoolGroupStatsEntry	1.3.6.1.4.1.39406.2.1.3.9.8.1		not-accessible	A logical row in the bWagCgnatPoolGroupTable.
bWagCgnatPoolGroupStatsTable	1.3.6.1.4.1.39406.2.1.3.9.8		not-accessible	A list of CGNAT statistics for pool group.
U32 bWagCgnatPoolGroupSubscribers	1.3.6.1.4.1.39406.2.1.3.9.8.1.4	Unsigned32	read-only	Number of subscribers currently active with an IP address belonging to this pool group.
U32 bWagCgnatPoolGroupTotalIPAddresses	1.3.6.1.4.1.39406.2.1.3.9.8.1.7	Unsigned32	read-only	Total number of IP addresses available in this pool group.
INT bWagCgnatPoolGroupType	1.3.6.1.4.1.39406.2.1.3.9.8.1.1	INTEGER	not-accessible	The type of the CGNAT profile (AuthNapt/UnAuthNapt) that this pool group belongs to.
U32 bWagCgnatPoolGroupUsedIPAddresses	1.3.6.1.4.1.39406.2.1.3.9.8.1.5	Unsigned32	read-only	Number of IP addresses in use from this pool group.
U32 bWagCgnatPortBlockMaxUtil	1.3.6.1.4.1.39406.2.1.3.9.3.1.6	Unsigned32	read-only	The maximum number of port blocks that were allocated to authenticated CGNAT subscribers at any given time during the collection interval is recorded. The ratio of this value to the total number of non-reserved port blocks allocated for this public IP address is calculated and reported as percentage in this object. Units: Percentage in the range 0 - 100.
U32 bWagCgnatPortBlockMinUtil	1.3.6.1.4.1.39406.2.1.3.9.3.1.7	Unsigned32	read-only	The minimum number of port blocks that were allocated to authenticated CGNAT subscribers at any given time during the collection interval is recorded. The ratio of this value to the total number of non-reserved port blocks allocated for this public IP address is calculated and reported as percentage in this object. Units: Percentage in the range 0 - 100.
U32 bWagCgnatPortBlocksUsedHighThreshold	1.3.6.1.4.1.39406.2.1.3.10.7	Unsigned32	accessible-for-notify	The high threshold for the number of used CGNAT port blocks by authenticated subscribers. If the number of used port blocks exceeds this value, a bWagCgnatPortBlocksUsedHighThresholdReached event will be generated. No more bWagCgnatPortBlocksUsedHighThresholdReached events will be generated until the value of the number of used CGNAT port blocks becomes equal to or less than the value of bWagCgnatPortBlocksUsedLowThreshold. The ratio of this value to the total number of port blocks is reported as percentage in this object. Units: Percentage in the range 0 - 100.
NTF bWagCgnatPortBlocksUsedHighThresholdReached	1.3.6.1.4.1.39406.2.1.3.0.4			This notification signifies that the current number of used CGNAT port blocks used for an authenticated subscriber has risen above the value of bWagCgnatPortBlocksUsedHighThreshold.
U32 bWagCgnatPortBlocksUsedLowThreshold	1.3.6.1.4.1.39406.2.1.3.10.8	Unsigned32	accessible-for-notify	The low threshold for the number of used CGNAT port blocks by authenticated subscribers. If a bWagCgnatPortBlocksUsedHighThresholdReached event had previously been generated, and if the number of used port blocks equals to or falls below this value, a bWagCgnatPortBlocksUsedLowThresholdReached event will be generated. No more bWagCgnatPortBlocksUsedLowThreshold events will be generated until the value of the number of used CGNAT Port blocks exceeds bWagCgnatPortBlocksUsedHighThresholdReached and a bWagCgnatPortBlocksUsedHighThresholdReached is first generated. The ratio of this value to the total number of port blocks is reported as percentage in this object. Units: Percentage in the range 0 - 100.
NTF bWagCgnatPortBlocksUsedLowThresholdReached	1.3.6.1.4.1.39406.2.1.3.0.5			This notification signifies that the current number of used CGNAT Port blocks for an authenticated subscriber has fallen below the value of bWagCgnatPortBlocksUsedLowThreshold.
STR bWagCgnatProfileIPPoolGroup	1.3.6.1.4.1.39406.2.1.3.10.1	DisplayString	accessible-for-notify	IP Pool group name associated with this profile.
U32 bWagCgnatProfileMaxIPAddresses	1.3.6.1.4.1.39406.2.1.3.9.1.1.6	Unsigned32	read-only	The maximum number of public IP addresses required to fully service the configured max-subscribers for the profile. This is calculated based on three other configuration parameters: block-size, number of port blocks, and the port range, as shown below: 1. Port Range = (Upper bound - Lower bound of port numbers) + 1 2. Number of subscribers per IP = Port Range/(block-size * blocks) 3. Max IP Addresses = ceiling(max-subscribers/Number of subscribers per IP).
STR bWagCgnatProfileName	1.3.6.1.4.1.39406.2.1.3.9.1.1.2	DisplayString	read-only	The name of the CGNAT profile.
STR bWagCgnatProfileNATIPPoolGroup	1.3.6.1.4.1.39406.2.1.3.9.1.1.4	DisplayString	read-only	IP Pool group name associated with this profile.
U32 bWagCgnatProfilePortBlocksReused	1.3.6.1.4.1.39406.2.1.3.9.1.1.11	Unsigned32	read-only	Number of port blocks reused in this profile. This value will always be reported as zero for an unauthenticated CGNAT profile.
U32 bWagCgnatProfilePortBlocksUsed	1.3.6.1.4.1.39406.2.1.3.9.1.1.10	Unsigned32	read-only	Number of port blocks in use in this profile.
U32 bWagCgnatProfileReservedIPAddresses	1.3.6.1.4.1.39406.2.1.3.9.1.1.8	Unsigned32	read-only	Number of IP addresses reserved in this profile.
bWagCgnatProfileStatsEntry	1.3.6.1.4.1.39406.2.1.3.9.1.1		not-accessible	A logical row in the bWagCgnatProfileTable.
I32 bWagCgnatProfileStatsIndex	1.3.6.1.4.1.39406.2.1.3.9.1.1.1	Integer32	not-accessible	A number uniquely identifying this CGNAT profile.
bWagCgnatProfileStatsTable	1.3.6.1.4.1.39406.2.1.3.9.1		not-accessible	A list of CGNAT statistics for profiles.
U32 bWagCgnatProfileSubscribers	1.3.6.1.4.1.39406.2.1.3.9.1.1.5	Unsigned32	read-only	Number of authenticated subscribers currently active in this profile.
U32 bWagCgnatProfileTotalPoolIPAddresses	1.3.6.1.4.1.39406.2.1.3.9.1.1.12	Unsigned32	read-only	Total number of IP addresses available in the pool.
U32 bWagCgnatProfileTotalPortBlocks	1.3.6.1.4.1.39406.2.1.3.9.1.1.9	Unsigned32	read-only	Number of total port blocks in this profile. This is equivalent to (max-subscribers * block-size) in this profile.
STR bWagCgnatProfileType	1.3.6.1.4.1.39406.2.1.3.9.1.1.3	DisplayString	read-only	The type of the CGNAT profile (AuthNapt/UnAuthNapt).
U32 bWagCgnatProfileUsedIPAddresses	1.3.6.1.4.1.39406.2.1.3.9.1.1.7	Unsigned32	read-only	Number of IP addresses in use in this profile.
IP bWagCgnatPublicIPAddress	1.3.6.1.4.1.39406.2.1.3.9.2.1.3	InetAddress	read-only	Public IP address assigned to authenticated CGNAT subscribers.
IPt bWagCgnatPublicIPAddressType	1.3.6.1.4.1.39406.2.1.3.9.2.1.2	InetAddressType	read-only	IP Address type (IPv4 or IPv6).
MAC bWagCgnatSubscriberMac	1.3.6.1.4.1.39406.2.1.3.10.5	MacAddress	accessible-for-notify	MAC address of the subscriber.
U32 bWagCgnatTotalPoolIPAddresses	1.3.6.1.4.1.39406.2.1.3.10.2	Unsigned32	accessible-for-notify	The total number of IP addresses available in the pool.
U32 bWagCgnatTotalPortBlocksPerSubscriber	1.3.6.1.4.1.39406.2.1.3.10.6	Unsigned32	accessible-for-notify	Number of port blocks available for the authenticated CGNAT subscriber.
U32 bWagCgnatUnauthIntervalDuration	1.3.6.1.4.1.39406.2.1.3.9.5.1.7	Unsigned32	read-only	Duration of statistics interval in minutes.
IP bWagCgnatUnauthIPAddress	1.3.6.1.4.1.39406.2.1.3.9.5.1.4	InetAddress	read-only	Public IP address assigned to unauthenticated CGNAT subscribers including the reserved IP address.
IPt bWagCgnatUnauthIPAddressType	1.3.6.1.4.1.39406.2.1.3.9.5.1.3	InetAddressType	read-only	IP Address type (IPv4 or IPv6).
U32 bWagCgnatUnauthIPPortBlocksFree	1.3.6.1.4.1.39406.2.1.3.9.4.1.5	Unsigned32	read-only	Number of port blocks for use by unauthenticated CGNAT subscribers with this public IP address.
U32 bWagCgnatUnauthIPPortBlocksReused	1.3.6.1.4.1.39406.2.1.3.9.4.1.6	Unsigned32	read-only	Number of port blocks reused by unauthenticated CGNAT subscribers with this public IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
U32 bWagCgnatUnauthIPPortBlocksUsed	1.3.6.1.4.1.39406.2.1.3.9.4.1.4	Unsigned32	read-only	Number of port blocks in use by unauthenticated CGNAT subscribers with this public IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
bWagCgnatUnauthIPStatsEntry	1.3.6.1.4.1.39406.2.1.3.9.4.1		not-accessible	A logical row in the bWagCgnatUnauthIPStatsTable.
I32 bWagCgnatUnauthIPStatsIndex	1.3.6.1.4.1.39406.2.1.3.9.4.1.1	Integer32	not-accessible	A number uniquely identifying this row in the unauthenticated CGNAT IP statistics table.
bWagCgnatUnauthIPStatsTable	1.3.6.1.4.1.39406.2.1.3.9.4		not-accessible	A list of statistics per unauthenticated CGNAT IP address.
U32 bWagCgnatUnauthIPSubActiveCount	1.3.6.1.4.1.39406.2.1.3.9.4.1.7	Unsigned32	read-only	Number of unauthenticated CGNAT subscribers currently active with this public IP address.
bWagCgnatUnauthPeriodIpEntry	1.3.6.1.4.1.39406.2.1.3.9.5.1		not-accessible	A logical row in the bWagCgnatUnauthPeriodIpTable.
I32 bWagCgnatUnauthPeriodIpIndex	1.3.6.1.4.1.39406.2.1.3.9.5.1.2	Integer32	not-accessible	A number uniquely identifying the unauthenticated CGNAT public IP address.
I32 bWagCgnatUnauthPeriodIpInterval	1.3.6.1.4.1.39406.2.1.3.9.5.1.1	Integer32	not-accessible	The interval for acculating the measurements. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data, greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
bWagCgnatUnauthPeriodIpTable	1.3.6.1.4.1.39406.2.1.3.9.5		not-accessible	A list of periodic statistics per unauthenicated CGNAT public IP address including the reserved IP address. This is obsolete. benuCgnatStatsMIB provides current CGNAT IP address and port usage statistics.
U32 bWagCgnatUnauthPortBlockMaxUtil	1.3.6.1.4.1.39406.2.1.3.9.5.1.5	Unsigned32	read-only	The maximum number of port blocks that were allocated to unauthenticated CGNAT subscribers at any given time during the collection interval is recorded. The ratio of this value to the total number of port blocks available for this public IP address is calculated and reported as percentage in this object. Units: Percentage in the range 0 - 100.
U32 bWagCgnatUnauthPortBlockMinUtil	1.3.6.1.4.1.39406.2.1.3.9.5.1.6	Unsigned32	read-only	The minimum number of port blocks that were allocated to unauthenticated CGNAT subscribers at any given time during the collection interval is recorded. The ratio of this value to the total number of port blocks available for this public IP address is calculated and reported as percentage in this object. Units: Percentage in the range 0 - 100.
IP bWagCgnatUnauthPublicIPAddress	1.3.6.1.4.1.39406.2.1.3.9.4.1.3	InetAddress	read-only	Public IP address assigned to unauthenticated CGNAT subscribers.
IPt bWagCgnatUnauthPublicIPAddressType	1.3.6.1.4.1.39406.2.1.3.9.4.1.2	InetAddressType	read-only	IP Address type (IPv4 or IPv6).
U32 bWagDhcpAckSent	1.3.6.1.4.1.39406.2.1.3.3.1.1.18	Unsigned32	read-only	The count of the total number of DHCP Ack message(s) sent during the reporting period.
U32 bWagDhcpDiscoverAckIntervalAvg	1.3.6.1.4.1.39406.2.1.3.3.1.1.5	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Ack message(s) sent by the WAG. The value is in microseconds.
U32 bWagDhcpDiscoverAckIntervalLast	1.3.6.1.4.1.39406.2.1.3.3.1.1.6	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent DHCP Discover message received by the WAG and its corresponding DHCP Ack message sent by the WAG. The value is in microseconds.
U32 bWagDhcpDiscoverAckIntervalMax	1.3.6.1.4.1.39406.2.1.3.3.1.1.4	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Ack message(s) sent by the WAG. The value is in microseconds.
U32 bWagDhcpDiscoverAckIntervalMin	1.3.6.1.4.1.39406.2.1.3.3.1.1.3	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Ack message(s) sent by the WAG. The value is in microseconds.
U32 bWagDhcpDiscoverOfferLatencyAvg	1.3.6.1.4.1.39406.2.1.3.3.1.1.13	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Offer message(s) sent by the WAG. The value is in microseconds.
U32 bWagDhcpDiscoverOfferLatencyLast	1.3.6.1.4.1.39406.2.1.3.3.1.1.14	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent DHCP Discover message received by the WAG and its corresponding DHCP Offer message sent by the WAG. The value is in microseconds.
U32 bWagDhcpDiscoverOfferLatencyMax	1.3.6.1.4.1.39406.2.1.3.3.1.1.12	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Offer message(s) sent by the WAG. The value is in microseconds.
U32 bWagDhcpDiscoverOfferLatencyMin	1.3.6.1.4.1.39406.2.1.3.3.1.1.11	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all DHCP Discover message(s) received by the WAG and their corresponding DHCP Offer message(s) sent by the WAG. The value is in microseconds.
U32 bWagDhcpDiscoverReceived	1.3.6.1.4.1.39406.2.1.3.3.1.1.15	Unsigned32	read-only	The count of the total number of DHCP Discover message(s) received during the reporting period.
bWagDhcpEntry	1.3.6.1.4.1.39406.2.1.3.3.1.1		not-accessible	A logical row in the bWagDhcpTable.
I32 bWagDhcpIntervalDuration	1.3.6.1.4.1.39406.2.1.3.3.1.1.2	Integer32	read-only	Duration of stats interval in minutes
bWagDhcpMIBObjects	1.3.6.1.4.1.39406.2.1.3.3			WAG DHCP statistics are defined in this branch.
U32 bWagDhcpNackSent	1.3.6.1.4.1.39406.2.1.3.3.1.1.19	Unsigned32	read-only	The count of the total number of DHCP Nack message(s) sent during the reporting period.
bWagDhcpNotifObjects	1.3.6.1.4.1.39406.2.1.3.4			Notifications of WAG DHCP statistics are defined in this branch.
U32 bWagDhcpOfferRequestIntervalAvg	1.3.6.1.4.1.39406.2.1.3.3.1.1.22	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all DHCP Offer message(s) sent by the WAG and the corresponding DHCP Request message(s) received by the WAG. The value is in microseconds.
U32 bWagDhcpOfferRequestIntervalLast	1.3.6.1.4.1.39406.2.1.3.3.1.1.23	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent DHCP Offer message sent by the WAG and its corresponding DHCP Request message received by the WAG. The value is in microseconds.
U32 bWagDhcpOfferRequestIntervalMax	1.3.6.1.4.1.39406.2.1.3.3.1.1.21	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all DHCP Offer message(s) sent by the WAG and the corresponding DHCP Request message(s) received by the WAG. The value is in microseconds.
U32 bWagDhcpOfferRequestIntervalMin	1.3.6.1.4.1.39406.2.1.3.3.1.1.20	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all DHCP Offer message(s) sent by the WAG and the corresponding DHCP Request message(s) received by the WAG. The value is in microseconds.
U32 bWagDhcpOfferSent	1.3.6.1.4.1.39406.2.1.3.3.1.1.16	Unsigned32	read-only	The count of the total number of DHCP Offer message(s) sent during the reporting period.
U32 bWagDhcpRequestAckLatencyAvg	1.3.6.1.4.1.39406.2.1.3.3.1.1.9	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all DHCP Request message(s) received by the WAG and their corresponding DHCP Ack message(s) is sent by the WAG. The value is in microseconds.
U32 bWagDhcpRequestAckLatencyLast	1.3.6.1.4.1.39406.2.1.3.3.1.1.10	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent DHCP Request message received by the WAG and its corresponding DHCP Ack message sent by the WAG. The value is in microseconds.
U32 bWagDhcpRequestAckLatencyMax	1.3.6.1.4.1.39406.2.1.3.3.1.1.8	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all DHCP Request message(s) received by the WAG and their corresponding DHCP Ack message(s) sent by the WAG. The value is in microseconds.
U32 bWagDhcpRequestAckLatencyMin	1.3.6.1.4.1.39406.2.1.3.3.1.1.7	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all DHCP Request message(s) received by the WAG and their corresponding DHCP Ack message(s) sent by the WAG. The value is in microseconds.
U32 bWagDhcpRequestReceived	1.3.6.1.4.1.39406.2.1.3.3.1.1.17	Unsigned32	read-only	The count of the total number of DHCP Request message(s) received during the reporting period.
I32 bWagDhcpStatsInterval	1.3.6.1.4.1.39406.2.1.3.3.1.1.1	Integer32	not-accessible	The interval where the measurements were accumulated. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
bWagDhcpTable	1.3.6.1.4.1.39406.2.1.3.3.1		not-accessible	A list of DHCP periodic statistics.
U32 bWagDhcpTPS	1.3.6.1.4.1.39406.2.1.3.3.2.1.5	Unsigned32	read-only	Total number of DHCP transactions for the DHCP tps interval
bWagDhcpTPSEntry	1.3.6.1.4.1.39406.2.1.3.3.2.1		not-accessible	A logical row in the bWagDhcpTPSTable.
U32 bWagDhcpTPSHigh	1.3.6.1.4.1.39406.2.1.3.3.2.1.4	Unsigned32	read-only	The high value configured for the particular interval
NTF bWagDhcpTPSHighReached	1.3.6.1.4.1.39406.2.1.3.0.6			This notification signifies that the total number of DHCP transactions for the particular interval has risen above the value bWagDhcpTPSHigh.
I32 bWagDhcpTPSInterval	1.3.6.1.4.1.39406.2.1.3.3.2.1.1	Integer32	not-accessible	The interval where the measurements were accumulated. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
U32 bWagDhcpTPSIntervalDuration	1.3.6.1.4.1.39406.2.1.3.3.2.1.2	Unsigned32	read-only	Configured interval duration of DHCP transactions in seconds
U32 bWagDhcpTPSLow	1.3.6.1.4.1.39406.2.1.3.3.2.1.3	Unsigned32	read-only	The low value configured for the particular interval
NTF bWagDhcpTPSLowReached	1.3.6.1.4.1.39406.2.1.3.0.7			This notification signifies that the total number of DHCP transactions for the particular interval has fallen below the value bWagDhcpTPSLow.
bWagDhcpTPSTable	1.3.6.1.4.1.39406.2.1.3.3.2		not-accessible	A list of DHCP TPS periodic statistics.
U32 bWagDHCPv6AdvertisementSent	1.3.6.1.4.1.39406.2.1.3.13.1.1.20	Unsigned32	read-only	The count of the total number of DHCPv6 Advertisement message(s) sent during the reporting period.
U32 bWagDHCPv6AdvRequestIntervalAvg	1.3.6.1.4.1.39406.2.1.3.13.1.1.17	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all DHCPv6 Advertisement message(s) sent by the WAG and the corresponding DHCPv6 Request message(s) received by the WAG. The value is in microseconds.
U32 bWagDHCPv6AdvRequestIntervalLast	1.3.6.1.4.1.39406.2.1.3.13.1.1.18	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent DHCPv6 Advertisement message sent by the WAG and its corresponding DHCPv6 Request message received by the WAG. The value is in microseconds.
U32 bWagDHCPv6AdvRequestIntervalMax	1.3.6.1.4.1.39406.2.1.3.13.1.1.16	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all DHCPv6 Advertisement message(s) sent by the WAG and the corresponding DHCPv6 Request message(s) received by the WAG. The value is in microseconds.
U32 bWagDHCPv6AdvRequestIntervalMin	1.3.6.1.4.1.39406.2.1.3.13.1.1.15	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all DHCPv6 Advertisement message(s) sent by the WAG and the corresponding DHCPv6 Request message(s) received by the WAG. The value is in microseconds.
bWagDHCPv6Entry	1.3.6.1.4.1.39406.2.1.3.13.1.1		not-accessible	A logical row in the bWagDHCPv6Table.
I32 bWagDHCPv6IntervalDuration	1.3.6.1.4.1.39406.2.1.3.13.1.1.2	Integer32	read-only	Duration of stats interval in minutes
bWagDhcpv6MIBObjects	1.3.6.1.4.1.39406.2.1.3.13			WAG DHCPv6 statistics are defined in this branch.
U32 bWagDHCPv6ReplySent	1.3.6.1.4.1.39406.2.1.3.13.1.1.22	Unsigned32	read-only	The count of the total number of DHCPv6 Reply message(s) sent during the reporting period.
U32 bWagDHCPv6RequestReceived	1.3.6.1.4.1.39406.2.1.3.13.1.1.21	Unsigned32	read-only	The count of the total number of DHCPv6 Request message(s) received during the reporting period.
U32 bWagDHCPv6RequestReplyLatencyAvg	1.3.6.1.4.1.39406.2.1.3.13.1.1.9	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all DHCPv6 Request message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) is sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6RequestReplyLatencyLast	1.3.6.1.4.1.39406.2.1.3.13.1.1.10	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent DHCPv6 Request message received by the WAG and its corresponding DHCPv6 Reply message sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6RequestReplyLatencyMax	1.3.6.1.4.1.39406.2.1.3.13.1.1.8	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all DHCPv6 Request message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6RequestReplyLatencyMin	1.3.6.1.4.1.39406.2.1.3.13.1.1.7	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all DHCPv6 Request message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6SolicitAdvLatencyAvg	1.3.6.1.4.1.39406.2.1.3.13.1.1.13	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Advertisement message(s) sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6SolicitAdvLatencyLast	1.3.6.1.4.1.39406.2.1.3.13.1.1.14	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent DHCPv6 Solicit message received by the WAG and its corresponding DHCPv6 Advertisement message sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6SolicitAdvLatencyMax	1.3.6.1.4.1.39406.2.1.3.13.1.1.12	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Advertisement message(s) sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6SolicitAdvLatencyMin	1.3.6.1.4.1.39406.2.1.3.13.1.1.11	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Advertisement message(s) sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6SolicitReceived	1.3.6.1.4.1.39406.2.1.3.13.1.1.19	Unsigned32	read-only	The count of the total number of DHCPv6 Solicit message(s) received during the reporting period.
U32 bWagDHCPv6SolicitReplyIntervalAvg	1.3.6.1.4.1.39406.2.1.3.13.1.1.5	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6SolicitReplyIntervalLast	1.3.6.1.4.1.39406.2.1.3.13.1.1.6	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent DHCPv6 Solicit message received by the WAG and its corresponding DHCPv6 Reply message sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6SolicitReplyIntervalMax	1.3.6.1.4.1.39406.2.1.3.13.1.1.4	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) sent by the WAG. The value is in microseconds.
U32 bWagDHCPv6SolicitReplyIntervalMin	1.3.6.1.4.1.39406.2.1.3.13.1.1.3	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all DHCPv6 Solicit message(s) received by the WAG and their corresponding DHCPv6 Reply message(s) sent by the WAG. The value is in microseconds.
I32 bWagDHCPv6StatsInterval	1.3.6.1.4.1.39406.2.1.3.13.1.1.1	Integer32	not-accessible	The interval where the measurements were accumulated. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
bWagDHCPv6Table	1.3.6.1.4.1.39406.2.1.3.13.1		not-accessible	A list of DHCPv6 periodic statistics.
U32 bWagDownstreamProcessingLatencyAvg	1.3.6.1.4.1.39406.2.1.3.11.8	Unsigned32	read-only	Average processing time for subscriber downstream packets handled in WAG.
U32 bWagDownstreamProcessingLatencyMax	1.3.6.1.4.1.39406.2.1.3.11.6	Unsigned32	read-only	Maximum processing time recorded for subscriber downstream packets handled in WAG
U32 bWagDownstreamProcessingLatencyMin	1.3.6.1.4.1.39406.2.1.3.11.7	Unsigned32	read-only	Minimum processing time recorded for subscriber downstream packets handled in WAG.
U32 bWagDownstreamProcessingLatencyPktCount	1.3.6.1.4.1.39406.2.1.3.11.5	Unsigned32	read-only	The count of the total number of subscriber downstream packets handled by WAG
bWagDsLiteMIBObjects	1.3.6.1.4.1.39406.2.1.3.16			WAG DSLite objects are defined in this branch.
bWagDsLiteNotifObjects	1.3.6.1.4.1.39406.2.1.3.17			Notifications of WAG DSLite are defined in this branch.
U32 bWagDsLiteProfileMaxIPAddresses	1.3.6.1.4.1.39406.2.1.3.16.1.1.5	Unsigned32	read-only	This is the maximum number of IPs required to support the number of tunnels configured. This is calculated based on three other configuration parameters: block-size, number of port blocks, max-tunnels, as show below MAX IP Adresses = (max-tunnels/(64512/(block-size*num-blocks)) rounded up to the next multiple of 4
U32 bWagDsLiteProfileMaxSubscribers	1.3.6.1.4.1.39406.2.1.3.16.1.1.9	Unsigned32	read-only	Number of max subscribers configured in this profile.
U32 bWagDsLiteProfileMaxTunnels	1.3.6.1.4.1.39406.2.1.3.16.1.1.10	Unsigned32	read-only	Number of max tunnels configured in this profile.
STR bWagDsLiteProfileName	1.3.6.1.4.1.39406.2.1.3.16.1.1.2	DisplayString	read-only	The name of the DS-Lite profile.
STR bWagDsLiteProfileNATIPPoolGroup	1.3.6.1.4.1.39406.2.1.3.16.1.1.4	DisplayString	read-only	IP Pool group name associated with DS-Lite profile.
U32 bWagDsLiteProfileReservedIPAddresses	1.3.6.1.4.1.39406.2.1.3.16.1.1.7	Unsigned32	read-only	Number of IP addresses reserved in DS-Lite profile.
bWagDsLiteProfileStatsEntry	1.3.6.1.4.1.39406.2.1.3.16.1.1		not-accessible	A logical row in the bWagDsLiteProfileTable.
I32 bWagDsLiteProfileStatsIndex	1.3.6.1.4.1.39406.2.1.3.16.1.1.1	Integer32	not-accessible	A number uniquely identifying this DS-Lite profile.
bWagDsLiteProfileStatsTable	1.3.6.1.4.1.39406.2.1.3.16.1		not-accessible	A list of DSLite CGNAT statistics for profiles.
U32 bWagDsLiteProfileTotalPoolIPAddresses	1.3.6.1.4.1.39406.2.1.3.16.1.1.8	Unsigned32	read-only	Total number of IP addresses available in the pool.
STR bWagDsLiteProfileType	1.3.6.1.4.1.39406.2.1.3.16.1.1.3	DisplayString	read-only	The type of the CGNAT profile DS-Lite.
U32 bWagDsLiteProfileUsedIPAddresses	1.3.6.1.4.1.39406.2.1.3.16.1.1.6	Unsigned32	read-only	Number of IP addresses in use in DS-Lite profile.
C64 bWagIpIfStatsOutFragOKs	1.3.6.1.4.1.39406.2.1.3.18.2	Counter64	read-only	The number of IP datagrams that have been successfully fragmented.
bWagIpSystemStatsMIBObjects	1.3.6.1.4.1.39406.2.1.3.18			WAG IP system statistics objects are defined in this branch.
C64 bWagIpSystemStatsReasmFails	1.3.6.1.4.1.39406.2.1.3.18.3	Counter64	read-only	The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received.
C64 bWagIpSystemStatsReasmReqds	1.3.6.1.4.1.39406.2.1.3.18.1	Counter64	read-only	The number of IP fragments received that needed to be reassembled.
C64 bWagIpv6IfStatsOutFragOKs	1.3.6.1.4.1.39406.2.1.3.18.5	Counter64	read-only	The number of IPv6 datagrams that have been successfully fragmented at output interface.
C64 bWagIpv6IfStatsReasmFails	1.3.6.1.4.1.39406.2.1.3.18.6	Counter64	read-only	The number of failures detected by the IPv6 re- assembly algorithm (for whatever reason: timed out, errors, etc.).
C64 bWagIpv6IfStatsReasmReqds	1.3.6.1.4.1.39406.2.1.3.18.4	Counter64	read-only	The number of IPv6 fragments received which needed to be reassembled at this interface.
U32 bWagL2tpv3TunnelCreatedDynamically	1.3.6.1.4.1.39406.2.1.3.7.1.1.43	Unsigned32	read-only	The total number of dynamically established L2TPV3 tunnels during the measurement interval.
U32 bWagL2tpv3TunnelDeleted	1.3.6.1.4.1.39406.2.1.3.7.1.1.44	Unsigned32	read-only	The total number of L2TPV3 tunnels deleted during the measurement interval.
U32 bWagL2tpv3TunnelDeletedByCommand	1.3.6.1.4.1.39406.2.1.3.7.1.1.46	Unsigned32	read-only	The total number of L2TPV3 tunnels deleted by an operator command during the measurement interval.
U32 bWagL2tpv3TunnelDeletedDueToInactivity	1.3.6.1.4.1.39406.2.1.3.7.1.1.45	Unsigned32	read-only	The total number of L2TPV3 tunnels deleted due to inactivity during the measurement interval.
U32 bWagL2tpv3TunnelDeletedDueToLifDown	1.3.6.1.4.1.39406.2.1.3.7.1.1.47	Unsigned32	read-only	The total number of L2TPV3 tunnels deleted due to LIF down during the measurement interval.
U32 bWagL2tpv3TunnelPktsDecapsulated	1.3.6.1.4.1.39406.2.1.3.7.1.1.39	Unsigned32	read-only	The total number of packets received over a L2TPV3 tunnel that are subsequently decapsulated by the WAGMGR during the measurement interval.
U32 bWagL2tpv3TunnelPktsEncapsulated	1.3.6.1.4.1.39406.2.1.3.7.1.1.38	Unsigned32	read-only	The total number of packets encapsulated as L2TPV3 packets by the WAGMGR to be tunneled during the measurement interval.
U32 bWagL2tpv3TunnelPktsRxd	1.3.6.1.4.1.39406.2.1.3.7.1.1.37	Unsigned32	read-only	The total number of L2TPV3 packets received by WAGMGR over a L2TPV3 tunnel during the measurement interval.
U32 bWagL2tpv3TunnelPktsRxdARP	1.3.6.1.4.1.39406.2.1.3.7.1.1.40	Unsigned32	read-only	The total number of L2TPV3-encapsulated ARP packets received over a tunnel by the WAGMGR during the measurement interval.
U32 bWagL2tpv3TunnelPktsRxdDHCP	1.3.6.1.4.1.39406.2.1.3.7.1.1.41	Unsigned32	read-only	The total number of L2TPV3-encapsulated DHCP packets received over a tunnel by the WAGMGR during the measurement interval.
U32 bWagL2tpv3TunnelPktsRxdDNS	1.3.6.1.4.1.39406.2.1.3.7.1.1.42	Unsigned32	read-only	The total number of L2TPV3-encapsulated DNS packets received over a tunnel by the WAGMGR during the measurement interval.
bWagMHNMIBObjects	1.3.6.1.4.1.39406.2.1.3.14			WAG MHN objects are defined in this branch.
U32 bWagMHNProfileMaxIPAddresses	1.3.6.1.4.1.39406.2.1.3.14.1.1.5	Unsigned32	read-only	The maximum number of public IP addresses required to fully service the configured max-subscribers for the profile.
U32 bWagMHNProfileMaxSubscribers	1.3.6.1.4.1.39406.2.1.3.14.1.1.4	Unsigned32	read-only	Maximum number of subscribers per MHN profile.
STR bWagMHNProfileName	1.3.6.1.4.1.39406.2.1.3.14.1.1.2	DisplayString	read-only	The name of the MHN profile.
STR bWagMHNProfileNATIPPoolGroup	1.3.6.1.4.1.39406.2.1.3.14.1.1.3	DisplayString	read-only	IP Pool group name associated with this profile.
bWagMHNProfileStatsEntry	1.3.6.1.4.1.39406.2.1.3.14.1.1		not-accessible	A logical row in the bWagMHNProfileTable.
I32 bWagMHNProfileStatsIndex	1.3.6.1.4.1.39406.2.1.3.14.1.1.1	Integer32	not-accessible	A number uniquely identifying this MHN profile.
bWagMHNProfileStatsTable	1.3.6.1.4.1.39406.2.1.3.14.1		not-accessible	A list of statistics for the MHN profiles.
U32 bWagMHNProfileTotalPoolIPAddresses	1.3.6.1.4.1.39406.2.1.3.14.1.1.8	Unsigned32	read-only	Total number of IP addresses available in the pool.
U32 bWagMHNProfileTotalPortBlocks	1.3.6.1.4.1.39406.2.1.3.14.1.1.7	Unsigned32	read-only	Number of total port blocks in this profile. This is equivalent to (block-size) in this profile.
U32 bWagMHNProfileUsedIPAddresses	1.3.6.1.4.1.39406.2.1.3.14.1.1.6	Unsigned32	read-only	Number of IP addresses in use in this profile.
U32 bWagNumAuthenticatedSubscribers	1.3.6.1.4.1.39406.2.1.3.5.3	Unsigned32	read-only	The total number of authenticated subscribers.
U32 bWagNumAuthSubsWithPublicIPAddress	1.3.6.1.4.1.39406.2.1.3.5.6	Unsigned32	read-only	The total number of authenticated subscribers with public IP address.
U32 bWagNumCurrent8021xSubscribers	1.3.6.1.4.1.39406.2.1.3.5.12	Unsigned32	read-only	The current number of 802.1x subscribers.
U32 bWagNumCurrentDSLiteSubscribers	1.3.6.1.4.1.39406.2.1.3.5.29	Unsigned32	read-only	The current number of DSLite subscribers.
U32 bWagNumCurrentHomeDhcpDynSubs	1.3.6.1.4.1.39406.2.1.3.5.23	Unsigned32	read-only	The current number of dynamic DHCP home subscribers.
U32 bWagNumCurrentHomeDhcpStatSubs	1.3.6.1.4.1.39406.2.1.3.5.22	Unsigned32	read-only	The current number of static DHCP home subscribers.
U32 bWagNumCurrentHomePubStatSubs	1.3.6.1.4.1.39406.2.1.3.5.24	Unsigned32	read-only	The current number public static home subscribers.
U32 bWagNumCurrentHomeSubscribers	1.3.6.1.4.1.39406.2.1.3.5.18	Unsigned32	read-only	The current number of home subscribers.
U32 bWagNumCurrentHomeTransientSubs	1.3.6.1.4.1.39406.2.1.3.5.20	Unsigned32	read-only	The current number of transient home subscribers.
U32 bWagNumCurrentHomeUserStatSubs	1.3.6.1.4.1.39406.2.1.3.5.21	Unsigned32	read-only	The current number of user static home subscribers.
U32 bWagNumCurrentL2tpv3TunnelsIPv4	1.3.6.1.4.1.39406.2.1.3.7.24	Unsigned32	read-only	The current number of IPv4 L2TPV3 tunnels.
U32 bWagNumCurrentL2tpv3TunnelsSpWiFi	1.3.6.1.4.1.39406.2.1.3.7.26	Unsigned32	read-only	The number of L2TPV3 tunnels that currently serve Public Wi-Fi exclusively.
U32 bWagNumCurrentRoutedSubnetSubscribers	1.3.6.1.4.1.39406.2.1.3.5.15	Unsigned32	read-only	The current number of Routed Subnet subscribers.
U32 bWagNumCurrentSingleStaticSubscribers	1.3.6.1.4.1.39406.2.1.3.5.14	Unsigned32	read-only	The current number of Single Static subscribers.
U32 bWagNumCurrentSPWiFiSubscribers	1.3.6.1.4.1.39406.2.1.3.5.19	Unsigned32	read-only	The current number of SP-WiFi subscribers.
U32 bWagNumCurrentSSIDS2aSubscribersPmip6	1.3.6.1.4.1.39406.2.1.3.5.28	Unsigned32	read-only	The current number of PMIPv6 subscribers.
U32 bWagNumCurrentSubscribers	1.3.6.1.4.1.39406.2.1.3.5.2	Unsigned32	read-only	The current number of subscribers. This count includes authenticated, unauthenticated, and home subscribers.
U32 bWagNumCurrentTunnels	1.3.6.1.4.1.39406.2.1.3.7.2	Unsigned32	read-only	The current number of tunnels.
U32 bWagNumCurrentTunnelsDSLite	1.3.6.1.4.1.39406.2.1.3.7.27	Unsigned32	read-only	The number of tunnels that currently serve DSLite exclusively.
U32 bWagNumCurrentTunnelsHome	1.3.6.1.4.1.39406.2.1.3.7.15	Unsigned32	read-only	The number of tunnels that currently serve Home exclusively.
U32 bWagNumCurrentTunnelsIPv4	1.3.6.1.4.1.39406.2.1.3.7.10	Unsigned32	read-only	The current number of IPv4 tunnels.
U32 bWagNumCurrentTunnelsIPv6	1.3.6.1.4.1.39406.2.1.3.7.11	Unsigned32	read-only	The current number of IPv6 tunnels.
U32 bWagNumCurrentTunnelsSpWiFi	1.3.6.1.4.1.39406.2.1.3.7.14	Unsigned32	read-only	The number of tunnels that currently serve Public Wi-Fi exclusively.
U32 bWagNumCurrentTunnHomeAccept	1.3.6.1.4.1.39406.2.1.3.7.18	Unsigned32	read-only	The current number of tunnels for Home in the ACCEPT state.
U32 bWagNumCurrentTunnHomeInactive	1.3.6.1.4.1.39406.2.1.3.7.17	Unsigned32	read-only	The current number of tunnels for Home in the INACTIVE state.
U32 bWagNumCurrTunnHomeAndSpWiFi	1.3.6.1.4.1.39406.2.1.3.7.16	Unsigned32	read-only	The number of tunnels that currently serve both Home and Public Wi-Fi .
C64 bWagNumL2tpv3TunnelsCreatedDynamically	1.3.6.1.4.1.39406.2.1.3.7.19	Counter64	read-only	The total number of dynamically established L2TPV3 tunnels.
C64 bWagNumL2tpv3TunnelsDeleted	1.3.6.1.4.1.39406.2.1.3.7.20	Counter64	read-only	The total number of L2TPV3 tunnels deleted.
C64 bWagNumL2tpv3TunnelsDeletedByCommand	1.3.6.1.4.1.39406.2.1.3.7.22	Counter64	read-only	The total number of L2TPV3 tunnels deleted by an operator command.
C64 bWagNumL2tpv3TunnelsDeletedDuetoLIFDown	1.3.6.1.4.1.39406.2.1.3.7.25	Counter64	read-only	The total number of L2TPV3 tunnels deleted due to logical interface down.
C64 bWagNumL2tpv3TunnelsInactiveDeleted	1.3.6.1.4.1.39406.2.1.3.7.21	Counter64	read-only	The total number of L2TPV3 tunnels deleted due to inactivity.
U32 bWagNumL2tpv3TunnelsSubsAssociated	1.3.6.1.4.1.39406.2.1.3.7.23	Unsigned32	read-only	The total number of L2TPV3 tunnels with associated subscribers.
U32 bWagNumMigrantSubscribersCount	1.3.6.1.4.1.39406.2.1.3.5.8	Unsigned32	read-only	The count of the total number of migrant subscribers. All subscribers start out as migrant subscribers until an attempt is made to get authenticated.
U32 bWagNumOfAuthSubscribersWithPolicy	1.3.6.1.4.1.39406.2.1.3.5.10.1.5	Unsigned32	read-only	Total number of authenticated subscribers subscribed to the policy.
U32 bWagNumOfSubscribersWithPolicy	1.3.6.1.4.1.39406.2.1.3.5.10.1.4	Unsigned32	read-only	Total number subscribed to the policy.
U32 bWagNumOfUnAuthSubscribersWithPolicy	1.3.6.1.4.1.39406.2.1.3.5.10.1.6	Unsigned32	read-only	Total number of unauthenticated subscribers subscribed to the policy.
U32 bWagNumPreAuthenticatedSubscribers	1.3.6.1.4.1.39406.2.1.3.5.13	Unsigned32	read-only	The total number of pre-authenticated subscribers.
U32 bWagNumPreAuthenticatedSubscribersS2aPmip6	1.3.6.1.4.1.39406.2.1.3.5.27	Unsigned32	read-only	The total number of pre-authenticated PMIPv6 subscribers.
U32 bWagNumPreAuthHomeSubscribers	1.3.6.1.4.1.39406.2.1.3.5.26	Unsigned32	read-only	The total number of pre-authenticated Home subscribers.
U32 bWagNumPreAuthSpwifiSubscribers	1.3.6.1.4.1.39406.2.1.3.5.25	Unsigned32	read-only	The total number of pre-authenticated SPWifi subscribers.
U32 bWagNumRedirectedSubscribersCount	1.3.6.1.4.1.39406.2.1.3.5.9	Unsigned32	read-only	The count of the total number of subscribers redirected to captive portal.
U32 bWagNumSubsAuthenticatedWithIPv6Prefix	1.3.6.1.4.1.39406.2.1.3.5.11	Unsigned32	read-only	The total number of authenticated subscribers with IPv6 prefix.
U32 bWagNumSubsUnauthenticatedWithIPv6Prefix	1.3.6.1.4.1.39406.2.1.3.5.16	Unsigned32	read-only	The total number of unauthenticated subscribers with IPv6 prefix.
U32 bWagNumSubsViaStaticAuthPolicy	1.3.6.1.4.1.39406.2.1.3.5.17	Unsigned32	read-only	The total number of subscribers with static portal authentication policy.
U32 bWagNumSubsWithPrivateIPAddress	1.3.6.1.4.1.39406.2.1.3.5.5	Unsigned32	read-only	The total number of subscribers with private IP address.
C64 bWagNumTunnelsCreatedDynamicallyEx	1.3.6.1.4.1.39406.2.1.3.7.3	Counter64	read-only	The total number of dynamically established GRE tunnels.
C64 bWagNumTunnelsCreatedStatically	1.3.6.1.4.1.39406.2.1.3.7.4	Counter64	read-only	The total number of statically established GRE tunnels.
C64 bWagNumTunnelsDeleted	1.3.6.1.4.1.39406.2.1.3.7.5	Counter64	read-only	The total number of GRE tunnels deleted.
C64 bWagNumTunnelsDeletedByB2B	1.3.6.1.4.1.39406.2.1.3.7.12	Counter64	read-only	The total number of GRE tunnels deleted due to B2B subscriber deletion.
C64 bWagNumTunnelsDeletedByCommand	1.3.6.1.4.1.39406.2.1.3.7.7	Counter64	read-only	The total number of GRE tunnels deleted by an operator command.
C64 bWagNumTunnelsDeletedDuetoLIFDown	1.3.6.1.4.1.39406.2.1.3.7.13	Counter64	read-only	The total number of GRE tunnels deleted due to logical interface down.
C64 bWagNumTunnelsInactiveDeleted	1.3.6.1.4.1.39406.2.1.3.7.6	Counter64	read-only	The total number of GRE tunnels deleted due to inactivity.
U32 bWagNumTunnelsSchedDeletion	1.3.6.1.4.1.39406.2.1.3.7.9	Unsigned32	read-only	The total number of GRE tunnels scheduled for automatic deletion.
U32 bWagNumTunnelsSubsAssociated	1.3.6.1.4.1.39406.2.1.3.7.8	Unsigned32	read-only	The total number of GRE tunnels with associated subscribers.
U32 bWagNumUnauthenticatedSubscribers	1.3.6.1.4.1.39406.2.1.3.5.4	Unsigned32	read-only	The total number of unauthenticated subscribers.
U32 bWagNumUnAuthSubsWithPublicIPAddress	1.3.6.1.4.1.39406.2.1.3.5.7	Unsigned32	read-only	The total number of un authenticated subscribers with public IP address.
bWagPolicyEntry	1.3.6.1.4.1.39406.2.1.3.5.10.1		not-accessible	A logical row in the bWagPolicyTable.
I32 bWagPolicyIndex	1.3.6.1.4.1.39406.2.1.3.5.10.1.2	Integer32	not-accessible	A number uniquely identifying the policy.
STR bWagPolicyName	1.3.6.1.4.1.39406.2.1.3.5.10.1.3	DisplayString	read-only	Name of the policy.
bWagPolicyTable	1.3.6.1.4.1.39406.2.1.3.5.10		not-accessible	A list of policies and the relevant subscription data
INT bWagPolicyType	1.3.6.1.4.1.39406.2.1.3.5.10.1.1	INTEGER	not-accessible	This object is used to identify the type of policy.
bWagProcessingLatencyMIBObjects	1.3.6.1.4.1.39406.2.1.3.11			WAG Processing Latency objects are defined in this branch.
bWagProcessingLatencyNotifObjects	1.3.6.1.4.1.39406.2.1.3.12			Notifications of WAG Processing Latency are defined in this branch.
U32 bWagRadiusAccessAcceptReceived	1.3.6.1.4.1.39406.2.1.3.1.1.1.12	Unsigned32	read-only	The count of the total number of Access-Accept message(s) received during the reporting period.
U32 bWagRadiusAccessRejectReceived	1.3.6.1.4.1.39406.2.1.3.1.1.1.13	Unsigned32	read-only	The count of the total number of Access-Reject message(s) received during the reporting period.
U32 bWagRadiusAccessRequestSent	1.3.6.1.4.1.39406.2.1.3.1.1.1.11	Unsigned32	read-only	The count of the total number of Access-Request message(s) sent during the reporting period.
U32 bWagRadiusAcctLatencyAvg	1.3.6.1.4.1.39406.2.1.3.1.1.1.9	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all Accounting-Request message(s) (Start/Interim Update/Stop) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Accounting-Response message(s) received by the Client Proxy. The value is in microseconds.
U32 bWagRadiusAcctLatencyLast	1.3.6.1.4.1.39406.2.1.3.1.1.1.10	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent Accounting-Request message (Start/Interim Update/Stop) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Accounting-Response message(s) received by the Client Proxy. The value is in microseconds.
U32 bWagRadiusAcctLatencyMax	1.3.6.1.4.1.39406.2.1.3.1.1.1.8	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all Accounting-Request message(s) (Start/Interim Update/Stop) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Accounting-Response message(s) received by the Client Proxy. The value is in microseconds.
U32 bWagRadiusAcctLatencyMin	1.3.6.1.4.1.39406.2.1.3.1.1.1.7	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all Accounting-Request message(s) (Start/Interim Update/Stop) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Accounting-Response message received by the Client Proxy. The value is in microseconds.
U32 bWagRadiusAcctRequestSent	1.3.6.1.4.1.39406.2.1.3.1.1.1.14	Unsigned32	read-only	The count of the total number of Accounting-Request message(s) sent during the reporting period.
U32 bWagRadiusAcctResponseReceived	1.3.6.1.4.1.39406.2.1.3.1.1.1.15	Unsigned32	read-only	The count of the total number of Accounting-Response message(s) received during the reporting period.
U32 bWagRadiusAuthLatencyAvg	1.3.6.1.4.1.39406.2.1.3.1.1.1.5	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all Access-Request message(s) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Access-Accept/Reject message(s) received by the Client Proxy. The value is in microseconds.
U32 bWagRadiusAuthLatencyLast	1.3.6.1.4.1.39406.2.1.3.1.1.1.6	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent Access-Request message(s) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Access-Accept/Reject message(s) received by the Client Proxy. The value is in microseconds.
U32 bWagRadiusAuthLatencyMax	1.3.6.1.4.1.39406.2.1.3.1.1.1.4	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all Access-Request message(s) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Access-Accept/Reject message(s) received by the Client Proxy. The value is in microseconds.
U32 bWagRadiusAuthLatencyMin	1.3.6.1.4.1.39406.2.1.3.1.1.1.3	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all Access-Request message(s) sent by the Client Proxy to the AAA process residing in the WAG and the corresponding Access-Accept/Reject message(s) received by the Client Proxy. The value is in microseconds.
U32 bWagRadiusCoAAckSent	1.3.6.1.4.1.39406.2.1.3.1.1.1.16	Unsigned32	read-only	The count of the total number of CoA-Ack message(s) sent during the reporting period.
U32 bWagRadiusCoALatencyAvg	1.3.6.1.4.1.39406.2.1.3.1.1.1.21	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all CoA-Request message(s) received from the AAA and their corresponding CoA-Ack/Nack message(s) sent by the WAG. The value is in microseconds.
U32 bWagRadiusCoALatencyLast	1.3.6.1.4.1.39406.2.1.3.1.1.1.22	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent CoA-Request message received from the AAA and its corresponding CoA-Ack/Nack message received by the WAG. The value is in microseconds.
U32 bWagRadiusCoALatencyMax	1.3.6.1.4.1.39406.2.1.3.1.1.1.20	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all CoA-Request message(s) received from the AAA and their corresponding CoA-Ack/Nack message(s) sent by the WAG. The value is in microseconds.
U32 bWagRadiusCoALatencyMin	1.3.6.1.4.1.39406.2.1.3.1.1.1.19	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all CoA-Request message(s) received from the AAA and their corresponding CoA-Ack/Nack message(s) sent by the WAG. The value is in microseconds.
U32 bWagRadiusCoANackSent	1.3.6.1.4.1.39406.2.1.3.1.1.1.17	Unsigned32	read-only	The count of the total number of CoA-Nack message(s) sent during the reporting period.
U32 bWagRadiusCoARequestReceived	1.3.6.1.4.1.39406.2.1.3.1.1.1.18	Unsigned32	read-only	The count of the total number of CoA-Request message(s) received during the reporting period.
U32 bWagRadiusDMAckSent	1.3.6.1.4.1.39406.2.1.3.1.1.1.27	Unsigned32	read-only	The count of the total number of DM-Ack message(s) sent during the reporting period.
U32 bWagRadiusDMLatencyAvg	1.3.6.1.4.1.39406.2.1.3.1.1.1.25	Unsigned32	read-only	The measure of the average time interval, during the reporting period, between all DM message(s) received from the AAA and their corresponding DM Ack/Nack message(s) sent by the WAG. The value is in microseconds.
U32 bWagRadiusDMLatencyLast	1.3.6.1.4.1.39406.2.1.3.1.1.1.26	Unsigned32	read-only	The measure of the time interval, during the reporting period, between the most recent DM message received from the AAA and its corresponding DM Ack/Nack message received by the WAG. The value is in microseconds.
U32 bWagRadiusDMLatencyMax	1.3.6.1.4.1.39406.2.1.3.1.1.1.24	Unsigned32	read-only	The measure of the maximum time interval, during the reporting period, between all DM message(s) received from the AAA and their corresponding DM Ack/Nack message(s) sent by the WAG. The value is in microseconds.
U32 bWagRadiusDMLatencyMin	1.3.6.1.4.1.39406.2.1.3.1.1.1.23	Unsigned32	read-only	The measure of the minimum time interval, during the reporting period, between all DM message(s) received from the AAA and their corresponding DM-Ack/Nack message(s) sent by the WAG. The value is in microseconds.
U32 bWagRadiusDMNackSent	1.3.6.1.4.1.39406.2.1.3.1.1.1.28	Unsigned32	read-only	The count of the total number of DM-Nack message(s) Sent during the reporting period.
U32 bWagRadiusDMRequestReceived	1.3.6.1.4.1.39406.2.1.3.1.1.1.29	Unsigned32	read-only	The count of the total number of DM-Request message(s) received during the reporting period.
bWagRadiusEntry	1.3.6.1.4.1.39406.2.1.3.1.1.1		not-accessible	A logical row in the bWagRadiusTable.
I32 bWagRadiusIntervalDuration	1.3.6.1.4.1.39406.2.1.3.1.1.1.2	Integer32	read-only	Duration of stats interval in minutes
bWagRadiusMIBObjects	1.3.6.1.4.1.39406.2.1.3.1			WAG RADIUS statistics are defined in this branch.
bWagRadiusNotifObjects	1.3.6.1.4.1.39406.2.1.3.2			Notifications of WAG RADIUS statistics are defined in this branch.
I32 bWagRadiusStatsInterval	1.3.6.1.4.1.39406.2.1.3.1.1.1.1	Integer32	not-accessible	The interval where the measurements were accumulated. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i
bWagRadiusTable	1.3.6.1.4.1.39406.2.1.3.1.1		not-accessible	A list of RADIUS statistics.
STR bWagrgApiIPPoolGroup	1.3.6.1.4.1.39406.2.1.3.15.3	DisplayString	read-only	IP Pool group name associated with Mhn profile.
bWagStatsNotifications	1.3.6.1.4.1.39406.2.1.3.0			WAG stats notifications are defined in this branch.
U32 bWagSubscriberAbsoluteTimeoutCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.16	Unsigned32	read-only	The total number of automatic subscriber deletions due to absolute timeout during the reporting period.
U32 bWagSubscriberActivationsCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.3	Unsigned32	read-only	The total number of subscriber activations during the reporting period. This includes all subscriber attaches into the WAG system. For example, if a subscriber attaches and then detaches and attaches again, it will be considered as 2 activations.
U32 bWagSubscriberAPMobilityOccurencesCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.8	Unsigned32	read-only	The total number of AP mobility occurences for all subscribers during the reporting period.
U32 bWagSubscriberAuthenticationsCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.5	Unsigned32	read-only	The total number of authentications during the reporting period. Includes (a) number of times pre-authenticated subscribers are admitted into the WAG, and (b) number of times subscribers have been authenticated via captive portal. Note 1: A pre-authenticated subscriber is one for whom a captive portal URL is not received in the RADIUS Access-Accept message. Note 2: Multiple successful authentications for the same subscriber are counted independent of each other.
U32 bWagSubscriberAuthenticationsCountVia8021x	1.3.6.1.4.1.39406.2.1.3.5.1.1.18	Unsigned32	read-only	The total number of authentications via 802.1x during the reporting period.
U32 bWagSubscriberAuthenticationsCountViaRoutedSubnet	1.3.6.1.4.1.39406.2.1.3.5.1.1.20	Unsigned32	read-only	The total number of authentications via B2B Routed Subnet during the reporting period.
U32 bWagSubscriberAuthenticationsCountViaSingleStatic	1.3.6.1.4.1.39406.2.1.3.5.1.1.19	Unsigned32	read-only	The total number of authentications via B2B Single Static during the reporting period.
U32 bWagSubscriberAuthsViaPortalCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.17	Unsigned32	read-only	The total number of authentications via captive portal during the reporting period.
U32 bWagSubscriberDeletionsByDMCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.9	Unsigned32	read-only	The total number of subscriber deletions by Disconnect-Message during the reporting period.
U32 bWagSubscriberDeletionsCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.4	Unsigned32	read-only	The total number of subscriber deletions during the the reporting period.
U32 bWagSubscriberDroppedByLicenseManagerCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.13	Unsigned32	read-only	The total number of subscriber attach attempts that are dropped due to license restrictions during the reporting period.
U32 bWagSubscriberDsLiteActivationsCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.30	Unsigned32	read-only	The total number of DSLite subscriber activations during the reporting period. This includes all DSLite subscriber attaches into the WAG system. For example, if a subscriber attaches and then detaches and attaches again, it will be considered as 2 activations.
bWagSubscriberEntry	1.3.6.1.4.1.39406.2.1.3.5.1.1		not-accessible	A logical row in the bWagSubscriberTable.
U32 bWagSubscriberHomeActivationsCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.29	Unsigned32	read-only	The total number of Home subscriber activations during the reporting period. This includes all Home subscriber attaches into the WAG system. For example, if a subscriber attaches and then detaches and attaches again, it will be considered as 2 activations.
U32 bWagSubscriberHomeDhcpDynSubsDeleted	1.3.6.1.4.1.39406.2.1.3.5.1.1.26	Unsigned32	read-only	The total number of home dhcp dynamic subscriber deletions during the the reporting period.
U32 bWagSubscriberHomeDhcpStaticSubsDeleted	1.3.6.1.4.1.39406.2.1.3.5.1.1.25	Unsigned32	read-only	The total number of home dhcp static subscriber deletions during the the reporting period.
U32 bWagSubscriberHomePubStaticSubsDeleted	1.3.6.1.4.1.39406.2.1.3.5.1.1.27	Unsigned32	read-only	The total number of home public subscriber deletions during the the reporting period.
U32 bWagSubscriberHomeTotalSubsDeleted	1.3.6.1.4.1.39406.2.1.3.5.1.1.22	Unsigned32	read-only	The total number of home subscriber deletions during the the reporting period.
U32 bWagSubscriberHomeTransientSubsDeleted	1.3.6.1.4.1.39406.2.1.3.5.1.1.23	Unsigned32	read-only	The total number of home transient subscriber deletions during the the reporting period.
U32 bWagSubscriberHomeUserStaticSubsDeleted	1.3.6.1.4.1.39406.2.1.3.5.1.1.24	Unsigned32	read-only	The total number of home user static subscriber deletions during the the reporting period.
U32 bWagSubscriberIdleTimeoutCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.10	Unsigned32	read-only	The total number of automatic subscriber deletions due to idle timeout during the reporting period.
I32 bWagSubscriberIntervalDuration	1.3.6.1.4.1.39406.2.1.3.5.1.1.2	Integer32	read-only	Duration of statistics interval (or reporting period) in minutes
bWagSubscriberMIBObjects	1.3.6.1.4.1.39406.2.1.3.5			WAG subscriber statistics are defined in this branch.
bWagSubscriberNotifObjects	1.3.6.1.4.1.39406.2.1.3.6			Notifications of WAG subscriber statistics are defined in this branch.
U32 bWagSubscriberRedirectionsByAcl	1.3.6.1.4.1.39406.2.1.3.5.1.1.7	Unsigned32	read-only	The total number of redirections of authenticated subscribers due to an ACL rule during the reporting period. This count will increment for each redirection of a HTTP-GET request for an authenticated subscriber if Benu-ACL-Redirect-URL VSA was received for the subscriber
U32 bWagSubscriberRedirectionsCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.6	Unsigned32	read-only	The total number of subscriber redirections to the captive portal during the reporting period. One subscriber can contribute multiple times this count.
U32 bWagSubscriberSessionTimeoutAuthVia8021x	1.3.6.1.4.1.39406.2.1.3.5.1.1.21	Unsigned32	read-only	The total number of automatic deletions due to session timeout of subscribers that were authenticated via 802.1x during the reporting period.
U32 bWagSubscriberSessionTimeoutAuthviaportalCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.12	Unsigned32	read-only	The total number of automatic deletions due to session timeout of subscribers that were authenticated via captive portal during the reporting period.
U32 bWagSubscriberSessionTimeoutPreauthCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.11	Unsigned32	read-only	The total number of automatic deletions due to session timeout of pre-authenticated subscribers during the reporting period.
U32 bWagSubscriberSpWifiActivationsCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.28	Unsigned32	read-only	The total number of Spwifi subscriber activations during the reporting period. This includes all Spwifi subscriber attaches into the WAG system. For example, if a subscriber attaches and then detaches and attaches again, it will be considered as 2 activations.
I32 bWagSubscriberStatsInterval	1.3.6.1.4.1.39406.2.1.3.5.1.1.1	Integer32	not-accessible	The interval for acculating the measurements. The interval index one indicates the latest interval for which statistics accumulation was completed. Older the statistics interval data, greater the interval index value. In a system supporting a history of n intervals with IntervalCount(1) and IntervalCount(n) the most and least recent intervals respectively, the following applies at the end of a interval: - discard the value of IntervalCount(n) - the value of IntervalCount(i) becomes that of IntervalCount(i+1) for 1 <= i < n - the value of IntervalCount(1) becomes that of CurrentCount
bWagSubscriberTable	1.3.6.1.4.1.39406.2.1.3.5.1		not-accessible	A list of WAG subscriber statistics.
U32 bWagSubscriberThrottledCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.15	Unsigned32	read-only	The number of subscribers whose attempt to reach the captive portal was throttled during the reporting period.
U32 bWagSubscriberThrottlingOccurrencesCount	1.3.6.1.4.1.39406.2.1.3.5.1.1.14	Unsigned32	read-only	The total number of times an attempt by any subscriber to reach the captive portal was throttled during the reporting period.
U32 bWagTunnelCountHighThreshold	1.3.6.1.4.1.39406.2.1.3.7.1.1.30	Unsigned32	read-only	The high threshold for the number of tunnels that are created. If no bWagTunHighThresholdReached event was previously generated, or, if a bWagTunLowThresholdReached event was previously generated, and the current count of tunnels exceeds the value of bWagTunnelCountHighThreshold, then a bWagTunHighThresholdReached event will be generated. No more bWagTunHighThresholdReached events will be generated until the value for the current count of tunnels becomes equal to or less than the value of bWagTunnelCountLowThreshold.
U32 bWagTunnelCountLowThreshold	1.3.6.1.4.1.39406.2.1.3.7.1.1.31	Unsigned32	read-only	The low threshold for the number of tunnels that are created. If a bWagTunHighThresholdReached event was previously generated, and, the current count of tunnels falls below the value of bWagTunnelCountLowThreshold, then a bWagTunLowThresholdReached event will be generated. No more bWagTunLowThresholdReached events will be generated until the value for the current count of tunnels becomes equal to or greater than the value of bWagTunnelCountHighThreshold.
U32 bWagTunnelCreatedDynamically	1.3.6.1.4.1.39406.2.1.3.7.1.1.21	Unsigned32	read-only	The total number of dynamically established GRE tunnels during the measurement interval.
U32 bWagTunnelCreatedStatically	1.3.6.1.4.1.39406.2.1.3.7.1.1.22	Unsigned32	read-only	The total number of statically established GRE tunnels during the measurement interval.
U32 bWagTunnelDeleted	1.3.6.1.4.1.39406.2.1.3.7.1.1.23	Unsigned32	read-only	The total number of GRE tunnels deleted during the measurement interval.
U32 bWagTunnelDeletedByCommand	1.3.6.1.4.1.39406.2.1.3.7.1.1.25	Unsigned32	read-only	The total number of GRE tunnels deleted by an operator command during the measurement interval.
U32 bWagTunnelDeletedDueToAbort	1.3.6.1.4.1.39406.2.1.3.7.1.1.33	Unsigned32	read-only	The total number of GRE tunnels deleted due to AAA Abort during the measurement interval.
U32 bWagTunnelDeletedDueToB2bSubsDelete	1.3.6.1.4.1.39406.2.1.3.7.1.1.36	Unsigned32	read-only	The total number of GRE tunnels deleted due to B2B subscriber delete during the measurement interval.
U32 bWagTunnelDeletedDueToInactivity	1.3.6.1.4.1.39406.2.1.3.7.1.1.24	Unsigned32	read-only	The total number of GRE tunnels deleted due to inactivity during the measurement interval.
U32 bWagTunnelDeletedDueToLifDown	1.3.6.1.4.1.39406.2.1.3.7.1.1.35	Unsigned32	read-only	The total number of GRE tunnels deleted due to LIF down during the measurement interval.
U32 bWagTunnelDeletedDueToMacResFail	1.3.6.1.4.1.39406.2.1.3.7.1.1.34	Unsigned32	read-only	The total number of GRE tunnels deleted due to MAC resolution failure during the measurement interval.
U32 bWagTunnelDeletedDueToReject	1.3.6.1.4.1.39406.2.1.3.7.1.1.32	Unsigned32	read-only	The total number of GRE tunnels deleted due to AAA Reject during the measurement interval.
bWagTunnelEntry	1.3.6.1.4.1.39406.2.1.3.7.1.1		not-accessible	A logical row in the bWagTunnelTable.
I32 bWagTunnelIntervalDuration	1.3.6.1.4.1.39406.2.1.3.7.1.1.2	Integer32	read-only	Duration of statistics accumulation interval in minutes.
U32 bWagTunnelMaxCountReached	1.3.6.1.4.1.39406.2.1.3.7.1.1.27	Unsigned32	read-only	The maximum value of the total number of GRE/L2TPV3 tunnels reached during the measurement interval.
U32 bWagTunnelMaxSupported	1.3.6.1.4.1.39406.2.1.3.7.1.1.26	Unsigned32	read-only	The total number of GRE/L2TPV3 tunnels supported in WAG.
bWagTunnelNotifObjects	1.3.6.1.4.1.39406.2.1.3.8			Notifications of WAG tunnel statistics are defined in this branch.
U32 bWagTunnelPktsDecapsulatedGRE	1.3.6.1.4.1.39406.2.1.3.7.1.1.7	Unsigned32	read-only	The total number of packets received over a GRE tunnel that are subsequently decapsulated by the WAGMGR during the measurement interval.
U32 bWagTunnelPktsEncapsulatedGRE	1.3.6.1.4.1.39406.2.1.3.7.1.1.6	Unsigned32	read-only	The total number of packets encapsulated as GRE packets by the WAGMGR to be tunneled during the measurement interval.
U32 bWagTunnelPktsRxdARP	1.3.6.1.4.1.39406.2.1.3.7.1.1.8	Unsigned32	read-only	The total number of GRE-encapsulated ARP packets received over a tunnel by the WAGMGR during the measurement interval.
U32 bWagTunnelPktsRxdDHCP	1.3.6.1.4.1.39406.2.1.3.7.1.1.9	Unsigned32	read-only	The total number of GRE-encapsulated DHCP packets received over a tunnel by the WAGMGR during the measurement interval.
U32 bWagTunnelPktsRxdDNS	1.3.6.1.4.1.39406.2.1.3.7.1.1.10	Unsigned32	read-only	The total number of GRE-encapsulated DNS packets received over a tunnel by the WAGMGR during the measurement interval.
U32 bWagTunnelPktsRxdGRE	1.3.6.1.4.1.39406.2.1.3.7.1.1.3	Unsigned32	read-only	The total number of GRE packets received by WAGMGR over a GRE tunnel during the measurement interval.
U32 bWagTunnelPktsRxdGREPayloadMPLS	1.3.6.1.4.1.39406.2.1.3.7.1.1.5	Unsigned32	read-only	The total number of GRE packets of protocol type Multiprotocol Label Switching received by WAGMGR over a GRE tunnel during the measurement interval, i.e, GRE packets with protocol type field in the header set to 0x8847.
U32 bWagTunnelPktsRxdGREPayloadTEB	1.3.6.1.4.1.39406.2.1.3.7.1.1.4	Unsigned32	read-only	The total number of GRE packets of protocol type Transparent Ethernet Bridging received by WAGMGR over a GRE tunnel during the measurement interval, i.e, GRE packets with protocol type field in the header set to 0x6558.
U32 bWagTunnelPktsRxdHTTP	1.3.6.1.4.1.39406.2.1.3.7.1.1.11	Unsigned32	read-only	The total number of GRE-encapsulated HTTP packets received over a tunnel by the WAGMGR during the measurement interval.
U32 bWagTunnelPktsRxdHTTPGetReq	1.3.6.1.4.1.39406.2.1.3.7.1.1.12	Unsigned32	read-only	The total number of GRE-encapsulated HTTP-GET packets received over a tunnel by the WAGMGR during the measurement interval.
U32 bWagTunnelPktsRxdHTTPS	1.3.6.1.4.1.39406.2.1.3.7.1.1.15	Unsigned32	read-only	The total number of GRE-encapsulated HTTPS packets received over a tunnel by the WAGMGR during the measurement interval.
U32 bWagTunnelPktsRxdTCPFinAck	1.3.6.1.4.1.39406.2.1.3.7.1.1.19	Unsigned32	read-only	The total number of GRE-encapsulated TCP FIN/ACK packets received over a tunnel by the WAGMGR during the measurement interval.
U32 bWagTunnelPktsRxdTCPSyn	1.3.6.1.4.1.39406.2.1.3.7.1.1.16	Unsigned32	read-only	The total number of GRE-encapsulated TCP SYN packets received over a tunnel by the WAGMGR during the measurement interval.
U32 bWagTunnelPktsTxdHTTP	1.3.6.1.4.1.39406.2.1.3.7.1.1.13	Unsigned32	read-only	The total number of GRE-encapsulated HTTP packets transmitted by the WAGMGR over a tunnel during the measurement interval.
U32 bWagTunnelPktsTxdHTTPRedir	1.3.6.1.4.1.39406.2.1.3.7.1.1.14	Unsigned32	read-only	The total number of GRE-encapsulated HTTP packets with status code 302 transmitted by the WAGMGR over a tunnel during the measurement interval.
U32 bWagTunnelPktsTxdTCPAck2Fin	1.3.6.1.4.1.39406.2.1.3.7.1.1.20	Unsigned32	read-only	The total number of GRE-encapsulated TCP ACK packets transmitted in response to a TCP FIN packet by the WAGMGR during the measurement interval.
U32 bWagTunnelPktsTxdTCPFin	1.3.6.1.4.1.39406.2.1.3.7.1.1.18	Unsigned32	read-only	The total number of GRE-encapsulated TCP FIN packets transmitted by the WAGMGR over a tunnel during the measurement interval.
U32 bWagTunnelPktsTxdTCPSynAck	1.3.6.1.4.1.39406.2.1.3.7.1.1.17	Unsigned32	read-only	The total number of GRE-encapsulated TCP SYN-ACK packets transmitted by the WAGMGR over a tunnel during the measurement interval.
I32 bWagTunnelStatsInterval	1.3.6.1.4.1.39406.2.1.3.7.1.1.1	Integer32	not-accessible	The interval during which the measurements are accumulated. Interval index 1 indicates the latest interval for which statistics accumulation is completed. Older the statistics, greater the interval index value. In a system supporting a history of n intervals with interval count 1 and interval count n, the most and the least recent intervals respectively, the following apply at the end of an interval: - statistics for interval count n are discarded - the statistics for interval count i become statistics for interval count i + 1, where 1 <= i < n - current statistics become statistics for interval count 1.
bWagTunnelStatsMIBObjects	1.3.6.1.4.1.39406.2.1.3.7			WAG tunnel statistics are defined in this branch.
bWagTunnelTable	1.3.6.1.4.1.39406.2.1.3.7.1		not-accessible	A list of WAG Tunnel statistics.
U32 bWagTunnelTunnelsLookupFound	1.3.6.1.4.1.39406.2.1.3.7.1.1.28	Unsigned32	read-only	The total number of successful tunnel lookup operations performed in the WAGMGR during a measurement interval.
U32 bWagTunnelTunnelsLookupNotFound	1.3.6.1.4.1.39406.2.1.3.7.1.1.29	Unsigned32	read-only	The total number of unsuccesful tunnel lookup operations performed in the WAGMGR during a measurement interval.
U32 bWagUpstreamProcessingLatencyAvg	1.3.6.1.4.1.39406.2.1.3.11.4	Unsigned32	read-only	Average processing time for subscriber upstream packets handled in WAG
U32 bWagUpstreamProcessingLatencyMax	1.3.6.1.4.1.39406.2.1.3.11.2	Unsigned32	read-only	Maximum processing time recorded for subscriber upstream packets handled in WAG
U32 bWagUpstreamProcessingLatencyMin	1.3.6.1.4.1.39406.2.1.3.11.3	Unsigned32	read-only	Minimum processing time recorded for subscriber upstream packets handled in WAG
U32 bWagUpstreamProcessingLatencyPktCount	1.3.6.1.4.1.39406.2.1.3.11.1	Unsigned32	read-only	The count of the total number of subscriber upstream packets handled by WAG
NTF bWagVrgApiIpAddressesExhausted	1.3.6.1.4.1.39406.2.1.3.0.10			This notification signifies that the current number of used IP addresses VRGApisubscribers are exhausted from pool group
U32 bWagVrgApiIpAddrUsedHighThreshold	1.3.6.1.4.1.39406.2.1.3.15.1	Unsigned32	accessible-for-notify	The high threshold for the number of used IP addresses for VRGAPI subscribers. If the number of used IP addresses exceeds this value, a bWagVrgApiIpAddrUsedHighThresholdReached event will be generated. No more bWagVrgApiIpAddrUsedHighThresholdReached events will be generated until the value of the number of used IP addresses for VRGAPI subscribers becomes equal to or less than the value of bWagVrgApiIpAddrUsedLowThreshold.
NTF bWagVrgApiIpAddrUsedHighThresholdReached	1.3.6.1.4.1.39406.2.1.3.0.8			This notification signifies that the current number of used IP addresses for VRGAPI subscribers has risen above the value of bWagVrgApiIpAddrUsedHighThreshold.
U32 bWagVrgApiIpAddrUsedLowThreshold	1.3.6.1.4.1.39406.2.1.3.15.2	Unsigned32	accessible-for-notify	The low threshold for the number of used IP addresses for VRGAPI subscribers. If a bWagVrgApiIpAddrUsedHighThreshold event had previously been generated, and if the number of used IP addresses equals to or falls below this value, a bWagVrgApiIpAddrUsedLowThresholdReached event will be generated. No more bWagVrgApiIpAddrUsedLowThresholdReached events will be generated until the value of the number of used IP addresses for VRGAPI subscribers exceeds bWagVrgApiIpAddrUsedHighThreshold and a bWagVrgApiIpAddrUsedHighThresholdReached is first generated.
NTF bWagVrgApiIpAddrUsedLowThresholdReached	1.3.6.1.4.1.39406.2.1.3.0.9			This notification signifies that the current number of used IP addresses for VRGAPI subscribers has fallen below the value of bWagVrgApiIpAddrUsedLowThreshold.
U32 bWagVRGApiIPoolIPAddresses	1.3.6.1.4.1.39406.2.1.3.15.4	Unsigned32	accessible-for-notify	The total number of IP addresses available in the pool.
bWagVrgApiNotifObjects	1.3.6.1.4.1.39406.2.1.3.15			Notifications of WAG VrgApi are defined in this branch.

RFC description

Vendor-private MIB for Benu Networks Wireless Access Gateway (WAG); provides statistics and monitoring objects for wireless gateway devices.

Start monitoring Benu Networks (Ciena) broadband/WiFi Access Gateway (WAG) platforms with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BENU-WAG-STATS-MIB