SLE-DEBUG-MIB

All MIBs › SLE-DEBUG-MIB

Organization: Organization.

Last Updated: 2004-12-08

Category: DASAN Networks SLE OLT Management

Description: Provides DASAN Networks SLE OLT diagnostic and debug logging controls for fault isolation.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SLE-DEBUG-MIB?

SLE-DEBUG-MIB is a DASAN Networks vendor-specific MIB for their SLE-series OLT platforms, providing RMON-based diagnostic and debug logging controls used for fault isolation. It exposes configuration objects that let an operator enable or disable debug and RMON features on the device, controlling diagnostic data collection rather than exposing routine operational counters. Its role in monitoring is indirect: rather than reporting temperature or CPU load, it lets engineers turn on deeper packet/event capture and logging so that software or protocol-level faults on the OLT can be traced and root-caused. It builds on standard RMON MIB concepts (as its description notes, covering RMON and supported SLE RMON features), making it a companion to RFC 2819 RMON rather than a standalone data source. It is typically used by DASAN OLT vendor support/engineering staff during troubleshooting sessions rather than for routine continuous monitoring. Engineers can download the SLE-DEBUG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SLE-DEBUG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN Networks SLE-series OLT (GPON/EPON access node)

Monitoring Examples

A support engineer would enable specific debug/RMON feature flags in this MIB to start capturing diagnostic traces on an SLE OLT exhibiting an intermittent fault, then disable them once the root cause is found. No concrete sample objects were available for this module, so exact object names cannot be confirmed, but the module is expected to follow the typical DASAN pattern of feature-enable scalars paired with RMON-style statistics tables. This MIB is used for diagnostic control rather than routine performance/health monitoring.

What Can Be Monitored

debug logging feature status
RMON feature enablement
diagnostic trace controls

Imported Objects

From DASAN-SMI

sleMgmt

OBJECT-IDENTITY

From SLE-TC-MIB

SleControlRequestResultType
SleControlStatusType

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

BITS
Gauge32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

OIDs

OID symbolic	OID numeric	Type	Access	Description
sleDebug	1.3.6.1.4.1.6296.101.99			This MIB contains all needed informations about rmon and all supported sle rmon features.
sleDebugBase	1.3.6.1.4.1.6296.101.99.1
sleDebugStatus	1.3.6.1.4.1.6296.101.99.1.1
BIT sleDebugDhcpStatus	1.3.6.1.4.1.6296.101.99.1.1.1	Bits	read-only	The debug option setting of dhcp daemon. debugFilter(0), debugLease(1), debugPacket(2), debugServices(3), The above value is denotes by 'or'.
BIT sleDebugIgmpStatus	1.3.6.1.4.1.6296.101.99.1.1.2	Bits	read-only	The debug option setting of Igmp daemon. debugDecode(0), debugEncode(1), debugEvents(2), debugFsm(3), debugTib(4) The above value is denotes by 'or'.
BIT sleDebugIgmpSnoopStatus	1.3.6.1.4.1.6296.101.99.1.1.3	Bits	read-only	The debug option setting of Igmp Snoop function. debugTcn(0) The above value is denotes by 'or'.
BIT sleDebugNsmStatus	1.3.6.1.4.1.6296.101.99.1.1.4	Bits	read-only	The debug option setting of Nsm function. debugEvents(0), debugKernel(1), debugPacketDetail(2), debugPacketRecv(3), debugPacketSend(4) The above value is denotes by 'or'.
BIT sleDebugNsmMcastStatus	1.3.6.1.4.1.6296.101.99.1.1.5	Bits	read-only	The debug option setting of Nsm Mcast function. debugMcastFibMsg(0), debugMcastMrt(1), debugMcastRegister(2), debugMcastStats(3), debugMcastVif(4) The above value is denotes by 'or'.
BIT sleDebugBgpStatus	1.3.6.1.4.1.6296.101.99.1.1.6	Bits	read-only	The debug option setting of Bgp deamon. debugNormal(0), debugDampening(1), debugEvents(2), debugFilters(3), debugFsm(4), debugKeepalives(5), debugNsm(6), debugUpdatesIn(7), debugUpdatesOut(8) The above value is denotes by 'or'.
BIT sleDebugOspfStatus	1.3.6.1.4.1.6296.101.99.1.1.7	Bits	read-only	The debug option setting of Ospf deamon. debugEventAbr(0), debugEventAsbr(1), debugEventLsa(2), debugEventNssa(3), debugEventOs(4), debugEventRouter(5), debugEventVlink(6), debugIfsmEvent(7), debugIfsmStatus(8), debugIfsmTimers(9), debugLsaFlooding(10), debugLsaGenerate(11), debugLsaInstall(12), debugLsaMaxage(13), debugLsaRefrash(14), debugNfsmEvents(15), debugNfsmStatus(16), debugNfsmTimers(17), debugNsmInterface(18), debugNsmRedistribute(19), debugRouteAse(20), debugRouteIa(21), debugRouteInstall(22), debugRouteSpf(23), debugPacketDDDetail(24), debugPacketDDRecv(25), debugPacketDDSend(26), debugPacketHelloDetail(27), debugPacketHelloRecv(28), debugPacketHelloSend(29), debugPacketLsAckDetail(30), debugPacketLsAckRecv(31), debugPacketLsAckSend(32), debugPacketLsRequestDetail(33), debugPacketLsRequestRecv(34), debugPacketLsRequestSend(35), debugPacketLsUpdateDetail(36), debugPacketLsUpdateRecv(37), debugPacketLsUpdateSend(38) Thee above value is denotes by 'or'.
BIT sleDebugPimStatus	1.3.6.1.4.1.6296.101.99.1.1.8	Bits	read-only	The debug option setting of Pim deamon. debugEvent(0), debugMfc(1), debugMib(2), debugNexthop(3), debugNsm(4), debugPacketIn(5), debugPacketOut(6), debugState(7), debugTimerAssertAt(8), debugTimerBsr(9), debugTimerBsrBst(10), debugTimerBsrCrp(11), debugTimerHello(12), debugTimerHelloHt(13), debugTimerHelloNlt(14), debugTimerHelloTht(15), debugTimerJoinprune(16), debugTimerJoinpruneEt(17), debugTimerJoinpruneJt(18), debugTimerJoinpruneKat(19), debugTimerJoinpruneOt(20), debugTimerJoinprunePpt(21), debugTimerRegister(22) The above value is denotes by 'or'.
BIT sleDebugRipStatus	1.3.6.1.4.1.6296.101.99.1.1.9	Bits	read-only	The debug option setting of Rip deamon. debugEvents(0), debugNsm(1), debugPacketDetail(2), debugPacketRecv(3), debugPacketSend(4) The above value is denotes by 'or'.
sleDebugStatusControl	1.3.6.1.4.1.6296.101.99.1.2
INT sleDebugControlRequest	1.3.6.1.4.1.6296.101.99.1.2.1	INTEGER	read-write	.
SLE sleDebugControlStatus	1.3.6.1.4.1.6296.101.99.1.2.2	SleControlStatusType	read-only	The status of a user command.
G32 sleDebugControlTimer	1.3.6.1.4.1.6296.101.99.1.2.3	Gauge32	read-write	The maximum wait time for the manager for a long running user command.
TIK sleDebugControlTimeStamp	1.3.6.1.4.1.6296.101.99.1.2.4	TimeTicks	read-only	The time stamp of the last command (end of command).
SLE sleDebugControlReqResult	1.3.6.1.4.1.6296.101.99.1.2.5	SleControlRequestResultType	read-only	The result of the last user command.
BIT sleDebugControlDhcpStatus	1.3.6.1.4.1.6296.101.99.1.2.6	Bits	read-write	Description.
BIT sleDebugControlIgmpStatus	1.3.6.1.4.1.6296.101.99.1.2.7	Bits	read-write	Description.
BIT sleDebugControlIgmpSnoopStatus	1.3.6.1.4.1.6296.101.99.1.2.8	Bits	read-write	Description.
BIT sleDebugControlNsmStatus	1.3.6.1.4.1.6296.101.99.1.2.9	Bits	read-write	Description.
BIT sleDebugControlNsmMcastStatus	1.3.6.1.4.1.6296.101.99.1.2.10	Bits	read-write	Description.
BIT sleDebugControlBgpStatus	1.3.6.1.4.1.6296.101.99.1.2.11	Bits	read-write	Description.
BIT sleDebugControlOspfStatus	1.3.6.1.4.1.6296.101.99.1.2.12	Bits	read-write	Description.
BIT sleDebugControlPimStatus	1.3.6.1.4.1.6296.101.99.1.2.13	Bits	read-write	Description.
BIT sleDebugControlRipStatus	1.3.6.1.4.1.6296.101.99.1.2.14	Bits	read-write	Description.
sleDebugStatusNotification	1.3.6.1.4.1.6296.101.99.1.3
NTF sleDebugDhcpStatusChanged	1.3.6.1.4.1.6296.101.99.1.3.1			Description.
NTF sleDebugIgmpStatusChanged	1.3.6.1.4.1.6296.101.99.1.3.2			Description.
NTF sleDebugIgmpSnoopStatusChanged	1.3.6.1.4.1.6296.101.99.1.3.3			Description.
NTF sleDebugNsmStatusChanged	1.3.6.1.4.1.6296.101.99.1.3.4			Description.
NTF sleDebugNsmMcastStatusChanged	1.3.6.1.4.1.6296.101.99.1.3.5			Description.
NTF sleDebugBgpStatusChanged	1.3.6.1.4.1.6296.101.99.1.3.6			Description.
NTF sleDebugOspfStatusChanged	1.3.6.1.4.1.6296.101.99.1.3.7			Description.
NTF sleDebugPimStatusChanged	1.3.6.1.4.1.6296.101.99.1.3.8			Description.
NTF sleDebugRipStatusChanged	1.3.6.1.4.1.6296.101.99.1.3.9			Description.
sleDebugGroup	1.3.6.1.4.1.6296.101.99.2			Description.
sleDebugNotificationGroup	1.3.6.1.4.1.6296.101.99.3			Description.

RFC description

MIB for monitoring and controlling debug functionality in Secure Logging Extension implementations.

Start monitoring DASAN Networks SLE-series OLT (GPON/EPON access node) (RMON debug/diagnostic logging controls) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SLE-DEBUG-MIB

What Is SLE-DEBUG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description