Description: Command to configure global system parameters. It must be the last member in the varBindList of the SNMP set request. The parameters for different commands are listed below: setIgmpParameters: (optional, but at least one of them should be there) sheIgmpControlProgramPreviewEnable sheIgmpControlLogEnable sheIgmpControlUploadEnable setFtpParameters: sheIgmpControlFtpRootDir sheIgmpControlFtpIp sheIgmpControlFtpUser sheIgmpControlFtpPassword sheIgmpControlFtpUploadInterval setIgmpPacketRateLimitUplink: sheIgmpControlPacketRateLimitUplink setIgmpPacketRateLimitSubscriber: sheIgmpControlPacketRateLimitSubscriber setIgmpLongTimeOnlineTime: sheIgmpControlLongTimeOnlineTime setIgmpEthernetAccessEnable: sheIgmpControlEthernetAccessEnable resetSubscriberPreviewCountAll: manuallyUploadLog: (no parameter)

Notifications: sheIgmpControlResult at the command ending in case of long running command. The long running command refers to the case that sheIgmpUploadEnable is changed from disable to enable. NE will verify the FTP connection at the enabling moment. Besides, the RootDir is created if they do not exist yet. EM should GET sheIgmpControlReqResult when the Response of the SET PDU is received, and the error status is noError. If the value of sheIgmpControlReqResult is comExecStarted(30), which means the SET operation is a long running command, EM must issue another GET operation on sheIgmpControlTimer. A timer should start on EM with the expire time equals to the value of sheIgmpControlTimer. The sheIgmpControlResult trap is expected to reach EM within the specified time. When the trap is received by EM, EM can optionally GET sheIgmpControlReqResult, sheIgmpControlStatus, and sheIgmpControlTimeStamp.