SENSATRONICS-EM1

All MIBs › SENSATRONICS-EM1

Organization: Sensatronics LLC

Last Updated: 2004-09-13

Category: Data Center Infrastructure Monitoring, Environmental and Power Monitoring

Description: Monitors Sensatronics EM1 multi-sensor environmental monitor temperature, humidity, and contact inputs.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SENSATRONICS-EM1?

SENSATRONICS-EM1 is a Sensatronics proprietary MIB for the EM1 environmental monitor appliance. Its objects cover unit name/model/manufacturer/web address/firmware version and release date/serial number/configuration, network mode/IP/netmask/gateway/HTTP port, unit mode, manager IP, and per-sensor-group readings (name, temperature, humidity, and wetness — each as both a display string and a raw integer value). As a hardware-status MIB it lets a facilities team monitor equipment-room temperature, humidity, and water/leak detection from a single environmental sensor unit. It is deployed on the Sensatronics EM1 environmental monitor appliance. Engineers can download the SENSATRONICS-EM1 file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SENSATRONICS-EM1. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Sensatronics EM1 environmental monitor appliance

Monitoring Examples

A facilities team monitors group1WetDataInt to get an immediate leak-detection alert from a Sensatronics EM1 unit installed near sensitive network equipment.

What Can Be Monitored

temperature, humidity, and water/leak sensor readings

Imported Objects

From SENSATRONICS-SMI

envMonitors

OBJECT-IDENTITY

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
productEM1	1.3.6.1.4.1.16174.1.1.3			Description of EM1 code.
unitInfo	1.3.6.1.4.1.16174.1.1.3.1
STR unitName	1.3.6.1.4.1.16174.1.1.3.1.1	DisplayString	read-write	A user-definable unit name for the module being managed.
STR unitModel	1.3.6.1.4.1.16174.1.1.3.1.2	DisplayString	read-only	The model number of the module being managed.
STR unitManufacturer	1.3.6.1.4.1.16174.1.1.3.1.3	DisplayString	read-only	Company name of unit producer.
STR unitWeb	1.3.6.1.4.1.16174.1.1.3.1.4	DisplayString	read-only	Website of manufacturer
STR unitFirmware	1.3.6.1.4.1.16174.1.1.3.1.5	DisplayString	read-only	Firmware revision of unit.
STR unitFWReleaseDate	1.3.6.1.4.1.16174.1.1.3.1.6	DisplayString	read-only	Release date of unit firmware.
STR unitSerial	1.3.6.1.4.1.16174.1.1.3.1.7	DisplayString	read-only	Serial number of unit being managed.
INT unitConfig	1.3.6.1.4.1.16174.1.1.3.1.8	INTEGER	read-only	In-house configuration MIB - do not use.
configData	1.3.6.1.4.1.16174.1.1.3.2
netInfo	1.3.6.1.4.1.16174.1.1.3.2.1
INT netMode	1.3.6.1.4.1.16174.1.1.3.2.1.1	INTEGER	read-only	1 if the unit is self-configuring via DHCP, 0 if static IP assigned.
STR netIP	1.3.6.1.4.1.16174.1.1.3.2.1.2	DisplayString	read-only	IP address of unit being managed.
STR netNM	1.3.6.1.4.1.16174.1.1.3.2.1.3	DisplayString	read-only	Netmask of unit being managed.
STR netGW	1.3.6.1.4.1.16174.1.1.3.2.1.4	DisplayString	read-only	Gateway of unit being managed.
INT netHTTPPort	1.3.6.1.4.1.16174.1.1.3.2.1.5	INTEGER	read-write	Port the unit webserver listens on
trapConfig	1.3.6.1.4.1.16174.1.1.3.2.2
managerConfig	1.3.6.1.4.1.16174.1.1.3.2.2.1
STR managerIP	1.3.6.1.4.1.16174.1.1.3.2.2.1.1	DisplayString	read-write	IP of trap manager.
measurementSystem	1.3.6.1.4.1.16174.1.1.3.2.3
STR unitMode	1.3.6.1.4.1.16174.1.1.3.2.3.1	DisplayString	read-write	Set to C for Celsius units in probe data, F for Fahrenheit, K for Kelvin, R for Rankine, other values disallowed.
sensorInfo	1.3.6.1.4.1.16174.1.1.3.3
group1	1.3.6.1.4.1.16174.1.1.3.3.1
STR group1Name	1.3.6.1.4.1.16174.1.1.3.3.1.1	DisplayString	read-write	Name of group 1 - User configurable, 16 characters
STR group1TempName	1.3.6.1.4.1.16174.1.1.3.3.1.2	DisplayString	read-write	Name of Temperature probe in group 1 - User configurable, 16 characters
STR group1TempDataStr	1.3.6.1.4.1.16174.1.1.3.3.1.3	DisplayString	read-write	Data from Temperature probe in group 1, string format, to 1 decimal place
INT group1TempDataInt	1.3.6.1.4.1.16174.1.1.3.3.1.4	INTEGER	read-write	Data from Temperature probe in group 1, integer format, no decimal places
STR group1HumidName	1.3.6.1.4.1.16174.1.1.3.3.1.5	DisplayString	read-write	Name of Humidity probe in group 1 - User configurable, 16 characters
STR group1HumidDataStr	1.3.6.1.4.1.16174.1.1.3.3.1.6	DisplayString	read-write	Data from Humidity probe in group 1, string format, to 1 decimal place
INT group1HumidDataInt	1.3.6.1.4.1.16174.1.1.3.3.1.7	INTEGER	read-write	Data from Humidity probe in group 1, integer format, no decimal places
STR group1WetName	1.3.6.1.4.1.16174.1.1.3.3.1.8	DisplayString	read-write	Name of Wetness probe in group 1 - User configurable, 16 characters
STR group1WetDataStr	1.3.6.1.4.1.16174.1.1.3.3.1.9	DisplayString	read-write	Data from Wetness probe in group 1, string format, to 1 decimal place
INT group1WetDataInt	1.3.6.1.4.1.16174.1.1.3.3.1.10	INTEGER	read-write	Data from Wetness probe in group 1, integer format, no decimal places
group2	1.3.6.1.4.1.16174.1.1.3.3.2
STR group2Name	1.3.6.1.4.1.16174.1.1.3.3.2.1	DisplayString	read-write	Name of group 2 - User configurable, 16 characters
STR group2TempName	1.3.6.1.4.1.16174.1.1.3.3.2.2	DisplayString	read-write	Name of Temperature probe in group 2 - User configurable, 16 characters
STR group2TempDataStr	1.3.6.1.4.1.16174.1.1.3.3.2.3	DisplayString	read-write	Data from Temperature probe in group 2, string format, to 1 decimal place
INT group2TempDataInt	1.3.6.1.4.1.16174.1.1.3.3.2.4	INTEGER	read-write	Data from Temperature probe in group 2, integer format, no decimal places
STR group2HumidName	1.3.6.1.4.1.16174.1.1.3.3.2.5	DisplayString	read-write	Name of Humidity probe in group 2 - User configurable, 16 characters
STR group2HumidDataStr	1.3.6.1.4.1.16174.1.1.3.3.2.6	DisplayString	read-write	Data from Humidity probe in group 2, string format, to 1 decimal place
INT group2HumidDataInt	1.3.6.1.4.1.16174.1.1.3.3.2.7	INTEGER	read-write	Data from Humidity probe in group 2, integer format, no decimal places
STR group2WetName	1.3.6.1.4.1.16174.1.1.3.3.2.8	DisplayString	read-write	Name of Wetness probe in group 2 - User configurable, 16 characters
STR group2WetDataStr	1.3.6.1.4.1.16174.1.1.3.3.2.9	DisplayString	read-write	Data from Wetness probe in group 2, string format, to 1 decimal place
INT group2WetDataInt	1.3.6.1.4.1.16174.1.1.3.3.2.10	INTEGER	read-write	Data from Wetness probe in group 2, integer format, no decimal places
group3	1.3.6.1.4.1.16174.1.1.3.3.3
STR group3Name	1.3.6.1.4.1.16174.1.1.3.3.3.1	DisplayString	read-write	Name of group 3 - User configurable, 16 characters
STR group3TempName	1.3.6.1.4.1.16174.1.1.3.3.3.2	DisplayString	read-write	Name of Temperature probe in group 3 - User configurable, 16 characters
STR group3TempDataStr	1.3.6.1.4.1.16174.1.1.3.3.3.3	DisplayString	read-write	Data from Temperature probe in group 3, string format, to 1 decimal place
INT group3TempDataInt	1.3.6.1.4.1.16174.1.1.3.3.3.4	INTEGER	read-write	Data from Temperature probe in group 3, integer format, no decimal places
STR group3HumidName	1.3.6.1.4.1.16174.1.1.3.3.3.5	DisplayString	read-write	Name of Humidity probe in group 3 - User configurable, 16 characters
STR group3HumidDataStr	1.3.6.1.4.1.16174.1.1.3.3.3.6	DisplayString	read-write	Data from Humidity probe in group 3, string format, to 1 decimal place
INT group3HumidDataInt	1.3.6.1.4.1.16174.1.1.3.3.3.7	INTEGER	read-write	Data from Humidity probe in group 3, integer format, no decimal places
STR group3WetName	1.3.6.1.4.1.16174.1.1.3.3.3.8	DisplayString	read-write	Name of Wetness probe in group 3 - User configurable, 16 characters
STR group3WetDataStr	1.3.6.1.4.1.16174.1.1.3.3.3.9	DisplayString	read-write	Data from Wetness probe in group 3, string format, to 1 decimal place
INT group3WetDataInt	1.3.6.1.4.1.16174.1.1.3.3.3.10	INTEGER	read-write	Data from Wetness probe in group 3, integer format, no decimal places
group4	1.3.6.1.4.1.16174.1.1.3.3.4
STR group4Name	1.3.6.1.4.1.16174.1.1.3.3.4.1	DisplayString	read-write	Name of group 4 - User configurable, 16 characters
STR group4TempName	1.3.6.1.4.1.16174.1.1.3.3.4.2	DisplayString	read-write	Name of Temperature probe in group 4 - User configurable, 16 characters
STR group4TempDataStr	1.3.6.1.4.1.16174.1.1.3.3.4.3	DisplayString	read-write	Data from Temperature probe in group 4, string format, to 1 decimal place
INT group4TempDataInt	1.3.6.1.4.1.16174.1.1.3.3.4.4	INTEGER	read-write	Data from Temperature probe in group 4, integer format, no decimal places
STR group4HumidName	1.3.6.1.4.1.16174.1.1.3.3.4.5	DisplayString	read-write	Name of Humidity probe in group 4 - User configurable, 16 characters
STR group4HumidDataStr	1.3.6.1.4.1.16174.1.1.3.3.4.6	DisplayString	read-write	Data from Humidity probe in group 4, string format, to 1 decimal place
INT group4HumidDataInt	1.3.6.1.4.1.16174.1.1.3.3.4.7	INTEGER	read-write	Data from Humidity probe in group 4, integer format, no decimal places
STR group4WetName	1.3.6.1.4.1.16174.1.1.3.3.4.8	DisplayString	read-write	Name of Wetness probe in group 4 - User configurable, 16 characters
STR group4WetDataStr	1.3.6.1.4.1.16174.1.1.3.3.4.9	DisplayString	read-write	Data from Wetness probe in group 4, string format, to 1 decimal place
INT group4WetDataInt	1.3.6.1.4.1.16174.1.1.3.3.4.10	INTEGER	read-write	Data from Wetness probe in group 4, integer format, no decimal places

RFC description

Environmental monitoring MIB for Sensatronics EM1 temperature monitor units including sensor configuration and data.

Start monitoring Sensatronics EM1 environmental monitor appliance (temperature/humidity/wetness sensor readings) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SENSATRONICS-EM1

What Is SENSATRONICS-EM1?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description