SDEVICE-MIB

All MIBs › SDEVICE-MIB

Organization: Schleifenbauer Engineering

Last Updated: 2015-04-13

Category: Environmental and Power Monitoring, Intelligent PDU Management

Description: Manages Schleifenbauer smart device configuration, sensor readings, and outlet control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SDEVICE-MIB?

SDEVICE-MIB is a Schleifenbauer Engineering (enterprise OID 31034, intelligent PDU vendor) proprietary MIB describing the Schleifenbauer device family. Its objects cover SPDM/firmware version, build number, sales-order number, product ID, serial number, hardware/MAC/unit address, device name/location, a vanity tag, phase/outlet/switched-outlet/measured-outlet/sensor counts, max load, a device status code, and temperature/input-current/output-current/input-voltage alert flags with current-drop alerts. As a status/performance MIB it lets an administrator confirm power capacity and watch for over-current/over-temperature alerts on a Schleifenbauer intelligent PDU. It is deployed on Schleifenbauer Engineering intelligent PDUs. Engineers can download the SDEVICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SDEVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Schleifenbauer Engineering intelligent PDUs

Monitoring Examples

An administrator monitors inputCurrentAlert and temperatureAlert to catch an overloaded or overheating Schleifenbauer intelligent PDU.

What Can Be Monitored

power/current/temperature alert status

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
DEC actualCurrentI	1.3.6.1.4.1.31034.2.8.1.5	DeciAmps	read-only	Actual apparent, RMS current.
DEC actualCurrentO	1.3.6.1.4.1.31034.2.10.1.5	DeciAmps	read-only	Actual apparent, RMS current.
DEC actualVoltageI	1.3.6.1.4.1.31034.2.8.1.7	DeciVolts	read-only	The actual voltage.
DEC actualVoltageO	1.3.6.1.4.1.31034.2.10.1.7	DeciVolts	read-only	Actual voltage on output.
STR buildNumber	1.3.6.1.4.1.31034.2.3.3	DisplayString	read-only	Date and time of latest build of the firmware.
I32 channelIndex4	1.3.6.1.4.1.31034.2.9.1.1	Integer32	not-accessible	The channel. Its value ranges between 1 and 48, depending on the number of channels, usually 1.
I32 channelIndex5	1.3.6.1.4.1.31034.2.11.1.1	Integer32	not-accessible	The channel. Its value ranges between 1 and 48, depending on the number of channels, usually 1.
I32 channelIndex6	1.3.6.1.4.1.31034.2.8.1.1	Integer32	not-accessible	The channel. Its value ranges between 1 and 48, depending on the number of channels, usually 1.
I32 channelIndex7	1.3.6.1.4.1.31034.2.10.1.1	Integer32	not-accessible	The channel. Its value ranges between 1 and 48, depending on the number of channels, usually 1.
I32 channelIndex8	1.3.6.1.4.1.31034.2.12.1.1	Integer32	not-accessible	The channel. Its value ranges between 1 and 48, depending on the number of channels, usually 1.
compliance	1.3.6.1.4.1.31034.99.1.1			The requirements for conformance to the SPGW-MIB.
compliances	1.3.6.1.4.1.31034.99.1
configuration	1.3.6.1.4.1.31034.2.4
configurationGroup	1.3.6.1.4.1.31034.99.2.2			A collection of objects providing configuration information about the device.
I32 currentDropDetection	1.3.6.1.4.1.31034.2.7.1.11	Integer32	read-write	Enables the current drop detection function. 0 = always off (default), 1 = input (s) only, 2 = output(s) only, 3 = both inputs and outputs.
I32 currentState	1.3.6.1.4.1.31034.2.11.1.2	Integer32	read-write	The actual state of the outlet relays. The hardware will contain max 48 outlets. Writing is only effective after setting [swounl].
device0	1.3.6.1.4.1.31034.2
STR deviceLocation	1.3.6.1.4.1.31034.2.3.11	DisplayString	read-write	User configurable device location identifier.
STR deviceName	1.3.6.1.4.1.31034.2.3.10	DisplayString	read-write	User configurable device name or identifier.
I32 deviceStatusCode	1.3.6.1.4.1.31034.2.5.1	Integer32	read-only	Returns an internal status or error code. 0 = OK, 16 = watchdog timer caused reset, 128 = slave module was reset, 144 = both previous.
I32 displayOrientation	1.3.6.1.4.1.31034.2.7.1.9	Integer32	read-write	0 no display; display off; 1 vertical, display on top; 2 vertical, upside down; 3 horizontal, display at left; 4 horizontal, display at right
I32 firmwareVersion	1.3.6.1.4.1.31034.2.3.2	Integer32	read-only	The units firmware revision number.
MIL fixedOutletDelay	1.3.6.1.4.1.31034.2.7.1.5	MilliSeconds	read-write	Minimal delay between two successive relay switches in milliseconds. Minimal delay is 100 ms. Will always be respected!
general	1.3.6.1.4.1.31034.2.7.1
groups	1.3.6.1.4.1.31034.99.2
STR hardwareAddress	1.3.6.1.4.1.31034.2.3.7	DisplayString	read-only	Hardware serial number; cannot be changed. Can be used as backup unit address. format as 3 unsigned ints separated by dashes: int - int - int
I32 iCurrentDropAlert	1.3.6.1.4.1.31034.2.5.7	Integer32	read-only	An alert has been raised due to the current of a measured input suddenly dropping to near zero, possibly indicating a blown fuse; 0=no alert; 1-3 for phase.
identification	1.3.6.1.4.1.31034.2.3
identificationGroup	1.3.6.1.4.1.31034.99.2.1			A collection of objects providing identification information about the device.
SEC individualOutletDelay	1.3.6.1.4.1.31034.2.11.1.5	Seconds	read-write	Delay before an individual outlet switches on at power-up in Seconds.
I32 inputCTratio	1.3.6.1.4.1.31034.2.8.1.12	Integer32	read-write	The multiplier to use in case of use of /5 current transformers. Defaults to 1.
I32 inputCurrentAlert	1.3.6.1.4.1.31034.2.5.3	Integer32	read-only	An alert has been raised due to current exceeding treshhold; 0=no alert; 1-3 for input phase.
inputmeasuresEntry	1.3.6.1.4.1.31034.2.8.1		not-accessible	The record containing the registers for the channel selected by channelIndex.
inputMeasuresGroup	1.3.6.1.4.1.31034.99.2.7			A collection of objects providing the actual input measurements of the device.
inputmeasuresTable	1.3.6.1.4.1.31034.2.8		not-accessible	This table contains all measures related to the measured inputs of the DEVICE. Note: either 1 or 3 channels, depending on number of phases measured.
STR inputName	1.3.6.1.4.1.31034.2.8.1.13	DisplayString	read-write	User configurable naming of inputs or phases. Useful if channels are used to measure branches..
I32 inputVoltageAlert	1.3.6.1.4.1.31034.2.5.5	Integer32	read-only	An alert has been raised due to a voltage dip; 0=no alert; 1-3 for input phase.
KIL kWhSubtotalI	1.3.6.1.4.1.31034.2.8.1.3	KiloWattHour	read-only	kWh subtotal register of the only phase in a single phase measurement; or one of three phases in a multiphase measurement. Reset to zero with [rsimks].
KIL kWhSubtotalO	1.3.6.1.4.1.31034.2.10.1.3	KiloWattHour	read-only	kWh subtotal register of selected output. Reset to zero with [rsomks].
KIL kWhTotalI	1.3.6.1.4.1.31034.2.8.1.2	KiloWattHour	read-only	Either the only phase in a single phase measurement; or one of the three phases in a multiphase measurement.
KIL kWhTotalO	1.3.6.1.4.1.31034.2.10.1.2	KiloWattHour	read-only	Total kWh of selected output.
I32 localAlertReset	1.3.6.1.4.1.31034.2.7.1.10	Integer32	read-write	Allow alerts to be reset locally on device by pushing one of the buttons. [replaces dipDuration]
STR macAddress	1.3.6.1.4.1.31034.2.3.8	DisplayString	read-only	The ethernet interfaces unique hardware address.
I32 maximumLoad	1.3.6.1.4.1.31034.2.4.6	Integer32	read-only	Maximum rated load of device per phase, usually either 16 or 32 A.
I32 maximumTemperature	1.3.6.1.4.1.31034.2.7.1.8	Integer32	read-write	An alert should be generated whenever the temperature of the first connected T sensor is above this value. Zero means disabled.
DEC maxInletAmps	1.3.6.1.4.1.31034.2.8.1.11	DeciAmps	read-write	Maximum current per input phase in A; should last at least [stpkdr] MilliSeconds before triggering an alert.
DEC maxOutletAmps	1.3.6.1.4.1.31034.2.10.1.8	DeciAmps	read-write	Maximum current per outlet in A; should last at least [stpkdr] MilliSeconds before triggering an alert.
DEC minVoltageI	1.3.6.1.4.1.31034.2.8.1.8	DeciVolts	read-only	RMS voltage dip; lowest value since reset of alerts.
I32 noMeasuredOutlets	1.3.6.1.4.1.31034.2.4.4	Integer32	read-only	Number of measured outlets. If outlet numbering is non-contiguous: the highest outlet number.
I32 noOutletsTotal	1.3.6.1.4.1.31034.2.4.2	Integer32	read-only	Total number of outlets, even hardwired without switch/measure modules.
I32 noPhases	1.3.6.1.4.1.31034.2.4.1	Integer32	read-only	Either zero, one or three for no input metering, single or three phase system
I32 noSensors	1.3.6.1.4.1.31034.2.4.5	Integer32	read-only	The number of external, digital environmental sensors: 0 for none, 1 to 16 depending on number of reported sensors
I32 noSwitchedOutlets	1.3.6.1.4.1.31034.2.4.3	Integer32	read-only	Number of switched outlets. If outlet numbering is non-contiguous: the highest outlet number.
I32 oCurrentDropAlert	1.3.6.1.4.1.31034.2.5.6	Integer32	read-only	An alert has been raised due to the current of a measured outlet suddenly dropping to near zero, possibly indicating a blown fuse; 0=no alert; 1-48 for outlet.
STR outletName	1.3.6.1.4.1.31034.2.9.1.2	DisplayString	read-only	User configurable naming of individual outlets. Useful to distinguish outlets based on customer or device name.
I32 outletPowerupMode	1.3.6.1.4.1.31034.2.7.1.7	Integer32	read-write	Behaviour of outlet on power-up: 0=off; 1=same state as at power down; 2=same state, but delayed by individual delay timer.
outletsEntry	1.3.6.1.4.1.31034.2.9.1		not-accessible	The record containing the registers forthe channel selected by channelIndex.
outletsTable	1.3.6.1.4.1.31034.2.9		not-accessible	This table contains the customer specific settings, determining toutlestablehe behaviour of the DEVICE.
I32 outputCTratio	1.3.6.1.4.1.31034.2.10.1.9	Integer32	read-write	The multiplier to use in case of use of /5 current transformers. Defaults to 1.
I32 outputCurrentAlert	1.3.6.1.4.1.31034.2.5.4	Integer32	read-only	An alert has been raised due to current exceeding treshhold; 0=no alert; 1-48 for outlet.
outputmeasuresEntry	1.3.6.1.4.1.31034.2.10.1		not-accessible	The record containing the registers for the channel selected by channelIndex.
outputMeasuresGroup	1.3.6.1.4.1.31034.99.2.8			A collection of objects providing the actual output measurements of the device.
outputmeasuresTable	1.3.6.1.4.1.31034.2.10		not-accessible	This table contains all measures related to the measured outputs of the DEVICE. Note: up to 48 channels, depending on number of measured outlets.
DEC peakCurrentI	1.3.6.1.4.1.31034.2.8.1.6	DeciAmps	read-only	Peak apparent, RMS current; highest value since last reset of the alerts.
DEC peakCurrentO	1.3.6.1.4.1.31034.2.10.1.6	DeciAmps	read-only	Peak apparent, RMS current; highest value since last reset of alerts.
MIL peakDuration	1.3.6.1.4.1.31034.2.7.1.4	MilliSeconds	read-write	A current peak should last at least [stpkdr] MilliSeconds before an alert is raised; max about a minute.
DEC powerFactorI	1.3.6.1.4.1.31034.2.8.1.4	DeciPowerFactor	read-only	The effective power factor in percent.
DEC powerFactorO	1.3.6.1.4.1.31034.2.10.1.4	DeciPowerFactor	read-only	Power factor of output.
SEC powerSaverMode	1.3.6.1.4.1.31034.2.7.1.6	Seconds	read-write	Set backlight on time in seconds; 0 keeps display always on. Note that keeping the backlight on may decrease luminosity over time. Setting this to other values than 10, 60, 120 or 240 is incompatible with the gateway!
I32 powerVAI	1.3.6.1.4.1.31034.2.8.1.9	Integer32	read-only	Power value calculated, not in data model of device.
I32 powerWattI	1.3.6.1.4.1.31034.2.8.1.10	Integer32	read-only	Power value calculated by the gateway, not in data model of device.
STR productId	1.3.6.1.4.1.31034.2.3.5	DisplayString	read-only	SP product id.
I32 rebootDevice	1.3.6.1.4.1.31034.2.6.1	Integer32	read-write	Warm reboot/reset of device; note: this will have no effect on outlet status!
reset	1.3.6.1.4.1.31034.2.6
I32 resetAlerts	1.3.6.1.4.1.31034.2.6.2	Integer32	read-write	Reset all alert signals.
resetGroup	1.3.6.1.4.1.31034.99.2.4			Groups resettable attributes op the device.
I32 resetPeakValues	1.3.6.1.4.1.31034.2.6.5	Integer32	read-write	Reset all peak values to zero, as well input as output metering, voltages dips, current peaks and temperatures.
STR salesOrderNumber	1.3.6.1.4.1.31034.2.3.4	DisplayString	read-only	SP sales order number.
I32 scheduled	1.3.6.1.4.1.31034.2.11.1.3	Integer32	read-only	A one indicates pending activity; the switch delay has not yet expired.
schleifenbauer	1.3.6.1.4.1.31034			This MIB describes the functions of the Schleifenbauer device family.
sensorEntry	1.3.6.1.4.1.31034.2.12.1		not-accessible	The record containing the registers for the channel selected by channelIndex.
STR sensorName	1.3.6.1.4.1.31034.2.12.1.4	DisplayString	read-write	User definable name for sensors.
sensorsGroup	1.3.6.1.4.1.31034.99.2.9			A collection of objects providing the actual environmental measurements of the device.
sensorTable	1.3.6.1.4.1.31034.2.12		not-accessible	This table contains the environmental measurements. As well internal temperature as external temperature probes.
STR sensorType	1.3.6.1.4.1.31034.2.12.1.2	DisplayString	read-only	Type of connected sensor, either T, H or I for respectively Temperature (C), Humidity (%) or dry switch contact
DEC sensorValue	1.3.6.1.4.1.31034.2.12.1.3	DeciValue	read-only	Value of connected sensor
STR serialNumber	1.3.6.1.4.1.31034.2.3.6	DisplayString	read-only	SP serial number.
settings	1.3.6.1.4.1.31034.2.7
settingsGroup	1.3.6.1.4.1.31034.99.2.5			A collection of objects providing the actual settings about the device.
I32 spdmVersion	1.3.6.1.4.1.31034.2.3.1	Integer32	read-only	Data model version, currently 1.10
switchedoutletsEntry	1.3.6.1.4.1.31034.2.11.1		not-accessible	The record containing the registers for the channel selected by channelIndex.
switchedOutletsGroup	1.3.6.1.4.1.31034.99.2.6			A collection of objects providing the actual outlet status of the device.
switchedoutletsTable	1.3.6.1.4.1.31034.2.11		not-accessible	This table contains the current status of switchable DEVICE's.
systemstatus	1.3.6.1.4.1.31034.2.5
systemStatusGroup	1.3.6.1.4.1.31034.99.2.3			A collection of objects providing status information about the device.
I32 temperatureAlert	1.3.6.1.4.1.31034.2.5.2	Integer32	read-only	An alert has been raised due to temperature exceeding treshhold; 0= no alert; 1= internal unit temp, 2= external sensor.
I32 unitAddress	1.3.6.1.4.1.31034.2.3.9	Integer32	read-write	User defined address; this will be used for addressing the unit.
I32 unlock	1.3.6.1.4.1.31034.2.11.1.4	Integer32	read-write	Setting the value to one will release the safety for this outlet for a couple seconds; switching and rebooting are then temporarily enabled.
STR vanityTag	1.3.6.1.4.1.31034.2.3.12	DisplayString	read-write	Characters to be displayed as vanity tekst in display.
I32 wirelessDisplayPower	1.3.6.1.4.1.31034.2.7.1.12	Integer32	read-write	Controls the transit power of the wireless display transciever (if installed). Set to zero to completely disable the module.
I32 zeroInputKWhSubtotal	1.3.6.1.4.1.31034.2.6.3	Integer32	read-write	Reset of input kWh subtotal counters to zero.
I32 zeroOutKWhSubtotal	1.3.6.1.4.1.31034.2.6.4	Integer32	read-write	Reset of outlet kWh subtotal counter to zero.

RFC description

Schleifenbauer power distribution unit (PDU) management including outlets, current, temperature, and environmental sensors.

Start monitoring Schleifenbauer Engineering intelligent PDUs (power capacity/temperature/current alerts) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SDEVICE-MIB

What Is SDEVICE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description