| OID symbolic | OID numeric | Type | Access | Description |
|---|
| scspAtmarpMIB | 1.3.6.1.3.2002 | | | This module defines a portion of the management
information base (MIB) for managing Server Cache
Synchronizatio protocol applied to ATMARP servers. |
| scspAtmarpObjects | 1.3.6.1.3.2002.1 | | | |
| scspAtmarpServerGroupTable | 1.3.6.1.3.2002.1.1 | | not-accessible | The objects defined in this table are used to for the
management of SCSP server groups with application to
IP over ATM operation (Classic IP). These objects SHOULD
be used along with the protocol independent part objects
to support the management of the SCSP protocol applied
to synchronizing the atmarp servers in a LIS.
There is one entry in this table for each server group.
In the case of IP over ATM, each server group corresponds to
a Logical IP Subnet. |
| scspAtmarpServerGroupEntry | 1.3.6.1.3.2002.1.1.1 | | not-accessible | Information about SCSP server group running IP over ATM
operation. This table is indexed by scspServerGroupID and
scspServerGroupPID. The two indeces point to a corresponding
entry in the scspServerGroupTable. |
| IP scspAtmarpServerGroupNetMask | 1.3.6.1.3.2002.1.1.1.1 | IpAddress | read-only | The subnet mask associated with this Server Group. |
| IP scspAtmarpServerGroupSubnetAddr | 1.3.6.1.3.2002.1.1.1.2 | IpAddress | read-only | The IP subnet address associated with this Server Group. |
| ROW scspAtmarpServerGroupRowStatus | 1.3.6.1.3.2002.1.1.1.3 | RowStatus | read-create | This object allows Atmarp Server Group Table entries to be
created and deleted from the scspAtmarpServerGroupTable. Note
that scspAtmarpServerGroupTable entry creation and deletion
is coupled with scspServerGroupTable entry creation and
deletion. A scspAtmarpServerGroupTable entry cannot be
created until its corresponding scspServerGroupTable entry
is created. When a scspServerGroupTable entry is deleted,
it also removes the corresponding scspAtmarpServerGroupTable
entry. |
| scspAtmarpLSTable | 1.3.6.1.3.2002.1.2 | | not-accessible | The objects defined in this table are used to for the
management of the Atmarp Local server in a SCSP server group
for IP over ATM operation. These objects SHOULD
be used along with the protocol independent part objects
to support the management of the SCSP protocol applied
to synchronizing the IP over ATM servers. |
| scspAtmarpLSEntry | 1.3.6.1.3.2002.1.2.1 | | not-accessible | Information about Atmarp Local Server in a SCSP server
group. This table is indexed by scspServerGroupID,
scspServerGroupPID, and scspLSID. The three indeces point
to a corresponding entry in the scspLSTable. |
| IP scspAtmarpLSLSIPAddr | 1.3.6.1.3.2002.1.2.1.1 | IpAddress | read-only | The IP address of the Atmarp Local Server. Since an Atmarp
server does not have to be assigned an IP address, this
object is optional. |
| ATM scspAtmarpLSLSAtmAddr | 1.3.6.1.3.2002.1.2.1.2 | AtmAddr | read-only | The ATM address of the Atmarp Local Server. |
| ROW scspAtmarpLSRowStatus | 1.3.6.1.3.2002.1.2.1.3 | RowStatus | read-create | This object allows Atmarp Local Server Table entries to be
created and deleted from the scspAtmarpLSTable. Note
that scspAtmarpLSTable entry creation and deletion
is coupled with scspLSTable entry creation and deletion.
A scspAtmarpLSTable entry cannot be created until
its corresponding scspLSTable entry is created.
When a scspLSTable entry is deleted, it also removes
the corresponding scspAtmarpLSTable entry. |
| scspAtmarpPeerTable | 1.3.6.1.3.2002.1.3 | | not-accessible | The objects defined in this table are used to for the
management of the ATMARP sever peers. |
| scspAtmarpPeerEntry | 1.3.6.1.3.2002.1.3.1 | | not-accessible | Information about each peer ATMARP server participated
in the scsp Server group. The table is indexed by
scspServerGroupID, scspServerGroupPID, and
scspAtmarpPeerIndex. |
| I32 scspAtmarpPeerIndex | 1.3.6.1.3.2002.1.3.1.1 | Integer32 | read-only | The table index of the peer Atmarp server table. |
| IP scspAtmarpPeerIPAddr | 1.3.6.1.3.2002.1.3.1.2 | IpAddress | read-only | The IP address of the peer Atmarp server. Since an Atmarp
server does not have to be assigned an IP address,
this object is optional. |
| ATM scspAtmarpPeerAtmAddr | 1.3.6.1.3.2002.1.3.1.3 | AtmAddr | read-only | The ATM address of the Peer. If SVC is used between LS and
Peer, Peer's ATM address should be valid. However, if PVC is
used instead SVC, the Peer's ATM address may be a Null OCTET
STRING. |
| ATM scspAtmarpPeerVCType | 1.3.6.1.3.2002.1.3.1.4 | AtmConnKind | read-only | The type of the virtual circuit between LS and Peer. |
| NUM scspAtmarpPeerVPI | 1.3.6.1.3.2002.1.3.1.5 | SCSPVPIInteger | read-only | The VPI value for the virtual circuit between LS and Peer. |
| NUM scspAtmarpPeerVCI | 1.3.6.1.3.2002.1.3.1.6 | SCSPVCIInteger | read-only | The VCI value for the virtual circuit between LS and Peer. |
| OCT scspAtmarpPeerDCSID | 1.3.6.1.3.2002.1.3.1.7 | OCTET STRING | read-only | The DCS ID for this peer. When the peer tabel is created,
DCS ID may not have been discovered. Tt is set to a
Null string. It will be update when the DCS ID
associated with this peer (ATM address) is discovered. |
| ROW scspAtmarpPeerRowStatus | 1.3.6.1.3.2002.1.3.1.8 | RowStatus | read-create | This object allows Atmarp Peer table entries to be created
and deleted from the scspAtmarpPeerTable. Note that
scspAtmarpPeerTable entry is created when a peer is
configured loaclly or when a peer not previously
configured connects to LS. |
| scspAtmarpHFSMTable | 1.3.6.1.3.2002.1.4 | | not-accessible | The objects defined in this table are used to for the
management of the HFSM between the LS and the DCS. |
| scspAtmarpHFSMEntry | 1.3.6.1.3.2002.1.4.1 | | not-accessible | Information about SCSP HFSM session between the LS and
its HFSMs. The table is indexed by
scspServerGroupID, scspServerGroupPID, and
scspAtmarpPeerIndex. |
| SCS scspHFSMHFSMState | 1.3.6.1.3.2002.1.4.1.1 | ScspHFSMStateType | read-only | The current state of the Hello Finite State Machine.
The allowable states are:
down(1),
waiting(2),
uniConn(3),
biConn(4). |
| C32 scspHFSMHelloIn | 1.3.6.1.3.2002.1.4.1.2 | Counter32 | read-only | The number of 'Hello' messages received from this HFSM. |
| C32 scspHFSMHelloOut | 1.3.6.1.3.2002.1.4.1.3 | Counter32 | read-only | The number of 'Hello' messages sent from LS to this
HFSM. |
| C32 scspHFSMHelloInvalidIn | 1.3.6.1.3.2002.1.4.1.4 | Counter32 | read-only | The number of invalid 'Hello' messages received from
this HFSM. Possible message errors include:
Hello message when the HFSM is in 'Down' state;
Hello message is too short to contain the number of
Receiver ID records specified in the header, etc.
Other common errors include failed authentication if
applicable, errors in the message fields, etc. |
| I32 scspHFSMHelloInterval | 1.3.6.1.3.2002.1.4.1.5 | Integer32 | read-create | This object contains the value for HelloInterval with
the associated HFSM. It is the time (in seconds)
between sending of consecutive Hello messages from the
HFSM. |
| I32 scspHFSMDeadFactor | 1.3.6.1.3.2002.1.4.1.6 | Integer32 | read-create | This object contains the value for DeadFactor with
this associated server. The DeadFactor along with
HelloInterval are contained in 'Hello' messages sent
from this HFSM. If 'Hello' messages are not received
from this HFSM within the time out interval
'HelloInterval*DeadFactor' (in seconds),
then the HFSM MUST be considered to be stalled. |
| I32 scspHFSMFamilyID | 1.3.6.1.3.2002.1.4.1.7 | Integer32 | read-only | The family ID is used to refer an aggregate of
Protocol ID/SGID pairs. Only a single HFSM is
run for all Protocol ID/SGID pairs assigned to
a Family ID. When the HFSM is not shared by an
aggregate of Protocol ID/SGID pairs, this
object should be set to 0. |
| ROW scspAtmarpHFSMRowStatus | 1.3.6.1.3.2002.1.4.1.8 | RowStatus | read-create | This object allows Atmarp HFSM table entries to be created
and deleted from the scspAtmarpHFSMTable. Note that
scspAtmarpHFSMTable entry creation and deletion is
closely coupled with scspHFSMTable entry creation.
A scspAtmarpHFSMTable entry cannot be created until
its corresponding scspHFSMTable entry is created.
When a scspHFSMTable entry is deleted, it also removes
the corresponding scspAtmarpHFSMTable entry. |
| scspAtmarpNotifications | 1.3.6.1.3.2002.2 | | | |
| NTF scspHFSMDown | 1.3.6.1.3.2002.2.1 | | | The Hello Finite State Machine associated with this
LS/DCS pair enters 'Down' state. |
| NTF scspHFSMWaiting | 1.3.6.1.3.2002.2.2 | | | The Hello Finite State Machine associated with
this LS/DCS pair enters 'Waiting' state. |
| NTF scspHFSMBiConn | 1.3.6.1.3.2002.2.3 | | | The Hello Finite State Machine associated with this
LS/DCS pair enters 'Bidirectional connection' state. |
| scspAtmarpConformance | 1.3.6.1.3.2002.3 | | | |
| scspAtmarpCompliances | 1.3.6.1.3.2002.3.1 | | | |
| scspAtmarpCompliance | 1.3.6.1.3.2002.3.1.1 | | | The compliance statement for entities that are required
for the management of SCSP when applied to ATMARP servers. |
| scspAtmarpGroups | 1.3.6.1.3.2002.3.2 | | | |
| scspAtmarpGroup | 1.3.6.1.3.2002.3.2.1 | | | This group is mandatory when Atmarp is the client/server
protocol running SCSP. |
