| OID symbolic | OID numeric | Type | Access | Description |
|---|
| scspMIB | 1.3.6.1.3.2001 | | | This module defines a portion of the management
information base (MIB) for managing Server Cache
Synchronization protocols entities. |
| scspObjects | 1.3.6.1.3.2001.1 | | | |
| scspServerGroupTable | 1.3.6.1.3.2001.1.1 | | not-accessible | The objects defined in this table are used to for the
management of server groups. There is one entry in this
table for each server group. |
| scspServerGroupEntry | 1.3.6.1.3.2001.1.1.1 | | not-accessible | Each entry contains attributes associated with a scsp
server group. |
| I32 scspServerGroupID | 1.3.6.1.3.2001.1.1.1.1 | Integer32 | not-accessible | This is the Group ID of this SCSP server group instance. |
| SCS scspServerGroupPID | 1.3.6.1.3.2001.1.1.1.2 | ScspPIDType | not-accessible | This is the protocol ID of this SCSP server group
instance. |
| ROW scspServerGroupRowStatus | 1.3.6.1.3.2001.1.1.1.3 | RowStatus | read-create | This object allows entries to be created and deleted
from the scspServerGroupTable. This table is closely
coupled with the scspLSTable, scspDCSTable, and the
corresponding protocol dependent tables. A new row
creation in this table results in creation of
corresponding entries in the scspLSTable and scspDCSTable.
In addition, entries in appropriate protocol dependent
table may also be added. When the scspServerRowStatus is
deleted by setting this object to destroy(6), this results
in removing corresponding entries in scspLSTable,
scspDCSTable, and those in corresponding protocol
dependent table. |
| scspLSTable | 1.3.6.1.3.2001.1.2 | | not-accessible | The objects defined in this table are for the
management of SCSP local server (LS). |
| scspLSEntry | 1.3.6.1.3.2001.1.2.1 | | not-accessible | Information about the Local Server in a SCSP group. Each
entry contains attributes associated a LS. |
| OCT scspLSID | 1.3.6.1.3.2001.1.2.1.1 | OCTET STRING | not-accessible | This is the Local Server ID of this Local Server. |
| I32 scspLSHelloInterval | 1.3.6.1.3.2001.1.2.1.2 | Integer32 | read-create | This object contains the value for HelloInterval for
the Local Server. It is the time (in seconds) between
sending of consecutive Hello messages from this server. |
| I32 scspLSDeadFactor | 1.3.6.1.3.2001.1.2.1.3 | Integer32 | read-create | This object contains the value for DeadFactor. The
DeadFactor along with HelloInterval are sent with
outgoing 'Hello' messages. If the DCS does not
received 'Hello' message from this LS within the
time out interval 'HelloInterval*DeadFactor'
(in seconds), then the DCS MUST consider the LS to
be stalled. |
| I32 scspLSCAReXmInterval | 1.3.6.1.3.2001.1.2.1.4 | Integer32 | read-create | The time out interval (in seconds) for re-sending CA
message to the DCS if no response is received. |
| I32 scspLSCSUSReXmtInterval | 1.3.6.1.3.2001.1.2.1.5 | Integer32 | read-create | The time out interval (in seconds) for re-sending
CSUS Request to the DCS if not all CSA Records
corresponding to the CSAS records in the CSUS
message have been received. |
| I32 scspLSCSUReXmtInterval | 1.3.6.1.3.2001.1.2.1.6 | Integer32 | read-create | The time out interval (in seconds) for re-sending CSU
Request to the DCS if not all CSA Records corresponding
to the CSU request have not been acknowledged. |
| I32 scspLSCSAMaxReXmt | 1.3.6.1.3.2001.1.2.1.7 | Integer32 | read-create | The maximum number of retransmission of a CSA record.
If acknowledge fails to occur when the maximum number
is reached, an 'abnormal event' has happened between
the LS/DCS link. |
| ROW scspLSRowStatus | 1.3.6.1.3.2001.1.2.1.8 | RowStatus | read-create | This object allows entries to be created and deleted
from the scspLSTable. This table is closely coupled
with DCS table and its corresponding protocol dependent
tables. A new row creation in this table results
in creation of new rows in the DCS table for each of
its configured DCSs (peer servers). In addition,
entries are created in the appropriate protocol
dependent tables. When the scspServerRowStatus is
deleted by setting this object to destroy(6), this
results in removing the corresponding entries in
the DCS table of the same Server Group. In addition,
entries in the corresponding protocol dependent table
will also be removed. |
| scspDCSTable | 1.3.6.1.3.2001.1.3 | | not-accessible | The objects defined in this table are used for the
management of the DCS session between the LS and DCS. |
| scspDCSEntry | 1.3.6.1.3.2001.1.3.1 | | not-accessible | Information about each DCS session between the LS and
its DCSs. The table is indexed by scspServerGroupID,
scspServerGroupPID, and scspDCSID. |
| OCT scspDCSID | 1.3.6.1.3.2001.1.3.1.1 | OCTET STRING | not-accessible | This ID is used to identify a directly connected
server(DCS). |
| SCS scspDCSCAFSMState | 1.3.6.1.3.2001.1.3.1.2 | ScspCAFSMStateType | read-only | The current state of the Cache Alignment Finite State
Machine. The allowable states are:
down(1),
msNego(2),
cacheSumm(3),
cacheUpdate(4),
aligned(5). |
| I32 scspDCSCASequence | 1.3.6.1.3.2001.1.3.1.3 | Integer32 | read-only | The current CA sequence number associated with
this DCS. |
| C32 scspDCSCAIn | 1.3.6.1.3.2001.1.3.1.4 | Counter32 | read-only | The number of CA messages received from this DCS. |
| C32 scspDCSCAOut | 1.3.6.1.3.2001.1.3.1.5 | Counter32 | read-only | The number of CA messages sent to this DCS. |
| C32 scspDCSCAInvalidIn | 1.3.6.1.3.2001.1.3.1.6 | Counter32 | read-only | The number of invalid CA messages received from this
DCS.
During Master/Slave negotiation state, two types of
messages are correct:
1) CA from the DCS has the M, I, and O bits on, with
no CSAS records and sender's ID is larger than the
LSID.
2) CA from the DCS has the M and I bits off and the
sender's ID is smaller than the LSID.
All other types of CA messages are invalid and
ignored. During Cache Summarize State, two kinds of
message errors are possible:
1) M bit in received CA is set incorrectly;
2) CA sequence number is neither equal nor one
more than the current LS's CA sequence number when
LS is slave or CA sequence number is neither equal
nor one less than the current LS's CA sequence number
when LS is master. Other common errors include failed
check sum, failed authentication if applicable,
errors in the message fields. |
| C32 scspDCSCADuplicateIn | 1.3.6.1.3.2001.1.3.1.7 | Counter32 | read-only | The number of duplicate CA messages received from
this DCS. A CA message is considered duplicate when
1)LS is master and received a CA message with its
sequence number one less than the current sequence
number; or
2)LS is slave and received a CA message with its
sequence number equal to the LS's current sequence
number. |
| INT scspDCSMSState | 1.3.6.1.3.2001.1.3.1.8 | INTEGER | read-only | The master/slave status of this DCS. This object
should be ignored when CAFSM is in 'down' state. |
| C32 scspDCSCSUSIn | 1.3.6.1.3.2001.1.3.1.9 | Counter32 | read-only | The number of CSUS sent from this DCS to the LS. |
| C32 scspDCSCSUSOut | 1.3.6.1.3.2001.1.3.1.10 | Counter32 | read-only | The number of CSUS sent from LS to this DCS. |
| C32 scspDCSCSUSInvalidIn | 1.3.6.1.3.2001.1.3.1.11 | Counter32 | read-only | The number of Invalid CSUS sent from this DCS to the LS. |
| C32 scspDCSCSURequestIn | 1.3.6.1.3.2001.1.3.1.12 | Counter32 | read-only | The number of CSU requests LS received from this DCS. |
| C32 scspDCSCSUReplyOut | 1.3.6.1.3.2001.1.3.1.13 | Counter32 | read-only | The number of CSU replies sent from LS to this DCS. |
| C32 scspDCSCSURequestOut | 1.3.6.1.3.2001.1.3.1.14 | Counter32 | read-only | The number of CSU requests sent from LS to this DCS. |
| C32 scspDCSCSUReplyIn | 1.3.6.1.3.2001.1.3.1.15 | Counter32 | read-only | The number of CSU replies LS received from this DCS. |
| C32 scspDCSCSUInvalidRequestIn | 1.3.6.1.3.2001.1.3.1.16 | Counter32 | read-only | The number of invalid CSU requests LS received from
this DCS. The possible errors in the CSU request
messages: the received CSU request's Receiver ID is
not equal to the LSID, etc.
Other common errors include failed authentication if
applicable, errors in the message fields, etc. |
| C32 scspDCSCSUInvalidReplyIn | 1.3.6.1.3.2001.1.3.1.17 | Counter32 | read-only | The number of invalid CSU replies LS received from
this DCS. The possible errors in the CSU reply
messages: the received CSU reply's Receiver ID is not
equal to the LSID, etc.
Other common errors include failed authentication if
applicable, errors in the message fields, etc. |
| C32 scspDCSCSAIn | 1.3.6.1.3.2001.1.3.1.18 | Counter32 | read-only | The total number of CSA records received from
this DCS to this LS. |
| C32 scspDCSCSAOut | 1.3.6.1.3.2001.1.3.1.19 | Counter32 | read-only | The total number of CSA records sent from LS
to this DCS. |
| C32 scspDCSCSAReXmted | 1.3.6.1.3.2001.1.3.1.20 | Counter32 | read-only | The total number of CSA records re-transmited from LS
to this DCS. |
| I32 scspDCSCSAReXmtQDepth | 1.3.6.1.3.2001.1.3.1.21 | Integer32 | read-only | The depth of CSA Re-transmit queue associated with
this DCS. The CSAs in the Re-transmit queue are
pending to acknowledged. |
| ROW scspDCSRowStatus | 1.3.6.1.3.2001.1.3.1.22 | RowStatus | read-create | This object allows DCS entries to be created and
deleted from the scspDCSTable. This table is closely
coupled with its corresponding protocol dependent table.
A new row creation in this table results in creation of
a new row in the corresponding protocol dependent table.
When the scspServerRowStatus is deleted by setting this
object to destroy(6), this results in removing the
corresponding entries in its corresponding protocol
dependent table. |
| scspNotifications | 1.3.6.1.3.2001.2 | | | |
| NTF scspCSAReXmExceed | 1.3.6.1.3.2001.2.1 | | | Retransmission of a CSA to this DCS has exceeded
maximum retry limit, indicating an 'abnormal event'
has happened between the LS/DCS association. The
HSFM associated with this DCS is transitioned into
the 'Waiting' state, and a 'scspHFSMWaiting' trap
is also generated. |
| scspConformance | 1.3.6.1.3.2001.3 | | | |
| scspCompliances | 1.3.6.1.3.2001.3.1 | | | |
| scspCompliance | 1.3.6.1.3.2001.3.1.1 | | | The compliance statement for entities that are required
for the management of SCSP. |
| scspGroups | 1.3.6.1.3.2001.3.2 | | | |
| scspLSGroup | 1.3.6.1.3.2001.3.2.1 | | | A collection of objects which support the management of
the Server group and the Local Server. This group is
mandatory. |
| scspDCSGroup | 1.3.6.1.3.2001.3.2.2 | | | A collection of objects which support the management of
the information exchange session between the LS and its
associated DCS. This group is mandatory. |
