All MIBs › SALIX-DS0-RTP-MIB
Organization: SALIX Technologies
Last Updated: 1998-10-13
Category: SALIX Technologies Media Gateway, SIP and VoIP Protocol, VoIP and Media Gateway
Description: Manages SALIX Technologies DS0 RTP bearer channel configuration and voice transport statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is SALIX-DS0-RTP-MIB?
SALIX-DS0-RTP-MIB is a vendor-specific MIB from Salix Technologies covering DS0-to-RTP gateway functionality, where individual DS0 (64 kbps) voice channels from a channelized T1/E1 trunk are packetized into RTP streams for transport over IP. It is intended to expose the state and configuration of these DS0-RTP bearer connections so a management station can see which timeslots are actively bridged into VoIP RTP sessions. Its monitoring focus, per its description, is on per-channel bearer/connection status rather than chassis-wide hardware health, supporting confirmation that a gateway's voice channels are correctly provisioned and passing traffic. It depends on standard SNMPv2 conformance conventions (its compliance/group objects) and likely on other Salix enterprise MIBs for the parent gateway and DS0 channel objects. It is typically deployed in TDM-to-IP voice gateways used by carriers or enterprises bridging legacy DS0 trunks onto RTP/IP voice networks. Network engineers evaluating or troubleshooting this functionality can download the SALIX-DS0-RTP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in SALIX-DS0-RTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Salix Technologies DS0-to-RTP voice gateway
Monitoring Examples
The sample objects available here (salixDsx0RtpGroups, salixDsx0RtpCompliances) are conformance/compliance group definitions rather than pollable data objects, so specific per-channel object names cannot be given from this source; in practice this module would be used to confirm whether a given DS0 timeslot's RTP bearer connection is active and correctly mapped, but that detail isn't verifiable from the provided sample.
Imported Objects
From IF-MIB
| InterfaceIndex |
From RFC1213-MIB
| DisplayString |
From SALIX-MIB
| platform1 | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE |
From SNMPv2-TC
| RowStatus | |
| TimeStamp |
OIDs
RFC description
Monitors DS0-RTP (Digital Signal 0 Real-Time Protocol) connections for voice and data transmission over IP networks.
Start monitoring Salix Technologies DS0-to-RTP voice gateway (per-channel bearer/connection status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.