SALIX-DS1-MIB

All MIBs › SALIX-DS1-MIB

Organization: SALIX Technologies

Last Updated: 1999-07-08

Category: SALIX Technologies Media Gateway, VoIP and Media Gateway

Description: Manages SALIX Technologies DS1 interface configuration, framing, and performance counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SALIX-DS1-MIB?

SALIX-DS1-MIB is a SALIX Technologies proprietary MIB augmenting the standard DS1-MIB with SALIX-specific DS1 configuration for LANE/ATM media-gateway products. Its configuration table, keyed by interface, records continuity-test type, D-channel presence, auto-initiate state, D-channel mode, robbed-bit signaling enable, and TDM echo cancellation. As a configuration MIB it lets an administrator confirm robbed-bit signaling and echo-cancellation settings on a DS1 interface carrying voice traffic. It is deployed on SALIX Technologies media-gateway products. Engineers can download the SALIX-DS1-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SALIX-DS1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SALIX Technologies media-gateway products

Monitoring Examples

An administrator checks salixDsx1RobbedBitSignalling and salixDsx1TDMEchoCancellation to confirm DS1 signaling settings match the PBX's requirements on a SALIX media gateway.

What Can Be Monitored

DS1 signaling and echo-cancellation configuration

Imported Objects

From ATM-FORUM-M4-MIB

atmfM4TrapAlarmSeverity

OBJECT-TYPE

From DS1-MIB

dsx1ConfigEntry

OBJECT-TYPE

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From HOST-RESOURCES-MIB

DateAndTime

From SALIX-MIB

salixGeneric

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
salixDsx1MIB	1.3.6.1.4.1.2158.2.7			The MIB describing objects relating to DS1 interfaces, specifically items that augment objects from the DS1-MIB
salixDsx1MIBObjects	1.3.6.1.4.1.2158.2.7.1
salixDsx1ConfigTable	1.3.6.1.4.1.2158.2.7.1.1		not-accessible	The SALIX DS1 config table This table augments the dsx1ConfigTable defined in the DS1 MIB.
salixDsx1ConfigEntry	1.3.6.1.4.1.2158.2.7.1.1.1		not-accessible	An entry in the SALIX DS1 config table. This entry containts SALIX specific DS1 configuration objects
INT salixDsx1ContinuityTestType	1.3.6.1.4.1.2158.2.7.1.1.1.1	INTEGER	read-write	The type of continuity test that should be setup. An entry exists for every DS1 in the system. This object is consulted when IPDC is requested to setup a continuity test. Since this value is specified in SGCP, it is not consulted if the SGCP protocol is used. Writing to this value has the effect that it changes the continuity test type for any subsequently setup continuity tests. Any tests currently in progress are not effected by changing this object.
T/F salixDsx1DChannelPresent	1.3.6.1.4.1.2158.2.7.1.1.1.2	TruthValue	read-write	An indication of whether channel 24 of the DS1 is reserved for D channel signaling.
T/F salixDsx1AutoInitiateState	1.3.6.1.4.1.2158.2.7.1.1.1.3	TruthValue	read-write	An indication of whether the D channel data link control (layer 2) should be initiated automatically during DS1 initialization or brought up on demand. This attribute is only relevant if salixDsx1DChannelPresent is 'true'.
INT salixDsx1DChannelMode	1.3.6.1.4.1.2158.2.7.1.1.1.4	INTEGER	read-write	An indication of whether the D Channel (if present) on the given DS1 should be configured as 'user mode' or as 'network mode'. This attributes is only used if the salixDsx1DChannelPresent field is set to 'true'
INT salixDsx1RobbedBitSignalling	1.3.6.1.4.1.2158.2.7.1.1.1.5	INTEGER	read-write	An indication of whether the 'ABCD' bits of the DS0s in the DS1 should be configured for robbed bit signalling.
INT salixDsx1TDMEchoCancellation	1.3.6.1.4.1.2158.2.7.1.1.1.7	INTEGER	read-write	An indication of whether echo cancellation should be applied to the DS0s in the DS1. echoCancel16ms - 16 millisecond echo cancellation tail length echoCancel32ms - 32 millisecond echo cancellation tail length echoCancel63ms - 63 millisecond echo cancellation tail length
salixDsx1MIBTraps	1.3.6.1.4.1.2158.2.7.2
salixDsx1MIBTrapPrefix	1.3.6.1.4.1.2158.2.7.2.0
salixDsx1MIBCompliance	1.3.6.1.4.1.2158.2.7.3
salixDs1Groups	1.3.6.1.4.1.2158.2.7.3.1
salixDs1Group	1.3.6.1.4.1.2158.2.7.3.1.1			Salix DS1 Objects Group
salixDs1Compliances	1.3.6.1.4.1.2158.2.7.3.2
salixDs1Compliance	1.3.6.1.4.1.2158.2.7.3.2.1			The basic implementation requirements for the SALIX-DS1-MIB.

RFC description

DS1 interface configuration and management extensions for SALIX telecom equipment.

Start monitoring SALIX Technologies media-gateway products (DS1 signaling/echo-cancellation configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SALIX-DS1-MIB

What Is SALIX-DS1-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description