SAF-INTEGRAB-MIB :: integraBifEtherStatsFragments

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › SAF-INTEGRAB-MIB › integraBifEtherStatsFragments

integraBifEtherStatsFragments

Module: SAF-INTEGRAB-MIB

OID (symbolic): SAF-INTEGRAB-MIB::integraBifEtherStatsFragments

OID (numeric): 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.47

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.

What is integraBifEtherStatsFragments?

A running count of received packets under 64 octets with a bad FCS (either aligned or misaligned), commonly called runts. The source notes it's entirely normal for this counter to increment somewhat, since it captures both collision-related runts and general noise hits, so an admin watches its rate of increase rather than treating any nonzero value as alarming.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.47
snmpwalk -v2c -c public <target> SAF-INTEGRAB-MIB::integraBifEtherStatsFragments

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.47.1
snmpget -v2c -c public <target> SAF-INTEGRAB-MIB::integraBifEtherStatsFragments.1

Start monitoring SAF Tehnika Integra-B microwave radio link equipment (transmit power/receive level/temperature) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the SAF-INTEGRAB-MIB::integraBifEtherStatsFragments OID value, configure state conditions and alerts, and monitor any SAF Tehnika Integra-B microwave radio link equipment (transmit power/receive level/temperature) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.7571safSAF-ENTERPRISE
1.3.6.1.4.1.7571.100tehnikaSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1microwaveRadioSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1.1pointToPointSAF-ENTERPRISE
1.3.6.1.4.1.7571.100.1.1.7safIntegraSAF-INTEGRA-MIB
Numeric OIDNameModule
1.3.6.1.4.1.7571.100.1.1.7.1integraBSAF-INTEGRAB-MIB
1.3.6.1.4.1.7571.100.1.1.7.1.5integraBethernetSAF-INTEGRAB-MIB
1.3.6.1.4.1.7571.100.1.1.7.1.5.2integraBifStatisticsTableSAF-INTEGRAB-MIB
1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1integraBifPortStcEntrySAF-INTEGRAB-MIB
1.3.6.1.4.1.7571.100.1.1.7.1.5.2.1.47integraBifEtherStatsFragmentsSAF-INTEGRAB-MIB