SAF-ALARM-MIB

All MIBs › SAF-ALARM-MIB

Organization: SAF Tehnika

Last Updated: 2012-12-07

Category: Microwave Radio - SAF Tehnika, SAF Tehnika Microwave

Description: Manages SAF Tehnika microwave radio alarm definitions, severity levels, and notification objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is SAF-ALARM-MIB?

SAF-ALARM-MIB manages alarm reporting for SAF Tehnika microwave radio transmission equipment, used in point-to-point wireless backhaul links. It exposes a table of currently active alarms along with severity and timestamp information, plus notification objects for alarm state changes. This is a fault/status monitoring MIB at its core: it lets an admin see exactly which alarms are currently active on the radio link (e.g. signal degradation, hardware faults, link loss) and when the active alarm list last changed, which is central to assessing the operational health of the microwave transmission hardware. It follows the standard SNMPv2-CONF compliance/group structure common to vendor alarm MIBs. It is deployed in telecom and ISP backhaul networks using SAF Tehnika microwave radios, where NMS platforms poll or receive traps for the active alarm table to maintain link health visibility. Engineers can download the SAF-ALARM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in SAF-ALARM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

SAF Tehnika microwave radio transmission equipment

Monitoring Examples

An admin would poll safAlarmActiveTable (safAlarmActiveEntry) indexed by safAlarmActiveIndex to retrieve the full list of currently active alarms on a SAF Tehnika radio, and check safAlarmActiveLastChanged/safAlarmActiveLastChangedDateAndTime to see when the alarm set last changed, useful for correlating with a recent outage. A non-empty safAlarmActiveTable combined with a recent safAlarmActiveLastChangedDateAndTime would indicate a new fault condition on the radio link needing investigation, such as a signal fade or hardware failure. safAlarmNotifications would deliver traps proactively when new alarms are raised or cleared.

What Can Be Monitored

active alarm list
alarm severity
time of last alarm state change
alarm notifications/traps

Imported Objects

From ALARM-MIB

alarmActiveDateAndTime	OBJECT-TYPE
alarmActiveIndex	OBJECT-TYPE
alarmListName	OBJECT-TYPE
alarmModelIndex	OBJECT-TYPE

From IANA-ITU-ALARM-TC-MIB

IANAItuEventType

From ITU-ALARM-TC-MIB

ItuTrendIndication

From SAF-ENTERPRISE

tehnika

OBJECT-IDENTITY

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

AutonomousType
DateAndTime
DisplayString
RowPointer
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
safAlarmMIB	1.3.6.1.4.1.7571.100.118			The MIB module describes a solution to SAF Tehnika equipment alarms and to store the current list of active alarms. Copyright (C) SAF Tehnika, 2007-2012.
safAlarmNotifications	1.3.6.1.4.1.7571.100.118.0
NTF safAlarmActiveState	1.3.6.1.4.1.7571.100.118.0.2			An instance of the alarm indicated.
NTF safAlarmActiveTState	1.3.6.1.4.1.7571.100.118.0.3			An instance of the alarm indicated.
NTF safAlarmClearState	1.3.6.1.4.1.7571.100.118.0.4			An instance of the clear alarm.
safAlarmObjects	1.3.6.1.4.1.7571.100.118.1
safAlarmActive	1.3.6.1.4.1.7571.100.118.1.1
TIK safAlarmActiveLastChanged	1.3.6.1.4.1.7571.100.118.1.1.1	TimeTicks	read-only	The value of sysUpTime at the time of the last creation, deletion or modification of an entry in the safAlarmTable(s).
safAlarmActiveTable	1.3.6.1.4.1.7571.100.118.1.1.2		not-accessible	Alarm table.
safAlarmActiveEntry	1.3.6.1.4.1.7571.100.118.1.1.2.1		not-accessible	Entries of alarm table.
U32 safAlarmActiveIndex	1.3.6.1.4.1.7571.100.118.1.1.2.1.1	Unsigned32	not-accessible	An integer that acts as an alarm Id to uniquely identify each alarm within the alarm list.
OID safAlarmActiveManagedObj	1.3.6.1.4.1.7571.100.118.1.1.2.1.2	OBJECT IDENTIFIER	read-only	Object, which raises an alarm. Indicates specific object, which raises an alarm. This should refer to interfaces or Object class and instance.
DAT safAlarmActiveDateAndTime	1.3.6.1.4.1.7571.100.118.1.1.2.1.3	DateAndTime	read-only	Alarm date and time.
IAN safAlarmActiveEventType	1.3.6.1.4.1.7571.100.118.1.1.2.1.4	IANAItuEventType	read-only	Alarm type in accordance with IANA.
SAF safAlarmActiveProbableCause	1.3.6.1.4.1.7571.100.118.1.1.2.1.5	SafAlarmProbableCause	read-only	This parameter defines further qualification as to the probable cause of the alarm. Probable cause values for notifications shall be indicated in te behaviour clause of the object class definition. This parameter defines standard probables causes that have wide applicability across managed object classes.
SAF safAlarmActivePerceivedSeverity	1.3.6.1.4.1.7571.100.118.1.1.2.1.6	SafPerceivedSeverity	read-only	ITU perceived severity values.
I32 safAlarmActiveThresholdTrigered	1.3.6.1.4.1.7571.100.118.1.1.2.1.7	Integer32	read-only	The identifier of the threshold attribute that caused the notification.
I32 safAlarmActiveThresholdValue	1.3.6.1.4.1.7571.100.118.1.1.2.1.8	Integer32	read-only	The value of the gauge or counter which crossed the threshold. This may be different from the threshold value if, for example, the gauge may only take on descrete values.
STR safAlarmActiveThresholdTTrigered	1.3.6.1.4.1.7571.100.118.1.1.2.1.9	DisplayString	read-only
STR safAlarmActiveThresholdTValue	1.3.6.1.4.1.7571.100.118.1.1.2.1.10	DisplayString	read-only
STR safAlarmActiveAdditionalText	1.3.6.1.4.1.7571.100.118.1.1.2.1.11	SnmpAdminString	read-only	Alarm information interpreted in user friendly text. For example, 'Ethernet interface'.
DAT safAlarmActiveLastChangedDateAndTime	1.3.6.1.4.1.7571.100.118.1.1.3	DateAndTime	read-only	The value of Date and Time when the last creation, deletion or modification of an entry in the safAlarmTable(s).
safAlarmConformance	1.3.6.1.4.1.7571.100.118.3
safAlarmGroups	1.3.6.1.4.1.7571.100.118.3.2
safAlarmActiveGroup	1.3.6.1.4.1.7571.100.118.3.2.1			Active Alarm list group.
safAlarmNotificationsGroup	1.3.6.1.4.1.7571.100.118.3.2.2			The collection of notifications that can be used to alarms for faults.
safAlarmNotificationsGroup1	1.3.6.1.4.1.7571.100.118.3.2.3			The collection of notifications that can be used to alarms for faults.

RFC description

Manages alarm collection and storage for SAF Tehnika equipment to track active alarm states.

Start monitoring SAF Tehnika microwave radio transmission equipment (active alarm table/severity/timestamp) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download SAF-ALARM-MIB

What Is SAF-ALARM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description