RUGGEDCOM-MIB

All MIBs › RUGGEDCOM-MIB

Organization: RuggedCom

Last Updated: 2017-09-20

Category: Industrial Networking

Description: Manages configuration and operational status for Siemens RuggedCom ruggedized industrial Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RUGGEDCOM-MIB?

RUGGEDCOM-MIB is the enterprise structure-of-management-information module for Siemens RuggedCom, a line of ruggedized industrial Ethernet switches designed for harsh environments like utility substations, rail, and industrial automation sites. It primarily registers the OID hierarchy for RuggedCom product families (e.g. RX1000/RX1100, RX5000, MX5000 series) rather than exposing runtime data itself. As a structure/registration module it does not directly carry hardware or software status objects, but it is the foundation under which RuggedCom's operational MIBs (covering switch port status, environmental conditions, and software version for these ruggedized devices) register their OIDs. It follows the standard SNMPv2-SMI enterprise numbering convention used across Siemens/RuggedCom's MIB family. It is used as a prerequisite structural MIB when compiling or navigating the full RuggedCom device MIB set for industrial network monitoring. Engineers can download the RUGGEDCOM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RUGGEDCOM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens RuggedCom RX1000/RX1100/RX5000/MX5000 ruggedized industrial Ethernet switches (registration module only)

Monitoring Examples

This module lists product-family OID nodes such as ruggedcomRX1XXX, ruggedcomRX1000, ruggedcomRX1100, ruggedcomRX5XXX, ruggedcomRX5000, and ruggedcomMX5000, which are pure identity/registration arcs rather than pollable data objects. It cannot itself be used for a monitoring scenario since it defines no counters or status leaves; the actual operational data (port status, environmental sensors, software version) would live in a separate RuggedCom device or system MIB that registers beneath these arcs. Network management tools use this module chiefly to recognize which specific RuggedCom hardware model a device identifies as via its sysObjectID.

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY
enterprises

OIDs

OID symbolic	OID numeric	Description
ruggedcom	1.3.6.1.4.1.15004	RuggedCom enterprise structure of management information.
ruggedcomExperiment	1.3.6.1.4.1.15004.1	The root object identifier from which experimental MIBs may be temporarily based. MIBs are typicaly based here if they fall in one of two categories: 1) are IETF work-in-process MIBs which have not been assigned a permanet object identifier by the IANA. 2) are RugedCom work-in-process which has not been assigne a permanent object identifier, typically because the MIB is not ready for deployment.
ruggedcomProducts	1.3.6.1.4.1.15004.2	The root object identifier from which sysObjectID values are assigned.
ruggedcomRX1XXX	1.3.6.1.4.1.15004.2.4
ruggedcomRX1000	1.3.6.1.4.1.15004.2.4.1
ruggedcomRX1100	1.3.6.1.4.1.15004.2.4.2
ruggedcomRX5XXX	1.3.6.1.4.1.15004.2.5
ruggedcomRX5000	1.3.6.1.4.1.15004.2.5.1
ruggedcomMX5000	1.3.6.1.4.1.15004.2.5.2
ruggedmaxProducts	1.3.6.1.4.1.15004.2.6
ruggedcomRX15XX	1.3.6.1.4.1.15004.2.8
ruggedcomRX1500	1.3.6.1.4.1.15004.2.8.1
ruggedcomRX1501	1.3.6.1.4.1.15004.2.8.2
ruggedcomRX1510	1.3.6.1.4.1.15004.2.8.11
ruggedcomRX1511	1.3.6.1.4.1.15004.2.8.12
ruggedcomRX1512	1.3.6.1.4.1.15004.2.8.13
ruggedcomRX1XXXrox2X	1.3.6.1.4.1.15004.2.9
ruggedcomRX1000rox2X	1.3.6.1.4.1.15004.2.9.1
ruggedcomRX1100rox2X	1.3.6.1.4.1.15004.2.9.2
ruggedcomAirModule	1.3.6.1.4.1.15004.2.10
ruggedcomMC	1.3.6.1.4.1.15004.2.11
ruggedcomOtherEnterprises	1.3.6.1.4.1.15004.3	The root object identifier from which MIBs produced by other companies may be placed. MIBs produced by other enterprises are typically implemented with the object identifiers as defined in the MIB, but if the MIB is deemed to be uncontrolelled, we may reroot the MIB at this subtree in order to have a controlled version.
ruggedcomMgmt	1.3.6.1.4.1.15004.4	The main subtree for new MIB development where specific RuggedCom proprietary MIBs can be placed.
ruggedcomTraps	1.3.6.1.4.1.15004.5	The root of the subtree where RuggedCom traps can be placed.
ruggedcomAgentCapabilities	1.3.6.1.4.1.15004.6	The root object identifier from which AGENT-CAPABILITIES values may be assigned.
ruggedcomAgentCapability	1.3.6.1.4.1.15004.6.30	The root object identifier from which AGENT-CAPABILITIES for individual MIBs are described.

RFC description

Manages Siemens RuggedCom ruggedized industrial Ethernet switch configuration and operational status.

Start monitoring Siemens RuggedCom RX1000/RX1100/RX5000/MX5000 ruggedized industrial Ethernet switches (base OID registration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RUGGEDCOM-MIB

What Is RUGGEDCOM-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description