UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB

Organization: Ubiquoss Corp.

Last Updated: 2008-06-13

Description: QoS and service profile definitions for Ubiquoss EPON OLT/ONU, including service maps, filter rules, and traffic classification

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB?

UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB is a Ubiquoss vendor MIB that defines QoS and service profile configuration for EPON OLT/ONU equipment, including service maps, traffic filter rules, and classification policies. It is primarily a configuration-oriented MIB rather than a runtime-counter MIB, modeling how traffic on a PON is classified and mapped into service profiles/QoS queues. Its monitoring value is mainly indirect: by reading back the configured profile and filter-rule assignments, an operator can verify that QoS policy configuration on a given OLT/ONU matches intent, though it does not itself expose hardware health or fault status. It is a vendor-specific extension used alongside Ubiquoss's broader EPON MIB suite (including the EPON PM and switch-interface MIBs) rather than a standard IETF QoS MIB. It is deployed on Ubiquoss EPON OLT and ONU equipment in fiber access network deployments requiring differentiated service tiers. Engineers can download the UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Ubiquoss EPON OLT
  • Ubiquoss ONU
  • Ubiquoss EPON/GPON access switches

Monitoring Examples

No sample objects were provided for this module, so specific table names cannot be quoted, but per its description an operator would review configured service maps and filter rules to confirm which QoS profile is applied to a given PON port or ONU. Discovering a mismatch between the expected and actual profile assignment would explain unexpected traffic prioritization or classification behavior on that port. This remains a general description since the batch supplied no concrete object names for this module.

What Can Be Monitored

  • QoS/service profile assignment
  • traffic filter rule configuration
  • traffic classification policy
Imported Objects

From IF-MIB

ifIndexOBJECT-TYPE

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus

From UBIQUOSS-EPON-TC-MIB

OnuType
PonFilterRuleField
PonFilterRuleOperator

From UBQS-SMI

ubiEponGroupMIBOBJECT-IDENTITY
OIDs

RFC description

Vendor-private MIB for Ubiquoss EPON passive optical networks, managing PON profile groups for optical line terminal (OLT) and optical network unit (ONU) devices.

Start monitoring Ubiquoss EPON/GPON access switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBIQUOSS-EPON-PON-PROFILE-GROUP-MIB