RUCKUS-ZD-WLAN-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › RUCKUS-ZD-WLAN-MIB

Organization: Ruckus Wireless, Inc.

Last Updated: 2010-10-15

Category: Wireless and Radio

Description: Manages WLAN operational status, client statistics, and traffic data on Ruckus ZoneDirector.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RUCKUS-ZD-WLAN-MIB?

RUCKUS-ZD-WLAN-MIB is a Ruckus Wireless, Inc. proprietary MIB reporting WLAN (SSID) configuration and traffic/association statistics on a Ruckus ZoneDirector-managed wireless network. Its WLAN table, keyed by index, records SSID, description, authentication/encryption method, guest flag, SSID-broadcast-disable flag, VLAN ID, uplink/downlink rate limits, tunnel-WLAN flag, VAP/station counts, RX/TX packet and byte counts, and detailed 802.11 authentication/association/reassociation request-response-success-failure counters. As a performance/status MIB it lets an administrator watch per-WLAN traffic volume and client authentication success/failure rates on a Ruckus ZoneDirector-managed network. It is deployed on Ruckus Wireless ZoneDirector-managed access points. Engineers can download the RUCKUS-ZD-WLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RUCKUS-ZD-WLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Ruckus Wireless ZoneDirector-managed access points

Monitoring Examples

An administrator monitors ruckusZDWLANAuthFail against ruckusZDWLANAuthTotal to catch a rising client authentication failure rate on a Ruckus ZoneDirector-managed WLAN.

What Can Be Monitored

  • per-WLAN traffic and client authentication/association statistics
Imported Objects

From IANAifType-MIB

IANAifType

From IF-MIB

InterfaceIndex
ifIndexOBJECT-TYPE

From RUCKUS-ROOT-MIB

ruckusZDWLANModuleOBJECT-IDENTITY

From RUCKUS-TC-MIB

RuckusAdminStatus
RuckusRadioMode
RuckusRateLimiting
RuckusSSID
RuckusdB

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using ruckusZDWLANRxPkts OID:

Select a Ruckus Wireless ZoneDirector-managed access point (WLAN traffic/association statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ruckusZDWLANRxPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the received packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Manages WLAN (wireless local area network) configuration and status on Ruckus ZD wireless controllers, including SSID, radio, and rate limiting settings.

Start monitoring Ruckus Wireless ZoneDirector-managed access points (WLAN traffic/association statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RUCKUS-ZD-WLAN-MIB