RUCKUS-ZD-WLAN-CONFIG-MIB

All MIBs › RUCKUS-ZD-WLAN-CONFIG-MIB

Organization: Ruckus Wireless, Inc.

Last Updated: 2010-10-15

Category: Wireless and Radio

Description: Manages WLAN service profile configuration parameters on Ruckus ZoneDirector controllers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RUCKUS-ZD-WLAN-CONFIG-MIB?

RUCKUS-ZD-WLAN-CONFIG-MIB is a Ruckus Wireless, Inc. proprietary MIB configuring WLAN (SSID) profiles on a Ruckus ZoneDirector wireless controller. Its WLAN-configuration table, keyed by ID, records SSID, description, name, service type, authentication and encryption method, WEP key index/key, WPA cipher type/key, authentication-server ID, wireless-client isolation, ZeroIT activation, hotspot ID, service priority, accounting-server ID and update interval, uplink/downlink rate limits, IGMP snooping, VLAN ID, and dynamic-VLAN flag. As a configuration MIB it lets an administrator confirm a WLAN's security (encryption/authentication) and VLAN/rate-limit settings on a Ruckus ZoneDirector-managed WLAN. It is deployed on Ruckus Wireless ZoneDirector-managed access points. Engineers can download the RUCKUS-ZD-WLAN-CONFIG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RUCKUS-ZD-WLAN-CONFIG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ruckus Wireless ZoneDirector-managed access points

Monitoring Examples

An administrator checks ruckusZDWLANConfigEncryption and ruckusZDWLANConfigVlanID to confirm a WLAN's security and VLAN assignment on a Ruckus ZoneDirector controller.

What Can Be Monitored

WLAN security, VLAN, and rate-limit configuration

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From RUCKUS-ROOT-MIB

ruckusZDWLANModule

OBJECT-IDENTITY

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
ruckusZDWLANConfigMIB	1.3.6.1.4.1.25053.1.2.2.2			Ruckus ZD WLAN Configuration mib
ruckusZDWLANConfigObjects	1.3.6.1.4.1.25053.1.2.2.2.1
ruckusZDWLANConfig	1.3.6.1.4.1.25053.1.2.2.2.1.1
ruckusZDWLANConfigTable	1.3.6.1.4.1.25053.1.2.2.2.1.1.1		not-accessible	ZD WLAN table.
ruckusZDWLANConfigEntry	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1		not-accessible	Specifies each ZD WLAN configuration entry.
INT ruckusZDWLANID	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.1	INTEGER	not-accessible	this Wireless LAN(WLAN) ID.Max value:for zd1000 zd1100,128;for zd3000,1024;for zd5000,2048
OCT ruckusZDWLANConfigSSID	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.2	OCTET STRING	read-write	SSID for this Wireless LAN. It can't be modified after creating it.
STR ruckusZDWLANConfigDescription	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.3	DisplayString	read-write	Description for this Wireless LAN.
OCT ruckusZDWLANConfigName	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.4	OCTET STRING	read-write	Name for this Wireless LAN
INT ruckusZDWLANConfigWLANServiceType	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.8	INTEGER	read-write	Select The the Service type for the Wireless LAN. for hotSpotService,only read-only
INT ruckusZDWLANConfigAuthentication	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.10	INTEGER	read-write	Authentication method choosen for this Wireless LAN.
INT ruckusZDWLANConfigEncryption	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.12	INTEGER	read-write	Encryption method choosen for this Wireless LAN.
INT ruckusZDWLANConfigWEPKeyIndex	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.15	INTEGER	read-write	Select the WEP key index for the WEP encryption.
OCT ruckusZDWLANConfigWEPKey	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.16	OCTET STRING	read-write	Enter the Pass-phrase for the WEP encryption method. Only 10 or 26 Hex character.such as: 1122334455
INT ruckusZDWLANConfigWPACipherType	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.20	INTEGER	read-write	Enter the encryption cipher method for the WPA encryption.
OCT ruckusZDWLANConfigWPAKey	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.21	OCTET STRING	read-write	Enter the Pass-phrase for the WPA encryption. Specifies the WPA PSK (Wi-Fi Protected Access Pre Shared key) If the key length is 64 then all 64 characters should be in hex, otherwise the key assumed to be ascii.
INT ruckusZDWLANConfigAuthenticationServerID	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.25	INTEGER	read-write	Select the Authentication Server by the registered Server ID. This server id must exist in table: ruckusZDAAAConfigTable(aaa-authentication) or local.
INT ruckusZDWLANConfigWirelessClientIsolation	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.28	INTEGER	read-write	set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet.
INT ruckusZDWLANConfigZeroITActivation	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.30	INTEGER	read-write	Enable the Zero IT Activation Service of the Wireless LAN or not.
INT ruckusZDWLANConfigWLANHotspotID	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.31	INTEGER	read-write	Select the Hotspot Server for the Wireless LAN. 0, no hotspot server; 1-32,hotspot server must exist.
INT ruckusZDWLANConfigWLANServicePriority	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.32	INTEGER	read-write	Select the QOS service priority for the Wireless LAN.
INT ruckusZDWLANConfigAccountingServerID	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.35	INTEGER	read-write	Select the (RADIUS) Accounting Server by the registered Server ID. 0,disable; This server id must exist in table: ruckusZDAAAConfigTable(aaa-accounting)
INT ruckusZDWLANConfigAccountingUpdateInterval	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.36	INTEGER	read-write	Enter interval in minutes to update Accounting Server.
OCT ruckusZDWLANConfigUplinkRate	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.40	OCTET STRING	read-write	Disable or Set the Speed/Rate limiting of uplink. Valid range is 0.10mbps or between 0.25mbps~20.00mbps in 0.25mbps step. Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'
OCT ruckusZDWLANConfigDownlinkRate	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.41	OCTET STRING	read-write	Disable or Set the Speed/Rate limiting of downlink. Valid range is 0.10mbps or between 0.25mbps~20.00mbps in 0.25mbps step. Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',...,'19.75mbps','20.00mbps'
INT ruckusZDWLANConfigIGMPSnooping	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.42	INTEGER	read-write	IGMP Snooping state of the WLAN.
INT ruckusZDWLANConfigVlanID	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.45	INTEGER	read-write	Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged.
INT ruckusZDWLANConfigDynamicVLAN	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.46	INTEGER	read-write	Enable the Service of the dynamic Wireless LAN or not. For 802.1x EAP + MAC Address model,'set' is not supported.
T/F ruckusZDWLANConfigHideSSID	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.50	TruthValue	read-write	Hide SSID, not to broadcast it SSID.
T/F ruckusZDWLANConfigTunnelMode	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.52	TruthValue	read-write	Enable Tunnel support capability for the Wireless LAN.
T/F ruckusZDWLANConfigBackgroundScanning	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.53	TruthValue	read-write	Select Background Scanning support capability for the Wireless LAN.
INT ruckusZDWLANConfigMaxClientsPerAP	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.55	INTEGER	read-write	Select the Number of client devices the AP can service for the Wireless LAN.
INT ruckusZDWLANConfigWebAuthentication	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.60	INTEGER	read-write	Enable the Wep Authentication or not.
ROW ruckusZDWLANConfigRowStatus	1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.63	RowStatus	read-create	Create, Delete Administration control for this Wireless LAN. 1,ACTIVE state,only for read; 4,CREATEANDGO, create a new table; 6,DESTROY, delete a existing table.
ruckusZDWLANGroupConfigTable	1.3.6.1.4.1.25053.1.2.2.2.1.1.2		not-accessible	ZD WLAN Group table.
ruckusZDWLANGroupConfigEntry	1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1		not-accessible	Specifies each ZD WLAN Group configuration entry.
INT ruckusZDWLANGroupID	1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.1	INTEGER	not-accessible	WLAN Group ID. It can't be modified after creating it. Max value:for zd1000 zd1100,128;for zd3000,1024;for zd5000,2048
STR ruckusZDWLANGroupConfigName	1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.5	DisplayString	read-write	Name for this Wireless LAN Group
STR ruckusZDWLANGroupConfigDescription	1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.6	DisplayString	read-write	Description for this Wireless LAN Group.
T/F ruckusZDWLANGroupVlanOverrideStatus	1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.8	TruthValue	read-only	Enable Vlan Override for the Wireless LAN Group.
ROW ruckusZDWLANGroupConfigRowStatus	1.3.6.1.4.1.25053.1.2.2.2.1.1.2.1.15	RowStatus	read-create	Create, Delete Administration control for this Wireless LAN Group. 1,ACTIVE state,only for read; 4,CREATEANDGO, create a new table; 6,DESTROY, delete a existing table.
ruckusZDWLANGroupCfgAttrTable	1.3.6.1.4.1.25053.1.2.2.2.1.1.3		not-accessible	ZD WLAN table in WLAN group.
ruckusZDWLANGroupCfgAttrEntry	1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1		not-accessible	Specifies each ZD WLAN configuration entry.
INT ruckusZDWLANGroupCfgAttrOverrideType	1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1.3	INTEGER	read-write	WLAN group vlan Override Type.
INT ruckusZDWLANGroupCfgAttrWGVlanTag	1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1.4	INTEGER	read-write	WLAN group vlan tag. for set , range is :1-4094. for get , range is :0-4094: 1: If VLAN ID is 1, packets from this WLAN will be untagged; 0: for node ruckusZDWLANGroupCfgAttrOverrideType is nochange
ROW ruckusZDWLANGroupCfgAttrRowStatus	1.3.6.1.4.1.25053.1.2.2.2.1.1.3.1.10	RowStatus	read-create	Create, Delete Administration control for this Wireless LAN group attr. 1,ACTIVE state,only for read; 4,CREATEANDGO, create a new table; 6,DESTROY, delete a existing table.
ruckusZDHotspotConfigTable	1.3.6.1.4.1.25053.1.2.2.2.1.1.8		not-accessible	ZD Hotspot table.
ruckusZDHotspotConfigEntry	1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1		not-accessible	Specifies each ZD Hotspot configuration entry.
INT ruckusZDHotspotID	1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.1	INTEGER	not-accessible	Hotspot ID.
STR ruckusZDHotspotName	1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.2	DisplayString	read-write	Name for this Hotspot.Can't be modified if created.
STR ruckusZDHotspotRedirectLoginPage	1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.3	DisplayString	read-write	Redirect unauthenticated user to this for authentication. It is URL or IPaddress.
STR ruckusZDHotspotRedirectStartURL	1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.4	DisplayString	read-write	After user is authenticated, redirect to this URL if the redirect type is url.
INT ruckusZDHotspotRedirectType	1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.6	INTEGER	read-write	To decide the redirect target. If it is user, redirect to the user intends to visit.
ROW ruckusZDHotspotRowStatus	1.3.6.1.4.1.25053.1.2.2.2.1.1.8.1.15	RowStatus	read-create	Create, Delete Administration control for this Hotspot.

RFC description

WLAN configuration management for Ruckus Wireless ZoneDirector wireless controllers.

Start monitoring Ruckus Wireless ZoneDirector-managed access points (WLAN/SSID security and VLAN configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RUCKUS-ZD-WLAN-CONFIG-MIB

What Is RUCKUS-ZD-WLAN-CONFIG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description