RUCKUS-SZ-SYSTEM-MIB

All MIBs › RUCKUS-SZ-SYSTEM-MIB

Organization: Ruckus Wireless, Inc.

Last Updated: 2014-05-19

Description: Ruckus SmartZone system-level MIB tracking AP counts, authorized client totals, and interface statistics on Ruckus SmartZone wireless LAN controllers

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RUCKUS-SZ-SYSTEM-MIB?

RUCKUS-SZ-SYSTEM-MIB provides system-level statistics for the Ruckus SmartZone wireless LAN controller, a carrier/enterprise-grade Wi-Fi management platform. It exposes aggregate counts of managed access points and connected stations, WLAN-wide traffic statistics (received/transmitted packets, bytes, multicast, failures, retries), and system identification data like serial number. This MIB is centered on software/system performance status: it lets an admin track how many APs and clients are currently served, gauge overall wireless traffic health via retry and failure counts, and identify the specific controller hardware via its serial number. It operates as the system-summary counterpart within the broader Ruckus SmartZone MIB family alongside per-AP and per-client MIBs. It is deployed in large-scale managed Wi-Fi environments (campuses, stadiums, enterprises), and a RUCKUS-SZ-SYSTEM-MIB download is the usual first step in setting up that fleet-wide wireless health polling for SmartZone controllers.

IPNetwork Monitor allows you to monitor SNMP objects defined in RUCKUS-SZ-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ruckus SmartZone wireless LAN controllers

Monitoring Examples

An admin would poll ruckusSZSystemStatsNumAP and ruckusSZSystemStatsNumSta to track how many access points and stations are currently connected to the SmartZone controller, and ruckusSZSystemStatsWLANTotalTxFail/ruckusSZSystemStatsWLANTotalTxRetry to gauge wireless transmission health across the whole system. A rising ratio of ruckusSZSystemStatsWLANTotalTxRetry to ruckusSZSystemStatsWLANTotalTxPkts would indicate RF interference or congestion across the managed Wi-Fi network. ruckusSZSystemStatsSerialNumber would be used to positively identify which physical or virtual SmartZone appliance is reporting these statistics.

What Can Be Monitored

number of managed access points
number of connected wireless stations
aggregate WLAN Rx/Tx packet and byte counts
WLAN transmit failures and retries
controller serial number

Imported Objects

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From RUCKUS-ROOT-MIB

ruckusSZSystemModule

OBJECT-IDENTITY

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using ruckusSZSystemStatsWLANTotalRxPkts OID:

Select a Ruckus SmartZone wireless LAN controller (fleet-wide AP/station counts and traffic statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ruckusSZSystemStatsWLANTotalRxPkts into the Find box to locate it in the OID tree, then select it and click OK. It reports the total received packets of wireless interfaces. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ruckusSZSystemMIB	1.3.6.1.4.1.25053.1.4.1.1			Ruckus System mib
ruckusSZSystemObjects	1.3.6.1.4.1.25053.1.4.1.1.1
ruckusSZSystemInfo	1.3.6.1.4.1.25053.1.4.1.1.1.1
ruckusSZSystemStats	1.3.6.1.4.1.25053.1.4.1.1.1.15
U32 ruckusSZSystemStatsNumAP	1.3.6.1.4.1.25053.1.4.1.1.1.15.1	Unsigned32	read-only	Number of AP
U32 ruckusSZSystemStatsNumSta	1.3.6.1.4.1.25053.1.4.1.1.1.15.2	Unsigned32	read-only	Number of authorized client devices
C64 ruckusSZSystemStatsWLANTotalRxPktsEx	1.3.6.1.4.1.25053.1.4.1.1.1.15.5	Counter64	read-only	Total received packets of wireless interfaces
C64 ruckusSZSystemStatsWLANTotalRxBytes	1.3.6.1.4.1.25053.1.4.1.1.1.15.6	Counter64	read-only	Total received bytes of wireless interfaces
C64 ruckusSZSystemStatsWLANTotalRxMulticast	1.3.6.1.4.1.25053.1.4.1.1.1.15.7	Counter64	read-only	Total received multicast packets of wireless interfaces
C64 ruckusSZSystemStatsWLANTotalTxPkts	1.3.6.1.4.1.25053.1.4.1.1.1.15.8	Counter64	read-only	Total transmitted packets of wireless interfaces
C64 ruckusSZSystemStatsWLANTotalTxBytes	1.3.6.1.4.1.25053.1.4.1.1.1.15.9	Counter64	read-only	Total transmitted bytes of wireless interfaces
C64 ruckusSZSystemStatsWLANTotalTxMulticast	1.3.6.1.4.1.25053.1.4.1.1.1.15.10	Counter64	read-only	Total transmitted multicast packets of wireless interfaces
C64 ruckusSZSystemStatsWLANTotalTxFail	1.3.6.1.4.1.25053.1.4.1.1.1.15.11	Counter64	read-only	Total transmitted fail packets of wireless interfaces
C64 ruckusSZSystemStatsWLANTotalTxRetry	1.3.6.1.4.1.25053.1.4.1.1.1.15.12	Counter64	read-only	Total transmitted retry packets of wireless interfaces
STR ruckusSZSystemStatsSerialNumber	1.3.6.1.4.1.25053.1.4.1.1.1.15.13	DisplayString	read-only	Serial Number

RFC description

Ruckus SmartZone wireless controller system statistics including APs and authorized clients.

Start monitoring Ruckus SmartZone wireless LAN controllers (fleet-wide AP/station counts and traffic statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RUCKUS-SZ-SYSTEM-MIB