RUCKUS-SZ-WLAN-MIB

All MIBs › RUCKUS-SZ-WLAN-MIB

Organization: Ruckus Wireless, Inc.

Last Updated: 2014-05-19

Description: Ruckus SmartZone WLAN operational MIB monitoring per-WLAN entries and AP radio status on Ruckus SmartZone-managed wireless networks

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is RUCKUS-SZ-WLAN-MIB?

RUCKUS-SZ-WLAN-MIB is a Ruckus Wireless, Inc. proprietary MIB reporting per-WLAN and per-AP traffic/status detail on the Ruckus SmartZone (SZ) controller platform. Its objects cover a WLAN table (SSID, station count, RX/TX bytes, auth type, index) and an AP table (MAC, group, name, uptime, firmware version, model, serial number, IP address/type, external IP/port, station count, connection/registration/config status). As a status/performance MIB it lets an administrator confirm per-WLAN and per-AP traffic/status detail on a Ruckus SmartZone (SZ) controller deployment. It is deployed on Ruckus Wireless SmartZone (SZ) controller platforms. Engineers can download the RUCKUS-SZ-WLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in RUCKUS-SZ-WLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ruckus Wireless SmartZone (SZ) controller platforms

Monitoring Examples

An administrator reviews this MIB's objects to confirm per-WLAN and per-AP traffic/status detail on a Ruckus SmartZone (SZ) controller deployment.

What Can Be Monitored

per-WLAN and per-AP traffic/status detail

Imported Objects

From IANAifType-MIB

IANAifType

From RUCKUS-ROOT-MIB

ruckusSZWLANModule

OBJECT-IDENTITY

From RUCKUS-TC-MIB

RuckusAdminStatus
RuckusRadioMode
RuckusRateLimiting
RuckusSSID
RuckusdB

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using ruckusSZWLANRxBytes OID:

Select a Ruckus Wireless SmartZone (SZ) controller platform (per-WLAN/per-AP traffic and status detail) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ruckusSZWLANRxBytes into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total number of bytes received during the period. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ruckusSZWLANMIB	1.3.6.1.4.1.25053.1.4.2.1			Ruckus SZ WLAN MIB
ruckusSZWLANObjects	1.3.6.1.4.1.25053.1.4.2.1.1
ruckusSZWLANInfo	1.3.6.1.4.1.25053.1.4.2.1.1.1
ruckusSZWLANTable	1.3.6.1.4.1.25053.1.4.2.1.1.1.2		not-accessible	SZ WLAN table.
ruckusSZWLANEntry	1.3.6.1.4.1.25053.1.4.2.1.1.1.2.1		not-accessible	Specifies each SZ WLAN entry.
RUC ruckusSZWLANSSID	1.3.6.1.4.1.25053.1.4.2.1.1.1.2.1.1	RuckusSSID	read-only	SSID assciated with each WLAN and this represents the SSID belongs to WLAN.
U32 ruckusSZWLANNumSta	1.3.6.1.4.1.25053.1.4.2.1.1.1.2.1.12	Unsigned32	read-only	This represents number of client devices connected on each SSID & WLAN.
C64 ruckusSZWLANRxBytesEx	1.3.6.1.4.1.25053.1.4.2.1.1.1.2.1.14	Counter64	read-only	Total number of bytes received during the period.
C64 ruckusSZWLANTxBytes	1.3.6.1.4.1.25053.1.4.2.1.1.1.2.1.16	Counter64	read-only	Total number of bytes transmitted during the period.
STR ruckusSZWLANAuthType	1.3.6.1.4.1.25053.1.4.2.1.1.1.2.1.17	DisplayString	read-only	Authentication Type of WLAN device.
I32 ruckusSZWLANIndex	1.3.6.1.4.1.25053.1.4.2.1.1.1.2.1.99	Integer32	read-only	Identifies the specific WLAN ID in the SCG system.
ruckusSZWLANAPInfo	1.3.6.1.4.1.25053.1.4.2.1.1.2
ruckusSZAPTable	1.3.6.1.4.1.25053.1.4.2.1.1.2.2		not-accessible	The table records the AP information entries.
ruckusSZAPEntry	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1		not-accessible	Specifies the information of AP.
MAC ruckusSZAPMac	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.1	MacAddress	read-only	MAC address.
STR ruckusSZAPGroup	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.2	DisplayString	read-only	The WLAN Group of this AP.
STR ruckusSZAPName	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.5	DisplayString	read-only	Identify Name of this AP.
TIK ruckusSZAPUptime	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.6	TimeTicks	read-only	The time during which the AP was up during the period.
STR ruckusSZAPFWversion	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.7	DisplayString	read-only	Current firmware version of this AP.
STR ruckusSZAPModel	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.8	DisplayString	read-only	Model name of this AP.
STR ruckusSZAPSerial	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.9	DisplayString	read-only	Serial number of this AP.
IP ruckusSZAPIp	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.10	IpAddress	read-only	IP address assigned to the AP.
STR ruckusSZAPIPType	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.11	DisplayString	read-only	IP address type of this AP.
IP ruckusSZAPExtIp	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.12	IpAddress	read-only	External IP address of this AP.
U32 ruckusSZAPExtPort	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.13	Unsigned32	read-only	External Port.
U32 ruckusSZAPNumSta	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.15	Unsigned32	read-only	Number of concurrently connected clients on this AP.
STR ruckusSZAPConnStatus	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.16	DisplayString	read-only	Current connection Status of this AP.
STR ruckusSZAPRegStatus	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.17	DisplayString	read-only	Current registration Status of this AP.
STR ruckusSZAPConfigStatus	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.18	DisplayString	read-only	Configuration Status of this AP.
STR ruckusSZAPLocation	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.19	DisplayString	read-only	AP location info.
STR ruckusSZAPGPSInfo	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.20	DisplayString	read-only	GPS Information of this AP.
STR ruckusSZAPMeshRole	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.21	DisplayString	read-only	Mesh Role assigned to the AP.
STR ruckusSZAPDescription	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.22	DisplayString	read-only	Description of this AP.
C64 ruckusSZAPRXBytes	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.30	Counter64	read-only	Total number of bytes received during the period.
C64 ruckusSZAPTXBytes	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.31	Counter64	read-only	Total number of bytes transmitted during the period.
U32 ruckusSZAPIpsecSessionTime	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.50	Unsigned32	read-only	ipsec session time lasting, unit: seconds.
C64 ruckusSZAPIpsecTXPkts	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.55	Counter64	read-only	ipsec transmitted packet counts.
C64 ruckusSZAPIpsecRXPkts	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.56	Counter64	read-only	ipsec received packet counts.
C64 ruckusSZAPIpsecTXBytes	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.57	Counter64	read-only	ipsec transmitted byte counts.
C64 ruckusSZAPIpsecRXBytes	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.58	Counter64	read-only	ipsec received byte counts.
C64 ruckusSZAPIpsecTXPktsDropped	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.59	Counter64	read-only	ipsec transmitted dropped packet counts.
C64 ruckusSZAPIpsecRXPktsDropped	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.60	Counter64	read-only	ipsec received dropped packet counts.
U32 ruckusSZAPIpsecTXIdleTime	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.65	Unsigned32	read-only	In seconds since last seen transmitted packet.
U32 ruckusSZAPIpsecRXIdleTime	1.3.6.1.4.1.25053.1.4.2.1.1.2.2.1.66	Unsigned32	read-only	In seconds since last seen received packet.

RFC description

Ruckus SZ SmartZone WLAN management for wireless network configuration. Provides access point information and WLAN table management.

Start monitoring Ruckus Wireless SmartZone (SZ) controller platforms (per-WLAN/per-AP traffic and status detail) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download RUCKUS-SZ-WLAN-MIB