All MIBs › RED-LION-RAM-MIB
Category: Environmental Monitoring
Description: Manages Red Lion Controls RAM (Remote Access Module) industrial networking device configuration and status.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is RED-LION-RAM-MIB?
RED-LION-RAM-MIB is a Red Lion Controls enterprise MIB for the RAM (Remote Access Module), a cellular/industrial networking gateway used to provide remote connectivity for industrial automation and M2M devices. It exposes unit identity and software version information (serial number, firmware version, unit name/description) alongside cellular-specific parameters such as MDN, MIN/IMEI, NAI, SID, NID, and PRL that describe the device's cellular network registration and activation state. For monitoring, it is primarily used to confirm the cellular modem's software version and activation/registration status -- checking unitFirmwareVersion for version audits and the activated flag alongside sid/nid to confirm the unit is properly registered on the cellular network, which is critical since loss of cellular registration means loss of the entire remote link. As a compact vendor enterprise MIB it has no significant dependency on external standard MIBs. It is deployed on Red Lion RAM cellular gateways at remote/unattended industrial sites (e.g., pump stations, remote sensors) where cellular connectivity is the primary or backup WAN link. Engineers can download the RED-LION-RAM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in RED-LION-RAM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Red Lion RAM (Remote Access Module) cellular gateway
- industrial M2M cellular router
Monitoring Examples
An administrator would poll unitFirmwareVersion and unitSerialNumber to audit device software versions across a fleet of remote RAM units, and check the activated flag together with sid (system ID) and nid (network ID) to confirm a unit remains properly registered on the carrier's cellular network. A change in prl (preferred roaming list) or an unactivated state would indicate a provisioning problem preventing cellular connectivity, effectively isolating that remote site until resolved. mdn and minIMEI identify the specific subscriber unit for correlation with the carrier's records.
What Can Be Monitored
- unit firmware version
- unit serial number
- cellular activation/registration status
- SIM/MIN/IMEI identifiers
- system ID/network ID
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| redlionram | 1.3.6.1.4.1.1890 | |||
| system | 1.3.6.1.4.1.1890.1 | |||
| unitInfo | 1.3.6.1.4.1.1890.1.1 | |||
| STR unitDescription | 1.3.6.1.4.1.1890.1.1.1 | DisplayString | read-only | Model Name (e.g. SN6600). DEFAULT: UNKNOWN |
| STR unitSerialNumber | 1.3.6.1.4.1.1890.1.1.2 | DisplayString | read-only | Serial Number (e.g. 6621-2517560325). DEFAULT: UNKNOWN |
| STR unitFirmwareVersion | 1.3.6.1.4.1.1890.1.1.3 | DisplayString | read-only | Firmware Version Number (e.g. v3.04rc33). DEFAULT: UNKNOWN |
| STR unitName | 1.3.6.1.4.1.1890.1.1.4 | DisplayString | read-only | Unit Name (e.g. RAM-0647e3 or User Prefered Name via GUI Access Settings). DEFAULT: UNKNOWN |
| cellular | 1.3.6.1.4.1.1890.1.2 | |||
| STR mdn | 1.3.6.1.4.1.1890.1.2.1 | DisplayString | read-only | Cellular Mobile Directory Number (e.g. (xxx)xxx-xxxx). DEFAULT: UNKNOWN |
| STR minIMEI | 1.3.6.1.4.1.1890.1.2.2 | DisplayString | read-only | Cellular Intl Mobile Equipment Identifier DEFAULT: UNKNOWN |
| STR nai | 1.3.6.1.4.1.1890.1.2.3 | DisplayString | read-only | Cellular Network Acces Identifier. DEFAULT: UNKNOWN |
| INT sipUser | 1.3.6.1.4.1.1890.1.2.4 | INTEGER | read-only | Cellular Session Initiation Protocol User. DEFAULT: -1 |
| INT sid | 1.3.6.1.4.1.1890.1.2.5 | INTEGER | read-only | Cellular System ID. DEFAULT: -1 |
| INT nid | 1.3.6.1.4.1.1890.1.2.6 | INTEGER | read-only | Cellular Network Identifier. DEFAULT: -1 |
| INT prl | 1.3.6.1.4.1.1890.1.2.7 | INTEGER | read-only | Cellular Preferred Roaming List. DEFAULT: -1 |
| INT activated | 1.3.6.1.4.1.1890.1.2.8 | INTEGER | read-only | Cellular module activation status. DEFAULT: -1 |
| INT omaSupported | 1.3.6.1.4.1.1890.1.2.9 | INTEGER | read-only | Cellular OMA Supported status. DEFAULT: -1 |
| INT currentMipProfile | 1.3.6.1.4.1.1890.1.2.10 | INTEGER | read-only | Cellular Mobile IP Profile. DEFAULT: -1 |
| STR esn | 1.3.6.1.4.1.1890.1.2.11 | DisplayString | read-only | Cellular Module Electronic Serial Number. DEFAULT: UNKNOWN |
| STR pesn | 1.3.6.1.4.1.1890.1.2.12 | DisplayString | read-only | Cellular Module Pseudo ESN. DEFAULT: UNKNOWN |
| STR meid | 1.3.6.1.4.1.1890.1.2.13 | DisplayString | read-only | Cellular Mobile Equipment Identifier. DEFAULT: UNKNOWN |
| STR vendor | 1.3.6.1.4.1.1890.1.2.14 | DisplayString | read-only | Cellular Module manufacturer. DEFAULT: UNKNOWN |
| STR modelName | 1.3.6.1.4.1.1890.1.2.15 | DisplayString | read-only | The vendor-provided model name of the modem/card/module (e.g. sierra598U). DEFAULT: UNKNOWN |
| STR fwVersion | 1.3.6.1.4.1.1890.1.2.16 | DisplayString | read-only | Cellular Module Firmware version #. DEFAULT: UNKNOWN |
| STR hwVersion | 1.3.6.1.4.1.1890.1.2.17 | DisplayString | read-only | Cellular Module hardware version #. DEFAULT: UNKNOWN |
| STR carrier | 1.3.6.1.4.1.1890.1.2.18 | DisplayString | read-only | Cellular Service Provider. DEFAULT: UNKNOWN |
| INT lowRssi | 1.3.6.1.4.1.1890.1.2.19 | INTEGER | read-only | Cellular Low Speed received signal strenth indication. DEFAULT: 0 |
| INT lowEcio | 1.3.6.1.4.1.1890.1.2.20 | INTEGER | read-only | Cellular Low Speed EC/IO. DEFAULT: 0 |
| INT highRssi | 1.3.6.1.4.1.1890.1.2.21 | INTEGER | read-only | Cellular High Speed received signal strenth indication. DEFAULT: 0 |
| INT highEcio | 1.3.6.1.4.1.1890.1.2.22 | INTEGER | read-only | Cellular High Speed EC/IO. DEFAULT: 0 |
| INT currentRssi | 1.3.6.1.4.1.1890.1.2.23 | INTEGER | read-only | Cellular Current Received Signal Strenth Indication. DEFAULT: 0 |
| INT currentEcio | 1.3.6.1.4.1.1890.1.2.24 | INTEGER | read-only | Cellular Current EC/IO. DEFAULT: 0 |
| STR svcType | 1.3.6.1.4.1.1890.1.2.25 | DisplayString | read-only | Cellular Service Type. DEFAULT: UNKNOWN |
| INT currentChannel | 1.3.6.1.4.1.1890.1.2.29 | INTEGER | read-only | Cellular Channel. DEFAULT: -1 |
| STR cdmaType | 1.3.6.1.4.1.1890.1.2.30 | DisplayString | read-only | Cellular CDMA Type (e.g. None, Analog, Digital). DEFAULT: UNKNOWN |
| STR hdrType | 1.3.6.1.4.1.1890.1.2.31 | DisplayString | read-only | Cellular HDR (e.g. Unknown, None, Rev0, RevA). DEFAULT: UNKNOWN |
| STR cdmaRoaming | 1.3.6.1.4.1.1890.1.2.32 | DisplayString | read-only | Cellular Roaming indicator - CDMA. DEFAULT: UNKNOWN |
| STR hdrRoaming | 1.3.6.1.4.1.1890.1.2.33 | DisplayString | read-only | Cellular Roaming indicator - EVDO. DEFAULT: UNKNOWN |
| INT roaming | 1.3.6.1.4.1.1890.1.2.34 | INTEGER | read-only | Cellular current roaming status. DEFAULT: -1 |
| INT currentState | 1.3.6.1.4.1.1890.1.2.35 | INTEGER | read-only | Cellular state (e.g. connecting, dormant, connected, disconnected, error, callincoming). DEFAULT: -1 |
| STR speedPref | 1.3.6.1.4.1.1890.1.2.36 | DisplayString | read-only | Cellular Module speed pref. DEFAULT: UNKNOWN |
| STR roamPref | 1.3.6.1.4.1.1890.1.2.37 | DisplayString | read-only | Cellular Module roaming pref. DEFAULT: UNKNOWN |
| STR devName | 1.3.6.1.4.1.1890.1.2.38 | DisplayString | read-only | The device name as presented by the operating system (e.g. /dev/ttyUSB0). DEFAULT: UNKNOWN |
| STR ifName | 1.3.6.1.4.1.1890.1.2.39 | DisplayString | read-only | The cellular interface name, if known, as presented by the operating system (e.g. ppp0). DEFAULT: UNKNOWN |
| INT txCount | 1.3.6.1.4.1.1890.1.2.40 | INTEGER | read-only | Cellular Module TX Byte Count, updated every 30 mins. DEFAULT: -1 |
| INT rxCount | 1.3.6.1.4.1.1890.1.2.41 | INTEGER | read-only | Cellular Module RX Byte Count, updated every 30 mins.. DEFAULT: -1 |
| STR gprsState | 1.3.6.1.4.1.1890.1.2.42 | DisplayString | read-only | Cellular GPRS State. DEFAULT: UNKNOWN |
| STR rxLevel | 1.3.6.1.4.1.1890.1.2.43 | DisplayString | read-only | Cellular RX Level. DEFAULT: UNKNOWN |
| STR servingCell | 1.3.6.1.4.1.1890.1.2.44 | DisplayString | read-only | Cellular Serving Cell. DEFAULT: UNKNOWN |
| STR rccState | 1.3.6.1.4.1.1890.1.2.45 | DisplayString | read-only | Cellular RCC State. DEFAULT: UNKNOWN |
| STR gsmChannel | 1.3.6.1.4.1.1890.1.2.46 | DisplayString | read-only | Cellular GSM Channel. DEFAULT: UNKNOWN |
| STR psState | 1.3.6.1.4.1.1890.1.2.47 | DisplayString | read-only | Cellular PS State. DEFAULT: UNKNOWN |
| STR mode | 1.3.6.1.4.1.1890.1.2.48 | DisplayString | read-only | Cellular Mode. DEFAULT: UNKNOWN |
| STR temperature | 1.3.6.1.4.1.1890.1.2.49 | DisplayString | read-only | Cellular Module Temp (not available on all modules). DEFAULT: UNKNOWN |
| STR simContextApn0 | 1.3.6.1.4.1.1890.1.2.50 | DisplayString | read-only | Cellular SIM APN 0. DEFAULT: UNKNOWN |
| STR simContextApn1 | 1.3.6.1.4.1.1890.1.2.51 | DisplayString | read-only | Cellular SIM APN 1. DEFAULT: UNKNOWN |
| STR simStatus | 1.3.6.1.4.1.1890.1.2.52 | DisplayString | read-only | Cellular SIM Status. DEFAULT: UNKNOWN |
| STR serviceDomain | 1.3.6.1.4.1.1890.1.2.53 | DisplayString | read-only | Cellular Service Domain. DEFAULT: UNKNOWN |
| STR availServiceType | 1.3.6.1.4.1.1890.1.2.54 | DisplayString | read-only | Cellular Available Service Type. DEFAULT: UNKNOWN |
| STR wCdmaL1State | 1.3.6.1.4.1.1890.1.2.55 | DisplayString | read-only | Cellular WCDMA L1 State. DEFAULT: UNKNOWN |
| STR mmcsState | 1.3.6.1.4.1.1890.1.2.56 | DisplayString | read-only | Cellular MM CS State. DEFAULT: UNKNOWN |
| STR gmmPsState | 1.3.6.1.4.1.1890.1.2.57 | DisplayString | read-only | Cellular GMM PS State. DEFAULT: UNKNOWN |
| STR wCdmaChannel | 1.3.6.1.4.1.1890.1.2.58 | DisplayString | read-only | Cellular WCDMA Channel. DEFAULT: UNKNOWN |
| STR wCdmaBand | 1.3.6.1.4.1.1890.1.2.59 | DisplayString | read-only | Cellular WCDMA Band. DEFAULT: UNKNOWN |
| STR systemMode | 1.3.6.1.4.1.1890.1.2.60 | DisplayString | read-only | Cellular System Mode. DEFAULT: UNKNOWN |
| STR powerOnTime | 1.3.6.1.4.1.1890.1.2.61 | DisplayString | read-only | Cellular Power On Time. DEFAULT: UNKNOWN |
| STR lowSpeedCsq | 1.3.6.1.4.1.1890.1.2.62 | DisplayString | read-only | Cellular Low Speed CSQ. DEFAULT: UNKNOWN |
| STR highSpeedCsq | 1.3.6.1.4.1.1890.1.2.63 | DisplayString | read-only | Cellular High Speed CSQ. DEFAULT: UNKNOWN |
| STR band | 1.3.6.1.4.1.1890.1.2.64 | DisplayString | read-only | Cellular Band. DEFAULT: UNKNOWN |
| STR imei | 1.3.6.1.4.1.1890.1.2.65 | DisplayString | read-only | Cellular IMEI. DEFAULT: UNKNOWN |
| STR simId | 1.3.6.1.4.1.1890.1.2.66 | DisplayString | read-only | Cellular SIM ID. DEFAULT: UNKNOWN |
| STR carrPLMN | 1.3.6.1.4.1.1890.1.2.67 | DisplayString | read-only | Carrier PLMN... DEFAULT: UNKNOWN |
| STR rxLevelC0 | 1.3.6.1.4.1.1890.1.2.68 | DisplayString | read-only | Receive Level C0... DEFAULT: UNKNOWN |
| STR rxLevelC1 | 1.3.6.1.4.1.1890.1.2.69 | DisplayString | read-only | Receive Level C1... DEFAULT: UNKNOWN |
| STR locAreaCode | 1.3.6.1.4.1.1890.1.2.70 | DisplayString | read-only | Location Area Code... DEFAULT: UNKNOWN |
| STR lteBand | 1.3.6.1.4.1.1890.1.2.71 | DisplayString | read-only | LTE Band... DEFAULT: UNKNOWN |
| STR lteRxChan | 1.3.6.1.4.1.1890.1.2.72 | DisplayString | read-only | LTE Receive Channel... DEFAULT: UNKNOWN |
| STR lteTxChan | 1.3.6.1.4.1.1890.1.2.73 | DisplayString | read-only | LTE Transmit Channel... DEFAULT: UNKNOWN |
| STR lteBW | 1.3.6.1.4.1.1890.1.2.74 | DisplayString | read-only | LTE Bandwidth... DEFAULT: UNKNOWN |
| STR lteRSRP | 1.3.6.1.4.1.1890.1.2.75 | DisplayString | read-only | LTE Reference Signal Received Power... DEFAULT: UNKNOWN |
| STR lteRSRQ | 1.3.6.1.4.1.1890.1.2.76 | DisplayString | read-only | LTE Reference Signal Received Quality... DEFAULT: UNKNOWN |
| STR lteTracAreaCode | 1.3.6.1.4.1.1890.1.2.77 | DisplayString | read-only | LTE Trac Area Code... DEFAULT: UNKNOWN |
| STR creg | 1.3.6.1.4.1.1890.1.2.78 | DisplayString | read-only | Cellmodem CREG Not registered, Searching... DEFAULT: UNKNOWN |
| INT cellularUpTime | 1.3.6.1.4.1.1890.1.2.79 | INTEGER | read-only | Cellular Up Time in Seconds, DEFAULT: -1 |
| INT lteRSRPint | 1.3.6.1.4.1.1890.1.2.80 | INTEGER | read-only | LTE Reference Signal Received Power in Integer... DEFAULT: -1 |
| INT lteRSRQint | 1.3.6.1.4.1.1890.1.2.81 | INTEGER | read-only | LTE Reference Signal Received Quality in Integer... DEFAULT: -1 |
| INT lteSINRint | 1.3.6.1.4.1.1890.1.2.82 | INTEGER | read-only | LTE Signal to Interference Plus Noise Ratio in Integer... DEFAULT: -1 |
| trafficppp0 | 1.3.6.1.4.1.1890.1.3 | |||
| STR todayRxPpp0 | 1.3.6.1.4.1.1890.1.3.1 | DisplayString | read-only | Vnstat Today Rx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR todayTxPpp0 | 1.3.6.1.4.1.1890.1.3.2 | DisplayString | read-only | Vnstat Today Tx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR todayTotalPpp0 | 1.3.6.1.4.1.1890.1.3.3 | DisplayString | read-only | Vnstat Today Total Rx/Tx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR yesterdayRxPpp0 | 1.3.6.1.4.1.1890.1.3.4 | DisplayString | read-only | Vnstat Yesterday Rx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR yesterdayTxPpp0 | 1.3.6.1.4.1.1890.1.3.5 | DisplayString | read-only | Vnstat Yesterday Tx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR yesterdayTotalPpp0 | 1.3.6.1.4.1.1890.1.3.6 | DisplayString | read-only | Vnstat Yesterday Total Rx/Tx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR currMonthRxPpp0 | 1.3.6.1.4.1.1890.1.3.7 | DisplayString | read-only | Vnstat Current Month Rx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR currMonthTxPpp0 | 1.3.6.1.4.1.1890.1.3.8 | DisplayString | read-only | Vnstat Current Month Tx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR currMonthTotalPpp0 | 1.3.6.1.4.1.1890.1.3.9 | DisplayString | read-only | Vnstat Current Month Total Rx/Tx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR preMonthRxPpp0 | 1.3.6.1.4.1.1890.1.3.10 | DisplayString | read-only | Vnstat Previous Month Rx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR preMonthTxPpp0 | 1.3.6.1.4.1.1890.1.3.11 | DisplayString | read-only | Vnstat Previous Month Tx for PPP0 Interface... DEFAULT: UNKNOWN |
| STR preMonthTotalPpp0 | 1.3.6.1.4.1.1890.1.3.12 | DisplayString | read-only | Vnstat Previous Month Total Rx/Tx for PPP0 Interface... DEFAULT: UNKNOWN |
| INT todayRxPpp0Kib | 1.3.6.1.4.1.1890.1.3.13 | INTEGER | read-only | Vnstat Today Rx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT todayTxPpp0Kib | 1.3.6.1.4.1.1890.1.3.14 | INTEGER | read-only | Vnstat Today Tx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT todayTotalPpp0Kib | 1.3.6.1.4.1.1890.1.3.15 | INTEGER | read-only | Vnstat Today Total Rx/Tx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT yesterdayRxPpp0Kib | 1.3.6.1.4.1.1890.1.3.16 | INTEGER | read-only | Vnstat Yesterday Rx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT yesterdayTxPpp0Kib | 1.3.6.1.4.1.1890.1.3.17 | INTEGER | read-only | Vnstat Yesterday Tx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT yesterdayTotalPpp0Kib | 1.3.6.1.4.1.1890.1.3.18 | INTEGER | read-only | Vnstat Yesterday Total Rx/Tx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT currMonthRxPpp0Kib | 1.3.6.1.4.1.1890.1.3.19 | INTEGER | read-only | Vnstat Current Month Rx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT currMonthTxPpp0Kib | 1.3.6.1.4.1.1890.1.3.20 | INTEGER | read-only | Vnstat Current Month Tx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT currMonthTotalPpp0Kib | 1.3.6.1.4.1.1890.1.3.21 | INTEGER | read-only | Vnstat Current Month Total Rx/Tx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT preMonthRxPpp0Kib | 1.3.6.1.4.1.1890.1.3.22 | INTEGER | read-only | Vnstat Previous Month Rx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT preMonthTxPpp0Kib | 1.3.6.1.4.1.1890.1.3.23 | INTEGER | read-only | Vnstat Previous Month Tx for PPP0 Interface in Kib... DEFAULT: -1 |
| INT preMonthTotalPpp0Kib | 1.3.6.1.4.1.1890.1.3.24 | INTEGER | read-only | Vnstat Previous Month Total Rx/Tx for PPP0 Interface in Kib... DEFAULT: -1 |
| trafficwwan0 | 1.3.6.1.4.1.1890.1.4 | |||
| STR todayRxWwan0 | 1.3.6.1.4.1.1890.1.4.1 | DisplayString | read-only | Vnstat Today Rx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR todayTxWwan0 | 1.3.6.1.4.1.1890.1.4.2 | DisplayString | read-only | Vnstat Today Tx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR todayTotalWwan0 | 1.3.6.1.4.1.1890.1.4.3 | DisplayString | read-only | Vnstat Today Total Rx/Tx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR yesterdayRxWwan0 | 1.3.6.1.4.1.1890.1.4.4 | DisplayString | read-only | Vnstat Yesterday Rx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR yesterdayTxWwan0 | 1.3.6.1.4.1.1890.1.4.5 | DisplayString | read-only | Vnstat Yesterday Tx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR yesterdayTotalWwan0 | 1.3.6.1.4.1.1890.1.4.6 | DisplayString | read-only | Vnstat Yesterday Total Rx/Tx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR currMonthRxWwan0 | 1.3.6.1.4.1.1890.1.4.7 | DisplayString | read-only | Vnstat Current Month Rx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR currMonthTxWwan0 | 1.3.6.1.4.1.1890.1.4.8 | DisplayString | read-only | Vnstat Current Month Tx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR currMonthTotalWwan0 | 1.3.6.1.4.1.1890.1.4.9 | DisplayString | read-only | Vnstat Current Month Total Rx/Tx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR preMonthRxWwan0 | 1.3.6.1.4.1.1890.1.4.10 | DisplayString | read-only | Vnstat Previous Month Rx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR preMonthTxWwan0 | 1.3.6.1.4.1.1890.1.4.11 | DisplayString | read-only | Vnstat Previous Month Tx for WWAN0 Interface... DEFAULT: UNKNOWN |
| STR preMonthTotalWwan0 | 1.3.6.1.4.1.1890.1.4.12 | DisplayString | read-only | Vnstat Previous Month Total Rx/Tx for WWAN0 Interface... DEFAULT: UNKNOWN |
| INT todayRxWwan0Kib | 1.3.6.1.4.1.1890.1.4.13 | INTEGER | read-only | Vnstat Today Rx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT todayTxWwan0Kib | 1.3.6.1.4.1.1890.1.4.14 | INTEGER | read-only | Vnstat Today Tx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT todayTotalWwan0Kib | 1.3.6.1.4.1.1890.1.4.15 | INTEGER | read-only | Vnstat Today Total Rx/Tx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT yesterdayRxWwan0Kib | 1.3.6.1.4.1.1890.1.4.16 | INTEGER | read-only | Vnstat Yesterday Rx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT yesterdayTxWwan0Kib | 1.3.6.1.4.1.1890.1.4.17 | INTEGER | read-only | Vnstat Yesterday Tx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT yesterdayTotalWwan0Kib | 1.3.6.1.4.1.1890.1.4.18 | INTEGER | read-only | Vnstat Yesterday Total Rx/Tx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT currMonthRxWwan0Kib | 1.3.6.1.4.1.1890.1.4.19 | INTEGER | read-only | Vnstat Current Month Rx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT currMonthTxWwan0Kib | 1.3.6.1.4.1.1890.1.4.20 | INTEGER | read-only | Vnstat Current Month Tx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT currMonthTotalWwan0Kib | 1.3.6.1.4.1.1890.1.4.21 | INTEGER | read-only | Vnstat Current Month Total Rx/Tx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT preMonthRxWwan0Kib | 1.3.6.1.4.1.1890.1.4.22 | INTEGER | read-only | Vnstat Previous Month Rx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT preMonthTxWwan0Kib | 1.3.6.1.4.1.1890.1.4.23 | INTEGER | read-only | Vnstat Previous Month Tx for WWAN0 Interface in Kib... DEFAULT: -1 |
| INT preMonthTotalWwan0Kib | 1.3.6.1.4.1.1890.1.4.24 | INTEGER | read-only | Vnstat Previous Month Total Rx/Tx for WWAN0 Interface in Kib... DEFAULT: -1 |
| trafficeth0 | 1.3.6.1.4.1.1890.1.5 | |||
| STR todayRxEth0 | 1.3.6.1.4.1.1890.1.5.1 | DisplayString | read-only | Vnstat Today Rx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR todayTxEth0 | 1.3.6.1.4.1.1890.1.5.2 | DisplayString | read-only | Vnstat Today Tx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR todayTotalEth0 | 1.3.6.1.4.1.1890.1.5.3 | DisplayString | read-only | Vnstat Today Total Rx/Tx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR yesterdayRxEth0 | 1.3.6.1.4.1.1890.1.5.4 | DisplayString | read-only | Vnstat Yesterday Rx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR yesterdayTxEth0 | 1.3.6.1.4.1.1890.1.5.5 | DisplayString | read-only | Vnstat Yesterday Tx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR yesterdayTotalEth0 | 1.3.6.1.4.1.1890.1.5.6 | DisplayString | read-only | Vnstat Yesterday Total Rx/Tx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR currMonthRxEth0 | 1.3.6.1.4.1.1890.1.5.7 | DisplayString | read-only | Vnstat Current Month Rx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR currMonthTxEth0 | 1.3.6.1.4.1.1890.1.5.8 | DisplayString | read-only | Vnstat Current Month Tx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR currMonthTotalEth0 | 1.3.6.1.4.1.1890.1.5.9 | DisplayString | read-only | Vnstat Current Month Total Rx/Tx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR preMonthRxEth0 | 1.3.6.1.4.1.1890.1.5.10 | DisplayString | read-only | Vnstat Previous Month Rx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR preMonthTxEth0 | 1.3.6.1.4.1.1890.1.5.11 | DisplayString | read-only | Vnstat Previous Month Tx for Eth0 Interface... DEFAULT: UNKNOWN |
| STR preMonthTotalEth0 | 1.3.6.1.4.1.1890.1.5.12 | DisplayString | read-only | Vnstat Previous Month Total Rx/Tx for Eth0 Interface... DEFAULT: UNKNOWN |
| INT todayRxEth0Kib | 1.3.6.1.4.1.1890.1.5.13 | INTEGER | read-only | Vnstat Today Rx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT todayTxEth0Kib | 1.3.6.1.4.1.1890.1.5.14 | INTEGER | read-only | Vnstat Today Tx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT todayTotalEth0Kib | 1.3.6.1.4.1.1890.1.5.15 | INTEGER | read-only | Vnstat Today Total Rx/Tx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT yesterdayRxEth0Kib | 1.3.6.1.4.1.1890.1.5.16 | INTEGER | read-only | Vnstat Yesterday Rx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT yesterdayTxEth0Kib | 1.3.6.1.4.1.1890.1.5.17 | INTEGER | read-only | Vnstat Yesterday Tx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT yesterdayTotalEth0Kib | 1.3.6.1.4.1.1890.1.5.18 | INTEGER | read-only | Vnstat Yesterday Total Rx/Tx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT currMonthRxEth0Kib | 1.3.6.1.4.1.1890.1.5.19 | INTEGER | read-only | Vnstat Current Month Rx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT currMonthTxEth0Kib | 1.3.6.1.4.1.1890.1.5.20 | INTEGER | read-only | Vnstat Current Month Tx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT currMonthTotalEth0Kib | 1.3.6.1.4.1.1890.1.5.21 | INTEGER | read-only | Vnstat Current Month Total Rx/Tx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT preMonthRxEth0Kib | 1.3.6.1.4.1.1890.1.5.22 | INTEGER | read-only | Vnstat Previous Month Rx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT preMonthTxEth0Kib | 1.3.6.1.4.1.1890.1.5.23 | INTEGER | read-only | Vnstat Previous Month Tx for ETH0 Interface in Kib... DEFAULT: -1 |
| INT preMonthTotalEth0Kib | 1.3.6.1.4.1.1890.1.5.24 | INTEGER | read-only | Vnstat Previous Month Total Rx/Tx for ETH0 Interface in Kib... DEFAULT: -1 |
| trafficeth1 | 1.3.6.1.4.1.1890.1.6 | |||
| STR todayRxEth1 | 1.3.6.1.4.1.1890.1.6.1 | DisplayString | read-only | Vnstat Today Rx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR todayTxEth1 | 1.3.6.1.4.1.1890.1.6.2 | DisplayString | read-only | Vnstat Today Tx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR todayTotalEth1 | 1.3.6.1.4.1.1890.1.6.3 | DisplayString | read-only | Vnstat Today Total Rx/Tx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR yesterdayRxEth1 | 1.3.6.1.4.1.1890.1.6.4 | DisplayString | read-only | Vnstat Yesterday Rx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR yesterdayTxEth1 | 1.3.6.1.4.1.1890.1.6.5 | DisplayString | read-only | Vnstat Yesterday Tx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR yesterdayTotalEth1 | 1.3.6.1.4.1.1890.1.6.6 | DisplayString | read-only | Vnstat Yesterday Total Rx/Tx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR currMonthRxEth1 | 1.3.6.1.4.1.1890.1.6.7 | DisplayString | read-only | Vnstat Current Month Rx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR currMonthTxEth1 | 1.3.6.1.4.1.1890.1.6.8 | DisplayString | read-only | Vnstat Current Month Tx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR currMonthTotalEth1 | 1.3.6.1.4.1.1890.1.6.9 | DisplayString | read-only | Vnstat Current Month Total Rx/Tx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR preMonthRxEth1 | 1.3.6.1.4.1.1890.1.6.10 | DisplayString | read-only | Vnstat Previous Month Rx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR preMonthTxEth1 | 1.3.6.1.4.1.1890.1.6.11 | DisplayString | read-only | Vnstat Previous Month Tx for Eth1 Interface... DEFAULT: UNKNOWN |
| STR preMonthTotalEth1 | 1.3.6.1.4.1.1890.1.6.12 | DisplayString | read-only | Vnstat Previous Month Total Rx/Tx for Eth1 Interface... DEFAULT: UNKNOWN |
| INT todayRxEth1Kib | 1.3.6.1.4.1.1890.1.6.13 | INTEGER | read-only | Vnstat Today Rx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT todayTxEth1Kib | 1.3.6.1.4.1.1890.1.6.14 | INTEGER | read-only | Vnstat Today Tx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT todayTotalEth1Kib | 1.3.6.1.4.1.1890.1.6.15 | INTEGER | read-only | Vnstat Today Total Rx/Tx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT yesterdayRxEth1Kib | 1.3.6.1.4.1.1890.1.6.16 | INTEGER | read-only | Vnstat Yesterday Rx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT yesterdayTxEth1Kib | 1.3.6.1.4.1.1890.1.6.17 | INTEGER | read-only | Vnstat Yesterday Tx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT yesterdayTotalEth1Kib | 1.3.6.1.4.1.1890.1.6.18 | INTEGER | read-only | Vnstat Yesterday Total Rx/Tx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT currMonthRxEth1Kib | 1.3.6.1.4.1.1890.1.6.19 | INTEGER | read-only | Vnstat Current Month Rx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT currMonthTxEth1Kib | 1.3.6.1.4.1.1890.1.6.20 | INTEGER | read-only | Vnstat Current Month Tx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT currMonthTotalEth1Kib | 1.3.6.1.4.1.1890.1.6.21 | INTEGER | read-only | Vnstat Current Month Total Rx/Tx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT preMonthRxEth1Kib | 1.3.6.1.4.1.1890.1.6.22 | INTEGER | read-only | Vnstat Previous Month Rx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT preMonthTxEth1Kib | 1.3.6.1.4.1.1890.1.6.23 | INTEGER | read-only | Vnstat Previous Month Tx for ETH1 Interface in Kib... DEFAULT: -1 |
| INT preMonthTotalEth1Kib | 1.3.6.1.4.1.1890.1.6.24 | INTEGER | read-only | Vnstat Previous Month Total Rx/Tx for ETH1 Interface in Kib... DEFAULT: -1 |
| gpscurrent | 1.3.6.1.4.1.1890.1.7 | |||
| STR currentGpsValid | 1.3.6.1.4.1.1890.1.7.1 | DisplayString | read-only | GPS Current Valid Fixed Quality (0 = Invalid, 1 = Valid)... DEFAULT: UNKNOWN |
| STR currentGpsLat | 1.3.6.1.4.1.1890.1.7.2 | DisplayString | read-only | GPS Current Latitude Degrees ... DEFAULT: UNKNOWN |
| STR currentGpsLong | 1.3.6.1.4.1.1890.1.7.3 | DisplayString | read-only | GPS Current Longitude Degrees ... DEFAULT: UNKNOWN |
| STR currentGpsAlt | 1.3.6.1.4.1.1890.1.7.4 | DisplayString | read-only | GPS Current Altitude Tenths of Meter(280.2 = 2802) ... DEFAULT: UNKNOWN |
| STR currentGpsTimeStamp | 1.3.6.1.4.1.1890.1.7.5 | DisplayString | read-only | GPS Current Time Stamp ... DEFAULT: UNKNOWN |
| STR currentGpsNumSat | 1.3.6.1.4.1.1890.1.7.6 | DisplayString | read-only | GPS Current Number of Satellites ... DEFAULT: UNKNOWN |
| STR currentGpsFtfromcp | 1.3.6.1.4.1.1890.1.7.7 | DisplayString | read-only | GPS Current Feet From Lockdown Center Point ... DEFAULT: UNKNOWN |
| STR currentGpsSpeed | 1.3.6.1.4.1.1890.1.7.8 | DisplayString | read-only | GPS Current Speed, SOG tenths of knots (50.1 = 501)... DEFAULT: UNKNOWN |
| STR currentGpsCourse | 1.3.6.1.4.1.1890.1.7.9 | DisplayString | read-only | GPS Current Course, Heading in tenths of degree(280.3 = 2803)... DEFAULT: UNKNOWN |
| STR gpsSource | 1.3.6.1.4.1.1890.1.7.10 | DisplayString | read-only | GPS Source of Data (1=Internal; 3=Fixed)... DEFAULT: UNKNOWN |
| STR gpsLockdownState | 1.3.6.1.4.1.1890.1.7.11 | DisplayString | read-only | GPS Current Lockdown State (0 = Monitor; 5 = Lockdown; 7-9 = Violation)... DEFAULT: UNKNOWN |
| STR gpsLockdownRadius | 1.3.6.1.4.1.1890.1.7.12 | DisplayString | read-only | GPS Current Lockdown Radius (ft), Units in Feet as calculated from centerpoint... DEFAULT: UNKNOWN |
RFC description
Monitors Remote Access Module health and connectivity including cellular, Ethernet, VRRP, traffic stats, and GPS data.
Start monitoring Red Lion RAM (Remote Access Module) cellular gateway, industrial M2M cellular router (firmware/cellular registration status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.