All MIBs › RED-LION-RAM-MIB › wCdmaL1State
wCdmaL1State
Module: RED-LION-RAM-MIB
OID (symbolic): RED-LION-RAM-MIB::wCdmaL1State
OID (numeric): 1.3.6.1.4.1.1890.1.2.55
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: Cellular WCDMA L1 State. DEFAULT: UNKNOWN
What is wCdmaL1State?
Reports the Layer 1 (physical radio layer) state of the modem's WCDMA/UMTS connection. It's a low-level diagnostic value mainly useful to a carrier or vendor support engineer investigating a stubborn UMTS connectivity problem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1890.1.2.55 snmpwalk -v2c -c public <target> RED-LION-RAM-MIB::wCdmaL1State
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1890.1.2.55.1 snmpget -v2c -c public <target> RED-LION-RAM-MIB::wCdmaL1State.1
Start monitoring Red Lion RAM (Remote Access Module) cellular gateway, industrial M2M cellular router (firmware/cellular registration status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RED-LION-RAM-MIB::wCdmaL1State OID value, configure state conditions and alerts, and monitor any Red Lion RAM (Remote Access Module) cellular gateway, industrial M2M cellular router (firmware/cellular registration status) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1890 | redlionram | RED-LION-RAM-MIB |
| 1.3.6.1.4.1.1890.1 | system | RED-LION-RAM-MIB |
| 1.3.6.1.4.1.1890.1.2 | cellular | RED-LION-RAM-MIB |
| 1.3.6.1.4.1.1890.1.2.55 | wCdmaL1State | RED-LION-RAM-MIB |