RAISECOM-OSPF-MIB :: rcOspfIfMd5AuthAddressLessIf

MIB Reference — IPNetwork Monitor · Updated September 21, 2026

All MIBs › RAISECOM-OSPF-MIB › rcOspfIfMd5AuthAddressLessIf

rcOspfIfMd5AuthAddressLessIf

Module: RAISECOM-OSPF-MIB

OID (symbolic): RAISECOM-OSPF-MIB::rcOspfIfMd5AuthAddressLessIf

OID (numeric): 1.3.6.1.4.1.8886.6.1.18.1.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address.

What is rcOspfIfMd5AuthAddressLessIf?

This object takes the value 0 for OSPF interfaces that have an IP address, and the corresponding ifIndex value for addressless interfaces, easing instance identification in the MD5 authentication table. An admin relies on this indexing convention when looking up MD5 key entries for unnumbered OSPF interfaces. For example, an unnumbered point-to-point OSPF link might show this object set to its ifIndex value, such as 5, rather than 0.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.18.1.1.2
snmpwalk -v2c -c public <target> RAISECOM-OSPF-MIB::rcOspfIfMd5AuthAddressLessIf

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.8886.6.1.18.1.1.2.1
snmpget -v2c -c public <target> RAISECOM-OSPF-MIB::rcOspfIfMd5AuthAddressLessIf.1

Start monitoring Raisecom Layer 3 access/aggregation devices with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the RAISECOM-OSPF-MIB::rcOspfIfMd5AuthAddressLessIf OID value, configure state conditions and alerts, and monitor any Raisecom Layer 3 access/aggregation devices from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.8886raisecomRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6iscomSeriesRAISECOM-BASE-MIB
1.3.6.1.4.1.8886.6.1iscomSwitchRAISECOM-BASE-MIB
Numeric OIDNameModule
1.3.6.1.4.1.8886.6.1.18rcOspfRAISECOM-OSPF-MIB
1.3.6.1.4.1.8886.6.1.18.1rcOspfIfMd5AuthTableRAISECOM-OSPF-MIB
1.3.6.1.4.1.8886.6.1.18.1.1rcOspfIfMd5AuthEntryRAISECOM-OSPF-MIB
1.3.6.1.4.1.8886.6.1.18.1.1.2rcOspfIfMd5AuthAddressLessIfRAISECOM-OSPF-MIB