--MibName=rcOspf
-- *****************************************************************
-- RAISECOM-OSPF-MIB.MIB
--
-- JULY. 2003, CHENYU
--
-- Copyright RAISECOM Telecom.
-- All rights reserved.
-- 
-- *****************************************************************--  

RAISECOM-OSPF-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE,IpAddress     FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,RowStatus   FROM SNMPv2-TC
    iscomSwitch	            	FROM RAISECOM-BASE-MIB;

rcOspf MODULE-IDENTITY
    LAST-UPDATED "0412200000Z"
    ORGANIZATION "raisecom"
    CONTACT-INFO
                 ""
    DESCRIPTION
                 "The MIB module for ospf."
    REVISION     "0412200000Z"
    DESCRIPTION
                 ""
    ::= { iscomSwitch 18}      

--textual convention
AreaID ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            " An OSPF Area Identifier."
    SYNTAX  IpAddress
 
RouterID ::= TEXTUAL-CONVENTION
    STATUS       current
    DESCRIPTION
            " A OSPF Router Identifier."
    SYNTAX  IpAddress   
           
         
           
--  OSPF Interface MD5 Authentication Table
rcOspfIfMd5AuthTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RcOspfIfMd5AuthEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The OSPF Interface Authentication Table describes the parameters
           required for MD5 cryptographic Authentication."
    REFERENCE
        "OSPF Version 2, Appendix D.3  Cryptographic Authentication"
    ::=  { rcOspf 1 }

rcOspfIfMd5AuthEntry OBJECT-TYPE
    SYNTAX RcOspfIfMd5AuthEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The OSPF Interface MD5 Auththentication Entry describes one  
          Authentication Key from the viewpoint of OSPF."
    INDEX {rcOspfIfMd5AuthIpAddress,rcOspfIfMd5AuthAddressLessIf,rcOspfIfMd5AuthKeyId}
    ::=  { rcOspfIfMd5AuthTable 1 }

RcOspfIfMd5AuthEntry ::= SEQUENCE {
    rcOspfIfMd5AuthIpAddress IpAddress,
    rcOspfIfMd5AuthAddressLessIf    INTEGER,
    rcOspfIfMd5AuthKeyId    INTEGER,
    rcOspfIfMd5AuthKey    OCTET STRING,
    rcOspfIfMd5AuthKeyRowStatus    RowStatus
    }

rcOspfIfMd5AuthIpAddress OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The IP address of this OSPF interface."
    ::=  { rcOspfIfMd5AuthEntry 1 }

rcOspfIfMd5AuthAddressLessIf OBJECT-TYPE
    SYNTAX INTEGER (0..16)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "For the purpose of easing  the  instancing  of
           addressed   and  addressless  interfaces;  This
           variable takes the value 0 on  interfaces  with
           IP  Addresses,  and  the corresponding value of
           ifIndex for interfaces having no IP Address."
    ::=  { rcOspfIfMd5AuthEntry 2 }

rcOspfIfMd5AuthKeyId OBJECT-TYPE
    SYNTAX INTEGER  (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        " This object identifies the secret key used to create the 
          message digest appended to the OSPF packet."
    ::=  { rcOspfIfMd5AuthEntry 3 }

rcOspfIfMd5AuthKey OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..16))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        " This is the secret key which is used to create the 
          message digest appended to the OSPF packet."
    ::=  { rcOspfIfMd5AuthEntry 4 }



rcOspfIfMd5AuthKeyRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        " Identifies the status of the key "
    ::=  { rcOspfIfMd5AuthEntry 5 }



--  OSPF Virtual Interface Md5 Authentication Table

rcOspfVirtIfMd5AuthTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RcOspfVirtIfMd5AuthEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The OSPF Interface Authentication Table describes the parameters
           required for Md5 cryptographic Authentication."
    REFERENCE
        "OSPF Version 2, Appendix D.3  Cryptographic Authentication"
    ::=  { rcOspf 2 }

rcOspfVirtIfMd5AuthEntry OBJECT-TYPE
    SYNTAX RcOspfVirtIfMd5AuthEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The OSPF Interface Md5 Auththentication Entry describes one  
          Authentication Key from the viewpoint of OSPF."
    INDEX {rcOspfVirtIfMd5AuthAreaId,rcOspfVirtIfMd5AuthNeighbor,rcOspfVirtIfMd5AuthKeyId}
    ::=  { rcOspfVirtIfMd5AuthTable 1 }

RcOspfVirtIfMd5AuthEntry ::= SEQUENCE {
    rcOspfVirtIfMd5AuthAreaId  AreaID,
    rcOspfVirtIfMd5AuthNeighbor    RouterID,
    rcOspfVirtIfMd5AuthKeyId    INTEGER,
    rcOspfVirtIfMd5AuthKey    OCTET STRING,
    rcOspfVirtIfMd5AuthKeyRowStatus    RowStatus
    }

rcOspfVirtIfMd5AuthAreaId OBJECT-TYPE
    SYNTAX AreaID
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The  Transit  Area  that  the   Virtual   Link
           traverses.  By definition, this is not 0.0.0.0."
    ::=  { rcOspfVirtIfMd5AuthEntry 1 }

rcOspfVirtIfMd5AuthNeighbor OBJECT-TYPE
    SYNTAX RouterID
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
               "The Router ID of the Virtual Neighbor."
    ::=  { rcOspfVirtIfMd5AuthEntry 2 }

rcOspfVirtIfMd5AuthKeyId OBJECT-TYPE
    SYNTAX INTEGER (0..65535)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        " This object identifies the secret key used to create the 
          message digest appended to the OSPF packet."
    ::=  { rcOspfVirtIfMd5AuthEntry 3 }

rcOspfVirtIfMd5AuthKey OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..16))
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        " This is the secret key which is used to create the 
          message digest appended to the OSPF packet."
    ::=  { rcOspfVirtIfMd5AuthEntry 4 }



rcOspfVirtIfMd5AuthKeyRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        " Identifies the status of the key "
    ::=  { rcOspfVirtIfMd5AuthEntry 5}


--ospf nssa table
rcOspfNssaAreaTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RcOspfNssaAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The OSPF Nssa Area Table describes nssa area's parameters."
    REFERENCE
        "OSPF Version 2, Appendix D.3  Cryptographic Authentication"
    ::=  { rcOspf 3 }

rcOspfNssaAreaEntry OBJECT-TYPE
    SYNTAX RcOspfNssaAreaEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "The OSPF Nssa Area Entry describes one  
          OSPF Nssa Area."
    INDEX {rcOspfNssaAreaId,rcOspfNssaTos}
    ::=  { rcOspfNssaAreaTable 1 }

RcOspfNssaAreaEntry ::= SEQUENCE {
    rcOspfNssaAreaId  AreaID,
    rcOspfNssaTos    INTEGER,
    rcOspfNssaDefaultCost    INTEGER,
    rcOspfNssaRowStatus     RowStatus
    }

rcOspfNssaAreaId OBJECT-TYPE
    SYNTAX AreaID
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The  Nssa  Area  Id."
    ::=  { rcOspfNssaAreaEntry 1 }  
    
rcOspfNssaTos   OBJECT-TYPE
    SYNTAX INTEGER (0..7)
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
        "The  Nssa  Area  TOS."
    ::=  { rcOspfNssaAreaEntry 2 }         
    
rcOspfNssaDefaultCost   OBJECT-TYPE
    SYNTAX INTEGER  (0..16777215)
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The  Type  of  Service  associated  with   the
 	metric.   On creation, this can be derived from
 	the instance."
    ::=  { rcOspfNssaAreaEntry 3 }  
                                                   
rcOspfNssaRowStatus   OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "This variable displays the status of  the  en-
 	try.  Setting it to 'invalid' has the effect of
 	rendering it inoperative.  The internal  effect
 	(row removal) is implementation dependent."  
 	
    ::=  { rcOspfNssaAreaEntry 4 }   
 
--ospf config
rcOspfConfig  OBJECT IDENTIFIER ::= {rcOspf 4 }            
    
rcOspfDistance   OBJECT-TYPE
    SYNTAX INTEGER  (1..200)
    MAX-ACCESS read-write
    STATUS current
    DESCRIPTION
        "distance of ospf,value range is 1--200."  
 	DEFVAL { 110 }
    ::=  {rcOspfConfig 1 } 

--  OSPF Network Table

rcOspfNetworkTable OBJECT-TYPE
    SYNTAX SEQUENCE OF RcOspfNetworkEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Before a interface startup ospf protocol,the interface must be added to an ospf area.
        The OSPF network Table add a ospf interface into an ospf area."
    ::=  { rcOspf 5 }                                                             

rcOspfNetworkEntry OBJECT-TYPE
    SYNTAX RcOspfNetworkEntry
    MAX-ACCESS not-accessible
    STATUS current
    DESCRIPTION
        "Before a interface startup ospf protocol,the interface must be added to an ospf area.
        The OSPF network Table add a ospf interface into an ospf area."
    INDEX {rcOspfNetworkIfIpAddress,rcOspfNetworkIfMask}
    ::=  { rcOspfNetworkTable 1 }

RcOspfNetworkEntry ::= SEQUENCE {
    rcOspfNetworkIfIpAddress IpAddress,           
    rcOspfNetworkIfMask      IpAddress,
    rcOspfNetworkAreaId    IpAddress,
    rcOspfNetworkRowStatus    RowStatus
    }

rcOspfNetworkIfIpAddress OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "The IP address of this OSPF interface."
    ::=  { rcOspfNetworkEntry 1 }
                                     
rcOspfNetworkIfMask OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "mask of this OSPF interface."
    ::=  { rcOspfNetworkEntry 2 }

rcOspfNetworkAreaId OBJECT-TYPE
    SYNTAX IpAddress
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        "an ospf area that the ospf interface is in."
    ::=  { rcOspfNetworkEntry 3 }

rcOspfNetworkRowStatus OBJECT-TYPE
    SYNTAX RowStatus
    MAX-ACCESS read-create
    STATUS current
    DESCRIPTION
        " This variable displays the status of  the  entry. "
    ::=  { rcOspfNetworkEntry 4 }

END