All MIBs › RADLAN-OSPFV3-LSDB-MIB
Organization: Radlan Computer Communications Ltd.
Last Updated: 2011-05-04
Category: Routing, Vendor: RADLAN/Cisco SB
Description: Provides access to the OSPFv3 link-state database for IPv6 topology inspection.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is RADLAN-OSPFV3-LSDB-MIB?
RADLAN-OSPFV3-LSDB-MIB is a Marvell/RADLAN private enterprise MIB exposing the OSPFv3 (OSPF for IPv6) link-state database of RADLAN-based routing switches, giving visibility into the router-LSAs forming the IPv6 topology as seen by the local OSPFv3 process. It surfaces a router-LSA table keyed by process ID, area ID, link-state ID, and advertising router ID, with each entry carrying the LSA's sequence number, age, checksum, and length. This is a routing-protocol/topology-status MIB rather than a hardware-health MIB: it lets an admin confirm LSAs are generated, refreshed, and aged correctly and checksums are valid, revealing routing-protocol instability or corruption rather than physical faults. It parallels the standard OSPFv3 MIB (RFC 5643) and the LSA aging/flooding model of RFC 5340, though implemented as a RADLAN private extension. The RADLAN-OSPFV3-LSDB-MIB MIB is typically deployed on RADLAN-based Layer 3 switches/routers running OSPFv3 in IPv6-enabled networks.
IPNetwork Monitor allows you to monitor SNMP objects defined in RADLAN-OSPFV3-LSDB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Marvell/RADLAN-based Layer 3 switch/router
- OEM routing switches licensing the RADLAN software stack
Monitoring Examples
An administrator troubleshooting IPv6 routing instability would poll rlOspfv3RouterLsaTable/rlOspfv3RouterLsaEntry, checking rlOspfv3RouterLsaAge and rlOspfv3RouterLsaSequence for a given rlOspfv3RouterLsaRouterId to see whether an LSA refreshes abnormally often (route flapping) or is stuck near max age (a stale/orphaned LSA). rlOspfv3RouterLsaChecksum compared across polls can detect corrupted LSA propagation. rlOspfv3RouterLsaAreaId and rlOspfv3RouterLsaProcessId scope the query to a specific process and area on a multi-area router.
What Can Be Monitored
- OSPFv3 router-LSA age
- LSA sequence number
- LSA checksum
- LSA length
- advertising router ID
- OSPFv3 area/process scoping
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressIPv6 | |
| InetAddressPrefixLength | |
| InetAddressType |
From OSPF-MIB
| AreaID | |
| RouterID |
From RADLAN-MIB
| rnd | OBJECT-IDENTITY |
From RADLAN-OSPF-MIB
| RlOspfProcessID |
From RADLAN-OSPFV3-MIB
| rlOspfv3 | MODULE-IDENTITY |
From RFC1213-MIB
| mib-2 |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| rlOspfv3Lsdb | 1.3.6.1.4.1.89.222 | The private MIB module definition for OSPF LSA Database MIB. | ||
| rlOspfv3RouterLsaTable | 1.3.6.1.4.1.89.222.1 | not-accessible | Router Link State Advertisement. | |
| rlOspfv3RouterLsaEntry | 1.3.6.1.4.1.89.222.1.1 | not-accessible | A single entry from Router LSA. | |
| RLO rlOspfv3RouterLsaProcessId | 1.3.6.1.4.1.89.222.1.1.1 | RlOspfProcessID | read-only | A 32-bit integer uniquely identifying an OSPFv3 process. |
| ARE rlOspfv3RouterLsaAreaId | 1.3.6.1.4.1.89.222.1.1.2 | AreaID | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| IP rlOspfv3RouterLsaLsid | 1.3.6.1.4.1.89.222.1.1.3 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| ROU rlOspfv3RouterLsaRouterId | 1.3.6.1.4.1.89.222.1.1.4 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| U32 rlOspfv3RouterLsaIdx | 1.3.6.1.4.1.89.222.1.1.5 | Unsigned32 | read-only | The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries. |
| U32 rlOspfv3RouterLsaCount | 1.3.6.1.4.1.89.222.1.1.6 | Unsigned32 | read-only | Number of entries containg is the LSA. |
| I32 rlOspfv3RouterLsaSequence | 1.3.6.1.4.1.89.222.1.1.7 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rlOspfv3RouterLsaAge | 1.3.6.1.4.1.89.222.1.1.8 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| I32 rlOspfv3RouterLsaChecksum | 1.3.6.1.4.1.89.222.1.1.9 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| U32 rlOspfv3RouterLsaLength | 1.3.6.1.4.1.89.222.1.1.10 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| INT rlOspfv3RouterLsaBitW | 1.3.6.1.4.1.89.222.1.1.11 | INTEGER | read-only | When set, the router is a wild-card multicast receiver. When running MOSPF, these routers receive all multicast datagrams, regardless of destination. |
| INT rlOspfv3RouterLsaBitV | 1.3.6.1.4.1.89.222.1.1.12 | INTEGER | read-only | When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint). |
| INT rlOspfv3RouterLsaBitE | 1.3.6.1.4.1.89.222.1.1.13 | INTEGER | read-only | When set, the router is an AS boundary router (E is for external). |
| INT rlOspfv3RouterLsaBitB | 1.3.6.1.4.1.89.222.1.1.14 | INTEGER | read-only | When set, the router is an area border router (B is for border). |
| U32 rlOspfv3RouterLsaOptions | 1.3.6.1.4.1.89.222.1.1.15 | Unsigned32 | read-only | The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain. |
| INT rlOspfv3RouterLsaType | 1.3.6.1.4.1.89.222.1.1.16 | INTEGER | read-only | A quick description of the router link. |
| U32 rlOspfv3RouterLsaMetric | 1.3.6.1.4.1.89.222.1.1.17 | Unsigned32 | read-only | The cost of using this router link. |
| U32 rlOspfv3RouterLsaInterfaceID | 1.3.6.1.4.1.89.222.1.1.18 | Unsigned32 | read-only | The Interface ID assigned to the interface being described. |
| U32 rlOspfv3RouterLsaNeighborInterfaceID | 1.3.6.1.4.1.89.222.1.1.19 | Unsigned32 | read-only | The Interface ID the neighbor router (or the attached link's Designated Router, for Type 2 interfaces) has been advertising in hello packets sent on the attached link. |
| ROU rlOspfv3RouterLsaNeighborRouterID | 1.3.6.1.4.1.89.222.1.1.20 | RouterID | read-only | The Router ID the neighbor router (or the attached link's Designated Router, for Type 2 interfaces). |
| rlOspfv3NetworkLsaTable | 1.3.6.1.4.1.89.222.2 | not-accessible | Network Link State Advertisement. | |
| rlOspfv3NetworkLsaEntry | 1.3.6.1.4.1.89.222.2.1 | not-accessible | A single entry from Network LSA. | |
| RLO rlOspfv3NetworkLsaProcessId | 1.3.6.1.4.1.89.222.2.1.1 | RlOspfProcessID | read-only | A 32-bit integer uniquely identifying an OSPFv3 process. |
| ARE rlOspfv3NetworkLsaAreaId | 1.3.6.1.4.1.89.222.2.1.2 | AreaID | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| IP rlOspfv3NetworkLsaLsid | 1.3.6.1.4.1.89.222.2.1.3 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| ROU rlOspfv3NetworkLsaRouterId | 1.3.6.1.4.1.89.222.2.1.4 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| U32 rlOspfv3NetworkLsaIdx | 1.3.6.1.4.1.89.222.2.1.5 | Unsigned32 | read-only | The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries. |
| U32 rlOspfv3NetworkLsaCount | 1.3.6.1.4.1.89.222.2.1.6 | Unsigned32 | read-only | Number of entries containg is the LSA. |
| I32 rlOspfv3NetworkLsaSequence | 1.3.6.1.4.1.89.222.2.1.7 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rlOspfv3NetworkLsaAge | 1.3.6.1.4.1.89.222.2.1.8 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| I32 rlOspfv3NetworkLsaChecksum | 1.3.6.1.4.1.89.222.2.1.9 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| U32 rlOspfv3NetworkLsaLength | 1.3.6.1.4.1.89.222.2.1.10 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| U32 rlOspfv3NetworkLsaOptions | 1.3.6.1.4.1.89.222.2.1.11 | Unsigned32 | read-only | The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain. |
| ROU rlOspfv3NetworkLsaAttRouter | 1.3.6.1.4.1.89.222.2.1.12 | RouterID | read-only | The Router IDs of each of the routers attached to the link. |
| rlOspfv3InterAreaPrefixLsaTable | 1.3.6.1.4.1.89.222.3 | not-accessible | Inter Area Prefix Link State Advertisement. | |
| rlOspfv3InterAreaPrefixLsaEntry | 1.3.6.1.4.1.89.222.3.1 | not-accessible | A single entry from Network LSA. | |
| RLO rlOspfv3InterAreaPrefixLsaProcessId | 1.3.6.1.4.1.89.222.3.1.1 | RlOspfProcessID | read-only | A 32-bit integer uniquely identifying an OSPFv3 process. |
| ARE rlOspfv3InterAreaPrefixLsaAreaId | 1.3.6.1.4.1.89.222.3.1.2 | AreaID | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| IP rlOspfv3InterAreaPrefixLsaLsid | 1.3.6.1.4.1.89.222.3.1.3 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| ROU rlOspfv3InterAreaPrefixLsaRouterId | 1.3.6.1.4.1.89.222.3.1.4 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| I32 rlOspfv3InterAreaPrefixLsaSequence | 1.3.6.1.4.1.89.222.3.1.5 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rlOspfv3InterAreaPrefixLsaAge | 1.3.6.1.4.1.89.222.3.1.6 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| I32 rlOspfv3InterAreaPrefixLsaChecksum | 1.3.6.1.4.1.89.222.3.1.7 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| U32 rlOspfv3InterAreaPrefixLsaLength | 1.3.6.1.4.1.89.222.3.1.8 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| U32 rlOspfv3InterAreaPrefixLsaMetric | 1.3.6.1.4.1.89.222.3.1.9 | Unsigned32 | read-only | The cost of this route. Expressed in the same units as the interface costs in the router-LSAs. |
| U32 rlOspfv3InterAreaPrefixLsaPrefixLength | 1.3.6.1.4.1.89.222.3.1.10 | Unsigned32 | read-only | IPv6 address prefix length. |
| U32 rlOspfv3InterAreaPrefixLsaPrefixOptions | 1.3.6.1.4.1.89.222.3.1.11 | Unsigned32 | read-only | IPv6 address prefix options. |
| IP rlOspfv3InterAreaPrefixLsaAddressPrefix | 1.3.6.1.4.1.89.222.3.1.12 | InetAddress | read-only | IPv6 address prefix - bit strings of length 128. |
| rlOspfv3InterAreaRouterLsaTable | 1.3.6.1.4.1.89.222.4 | not-accessible | Inter Area Router Link State Advertisement. | |
| rlOspfv3InterAreaRouterLsaEntry | 1.3.6.1.4.1.89.222.4.1 | not-accessible | A single entry from Network LSA. | |
| RLO rlOspfv3InterAreaRouterLsaProcessId | 1.3.6.1.4.1.89.222.4.1.1 | RlOspfProcessID | read-only | A 32-bit integer uniquely identifying an OSPFv3 process. |
| ARE rlOspfv3InterAreaRouterLsaAreaId | 1.3.6.1.4.1.89.222.4.1.2 | AreaID | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| IP rlOspfv3InterAreaRouterLsaLsid | 1.3.6.1.4.1.89.222.4.1.3 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| ROU rlOspfv3InterAreaRouterLsaRouterId | 1.3.6.1.4.1.89.222.4.1.4 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| I32 rlOspfv3InterAreaRouterLsaSequence | 1.3.6.1.4.1.89.222.4.1.5 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rlOspfv3InterAreaRouterLsaAge | 1.3.6.1.4.1.89.222.4.1.6 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| I32 rlOspfv3InterAreaRouterLsaChecksum | 1.3.6.1.4.1.89.222.4.1.7 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| U32 rlOspfv3InterAreaRouterLsaLength | 1.3.6.1.4.1.89.222.4.1.8 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| U32 rlOspfv3InterAreaRouterLsaOptions | 1.3.6.1.4.1.89.222.4.1.9 | Unsigned32 | read-only | The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain. |
| U32 rlOspfv3InterAreaRouterLsaMetric | 1.3.6.1.4.1.89.222.4.1.10 | Unsigned32 | read-only | The cost of this route. Expressed in the same units as the interface costs in the router-LSAs. |
| ROU rlOspfv3InterAreaRouterLsaDestinationRouterId | 1.3.6.1.4.1.89.222.4.1.11 | RouterID | read-only | The Router ID of the router being described by the LSA. |
| rlOspfv3AsExternalLsaTable | 1.3.6.1.4.1.89.222.5 | not-accessible | AS External Link State Advertisement. | |
| rlOspfv3AsExternalLsaEntry | 1.3.6.1.4.1.89.222.5.1 | not-accessible | A single entry from Router LSA. | |
| RLO rlOspfv3AsExternalLsaProcessId | 1.3.6.1.4.1.89.222.5.1.1 | RlOspfProcessID | read-only | A 32-bit integer uniquely identifying an OSPFv3 process. |
| ARE rlOspfv3AsExternalLsaAreaId | 1.3.6.1.4.1.89.222.5.1.2 | AreaID | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| IP rlOspfv3AsExternalLsaLsid | 1.3.6.1.4.1.89.222.5.1.3 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| ROU rlOspfv3AsExternalLsaRouterId | 1.3.6.1.4.1.89.222.5.1.4 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| I32 rlOspfv3AsExternalLsaSequence | 1.3.6.1.4.1.89.222.5.1.5 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rlOspfv3AsExternalLsaAge | 1.3.6.1.4.1.89.222.5.1.6 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| I32 rlOspfv3AsExternalLsaChecksum | 1.3.6.1.4.1.89.222.5.1.7 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| U32 rlOspfv3AsExternalLsaLength | 1.3.6.1.4.1.89.222.5.1.8 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| INT rlOspfv3AsExternalLsaBitE | 1.3.6.1.4.1.89.222.5.1.9 | INTEGER | read-only | The type of external metric. If bit E is set, the metric specified is a Type 2 external metric. |
| INT rlOspfv3AsExternalLsaBitF | 1.3.6.1.4.1.89.222.5.1.10 | INTEGER | read-only | If set, a Forwarding Address has been included in the LSA. |
| INT rlOspfv3AsExternalLsaBitT | 1.3.6.1.4.1.89.222.5.1.11 | INTEGER | read-only | If set, an External Route Tag has been included in the LSA. |
| U32 rlOspfv3AsExternalLsaMetric | 1.3.6.1.4.1.89.222.5.1.12 | Unsigned32 | read-only | The cost of this route. Interpretation depends on the external type indication (bit E above). |
| U32 rlOspfv3AsExternalLsaReferencedLsType | 1.3.6.1.4.1.89.222.5.1.13 | Unsigned32 | read-only | If non-zero, an LSA with this LS type is to be associated with this LSA (see Referenced Link State ID below). |
| U32 rlOspfv3AsExternalLsaPrefixLength | 1.3.6.1.4.1.89.222.5.1.14 | Unsigned32 | read-only | IPv6 address prefix length. |
| U32 rlOspfv3AsExternalLsaPrefixOptions | 1.3.6.1.4.1.89.222.5.1.15 | Unsigned32 | read-only | IPv6 address prefix options. |
| IP rlOspfv3AsExternalLsaAddressPrefix | 1.3.6.1.4.1.89.222.5.1.16 | InetAddress | read-only | IPv6 address prefix - bit strings of length 128. |
| IP rlOspfv3AsExternalLsaForwardingAddress | 1.3.6.1.4.1.89.222.5.1.17 | InetAddress | read-only | A fully qualified IPv6 address (128 bits). Included in the LSA if and only if bit F has been set. |
| U32 rlOspfv3AsExternalLsaExternalRouteTag | 1.3.6.1.4.1.89.222.5.1.18 | Unsigned32 | read-only | A 32-bit field which may be used to communicate additional information between AS boundary routers. |
| U32 rlOspfv3AsExternalLsaReferencedLinkStateId | 1.3.6.1.4.1.89.222.5.1.19 | Unsigned32 | read-only | Included if and only if Reference LS Type is non-zero. |
| rlOspfv3LinkLsaTable | 1.3.6.1.4.1.89.222.6 | not-accessible | Link (Type 8) Link State Advertisement. | |
| rlOspfv3LinkLsaEntry | 1.3.6.1.4.1.89.222.6.1 | not-accessible | A single entry from Network LSA. | |
| RLO rlOspfv3LinkLsaProcessId | 1.3.6.1.4.1.89.222.6.1.1 | RlOspfProcessID | read-only | A 32-bit integer uniquely identifying an OSPFv3 process. |
| U32 rlOspfv3LinkLsaIfIndex | 1.3.6.1.4.1.89.222.6.1.2 | Unsigned32 | not-accessible | The identifier of the link from which the LSA was received. |
| I32 rlOspfv3LinkLsaIfInstId | 1.3.6.1.4.1.89.222.6.1.3 | Integer32 | not-accessible | OSPFv3 protocol instance ID specified in the OSPF header of the packet in which this LSA was received. |
| IP rlOspfv3LinkLsaLsid | 1.3.6.1.4.1.89.222.6.1.4 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| ROU rlOspfv3LinkLsaRouterId | 1.3.6.1.4.1.89.222.6.1.5 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| U32 rlOspfv3LinkLsaIdx | 1.3.6.1.4.1.89.222.6.1.6 | Unsigned32 | read-only | The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries. |
| U32 rlOspfv3LinkLsaCount | 1.3.6.1.4.1.89.222.6.1.7 | Unsigned32 | read-only | Number of entries containg is the LSA. |
| I32 rlOspfv3LinkLsaSequence | 1.3.6.1.4.1.89.222.6.1.8 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rlOspfv3LinkLsaAge | 1.3.6.1.4.1.89.222.6.1.9 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| I32 rlOspfv3LinkLsaChecksum | 1.3.6.1.4.1.89.222.6.1.10 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| U32 rlOspfv3LinkLsaLength | 1.3.6.1.4.1.89.222.6.1.11 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| U32 rlOspfv3LinkLsaRtrPri | 1.3.6.1.4.1.89.222.6.1.12 | Unsigned32 | read-only | The Router Priority of the interface attaching the originating router to the link. |
| U32 rlOspfv3LinkLsaOptions | 1.3.6.1.4.1.89.222.6.1.13 | Unsigned32 | read-only | The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain. |
| IP rlOspfv3LinkLsaLinkLocalInterfaceAddress | 1.3.6.1.4.1.89.222.6.1.14 | InetAddress | read-only | Link Local Interface Address. The originating router's link-local interface address on the link. |
| U32 rlOspfv3LinkLsaPrefixLength | 1.3.6.1.4.1.89.222.6.1.15 | Unsigned32 | read-only | IPv6 address prefix length. |
| U32 rlOspfv3LinkLsaPrefixOptions | 1.3.6.1.4.1.89.222.6.1.16 | Unsigned32 | read-only | IPv6 address prefix options. |
| IP rlOspfv3LinkLsaAddressPrefix | 1.3.6.1.4.1.89.222.6.1.17 | InetAddress | read-only | IPv6 address prefix - bit strings of length 128. |
| rlOspfv3IntraAreaPrefixLsaTable | 1.3.6.1.4.1.89.222.7 | not-accessible | Intra Area Prefix Link State Advertisement. | |
| rlOspfv3IntraAreaPrefixLsaEntry | 1.3.6.1.4.1.89.222.7.1 | not-accessible | A single entry from Network LSA. | |
| RLO rlOspfv3IntraAreaPrefixLsaProcessId | 1.3.6.1.4.1.89.222.7.1.1 | RlOspfProcessID | read-only | A 32-bit integer uniquely identifying an OSPFv3 process. |
| ARE rlOspfv3IntraAreaPrefixLsaAreaId | 1.3.6.1.4.1.89.222.7.1.2 | AreaID | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| IP rlOspfv3IntraAreaPrefixLsaLsid | 1.3.6.1.4.1.89.222.7.1.3 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| ROU rlOspfv3IntraAreaPrefixLsaRouterId | 1.3.6.1.4.1.89.222.7.1.4 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| U32 rlOspfv3IntraAreaPrefixLsaIdx | 1.3.6.1.4.1.89.222.7.1.5 | Unsigned32 | read-only | The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries. |
| U32 rlOspfv3IntraAreaPrefixLsaCount | 1.3.6.1.4.1.89.222.7.1.6 | Unsigned32 | read-only | Number of entries containg is the LSA. |
| I32 rlOspfv3IntraAreaPrefixLsaSequence | 1.3.6.1.4.1.89.222.7.1.7 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| I32 rlOspfv3IntraAreaPrefixLsaAge | 1.3.6.1.4.1.89.222.7.1.8 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| I32 rlOspfv3IntraAreaPrefixLsaChecksum | 1.3.6.1.4.1.89.222.7.1.9 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| U32 rlOspfv3IntraAreaPrefixLsaLength | 1.3.6.1.4.1.89.222.7.1.10 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| U32 rlOspfv3IntraAreaPrefixLsaNumPrefixes | 1.3.6.1.4.1.89.222.7.1.11 | Unsigned32 | read-only | Number of IPv6 address prefixes contained in the LSA. |
| U32 rlOspfv3IntraAreaPrefixLsaReferenceLsType | 1.3.6.1.4.1.89.222.7.1.12 | Unsigned32 | read-only | Referenced LS Type: If the Referenced LS type is 1, the prefixes are associated with a router-LSA. If Referenced LS type is 2, the prefixes are associated with a network-LSA. |
| U32 rlOspfv3IntraAreaPrefixLsaReferenceLsId | 1.3.6.1.4.1.89.222.7.1.13 | Unsigned32 | read-only | Referenced Link State ID: If the prefixes are associated with a router-LSA, the Referenced Link State ID should be 0. If the prefixes are associated with a network-LSA, the Referenced Link State ID should be the Interface ID of the link's Designated Router. |
| U32 rlOspfv3IntraAreaPrefixLsaReferenceAdvRouter | 1.3.6.1.4.1.89.222.7.1.14 | Unsigned32 | read-only | Referenced Advertising Router: If the prefixes are associated with a router-LSA, the Referenced Advertising Router should be the originating router's Router ID. If the prefixes are associated with a network-LSA, Referenced Advertising Router should be the Designated Router's Router ID. |
| U32 rlOspfv3IntraAreaPrefixLsaMetric | 1.3.6.1.4.1.89.222.7.1.15 | Unsigned32 | read-only | The cost of this route. Expressed in the same units as the interface costs in the router-LSAs. |
| U32 rlOspfv3IntraAreaPrefixLsaPrefixLength | 1.3.6.1.4.1.89.222.7.1.16 | Unsigned32 | read-only | IPv6 address prefix length. |
| U32 rlOspfv3IntraAreaPrefixLsaPrefixOptions | 1.3.6.1.4.1.89.222.7.1.17 | Unsigned32 | read-only | IPv6 address prefix options. |
| IP rlOspfv3IntraAreaPrefixLsaAddressPrefix | 1.3.6.1.4.1.89.222.7.1.18 | InetAddress | read-only | IPv6 address prefix - bit strings of length 128. |
RFC description
Provides access to the OSPFv3 Link State Database (LSDB) including router and network LSAs on Radlan devices.
Start monitoring Marvell/RADLAN-based Layer 3 switch/router, OEM routing switches (OSPFv3 link-state database) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.