qosEth2Mode
Module: QOS
OID (symbolic): QOS::qosEth2Mode
OID (numeric): 1.3.6.1.4.1.25651.1.2.3.5.8.3
Node type: OBJECT-TYPE
Type: QosModeT
Access: read-write
Description: This setting set the qos mode or disable QoS on ETH2.
What is qosEth2Mode?
Sets the QoS classification mode used on the ETH2 port, or disables QoS on it entirely, mirroring qosEth1Mode but for the device's second Ethernet interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25651.1.2.3.5.8.3 snmpwalk -v2c -c public <target> QOS::qosEth2Mode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25651.1.2.3.5.8.3.1 snmpget -v2c -c public <target> QOS::qosEth2Mode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25651.1.2.3.5.8.3.1 s <value>
Start monitoring vendor-neutral base MIB structure, router/switch implementing QoS policy management with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QOS::qosEth2Mode OID value, configure state conditions and alerts, and monitor any vendor-neutral base MIB structure, router/switch implementing QoS policy management from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25651 | exaltcommunications | ExaltComm |
| 1.3.6.1.4.1.25651.1 | productsMIB | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2 | productsMIBObjects | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2.3 | radioConfig | ExaltComProducts |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25651.1.2.3.5 | advSystemConfig | QOS |
| 1.3.6.1.4.1.25651.1.2.3.5.8 | extAirG2QoS | QOS |
| 1.3.6.1.4.1.25651.1.2.3.5.8.3 | qosEth2Mode | QOS |