qosEth1Mode
Module: QOS
OID (symbolic): QOS::qosEth1Mode
OID (numeric): 1.3.6.1.4.1.25651.1.2.3.5.8.2
Node type: OBJECT-TYPE
Type: QosModeT
Access: read-write
Description: This setting set the qos mode or disable QoS on ETH1.
What is qosEth1Mode?
Sets the QoS classification mode used on the ETH1 port, or disables QoS on it entirely. An admin would enable a specific mode (e.g. DiffServ- or 802.1p-based) here before the corresponding classification tables on ETH1 take effect.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25651.1.2.3.5.8.2 snmpwalk -v2c -c public <target> QOS::qosEth1Mode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25651.1.2.3.5.8.2.1 snmpget -v2c -c public <target> QOS::qosEth1Mode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25651.1.2.3.5.8.2.1 s <value>
Start monitoring vendor-neutral base MIB structure, router/switch implementing QoS policy management with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the QOS::qosEth1Mode OID value, configure state conditions and alerts, and monitor any vendor-neutral base MIB structure, router/switch implementing QoS policy management from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25651 | exaltcommunications | ExaltComm |
| 1.3.6.1.4.1.25651.1 | productsMIB | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2 | productsMIBObjects | ExaltComProducts |
| 1.3.6.1.4.1.25651.1.2.3 | radioConfig | ExaltComProducts |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25651.1.2.3.5 | advSystemConfig | QOS |
| 1.3.6.1.4.1.25651.1.2.3.5.8 | extAirG2QoS | QOS |
| 1.3.6.1.4.1.25651.1.2.3.5.8.2 | qosEth1Mode | QOS |